PRODUCT DATASHEETStrada-SQ serieslast update 15/11/2012
Ordering number
FamilyTypeLEDColorDiameterHeightStyleOptic MaterialHolder MaterialFasteningStatus
C13118_STRADA-SQ-A-T
Strada-SQLensLUXEON MClear25 + 25 mm9 mmSquare PMMA - Screw, pin, glue Ready
FWHMEfficiencycd/lmGerber File
Asym degrees 93 % 0.300 Available
Ordering number
FamilyTypeLEDColorDiameterHeightStyleOptic MaterialHolder MaterialFasteningStatus
CA13119_STRADA-SQ-A-T
Strada-SQLensLUXEON MClear25 + 25 mm9.1 mmSquare PMMA - Screw, pin, tape Ready
FWHMEfficiencycd/lmGerber File
Asym degrees 93 % 0.300 Available
March 7th 2013 17:49 Copyright Ledil Oy - Subject to change without prior notice - Page 1/3
Ledil Oy Salorankatu 10 24240 SALOFinland
http://www.ledil.com email: [email protected] FAX: +358-2-733 8001
PRODUCT DATASHEETStrada-SQ serieslast update 15/11/2012
Ordering numberDescription
FamilyTypeLEDColorDiameterHeightStyleOptic MaterialHolder MaterialFasteningStatus
C124101
Strada-SQLensLUXEON MClear25 + 25 mm9 mmSquare PMMA - - Ready
FWHMEfficiencycd/lmGerber File
Asym degrees 93 %- Available
Positioning: External position element / Automatic assembling line.
Ordering numberDescription
FamilyTypeLEDColorDiameterHeightStyleOptic MaterialHolder MaterialFasteningStatus
CA124111
Strada-SQLensLUXEON MClear25 + 25 mm9.15 mmSquare PMMA - - Ready
FWHMEfficiencycd/lmGerber File
Asym degrees 93 %0.410 Available
Positioning: External position element / Automatic assembling line.
NOTE: The typical divergence will be changed by different color, chip size and chip positiontolerance. The typical total divergence is the full angle measured where the luminous intensityis half of the peak value.
March 7th 2013 17:49 Copyright Ledil Oy - Subject to change without prior notice - Page 2/3
Ledil Oy Salorankatu 10 24240 SALOFinland
http://www.ledil.com email: [email protected] FAX: +358-2-733 8001
PRODUCT DATASHEETStrada-SQ serieslast update 15/11/2012
GENERAL INFORMATION
- Product series especially designed & optimized for LUXEON M series of LEDs. - Special care taken to make light distribution as uniform as possible.- Lens material optical grade PMMA with high UV and temperature resistance. Allows use of high current andtemperature conditions.
Please find more information about used material from below:http://ledil.fi/sites/default/files/Documents/Technical/Material/PMMA%208N%20UL94_Yellow%20Card.pdfhttp://ledil.fi/sites/default/files/Documents/Technical/Material/PMMA%208N%20PLEXIGLAS-Datasheet.pdf
March 7th 2013 17:49 Copyright Ledil Oy - Subject to change without prior notice - Page 3/3
Ledil Oy Salorankatu 10 24240 SALOFinland
http://www.ledil.com email: [email protected] FAX: +358-2-733 8001
AD
BC AD
33
22
44
11
DESIGNED BY-
DATE
-
CHECKED BY
vsDATE
-
DRAWN BYas
DATE
25.9.2012
This drawing is our property.It can't be reproducedor communicated withoutour written agreement.
SCALE 2:1 WEIGHT 4,97 g SHEET 1/1
SIZE
A4PART NUMBER REV
001
DRAWING TITLE
STRADA-SQ-A-T
Ledil OySalorankatu 10FIN 24240 SALOFinland
Tolerances if not otherwise shown:According to DIN ISO 2768-1Linear measures:Up to 30mm class F, otherwise class M.
According to DIN ISO 2768-2Form and position:class K
Control for SPC marked dimensions.
Mechanical drawing
Isometric view9
Front view
Bottom view25
25
Top view