Download - Q1 clinical 2016 with cpd
IPS
e.m
ax® N
EWS
INTERNATIONAL EXPERT SYM
POSIU
M M
AD
RIDVA
RIO
LINK
® ESTH
ETIC
innovationQuarter 1 // 1st January - 31st March 2016 CLINICaL
I V O C L A R V I V A D E N T
PROGRAMAT® CS3 C
ER
EC S
PEC
IAL
EDIT
ION
IPS e.max ®
CAD
4 FACTS AB
OU
T
Variolink® Esthetic
#1Variolink® Esthetic is available as both a light and dual curing luting composite for permanent restorations
#2Variolink® Esthetic has a true to life ‘try-in’ pastes, the shade you see is
the shade you will cement with
#4Even if exposed to intensive light or a humid environment, Variolink® Esthetic is not subject to visible shade changes because of the patented Ivocerin® initiator
#3 The smart combination of the light initiator Ivocerin® and a light sensitivity filter allows you to easily remove excess material after pre-polymerisation
Variolink® EstheticThe aesthetic luting composite. Amazingly simple aesthetics.
Variolink® Esthetic is based on the aesthetic luting composites
Variolink® II and Variolink® Veneer, which have proven their
worth in clinical use for many years.
Variolink® Esthetic demonstrates exceptional shade stability.
This is made possible by the patented, reactive light initiator
Ivocerin®, which is 100 % free of amine-based co-initiators.
Variolink® Esthetic forms the basis for long-lasting and reliable
aesthetic results. Even if exposed to intensive light or a humid
environment, Variolink® Esthetic is not subject to visible shade
changes.
Variolink® Esthetic is available in these shades:
Speak to your local Ivoclar
Vivadent Product Specialist
to find out more about
Variolink® Esthetic
our Product of the
Quarter.
PRODUCT OF THE QUARTER
BUY 3GET 1FREE
*
Find out about: our latest aesthetic luting composite - Variolink® EstheticAdhesive luting composites has contributed to the rising importance of innovative restorative materials which
allow for a defect-oriented preparation. Their adhesive bond makes it possible that highly aesthetic all-ceramics
can be used even if no retentive preparation has been performed. An additional advantage of adhesive luting
composites over conventional cements represents the enhanced long-term integrity of the restoration margin.
“An IPS e.max® CAD restoration was decided in order to achieve an efficient and aesthetic result.”
EDITORIAL
The advantage of conventional cements (e.g. phosphate
or glass ionomer cements) lies in the easy and time-saving
removal of excess material, which adheres mechanically to
the tooth structure and is easily discernible due to its opaque
shade. However, for conventional cements to establish a
mechanical bond, retentive preparation is required.
The advent of adhesive luting composites has contributed
to the rising importance of innovative restorative materials
which allow for a defect-oriented preparation. Their adhesive
bond makes it possible for highly aesthetic all-ceramics – such
as IPS e.max® Press/CAD – to be used even if no retentive
preparation has been performed. It is essential in such cases,
however, that a luting material of an appropriate shade and
translucency level is selected in order to obtain excellent
aesthetic results. This applies in particular to restorations with
a low material thickness.
An additional advantage of adhesive luting composites over
conventional cements represents the enhanced long-term
integrity of the restoration margin. The low solubility and
high resistance to wear of these luting composites lead to a
reduced washing out of the cement gap.
Optimum aesthetics for a broad range of indications
A 25-year-old patient presented to our practice with an
insufficient composite filling and secondary caries on the
lower left 6.
Since the defective area was very large, treatment with an
IPS e.max® CAD restoration was decided in order to achieve
an efficient and aesthetic result. After placement of the core
build-up and preparation of the tooth, the tooth was scanned
intraorally and a partial crown was designed (Fig. 1).
Subsequently, the non-crystallised restoration was ground
and tried in to check the contact points and the fit. In order
to assess the aesthetic appearance and the shade effect, the
characterised and fired restoration was again tried in using
Variolink® Esthetic Try-In Paste Neutral. During these trial
placements, care was taken that the tooth was sufficiently
moist to ensure a lifelike shade impression.
An anatomically shaped rubber dam (OptraDam Plus) was
used for absolute isolation during the final placement of the
restoration. First, the enamel was etched for 15 seconds,
followed by the entire cavity for another 15 seconds.
Then, Adhese® Universal was applied onto the prepared tooth
surface and dispersed with a stream of air (Fig. 2). Special
care was taken that no material pools formed at the cavity
floor. Subsequently, the restoration was light-cured with a
polymerisation light (Bluephase® Style) for 10 seconds.
To obtain an optimum bond, the IPS e.max® CAD restoration
was etched with hydrofluoric acid (IPS Ceramic Etch Gel) for
20 seconds and conditioned with Monobond® Plus.
1.
Ivoclar Vivadent’s IPS e.max® system is streets ahead
NEWS
ITV’s Coronation Street actress Alison King definitely had something to smile about at the TV Choice Awards
in 2015. The actress not only walked away with the Best Soap Actress award for playing Weatherfield’s Carla
Connor, but also had a gleaming IPS e.max® smile to match her dazzling outfit.
Blaming her thumb-sucking habit as
a child for needing six teeth crowned
ten years ago at a London Dental
Practice, former Dental Nurse Alison
wasn’t left with the smile she deserved:
“As an actress onscreen I’d began to
notice how my top and bottom front
teeth had been pushed into the middle
where my thumb had been! The inside
bottom four teeth around the gum line
were much shorter than the rest of the
teeth...
“I wanted a smile that didn’t look out
of character, and together John and
Jonathan really did make happen what
other dentist’s had said was impossible.
I’m truly indebted to them forever and
smiling happily!”
John Hewitt, City Centre Dental Practice & Jonathan Asquith, Dentechnica Limited
In a next step, Variolink® Esthetic DC was applied on the
restoration which was subsequently positioned on the tooth.
After pre-polymerisation of the excess material using the
quarter technique (two seconds per quarter surface) (Fig. 3),
the gel-like excess material could be easily removed using
a scaler (Fig. 4). Glycerine gel (Liquid Strip) was applied to
prevent the formation of an inhibition layer.
In a final step, each segment of the restoration was light-
cured for 10 seconds, the composite gap was finished and
polished (Astropol) and the occlusion was checked. The
patient returned 1 week later to confirm the successful
placement of the restoration (Fig 5.)
Dr. Stephanie Huth
Research Associate
Ivoclar Vivadent AG
Schaan, Liechtenstein
EDITORIAL CONTINUED
2. 3.
4.
5.
READ MORE at
www.ivoclarvivadent.co.uk
Scan here to complete the questionnaire regarding this article to receive 1 hour CPD.Visit www.ivoclarvivadent.co.uk/free-cpd for more details
Variolink® EstheticVariolink® Esthetic is an aesthetic
light- and dual-curing luting composite for the permanent cementation of ceramic and
composite restorations.
FOCUS PRODUCTS
IPS Empress® Direct Adhese® Universal
OptraDam® Plus
Tetric EvoCeram® Bulk Fill
Multilink® Automix OptraGate®
Tetric EvoFlow®
Tetric EvoFlow® is the top-selling flowable radiopaque composite in Europe, it is flowable when desired and stable as required.
Tetric EvoCeram® Bulk Fill offers excellent handling and allows
large increments of up to 4mm to be polymerised in just 10
seconds with a lifelike dentin appearance.
Tetric EvoCeram®
Tetric EvoCeram® is the universal composite for anterior and
posterior restorations that delivers outstanding aesthetics.
IPS Empress® Direct is a light-curing, highly aesthetic nano-
hybrid composite filling material for direct restorative procedures
in the anterior and posterior region.
Adhese® Universal is a single-component, light-cured adhesive for direct and indirect bonding procedures that is compatible with all etching techniques.
Multilink® Automix is an adhesive luting system for the cementation of indirect restorations made of
silicate and oxide ceramics, metal and metal-ceramics & composites.
Due to its anatomical shape and flexible, three-dimensional
design, OptraDam® is completely different from conventional
rubber dams.
Cervitec®
Chlorhexidine containing Cervtiec® products offer
individualised solutions, in terms of the active ingredient
concentration, delivery form and application method.
OptraGate® is latex free device that retracts the lips & cheeks
evenly and gently, allowing more effective, relative isolation of the
treatment field.
Tetric EvoFlow®
Bulk FillTetric EvoFlow® Bulk Fill can be cured in increments of up to
4mm, excellent affinity to cavity walls and self-levelling consistency
are additional benefits.
Tetric® ClassicTetric® is a classic among the
universal composites. An outstanding radiopacity
of 400% Al
Monobond® Etch & Prime
The first single-component ceramic primer in the world, which allows you to etch and
silanate glass-ceramic surfaces in one easy step & improves bond
strength.
New User Offers Available
BUY 3GET 1FREE
*
Fluor Protector SThe protective fluoride varnish
that is colophony & latex free which provides superior
protection against dental caries and erosion.
ExciTE® FExciTE® F is a light-curing, fluoride releasing, single-
component total-etch adhesive for the placement of direct
restorations.
This offer is only available on the products shown above. Mix and match between products is
not applicable. (i.e. buy 3x OptraGate packs to get an OptraGate pack free)
Blocks include, IPS e.max, Telio CAD and IPS Empress CAD. Cheapest block packs will be FREE.Offer only available when all placed as one order.
Now Including IPS e.max® CAD MTCAD/CAM Block
PURCHASE APROGRAMAT
®
CS3& VP3 easy Vacuum Pump
AND RECEIVE IPS e.max CAD CRYSTALLISATION KIT, 4 BLOCKS PACKS*
& A COMPLIMENTARY COURSE HELD AT OUR ICDE, LEICESTER.
*Blocks selected: IPS Empress CAD LT C14 A3 | IPS e.max CAD LT C14 A2 & A3 | IPS e.max CAD HT C14 A2
BUY 17GET 5FREE
*
BUY 8GET 2FREE
*
BUY 5GET 1FREE
*
Programat® CS3 CEREC Special Edition
The new Programat® CS3 is designed to process IPS e.max® CAD. It allows crystallisation
and glaze firing procedures to be carried out in the dental office with utmost ease and
efficiency.
Designed for simple and intuitive operation, the furnace offers pre-set Ivoclar
Vivadent programs and a controlled cooling process.
In addition, the Programat® CS3 is equipped with the Digital Shade
Assistant system, which enables the tooth shade to be determined
on the basis of a digital photo using digital technology.
The glazing and crystallisation furnace with new DSA function
PRODUCT HIGHLIGHT
PRODUCT HIGHLIGHT
BUY 1GET 1FREE
*
*New Users Only
PURCHASE A
BLUEPHASE®
CurING LIGHt
AND RECEIVE £250RRP OF IVOCLAR VIVADENT
PRODUCT
FREE*
Fluor Protector S
1,100 mW/cm2
Output
Charging base with battery indicatorThe illuminated ring appears
black once fully charged
Easy operation
Two button control
Inductive charging
Enables contactless battery charging
Bluephase® StyleThe curing light
Click & Cure Every Time
1 2 3
Now Including IPS e.max® CAD MT
The department of Health recommends the application of
fluoride varnish to help reduce the risk of caries. As a general
rule, all children should have fluoride varnish applied twice
each year and all high-risk adults twice per year.
Additionally, if a child is ‘high-risk’ it is recommended for the
fluoride application to take place at least twice a year.
advantages:
• Colophony & Latex Free
• Prescription Free
• Indicated for Long Term Caries Prophylaxis
True innovation proves itself in use. A
perfect example of this is the Bluephase®
Style curing light with the specially
developed Polywave® LED. The curing light
is capable of polymerizing all current photo-
initiators and materials.
The Bluephase® Style curing light set new
standards in every respect. They are not only
the best-selling LED polymerisation lights in
Europe but they are also used in numerous
clinical studies. They have also been ranked
top light-curing unit by independent and
renowned test institutes.
The protective fluoride varnish
PRODUCT HIGHLIGHT
PRODUCT HIGHLIGHT HIGHLIGHT
i-KidsBecome a certified i-Kids practice
What is an i-Kids practice?
An i-Kids practice is committed to delivering preventative
messages and care to its child patients and their families.
Ivoclar Vivadent is supporting practices that invest in their
preventative products by providing you with a resources
pack.
All you have to do is meet the minimum spend on Fluor
Protector S and other products in the i-Kids range.
Please speak to
your local product
specialist for more
informationhas earned this
certificate for exceptionalcourage.
Signature:
C e r t i f i c a t e o fB r a v e r y
Ivoc
lar V
ivadent Pediatric Dental Solutio
ns
Protector of Beautiful and Healthy Teeth ww
w.iv
ocla
rviv
aden
t.co
m62
8543
/060
9/e/
Wen
ng
PRODUCT INFORMATION
Professional Care
www.ivoclarvivadent.com
Ivoclar Vivadent AG
Bendererstr. 2 │ 9494 Schaan │ Liechtenstein │ Tel.: +423 / 235 35 35 │ Fax: +423 / 235 33 60
2015-07-22, Karin Oetting, Professional Care -1/1-
Parents Flyer – Fluor Protector S
Counseling in the dental practice is important.
The new parents flyer serves as a source of information for parents. Here
basic questions and concerns of parents are explained, such as: "Why is
dental health important?", "What is bad for teeth?" Or "What is fluoride?"
Art. Nr. 680304 Flyer Fluor Protector S Parents (EN)
Art. Nr. 680303 Flyer Fluor Protector S Parents (DE)
i-Kids Sticker In keeping with the parents flyer is now also funny i-Kids stickers set of 3 for children available.
Art. Nr. 680319 Sticker i-Kids
MADRID
ANNECY
SCHAANVIENNA
ICDE UK
Madrid - 11th June 2016
INTERNATIONAL EXPERT SYMPOSIUM
THE QUALITY OF ESTHETICSpowered by ivoclar vivadent
For more information on any featured Ivoclar Vivadent product.
Please visit www.ivoclarvivadent.co.uk
*T&C’s Apply. Offers only available through Ivoclar Vivadent Product Specialists. All free items will be
sent on receipt of copy invoice, please allow 28 days for delivery. Offers cannot be combined or used in conjunction with any other offer. Offers
end 31/03/2016. E&EO
facebook.com/IvoclarVivadentUK
@IvoclarUK
Call Georgia: 0116 284 7886Visit: www.ivoclarvivadent.co.uk/education
with Dr. Chris McConnell & Dr. Markus Lenhard
EDUCATION
tHe WOrLD OF
RESTORATIVESMADRID ANNECY SCHAAN VIENNA
Composites can be a valid alternative for large anterior restorations. Given the right
technique and operator skills, composite restorations are not only highly aesthetic, but
they can be done in significantly less time than indirect alternatives. Based on several
clinical cases, our courses will show the importance of techniques and
the tricks needed to show the difference between aesthetic and
economic success and failure.
Additionally, the hands on course introduces you to the latest
skills for the modern and workable alternative to amalgam
fillings. Using techniques with the latest Bulk Fill materials you
will learn to place reliable, functional and aesthetically pleasing
posterior restorations.
Ivoclar Vivadent is hosting the 3rd International Expert Symposium on 11 June 2016 in Madrid.
Renowned international speakers will share and discuss their experiences with innovative direct and indirect
restorations. The talks are based on state-of-the-art research and evidence. Furthermore, the lecturers will
provide insights into their work at academic institutions and universities as well as into practical work.
Be part of this exciting event and receive valuable tips from highly recognised experts in the field of direct
and indirect restorations. We look forward to welcoming you to the International Expert Symposium 2016
in Madrid.
3rd-5th March 2016 Madrid, Spain
19th-21st May 2016 annecy, France
22nd-24th Sept 2016 Schaan, Liechtenstein
8th-10th Dec 2016 Vienna, austria
£795Price included flights,
transfers, accommodation and evening entertainment.
ONLY
Call Georgia: 0116 284 7886Visit: www.ivoclarvivadent.co.uk/education
Dr. Ronaldo Hirata Dr. Andreas Kurbad Rafael Piñeiro Sande, D.D.S.
9 HOURS
VERIFIABLE
CPD