Paper Mache Masks
Paper Mache Masks
• You will be constructing and designing your own mask using the generic mask form given to you.
• We are working on the form element of art in this project.
• You might decide to create a sugar skull mask, a movie character, or something totally original.
The Process
The Process
• You will received a plastic mask form.
• To prevent the paper mache from sticking to the mask (when we need to pull it off later), we will put a sheet of foil on as our first "layer".
The Process
• You will use a simple mix of glue and water as paste, newspaper and paper towel to create the mask layers, and a brush to lay the paste.
The Process
• You will apply a layer of newspaper first.
• Then you will apply a layer of paper towel.
• You will alternate between newspaper and paper towel for a total of 6 layers.
• The paper towel will be your last layer.
The Process
• After the last layer is dry, you will paint on a layer or two of white gesso. This creates a nice blank canvas.
• Remove the mask from the plastic form and you are ready to decorate. You can use acrylic paint for this. Markers will work on small detail areas.
• Feel free to add embellishments like jewels, sequins, and feathers to make your mask unique.
Sugar SkullCreated with a fine tipped sharpie after laying out the design lightly with pencil first.
The Process
• This student found a design online to replicate on her mask.
Mask Criteria
Construction:
• The paper mache portion was done neatly and patiently.
• The mask is sturdy and well made.
Craftmanship:
• The mask is neat and attention to detail is evident.
• Touch-ups are not needed.
• The mask is and looks finished.
Mask Criteria
Creativity
• Interesting and creative design.
• Shows individual style.
Effort
• Gave 100% on this project or went above and beyond.
• A lot of time and hard work was put into this.
• Extra design elements were added.