**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright 2019 Stanisci Design all rights reserved
Range Hood Index
1
INTRODUCTION:New Products / Common Questions 2-6Common Questions 7-10
GENERAL INFORMATION:Door Style 11Molding Style 12Order Sheet 13Quick Quote Form 14
HOODS:Ashland (A-Series) 15-16Birmingham (B-Series) 17-18Bristol (BX-Series) 19-20Cambridge (C-Series) 21-22Dalton (D-Series) 23-24Elevation (E-Series) 25-26Georgetown (G-Series) 27-30Hartford (H-Series) 31-32Huntington (H2-Series) 33-34Island (I-Series) 35-36Jacksonville (J-Series) 37-40Lexington (L-Series) 41-42Madison (M-Series) 43-45Naples (N-Series) 47-48Oxford (O-Series) 49-50Plymouth (P-Series) 51-52Quebec (Q-Series) 53-54Rochester (R-Series) 55-56Springfield (S-Series) 57-58Thompson (T-Series 59-62Utah (U-Series) 63-65Value Line Chimney on glossy paper at end of hood sectionValue Line Mantel on glossy paper at end of hood sectionWashington (W-Series) 67-68X-Cross (X-Series) 69-70Zenith (Z200-Series) 71-72Zombroan (Z300-Series) 73-74Sorrento hood supports 75-77CUSTOM 79-80
VENTILATION: Stainless Base Hoods 81-82Mesh Liner 83-84Baffle Liner 85-87Value Liner 89-90General Vent info 91-93
ARCHED VALANCES 95-96
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright 2019 Stanisci Design all rights reserved2
New Products in this Catalog
BX hood BX hood with Stainless baffle base option
BX hood with beading option
C hood with stainless baffle base option
CHW hoodCHW hood with beading option
CPL hood with beading option
CSL hood with beading option
BX and C Range Hoods
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright 2019 Stanisci Design all rights reserved3
New Products in this Catalog
Understanding Removable options
See spec sheets for detailsConcealed Access: Access hidden in bead board or upper panel held with clips
Removable Upper: Seam behind shelf or an applied panel door
ARP – Decorative Molding Removable Access Panel
RF (Removable Front) - Entire front fascia lifts straight up 3/4" and removes. Vent is easily installed and fascia in replaced. J-Series has a 14" deep rear box and P, Z200 has a 16". There is a 5/16" reveal on the front frame to box.
RT - (Removable Top) - Base of hood is installed along with ventilation. After hookups the Top of hood is placed on top. 3/4" clearance is needed between hood top and ceiling.
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright 2019 Stanisci Design all rights reserved4
New Products in this Catalog
Understanding Removable options
RF (Removable Front) Option- Entire front fascia lifts straight up 3/4" and removes. Vent is easily installed and fascia in replaced. J-Series has a 14" deep rear box and P, Z200 has a 16". There is a 5/16" reveal on the front frame to box.
RT – Base of the hood will be installed with the ventilation. After all hook ups are complete – the chimney top will be attached. You will need a minimum of ¾” clearance to lower chimney on guides.
NOTE: On RT and RF hood there are important structural components which cannot be compromised. Any cutting or moving of any structural component will immediately void all warranties and may compromise the structural integrity of the hood.
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright 2019 Stanisci Design all rights reserved5
New Products in this Catalog
Understanding Removable options
Hood Concealed
Access
MRP‐
Removable
Upper
Panel
ARP‐
Decorative
Applied
Molding
RF‐
Removable
Front
RT‐
Removable
top
Not
Removable
A Standard
B X
BX X
C Option Option
D X
E Option
G Option Option
H Standard
H2 Standard
I Option
J Option Option
L Standard
M Option
MDP X
N Standard
O Standard
P Option Option
Q Option
R Option
S Standard
T Option Option
U Standard
VCHIM X
X X
Z200 Option
Z300 X
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright 2019 Stanisci Design all rights reserved6
New Products in this Catalog
New Framing Beads
447
Hybrid Panels for Paint Grade Hoods
- Paint Grade hoods can now be ordered with hybrid doors. These doors will have hard maple frames and
MDF panels, flat or raises. Paint Grade maple hardwood panels – (flat or raised) are still available
MDF/HDF for Paint Grade Hoods
Now available as an optional paint grade material for the body of our hood, to replace 1/2" maple veneered MDF, MDF without veneer, to replace 3/4" Maple Plywood, 3/4" plywood with HDF (high density fiber outer layer. Both of these materials.....Paint grade with maple veneer is still available.
NEW STANDARD SIZES - New standard sizes on the P, S, Z200 and J hoods. Even size widths are now standard 36, 42, 48, 54 and 60”
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
Common Questions:BUILDING CODES: Each city, state have their own building codes. Those codes will supersede any recommendations made in this catalog. Please refer building code questions to your local inspector since they will be responsible for the interpretation of the code.
FINISHING – Stanisci Design does not offer any finishing. Your hood will be sanded to 180 grit. We will drop ship into the kitchen dealer or to the cabinet manufacturer that you have specified.
PANELS – When ordering a hood with a door – you can pick any of the frame choices with any of the panels. For example a shaker style door would be 445 / flat
MOLDINGS – The majority of hoods can be purchased with several different molding styles Classical, Simple or Basic. A hardwood base option (no molding) is also available. Molding is on base of hood – not the top crown. Top crown is supplied in field.
HOOD HEIGHT: All calculations for height are assuming you are mounting the hood 30” above range or 66” off of the floor. Some cook tops or local building codes may require you mount the hood higher. Please include their additional requirements in all of your calculations.
PAINT GRADE PANELS – When choosing paint grade – you can select either MDF or Hardwood for your raised or flat panels depending on your finishers preference
RENDERINGS: Libraries are available for most rendering systems. 2020 is available on our website while most others are available on the software’s partner website.
MODIFICATIONS: Yes. We will modify hoods as requested.
VENTILATION OPTIONS: We have value liners, stainless mesh and stainless baffle liners from 300-1500 cfm. We can also custom design around most vents.
VENTILATION: Our ventilation is in stock and can be shipped same day if ordered in the AM.
TSCA / CARB: Our hoods are TSCA /CARB compliant and will come with all appropriate labels.
REMOVABLE Options: There are several options with removable panels depending on the style of hood. Most hoods have one or several options. Refer to page 3.
SALES: Stanisci Design hoods are exclusively sold ONLY TO KITCHEN PROFESSIONALS. Stanisci Design is happy to consult with your retail customer to answer any ventilation questions or questions about the construction of the product however Stanisci Design does not have retail pricing nor will we discuss retail pricing with a customer.
Wood Range Hoods and Accessories
Common Questions:
7
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright 2019 Stanisci Design all rights reserved
Common Questions
Differences between chimney hoods
Z300 hood G hood T hood C hood
• Chimney hoods have several different base types available within each style. For example you can get a RSS on a G, T or C hood.
• The main differences are the size and shape of the pyramid
• Z300, G and T hood come standard with vertical grain but horizontal can be requested
• C hoods come standard with horizontal grain but vertical can be requested
CHIMNEY HOODS : Differences between our chimney hoods – All the hoods shown below are shown at 42” wide and 42” tall.
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright 2019 Stanisci Design all rights reserved
Common Questions
Hood sides are 3/4” veneer core A faces or MDF/HDF.
All door components are made in house to control color and
consistency
Doweled constructionfor tight even seams
Distinctive hardwood moldingsavailable in three designs
Stanisci Design uses only the finest materials. Range hoods often become the focal point of the kitchen. All solid wood components are hand selected for color. All Stanisci Design Products are TSCA (C.A.R.B) compliant. Hoods are sanded to 180 grit, ready to be finished
¾” plywood back stretchers.All structural parts are ¾” plywood
H2RA shown with Sorrento Hood Supports (hybrid panels) and Traditional Corbels
9
12 STOCK SPECIES – others available upon request:• Maple• Paint Grade Maple• MDF / HDF • Red Oak• Qtr Sawn Red Oak• Qtr Sawn White Oak• Hickory• Cherry• Alder• Rustic Alder• European Beech• Walnut
Materials & Construction
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright 2019 Stanisci Design all rights reserved
Common Questions
BASE OPTIONS: Many different base options. Most bases can be ordered on almost all hoods.
G hood T hoo
DP2 BaseRA Base RS Base
RSS Base SL Base DP1 Base
PL Base HW Base SS Base(Stainless Baffle Base)
Standard Base available with several different molding options
Differences base options
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright 2019 Stanisci Design all rights reserved
Door Styles
FRAMES PANELS
Fax #: (248) 572-6884
11
Hybrid Panel - MDF Center Panel with Hardwood stiles
Hardwood Frame & HW Center Panel
Stain Grade or Paint Grade
Framing style
Panel style
445 / Flat is shown
448
S Series hood shown for explanation purposes only
450
446
445
443
441
447
BASIC
BEAD
COVE
OGEE
FLAT
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright 2019 Stanisci Design all rights reserved
Moldings – On base Three molding packages available
These moldings are supplied on the C, G, T, I, E, J, S, A, W and H, H2 Series
1 Classic 2 Simple
These moldings are supplied on the B, D, L, N, O, R, U, X Series
1 Classic 2 Simple
12
1 - Classical 2 - Simple 3 - Basic
3 Basic
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 201713
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright 2019 Stanisci Design all rights reserved
This page left intentionally blank
14
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
Ashland
A-Series Wall Mount Range Hood
A-Series with standard base, molding package 1
Top crown molding is not included*
Panel removes for easier installation,
beads hide the seam
3-1/4” tall flat for crown to wrap
3” niche depth8-1/2” shelf depth overall
15
A SeriesStandard Widths 33, 36, 39, 42, 45, 48, 51, 54, 57, 60, 63 or custom
Standard Heights 30, 36, 42, 48 or custom (24” will not have removable panel)
Removable panelIs standard‐ there will be two seams in beading to allow for access.
Standard assumptions Base Height – 10”Distance between moldings 8‐1/8
Depth of rear box 18‐3/4”
Depth of hood 22.25"
Depth of hood to tips of moldings 23‐3/8"
Distance moldings protrude past sides 0
Ventilator Stanisci Stainless Mesh, Baffle or Value liner ‐ order 3” less than hood width example 39” hood gets 36” vent
Baffle liner Adjustment RA base – increase base height by 1”DP1 increase base height by 2”
Available Moldings Classic, Simple or Basic
Available Options ‐Sorrento pull out spice racks
Available customization Yes – recommended if using aftermarket vent
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
A- Standard Hood
A 33A 39A 45A 51A 57A 63
A- Applied Grape Base Carving
AEB 33AEB 39AEB 45AEB 51AEB 57AEB 63
A- Raised Panel Arched Base
ARA 33ARA 39ARA 45ARA 51ARA 57ARA 63
Ashland
A- Acanthus Base
AAB 33AAB 39AAB 45AAB 51AAB 57AAB 63
A- Acanthus Base and Top
AABT 33AABT 39AABT 45AABT 51AABT 57AABT 63
Standard heights of 30, 36 and 42” (custom heights available)
A- Decorative Panel Base
ADP1 33ADP1 39ADP1 45ADP1 51ADP1 57ADP1 63
Sorrento Hood Supports are available for this hood. See page 63 for details
16
A-Series
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
Birmingham
B- Series Wall Mount
B-Series hood 36 x 42 depicted
with DP1 base and classic molding package 1
top crown molding not included *
BDP1-Series 54 x 42 shown with classic molding package 1, corbels and Sorrento Hood Supports
17
B SeriesStandard Widths 36, 42, 48, 54 and 60 or custom
Standard Heights 30, 36, 42, 48 or custom Order height needed – do not cut down in field
Removable Top Option Not Available
Standard assumptions Grain will be vertical unless specifiedBase height – 6” for Hardwood or Stainless baseBase height – 11.5” if DP1, DP2 or RA
Depth of hood 22.25"
Depth of hood to tips of moldings Hardwood NAClassical (24‐11/16)Simple (24‐7/16)
Distance moldings protrude past sides SS or Hardwood ‐ 0 Classical add 4‐3/4 Simple 4‐5/16
Ventilator Stanisci Stainless Mesh, Baffle or Value liner
Baffle liner Adjustment Hardwood increase base height by 2‐3/4RA base – increase base height by 1” DP1 increase base height by 2”
Available Moldings Hardwood (no molding ) Classic, or Simple
Available option ‐Veneer delete on upper section if using plaster – center molding will be shipped loose (Not suitable for painting)‐Stainless Baffle Base‐Sorrento pull out spice racks
Available customization Yes – recommended if using aftermarket vent
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
Birmingham
Standard heights of 30, 36 and 42” (custom heights available)
BSS- With Stainless Baffle base
BSS 36BSS 42BSS 48BSS 54BSS 60
B- Decorative Panel Base 1
BDP1 36BDP1 42BDP1 48BDP1 54BDP1 60
B- Decorative Panel Base 2
BDP2 36BDP2 42BDP2 48BDP2 54BDP2 60
Sorrento Hood Supports are available for this hood.
B- Raised Arched Base
BRA 36BRA 42BRA 48BRA 54BRA 60
18
B- Series
B- Standard Hood with Hardwood base
B 36B 42B 48B 54B 60
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
BristalBX –Series Wall Mount Hood
BX-Series
19
BX SeriesStandard Widths 30, 36, 42, 48, 54 and 60 or custom
Standard Heights 24, 30, 36, 42, 48 or custom
Removable panel Not available on this hood
Standard assumptions Grain will be horizontal unless vertical is specifiedHeights over 48” will require an additional extension.Optional beading will be V grove6” Hardwood base option – order 8.75 if getting baffle
Depth of hood 22.25"
Depth of hood to tips of moldings NA
Distance moldings protrude past sides 0
Ventilator Stanisci Stainless Mesh, Baffle or Value liner
Available option‐Horizontal beading (grain must be horizontal when horizontal beading option selected)‐Stainless Steel baffle base
Available customization Yes – recommended if using aftermarket vent
BX-Series with beading option
BX-Series with stainless baffle base option
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
BX- Standard Hood
BX 30BX 36BX 42BX 48BX 54BX 60
Standard heights of 24, 30, 36 and 42” (custom heights available)
BX - With horizontal beaded option
BX 30BX 36BX 42BX 48BX 54BX 60
20
BX –Series
Bristal
BXSS- With Stainless Steel baffle base*
BXSS 30BXSS 36BXSS 42BXSS 48BXSS 54BXSS 60
BXSS- With Stainless Steel baffle base* & horizontal beading option
BXSS 30BXSS 36BXSS 42BXSS 48BXSS 54BXSS 60
* Baffle base is a full liner (lights, switches, baffles and only needs addition of a blower. Blower options: 300 (with reducer), 600, 1000, 1200, 1200 Remote and 1500 Remote
BXHW- Hardwood base
BXHW 30BXHW 36BXHW 42BXHW 48BXHW 54BXHW 60
BXHW- Hardwood base with beaded option
BXHW 30BXHW 36BXHW 42BXHW 48BXHW 54BXHW 60
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
Cambridge
C-Series Wall Mount
CHW Series hood
21
C SeriesStandard Widths 30, 36, 42, 48, 54 and 60 or custom
Standard Heights 24, 30, 36, 42, 48, 54 or custom
Removable Top option ‐ RT ‐N/C option which is available ‐ 30” Wide hood with RT option will not fit value liner. It will fit mesh or baffle (with increased height)‐requires ¾” of distance from top of hood to ceiling in order to lift hood over guide clips*On RT hoods there are important structural components which cannot be compromised. Any cutting or moving of any structural component will immediately void all warranties and may compromise the structural integrity of the hood.
Standard assumptions Grain will be horizontal unless specifiedMoldings on CSL and CPL will be basic unless specifiedOptional beading will be a v groove
Depth of hood 22.25"
Depth of hood to tips of moldings Hardwood – 22‐1/4” (no moldings)CSL and CPL ‐ 23‐3/8”
Distance moldings protrude past sides SS or Hardwood ‐ 0 Classical , Simple & Basic ‐ add 2‐1/4” to overall
Chimney Height 4” (3‐3/4” exposed since ¼” behind molding)
Chimney Width CHW and Stainless base ‐ 13” less than base of hood CPL & CSL 14‐1/2” less than width not including moldings
Ventilator Stanisci Value liner, Stainless Mesh or stainless baffle (see below)Note: 30” wide will not accommodate a 1000 CFM unit
Baffle liner Adjustment CHW increase base height by 2‐3/4 for BaffleCPL increase base height by 2‐3/4 for baffleCSL increase base height by 2” for baffle
Available Moldings Hardwood (none), Classic, Simple or Basic
Available option ‐RT‐ Removable topHorizontal beading (grain must be horizontal when horizontal beading option selected)‐Sorrento pull out spice racks
Available customization Yes – recommended if using aftermarket vent
CPL Series with beading option C Series with stainless baffle base
CSL Series with beading option
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
CHW- C with 6” Hardwood base
CHW 30CHW 36CHW 42CHW 48CHW 54CHW 60
Standard heights of 30, 36 ,42”, 48 and 54” (custom heights available)
CSL- With 8” Slab arch base
CSL 30CSL 36CSL 42CSL 48CSL 54CSL 60
22
CPL- With 6” Base & basic moldings
CPL 30CPL 36CPL 42CPL 48CPL 54CPL 60
Cambridge
C-Series
CSS- C with 6” Stainless Baffle Base
CHW 36CHW 42CHW 48CHW 54CHW 60
* Baffle base is a full liner (lights, switches, baffles and only needs addition of a blower. Blower options: 300 (with reducer), 600, 1000, 1200, 1200 Remote and 1500 Remote
CHW- C with 6” Hardwood base & bead option
CHW 30CHW 36CHW 42CHW 48CHW 54CHW 60
CPL- With 6” Base, basic moldings and bead option
CPL 30CPL 36CPL 42CPL 48CPL 54CPL 60
CSL- With 8” Slab arch base
CSL 30CSL 36CSL 42CSL 48CSL 54CSL 60
CSS- C with 6” Stainless Baffle Base and beadoption
CHW 36CHW 42CHW 48CHW 54CHW 60
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
DaltonD-Series Curved Wall Mount
D-Series hood 36 x 42 depictedwith decorative panel base and molding package 2.
top crown molding not included*
DSP1-Series 54 x 48 shown with molding package 1, CBL-PRV7 and Corbel Plinth blocks.
Top crown molding not included*
23
D SeriesStandard Widths 36, 42, 48, 54 and 60 or custom
Standard Heights 30, 36, 42, 48 or custom – Order height needed – do not cut down in field
Removable panel Not available on this style hood
Standard Assumptions Grain will be vertical unless specified otherwise
Depth of hood 22.25"
Depth of hood to tips of moldings Hardwood or Stainless base (22‐1/4)Classical (24‐11/16)Simple (24‐7/16)
Distance moldings protrude past sides SS or Hardwood ‐ 0 Classical add 4‐3/4 Simple & Basic 4‐5/6
Ventilator Stanisci Stainless Mesh, Baffle or Value liner
Baffle liner Adjustment Hardwood increase base height by 2‐3/4RA base – increase base height by 1” DP1 increase base height by 2”
Available Moldings Hardwood (none), Classic or Simple
Available option ‐Veneer delete on upper section if using plaster – center molding will be shipped loose (Not suitable for painting)‐Stainless Baffle base‐Sorrento pull out spice racks
Available customizationYes – recommended if using aftermarket vent
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
D- Standard Hood
D 36D 42D 48D 54D 60
Standard heights of 30, 36 and 42” (custom heights available)
DSS- Stainless Baffle Base Option
DSS 36DSS 42DSS 48DSS 54DSS 60
D- Decorative Panel Base
DDP1 36DDP1 42DDP1 48DDP1 54DDP1 60
Sorrento Hood Supports are available for this hood. See page 63 for details
D- Raised Arched Base
DRA 36DRA 42DRA 48DRA 54DRA 60
D- 6” Hardwood Base
DHW 36DHW 42DHW 48DHW 54DHW 60
24
DaltonD-Series
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
ElevationE Series Wall Mount Curved Hoods
EDP2 shown with molding package 2 (simple)
25
E SeriesStandard Widths 36, 42, 48, 54 and 60 or custom
Standard Heights 30, 36, 42, 48 or custom – Order height needed – do not cut down in field
Removable Top option (RT) ‐N/C option which is available‐Not available on 30” wide hoods‐requires ¾” of distance from top of hood to ceiling in order to lift hood over guide clips*On RT hoods there are important structural components which cannot be compromised. Any cutting or moving of any structural component will immediately void all warranties and may compromise the structural integrity of the hood.
Standard Assumptions Grain will be verticalField trimming is not recommended – order height which is needed
Depth of hood 22.25"
Depth of hood to tips of moldings Hardwood or Stainless base (22‐1/4)Classical , Simple & Basic (23‐3/8)
Distance moldings protrude past sides SS or Hardwood ‐ 0 Classical , Simple & Basic add 2‐1/4” to overall width
Ventilator Stanisci Stainless Mesh, Baffle or Value liner
Baffle liner Adjustment Hardwood increase base height by 2‐3/4, RA base increase base height by 1” DP1 increase base height by 2”
Available Moldings Hardwood (none), Classic, Simple or Basic
Available option
‐ RT‐ Removable top‐ Veneer delete on upper section if using plaster – center molding
will be shipped loose (Not suitable for painting)‐ Stainless Steel baffle base‐ Sorrento pull out spice racks
Available customization Yes – recommended if using aftermarket vent
E shown with molding package 1 Classical E with hardwood base
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
E- Standard Hood
E 36E 42E 48E 54E 60
EHW- Hardwood Base
EHW 36EHW 42EHW 48EHW 54EHW 60
E- Raised Panel Arched Base
ERA 36ERA 42ERA 48ERA 54ERA 60
E- Decorative Panel Base
EDP1 36EDP1 42EDP1 48EDP1 54EDP1 60
Sorrento Hood Supports are available for this hood. See Sorrento page for details
E- with Raised Panel Square Base
ERS 36ERS 42ERS 48ERS 54ERS 60
E- with Raised Panel Square Base with a Single Panel (Horizontal Grain on Base)
ERSS 36ERSS 42ERSS 48ERSS 54ERSS 60
Must Specify height, should not be cut down in the fieldCall for custom widths / heights
E- Applied Grape Base Carving
EEB 36EEB 42EEB 48EEB 54EEB 60
ESS- Stainless Base with Baffle liner
ESS 36ESS 42ESS 48ESS 54ESS 60
26
Elevation E Series
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
GeorgetownG-Series Wall Mount Hood
Standard Base G Hood
Classical Molding Package
1
top crown molding is not included* Applied molding –access panel
option shown on a standard base G.Order ARP option
for decorative removable option
27
G SeriesStandard Widths 36, 42, 48, 54 and 60 or custom
Standard Heights Standard base– 30”All other bases – 32”Custom heights available
Removable Top option (RT) ‐N/C option which is available – does not change appearance‐Not available on 30” wide hoods‐requires ¾” of distance from top of hood to ceiling in order to lift hood over guide clips*On RT hoods there are important structural components which cannot be compromised. Any cutting or moving of any structural component will immediately void all warranties and may compromise the structural integrity of the hood.
Applied removable Panel (ARP)Applied molding removable access panel allows access and decorative accent
Standard Assumptions Grain will be vertical unless specified otherwiseChimney can be trimmed in field
Depth of hood 22.25"
Depth of hood to tips of moldings Hardwood or Stainless base (22‐1/4)Classical , Simple & Basic (23‐3/8)
Distance moldings protrude past sides SS or Hardwood ‐ 0 Classical , Simple & Basic add 2‐1/4” to overall width
Ventilator Stanisci Stainless Mesh, Baffle or Value liner
Baffle liner Adjustment Standard Base – Increase by 1”Hardwood increase base height by 2‐3/4, Dp2 or RA base – increase base height by 1” DP1 increase base height by 2”
Available Moldings Hardwood (none), Classic, Simple or Basic
Available options ‐ Stainless Steel baffle base‐ RT‐ Removable top‐ ARP‐ Applied molding removable panel front‐ Sorrento pull out spice racks
Available customization Yes – recommended if using aftermarket vent
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright 2019 Stanisci Design all rights reserved
5-13/16” –between classical molding5-3/4” –simple
molding
E
D
C
AWidth of Hood
BTips of mlds
CBase Ht
DHood Height
EChim Depth
FChim Width
*30” SB 32.25” 8” 30” 12” 9.5”*30” DB 32.25” 10” 32” 12” 9.5”*30” HW or SS
NA 6” 32” 12.75” 11”
36” SB 38.25” 8” 30” 12” 15.5”36” DB 38.25 10” 32” 12” 15.5”36” HW or SS NA 6” 32” 12.75” 17”42” SB 44.25” 8” 30” 12” 21.5”
42” DB 44.25” 10” 32” 12” 21.5”42” HW or SS NA 6” 32” 12.75” 23”48” SB 50.25” 8” 30” 12” 27.5”48” DB” 50.25” 10” 32” 12” 27.5”48” HW or SS NA 6” 32” 12.75” 29”54” SB 56.25” 8” 30” 12” 33.5”54” DB 56.25” 10” 32” 12” 33.554” HW or SS NA 6” 32” 12.75” 35”60” SB 62.25” 8” 30” 12” 39.5”60” DB 62.25” 10” 32” 12” 39.5”60” HW or SS NA 6” 32” 12.75” 41”
*- Will accommodate a 6”round or smallerSB= Standard BaseDB (Decorative Base) = RA, DP1, DP2, RS, RSSSS= Stainless base with baffle liner includedHW- Hardwood base
28
GeorgetownG-Series
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
G- Raised Panel Arched Base*Access panel option is available
GRA 36GRA 42GRA 48GRA 54GRA 60
G- Standard Hood*Access panel option is available
G 36G 42G 48G 54G 60
G- Decorative Arched Base*Access panel option is available
GDP1 36GDP1 42GDP1 48GDP1 54GDP1 60
G- Applied Grape Base and Chimney Carving w/ Beaded Top*Access panel option is available
GBTEBT 36GBTEBT 42GBTEBT 48GBTEBT 54GBTEBT 60
G- Raised Panel Arched Basew/ Beaded Top
*Access panel option is available
GRABT 36GRABT 42GRABT 48GRABT 54GRABT 60
G- Hardwood base*Access panel option is available
G HW 30G HW 36G HW 42G HW 48G HW 54G HW 60
G- Stainless base with baffle liner*Access panel option is available
G SS 30G SS 36G SS 42 G SS 48G SS 54G SS 60
G- Raised Panel Square Base
GRS 36GRS 42GRS 48GRS 54GRS 60
G- Raised Panel Square Base with Single Panel (Base Grain is Horizontal)
GRSS 36GRSS 42GRSS 48GRSS 54GRSS 60
29
GeorgetownG-Series
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
G- Standard Base w/ Removable RaisedPanel Top
GRT 36GRT 42GRT 48GRT 54GRT 60
G- Applied Grape Base Carvingwith Removable Raised Panel Top
GRTEB 36GRTEB 42GRTEB 48GRTEB 54GRTEB 60
G- Raised Panel Arched Base w/ Removable Raised Panel Top
GRART 36GRART 42GRART 48GRART 54GRART 60
G- Decorative Arched base w/ Beaded Top*Access panel option is available
GDP1BT 36GDP1BT 42GDP1BT 48GDP1BT 54GDP1BT 60
Sorrento Hood Supports are available for this hood. See Sorrento section for details
G- Applied Grape Base Carving*Access panel option is available
GEB 36GEB 42GEB 48GEB 54GEB 60
G- Applied Grape Base and Chimney Carving*Access panel option is available
GEBT 36GEBT 42GEBT 48GEBT 54GEBT 60
G- Standard Base w/ Beaded Top*Access panel option is available
GBT 36GBT 42GBT 48GBT 54GBT 60
G- Applied Grape Base Carvingw/ Beaded Top*Access panel option is available
GBTEB 36GBTEB 42GBTEB 48GBTEB 54GBTEB 60
30
GeorgetownG-Series
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
Hartford
H Series Wall Mount Range Hood
H-Series with arched valance, traditional corbels and molding package 1
Crown molding not includedH-Series with standard valance,
base cabinets and corbels
8-1/8” deep shelf - overall
9”
12”
10-1/2” 13-1/2”
Corbels are an option
8-1/8” between moldings
Wainscot panel removes for easy install
2” fixed top rail to mount crown
31
H SeriesStandard Widths 54, 60, 66 or custom
Standard Heights 44, 50, 56 ‐ To determine height take ceiling height minus 66” and plus 13.5”. This will leave hood 30” above range .
Removable panelStandard on hood unless request otherwise
Standard Assumptions ‐Will have a removable panel with a 4” top rail with 2” being fixed‐54” and 60” will have two panels while wider hoods will be 3 panels‐Minimum width would be range plus 18” for legs unless building code requires more width‐9” wide columns
Depth of hood 22.25"
Depth of hood to tips of moldings Classical , Simple & Basic (23‐3/8)
Distance moldings protrude past sides 0
Ventilator Stanisci Stainless Mesh, Baffle or Value liner
Baffle liner Adjustment Dp2 or RA base – increase base height by 1” DP1 increase base height by 2”
Available Moldings Classic, Simple or Basic
Available option ‐Corbels – should be around 5 x 5 x 10
Available customization Yes – recommended if using aftermarket vent
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
H- Arched Valance
HRA 5444*HRA 6044*HRA 6644
HRA 5450*HRA 6050*HRA 6650
HRA 5456*HRA 6056*HRA 6656
H- Standard Valance
H 5444*H 6044*H 6644
H 5450*H 6050*H 6650
H 5456*H 6056*H 6656
*Top center panel is two panels rather than three, due to width of hood
H-Series hood are designed to accept the following corbel sizes
COR-AC2, COR-TT2, CBL-PRW3, CBL-ART3, CBL-PPC3, CBL-ARF3
Standard heights of 44, 50 and 56” (custom heights available)
H- Decorative Panel Base
HDP1 5444*HDP1 6044*HDP1 6644
HDP1 5450*HDP1 6050*HDP1 6650
HDP1 5456*HDP1 6056*HDP1 6656
32
Hartford
H Series
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
Huntington
H2 – Series Wall Mount Range Hood
H2-Series with arched valance, sorrento hood supports & baseplates (see page 12), provincial corbels with simple
molding package 2Crown molding not included
18-3/4” pillar
8-1/8” deep shelf - overall
Wainscot panel removes for easy vent install
2” fixed top rail to mount crown
6”2”
33
H2 SeriesStandard Widths 42, 48, 54, 60, 66, 72 or custom
Standard Heights 32, 38, 44‐ To determine height take ceiling height minus 66”plus 2”. Will put hood 30” above range
Standard Assumptions ‐Will have a removable panel with a 4” top rail with 2” being fixed‐42‐54 ” will have two panels while wider ones will be 3 panels‐Minimum width would be range plus 12” for legs unless building code requires more width‐Legs are 6” wide . Legs will always have a FLAT panel regardless of panel style chosen for rest of the hood
Depth of hood 22.25"
Depth of hood to tips of moldings Classical , Simple & Basic (23‐3/8)
Distance moldings protrude past sides 0
Ventilator Stanisci Stainless Mesh, Baffle or Value liner
Baffle liner Adjustment Dp2 or RA base – increase base height by 1” DP1 increase base height by 2”
Available Moldings Classic, Simple or Basic
Available option ‐Sorrento Leg supports with pull out spice racks
Available customization Yes – recommended if using aftermarket vent
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
H- Arched Valance
H2RA 4232*H2RA 4238*H2RA 4244*
H2RA 4832*H2RA 4838*H2RA 4844*
H2RA 5432*H2RA 5438*H2RA 5444*
H2RA 6032H2RA 6038H2RA 6044
H2RA 6632H2RA 6638H2RA 6644
H- Standard Valance
H2 4232*H2 4238*H2 4244*
H2 4832*H2 4838*H2 4844*
H2 5432*H2 5438*H2 5444*
H2 6032H2 6038H2 6044
H2 6632H2 6638H2 6644
*Top center panel is two panels rather than three, due to width of hood H2-Series hood are designed to accept the 6”
Sorrento Hood Supports
Standard heights of 26, 32, 38 and 44” (custom heights available)
H- Decorative Panel Base
H2DP1 4232*H2DP1 4238*H2DP1 4244*
H2DP1 4832*H2DP1 4838*H2DP1 4844*
H2DP1 5432*H2DP1 5438*H2DP1 5444*
H2DP1 6032H2DP1 6038H2DP1 6044
H2DP1 6632H2DP1 6638H2DP1 6644
See Sorrento section for additional Sorrento Hood
Supports
H2 7232H2 7238H2 7244
H2RA 7232H2RA 7238H2RA 7244
H2DP1 7232H2DP1 7238H2DP1 7244
34
Huntington
H2 – Series
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
I-SeriesISLAND Range Hoods
Standard I series and molding package 1
Applied molding on two sides – One side is removable
Order ARP option
One side removes for easy access(see price sheet for details)
35
I Series‐ ISLANDStandard Widths 36, 42, 48, 54 and 60 or custom
Standard Heights Height – specified by customer (cannot be trimmedspecify exact height)
Standard Assumptions ‐Grain will be vertical unless specified otherwise‐ Order 6” wider than cooking surface for best capture area
Depth of hood 24‐1/8
Depth of hood to tips of moldings Classical , Simple & Basic (26‐3/8)
Distance moldings protrude past sides Classical , Simple & Basic add 2‐1/4” to overall width
Width of Chimney 10” less than box of hood (36” wide hood has a 26” wide chimney)
Depth of Chimney 14” deep
Ventilator Stanisci Stainless ISLAND Mesh, or ISLAND Baffle
Baffle liner Adjustment Dp2 or RA base – increase base height by 1” DP1 increase base height by 2”
Available Moldings Classic, Simple or Basic
Available option ‐ Applied molding removable panel front
Available customization Yes – recommended if using aftermarket vent
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
I- Applied Grape Base Carving (two sides) w/ Beaded Top *Access panel option is available
IBTEB 36IBTEB 42IBTEB 48IBTEB 54IBTEB 60
I- Applied Grape Base and ChimneyCarving (two sides)
*Access panel option is available
IEBT 36IEBT 42IEBT 48IEBT 54IEBT 60
I- Decorative Arched Base (two sides)*Access panel option is available
IDP1 36IDP1 42IDP1 48IDP1 54IDP1 60
I- Standard Hood*Access panel option is available
I 36I 42I 48I 54I 60
I- Applied Grape Base Carving (two sides)*Access panel option is available
IEB 36IEB 42IEB 48IEB 54IEB 60
I- Arched Base (two sides)*Access panel option is available
IRA 36IRA 42IRA 48IRA 54IRA 60
I- Standard Hood w/ Beaded Top*Access panel option is available
IBT 36IBT 42IBT 48IBT 54IBT 60
I- Applied Grape Base and ChimneyMolding (two sides) w/ Beaded Top*Access panel option is available
IBTEBT 36IBTEBT 42IBTEBT 48IBTEBT 54IBTEBT 60
I- Decorative Arched Base (two sides)w/ Beaded Top
*Access panel option is available
IDP1BT 36IDP1BT 42IDP1BT 48IDP1BT 54IDP1BT 60
36
I-SeriesISLAND Range Hoods
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
Standard base andmolding package 1
ARP- Decorative Applied molding removable panel option
37
J SeriesStandard Widths 33, 36, 39, 42, 45, 48, 51, 54, 57, 60, 63 or custom
Standard Heights 30, 36, 42, 48 or custom
Removable Front Option – RF N/C optionChanges box depth to 14”‐ overall depth the same. There is a 5/16” reveal in front of box*On RF hoods there are important structural components which cannot be compromised. Any cutting or moving of any structural component will immediately void all warranties and may compromise the structural integrity of the hood.
Removable Panel ‐ ARP Decorative Applied molding removable panel is available as option
Standard assumptions Grain will be verticalSeam on front of cabinet between hardwood and plywood is highlighted with a V bead
Depth of rear box Box will be a standard 12” deep can request 13” at n/c – overall depth will remain the same ‐ 14” if ordered with removable front
Depth of hood 22.25"
Depth of hood to tips of moldings 23‐3/8"
Distance moldings protrude past sides 0
Height All line drawings reflect a 30” tall hood, when ordering taller hoods, the increase will occur in chimney and box section (pyramid height will remain constant for different heights
Ventilator Stanisci Stainless Mesh, Baffle or Value liner ‐ ‐ If odd number width subtract 3” for vent size, if even subtract 6” for vent width
Baffle liner Adjustment RA or DP2 base – increase by 1” DP1 increase by 2”
Available Moldings Classic, Simple or Basic
Available Options ‐RF‐ Removable front‐ARP‐ Decorative Applied Molding Removable panel‐Sorrento pull out spice racks
Available customization Yes – recommended if using aftermarket vent
Jacksonville
J – Series Wall Mount Range Hood
V-bead
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright 2019 Stanisci Design all rights reserved38
J – Removable Front Option
RF (Removable Front Option)- JRA example- Box is 14” deep rather than standard 12”- Chimney depth is 2” verses standard 3”- There is a reveal of 5/16 on front of box
Hood without Removable Face
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
J- Standard Hood*Access panel option is available,order ARP
J 33J 36J 39J 42J 45J 48J 51J 54J 57J 60J 63
J- Raised Panel Arched Base*Access panel option is available, order ARP
JRA 33JRA 36JRA 39JRA 42JRA 45JRA 48JRA 51JRA 54JRA 57JRA 60JRA 63
Standard heights of 30, 36 and 42” (custom heights available)
J- Decorative Panel Base*Access panel option is available, order ARP
JDP1 33JDP1 36JDP1 39JDP1 42JDP1 45JDP1 48JDP1 51JDP1 54JDP1 57JDP1 60JDP1 63
J- Beaded Top*Access panel option is available,order ARP
JBT 33JBT 36JBT 39JBT 42JBT 45JBT 48JBT 51JBT 54JBT 57JBT 60JBT 63
J- Applied Grape Base CarvingW/Beaded Top*Access panel option is available,order ARP
JBTEB 33JBTEB 36JBTEB 39JBTEB 42JBTEB 45JBTEB 48JBTEB 51JBTEB 54JBTEB 57JBTEB 60JBTEB 63
J- Applied Grape Base and Chimney Carvingw/Beaded Top*Access panel option is available, order ARP
JBTEBT 33JBTEBT 36JBTEBT 39JBTEBT 42JBTEBT 45JBTEBT 48JBTEBT 51JBTEBT 54JBTEBT 57JBTEBT 60JBTEBT 63
J- Raised Arched Basew/Beaded Top*Access panel option is available,order ARP
JRABT 33JRABT 36JRABT 39JRABT 42JRABT 45JRABT 48JRABT 51JRABT 54JRABT 57JRABT 60JRABT 63
J- with Raised Panel Square Base
JRS 33JRS 36JRS 39JRS 42JRS 45JRS 48JRS 51JRS 54JRS 57JRS 60JRS 63
J- with Raised Panel Square Base with Single Panel(Horizontal Grain on base)
JRSS 33JRSS 36JRSS 39JRSS 42JRSS 45JRSS 48JRSS 51JRSS 54JRSS 57JRSS 60JRSS 63
39
Jacksonville
J – Series
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
J- Decorative Panel base w/ Beaded Top*Access panel option is available,order ARP
JDP1BT 33JDP1BT 36JDP1BT 39JDP1BT 42JDP1BT 45JDP1BT 48JDP1BT 51JDP1BT 54JDP1BT 57JDP1BT 60JDP1BT 63
Standard heights of 30, 36 and 42” (custom heights available)
Sorrento Hood Supports are available for this hood. See Sorrento page for details
J- Applied Grape Base Carving*Access panel option is available,order ARP
JEB 33JEB 36JEB 39JEB 42JEB 45JEB 48JEB 51JEB 54JEB 57JEB 60JEB 63
J- Applied Base and Chimney Carving*Access panel option is available, order ARP
JEBT 33JEBT 36JEBT 39JEBT 42JEBT 45JEBT 48JEBT 51JEBT 54JEBT 57JEBT 60JEBT 63
40
Jacksonville
J – Series
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
L-Series with acanthus base and top carving,acanthus corbels and classic molding package 1
Top crown not included
Panel removes for easier installation,
beads hide the seam
12”
12”
6-1/8” between moldings
3-1/4” tall flat for crown to wrap
L-Series with Acanthus base carving,and corbels
Corbels are optional
41
L SeriesStandard Widths 54, 60, 66 or custom
Standard Heights 44, 50, 56 ‐ To determine height take ceiling height minus 66” and plus 14”. This will leave hood 30” above range .
Removable panel Standard, ‐ There will be bead board behind arch with seams in two beads to allow for access panel
Standard Assumptions ‐9” wide columns‐Recess in display niche is sized for 3” puck lights
Depth of hood 22.25"
Depth of hood to tips of moldings Classical or Simple (24‐1/2)
Distance moldings protrude past sides 0
Ventilator Stanisci Stainless Mesh, Baffle or Value liner
Baffle liner Adjustment N/A
Available Moldings Classic, or Simple
Available option ‐Corbels – should be around 5 x 5 x 10
Available customization Yes – recommended if using aftermarket vent
14”
Lexington
L – Series Wall Mount Range Hood
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
L-Applied Acanthus Base Carving
LAB 5444LAB 6044LAB 6644
LAB 5450LAB 6050LAB 6650
LAB 5456LAB 6056LAB 6656
L- Standard
L 5444L 6044L 6644
L 5450L 6050L 6650
L 5456L 6056L 6656
Corbels are priced separately
L-Series hood are designed to accept the following corbel sizes
COR-AC2, COR-TT2, CBL-PRW3, CBL-ART3, CBL-PPC3, CBL-ARF3
L-Applied Acanthus Base and Top Carving
LABT 5444LABT 6044LABT 6644
LABT 5450LABT 6050LABT 6650
LABT 5456LABT 6056LABT 6656
Standard heights of 44, 50 and 56” (custom heights available)
42
Lexington
L – Series
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
Panel above shelf now removesfor easy installation.Order Option MRP
2” top rail is fixed to
land crown
SUGGESTED N/C OPTION
43
M SeriesStandard Widths 30, 36, 42, 48, 54 and 60 or custom
Standard Heights 24, 30, 36, 42, 48 or custom
Removable panel If hood is getting a shelf you can request n/c removable panel option. This will oversize front door by 1/16 on each side and leave a seam behind shelf and one 2” down on 4” top rail.
Standard Assumptions ‐Standard shelf with all but MNY unless transitional is requested‐Corbels will be shipped attached unless otherwise requested‐Corbel size is around 5 x 5 x 10
Depth of hood 22.25"
Shelf Depth 6‐3/4” x 1 thick
Distance moldings protrude past sides 0
Ventilator Stanisci Stainless Mesh, Baffle or Value liner
Baffle liner Adjustment Does not apply
Available Shelfs Standard or transitional
Available option Can order hood and shelf only
Available customization Yes – recommended if using aftermarket vent
Madison
M – Series Wall Mount Range Hood
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
Standard heights of 24, 30, 36, 42 and 48” (custom heights available)
M with shelf and corbels specify style –next page
M- Four Panel Front w/o Shelf**
M 30
M 36
M 42
M 48
M 54
M 60
M- Two Panel Front w/o shelf**
MDP 30
MDP 36
MDP 42
MDP 48
MDP 54
MDP 60
**Removable panel option is not available on this style
Sorrento Hood Supports are available for this hood. See Sorrento page for details
Standard shelf has a routed profile detail
44
STANDARD SHELF Transitional shelf 1/8” radius shelf – comes with MNY-hoods or if requested on any other style
Madison
M – Series
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
M- w/ Shelf and Traditional Corbels
MTT 30MTT 36MTT 42MTT 48MTT 54MTT 60
MAC 30MAC 36MAC 42MAC 48MAC 54MAC 60
M- w/ Shelf and Provincial Corbels
MPSW 30MPSW 36MPSW 42MPSW 48MPSW 54MPSW 60
M- w/ Shelf and Arts and Crafts Corbels
MART 30MART 36MART 42MART 48MART 54MART 60
M- w/ Shelf and Acanthus Corbels
Standard heights of 24, 30, 36, 42 and 48” (custom heights available)
M- w/ Shelf and Plain Provincial Corbels
MPPC 30MPPC 36MPPC 42MPPC 48MPPC 54MPPC 60
45
MNY 30MNY 36MNY 42MNY 48MNY 54MNY 60
M- w/ Shelf and New York Transitional Corbel(transitional shelf – 1/8” radius on shelf
Madison
M – Series
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright 2019 Stanisci Design all rights reserved
This page left intentionally blank
46
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
N-Series with arched valance, acanthus corbels and molding package 1
Crown molding not included
N-Series with arched valance,and corbels
Corbels are an accessory
Wainscot panel removes for easy install
2” fixed top rail to mount crown
2”
47
N SeriesStandard Widths 54, 60, 66 or custom
Standard Heights 32, 38, 44‐ To determine height take ceiling height minus 66” and plus 2”. This will leave hood 30” above range .
Standard Assumptions ‐Will have a removable panel with a 4” top rail with 2” being fixed‐54” and 60” will have two panels while wider ones will be 3 panels‐Minimum width would be range plus 18” for legs unless building code requires more width‐9” wide columns‐Shelf will be 12” deep at widest
Depth of hood 22.25" for box and 18‐3/4” depth to columns
Depth of hood to tips of moldings Classical or Simple (23‐3/8)
Distance moldings protrude past sides 0
Ventilator Stanisci Stainless Mesh, Baffle or Value liner
Baffle liner AdjustmentDP1 increase by 1”
Available Moldings Classic, or Simple
Available option ‐Corbels – should be around 5 x 5 x 10
Available customization Yes – recommended if using aftermarket vent
Naples
N – Series Wall Mount Range Hood
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
N- Raised Arched
NRA 5432*NRA 6032*NRA 6632
NRA 5438*NRA 6038*NRA 6638
NRA 5444*NRA 6044*NRA 6644
*Top center panel is two panels rather than three, due to width of hood
N-Series hood are designed to accept the following corbel sizes:
COR-AC2, COR-TT2, CBL-PRW3, CBL-ART3, CBL-PPC3, CBL-ARF3
Standard heights of 30, 36, 42 (custom heights available)
N- Decorative Panel 1 Base
NDP1 5432*NDP1 6032*NDP1 6632
NDP1 5438*NDP1 6038*NDP1 6638
NDP1 5444*NDP1 6044*NDP1 6644
Sorrento Hood Supports are available for this hood. See page 63 for details
48
Naples
N – Series
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
O-Series Standard
30”
28”
Available with full height door for use without corbel
12-3/4”
Optional pull out Spice rack (2)
3-1/4” flat to
wrap crown
Panel removes for easier installation,
beads hide the seam
49
O SeriesStandard Widths 66, 72, 84, 90 or custom
Standard Heights ‐60, 72, 84 or Custom‐Bottom of mantel shelf will be 30” off range unless requested to be higher
Removable panel Standard – There is an access panel in the bead board to allow for easier ventilation installation.
Standard Assumptions ‐Minimum width would be range plus 18” for legs plus distance local code requires from combustible surface‐9” wide columns6‐1/8” between moldings on base3” niche to put puck lights if desired
Shelf Depth 10‐1/8” overall
Depth of hood 22‐1/4” of mantel shelf not including moldingDepth of legs 19‐1/2”
Depth of hood to tips of moldings Classical or Simple
Distance moldings protrude past sides 0
Ventilator Stanisci Stainless Mesh, Baffle or Value liner
Baffle liner Adjustment NONE
Available Moldings Classic or Simple
Available option ‐Corbels – should be around 5 x 5 x 10‐Pull out spice racks‐ Legs either set up for corbels or full size door
Available customization Yes – recommended if using aftermarket vent
Oxford
O – Series Wall Mount Range Hood
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
O- Applied Acanthus Base and Top Carving
OABT 6660OABT 7260OABT 8460OABT 9060
OABT 6672OABT 7272OABT 8472OABT 9072
OABT 6684OABT 7284OABT 8484OABT 9084
O- Standard
O 6660O 7260O 8460O 9060
O 6672O 7272O 8472O 9072
O 6684O 7284O 8484O 9084
Spice racks within
lower columns.Corbel and door
pull out toaccess spice
rack. Spice rack is maple with
three adjustable shelves and one
fixed shelf
Order Option: WSR
Corbels shown are an accessory (see corbel selection)
O-Series hood are designed to accept the following corbel sizes
COR-AC2, COR-TT2, CBL-PRW3, CBL-ART3, CBL-PPC3, CBL-ARF3
O- Applied Acanthus Base Carving
OAB 6660OAB 7260OAB 8460OAB 9060
OAB 6672OAB 7272OAB 8472OAB 9072
OAB 6684OAB 7284OAB 8484OAB 9084
Standard heights of 60, 72 and 84” (custom sizes available)
50
Oxford
O – Series
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright 2019 Stanisci Design all rights reserved
2” Top fixed rail to mount crown on
51
P SeriesStandard Widths 33, 36, 39, 42, 45, 48, 51, 54, 57, 60, 63 or custom
Standard Heights 30, 36, 42, 48 or custom
Removable Front Option – RF N/C optionChanges box depth to 16”‐ overall depth the same. There is a 5/16” reveal in front of rear box*On RF hoods there are important structural components which cannot be compromised. Any cutting or moving of any structural component will immediately void all warranties and may compromise the structural integrity of the hood.
Applied Molding Removable ‐ ARP
‐ ARP – Decorative Applied molding removable panel is available
Standard assumptions‐Grain will be vertical‐2” top fixed rail to mount crown on
Depth of rear box Box will be a standard 12” deep can request 13” at n/c – overall depth will remain the sameBox depth is 16” if ordered with Removable Front option (RF)
Depth of hood 22.25"
Depth of hood to tips of moldings 23‐7/16
Distance moldings protrude past sides 0
Ventilator Stanisci Stainless Mesh, Baffle or Value liner ‐ ‐ If odd number width subtract 3” for vent size, if even subtract 6” for vent width
Baffle liner Adjustment
Increase base by 2‐3/4 if getting baffle
Available Options ‐ (RF) Removable Front Option‐ (ARP) Decorative Applied Molding access panel‐ Battens‐ Sorrento pull out spice racks
Available customization Yes – recommended if using aftermarket vent
P with battens
Plymouth
P – Series Wall Mount Range Hood
ARP-Decorative Applied molding removal panel shown
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright 2019 Stanisci Design all rights reserved
Standard heights of 30, 36 and 42” (custom heights available)
P- Standard Hood P- Standard Hood with Baton option
*When hood is over 48” wide it will come with 3 batons
P- with Applied Molding removable panel option
52
Plymouth
P – Series Wall Mount Range Hood
RF (Removable Front Option)- P Example- Box is 16” deep rather than standard 12”- There is a reveal of 5/16 on front of box
RF option Front
removes
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
Q-Series Hood with Bracket Corbels and Full Length Shelf 36 x 30.
Crown molding not included
Panel above shelf now removesfor easy installation.Order Option MRP
1” 6-3/4” Deep
2” top rail is fixed to land
crown
1/8” radius on shelf edges
53
Q SeriesStandard Widths 30, 36, 42, 48, 54 and 60 or custom
Standard Heights 24, 30, 36, 42, 48 or custom
Removable panel Can request n/c removable panel option. This will oversize front door by 1/16 on each side and leave a seam behind shelf and one 2” down on 4” top rail.
Standard Assumptions ‐Corbels will be shipped attached unless otherwise requested‐Corbel size is around 5 x 5 x 10 Brackets are 1"wide x 6" deep x 8 1/2" tall
Depth of hood 22.25"
Shelf Depth 6‐3/4” x 1 thick
Distance moldings protrude past sides 0
Ventilator Stanisci Stainless Mesh, Baffle or Value liner
Baffle liner Adjustment Does not apply
Available option Sorrento Hood supports
Available customization Yes – recommended if using aftermarket vent
Quebec
Q – Series Wall Mount Range Hood
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
Q- w/ Simple Brackets
QBKT 30QBKT 36QBKT 42QBKT 48QBKT 54QBKT 60
Q- w/ Shelf and Traditional Corbels
QTT 30QTT 36QTT 42QTT 48QTT 54QTT 60
Q- w/ Shelf and Provincial Corbels
QPRS 30QPRS 36QPRS 42QPRS 48QPRS 54QPRS 60
Q- w/ Shelf and Arts and Crafts Corbels
QART 30QART 36QART 42QART 48QART 54QART 60
Q- w/ Shelf and Acanthus Corbels
QAC 30QAC 36QAC 42QAC 48QAC 54QAC 60
Standard heights of 24, 30, 36, 42 and 48” (custom sizes available)
Q- w/ Shelf and Plain Provincial Corbels
QPPC 30QPPC 36QPPC 42QPPC 48QPPC 54QPPC 60
Sorrento Hood Supports are available for this hood. See Sorrento page for details
54
Quebec
Q – Series
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
R-Series with Raised Panel Top –RRP is shown*
Crown molding is not included
Panel removes for easier installation
12-3/4’’ to top of shelf
2” fixed rail to mount crown
5” shelf depth
55
R SeriesStandard Widths 30, 36, 42, 48, 54 and 60 or custom
Standard Heights 24, 30, 36, 42, 48 or custom
Removable Panel Standard ‐n/c removable panel. This will oversize front door by 1/16 on each side and leave a seam behind shelf and one 2” down on 4” top rail.
Standard Assumptions ‐Brackets will be shipped attached unless otherwise requested‐30” and 36” hoods will have 2 panels not three
Depth of hood 22.25"
Shelf Depth 5”
Distance moldings protrude past sides 0
Ventilator Stanisci Stainless Mesh, Baffle or Value liner
Baffle liner Adjustment Does not apply
Available Shelfs Classic or Simple
Available option ‐Sorrento hood supports
Available customization Yes – recommended if using aftermarket vent
Rochester
R – Series Wall Mount Range Hood
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
RRP – R Raised Panel
RRP30*RRP36*RRP42RRP48RRP54RRP60
RFP – R Flat Panel
RFP30RFP36RFP42RFP48RFP54RFP60
Standard heights of 24, 30, 36 and 42” (custom heights available)
RFPA – R Flat Panel with Acanthus onlay
RFPA30RFPA36RFPA42RFPA48RFPA54RFPA60
*RRP30 and RRP36 will have a two panel top, all others will have three
Sorrento Hood Supports are available for this hood. See Sorrento page for details
56
Rochester
R – Series
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
S-Series with standard base, simple molding package 2 - shown - top
panel is an applied removable panel
57
S SeriesStandard Widths 33, 36, 39, 42, 45, 48, 51, 54, 57, 60, 63 or custom
Standard Heights 30, 36, 42, 48 or custom
Removable Option Standard ‐ Upper door is removable – secured by clips for ventilation installation access
Standard assumptions ‐‐top fixed frame is 1‐3/4”‐Upper door will have 3 panels unless requested otherwise
Depth of rear box Rear box will be 18” deep to panel or 17‐1/4” not including panel
Depth of hood 22.25"
Depth of hood to tips of moldings 23‐3/8"
Distance moldings protrude past sides 0
Base Height 10” base not including molding
Ventilator Stanisci Stainless Mesh, Baffle or Value liner ‐ ‐ If odd number width subtract 3” for vent size, if even subtract 6” for vent width
Baffle liner Adjustment RA or DP2 base – increase by 1” DP1 increase by 2”
Available Moldings Classic, Simple or Basic
Available Options ‐Sorrento pull out spice racks
Available customization Yes – recommended if using aftermarket vent
S-Series RA base and simple molding package 2 - shown - top
panel is an applied removable panel
Springfield
S – Series Wall Mount Range Hood
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
S- Standard HoodS 33S 36S 39S 42S 45S 48S 51S 54S 60S 57S 63
S- Applied Grape Base CarvingSEB 33SEB 36SEB 39SEB 42SEB 45SEB 48SEB 51SEB 54SEB 57SEB 60SEB 63
Standard heights of 24, 30, 36 and 42” (custom sizes available)
(Top panel is an applied panel)
S- Raised Panel Square BaseSRS 33SRS 36SRS 39SRS 42SRS 45SRS 48SRS 51SRS 54SRS 57SRS 60SRS 63
S- Decorative Panel Base 1SDP1 33SDP1 36SDP1 39SDP1 42SDP1 45SDP1 48SDP1 51SDP1 54SDP1 57SDP1 60SDP1 63
Sorrento Hood Supports are available for this hood.
S- with Raised Panel Square Base with Single Panel(Horizontal Grain on Base)SRSS 33SRSS 36SRSS 39SRSS 42SRSS 45SRSS 48SRSS 51SRSS 54SRSS 57SRSS 60SRSS 63
SDP2- Decorative Panel Base 2SDP2 33SDP2 36SDP2 39SDP2 42SDP2 45SDP2 48SDP2 51SDP2 54SDP2 57SDP2 60SDP2 63
S- Raised Panel BaseSRA 33SRA 36SRA 39SRA 42SRA 45SRA 48SRA 51SRA 54SRA 57SRA 60SRA 63
58
Springfield
S – Series
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
T-Series with optional arched baseand molding package 1
top crown molding is not included*
Optional ARP option - Removes for easy access
59
T SeriesStandard Widths 36, 42, 48, 54 and 60 or custom
Standard Heights 42” Custom heights available
Removable Top option (RT) ‐N/C option which is available – does not change appearance‐Not available on 30” wide hoods‐requires ¾” of distance from top of hood to ceiling in order to lift hood over guide clips*On RT hoods there are important structural components which cannot be compromised. Any cutting or moving of any structural component will immediately void all warranties and may compromise the structural integrity of the hood.
Applied removable Panel (ARP) Applied Molding removable panel option is available – see above
Standard Assumptions Grain will be vertical unless specified otherwise
Depth of hood 22.25"
Depth of hood to tips of moldings Hardwood or Stainless base (22‐1/4)Classical , Simple & Basic (23‐3/8)
Distance moldings protrude past sides SS or Hardwood ‐ 0 Classical , Simple & Basic add 2‐1/4” to overall width
Ventilator Stanisci Stainless Mesh, Baffle or Value liner
Baffle liner Adjustment Hardwood increase by 2‐3/4, Dp2, or RA base – increase by 1” DP1 increase by 2”
Available Moldings Hardwood (none), Classic, Simple or Basic
Available options ‐ Stainless Steel baffle base‐ RT‐ Removable top‐ ARP‐ Applied molding removable panel front‐ Sorrento pull out spice racks
Available customization Yes – recommended if using aftermarket vent
Thompson
T – Series Wall Mount Range Hood
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
22.25” for box or 23-3/8”
To the tips of the molding if applicable
7-13/16”–Between Classical Molding7-3/4” –Simple Molding
42”
D
C
AWidth of Hood
BTips of mlds
CBase HtBetween
molding
DChim Depth
EChim Width
*30” 32.25” 10” 12” 9.5”*30” HW or SS NA 6” 12.75” 11”36” 38.25 10” 12” 15.5”36” HW or SS NA 6” 12.75” 17”42” 44.25” 10” 12” 21.5”42” HW or SS NA 6” 12.75” 23”48” 50.25” 10” 12” 27.5”48” HW or SS NA 6” 12.75” 29”54” 56.25” 10” 12” 33.554” HW or SS NA 6” 12.75” 35”60” 62.25” 10” 12” 39.5”60” HW or SS NA 6” 12.75” 41”
*- Will accommodate a 6”round or smallerSS= Stainless base with baffle liner includedHW- Hardwood base
60
Thompson
T – Series
Available RT option
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
T- Raised Panel Arched Base*Access panel option is available
TRA 36TRA 42TRA 48TRA 54TRA 60
T- Standard Hood*Access panel option is available
T 36T 42T 48T 54T 60
T- Standard Base w/ Beaded Top*Access panel option is available
TBT 36TBT 42TBT 48TBT 54TBT 60
T- Decorative Arched Base*Access panel option is available
TDP1 36TDP1 42TDP1 48TDP1 54TDP1 60
T- Raised Panel Arched Basew/ Beaded Top
*Access panel option is available
TRABT 36TRABT 42TRABT 48TRABT 54TRABT 60
T- Raised Panel Square Base
TRS 36TRS 42TRS 48TRS 54TRS 60
T- Raised Panel Square Base with Single Panel(horizontal grain on base)
TRSS 36TRSS 42TRSS 48TRSS 54TRSS 60
T- Hardwood base*Access panel option is available
THW 30THW 36THW 42THW 48THW 54T HW 60
T- Stainless base with baffle liner*Access panel option is available
TSS 30TSS 36TSS 42TSS 48TSS 54TSS 60
61
Thompson
T – Series
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
T- Standard Base w/ Removable RaisedPanel Top
TRT 36TRT 42TRT 48TRT 54TRT 60
T- Applied Grape Base Carvingwith Removable Raised Panel Top
TRTEB 36TRTEB 42TRTEB 48TRTEB 54TRTEB 60
T- Raised Panel Arched Base w/ Removable Raised Panel Top
TRART 36TRART 42TRART 48TRART 54TRART 60
T- Decorative Arched base w/ Beaded Top*Access panel option is available
TDP1BT 36TDP1BT 42TDP1BT 48TDP1BT 54TDP1BT 60
Sorrento Hood Supports are available for this hood. See Sorrento page for details
T- Applied Grape Base Carvingw/ Beaded Top*Access panel option is available
TBTEB 36TBTEB 42TBTEB 48TBTEB 54TBTEB 60
T- Applied Grape Base and Chimney Carving w/ Beaded Top*Access panel option is available
TBTEBT 36TBTEBT 42TBTEBT 48TBTEBT 54TBTEBT 60
T- Applied Grape Base Carving*Access panel option is available
TEB 36TEB 42TEB 48TEB 54TEB 60
T- Applied Grape Base and Chimney Carving*Access panel option is available
TEBT 36TEBT 42TEBT 48TEBT 54TEBT 60
62
Thompson
T – Series
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
Panel removes for easier installation
Optional Sorrentocabinet support(2)
U-Series with standard valance, classical molding package 1 and optional sorrento hood
supports with traditional corbelsTop crown molding not included
63
U SeriesStandard Widths 66, 72, 84, 90 or custom
Standard Heights 32, 38, 44 ‐ To determine height take ceiling height minus 66” and plus 2”. This will leave hood 30” above range .
Removable panel Standard, there is an access panel standard – see pic above
Standard Assumptions ‐Minimum width would be range plus 18” for legs unless building code requires more width‐9” wide columns‐3‐1/8 Niche depth‐3” at top to mount crown on
Depth of hood 22.25" box depth less moldingsDepth of legs 19—1/2”
Depth of hood to tips of moldings Classical or Simple (24‐1/2 – to mantle shelf molding
Distance moldings protrude past sides 0
Ventilator Stanisci Stainless Mesh, Baffle or Value liner
Baffle liner Adjustment Does not apply
Available Moldings Classic or Simple
Available option ‐Corbels – should be around 5 x 5 x 10‐Sorrento Pull out spice racks
Available customization Yes – recommended if using aftermarket vent
Utah
U – Series Wall Mount Range Hood
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
U- Standard
U 6632U 6638U 6644
U 7232U 7238U 7244
U 8432U 8438U 8444
U 9032U 9038U 9044
Standard heights of 32, 38 and 44” (custom sizes available)
U-Series also available with Sorrento hood supports. See next page for more
information.
64
Utah
U – Series
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
Sorrento Cabinet Supports
Slab both sides – n/c
Panel both sides – not recommended if mounted against cabinets
Hybridslab on outside and panel on inside
1. Side Choice:
2. Base Plate:
28” tall – no base plate – n/c
28” tall plus 1” base plate
3. Front :
No front door, slab front – n/c Front door
8-7/8
12-7/8
Comes STANDARD with Spice Rack - n/c
28”
14-3/4
9”
65
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved66
Please note that the VALUE LINE hoods are located at the end of the hood section of the binder on glossy paper. These hoods are different
than our regular hoods in that
-No modifications are allowed
-Offered in limited sizes
-Offered in limited species
-Are excluded from any displaying dealer discounts
VALUE LINE HOODS
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
W-Series with standard baseand corbels
67
W SeriesStandard Widths 66, 72, 84, 90 or custom
Standard Heights ‐60, 72, 84 or Custom‐Bottom of center section will be 30” off range unless requested to be higher
Removable panel Standard – Wainscot panel removes – has a 2” top fixed rail to mount crown on
Standard Assumptions ‐Minimum width would be range plus 18” for legs plus distance local code requires from combustible surface‐9” wide columns‐2” top fixed rail for crown – 4” total
Shelf Depth 8‐1/8” overall
Depth of hood 22‐1/4 depth of mantle shelf without moldiingDepth of legs 18‐3/4
Depth of hood to tips of moldings Classical or Simple
Distance moldings protrude past sides 0
Ventilator Stanisci Stainless Mesh, Baffle or Value liner
Baffle liner Adjustment RA, DP2 – Add 1”DP1 – Add 2”
Available Moldings Classic, or Simple
Available option ‐Corbels – should be around 5 x 5 x 10‐Pull out spice racks‐ Legs either set up for corbels or full size door
Available customization Yes – recommended if using aftermarket vent
W-Series with arched valance, and corbels
30”
12-3/4”
Optional pull out Spice rack (2)
Wainscot panel removes for easy
install
Washington
W – Series Wall Mount Range Hood
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
W- Arched Valance
WRA 6660WRA 7260WRA 8460WRA 9060
WRA 6672WRA 7272WRA 8472WRA 9072
WRA 6684WRA 7284WRA 8484WRA 9084
W- Solid Valance
W 6660W 7260W 8460W 9060
W 6672W 7272W 8472W 9072
W 6684W 7284W 8484W 9084
Spice racks withinlower cabinet.
Corbel and door pull out toaccess spice rack. Spice rack is maple with three adjustable shelves and one
fixed shelf
Order Option: WSR
Corbels shown are an accessory (see corbel selection)
W-Series hood are designed to accept the following corbel sizes:
COR-AC2, COR-TT2, CBL-PRW3, CBL-ART3, CBL-PPC3, CBL-ARF3
W- Decorative Base Panel
WDP1 6660WDP1 7260WDP1 8460WDP1 9060
WDP1 6672WDP1 7272WDP1 8472WDP1 9072
WDP1 6684WDP1 7284WDP1 8484WDP1 9084
68
Washington
W – Series
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
XRA-Series with provincial corbels with classical molding package 1 shown in Rustic alder
*corbels must be ordered separatelycrown molding not included
69
X SeriesStandard Widths 30, 36, 42, 48, 54 and 60 or custom
Standard Heights 24, 30, 36, 42, 48 or custom
Removable panel Not available on this model
Standard Assumptions ‐The legs are applied legs so they do not take up additional space (example a 42” hood will get the 42” liner)‐Corbels will be shipped attached unless otherwise requested‐Column Width is 8‐3/4”‐Corbel size is around 5 x 5 x 10
Depth of hood including leg 24‐3/8” from back to front of leg
Shelf Depth 9‐1/2” deep
Distance moldings protrude past sides 0
Molding Options Classic or Simple
Ventilator Stanisci Stainless Mesh, Baffle or Value liner
Baffle liner Adjustment Does not apply
Available option ‐Corbels can be provided by Stanisci
Available customization Yes – recommended if using aftermarket vent
X-Cross
X – Series Wall Mount Range Hood
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
X- Standard Valance
XRA 3624XRA 3630XRA 3636XRA 3642
XRA 4224XRA 4230XRA 4236XRA 4242
XRA 4824XRA 4830XRA 4836XRA 4842
XRA 5424XRA 5430XRA 5436XRA 5442
XRA 6024XRA 6030XRA 6036XRA 6042
Standard heights of 24, 30, 36 and 42” (custom heights available)
70
X-Cross
X – Series
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved71
Z200 SeriesStandard Widths 33, 36, 39, 42, 45, 48, 51, 54, 57, 60, 63 or custom
Standard Heights 30, 36, 42, 48 or custom
Removable Front Option – RF N/C optionChanges box depth to 16”‐ overall depth the same. There is a 5/16” reveal in front of rear box*On RT hoods there are important structural components which cannot be compromised. Any cutting or moving of any structural component will immediately void all warranties and may compromise the structural integrity of the hood.
Standard assumptions 2” top rail on top of hood Radius of slope will change as hood increases in height
Depth of rear box 12" or 13" at request (n/c)
Depth of hood 22.25"
Depth of hood to tips of moldings 23‐3/8"
Ventilator Stanisci Stainless Mesh or Value liner ‐ If odd number width subtract 3” for vent size, if even subtract 6” for vent width
Baffle liner Adjustment Increase base height to 8.75
Available Options ‐ (RF) Removable Front Option‐ Sorrento pull out spice racks
Available customization Yes – recommended if using aftermarket vent
Zenith
Z200 – Series Wall Mount Range Hood
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright 2019 Stanisci Design all rights reserved
Z200 Standard Hood(Standard widths- custom width and heights available)
Z200- 33Z200- 36Z200- 39Z200- 42Z200- 45Z200- 48Z200- 51Z200- 54Z200- 57Z200- 60Z200 -63
72
Zenith
Z200 – Series
RF (Removable Front Option)- Z200 Example- Full front of hood (including face frame ) removes for easier
installation- Box is 16” deep rather than standard 12”- There is a reveal of 5/16 on front of box
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
Standard Base Z300The height of the hood will increase the height of the
chimney. The height which is shown is 42”
22.25”
12”
6”
73
Z300 SeriesStandard Widths 30, 36, 42, 48, 54 and 60 or custom
Standard Heights Standard – 22”‐42”Plus‐over 42 ‐54”
Removable option Not available
Standard Assumptions Grain will be vertical unless specified otherwiseIf ordering a 1000 CFM, 1200 CFM or a remote vent – Must also order a offset transition piece item number (offset‐10)30” wide will NOT accommodate a value liner with 390 CFM blower
Base height 6”
Depth of hood 22.25"
Width of chimney Hood width minus 20‐1/2”
Distance moldings protrude past sides SS or Hardwood ‐ 0
Ventilator Stanisci Stainless Mesh, Baffle or Value liner
Baffle liner Adjustment Hardwood increase by 2‐3/4,
Available Moldings Does not apply
Available option ‐ Stainless Steel baffle base
Available customization Yes – recommended if using aftermarket vent
Zombroan
Z300 – Series Wall Mount Range Hood
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright 2019 Stanisci Design all rights reserved
Stainless base option with baffle liner
AVAILABLE HEIGHTS
74
Zombroan
Z300 – Series
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
Sorrento Hood Support
Cabinet Accessory
Sorrento hood supports are a totally new product. Specifically designed to be placed under wood range hoods they offer a distinctive visual statement and additional storage.
Different widths and styles are available with standard built in spice racks.
Showroom by Builder Preferred Cabinetry, Inc.- KS
75
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
Sorrento Hood Supports
Slab sidesDoor Panel sides
Hybrid slab one side door panel the other, sold in mirror pairs
Spice Rack is standard
Most hoods look good with a 6” hood support, these designs include
G, T, E, D, B, M, Q, H2
Other hoods can accommodate the wider 9” hood supports and look proportional. These hood designs include the H, N and U.
Custom hoods can also include hood supports.
There are three options to be selected when specifying a hood support
1.) Side type:
A.) Solid flat slab on both sides
B.) Door panels on both sides.
C.) Hybrid slab on one side door panel on the other we call this a hybriddesign, they are sold in mirror pairs.
2.) Door Front: 9” wide Hood Supports can accommodate either a door on the face or a slab panel, 6” must have a slab panel or a door with a flat center panel.
3.) Bottom Plate: All supports with or without bottom plate will be 28” or 30” tall
Please note that fillers with be added to the hood for the supports to sit under and the liner specified will be reduced by the width of the supports. The hood must be wider then the cooking surface under it and many building codes require spacing between the cooking surface and flammable objects. Please follow local codes.
Slab flat panel Door
panelBottom Plate
76
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
Sorrento Cabinet Supports
Slab both sides – n/c
Panel both sides – not recommended if mounted against cabinets
HybridSlab on outside and panel on inside
Comes STANDARD with Spice Rack - n/c
5-7/8
14-3/4
28”
6” or 9”12-7/8
1. Side Choice:
2. Base Plate:
28” tall – no base plate – n/c 28” + 1” for base plate
3. Front :
No front door, slab front – n/cFront door, must be flat panel
77
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
This page left blank on purpose
78
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright Stanisci Design 2019 all rights reserved
Custom Hoods
Made to Order
Stanisci Design will make modifications to our hoods or build your custom designs. We will engineer your design to fit our ventilation units and provide a complete functioning custom wood range hood canopy. Please contact us for more information. A quick or detailed drawing or a photo from houzz will help us understand the look you are going for.
Visit us on houzz and facebook to see many more….
79
**Please check your local building code before placing an order. Range Hoods and Liner ventilators are subject to local building codes. It is your responsibility to ensure Stanisci Design Wood Range Hoods and liner/ventilators meet your local building code and/or the appliance manufacturers
specifications.700 South Glaspie Street • Oxford, MI 48371 • (248) 572-6880 • email: [email protected] • www.wood-hood.com
Copyright© Stanisci Design All Rights Reserved 20172019 Copyright 2019 Stanisci Design all rights reserved
Custom Quoting Procedure:
1. Communicate what the hood or valance you are looking for looks like. This does not need to be to scale or have all the detail. We have found pictures or drawings are usually the easiest and quickest method to communicate the essence of the design you are looking for. Common things sent to us are.
a) Pictures
b) Hand drawn rough sketches
c) Catalog pages of current designs with the modifications identified.
2. Identify the wood species, width and height of the hood or valance.
3. Fax to us at 248-572-6884 or email at [email protected]
4. Stanisci Design will provide you a quote for your project. 98% of all custom quotes are completed within one business day. During this part of the quoting process, Stanisci Design will make recommendations on any changes which would reduce cost or otherwise improve the project. If you are having us modify a hood with a competitors ventilation, unless otherwise requested, we will also provide a quote with a comparable ventilation from Stanisci Design. This will allow you to compare units.
5. At time of order, Stanisci Design will provide a CAD drawing if necessary which will ensure we have adequately captured all your requirements.
80