Date :

1 2 3 4 5

1 Thickness LV3 1.5±0.075mm Digital Micrometer 1.52 1.52 1.52 1.51 1.51 OK

2 Diameter LV3 4.80±0.05 mm Pin Gauge /Plug Gauge OK

3 Position 0.20 AB VMM/Receiver Gauge /CMM OK

4 Position 0.15 ABC VMM/Receiver Gauge /CMM OK

5 Diameter LV3 8.10+0.10 /-0.00 mm Pin Gauge /Plug Gauge OK

6 Diameter LV3 4.80 ±0.05 mm Pin Gauge /Plug Gauge OK

7 Flatness 0.20 mm VMM /Height Gauge 0.11 0.11 0.11 0.12 0.11 OK

8 Diameter LV3 4.15 ±0.05 mm Pin Gauge /Plug Gauge OK

9 Position LV3 0.30mm DEA VMM/Receiver Gauge /CMM OK

10 Distance 4.00 ± 0.20 mm VMM /Height Gauge 4.10 4.08 4.12 4.11 4.10 OK

11 Position 0.30mm ABD VMM/Receiver Gauge /CMM OK

12 Diameter LV3 4.15 ±0.05 mm Pin Gauge /Plug Gauge OK

13Profile

Unilateral inwardLV3 0.30 mm DEA VMM/Receiver Gauge /CMM OK

14Profile

Unilateral inwardLV3 0.30 mm VMM/Receiver Gauge /CMM OK

15 Distance 15.44 ±0.25 mm VMM /Height Gauge 15.47 15.47 15.48 15.48 15.47 OK

16 Profile 0.25 DEA VMM/Receiver Gauge /CMM OK

17 Profile LV3 0.35 DEA VMM/Receiver Gauge /CMM OK

18Profile

Unilateral inward0.30 DEA VMM/Receiver Gauge /CMM OK

19 Diameter LV3 4.40±0.10 mm Pin Gauge /Plug Gauge OK

20 Position LV3 0.20 mm DEA VMM/Receiver Gauge /CMM OK

21 Diameter LV3 5.10±0.10 mm Pin Gauge /Plug Gauge OK

22 Position LV3 0.20 mm DEA VMM/Receiver Gauge /CMM OK

23 Distance 11.67 ± 0.25 mm VMM /Height Gauge 11.69 11.70 11.70 11.68 11.69 OK

24 Radius (G-G) R1.50 +0.30/-0.10 mm VMM/Radius Gauge OK

25 Thickness (G-G) 1.2 Min VMM /Point Micrometer 1.40 1.41 1.41 1.40 1.40 OK

26 Radius (E-E)(2places) R1.50 ±0.20 mm VMM/Radius Gauge OK

27 Thickness(E-E)(2places) 1.20 Min VMM /Point Micrometer 1.41 1.41 1.41 1.40 1.39 OK

28 Radius (B-B) R 0.50 ±0.20 VMM/Radius Gauge OK

29 Thickness (B-B) 1.20 Min VMM /Point Micrometer 1.41 1.41 1.40 1.41 1.41 OK

30 Radius (C-C) R 0.50 ±0.20 VMM/Radius Gauge OK

31 Thickness (C-C) 1.2 Min VMM /Point Micrometer 1.39 1.38 1.39 1.39 1.39 OK

32 Radius (D-D) R 0.50 ±0.20 VMM/Radius Gauge OK

33 Thickness (D-D) 1.20 Min VMM /Point Micrometer 1.39 1.42 1.38 1.38 1.40 OK

34 Material LV3A.Type:Alloy steel sheet /strip

B.Grade:HC 340LA PER EN10268Supplier Material Certificate OK

35 Steel mill JSW Supplier Material Certificate OK

36 Plating LV3

MFZn13TC per NES M4040

&Min 13 microns(13 microns to

25 microns)

Supplier report OK

37 Appearance

Free from burrs(10% of sheet

thickness allowed),No sharp edges &

Free from oil & grease,No line mark,

No miss blank, No crack,No Profile

offset No plating peel off,

No dull plating No damage ,no red

rust, no white rust

Visual OK

REMARKS : VMM-Vission measurement machine DV - Digital vernier RMTC - Raw Material Test Certificate

INSPECTED BY : Saravana APPROVED BY : Satish

ACCEPTED REJECTED ACCEPTED UNDER DEVIATION DEVIATION NO. & DATE

Refer RMTC Report

Refer RMTC Report

Refer PTC report

Visually Checked

OK to Radius Gauge

OK to Radius Gauge

OK to Radius Gauge

OK to Radius Gauge

OK to Radius Gauge

OK to Receiver gauge

OK to Receiver gauge

OK to Receiver gauge

OK to Plug Gauge

OK to Receiver gauge

OK to Receiver gauge

OK to Receiver gauge

OK to Receiver gauge

OK to Receiver gauge

OK to Plug Gauge

OK to Receiver gauge

OK to Plug Gauge

OK to Plug Gauge

VISUAL CHECKS : Free from Burrs, Tool marks.

DIMENSIONAL CHECKS

SL NO. PARAMETERSSpecial Char.

ClassSPECIFICATIONS INSTRUMENTS USED

ACTUAL

DECISION

OK to Plug Gauge

OK to Receiver gauge

OK to Receiver gauge

OK to Plug Gauge

OK to Plug Gauge

Part Name Back plate front LH Invoice / DC No. & date PMTPVT1-12022

Part No. 3053959 C Quantity Supplied Kg / Nos 960 Nos.

Customer MAGNA CLOSURES Control plan No. PMT / CP / 3053959

PM Techno Pvt. Ltd. REF NO. : PMT/QAD/F/03

REV.NO: 00

REV. DATE: 03.10.2017

R/C No. :9404 16/10/2021FINAL INSPECTION REPORT