Download - P01201_TDS_Humboldt ABG_R0_DT 11.11.10
Flakt Reference P01201-G01-Rev0-Dt 11/11/2010
Supplier Flakt (I) Ltd Flakt (I) Ltd
Quantity 1 1
Customer M/s Humboldt A/c ABG M/s Humboldt A/c ABG
A Application Preheater Fan - RajShree Preheater Fan - Rawan
1 Fan Type FK TD 308 3TD8A FK TD 308 3TD8A
2 Description New Fan In New Foundation New Fan In New Foundation
3 DUTY PARAMETERS DUTY PARAMETERS
Design Operating 1 Operating 2 Design Operating 1 Operating 2
4 Volume Handled (m3/hr) 875000 655200 605102 875000 655200 605102
5 Volume Handled (m3/s) 243.06 182.00 168.08 243.06 182.00 168.08
6 Fan Static Pressure at inlet (mbar) -80 -46 -66 -80 -46 -66
7 Fan Static Pressure at outlet (mbar) 0 0 0 0 0 0
8 Fan differencial static pressure (mbar) 80 46 66 80 46 66
9 Mechanical Design temp (Deg C) 400 400
9a Peak Temperature (Deg C) 450 for 2% of continous operation 450 for 2% of continous operation
10 Inlet temp (Deg C) 285 260 160 285 260 160
10a Site elevation (m) 445 (Rajshree) 270(Rawan)
11 Dust load (g/m3) 30 25 25 30 25 25
12 Inlet Density (Kg/Nm3) 1.431 1.431 1.431 1.431 1.431 1.431
13 Fan Static Eff (%) without dust 83 82 83 83 82 83
14 Fan Static Eff (%) with dust 79 79 81 79 79 81
15 Power at shaft (Kw) without dust 2335 1022 1329 2339 1024 1329
16 Power at shaft (Kw) with dust 2447 1060 1369 2448 1061 1369
17 ~2720 ~2720
18 Nominal Speed of Fan(rpm) 990 731 765 990 724 757
19 Critical Speed of fan (rpm) ~1435 ~1435
20 No of gas entry duct 2 2
21 GD2 (kg.m2) ~25610 ~25610
22 Full load torque Please Refer Sp vs Tq Curve Please Refer Sp vs Tq Curve
23 Starting torque Please Refer Sp vs Tq Curve Please Refer Sp vs Tq Curve
B
1 Impeller
2 Impeller Dia (mm) 3080 3080
3 Impeller Material (B / D / S) S 690 QL - EQ S 690 QL - EQ
4 Type of blade Back ward curved type Back ward curved type
Power of drive motor @ 10% margin on shaft power (KW)
5 Thk of blade (B / D / S) (mm) 16 / (25+35) / 15 16 / (25+35) / 15
6 Liners / Hardfacing 100% area of blade & wear prone area of disc 100% area of blade & wear prone area of disc
7 Thickness of liner for blade (mm) 5 5
8 Hard Facing material / thick Chromium Carbide Chromium Carbide
9 Pheripheral speed (m/sec) 160 160
C
1 Shaft
2 490 490
3 200 200
4 Material 25CD4 - eq 25CD4 - eq
D
Fan Housing
1 Side plate thk / Material (mm) IS 2062 Gr A / 10 IS 2062 Gr A / 10
2 Scroll plate thk / Material (mm) IS 2062 Gr A / 8 IS 2062 Gr A / 8
3 Material Of Wear Liners Not Applicable Not Applicable
4 Thickness of Side plate wear Liner(mm) Not Applicable Not Applicable
5 Thickness of scroll wear liner(mm) Not Applicable Not Applicable
E
Bearing
1 Bearing designation 22240 cc/w33-c3 22240 cc/w33-c3
2 Type of bearing Speherical Roller Speherical Roller
F
1 Coupling
4 Type Flexible Coupling Flexible Coupling
G
1 Fan Weight (Kg) ~40400 ~40400
2 Rotor Weight (Kg) ~13000 ~13000
I Noise level at 1 meter distance <= 85 dbA with insulation <= 85 dbA with insulation
Note:
1 Fan performance test are subjected to class A tolerance as per BS848 Part I- 1980 standard.
2 The regulation of flow, below 30% of the flow with full opening,can generate vibrations
3
Shaft Dia @ impeller (mm)
Shaft Dia @ bearing (mm)
Technical specification Furnished Above are Tentative or subject to change during detailed Engineering with respect to Change in INLET Box Orientation
Flakt Reference P01201-G01-Rev0-Dt 11/11/2010
Supplier Flakt (I) Ltd Flakt (I) Ltd
Quantity 1 1
Customer M/s Humboldt A/c ABG M/s Humboldt A/c ABG
A Application Baghouse Fan - RajShree Baghouse Fan - Rawan
1 Fan Type DX TD 289 3TD8A DX TD 289 3TD8A
2 Description New Fan In New Foundation New Fan In New Foundation
3 DUTY PARAMETERS DUTY PARAMETERS
Design Operating 1 Operating 2 Design Operating 1 Operating 2
4 Volume Handled (m3/hr) 1025000 804000 760000 1025000 804000 760000
5 Volume Handled (m3/s) 284.72 223.33 211.11 284.72 223.33 211.11
6 Fan Static Pressure at inlet (mbar) -35 -25 -25 -35 -25 -25
7 Fan Static Pressure at outlet (mbar) 0 0 0 0 0 0
8 Fan differencial static pressure (mbar) 35 25 25 35 25 25
9 Mechanical Design temp (Deg C) 350 350
9a Peak Temperature (Deg C) NA NA
10 Inlet temp (Deg C) 240 90 240 240 90 240
10a Site elevation (m) 445(Rajshree) 270(Rawan)
11 Dust load (g/m3) 0.02 0.02 0.02 0.02 0.02 0.02
12 Inlet Density (Kg/m3) 0.72 0.94 0.72 0.72 0.94 0.72
13 Fan Static Eff (%) without dust 83 82 85 83 82 85
14 Fan Static Eff (%) with dust 83 82 85 83 82 85
15 Power at shaft (Kw) without dust 1194 684 618 1195 685 618
16 Power at shaft (Kw) with dust 1194 684 618 1195 685 618
17 ~1315 ~1315
18 Nominal Speed of Fan(rpm) 740 563 596 740 563 596
19 Critical Speed of fan (rpm) ~1080 ~1080
20 No of gas entry duct 2 2
21 GD2 (kg.m2) ~20020 ~20020
22 Full load torque Please Refer Sp vs Tq Curve Please Refer Sp vs Tq Curve
23 Starting torque Please Refer Sp vs Tq Curve Please Refer Sp vs Tq Curve
B
1 Impeller
2 Impeller Dia (mm) 2890 2890
3 Impeller Material (B / D / S) S 690 QL - EQ S 690 QL - EQ
4 Type of blade Aerofoil Back ward curved type Aerofoil Back ward curved type
Power of drive motor @ 10% margin on shaft power (KW)
5 Thk of blade (B / D / S) (mm) 6/20/`10 6/20/`10
6 Liners / Hardfacing 25% area of blade & wear prone area of disc 25% area of blade & wear prone area of disc
7 Thickness of liner for blade (mm) 5 5
8 Hard Facing material / thick Chromium Carbide Chromium Carbide
9 Pheripheral speed (m/sec) 112 112
C
1 Shaft
2 540 540
3 200 200
4 Material EN 8 - eq EN 8 - eq
D
Fan Housing
1 Side plate thk / Material (mm) IS 2062 Gr A / 10 IS 2062 Gr A / 10
2 Scroll plate thk / Material (mm) IS 2062 Gr A / 8 IS 2062 Gr A / 8
3 Material Of Wear Liners Not Applicable Not Applicable
4 Thickness of Side plate wear Liner(mm) Not Applicable Not Applicable
5 Thickness of scroll wear liner(mm) Not Applicable Not Applicable
E
Bearing
1 Bearing designation 22240 cc/w33-c3 22240 cc/w33-c3
2 Type of bearing Speherical Roller Speherical Roller
F
1 Coupling
4 Type Flexible Coupling Flexible Coupling
G
1 Fan Weight (Kg) ~46800 ~46800
2 Rotor Weight (Kg) ~15100 ~15100
I Noise level at 1 meter distance <= 85 dbA with insulation <= 85 dbA with insulation
Note:
1 Fan performance test are subjected to class A tolerance as per BS848 Part I- 1980 standard.
2 The regulation of flow, below 30% of the flow with full opening,can generate vibrations
3
Shaft Dia @ impeller (mm)
Shaft Dia @ bearing (mm)
Technical specification Furnished Above are Tentative or subject to change during detailed Engineering with respect to Change in INLET Box Orientation
Flakt Reference P01201-G01-Rev0-Dt 11/11/2010
Supplier Flakt (I) Ltd Flakt (I) Ltd
Quantity 1 1
Customer M/s Humboldt A/c ABG M/s Humboldt A/c ABG
A Application Cooler ESP Fan - RajShree Cooler ESP Fan - Rawan
1 Fan Type DY TD 321 3TD8A DY TD 321 3TD8A
2 Description New Fan In New Foundation New Fan In New Foundation
3 DUTY PARAMETERS DUTY PARAMETERS
Design Operating 1 Operating 2 Design Operating 1 Operating 2
4 Volume Handled (m3/hr) 1500000 1107365 881273 1500000 1107365 881273
5 Volume Handled (m3/s) 416.67 307.60 244.80 416.67 307.60 244.80
6 Fan Static Pressure at inlet (mbar) -18 -8 -15 -18 -8 -15
7 Fan Static Pressure at outlet (mbar) 0 0 0 0 0 0
8 Fan differencial static pressure (mbar) 18 8 15 18 8 15
9 Mechanical Design temp (Deg C) 385 385
9a Peak Temperature (Deg C) 400 for 2% of continous operation 400 for 2% of continous operation
10 Inlet temp (Deg C) 350 280 120 350 280 120
10a Site elevation (m) 445(Rajshree) 270(Rawan)
11 Dust load (g/m3) 0.02 0.02 0.02 0.02 0.02 0.02
12 Inlet Density (Kg/Nm3) 1.293 1.293 1.293 1.293 1.293 1.293
13 Fan Static Eff (%) without dust 84 78 87 83 77 87
14 Fan Static Eff (%) with dust 84 78 87 83 77 87
15 Power at shaft (Kw) without dust 896 317 424 899 319 424
16 Power at shaft (Kw) with dust 896 317 424 899 319 424
17 ~1000 ~1000
18 Nominal Speed of Fan(rpm) 590 404 395 588 403 393
19 Critical Speed of fan (rpm) ~855 ~855
20 No of gas entry duct 2 2
21 GD2 (kg.m2) ~34180 ~34180
22 Full load torque Please Refer Sp vs Tq Curve Please Refer Sp vs Tq Curve
23 Starting torque Please Refer Sp vs Tq Curve Please Refer Sp vs Tq Curve
B
1 Impeller
2 Impeller Dia (mm) 3210 3210
3 Impeller Material (B / D / S) S 690 QL - EQ S 690 QL - EQ
4 Type of blade Aerofoil Back ward curved type Aerofoil Back ward curved type
5 Thk of blade (B / D / S) (mm) 6/20/`10 6/20/`10
6 Liners / Hardfacing 25% area of blade & wear prone area of disc 25% area of blade & wear prone area of disc
7 Thickness of liner for blade (mm) 5 5
8 Hard Facing material / thick Chromium Carbide Chromium Carbide
9 Pheripheral speed (m/sec) 99 99
C
1 Shaft
2 550 550
3 200 200
4 Material 25CD4 - eq 25CD4 - eq
D
Fan Housing
1 Side plate thk / Material (mm) IS 2062 Gr A / 10 IS 2062 Gr A / 10
2 Scroll plate thk / Material (mm) IS 2062 Gr A / 8 IS 2062 Gr A / 8
3 Material Of Wear Liners Not Applicable Not Applicable
4 Thickness of Side plate wear Liner(mm) Not Applicable Not Applicable
5 Thickness of scroll wear liner(mm) Not Applicable Not Applicable
E
Bearing
1 Bearing designation 22240 cc/w33-c3 22240 cc/w33-c3
2 Type of bearing Speherical Roller Speherical Roller
F
1 Coupling
4 Type Flexible Coupling Flexible Coupling
G
1 Fan Weight (Kg) ~67100 ~67100
2 Rotor Weight (Kg) ~18400 ~18400
Power of drive motor @ 10% margin on shaft power (KW)
Shaft Dia @ impeller (mm)
Shaft Dia @ bearing (mm)
I Noise level at 1 meter distance <= 85 dbA with insulation <= 85 dbA with insulation
Note:
1 Fan performance test are subjected to class A tolerance as per BS848 Part I- 1980 standard.
2 The regulation of flow, below 30% of the flow with full opening,can generate vibrations
3 Technical specification Furnished Above are Tentative or subject to change during detailed Engineering with respect to Change in INLET Box Orientation
Flakt Reference P01201-G01-Rev0-Dt 11/11/2010
Supplier Flakt (I) Ltd Flakt (I) Ltd
Quantity 1 1
Customer M/s Humboldt A/c ABG M/s Humboldt A/c ABG
A Application Seperator Fan (Raw Grinding) - RajShree Seperator Fan (Raw Grinding) - Rawan
1 Fan Type FL TD 229 3TD8A FL TD 229 3TD8A
2 Description New Fan In New Foundation New Fan In New Foundation
3 DUTY PARAMETERS DUTY PARAMETERS
Design Operating 1 Design Operating 1
4 Volume Handled (m3/hr) 470000 448430 470000 448430
5 Volume Handled (m3/s) 130.56 124.56 130.56 124.56
6 Fan Static Pressure at inlet (mbar) -65 -60 -65 -60
7 Fan Static Pressure at outlet (mbar) 0 0 0 0
8 Fan differencial static pressure (mbar) 65 60 65 60
9 Mechanical Design temp (Deg C) 150 150
9a Peak Temperature (Deg C) NA NA
10 Inlet temp (Deg C) 100 90 100 90
10a Site elevation (m) 445(Rajshree) 270(Rawan)
11 Dust load (g/m3) 80 60 80 60
12 Inlet Density (Kg/m3) 0.94 0.94 0.94 0.94
13 Fan Static Eff (%) without dust 84 84 84 84
14 Fan Static Eff (%) with dust 78 79 78 79
15 Power at shaft (Kw) without dust 1006 887 1008 888
16 Power at shaft (Kw) with dust 1090 942 1091 944
17 ~1200 ~1200
18 Nominal Speed of Fan(rpm) 990 950 995 955
19 Critical Speed of fan (rpm) ~1435 ~1435
20 No of gas entry duct 2 2
21 GD2 (kg.m2) ~7555 ~7555
22 Full load torque Please Refer Sp vs Tq Curve Please Refer Sp vs Tq Curve
23 Starting torque Please Refer Sp vs Tq Curve Please Refer Sp vs Tq Curve
B
1 Impeller
2 Impeller Dia (mm) 2290 2290
3 Impeller Material (B / D / S) S 355 J2 G3 - Eq S 355 J2 G3 - Eq
Power of drive motor @ 10% margin on shaft power (KW)
4 Type of blade Back ward curved type Back ward curved type
5 Thk of blade (B / D / S) (mm) (12+12)/ 20 / 10 (12+12)/ 20 / 10
6 Liners / Hardfacing 100% area of blade & wear prone area of disc 100% area of blade & wear prone area of disc
7 Thickness of liner for blade (mm) 5 5
8 Hard Facing material / thick Chromium Carbide Chromium Carbide
9 Pheripheral speed (m/sec) 119 119
C
1 Shaft
2 345 345
3 140 140
4 Material EN8 - eq EN8 - eq
D
Fan Housing
1 Side plate thk / Material (mm) IS 2062 Gr A / 8 IS 2062 Gr A / 8
2 Scroll plate thk / Material (mm) IS 2062 Gr A / 6 IS 2062 Gr A / 6
3 Material Of Wear Liners IS 2062 IS 2062
4 Thickness of Side plate wear Liner(mm) Not Applicable Not Applicable
5 Thickness of scroll wear liner(mm) 5 5
E
Bearing
1 Bearing designation 22228 cc/w33 22228 cc/w33
2 Type of bearing Speherical Roller Speherical Roller
F
1 Coupling
4 Type Flexible Coupling Flexible Coupling
G
1 Fan Weight (Kg) ~19900 ~19900
2 Rotor Weight (Kg) ~5700 ~5700
I Noise level at 1 meter distance <= 85 dbA with insulation <= 85 dbA with insulation
Note:
1 Fan performance test are subjected to class A tolerance as per BS848 Part I- 1980 standard.
2 The regulation of flow, below 30% of the flow with full opening,can generate vibrations
Shaft Dia @ impeller (mm)
Shaft Dia @ bearing (mm)
3 Technical specification Furnished Above are Tentative or subject to change during detailed Engineering with respect to Change in INLET Box Orientation
Flakt Reference P01201-G01-Rev0-Dt 11/11/2010
Supplier Flakt (I) Ltd
Quantity 1
Customer M/s Humboldt A/c ABG
A Application Seperator Fan (Coal Grinding) - RajShree
1 Fan Type FL TD 221 3TD8A
2 Description New Fan In New Foundation
3 DUTY PARAMETERS
Design Operating 1
4 Volume Handled (m3/hr) 424300 403085
5 Volume Handled (m3/s) 117.86 111.97
6 Fan Static Pressure at inlet (mbar) -60 -55
7 Fan Static Pressure at outlet (mbar) 0 0
8 Fan differencial static pressure (mbar) 60 55
9 Mechanical Design temp (Deg C) 150
9a Peak Temperature (Deg C) NA
10 Inlet temp (Deg C) 100 90
10a Site elevation (m) 445(Rajshree)
11 Dust load (g/m3) 80 70
12 Inlet Density (Kg/m3) 0.94 0.94
13 Fan Static Eff (%) without dust 84 84
14 Fan Static Eff (%) with dust 78 78
15 Power at shaft (Kw) without dust 842 733
16 Power at shaft (Kw) with dust 912 787
17 ~1005
18 Nominal Speed of Fan(rpm) 990 947
19 Critical Speed of fan (rpm) ~1435
20 No of gas entry duct 2
21 GD2 (kg.m2) ~6536
22 Full load torque Please Refer Sp vs Tq Curve
23 Starting torque Please Refer Sp vs Tq Curve
B
1 Impeller
2 Impeller Dia (mm) 2210
3 Impeller Material (B / D / S) S 355 J2 G3 - Eq
4 Type of blade Back ward curved type
5 Thk of blade (B / D / S) (mm) (12+12)/ 20 / 10
6 Liners / Hardfacing 100% area of blade & wear prone area of disc
7 Thickness of liner for blade (mm) 5
8 Hard Facing material / thick Chromium Carbide
9 Pheripheral speed (m/sec) 115
C
1 Shaft
Power of drive motor @ 10% margin on shaft power (KW)
2 330
3 130
4 Material EN8 - eq
D
Fan Housing
1 Side plate thk / Material (mm) IS 2062 Gr A / 8
2 Scroll plate thk / Material (mm) IS 2062 Gr A / 6
3 Material Of Wear Liners IS 2062
4 Thickness of Side plate wear Liner(mm) Not Applicable
5 Thickness of scroll wear liner(mm) 5
E
Bearing
1 Bearing designation 22226 e
2 Type of bearing Speherical Roller
F
1 Coupling
4 Type Flexible Coupling
G
1 Fan Weight (Kg) ~18500
2 Rotor Weight (Kg) ~5200
I Noise level at 1 meter distance <= 85 dbA with insulation
Note:
1 Fan performance test are subjected to class A tolerance as per BS848 Part I- 1980 standard.
2 The regulation of flow, below 30% of the flow with full opening,can generate vibrations
3
Shaft Dia @ impeller (mm)
Shaft Dia @ bearing (mm)
Technical specification Furnished Above are Tentative or subject to change during detailed Engineering with respect to Change in INLET Box Orientation
Annexure : Speed Vs.Torque Curve
M/s Humboldt A/c ABG
A OUR REF : P01201-G01-Rev0-Dt 11/11/2010
B APPLICATION : Preheater Fan - Rajshree / Rawan
C FAN TYPE : FK TD 308 3TD8A
D ~25610
E FAN SHAFT POWER 2448
F FAN ABSORBED POWER WITH DAMPER CLOSED AT 20°C (kW) 1215
G OPERATING SPEED OF FAN (RPM) 990
H TORQUE WITH DAMPER OPEN (kg.m) 2409
I TORQUE WITH DAMPER CLOSED (kg.m) 1195
SPEETORQ
GD2 VALUE OF ROTOR (kg.m2)
0 10 20 30 40 50 60 70 80 90 100 0.0000
10.0000
20.0000
30.0000
40.0000
50.0000
60.0000
70.0000
80.0000
90.0000
100.0000
FK TD 308 3TD8A
DAMPER OPENSPEED (%)
NO
MIN
AL T
OR
QU
E O
F F
AN
( %
)
Annexure : Speed Vs.Torque Curve
M/s Humboldt A/c ABG
A OUR REF : P01201-G01-Rev0-Dt 11/11/2010
B APPLICATION : BH Fan - Rajshree /Rawan
C FAN TYPE : DX TD 289 3TD8A
D 20020
E FAN SHAFT POWER 1195
F FAN ABSORBED POWER WITH DAMPER CLOSED AT 20°C (kW) 705
G OPERATING SPEED OF FAN (RPM) 740
H TORQUE WITH DAMPER OPEN (kg.m) 1573
I TORQUE WITH DAMPER CLOSED (kg.m) 928
SPEETORQ
GD2 VALUE OF ROTOR (kg.m2)
0 10 20 30 40 50 60 70 80 90 100 0.0000
10.0000
20.0000
30.0000
40.0000
50.0000
60.0000
70.0000
80.0000
90.0000
100.0000
DX TD 289 3TD8A
DAMPER OPENSPEED (%)
NO
MIN
AL T
OR
QU
E O
F F
AN
( %
)
Annexure : Speed Vs.Torque Curve
M/s Humboldt A/c ABG
A OUR REF : P01201-G01-Rev0-Dt 11/11/2010
B APPLICATION : ESP Fan - Rajshree /Rawan
C FAN TYPE : DY TD 321 3TD8A
D 34180
E FAN SHAFT POWER 899
F FAN ABSORBED POWER WITH DAMPER CLOSED AT 20°C (kW) 701
G OPERATING SPEED OF FAN (RPM) 590
H TORQUE WITH DAMPER OPEN (kg.m) 1484
I TORQUE WITH DAMPER CLOSED (kg.m) 1157
SPEETORQ
GD2 VALUE OF ROTOR (kg.m2)
0 10 20 30 40 50 60 70 80 90 100 0.0000
10.0000
20.0000
30.0000
40.0000
50.0000
60.0000
70.0000
80.0000
90.0000
100.0000
DY TD 321 3TD8A
DAMPER OPENSPEED (%)
NO
MIN
AL T
OR
QU
E O
F F
AN
( %
)
Annexure : Speed Vs.Torque Curve
M/s Humboldt A/c ABG
A OUR REF : P01201-G01-Rev0-Dt 11/11/2010
B APPLICATION : Seperator Fan - Rajshree / Rawan
C FAN TYPE : FL TD 229 3TD8A
D 7555
E FAN SHAFT POWER 1091
F FAN ABSORBED POWER WITH DAMPER CLOSED AT 20°C (kW) 362
G OPERATING SPEED OF FAN (RPM) 990
H TORQUE WITH DAMPER OPEN (kg.m) 1073
I TORQUE WITH DAMPER CLOSED (kg.m) 356
SPEETORQ
GD2 VALUE OF ROTOR (kg.m2)
0 10 20 30 40 50 60 70 80 90 100 0.0000
10.0000
20.0000
30.0000
40.0000
50.0000
60.0000
70.0000
80.0000
90.0000
100.0000
FL TD 229 3TD8A
DAMPER OPENSPEED (%)
NO
MIN
AL T
OR
QU
E O
F F
AN
( %
)
Annexure : Speed Vs.Torque Curve
M/s Humboldt A/c ABG
A OUR REF : P01201-G01-Rev0-Dt 11/11/2010
B APPLICATION : Seperator Fan - Rajshree / Rawan
C FAN TYPE : FL TD 221 3TD8A
D 6536
E FAN SHAFT POWER 912
F FAN ABSORBED POWER WITH DAMPER CLOSED AT 20°C (kW) 302
G OPERATING SPEED OF FAN (RPM) 990
H TORQUE WITH DAMPER OPEN (kg.m) 897
I TORQUE WITH DAMPER CLOSED (kg.m) 297
SPEETORQ
GD2 VALUE OF ROTOR (kg.m2)
0 10 20 30 40 50 60 70 80 90 100 0.0000
10.0000
20.0000
30.0000
40.0000
50.0000
60.0000
70.0000
80.0000
90.0000
100.0000
FL TD 221 3TD8A
DAMPER OPENSPEED (%)
NO
MIN
AL T
OR
QU
E O
F F
AN
( %
)
Annexure : Scope of SupplyCustomer M/s Humboldt A/c ABG
Fläkt Reference P01201-G01-Rev0-Dt 11/11/2010
Application ALL Fans
Fan Type -
Scope:Casing with inspection door & drain plug Yes
Inlet box with inspection door & drain plug Yes
Impeller Yes
Evase Yes
Hub Yes
Inlet Damper (FIL) HWI Scope
Electric Actuator (Auma Make) No
RTD Yes
Shaft Yes
Inlet Cone Yes
Bearings - SKF / Equivalent Yes
Yes
Bearing pedestals Yes
Soleplate For Fan & Motor Yes
Cooling disc with cover Yes
Shaft sealing arrangement (Brass plate) Yes
Actuator bracket and linkage Yes
Yes
Yes
Coupling guard Yes
Foundation bolts & fixing hardwares Yes
Bearing housing - Indeginious make, Masta/Mcroch/ make
Pin & Bush coupling, Fenner/Flender. Indeginous make
Vibration Sensors /Schenk Avery India(X-Y direction)/ Make