NATIONAL COUNCIL OF VOCATIONAL AND RESEARCH TRAINING (An Autonomous Body, Directorate of Vocational Education, Recognized By Government of India)
NEW DELHI-110058
CENTRAL BOARD OF EXAMINATION – MAY 2019 COURSE NAME CERTIFICATE IN WHEEL ALIGNMENT & BALANCING
DURATION THREE MONTHS
COURSE CODE AUT - 267
VOCATIONAL EXAMINATION TIME TABLE
DATE & DAY
PAPER & CODE
SUBJECT TIME
13.05.19 Monday
PAPER I C/140/AUT/I
BASICS OF WHEEL ALIGNMENT 10.00 am To 01.00 pm
14.05.19 Tuesday
PRACTICAL I 10.00 am
To 01.00 pm
DIRECTORATE OF VOCATIONAL EXAMINATION
Important Instructions for students appearing in above mentioned examinations: 1. All the students of all Zones are instructed to remain present at exam center as per the schedule time. 2. All the students are required to carry hall ticket with them issued by the VTC during exam time. 3. All students must be present in their respective examination hall 30 minutes before exam time
JANAKPURI NCVRT New Delhi – 110058 Controller of Examination
NATIONAL COUNCIL OF VOCATIONAL AND RESEARCH TRAINING (An Autonomous Body, Directorate of Vocational Education, Recognized By Government of India)
NEW DELHI-110058
CENTRAL BOARD OF EXAMINATION – MAY 2019 COURSE NAME CERTIFICATE IN REPAIR & OVERHAULING OF AUTO ELECTRICAL SYSTEM
DURATION THREE MONTHS
COURSE CODE AUT - 271
VOCATIONAL EXAMINATION TIME TABLE
DATE & DAY
PAPER & CODE
SUBJECT TIME
13.05.19 Monday
PAPER I C/141/AUT/I
AUTO ELECTRICAL SYSTEM 10.00 am To 01.00 pm
14.05.19 Tuesday
PRACTICAL I 10.00 am
To 01.00 pm
DIRECTORATE OF VOCATIONAL EXAMINATION
Important Instructions for students appearing in above mentioned examinations: 1. All the students of all Zones are instructed to remain present at exam center as per the schedule time. 2. All the students are required to carry hall ticket with them issued by the VTC during exam time. 3. All students must be present in their respective examination hall 30 minutes before exam time
JANAKPURI NCVRT New Delhi – 110058 Controller of Examination
NATIONAL COUNCIL OF VOCATIONAL AND RESEARCH TRAINING (An Autonomous Body, Directorate of Vocational Education, Recognized By Government of India)
NEW DELHI-110058
CENTRAL BOARD OF EXAMINATION – MAY 2019 COURSE NAME CERTIFICATE IN TWO WHEELER MECHANIC
DURATION SIX MONTHS
COURSE CODE AUT - 278
VOCATIONAL EXAMINATION TIME TABLE
DATE & DAY
PAPER & CODE
SUBJECT TIME
13.05.19 Monday
PAPER I C/142/AUT/I
TWO WHEELER MECHANISM 10.00 am To 01.00 pm
14.05.19 Tuesday
PAPER II C/143/AUT/II
DRAWING AND WORKSHOP CALCULATION 10.00 am To 01.00 pm
15.05.19 Wednesday
PRACTICAL I & II 10.00 am
To 04.00 pm
DIRECTORATE OF VOCATIONAL EXAMINATION
Important Instructions for students appearing in above mentioned examinations: 1. All the students of all Zones are instructed to remain present at exam center as per the schedule time. 2. All the students are required to carry hall ticket with them issued by the VTC during exam time. 3. All students must be present in their respective examination hall 30 minutes before exam time
JANAKPURI NCVRT New Delhi – 110058 Controller of Examination
NATIONAL COUNCIL OF VOCATIONAL AND RESEARCH TRAINING (An Autonomous Body, Directorate of Vocational Education, Recognized By Government of India)
NEW DELHI-110058
CENTRAL BOARD OF EXAMINATION – MAY 2019 COURSE NAME CERTIFICATE IN CAR A/C MECHANIC
DURATION SIX MONTHS
COURSE CODE AUT-281
VOCATIONAL EXAMINATION TIME TABLE
DATE & DAY
PAPER & CODE
SUBJECT TIME
13.05.19 Monday
PAPER I C/144/AUT/I
BASIC CAR A/C MECHANIC 10.00 am To 01.00 pm
14.05.19 Tuesday
PRACTICAL I 10.00 am
To 01.00 pm
DIRECTORATE OF VOCATIONAL EXAMINATION
Important Instructions for students appearing in above mentioned examinations: 1. All the students of all Zones are instructed to remain present at exam center as per the schedule time. 2. All the students are required to carry hall ticket with them issued by the VTC during exam time. 3. All students must be present in their respective examination hall 30 minutes before exam time
JANAKPURI NCVRT New Delhi – 110058 Controller of Examination
NATIONAL COUNCIL OF VOCATIONAL AND RESEARCH TRAINING (An Autonomous Body, Directorate of Vocational Education, Recognized By Government of India)
NEW DELHI-110058
CENTRAL BOARD OF EXAMINATION – MAY 2019 COURSE NAME CERTIFICATE IN GAS WELDER
DURATION SIX MONTHS
COURSE CODE AUT-287
VOCATIONAL EXAMINATION TIME TABLE
DATE & DAY
PAPER & CODE
SUBJECT TIME
13.05.19 Monday
PAPER I C/145/AUT/I
BASIC WELDING (GAS) 10.00 am To 01.00 pm
14.05.19 Tuesday
PRACTICAL I 10.00 am
To 01.00 pm
DIRECTORATE OF VOCATIONAL EXAMINATION
Important Instructions for students appearing in above mentioned examinations: 1. All the students of all Zones are instructed to remain present at exam center as per the schedule time. 2. All the students are required to carry hall ticket with them issued by the VTC during exam time. 3. All students must be present in their respective examination hall 30 minutes before exam time
JANAKPURI NCVRT New Delhi – 110058 Controller of Examination
NATIONAL COUNCIL OF VOCATIONAL AND RESEARCH TRAINING (An Autonomous Body, Directorate of Vocational Education, Recognized By Government of India)
NEW DELHI-110058
CENTRAL BOARD OF EXAMINATION – MAY 2019 COURSE NAME CERTIFICATE IN AUTO MOBILE ENGINEERING
DURATION ONE YEAR
COURSE CODE AUT-294
VOCATIONAL EXAMINATION TIME TABLE
DATE & DAY
PAPER & CODE
SUBJECT TIME
13.05.19 Monday
PAPER I C/146/AUT/I
BASICS OF AUTOMOBILES 10.00 am To 01.00 pm
14.05.19 Tuesday
PAPER II C/147/AUT/II
BASIC OF TRANSMISSION, SUSPENSION, STEERING SYSTEM & BRAKES
10.00 am To 01.00 pm
15.05.19 Wednesday
PAPER II C/148/AUT/III
BASIC OF ALTERNATIVE ENERGY 10.00 am To 01.00 pm
16.05.19 Thursday
PRACTICAL I & II 10.00 am
To 04.00 pm
DIRECTORATE OF VOCATIONAL EXAMINATION
Important Instructions for students appearing in above mentioned examinations: 1. All the students of all Zones are instructed to remain present at exam center as per the schedule time. 2. All the students are required to carry hall ticket with them issued by the VTC during exam time. 3. All students must be present in their respective examination hall 30 minutes before exam time
JANAKPURI NCVRT New Delhi – 110058 Controller of Examination
NATIONAL COUNCIL OF VOCATIONAL AND RESEARCH TRAINING (An Autonomous Body, Directorate of Vocational Education, Recognized By Government of India)
NEW DELHI-110058
CENTRAL BOARD OF EXAMINATION – MAY 2019 COURSE NAME CERTIFICATE IN AUTOMOBILE ELECTRONICS TECHNOLOGY
DURATION ONE YEAR
COURSE CODE AUT - 304
VOCATIONAL EXAMINATION TIME TABLE
DATE & DAY
PAPER & CODE
SUBJECT TIME
13.05.19 Monday
PAPER I C/149/ADV/I
BASICS OF AUTOMOBILES 10.00 am To 01.00 pm
14.05.19 Tuesday
PAPER II C/150/ADV/II
AUTOMOTIVE ELECTRICAL & ELECTRONICS 10.00 am To 01.00 pm
15.05.19 Wednesday
PRACTICAL I & II 10.00 am
To 04.00 pm
DIRECTORATE OF VOCATIONAL EXAMINATION
Important Instructions for students appearing in above mentioned examinations: 1. All the students of all Zones are instructed to remain present at exam center as per the schedule time. 2. All the students are required to carry hall ticket with them issued by the VTC during exam time. 3. All students must be present in their respective examination hall 30 minutes before exam time
JANAKPURI NCVRT New Delhi – 110058 Controller of Examination
NATIONAL COUNCIL OF VOCATIONAL AND RESEARCH TRAINING (An Autonomous Body, Directorate of Vocational Education, Recognized By Government of India)
NEW DELHI-110058
CENTRAL BOARD OF EXAMINATION – MAY 2019 COURSE NAME CERTIFICATE IN AUTO MOBILE ENGINEERING TECHNIQUES
DURATION ONE YEAR
COURSE CODE AUT-305
VOCATIONAL EXAMINATION TIME TABLE
DATE & DAY
PAPER & CODE
SUBJECT TIME
13.05.19 Monday
PAPER I C/151/AUT/I
BASICS OF AUTOMOBILES 10.00 am To 01.00 pm
14.05.19 Tuesday
PAPER II C/152/AUT/II
BASIC OF TRANSMISSION, SUSPENSION, STEERING SYSTEM & BRAKES
10.00 am To 01.00 pm
15.05.19 Wednesday
PAPER III C/153/AUT/III
BASIC OF ALTERNATIVE ENERGY 10.00 am To 01.00 pm
16.05.19 Thursday
PRACTICAL I & II 10.00 am
To 04.00 pm
DIRECTORATE OF VOCATIONAL EXAMINATION
Important Instructions for students appearing in above mentioned examinations: 1. All the students of all Zones are instructed to remain present at exam center as per the schedule time. 2. All the students are required to carry hall ticket with them issued by the VTC during exam time. 3. All students must be present in their respective examination hall 30 minutes before exam time
JANAKPURI NCVRT New Delhi – 110058 Controller of Examination
NATIONAL COUNCIL OF VOCATIONAL AND RESEARCH TRAINING (An Autonomous Body, Directorate of Vocational Education, Recognized By Government of India)
NEW DELHI-110058
CENTRAL BOARD OF EXAMINATION – MAY 2019 COURSE NAME CERTIFICATE IN WELDER
DURATION ONE YEAR
COURSE CODE AUT- 1206
VOCATIONAL EXAMINATION TIME TABLE
DATE & DAY
PAPER & CODE
SUBJECT TIME
13.05.19 Monday
PAPER I C/154/AUT/I
BASICS OF WELDING 10.00 am To 01.00 pm
14.05.19 Tuesday
PAPER II C/155/AUT/II
WORKSHOP CALCULATION & SCIENCE 10.00 am To 01.00 pm
15.05.19 Wednesday
PAPER III C/156/ AUT/III
ENGINEERING DRAWING 10.00 am To 01.00 pm
16.05.19 Thursday
PRACTICAL I & II 10.00 am
To 04.00 pm
DIRECTORATE OF VOCATIONAL EXAMINATION
Important Instructions for students appearing in above mentioned examinations: 1. All the students of all Zones are instructed to remain present at exam center as per the schedule time. 2. All the students are required to carry hall ticket with them issued by the VTC during exam time. 3. All students must be present in their respective examination hall 30 minutes before exam time
JANAKPURI NCVRT New Delhi – 110058 Controller of Examination
NATIONAL COUNCIL OF VOCATIONAL AND RESEARCH TRAINING (An Autonomous Body, Directorate of Vocational Education, Recognized By Government of India)
NEW DELHI-110058
CENTRAL BOARD OF EXAMINATION – MAY 2019 COURSE NAME DIPLOMA IN AUTOMOBILE ENGINEERING TECHNIQUES (FIRST YEAR)
DURATION TWO YEAR
COURSE CODE AUT-309
VOCATIONAL EXAMINATION TIME TABLE
DATE & DAY
PAPER & CODE
SUBJECT TIME
20.05.19 Monday
PAPER I 157/DI/AUT/I
STRENGTH OF MATERIALS AND AUTOMOBILE ENGINES
10.00 am To 01.00 pm
21.05.19 Tuesday
PAPER II 158/DI/AUT/II
AUTOMOBILE CHASSIS AND TRANSMISSION 10.00 am To 01.00 pm
22.05.19 Monday
PAPER III 159/DI/AUT/III
MACHINE DRAWING 10.00 am To 01.00 pm
23.05.19 Tuesday
PRACTICAL I & II 10.00 am
To 04.00 pm
DIRECTORATE OF VOCATIONAL EXAMINATION
Important Instructions for students appearing in above mentioned examinations: 1. All the students of all Zones are instructed to remain present at exam center as per the schedule time. 2. All the students are required to carry hall ticket with them issued by the VTC during exam time. 3. All students must be present in their respective examination hall 30 minutes before exam time
JANAKPURI NCVRT New Delhi – 110058 Controller of Examination
NATIONAL COUNCIL OF VOCATIONAL AND RESEARCH TRAINING (An Autonomous Body, Directorate of Vocational Education, Recognized By Government of India)
NEW DELHI-110058
CENTRAL BOARD OF EXAMINATION – MAY 2019 COURSE NAME DIPLOMA IN AUTO MOBILE ENGINEERING TECHNIQUES (FINAL YEAR)
DURATION TWO YEAR
COURSE CODE AUT-309
VOCATIONAL EXAMINATION TIME TABLE
DATE & DAY
PAPER & CODE
SUBJECT TIME
27.05.19 Monday
PAPER I 160/DII/AUT/I
MANUFACTURING TECHNOLOGY 10.00 am To 01.00 pm
28.05.19 Tuesday
PAPER II 161/DII/AUT/II
AUTOTRONICS AND ALTERNATE FUELS AND ENERGY SYSTEM
10.00 am To 01.00 pm
29.05.19 Monday
PAPER III 162/DII/AUT/III
TWO AND THREE WHEELER TECHNOLOGY 10.00 am To 01.00 pm
30.05.19 Tuesday
PRACTICAL I & II 10.00 am
To 04.00 pm
DIRECTORATE OF VOCATIONAL EXAMINATION
Important Instructions for students appearing in above mentioned examinations: 1. All the students of all Zones are instructed to remain present at exam center as per the schedule time. 2. All the students are required to carry hall ticket with them issued by the VTC during exam time. 3. All students must be present in their respective examination hall 30 minutes before exam time
JANAKPURI NCVRT New Delhi – 110058 Controller of Examination
NATIONAL COUNCIL OF VOCATIONAL AND RESEARCH TRAINING (An Autonomous Body, Directorate of Vocational Education, Recognized By Government of India)
NEW DELHI-110058
CENTRAL BOARD OF EXAMINATION – MAY 2019 COURSE NAME DIPLOMA IN FOUR WHEELER MECHANIC (FIRST YEAR)
DURATION TWO YEAR
COURSE CODE AUT-318
VOCATIONAL EXAMINATION TIME TABLE
DATE & DAY
PAPER & CODE
SUBJECT TIME
20.05.19 Monday
PAPER I 163/DI/AUT/I
VEHICLE STRUCTURE AND ENGINES 10.00 am To 01.00 pm
21.05.19 Tuesday
PAPER II 164/DI/AUT/II
ENGINE AUXILIARY SYSTEMS 10.00 am To 01.00 pm
22.05.19 Monday
PAPER III 165/DI/AUT/III
TRANSMISSION SYSTEMS 10.00 am To 01.00 pm
23.05.19 Tuesday
PRACTICAL I & II 10.00 am
To 04.00 pm
DIRECTORATE OF VOCATIONAL EXAMINATION
Important Instructions for students appearing in above mentioned examinations: 1. All the students of all Zones are instructed to remain present at exam center as per the schedule time. 2. All the students are required to carry hall ticket with them issued by the VTC during exam time. 3. All students must be present in their respective examination hall 30 minutes before exam time
JANAKPURI NCVRT New Delhi – 110058 Controller of Examination
NATIONAL COUNCIL OF VOCATIONAL AND RESEARCH TRAINING (An Autonomous Body, Directorate of Vocational Education, Recognized By Government of India)
NEW DELHI-110058
CENTRAL BOARD OF EXAMINATION – MAY 2019 COURSE NAME DIPLOMA IN FOUR WHEELER MECHANIC (FINAL YEAR)
DURATION TWO YEAR
COURSE CODE AUT-318
VOCATIONAL EXAMINATION TIME TABLE
DATE & DAY
PAPER & CODE
SUBJECT TIME
27.05.19 Monday
PAPER I 166/DII/AUT/I
STEERING , BREAKS AND SUSPENTION SYSTEMS
10.00 am To 01.00 pm
28.05.19 Tuesday
PAPER II 167/DII/AUT/II
ALTERNATIVE ENERGY SOURCES 10.00 am To 01.00 pm
29.05.19 Monday
PAPER III 168/DII/AUT/III
BASIC AUTOMOTIVE SERVICING FOUR WHEELERS
10.00 am To 01.00 pm
30.05.19 Tuesday
PRACTICAL I & II 10.00 am
To 04.00 pm
DIRECTORATE OF VOCATIONAL EXAMINATION
Important Instructions for students appearing in above mentioned examinations: 1. All the students of all Zones are instructed to remain present at exam center as per the schedule time. 2. All the students are required to carry hall ticket with them issued by the VTC during exam time. 3. All students must be present in their respective examination hall 30 minutes before exam time
JANAKPURI NCVRT New Delhi – 110058 Controller of Examination
NATIONAL COUNCIL OF VOCATIONAL AND RESEARCH TRAINING (An Autonomous Body, Directorate of Vocational Education, Recognized By Government of India)
NEW DELHI-110058
CENTRAL BOARD OF EXAMINATION – MAY 2019 COURSE NAME DIPLOMA IN AUTOMOBILE ELECTRONICS TECHNOLOGY (FIRST YEAR)
DURATION TWO YEAR
COURSE CODE AUT-319
VOCATIONAL EXAMINATION TIME TABLE
DATE & DAY
PAPER & CODE
SUBJECT TIME
20.05.19 Monday
PAPER I 169/DI/AUT/I
BASICS OF AUTOMOBILES 10.00 am To 01.00 pm
21.05.19 Tuesday
PAPER II 170/DI/AUT/II
DESIGN OF MACHINE ELEMENTS 10.00 am To 01.00 pm
22.05.19 Monday
PAPER III 171/DI/AUT/III
AUTOMOTIVE ELECTRICAL AND ELECTRONICS
10.00 am To 01.00 pm
23.05.19 Tuesday
PRACTICAL I & II 10.00 am
To 04.00 pm
DIRECTORATE OF VOCATIONAL EXAMINATION
Important Instructions for students appearing in above mentioned examinations: 1. All the students of all Zones are instructed to remain present at exam center as per the schedule time. 2. All the students are required to carry hall ticket with them issued by the VTC during exam time. 3. All students must be present in their respective examination hall 30 minutes before exam time
JANAKPURI NCVRT New Delhi – 110058 Controller of Examination
NATIONAL COUNCIL OF VOCATIONAL AND RESEARCH TRAINING (An Autonomous Body, Directorate of Vocational Education, Recognized By Government of India)
NEW DELHI-110058
CENTRAL BOARD OF EXAMINATION – MAY 2019 COURSE NAME DIPLOMA IN AUTOMOBILE ELECTRONICS TECHNOLOGY (FINAL YEAR)
DURATION TWO YEAR
COURSE CODE AUT-319
VOCATIONAL EXAMINATION TIME TABLE
DATE & DAY
PAPER & CODE
SUBJECT TIME
27.05.19 Monday
PAPER I 172/DII/AUT/I
PRINCIPLES OF ELECTRICAL AND ELECTRONICS
10.00 am To 01.00 pm
28.05.19 Tuesday
PAPER II 173/DII/AUT/II
ASSEMBLIES AND AUTO-ELECTRICAL 10.00 am To 01.00 pm
29.05.19 Monday
PAPER III 174/DII/AUT/III
TWO AND THREE WHEELER MECHANIC 10.00 am To 01.00 pm
30.05.19 Tuesday
PRACTICAL I & II 10.00 am
To 04.00 pm
DIRECTORATE OF VOCATIONAL EXAMINATION
Important Instructions for students appearing in above mentioned examinations: 1. All the students of all Zones are instructed to remain present at exam center as per the schedule time. 2. All the students are required to carry hall ticket with them issued by the VTC during exam time. 3. All students must be present in their respective examination hall 30 minutes before exam time
JANAKPURI NCVRT New Delhi – 110058 Controller of Examination
NATIONAL COUNCIL OF VOCATIONAL AND RESEARCH TRAINING (An Autonomous Body, Directorate of Vocational Education, Recognized By Government of India)
NEW DELHI-110058
CENTRAL BOARD OF EXAMINATION – MAY 2019 COURSE NAME DIPLOMA IN AUTO MOBILE ENGINEERING (FIRST YEAR)
DURATION TWO YEAR
COURSE CODE AUT-320
VOCATIONAL EXAMINATION TIME TABLE
DATE & DAY
PAPER & CODE
SUBJECT TIME
20.05.19 Monday
PAPER I 175/DI/AUT/I
AUTOMOBILE ENGINES 10.00 am To 01.00 pm
21.05.19 Tuesday
PAPER II 176/DI/AUT/II
AUTOMOBILE CHASSIS AND TRANSMISSION 10.00 am To 01.00 pm
22.05.19 Monday
PAPER III 177/DI/AUT/III
ENGINEERING DRAWING 10.00 am To 01.00 pm
23.05.19 Tuesday
PRACTICAL I & II 10.00 am
To 04.00 pm
DIRECTORATE OF VOCATIONAL EXAMINATION
Important Instructions for students appearing in above mentioned examinations: 1. All the students of all Zones are instructed to remain present at exam center as per the schedule time. 2. All the students are required to carry hall ticket with them issued by the VTC during exam time. 3. All students must be present in their respective examination hall 30 minutes before exam time
JANAKPURI NCVRT New Delhi – 110058 Controller of Examination
NATIONAL COUNCIL OF VOCATIONAL AND RESEARCH TRAINING (An Autonomous Body, Directorate of Vocational Education, Recognized By Government of India)
NEW DELHI-110058
CENTRAL BOARD OF EXAMINATION – MAY 2019 COURSE NAME DIPLOMA IN AUTO MOBILE ENGINEERING (FINAL YEAR)
DURATION TWO YEAR
COURSE CODE AUT-320
VOCATIONAL EXAMINATION TIME TABLE
DATE & DAY
PAPER & CODE
SUBJECT TIME
27.05.19 Monday
PAPER I 178/DII/AUT/I
WORK SHOP TECHNOLOGY 10.00 am To 01.00 pm
28.05.19 Tuesday
PAPER II 179/DII/AUT/II
AUTOTRONICS AND BODY BUILDING ENGINEERING
10.00 am To 01.00 pm
29.05.19 Monday
PAPER III 180/DII/AUT/III
TWO AND THREE WHEELER TECHNOLOGY 10.00 am To 01.00 pm
30.05.19 Tuesday
PRACTICAL I & II 10.00 am
To 04.00 pm
DIRECTORATE OF VOCATIONAL EXAMINATION
Important Instructions for students appearing in above mentioned examinations: 1. All the students of all Zones are instructed to remain present at exam center as per the schedule time. 2. All the students are required to carry hall ticket with them issued by the VTC during exam time. 3. All students must be present in their respective examination hall 30 minutes before exam time
JANAKPURI NCVRT New Delhi – 110058 Controller of Examination
NATIONAL COUNCIL OF VOCATIONAL AND RESEARCH TRAINING (An Autonomous Body, Directorate of Vocational Education, Recognized By Government of India)
NEW DELHI-110058
CENTRAL BOARD OF EXAMINATION – MAY 2019 COURSE NAME DIPLOMA IN WELDER (FIRST YEAR)
DURATION TWO YEAR
COURSE CODE AUT-1229
VOCATIONAL EXAMINATION TIME TABLE
DATE & DAY
PAPER & CODE
SUBJECT TIME
20.05.19 Monday
PAPER I 181/DI/AUT/I
ARC AND GAS WELDING 10.00 am To 01.00 pm
21.05.19 Tuesday
PAPER II 182/DI/AUT/II
WORKSHOP CALCULATION & SCIENCE 10.00 am To 01.00 pm
22.05.19 Monday
PRACTICAL I & II 10.00 am
To 04.00 pm
DIRECTORATE OF VOCATIONAL EXAMINATION
Important Instructions for students appearing in above mentioned examinations: 1. All the students of all Zones are instructed to remain present at exam center as per the schedule time. 2. All the students are required to carry hall ticket with them issued by the VTC during exam time. 3. All students must be present in their respective examination hall 30 minutes before exam time
JANAKPURI NCVRT New Delhi – 110058 Controller of Examination
NATIONAL COUNCIL OF VOCATIONAL AND RESEARCH TRAINING (An Autonomous Body, Directorate of Vocational Education, Recognized By Government of India)
NEW DELHI-110058
CENTRAL BOARD OF EXAMINATION – MAY 2019 COURSE NAME DIPLOMA IN WELDER (FINAL YEAR)
DURATION TWO YEAR
COURSE CODE AUT-1229
VOCATIONAL EXAMINATION TIME TABLE
DATE & DAY
PAPER & CODE
SUBJECT TIME
27.05.19 Monday
PAPER I 183/DII/AUT/I
TIG/MIG WELDER 10.00 am To 01.00 pm
28.05.19 Tuesday
PAPER II 184/DII/AUT/II
ENGINEERING DRAWING 10.00 am To 01.00 pm
29.05.19 Monday
PRACTICAL I & II 10.00 am
To 04.00 pm
DIRECTORATE OF VOCATIONAL EXAMINATION
Important Instructions for students appearing in above mentioned examinations: 1. All the students of all Zones are instructed to remain present at exam center as per the schedule time. 2. All the students are required to carry hall ticket with them issued by the VTC during exam time. 3. All students must be present in their respective examination hall 30 minutes before exam time
JANAKPURI NCVRT New Delhi – 110058 Controller of Examination