HYUNDAI FORKLIFT – ATTACHMENTS LINE-UP
HỆ THỐNG CÀNG KẸP THÔNG DỤNG
1Contact: Mr. Dzung – 0986.59.1986 – Sales Team Leader 1
Email: [email protected] - www.xenanghyundai.net
2
The types and shapes of objects
for logistics have increasingly
been diversified.
The most important condition is
the choice of proper attachment
for enhancing working
efficiency to the largest extent
under given working conditions
and within restricted time.
The diversified attachments
of the forklift trucks of
Hyundai will provide you
with vigor at the logistics
fields of yours.
Hyundai Forklift Attachments optimized for products with unique shape and type !
3Contact: Mr. Dzung – 0986.59.1986 – Sales Team Leader 1
Email: [email protected] - www.xenanghyundai.net
Notes for selecting the attachments
Select the attachments suitable for cargo to transfer.
Please note that operation of the attachments may be restricted dependent upon the nature of devices (e.g., visibility,
maintenance & service, and reduction of allowable load capacity).
The optimal forklift truck and the attachments suitable for the truck are the core
factors for achieving the maximum workability.
Popular attachments
Drum clamp
Paper roll clamp
Rotating fork
Carton clamp
Fork clamp
Side shift
Fork positioner
Pallet InverterLoad push
Drum picker
Hinged bucket
Hinged fork
Load stabilizer
Bale clamp
4Contact: Mr. Dzung – 0986.59.1986 – Sales Team Leader 1
Email: [email protected] - www.xenanghyundai.net
BALE CLAMP
Functions The arms of various sizes are attached, and
clamp cargo on both sides. It is allowed to
mount rubber pads on the arms for
protecting the surface of cargo.
Application Handling raw cotton, wool and pulp and
appropriate for unloading containers, for
example, at harbor
Type Synchronize, independent, shift type
5Contact: Mr. Dzung – 0986.59.1986 – Sales Team Leader 1
Email: [email protected] - www.xenanghyundai.net
CARTON CLAMP
Functions The wide arms clamp cargo on the sides
and transport the cargo
Application Handling cargo vulnerable to impact or
pressure such as boxed cargo, electronic
products (fridge, water heater) and
confectionery.
Type Synchronize, independent
6Contact: Mr. Dzung – 0986.59.1986 – Sales Team Leader 1
Email: [email protected] - www.xenanghyundai.net
DRUM CLAMP
Functions The arms shaped drums operate on both
sides. The clamp is capable of handling
one, two or four drums simultaneously
dependent upon application
Application Handling cargos of drums or similar
cylindrical containers (e.g., petrochemical
products, paints, inks, adhesives)
Type Rotating
7Contact: Mr. Dzung – 0986.59.1986 – Sales Team Leader 1
Email: [email protected] - www.xenanghyundai.net
DRUM PICKER
Functions Standing drums are clamped by the teeth of
the picker shaped eagle’s claws, and then
transported, or loaded/unloaded.
The picker is connected by a pin, and easy
of mounting and removing. You can use the
forklift for its own purpose after removing.
Application Handling cargos of drums or similar
cylindrical containers (e.g., petrochemical
products, paints, inks, adhesives)
Type One or two drums, shift type
8Contact: Mr. Dzung – 0986.59.1986 – Sales Team Leader 1
Email: [email protected] - www.xenanghyundai.net
FORK POSITIONER
Functions Allowed the operators to move the forks
quickly (to the left / right) and accurately to
fit different pallet sizes without leaving
their seats.
Application One of the most popular attachments.
Suitable for factory has got different pallet
sizes.
Type Standard type, shift type
9Contact: Mr. Dzung – 0986.59.1986 – Sales Team Leader 1
Email: [email protected] - www.xenanghyundai.net
SIDE SHIFT
Functions The fork carriage can be moved to the left /
the right while the gap between two forks is
immutable.
Application One of the most popular attachments.
Particularly useful for when operating in
tight environments, and for positioning
loads on racking without having to move
the truck itself.
Type Standard type, shift type
10Contact: Mr. Dzung – 0986.59.1986 – Sales Team Leader 1
Email: [email protected] - www.xenanghyundai.net
PAPER ROLL CLAMP
Functions Clamping and rotating round shaped
cargoes for transportation, unloading and
loading
Application Loading and unloading of cargo of roll type
at paper mill, printing house, newspaper
company, packaging factory
Type
360% rotating type (both-side opening type
and single-side opening type), and 180%
static type
11Contact: Mr. Dzung – 0986.59.1986 – Sales Team Leader 1
Email: [email protected] - www.xenanghyundai.net
HINGED FORK
Functions The fork is dumped up and down for
transporting and loading cargos of
cylindrical shape.
Application Transportation and loading of small lumber,
pipe and brick. (open-air yard of lumber,
sawmill, brick factory)
Type Standard type, shift type
12Contact: Mr. Dzung – 0986.59.1986 – Sales Team Leader 1
Email: [email protected] - www.xenanghyundai.net
HINGED BUCKET
Functions A bucket is added to the hinged fork, and
forklift can operate like a small loader. The
bucket is connected by a pin, and easy of
mounting and removing. You can use the
forklift truck for its own purpose after
removing the bucket.
Application Transportation of granular cargos such as
chemical fertilizer, sand, feeds, coal and
grain, and unloading the cargo (chemicals
factory, open-air yard of sand, feeds factory
or grain unloading yard).
Type Standard type, shift type
13
FORK CLAMP
Functions The attachment is mounted on forklift truck
for clamping work. The device is capable
for clamping various products by adjusting
the gap between the forks.
Application Handling steel cargo, textile products and
long cargo
TypeSynchronize, independent, and rotating type
(2 and 4 fork clamp types)
14Contact: Mr. Dzung – 0986.59.1986 – Sales Team Leader 1
Email: [email protected] - www.xenanghyundai.net
ROTATING FORK
Functions The attachment rotates 360 degrees: A steel
box (chip box) is rotated to pour cargo.
Also, pallet work is allowed as done by
common forklift truck.
Application Unloading and transportation of fluid
(liquid) cargo at waste processing company,
feed mill, food factory and foundry.
Type Standard type, shift type
15Contact: Mr. Dzung – 0986.59.1986 – Sales Team Leader 1
Email: [email protected] - www.xenanghyundai.net
RAM
Functions The Ram is a solid bar mounted at the front
or forklift. This is used to handle coiled iron
sheets, band steel, wire or carpet with their
center holes. This can be easily detached
for usual pallet work.
Application Steel factory, Textile factory
Type Standard type, shift type
16Contact: Mr. Dzung – 0986.59.1986 – Sales Team Leader 1
Email: [email protected] - www.xenanghyundai.net
PALLET INVERTER LOAD PUSH
Functions The attachment push and load cargo with
the pushing plate after removing pallet from
cargo truck or container. The forks are
mounted on the sides of the device, and
wrap the cargo to prevent deformation of
cargo
Application Releasing cargo in bags or boxes from
palettes stacked in multiple layers.
Appropriate for workplace recovering high-
price process palettes, and logistics of
petrochemical products.
TypeRotating type, shift type, push type,
composite clamping type
17
COMPANY INTRODUCTION• Nhat Lo Phat 168 Co., Ltd was set up in 2001 with the main business in trading,
supplying and maintaining all kinds of lift trucks.
• Together with the development of the Vietnamese Industry, we has been developing continuously. Offices, stores, branches and maintaining workshops have been expanded. At this moment, the Company is dealing with more than 100 lifting products with many different models and types, which are suitable with the demand of customers. All of the products are imported directly from developed industry countries such as Taiwan, China, Korea, Japan, etc. Those products help companies and factories to have more suitable choices for the most convenience in moving and storing goods.
• Though the time of operating in the market is not quite long, the achievement of Nhat Lo Phat 168 Co., Ltd is marked with the incessant efforts. The company’s name is well-known in the market with the lift truck logo.
• From 2010, we are the exclusive distributor of Hyundai forklift in Vietnam and we have been supplying all kinds of Hyundai forklifts to plenty of customers.
18Contact: Mr. Dzung – 0986.59.1986 – Sales Team Leader 1
Email: [email protected] - www.xenanghyundai.net
19
For more details, please contact:
Mr. Phạm Trung Dũng0986.59.1986 [email protected]
www.xenanghyundai.nethttp://xenanghanghyundai.blogspot.com/
Thank you for your attention !