Page 1
PestPac Inventory Module Version 1.41.4
The Inventory Module allows you easily to track your inventory on hand, receive inventory from distributors,
transfer inventory among warehouses and technicians and project whether you have enough inventory on
hand for upcoming services. This document will detail both setup on the server and how to use the PestPac
Mobile Inventory program.
System Requirements
Server version 1.41.4 or higher
PestPac Inventory license
Approved handheld for use with PestPac Mobile Inventory (if using the PestPac Mobile Inventory pro-
gram). A list of approved devices can be found here.
Setup Steps
Company Setup configuration (Server side)
Download the 3 of 9 barcode font (Server side)
Lookup Table configuration (Server side)
Please note that some of the setup steps for the server will be repeated in the PestPac Mobile Inventory sec-
tion of this document.
It is recommended that you turn the Inventory Module on in the Company Setup after
hours. Turning it on will cause the Services dropdown not to work on certain screens such
as the Service Setup and Service Order screen until the setup steps outlined for the server
setup are completed.
Page 2
Company Setup
To turn the Inventory Module on, in the Company Setup select Inventory. Check the Use Inventory check-
box. If you’d like to keep track of your material cost, check the Use Costing checkbox. The Inventory module
uses the FIFO (first in first out) method of accounting. Please note that if you turn on costing, you must enter
prices for each transaction on the handheld if using the PestPac Mobile Inventory program.
Download Add-Ons
From the Company Menu, select Download Add-Ons. Click on the blue link for the Bar Code Font to install it.
This option will enable you to print barcodes for Distributors, Warehouses, Technicians, Materials, Units of
Measure and Quantities that can be scanned for use with the PestPac Mobile Inventory program.
Page 3
Lookup Tables
From the Company Menu, select Lookup Tables. Several Lookup Tables must be populated in order to use
the Inventory Module.
Units of Measure Lookup Table
For each Unit of Measure that you wish to track in Inventory, you must check the “Track in Inventory” box in that Unit of Measure’s lookup. If you wish to track Material usage on Service Setups and Service Orders, check the “Track on Setups & Orders” checkbox.. (This is recommended for accurate Material tracking). On the Receive, Transfer and Reconcile (Warehouse only) screens, the UOM that is defaulted is the Warehouse UOM.
Materials Lookup Table
Several steps need to be completed in the Materials Lookup Table in order for them to be tracked correctly
using the Inventory Module.
Check the “Track in Inventory” checkbox for every material you want to track using the Inventory Mod-
ule.
Click on the blue UOM & Conversions link to bring up a pop up where you can enter in conversions for
different UOMs.
Undiluted UOM: This is the UOM that is used to determine how much undiluted material goes into
water. Make sure to enter this correctly the first time as it cannot be edited later.
Tech Base UOM: This is the UOM that is used when Material is distributed to a Technician. For
example, If you distribute an entire Gallon of undiluted material to the technician, you would use
your UOM for Gallon in this field.
Warehouse Base UOM: This is the UOM that is used when Material is received from a Distributor.
For example, if you buy Material in Cases, you would enter the UOM for Case in this field.
Entering Conversions: For each UOM that may be related to the Material you’re entering, enter
the conversions from that UOM to the Undiluted UOM listed in the pop up. In the example on the
next page, the Undiluted UOM is FO (Fluid Ounce) so you would enter 128 when converting from
Gallons to Fluid Ounces. Make sure to click on Save when finished.
Page 4
Track on Setups & Orders: Check this box if you’d like to track this Material on Service Setups and Service
Orders (including projected Setups and Orders. Projected Setups and Orders can be viewed if the
“Include Projected Setups” option is selected under the Appointment Scheduler section of the Additional
Features section of the Company Setup).
Access Rights Lookup Table
There are several Access Rights dealing with Inventory under
the Branch Access Rights. Select the Access Rights that you
want each person using Inventory to have. A detailed expla-
nation of each Access Right is detailed in the Access Tem-
plates Lookup Table help file.
Page 5
Inventory Distributors Lookup Table
The Inventory Distributors Lookup Table allows you to enter companies that you purchase Materials from.
You should add each company that you use to this lookup table. You must at least enter a Distributor Name
when adding a new Inventory Distributor. It is recommended that all fields on the Lookup Table are filled
out for ease of finding contact information for each Distributor in the future. Click on Save to save the new
Distributor.
Inventory Warehouses Lookup Table
The Inventory Warehouses Lookup Table allows you to enter locations where you company stores its Materi-
als. You must enter all locations in this Lookup Table so that you can accurately track how much Inventory
you have at each location.
Enter in at least a Warehouse Name for each Warehouse. At the bottom of the screen, select which
Branch(es) this Warehouse supplies. To select multiple Branches, press the CTRL key on the keyboard and
click on the different Branches. Click on Add when finished.
Page 6
Employees Lookup Table
In each Employee’s Lookup Table who will
be receiving Inventory (usually technicians),
select a Default Inventory Warehouse for
them. This field can be found in the Basic Information section of the Employees Lookup Table.
Using the Inventory Module
Inventory Main Menu
The Inventory Main
Menu can be found un-
der the Tools
dropdown. Each of the
options allows the user
to perform the follow-
ing:
Manage Inventory:
Allows the user to Receive and Transfer Materials between Distributors, Warehouses and Technicians.
Reconcile Inventory: Allows the user to enter in actual numbers for inventory amounts that are taken
from a physical inventory. Amounts entered in this screen will overwrite whatever the Material amount
is on the server for the Warehouse or Technician you are reconciling.
Import Transactions: Allows the user to import Inventory Transactions from a flat (text) file into PestPac.
Print Barcodes: Allows the user to print barcodes that correspond with Materials, Technicians, Distribu-
tors, Warehouses, UOMs and Amounts in your system. They can be scanned if using the PestPac Mobile
Inventory program.
Inventory on Hand Report: Allows the user to run a report that shows how much Material is currently
recorded in the Inventory Module for Warehouses and Technicians.
Projected Inventory Usage Report: Allows the user to run a report that shows how much material the
program anticipates you will need for scheduled orders and setups. Please note that you must have Ma-
terials on the setups or orders in order to use this report.
Reconciliation/Variance Report: Allows the user to run a report where a snapshot of what materials have
been changed using the Reconcile Inventory function and the cost of those Materials. This may be espe-
cially helpful in finding technicians that are under/over reporting how much Material is being used.
Transfer History Report: Allows the user to run a report that shows what Materials were moved between
Distributors, Warehouses and Technicians.
Cost vs. Production Report: Allows the user to run a report that will display a comparison between post-
ed Inventory costs versus production cost. This will enable to user to determine how much profit is being
made per service.
Page 7
Manage Inventory
The Manage Inventory screen allows you to receive Inventory from Distributors and transfer them between
your Inventory Warehouses and Technicians.
First select either a Distributor, Warehouse or Technician on the From line.
Select either a Distributor, Warehouse of Technician on the To line.
The boxes underneath will populate with choices for either Distributor, Warehouse or Technician de-
pending upon your From and To choices. The From is the left box and the To is the right box.
Click on the specific From and To options in the boxes.
The Transaction Date will default to today’s date.
On the Material line, select the Material and enter the Quantity, UOM and Cost of the material (if using
costing) then click on the gold Transfer button.
All transactions completed while in this screen will display under Recently Transferred Materials.
Page 8
Reconcile Inventory
The Reconcile Inventory screen allows the user to enter in actual amounts of Material based on a physical
inventory. It is suggested that you perform a physical inventory regularly to keep your Material Amounts
and costs accurate.
Select to reconcile either a Warehouse or Technician by clicking on the corresponding button on the
Reconcile line.
Select the specific Warehouse or Technician that you want to reconcile from the dropdown.
Enter the physical inventory amount in the New Qty field for each Material you are reconciling. If a cost
was entered when receiving the Material, it will be automatically populated. Click on Save when fin-
ished.
Import Transactions
You can import transactions by using a flat (text) file. Select if the Material is coming from a Distributor or
Warehouse and whether it is going to a Distributor or Warehouse. In the boxes below, select the From and
To Distributor/Warehouse. The transaction date will default to today’s date. Use the Browse option to se-
lect the file you want to import. Use the file format noted on the bottom of the screen. Make sure to enter
UOM and Material codes exactly as they appear in the lookups.
Page 9
Print Barcodes
The print barcodes function allows
the user to print barcodes that cor-
respond with codes stored in your
Lookup Tables to be used in con-
junction with PestPac Mobile Inven-
tory. Under Data to Print, select
whether you want to print barcodes
for Technicians, Warehouses, Dis-
tributors, Materials, Units of Meas-
ure and/or Quantities. You can se-
lect to print them on plain paper or select a label format. Click on the gold Print button to print the barcodes.
This concludes the Server portion of this document. The PestPac Mobile Inventory Guide
will appear next in the document.
Page 10
PestPac Mobile Inventory Version 1.41.4
PestPac Mobile Inventory integrates with the Inventory Module within PestPac. It allows the user to enter
Inventory Transactions on the Handheld and sync those transactions to the server. You can download
PestPac Mobile Inventory from the component download site here.
System Requirements
Server version 1.41.4 or higher
PestPac Mobile Inventory license
Approved handheld for use with PestPac Mobile Inventory. A list of approved devices can be found here.
Setup Steps
Company Setup configuration (Server side)
Lookup Table configuration (Server side)
Company Setup
In the Company Setup under Additional Modules, click on Inventory. You must check the Use Inventory checkbox in order to turn Inventory on. Check the Use Costing option if you’d like to track the cost of ma-terials you use and materials on handheld. This uses the FIFO method (first in first out) of calculating the cost. If Use Costing is selected in the Company Setup under PestPac Mobile Inventory, then the Price field on all screens where an amount can be entered will be required.
Page 11
Lookup Tables
There are several Lookup Tables that must be populated prior to using the Inventory Module for the first
time. This section will go over which ones and how to populate them correctly.
Unit of Measure Lookup Table
For each Unit of Measure that you wish to track in Inventory, you must check the “Track in Inventory” box in that Unit of Measure’s lookup. If you wish to track Material usage on Service Setups and Service Or-ders, check the “Track on Setups & Orders” checkbox.. (This is recommended for accurate Material track-ing). On the Receive, Transfer and Reconcile (Warehouse only) screens, the UOM that is defaulted is the Warehouse UOM.
Materials Lookup Table
Several steps need to be completed in the Materials Lookup Table in order for them to be tracked correctly
using the Inventory Module.
Check the “Track in Inventory” checkbox for every material you want to track using the Inventory Mod-
ule.
Click on the blue UOM & Conversions link to bring up a pop up where you can enter in conversions for
different UOMs.
Undiluted UOM: This is the UOM that is used to determine how much undiluted material goes into
water. Make sure to enter this correctly the first time as it cannot be edited later.
Tech Base UOM: This is the UOM that is used when Material is distributed to a Technician. For ex-
ample, If you distribute an entire Gallon of undiluted material to the technician, you would use your
UOM for Gallon in this field.
Warehouse Base UOM: This is the UOM that is used when Material is received from a Distributor.
For example, if you buy Material in Cases, you would enter the UOM for Case in this field.
Entering Conversions: For each UOM that may be related to the Material you’re entering, enter the
conversions from that UOM to the Undiluted UOM listed in the pop up. In the example on the next
page, the Undiluted UOM is FO (Fluid Ounce) so you would enter 128 when converting from Gallons
to Fluid Ounces. Make sure to click on Save when finished.
Page 12
Track on Setups & Orders: Check this box if you’d like to track this Material on Service Setups and Service
Orders (including projected Setups and Orders. Projected Setups and Orders can be viewed if the
“Include Projected Setups” option is selected under the Appointment Scheduler section of the Additional
Features section of the Company Setup).
Inventory Distributors Lookup Table
The Inventory Distributors Lookup Table allows you to enter companies that you purchase Materials from.
You should add each company that you use to this lookup table. You must at least enter a Distributor Name
when adding a new Inventory Distributor. It is recommended that all fields on the Lookup Table are filled
out for ease of finding contact information for each Distributor in the future. Click on Save to save the new
Distributor.
Page 13
Inventory Warehouses Lookup Table
The Inventory Warehouses Lookup Table allows you to enter locations where you company stores its Materi-
als. You must enter all locations in this Lookup Table so that you can accurately track how much Inventory
you have at each location.
Enter in at least a Warehouse Name for each Warehouse. At the bottom of the screen, select which
Branch(es) this Warehouse supplies. To select multiple Branches, press the CTRL key on the keyboard and
click on the different Branches. Click on Add when finished.
Using PestPac Mobile Inventory
After the setup steps are complete, you may begin using PestPac Mobile Inventory on the handheld.
Enter in your Company Key, Username and Password (if
applicable). Enter your server address in the Server Ad-
dress field. Please note that this information is the same
login for PestPac Mobile. See below for your PestPac
Mobile Inventory server address:
If using www.mypestpac.com online use:
http://sync.mypestpac.com
If using www10.mypestpac.com online use:
http://sync2.mypestpac.com
If hosting PestPac on your own server:
Please contact your IT Manager for your IP.
Page 14
PestPac Mobile Inventory Main Menu
Receive: From Distributor to Warehouse
Distribute: From Warehouse to Technician
Transactions: Listing of transactions currently not uploaded to
the server
Transfer: From Warehouse to Warehouse
Reclaim: From Technician to Warehouse
Reconcile: Update inventory amounts when a physical invento-
ry is taken
Upload Activity: Allows the user to upload transactions on the
handheld to the server
Exit: Exit the Main Menu to the Login Screen
Receive Screen: Distributor—>Warehouse
You c an either select the Distributor, Warehouse, Material,
Quantity and UOM via the dropdown or by scanning.
If “Use Costing” is selected in the Company Setup, you must
enter a price in the Price field.
Use the Each/Total buttons to either enter the cost of each Unit
or the total cost for the Material you are Receiving.
Tap on Save when finished.
You many then scan or select different options for the next Ma-
terial you are receiving.
Page 15
Distribute Screen: Warehouse—>Technician
You can either select the Warehouse, Technician, Material,
Quantity and UOM via the dropdown or by scanning.
If “Use Costing” is selected in the Company Setup, the Price
field will be available, but is not required..
Use the Each/Total buttons to either enter the cost of each Unit
or the total cost for the Material you are Receiving.
Tap on Save when finished.
You many then scan or select different options for the next
Material you are distributing.
Transactions Screen
This screen shows the list of transactions that are currently on
the handheld that have not yet been uploaded to the server.
Use the + sign to expand the tree and - to contract the tree.
If “Use Costing” is selected in the Company Setup, it will also be
listed on this screen.
Page 16
Reclaim Screen: Technician—>Warehouse
You c an either select the Technician, Warehouse, Material,
Quantity and UOM via the dropdown or by scanning.
If “Use Costing” is selected in the Company Setup, the Price
field will be available, but is not required..
Use the Each/Total buttons to either enter the cost of each Unit
or the total cost for the Material you are Receiving.
Tap on Save when finished.
You many then scan or select different options for the next Ma-
terial you are reclaiming.
Transfer Screen: Warehouse—>Warehouse
You c an either select the Warehouse, Material, Quantity and
UOM via the dropdown or by scanning.
If “Use Costing” is selected in the Company Setup, the Price
field will be available, but is not required..
Use the Each/Total buttons to either enter the cost of each Unit
or the total cost for the Material you are Receiving.
Tap on Save when finished.
You many then scan or select different options for the next Ma-
terial you are transferring.
Page 17
Reconcile Screen
Use this screen to enter in Material amounts when a physical in-
ventory is taken. The amount entered on the handheld on this
screen will overwrite the amount on the server.
You c an either select the Technician, Warehouse, Material,
Quantity and UOM via the dropdown or by scanning.
Use the Each/Total buttons to either enter the cost of each Unit
or the total cost for the Material you are Receiving. Tap on
Save when finished.
You many then scan or select different options for the next Ma-
terial you are reconciling.
Page 18
This concludes the PestPac Mobile Inventory training.
If you need additional
information, please use our support form here or con-
tact our support team at 800.762.0301