Download - PIR FIXTURE SENSOR - ESL VISION
ITEM#
ESL-KNX-FS6 Konex PIR Sensor, 40ft Max Height, 2,826 SQFT @ 40ft Height/ 360°
COLOR
WHITE
DESCRIPTION
Catalog Data:
*See next page for detailsSimple App Programming:
Technical Specifications:
Setting Options:
Key Features & Benefits:• Wirelessly Control Multiple Fixtures with a Single Sensor• 0–10V Wireless Dimming Control• Adjustable Settings with the ESL Lighting App• Use For Either Occupancy or Vacancy• IP66 Wet Rated
Power Supply: 6–12 VDCHF System: 5.8Ghz CWSensor Type: Passive Infrared (PIR)Dimming Control Output: 0–10V Max. 25mA sinking currentDetection Radius/angle: 30ft@40ft Height/360°Detection Area (square footage): 2,826ft²@ 40ft Height/360°Mounting Height: 40ft MaxMotion Range: 50ftHumidity: Max 95% RHTemperature: -40°F ~ 167°F (-40°C ~ 75°C)Program: Use ESL Lighting App
Motion Sensitivity Adjustment: 1–100%Time Delay: 1–60 minStandby Dim Level: 1–100%Standby Time Delay: 1–60 min or infinity
Copyright © 2020 ESL Vision, LLC. All rights reserved. Rev: 08/28/2020
PIR FIXTURE SENSOR
Notes:
Project: Date:
Catalog #:
ESL-KNX-FS6 PAGE 1 OF 4
STAND-BY TIME DELAY
Light will switch to OFF after the stand-by time of (1 min – 60 min) has elapsed. Setting to ∞ will keep light from turning off.
STAND-BY DIM LEVEL
When no movement is detected after the hold time elapses, the light dims to stand-by level. The dimming range can be set between 1% – 100% power.
TIME DELAY
The light can be set to stay ON for any period of time between approximately 1 minute to a maximum of 60 minutes. Any detection of movement before the programmed hold time elapses and the timer with re-start. It is recommended to select the shortest time for adjusting the detection zone and for performing the walk test.
MOTION SENSITIVITY
Motion Sensitivity is the term used to describe the amount of motion required to register occupancy within the radii of the circular detection zone after sensor has been mounted and installed at a height of 40ft.
VACANCY
Setting the sensor to VACANCY will keep the light on until no motion has been detected before activating the settings. The light will have to be physically turned on to reactivate the light and start the time delay.
OCCUPANCY
Setting the sensor to OCCUPANCY will turn on light and activate the time delay after motion has been detected.
ESL’s Konex FS6 PIR Fixture Sensor controls motion sensing and is programmed by downloading the ESL Lighting App on Google Play.*
*Further directions on setting up the app and commissioning your system can be found in the Spectrum/Konex User Guide.
Simple App Programming:
The Konex FS6 PIR Fixture Sensor will control fixtures with an added RPP or Spectrum fixtures with an integrated RPP.
A single sensor will manage multiple fixtures that are placed into a single group. When naming groups and components, use naming conventions that makes it easy to locate and identify them. Please refer to the Spectrum/Konex User Guide for more instruction on designing a commissioning plan and how to create groups with the ESL Lighting App.
All the fixtures in this warehouse example are placed in one group titled WAREHOUSE. *Note that the sensors are not included in this group.
The fixtures and sensor for each aisle are combined into their own groups, titled AISLE1, AISLE2 and AISLE3. The sensor that is placed in each group will control all of the fixtures within that group.
A1-F1A1-F2
A1-S1
GROUP:AISLE1A1-F3A1-F4A1-F5A1-F6
A2-F1A2-F2
A2-S1
GROUP:AISLE2A2-F3A2-F4A2-F5A2-F6
A3-F1A3-F2
A3-S1
GROUP:AISLE3A3-F3A3-F4A3-F5A3-F6
GROUP:WAREHOUSE
Grouping Diagram:
Copyright © 2020 ESL Vision, LLC. All rights reserved. Rev: 08/28/2020
PIR FIXTURE SENSORESL-KNX-FS6 — Programming PAGE 2 OF 4
Main Group: WAREHOUSE Group 1: AISLE1 Group 2: AISLE2 Group 3: AISLE3
Side View Coverage
0'
27'
40'
30' 20' 12' 6' 0' 6' 12' 20' 30'
Top View Coverage
60ft
30'
0'
15'
15'
30'30' 30'15'15' 0'
Coverage:
Copyright © 2020 ESL Vision, LLC. All rights reserved. Rev: 08/28/2020
PIR FIXTURE SENSORESL-KNX-FS6 — Technical Specifications PAGE 3 OF 4
1.4"2"
1.4"
0.7"
1.29"
1.77"
1.63"1.29"
Ø 2.4"
0.8"
Threaded Collar
Rubber Gasket
Nut
Lens
Dimensions:
KNX-FS6 wiring with 12VDC wire
dimming ballast or LED driver
KNX-FS6 wiring with AC/DC Adapter
and dimming ballast or LED driver
Wiring:
0.2" (minimum)
Lens
TighteningNut
RubberGasket
OutsideFixture Wall
InsideFixture Wall
Tightening Nut
Lens
LEDControllerKNX-FS6
OutsideFixture Wall
InsideFixture Wall
KNX-FS6
RubberGasket
TighteningNut
Mounting:
Copyright © 2020 ESL Vision, LLC. All rights reserved. Rev: 08/28/2020
PIR FIXTURE SENSORESL-KNX-FS6 — Installation PAGE 4 OF 4