800-243-8162www.indeeco.com4
Heaters rated above these capacities require a magnetic con-tactor, with the thermostat controlling the contactor holding coil.
The thermostat’s pilot duty rating is 250 VA at 277 volts maxi-mum.
Element Spacers are made from Type 304 stainless steel to maintain a uniform distance between elements, thus prevent-ing hot spots.
Epoxy Seals for a moisture resistant seal where fluid temperatures do not exceed 250° F.
UL and CSA Listings are available. All standard copper, Type 304 and 316 stainless steel and Incoloy sheathed heaters are listed by the Underwriters Laboratories under Reference E23541. These heaters, as well as steel sheathed heaters, are also available with the CSA (Canadian Standards Association) label under File No. LR11895. Some non-standard constructions can be UL and CSA labeled. Consult factory for availability.
Construction Features
1” — 2-1/2” Pipe Thread Heaters• Element bends repressed uniformly to insure electrical insulation
integrity.
• One piece forging of hex, thread and riser assures reliability.
• Element spacers prevent hot spots.
• Bussing is permanent and encapsulated in epoxy seal.
• UL CSA label furnished on all standard copper, stainless steel and Incoloy sheathed heaters, NEMA Type 1, 4 and 4x environments.
Tubular Elements are welded or silver soldered into a hex head pipe thread fitting. Elements have 80/20 nickel-chromium resis-tance coils centered in a heavy gauge metal tube surrounded by magnesium oxide insulation. Through rolling, the magnesium oxide is compacted for rapid heat transfer from the coil to the sheath. Elements are annealed, bent and then 360° repressed to insure magnesium oxide integrity in the bent area.
1” and 1-1/4” pipe thread heaters have .312” diameter elements for operation up to 277 volts. 2” and 2-1/2” pipe thread heaters have .475” diameter elements suitable for operation up to 600 volts.
Pipe Thread Fittings of forged brass, silver soldered to the sheath, are furnished as standard with copper sheathed heaters. Steel and stainless steel sheathed elements are welded into fittings of like material.
Outlet Boxes are furnished on heaters without a built-in thermo-stat. A 4” NEMA 1 octagon outlet box having 3/4” knockouts is standard.
2” NPT stock heaters (without thermostats) are furnished with cast liquidproof outlet boxes.
Heaters with a built-in thermostat are normally furnished with a NEMA 1 rectangular sheet metal enclosure having combination 1/2”–3/4” knockouts. However, those heaters drawing more than 40 amps are furnished with welded steel outlet boxes having 1” or 1-1/4” hubs for electrical connec-tions.
Built-In Thermostats provide automatic temperature control without the necessity of installing a separate well for the thermostat bulb in the field and making electrical connections between the heater and control. The thermostats are fully adjustable from 0-100/120° F, 40-120° F, or 60-250° F.
Standard thermostats are single-pole for single-phase heaters and for pilot duty three phase applications and two pole for de-energizing load carrying applications, see page 48 for selec-tion criteria.
Pipe Thread Heaters
800-243-8162www.indeeco.com
Quick Ship Pipe Thread Heaters
5
1” NPT Pipe Thread Heaters
304 SS Sheath, 304 SS Fitting
304 SS Sheath, Steel Fitting
Quick ship, build your catalog number
50 / 37.5 W/Sq.In.
20 / 15 W/Sq.In.
7111A_ _ _ _ _ _ _Base number from chart below
Select letter indicatingvoltage/phase from chart
Thermostat Range0= No thermostat2= 60-250° F3= 0-100/120° F
Thermostat Style0= No thermostat1= Single pole2= Two pole
Terminal Box1= Nema 12= NEMA 45= NEMA 4/12 painted steel6= NEMA 4X fiberglass
Elements KWB
Dimension(Inches)
CatalogNumber
Watts/in2
1 Phase12
0V
208V
240V
1
.45 8-1/2 5A6 37.5 C
.60 8-1/2 5B6 50.0 J
.75 11-7/8 5C6 37.5 C
1.00 11-7/8 5D6 50.0 J
1.25 18-3/4 5E6 37.5 C
1.67 18-3/4 5F6 50.0 J
1.88 27-1/4 5G6 37.5 C
2.50 27-1/4 5H6 50.0 J
3.00 42-1/2 5I6 37.5 C
4.00 42-1/2 5J6 50.0 J
Elements KWB
Dimension(Inches)
CatalogNumber
Watts/in2
1 Phase
120V
208V
240V
1
.38 14-1/2 5K6 15 C
.50 14-1/2 5L6 20 J
.75 27-1/4 5M6 15 C
1.00 27-1/4 5N6 20 J
1.25 44-1/4 5O6 15 C
1.67 44-1/4 5P6 20 J
Quick Ship Pipe Thread Heaters
800-243-8162www.indeeco.com6
1-1/4” NPT Pipe Thread Heaters
304 SS Sheath, 304 SS Fitting
304 SS Sheath, Steel Fitting
Quick ship, build your catalog number
50 / 37.5 W/Sq.In.
20 / 15 W/Sq.In.
7121A_ _ _ _ _ _ _Base number from chart below
Select letter indicatingvoltage/phase from chart
Thermostat Range0= No thermostat2= 60-250° F3= 0-100/120° F
Thermostat Style0= No thermostat1= Single pole2= Two pole
Terminal Box1= Nema 12= NEMA 45= NEMA 4/12 painted steel6= NEMA 4X fiberglass
Elements KWB
Dimension(Inches)
CatalogNumber
Watts/in2
1 Phase
3 Phase
120V
208V
240V
208V
240V
3
1.35 8-1/2 6A6 37.5 C D
1.80 8-1/2 6B6 50.0 J K
2.25 11-7/8 6C6 37.5 C D
3.00 11-7/8 6D6 50.0 J K
3.75 18-3/4 6E6 37.5 C D
5.00 18-3/4 6F6 50.0 J K
5.63 27-1/4 6G6 37.5 C D
7.50 27-1/4 6H6 50.0 J K
9.00 42-1/2 6I6 37.5 C D
12.00 42-1/2 6J6 50.0 J K
Elements KWB
Dimension(Inches)
CatalogNumber
Watts/in2
1 Phase
3 Phase
120V
208V
240V
208V
240V
3
1.10 14-1/2 6L6 15 C D
1.50 14-1/2 6M6 20 J K
2.25 27-1/4 6N6 15 C D
3.00 27-1/4 6O6 20 J K
3.75 44-1/4 6P6 15 C D
5.00 44-1/4 6Q6 20 J K
Quick Ship Pipe Thread Heaters
800-243-8162www.indeeco.com7
2” NPT Pipe Thread Heaters
304 SS Sheath, 304 SS Fitting
Copper Sheath, Brass Fitting
304 SS Sheath, Steel Fitting
Quick ship, build your catalog number
50 / 37.5 W/Sq.In.
50 W/Sq.In.
20/15 W/Sq.In.
7131 _ _ _ _ _ _ _ _Base number from chart below
Select letter indicatingvoltage/phase from chart
Thermostat Range0= No thermostat2= 60-250° F3= 0-100/120° F
Thermostat Style0= No thermostat1= Single pole2= Two pole
Terminal Box1= Nema 12= NEMA 45= NEMA 4/12 painted steel6= NEMA 4X fiberglass
Elements KWB
Dimension(Inches)
CatalogNumber
Watts/in2
1 Phase 3 Phase
120V
208V
240V
480V
208V
240V
480V
3
2.25 8-1/2 A7A6 37.5 J K3.00 8-1/2 A7B6 50.0 C D U3.75 13 A7C6 37.5 J K5.00 13 A7D6 50.0 C D U5.60 18-1/2 A7E6 37.5 J K7.50 18-1/2 A7F6 50.0 C D U9.00 28-3/4 A7G6 37.5 J K
10.00 24-1/4 A7H6 50.0 C D U11.20 35-1/2 A7I6 37.5 J K12.00 28-1/2 A7J6 50.0 C D U13.50 42 A7K6 37.5 J K15.00 35-1/2 A7L6 50.0 U18.00 42 A7M6 50.0 U
Elements KWB
Dimension(Inches)
CatalogNumber
Watts/in2
1 Phase 3 Phase
120V
208V
240V
480V
208V
240V
480V
3
3 8-1/4 A7N1 50 C D U4 10-1/2 A7O1 50 C D U5 12-3/4 A7P1 50 C D U6 15 A7Q1 50 C D U7 17-1/4 A7R1 50 C D U8 19-1/2 A7S1 50 C D U9 21-3/4 A7T1 50 U
10 24 A7U1 50 U12 28-1/2 A7V1 50 C D U15 35-1/4 A7W1 50 U16 37-3/4 A7X1 50 U
Elements KWB
Dimension(Inches)
CatalogNumber
Watts/in2
1 Phase 3 Phase
120V
208V
240V
480V
208V
240V
480V
3
2.25 18-3/4 C8A6 15 J K3.00 18-3/4 C8B6 20 C D U3.75 29-3/4 C8C6 15 J K5.00 29-3/4 C8D6 20 C D U5.60 49-3/4 C8E6 15 J K7.50 43-3/4 C8F6 20 C D U9.00 69 C8G6 15 J K
10.00 57-3/4 C8H6 20 C D U12.00 69 C8I6 20 C D U
Quick Ship Pipe Thread Heaters
800-243-8162www.indeeco.com8
2 1/2” NPT Pipe Thread Heaters
304 SS Sheath, 304 SS Fitting
304 SS Sheath, Steel Fitting
Quick ship, build your catalog number
50 / 37.5 W/Sq.In.
50 W/Sq.In.
7141A_ _ _ _ _ _ _Base number from chart below
Select letter indicatingvoltage/phase from chart
Thermostat Range0= No thermostat2= 60-250° F3= 0-100/120° F
Thermostat Style0= No thermostat1= Single pole2= Two pole
Terminal Box1= Nema 12= NEMA 45= NEMA 4/12 painted steel6= NEMA 4X fiberglass
Elements KWB
Dimension(Inches)
CatalogNumber
Watts/in2
1 Phase 3 Phase12
0V
208V
240V
480V
208V
240V
480V
3
2.25 8-1/2 9A6 37.5 J K3.00 8-1/2 9B6 50.0 C D U3.75 13 9C6 37.5 J K5.00 13 9D6 50.0 C D U5.60 18-1/2 9E6 37.5 J K7.50 18-1/2 9F6 50.0 C D U9.00 28-3/4 9G6 37.5 J K
10.00 24-1/4 9H6 50.0 C D U11.20 35-1/2 9I6 37.5 J K12.00 28-3/4 9J6 50.0 C D U13.50 42 9K6 37.5 J K15.00 35-1/2 9L6 50.0 U18.00 42 9M6 50.0 U
Elements KWB
Dimension(Inches)
CatalogNumber
Watts/in2
1 Phase 3 Phase
120V
208V
240V
480V
208V
240V
480V
3
2.25 8-1/4 9N1 15 J K3.00 8-3/4 9O1 20 C D U3.75 29-3/4 9P1 15 J K5.00 29-3/4 9Q1 20 C D U5.60 43-3/4 9R1 15 J K7.50 43-3/4 9S1 20 C D U9.00 69 9T1 15 J K
10.00 57-3/4 9U1 20 C D U12.00 69 9V1 20 C D U
Stock Pipe Thread Heaters
800-243-8162www.indeeco.com9
2” Pipe Thread HeatersWater
Numberof
ElementsKW
Stock Without Thermostat, NEMA 4 Terminal Box
B Dimension(Inches)
CatalogNumber
Availability
3 Phase
208V
240V
480V
3
4.5 11-3/4 S7131A066208U • • S
6.0 15-1/4 S7131A086208U • • S
7.5 18-1/2 S7131A096208U • • S
9.0 21-3/4 S7131A106208U • • S
12.0 28-1/2 S7131A116208U • • S
15.0 35-1/4 S7131A126208U • • S
18.0 42 S7131A136208U S
Numberof
ElementsKW
Stock Without Thermostat, NEMA 4 Terminal Box
B Dimension(Inches)
CatalogNumber
Availability
3 Phase
208V
240V
480V
3
3 8-1/4 S7131A141200D S •
3 8-1/4 S7131A141200U • S
4 10-1/2 S7131A151200D S •
4 10-1/2 S7131A151200U • S
5 12-3/4 S7131A171200D S •
5 12-3/4 S7131A171200U • S
6 15 S7131A201200D S •
6 15 S7131A201200U • S
7 17-1/4 S7131A221200D S •
7 17-1/4 S7131A221200U • S
8 19-1/2 S7131A281200D S •
8 19-1/2 S7131A281200U • S
9 21-3/4 S7131A291200D S •
9 21-3/4 S7131A291200U • • S
10 24 S7131A301200D S •
10 24 S7131A301200U • • S
12 28-1/2 S7131A321200D S •
12 28-1/2 S7131A321200U • S
15 35-1/4 S7131A331200U • S
16 37-3/4 S7131A341200U • S
304 SS Sheath, 304 SS Fitting
Copper Sheath, Brass Fitting
50 W/Sq.In.
50 W/Sq.In.
800-243-8162www.indeeco.com10
Pipe Thread Heaters
Number of
Elements
120V
KW
Availability1 PhaseB
Dimensions(Inches)
CatalogNumber
208V
240V
Water304 SS Sheath, 304 SS Fitting 50 W/Sq. In.
•••••••••
•••••••••••
••••••••••
1
.5
.6.75.851
1.251.52
2.534
6-1/27-1/2
910
11-1/214
16-1/221-3/426-3/4
3242-1/4
7111N0167111N0267111N0367111N0467111N0567111N0667111N0767111N0867111N0967111N1067111N116
Please specify volts, phase, terminal box rating and, if needed, thermostat range from options listed on page 16.
Without Thermostat, NEMA 1 Terminal Box
120V
Availability1 PhaseB
Dimensions(Inches)
CatalogNumber
208V
240V
•••••••••
•••••••••••
••••••••••
7-1/28-1/2
1011
12-1/215-1/417-3/422-3/4
2833
43-1/4
7111N1267111N1367111N1467111N1567111N1667111N1767111N1867111N1967111N2067111N2167111N226
With Built-In Thermostat, NEMA 1 Terminal Box
1” Pipe Thread Heaters
Number of
Elements
120V
KW
Availability1 PhaseB
Dimensions(Inches)
CatalogNumber
208V
240V
Oil304SS Sheath, 304 SS Fitting 20 W/Sq. In.
••••••••••
•••••••••
••••••••
1
.25.3
.375
.425.5
.625.751
1.52
7-1/29
10-3/4121417
20-1/426-3/439-1/252-1/4
7111N2047111N2147111N2247111N2347111N2447111N2547111N2647111N2747111N2847111N294
120V
Availability1 PhaseB
Dimensions(Inches)
CatalogNumber
208V
240V
••••••••••
•••••••••
••••••••
7-1/29
10-3/4121417
20-1/426-3/439-1/252-1/4
7111N3047111N3147111N3247111N3347111N3447111N3547111N3647111N3747111N3847111N394
Please specify volts, phase, terminal box rating and, if needed, thermostat range from options listed on page 17.
Without Thermostat, NEMA 1 Terminal Box With Built-In Thermostat, NEMA 1 Terminal Box
Pipe Thread Heaters
800-243-8162www.indeeco.com11
1-1/4” Pipe Thread Heaters
Number of
Elements
120V
KW
Availability1 Phase 3 PhaseB
Dimensions(Inches)
CatalogNumber
208V
240V
480V
208V
240V
480V
Water304 SS Sheath, 304 SS Fitting 50 W/Sq. In.
•••••••
•••••••
•••••
•••••••••••••••••••••••••
•••••••••••••••••
••••••••
••••••••••
•••••••••
1
2
3
.6.751
1.52
2.534
1.21.52
2.53
3.5456
1.51.83
3.754.5
5.256
7.59
12
7-1/29
11-1/216-1/221-3/426-3/4
3242
7-1/29
11-1/214
16-1/219-1/421-3/426-3/4
326-1/47-1/2
11-1/214
16-1/219-1/421-3/426-3/4
3242
7121U1167121U1267121U1367121U1467121U1567121U1667121U1767121U1867121U3067121U3167121U3267121U3367121U3467121U3567121U3667121U3767121U3867121U4967121U5067121U5167121U5267121U5367121U5467121U5567121U5667121U5767121U586
Please specify volts, phase, terminal box rating and, if needed, thermostat range from options listed on page 17.*UL Listing is available with thermostat built-in NEMA 1 Box only. For all other terminal box options, use 712N designation.
120V
Availability1 Phase 3 PhaseB
Dimensions(Inches)
CatalogNumber*
208V
240V
480V
208V
240V
480V
•••••••
•••••••
•••••
•••••••••••••••••••••••••
•••••••••••••••••
••••••••
••••••••••
•••••••••
8-3/410-1/412-3/4
1823
28-1/433-1/443-1/28-3/4
10-1/412-3/415-1/2
1820-1/2
2328-1/433-1/47-3/48-3/4
12-3/415-1/2
1820-1/2
2328-1/433-1/443-1/4
7121U2167121U2267121U2367121U2467121U2567121U2667121U2767121U2867121U4067121U4167121U4267121U4367121U4467121U4567121U4667121U4767121U4867121U5967121U6067121U6167121U6267121U6367121U6467121U6567121U6667121U6767121U686
Without Thermostat, NEMA 1 Terminal Box With Built-In Thermostat, NEMA 1 Terminal Box
Pipe Thread Heaters
800-243-8162www.indeeco.com12
Number of
Elements
120V
KW
Availability1 Phase 3 PhaseB
Dimensions(Inches)
CatalogNumber
208V
240V
480V
208V
240V
480V
Oil304 SS Sheath, 304 SS Fitting 20 W/Sq. In.
•••••••••••••••••••••••
•••••••
•••••••••••••••
•••••••
•••••••••••••••
••••••
••••••
1
2
3
.25.375
.5.751
1.251.52.5
.751
1.251.5
1.752
2.534
1.52.25
33.754.56
7-3/410-3/4
1420-1/226-3/433-1/439-1/252-1/47-3/4
10-3/414
17-1/420-1/223-1/226-3/433-1/439-1/252-1/4
1420-1/426-3/433-1/439-1/252-1/4
7121U4047121U4147121U4247121U4347121U4447121U4547121U4647121U4747121U5647121U5747121U5847121U5947121U6047121U6147121U6247121U6347121U6447121U6547121U7647121U7747121U7847121U7947121U8047121U814
Please specify volts, phase, terminal box rating and, if needed, thermostat range from options listed on page 17.*UL Listing is available with thermostat built-in NEMA 1 Box only. For all other terminal box options, use 712N designation.
Without Thermostat
120V
Availability1 Phase 3 PhaseB
Dimensions(Inches)
CatalogNumber*
208V
240V
480V
208V
240V
480V
•••••••••••••••••••••••
•••••••
•••••••••••••••
•••••••
•••••••••••••••
••••••
••••••
7-3/410-3/4
1420-1/226-3/433-1/439-1/252-1/47-3/4
10-3/414
17-1/420-1/223-1/226-3/433-1/439-1/252-1/4
1420-1/426-3/433-1/439-1/252-1/4
7121U4847121U4947121U5047121U5147121U5247121U5347121U5447121U5547121U6647121U6747121U6847121U6947121U7047121U7147121U7247121U7347121U7447121U7547121U8247121U8347121U8447121U8547121U8647121U874
With Built-In ThermostatWithout Thermostat, NEMA 1 Terminal Box With Built-In Thermostat, NEMA 1 Terminal Box
1-1/4” Pipe Thread Heaters
Pipe Thread Heaters
800-243-8162www.indeeco.com13
2” Pipe Thread Heaters
Number of
Elements
120V
KW
Availability1 Phase 3 PhaseB
Dimensions(Inches)
CatalogNumber
208V
240V
480V
208V
240V
480V
••••••
•••••
•••
••••••••••••••••
••••••
••••••••••••••••
•••••••
•••••••
••••••••••
••••••
••••••••••
••••••••••
••••••••••
1
2
3
11.52
2.534562
2.53
3.54568
10123
3.754.5
5.256
7.59
121518
8-1/211-3/415-1/418-1/221-3/428-1/235-1/4
428-1/2
1011-3/413-1/215-1/418-1/221-3/428-1/235-1/4
428-1/2
1011-3/413-1/215-1/418-1/221-3/428-1/235-1/4
42
7131U1467131U0567131U0767131U1567131U1667131U1767131U1867131U1967131U2367131U2467131U2567131U2067131U2167131U2267131U3167131U2667131U3767131U2767131U2867131U2967131U3067131U3267131U3467131U3567131U3667131U3867131U3967131U406
Please specify volts, phase, terminal box rating and, if needed, thermostat range from options listed on page 17.*UL Listing is available with thermostat built-in NEMA 1 Box only. For all other terminal box options, use 713N designation.
Without Thermostat, NEMA 1 Terminal Box
120V
Availability1 Phase 3 PhaseB
Dimensions(Inches)
CatalogNumber*
208V
240V
480V
208V
240V
480V
••••••
•••••
•••
••••••••••••••••
••••••
••••••••••••••••
•••••••
•••••••
•••••••••
••••••
••••••••
•••••••••
•••••••••
8-1/211-3/415-1/418-1/221-3/428-1/235-1/4
428-1/2
1011-3/413-1/215-1/418-1/221-3/428-1/235-1/4
428-1/2
1011-3/413-1/215-1/418-1/221-3/428-1/235-1/4
42
7131U4167131U4267131U4367131U4467131U4567131U4667131U4767131U4867131U4967131U5067131U5167131U5267131U5367131U5467131U5567131U5667131U5767131U5867131U5967131U6067131U6167131U6267131U6367131U6467131U6567131U6767131U6867131U696
With Built-In Thermostat, NEMA 1 Terminal Box
Water304 SS Sheath, 304 SS Fitting 50 W/Sq. In.
Without Thermostat, NEMA 1 Terminal Box With Built-In Thermostat, NEMA 1 Terminal Box
Pipe Thread Heaters
800-243-8162www.indeeco.com14
2” Pipe Thread Heaters
Number of
Elements
120V
KW
Availability1 Phase 3 PhaseB
Dimensions(Inches)
CatalogNumber
208V
240V
480V
208V
240V
480V
WaterCopper Sheath, Brass Fitting 50 W/Sq. In.
••••••
•••••
••••
••••••••••••••••
••••••••••
••••••••••••••••
•••••••••••
•••••••
•••••••••
••••••••••••
•••••••••••••
••••••••••••••
•••••••••••••••
••••••
•••••
••••
••••••••••••••••
••••••••••
••••••••••••••••
•••••••••••
•••••••
•••••••••
••••••••••••
•••••••••••••
••••••••••••••
•••••••••••••••
1
2
3
11.52
2.534562
2.53
3.54568
10123
3.754
4.55
5.2567
7.589
1012151618
8-1/411-3/4
1518-1/421-3/428-1/235-1/441-3/48-1/4
1011-3/413-1/4
1518-1/421-3/428-1/235-1/441-3/48-1/4
1010-1/211-3/412-3/413-1/4
1517-1/418-1/419-1/221-3/4
2428-1/235-1/437-3/441-3/4
7131U3617131U0517131U0717131U3717131U3817131U3917131U4017131U4117131U2317131U2417131U5017131U5117131U2717131U5217131U3117131U5317131U5417131U5517131U6217131U6317131U6417131U6517131U6617131U6717131U6817131U6917131U7017131U7117131U7217131U7317131U7417131U7517131U7617131U771
Please specify volts, phase, terminal box rating and, if needed, thermostat range from options listed on page 17.*UL Listing is available with thermostat built-in NEMA 1 Box only. For all other terminal box options, use 713N designation.
Without Thermostat, NEMA 1 Terminal Box
120V
Availability1 Phase 3 PhaseB
Dimensions(Inches)
CatalogNumber*
208V
240V
480V
208V
240V
480V
9-1/412-3/4
1619-1/222-3/429-1/236-1/4
439-1/4
1112-3/414-1/4
1619-1/222-3/429-1/236-1/4
439-1/4
1111-1/212-3/413-3/414-1/4
1618-1/419-1/220-1/222-3/4
2529-1/236-1/438-1/4
43
7131U4217131U4317131U4417131U4517131U4617131U4717131U4817131U4917131U1817131U5617131U2517131U5717131U1917131U5817131U2117131U5917131U6017131U6117131U7817131U7917131U8017131U8117131U8217131U8317131U8417131U8517131U8617131U8717131U8817131U8917131U9017131U9117131U9217131U931
With Built-In Thermostat, NEMA 1 Terminal BoxWithout Thermostat, NEMA 1 Terminal Box With Built-In Thermostat, NEMA 1 Terminal Box
Pipe Thread Heaters
800-243-8162www.indeeco.com15
2” Pipe Thread Heaters
Number of
Elements
120V
KW
Availability1 Phase 3 PhaseB
Dimensions(Inches)
CatalogNumber
208V
240V
480V
208V
240V
480V
OilSteel Sheath, Steel Fitting 20 W/Sq. In.
•••••••••••••
•••••
••••••••••••••••••••••
•••••••••••••••••••••••
•••••
•••••••••
•••••••••
••••••••••
••••••••••
•••••••••
•••••••••••••
•••••
••••••••••••••••••••••
•••••••••••••••••••••••
•••••
•••••••••
•••••••••
••••••••••
••••••••••
•••••••••
1
2
3
11.52
2.531
1.51.75
22.252.53456
1.52.25
33.754.56
7.59
1012
18-1/227
35-1/443-3/4
5210
14-1/416-1/418-1/220-1/222-3/4
2735-1/443-3/4
529-3/4
14-1/418-1/222-3/4
2735-1/443-3/4
5257-1/268-1/2
7131U2347131U2447131U2547131U2647131U2747131U3347131U0347131U3547131U3647131U3747131U3847131U0647131U0847131U1047131U1247131U4747131U4847131U4947131U5047131U5147131U5247131U5347131U5447131U5547131U564
Please specify volts, phase, terminal box rating and, if needed, thermostat range from options listed on page 17.*UL Listing is available with thermostat built-in NEMA 1 Box only. For all other terminal box options, use 713N designation.
Without Thermostat
120V
Availability1 Phase 3 PhaseB
Dimensions(Inches)
CatalogNumber*
208V
240V
480V
208V
240V
480V
18-1/227
35-1/443-3/4
5210
14-1/416-1/418-1/220-1/222-3/4
2735-1/443-3/4
529-3/4
14-1/418-1/222-3/4
2735-1/443-3/4
5257-1/268-1/2
7131U2847131U2947131U3047131U3147131U3247131U3947131U0147131U4047131U4147131U4247131U0547131U4347131U4447131U4547131U4647131U5747131U5847131U5947131U6047131U6147131U6247131U6347131U6447131U6547131U664
With Built-In ThermostatWithout Thermostat, NEMA 1 Terminal Box With Built-In Thermostat, NEMA 1 Terminal Box
Pipe Thread Heaters
800-243-8162www.indeeco.com16
2-1/2” Pipe Thread Heaters
1 and 2 element designs available. Consult factory.Please specify volts, phase, terminal box rating and, if needed, thermostat range from options listed on page 16.*UL Listing is available with thermostat built-in NEMA 1 Box only. For all other terminal box options, use 714N designation.
Number of
Elements
120V
KW
Availability1 Phase 3 PhaseB
Dimensions(Inches)
CatalogNumber
208V
240V
480V
208V
240V
480V
••
••••
•••••
•••••••
••••••
•••••••
••••••••
••
••••
•••••
•••••••
••••••
•••••••
••••••••
3
34.56
7.59
12151820
811-1/214-3/4
1821-1/228-1/4
3541-1/2
46
811-1/214-3/4
1821-1/228-1/4
3541-1/2
46
7141U6367141U7267141U6767141U6967141U7167141U7567141U7767141U7967141U736
Without Thermostat
120V
Availability1 Phase 3 PhaseB
Dimensions(Inches)
CatalogNumber*
208V
240V
480V
208V
240V
480V
7141U7467141U7667141U7867141U8067141U8167141U8267141U8367141U8467141U856
With Built-In Thermostat
WaterCopper Sheath, 304SS Fitting 50 W/Sq. In.
1 and 2 element designs available. Consult factory.Please specify volts, phase, terminal box rating and, if needed, thermostat range from options listed on page 17.*UL Listing is available with thermostat built-in NEMA 1 Box only. For all other terminal box options, use 714N designation.
Number of
Elements
120V
KW
Availability1 Phase 3 PhaseB
Dimensions(Inches)
CatalogNumber
208V
240V
480V
208V
240V
480V
•••
••••••••
•••••••••
••••••••••••
•••••••••••
••••••••••••
•••••••••••••
•••
••••••••
•••••••••
••••••••••••
•••••••••••
••••••••••••
•••••••••••••
3
34
4.5567
7.589
1012151820
810-1/411-1/212-1/214-3/4
1718
19-1/421-1/223-3/428-1/4
3541-1/2
46
9-1/411-1/212-1/413-3/415-3/4
1819-1/420-1/422-1/224-3/4
2936
42-3/447-1/4
7141U4317141U2917141U4517141U3017141U4717141U3117141U4917141U3217141U5117141U3317141U3417141U3517141U3617141U371
Without Thermostat
120V
Availability1 Phase 3 PhaseB
Dimensions(Inches)
CatalogNumber*
208V
240V
480V
208V
240V
480V
With Built-In Thermostat
Water304 SS Sheath, 304 SS Fitting 50 W/Sq. In.
Without Thermostat, NEMA 1 Terminal Box
Without Thermostat, NEMA 1 Terminal Box
With Built-In Thermostat, NEMA 1 Terminal Box
With Built-In Thermostat, NEMA 1 Terminal Box
7141U3817141U3917141U4017141U4117141U4217141U4417141U4617141U4817141U5017141U5217141U5317141U5417141U5517141U561
800-243-8162www.indeeco.com17
Pipe Thread Heaters
Heater OptionsLiquidproof NEMA 4 Outlet Box (Without Built-In Thermostat) - Cast box with threaded, gasketed cover and 1” NPT female threaded hubs for electrical connections. For applications where there is danger of moisture entering the outlet box.
Explosion Resistant Heater - Rated for Class I, Div. I, Groups B, C & D. Applications are available, see page 32.
Liquidproof NEMA 4 Outlet Box (With Built-In Thermostat) - Welded steel outlet box with enamel finish and gasketed cover. Pilot light is visible through lens cover. Two 1” NPT hubs provided for electrical connections. Stainless steel outlet box is available as an option.
Single-Pole, Single-Throw Thermostats - Standard on all single-phase heaters and all pilot duty applications. See Page 47 for selection criteria. If pilot light or an ON/OFF switch is required, specify double-pole single- throw thermostat.
Omit Outlet Box - For applications where heater terminals will be protected by field-furnished enclosures.
Special Sheath Materials - Incoloy 800, Inconel 600, Type 316 stainless steel and Monel 400 available.
Special Header Materials - Incoloy 800, Inconel 600 and Type 316 stainless steel headers available.
Vertical Mounting for 1-1/4”, 2”, and 2-1/2” Pipe Thread Heaters with Thermostat - Thermostat must be mounted ver-tically. Heaters with single-pole, single-throw thermostats can be mounted in any position without relocating the box.
Other Special Ratings - 2 & 2-1/2” NPT pipe thread heaters available in any non stock voltage up to 600 volts. All sizes available with lower watt densities for special applications.
Longer Elements - Consult factory for length and wattage limits per element.
UL/CSA Approval - Available on all standard heaters listed.
Longer Element Cold Ends - Cold ends are 3/4” for copper, or 1-5/16” for stainless and steel. In vertically mounted heaters and other applications where the liquid will not completely cover the elements, immer-sion length should be increased by the length of additional cold end.
2-1/2” Pipe Thread Heaters
OilSteel Sheath, Steel Fitting 20 W/Sq. In.
1 and 2 element designs available. Consult factory.Please specify volts, phase, terminal box rating and, if needed, thermostat range from options listed on this page.*UL Listing is available with thermostat built-in NEMA 1 Box only. For all other terminal box options, use 714N designation.
Number of
Elements
120V
KW
Availability1 Phase 3 PhaseB
Dimensions(Inches)
CatalogNumber
208V
240V
480V
208V
240V
480V
••••••
•••••••••
••••••••••
••••••••••
••••••••••••
••••••••••••
••••••••••
••••••
•••••••••
••••••••••
••••••••••
••••••••••••
••••••••••••
••••••••••
3
1.52
2.534
4.556
7.59
1012
9-3/412-7Ú1615-1/4
1823-5/826-1/229-1/4
3543-1/451-3/457-1/868-1/2
7141U0847141U0947141U1047141U3247141U1147141U3447141U1247141U3647141U3847141U4047141U1347141U144
Without Thermostat
120V
Availability1 Phase 3 PhaseB
Dimensions(Inches)
CatalogNumber*
208V
240V
480V
208V
240V
480V
9-3/412-7Ú1615-1/4
1823-5/826-1/229-1/4
3543-1/451-3/457-1/868-1/2
7141U1547141U1647141U1747141U1847141U1947141U2047141U2147141U2247141U2347141U2447141U2547141U264
With Built-In ThermostatWithout Thermostat, NEMA 1 Terminal Box With Built-In Thermostat, NEMA 1 Terminal Box