● Informative, integrative and high end modular patient montior
● 12.1” color TFT LCD with full touch screen for quick menu setting & data review
● Fanless cooling system to assure quiet operation
● Patented with technology of Ambient Brighness Sensor
● Optional configuration of built in thermal printer, 12 lead ECG, IBP, Nellcor SPO2, EtCO2,
ICG, GPRS module, Multi-Gas, Temp probe, Remote Controller, Bracket, Trolley, Li-ion Battery
● Thermal recorder supporting 3 waveform and 4 record mode
● Thermal recorder supporting 3 waveform and 4 record mode
● Patented with technology of Ambient Brighness Sensor
● 4 different display modes, 7 real time waveforms
● Fanless cooling system to assure quiet operation
● Various connectibility and mounting solutions
● LAN/WLAN network solution for up to 128 bedside monitor
● Can upgrade with AGM, BIS, RM, CO, GPRS module,
12 lead ECG module, etc.
● 4 different display modes, 7 real time waveforms
● Applicable to ICU, OR, ER, PACU, patient ward, etc
Modular Patient Monitor ---- CritiVue 60
● Standard configuration of ECG, NIBP, RESP, SPO2, TEMP, PR,
Drug dose calculation, OXYCRG + Modular Function
Modular Patient Monitor ---- CritiVue 50
Modular Patient Monitor ---- CritiVue 70
● Informative, integrative and high end modular patient montior
● Standard configuration of ECG, NIBP, RESP, SPO2, TEMP, PR,
Drug dose calculation, OXYCRG + Modular Function
● Fanless cooling system to assure quiet operation
● Patented with technology of Ambient Brighness Sensor
● 15” color TFT LCD with full touch screen for quick menu setting & data review
● Can upgrade with AGM, BIS, RM, CO, GPRS module,
12 lead ECG module, etc.
● Various connectibility and mounting solutions
● Optional configuration of built in thermal printer, 12 lead ECG, IBP, Nellcor SPO2, EtCO2,
ICG, GPRS module, Multi-Gas, Temp probe, Remote Controller, Bracket, Trolley, Li-ion Battery
● 10.4” color TFT LCD with full touch screen for quick menu setting & data review
● LAN/WLAN network solution for up to 128 bedside monitor
● Applicable to ICU, OR, ER, PACU, patient ward, etc
● Standard configuration of ECG, NIBP, RESP, SPO2, TEMP, PR,
Drug dose calculation, OXYCRG + Modular Function
● Optional configuration of built in thermal printer, 12 lead ECG, IBP, Nellcor SPO2, EtCO2,
ICG, GPRS module, Multi-Gas, Temp probe, Remote Controller, Bracket, Trolley, Li-ion Battery
● 4 different display modes, 7 real time waveforms
● Informative, integrative and high end modular patient montior
● Thermal recorder supporting 3 waveform and 4 record mode
● Can upgrade with AGM, BIS, RM, CO, GPRS module,
12 lead ECG module, etc.
● Various connectibility and mounting solutions
● LAN/WLAN network solution for up to 128 bedside monitor
● Applicable to ICU, OR, ER, PACU, patient ward, etc
● Simultaneous display 9 channel waveform with 9 mode of presentation
● Wall mounting design with only 6cm in width
● Analyzing real time ST segment and arrhythmia
● Unique modes for direct/reverse/quick measuring
● Standard configuration of ECG, NIBP, RESP,SPO2, 1-TEMP, PR,
Drug dose calculation, OXYCRG
● Analyzing real time ST segment and arrhythmia
Multiparameter Patient Monitor ---- GT9003F
● 15” high resolution Color TFT LCD
● 15” (1024x768) high resolution Color TFT LCD
● Simultaneous display 10 channel waveform
● Anti-defibrillation and anti-ESU interference
● Anti-defibrillation and anti-ESU interference
● Maximum 72 hour graphic and tabular trend, with data storage of
1440 group NIBP data
● Optional configuration of built in thermal printer, 2-TEMP, EtCO2, IBP
● Anti-defibrillation and anti-ESU interference
● Unique modes for direct/reverse/quick measuring
● Standard configuration of ECG, NIBP, RESP, SPO2, TEMP, PR,
Drug dose calculation, OXYCRG
● Standard configuration of ECG, NIBP, RESP, SPO2, 1-TEMP,
PR, Drug dose calculation, OXYCRG
● Ethernet connection to support network capacity of individual beds
& compatibility with HIS
● Optional configuration of built in thermal printer, 2-TEMP, EtCO2, IBP
Multiparameter Patient Monitor ---- CPM-9000W
● 12.1” high resolution Color TFT LCD (optional 15" LCD)
● Simultaneous display 9 channel waveform with 9 mode of presentation
● Maximum 72 hour graphic and tabular trend, with data storage of
1440 group NIBP data
● Ethernet connection to support network capacity of individual beds
& compatibility with HIS
● Maximum 168 hour graphic and tabular trend, with data storage of
1000 group NIBP data
● Optional configuration of built in thermal printer, 12 lead ECG,
IBP, Nellcor SPO2, EtCO2, ICG, Multi-Gas,
● Ethernet connection to support network capacity of individual beds
& compatibility with HIS
Multiparameter Patient Monitor ---- M9500
● Dual NIBP with over pressure protection
● Analyzing real time ST segment and arrhythmia
● NIBP range protection. 2880 NIBP groups storage and 120 groups’ alarm
● Maximum 120 hour graphic and tabular trend with data storage
● Anti-defibrillation and anti-ESU interference
● Ethernet connection to support network capacity & compatibility with HIS
● ST analysis, arrhythmia analysis, OXY-CRG analysis
● Optional configuration of built in thermal printer, 2-TEMP, IBP, CO, EtCO2
● Maximum 72 hour graphic and tabular trend with data storage
● Standard configuration of ECG, NIBP, RESP,SPO2, 1-TEMP, PR, Drug
dose calculation, OXYCRG
● Analyzing real time ST segment and arrhythmia
● Anti-defibrillation and anti-ESU interference
● Ethernet connection to support network capacity & compatibility with HIS
● Analyzing real time ST segment and arrhythmia
● Analyzing real time ST segment and arrhythmia
Multiparameter Patient Monitor ---- PM-100A
Multiparameter Patient Monitor ---- CPM-8000
● Ethernet connection to support network capacity & compatibility with HIS
● Anti-defibrillation and anti-ESU interference
● Front slots for sensors, easy to use, handle bar
● Built-in Lithium battery
● Max 9 waveforms with 7 ECG leads
● 72 hours trend review. Data auto-saving
● 8.4 inch high resolution TFT color LCD
● Simultaneous display 7 channel waveform
● Applicable to adult, pediatric and neonatal
● Optional configuration of built in thermal printer, 2-TEP, IBP, CO, EtCO2
Multiparameter Patient Monitor ---- GT9000F
● 10.4 inch high resolution TFT color LCD
● Dual NIBP with over pressure protection
● Standard configuration of ECG, NIBP, RESP,SPO2, 1-TEMP, PR, Drug
dose calculation, OXYCRG
● 10.4 inch high resolution TFT color LCD
● Simultaneous display 7 channel waveform
● Optional configuration of built in thermal printer, 2-TEP, IBP, CO, EtCO2
● Standard configuration of ECG, NIBP, RESP,SPO2, 2-TEMP, PR, Drug
dose calculation, OXYCRG
● Optional configuration of built in thermal printer, IBP, EtCO2
● 12.1” high resolution Color TFT LCD
● Simultaneous display 7 channel waveform
Multiparameter Patient Monitor ---- CMS-8000
● Maximum 72 hour storage and erview of trend graphic & tabular trend, 40
second review of holographic waveforms
● Standard configuration of ECG, NIBP, RESP,SPO2, 1-TEMP, PR, Drug
dose calculation, OXYCRG
● Horizontal amd vertical display selectable
● Free advanced software for data downloading, telemonitoring, and
bluetooth printer (optional) to print out ECG waveform and other data
● Meeting requirements of hospital & other deparments in emergency treatment, first aid, rescue, etc
● Automatic power off
● Anti-defibrillation and anti-ESU interference
● Applicable to adult, pediatric and neonatal
● Analyzing real time ST segment and arrhythmia
Handheld Patient Monitor ---- PM-900A
● LED and 3.5” Color TFT LCD to display ECG/NIBP/SPO2/PR/RESP/TEMP
● Adjustable au udible and visible alarm, and sensor off alarm
● Anti-defibrillation and anti-ESU interference
● 5" Color LCD with touch screen to display ECG/NIBP/SPO2/PR/PLETH/TEMP
● Ethernet connection to support network capacity & compatibility with HIS
● Suitable for bedside monitoring in hospital, or monitoring during transportation
● Optional configuration of GPRS, GPS, WLAN card
● Built in rechargeable Li-ion battery supporting 12 hour operation
● Standard configuration of ECG, NIBP, RESP,SPO2, 1-TEMP, PR, Drug
dose calculation, OXYCRG
● Storing 72 hour graphic and tabular trend data, 1200 group NIBP
● Simultaneous display 8 channel waveform
● Dual NIBP with over pressure protection
Multiparameter Patient Monitor ---- PM-300A
● 7 inch high resolution TFT color LCD
● Ethernet connection to support network capacity & compatibility with HIS
● Standard configuration of ECG, NIBP, RESP,SPO2, 1-TEMP, PR, Drug
dose calculation, OXYCRG
● Optional configuration of built in thermal printer, 2-TEMP, IBP, CO, EtCO2
● Maximum 72 hour graphic and tabular trend with data storage
● 8.4 inch high resolution TFT color LCD
Multiparameter Patient Monitor ---- CMS-6000A
● Analyzing real time ST segment and arrhythmia
● Simultaneous display 4 channel waveform
● Car power adaptor
● Ethernet connection to support network capacity & compatibility with HIS
● USB and bluetooth data upload
● Built in rechargeable Li-ion battery supporting 15 hour operation
Handheld Patient Monitor ---- GT9003C
● Standard configuration of ECG, NIBP, RESP,SPO2, 1-TEMP, PR, Drug
dose calculation, OXYCRG
● Maximum 48 hour graphic and tabular trend with data storage
● Storage/Review data upt ot 9999 user ID and3888 group trend data
● Long time monitoring and sleeping monitoring
● Optional configuration of built in thermal printer, 12 lead ECG,
Model NIBP ECG
CareVue 30A ●
CareVue 30B
CareVue 30C ●
CareVue 30D ●
CareVue 30E ● ●
CareVue 30F ●
CareVue 30G ● ●
● Configuration as follows
● Various connectibility and mounting solutions
● Standard configuration of EtCO2/CO2, RESP. , SPO2 for KMI605B
● Optional PR
●
● Indicator for low battery capacity with related prompt
● Automatic power off in case no operation within the preset time
● Configuration of NIBP, SpO2, PR and PLETH for PM-800B
● 2.8 inch color LCD to display PR strength and/or SpO2 waveform
●
● Configuration of NIBP and PR for PM-800C
● Configuration of SpO2, TEMP, PR and PLETH for PM-800D
● Configuration of NIBP, SpO2, PR, TEMP, and PLETH for PM-800A
● Maximum 3888 groups of storage/review trend data with duration
for each data selectable
● Compatible with anesthesia machine
●
● Big LCD to display parameter measurement
● Standard configuration of EtCO2/CO2, RESP. for KMI605A
Vital Sign Monitor ---- PM-800 Series
●
● SD Card for storage of more than 10,000 patients data and info
● Storage of 4,000 groups trend data
● Anti-defibrillation and anti-electrosurgical interference
● Shockproof and waterproof with high reliability
TEMP
● Car power adaptor and nurse call
● Unique ambient brightness sensor to ensure patients for better rest
● Ethernet connection
● More than 10 hours long life Li-ion battery
●
●
● Very light weight, dedicated to mobile medical applications
● Numeric LED + 3.2' Graphic TFT LCD with integrative display
● LAN/WLAN network solution for up to 128 bedside monitor
Vital Sign Monitor ----CareVue 30 Series
● Two Plethysmogram waveforms
● Audible & visual alarm when parameters exceeds and/or sensor-off
● Infrared ray gas analysis
● Built-in rechargeable Li-ion battery supporting 4 hour operation
Vital Sign Monitor for EtCO2 ---- KMI605 Series
● USB interface for PC connection to support tele-monitoring by data transmission via internet
EtCO2
● Audible and visual alarm for apnea limit exceeding
● Storing 24 hour trend data
● RS232 interface for data transmission
SPO2
●
●
●
●
●
●
● Unique software for telemonitoring by data transmission synchronously via internet
● Bluetooth wireless to realize reviewing the measurements in big screen via
connecting PC and upload history data to PC for review, printing or storage
● Laptop design with compact structure
● Standard configuration of SPO2 and Pulse Rate
● Audible and visual alarm for sensor-off with alarm limit selectable
● AA alkaline or rechargeable battery
● Automatic power off in case no operation within 3 minutes
● Indicator for battery capacity with related prompt in case of low battery capacity
● Audible and visual alarm for sensor-off with alarm limit selectable
● Indicator for battery capacity with related prompt in case of low battery capacity
● Long time monitoring and sleeping monitoring
● Built-in rechargeable Li-ion battery with maximum 15 hour operation time
● Automatic power off in case no operation within the preset time duration
● Brightness adjustable LED to display SPO2 and PR
● Audible and visual alarm with limit changeable
● Built-in rechargeable Li-ion battery with maximum 15 hour operation time
Handheld Pulse Oximeter ---- PM-600C
● Laptop design with compact structure
Handheld Pulse Oximeter ---- PM-600D
● Two way for battery charging: USB port of PC or AC power adapter
● Automatic power off in case no operation within 3 minutes
● Standard configuration of SPO2 and Pulse Rate
● Brightness adjustable LED to indicate SPO2 and PR
Handheld Pulse Oximeter ---- PM-600B
● Standard configuration of SPO2, PR and PLETH
● 2.8 inch color LCD for real time display SpO2 waveform and PR strength
● AA alkaline battery to support continuous 6 hour operation time
● AA alkaline/built in rechargeable battery
● Long time monitoring and sleeping monitoring
● Audible and visual alarm when parameters exceeded and/or sensor-off
● Optional configuration of TEMP and AC power
● Automatic power off in case no operation within the preset time duration
● Indicator for battery capacity with related prompt in case of low battery capacity
● 2.8 inch color TFT LCD for real time display in big font and big screen
● Audible and visual alarm when parameters exceeded and/or sensor-off
Handheld Pulse Oximeter ---- PM-600A
● Laptop design with compact structure
● Storage/Review trend data up to 3888 groups, with data save time
interval settable
● Standard configuration of SPO2, TEMP, PR and PLETH
● Powered by disposable alkaline batteries
● Applicable to hospital, community medical center,
oxygen bar, home/sports healthcare
● Powered by two pieces of disposable alkaline batteries
● 6 display modes
Fingertip Pulse Oximeter ---- PM-500B
● Integrated with SPO2 probe and processing display module
● 64K color OLED display
● 4-direction readings manually
● Display of SpO2, PR, SpO2 bar graph, PR waveform and PLETH
● Auto-OFF after 5 seconds without operation
● Easy to use with one key operation
● Less than 0.4% perfusion
● Four directions display by manual change
● Applicable to person with lung disease, sports enthusiast, who often over
works, who likes to be sottish, over 60 year old, as well traveler to altiplano area
● Accurate monitoring enven in case of perfusion less than 0.4%
● Automatic power off when no signals fater 8 seconds
● Standard configuration of the main unit A2, 2xbattey and one string
● Laptop design with compact structure
● Indicator for battery capacity with related prompt in case of low battery capacity
Handheld Pulse Oximeter ---- PM-600E
● Audible and visual alarm for sensor-off with alarm limit selectable
● Standard configuration of SPO2 and Pulse Rate
● Clear and bright red LED to display SPO2, PR and PR strength
● Display of SpO2, PR, SpO2 bar graph, PR waveform
● Auto-OFF after 8 seconds without operation
● Available of six display modes, big font, digital and plethysmogram (PLETH)
● Light weight of 55g (batteries included)
● AA alkaline batteries to support continuous 7 hour operation time
● Automatic power off in case no operation within the preset time duration
Fingertip Pulse Oximeter ---- A3
● Colorful OLED display
● Standard configuration of SPO2, Pulse Rate and SPO2 waveform
● Available of audible, visual alarm and low voltage indicator
● Common AAA alkaline or rechargeable batteries
● Less than 0.4% perfusion
Fingertip Pulse Oximeter ---- A2
● Four direction readings automatically
● OLED single display
● Visual alarm of low battery capacity
● Powered by disposable alkaline batteries
● Applicable to hospital, community medical center,
oxygen bar, home/sports healthcare
Fingertip Pulse Oximeter ---- PM-500A
● Integrated with SPO2 probe and processing display module
● LED display
● 4-direction readings manually
Fingertip Pulse Oximeter ---- CMS50B
● Small in volume,light in weight and convenient in carrying
Fingertip Pulse Oximeter ---- CMS50DL
● Small in volume,light in weight and convenient in carrying
● Standard configuration of SPO2 and PR
● LED to display SpO2, PR, SPO2 bar graph and PR strength
● Operation of the product is simple ,low power consumption
● Low voltage indicator appears in case of abnormality caused by low-voltage
● Powered by disposable alkaline batteries
● Integrated with SpO2 probe and processing display module
● Powered by disposable alkaline batteries
● Less than 0.4% perfusion
● Automatically power off within 5 seconds if the finger falls out of probe
● Less than 0.4% perfusion
● Integrated with SpO2 probe and processing display module
● Standard configuration of SPO2 and PR
Fingertip Pulse Oximeter ---- CMS50DL1
● Small in volume,light in weight and convenient in carrying
● Integrated with SpO2 probe and processing display module
● Display of SpO2, PR, SpO2 bar graph, PR waveform
● Auto-OFF after 5 seconds without operation
● Easy to use with one key operation
● Less than 0.4% perfusion
● Operation of the product is simple ,low power consumption
● Low voltage indicator appears in case of abnormality caused by low-voltage
● 64K color OLED to display SPO2, PR, Pulse strength, PLETH and low
battery capacity, with four direction adjustable
● Powered by disposable alkaline batteries
● Automatically power off within 5 seconds if the finger falls out of probe
● Less than 0.4% perfusion
● Standard configuration of SPO2 and PR
● Automatically power off within 5 seconds if the finger falls out of probe
● LED to display SpO2, PR, SPO2 bar graph and PR strength
● Operation of the product is simple ,low power consumption
● Low voltage indicator appears in case of abnormality caused by low-voltage
● Suitable for patients suffered with SAS, OSAHS, COPD, ARDS,
vascular diseases, as well persons over 60 years
● Applicable to hospital examination or healthcare at home
● Wrist type equipment, tiny and light
● Convenient operation
● 1.8" color OLED to display SpO2, pulse rate, pulse
waveform and nose flow waveform
● TF card multi-case record
● User friendly can be used in patients's home
● Icon operation, recording time and battery power indication
● 24 hours embedded recording capacity, micro-SD and bluetooth optional
Respiration Sleep Monitor ---- YH-300
● Watch style, light weight and low electricity consumption
● Compliant with level IV of international sleep diagnosis standard
Respiration Sleep Monitor ---- CMS-RS01
● Data uploaded by internal card reader
● Indicated for the screening of sleep disordered breathing
● Patient information can be displayed on device
● Nose air flow measure: Measuring range of 8rpm～40rpm, Accuracy of ±2rpm
● Pulse Rate: Measuring range of 30bpm～250bpm,
Accuracy of ±2 bpm or ±2% (whichever bigger)
● SpO2: Measuring range of 35%～100%, Accuracy of ±
2% for 70%~100%, and unspecified for <70%
● PC analysis software
● Alarms for low-power, finger-out and exceeding limits
● Adjustable screen brightness
● Real-time clock
● Time power on/off and manual power on/off
● Dimension: 69mm(L)× 50mm(W)×17.3mm (H)
● Power Supply : ONE 3.7V Lithium Battery
● Specifications
● Records data of respiratory oral and nasal airflow,
snoring, oxygen saturation, pulse rate and CPAP pressure
● 7 parameters of SPO2, Pulse Rate, Airflow, Snoring,
CPAP Pressure, Recording Time and Battery Power
● Compliance evaluation of CPAP therapy
● Online data analysis
● 2 inch OLED, displays all parameters and waves in real time
● Countdown setting for record, device automatically
start record at the end of countdown
● Abundant applications as screening of SDB, evaluation of CPAP
compliance, homecare of respiratory and pulmonary disease
● Powerful software and concise report, with analysis software
including sleep disordered breathing, oxygen desaturation index.
● Built in thermal printer
● Built in network capability for connect with central monitoring software
● Progammable alarms
● All the colors and looks for the parameters can be customized
● Multi-face views, select focus on mother or fetal
● Storage of patient information and data
● Built in thermal printer of 156mm supporting 75mm/s play back printing
Maternal/Fetal Monitor---- CMS800F
● 8.4 inch TFT color LCD with touch screen and 60 degree folding
● Single or twins ultrasound transducer
● Data graph and trend table review of both mother and fetal
● Standard configuration of FHR, TOCO, FM, AFM for fetal, ECG, NIBP,
SPO2, RESP and TEMP for maternal
● Multi-core processor to enable real time analysis and assist clinical diagnosis
● Waterproof transducer with wide beam and high sensitivity
● Inegrated design with wireless transducer and/or wire transducer to Double bed monitoring and triplets nonitoringenable
● Storage of 72 hours CTG graph, 1000NIBP and other maternal parameters
● Powerful file management with data input and transmission function
● SD card to store more than 5000 files
● Built in rechargeable Li-ion battery
● Built in network capacity
● Optional real time twin FHR monitoring
● Optional twins monitoring function
Fetal Monitor---- CMS800G
● Wireless remote controller to operation within a range of 20 meter
● Latest uterine contraction probe with the function of fetal stimulating
● 8.4 inch TFT color LCD with touch screen and 60 degree folding
● Automatic fetal movement detection
● Self correlation algorithm for stable, acurate and continuous measurement
● Flexible and convenient operation with wireless remote controller
● Built in PC network connection capacity optional telemetry network
● Optional touch screen with intuitive user interface for easy operation
● Waterproof probe for parturition under water
● Standard configuration of FHR (Fetal Heart Rate), TOCO (Uterus Constriction)
● Normal FHR range with adjustment in highlight
● FHR display for twins as separate/Overlap 4 type self-defined event marks
● 10 hour data memory
● Built in thermal printer with high resolution and long life time
● Recoding all the parameters in graphic tendency curve as well numeric data
Maternal/Fetal Monitor ---- SRF618K9
Fetal Monitor ---- SRF618B5
● 8.4 inch TFT LCD with 70 degree folding to display FHR and TOCO in graphic
curves and numeric data
● Tri-network of RS485, LAN and WLAN for convenient and flexible operation
● Central monitoring system supporting connection of up to 60 units
● 12.1" foldable high resolution TFT LCD with three options for display interface
Handheld Fetal Doppler ---- BF-560
● Pocket Fetal Doppler mainly applies to detect the fetal heartbeat
rate from the twelfth week
● Backlight LCD to display FHR for darkness use: show the probe
working frequency, battery capacity, doppler signal and alarm indicator
● User frendly interface makes easy operation
● Sound amplified and recorded function
● Output jack can be connect toinstruments (headset)
● Light weight (2kG only) can be fixed on wall or laid on table while working
● Standard configuration of FHR (Fetal Heart Rate), TOCO (Uterus
Constriction), and FM (Fetal Movement)
● Built in rechargeable battery supporting 4 hour operation
● Store and hold DHR data and graphics for up to 12 hours (optional)
● Optional built in thermal printer to print out real time FHR graph
● LCD to display FHR, real time FHR, heart rate graph, battery capacity, sound
volume and synchronous FHR signal
● Probes of 2MHz and 5MHz for detection of FHR and umbilical blood stream
as well interchange
● RS232 interface for data transmission to PC
● LED to display FHR, TOCO and FM in numeric data
● Alarming on probe off position and abnormal FHR
● Built in thermal printer with 3 grade (1/2/3 crn/min) tracing speed
● Built in network connection capacity
● Built in network connection capacity
● Standard configuration of FHR (Fetal Heart Rate), TOCO (Uterus
Constriction), and FM (Fetal Movement)
● Optional twins monitoring function
Fetal Monitor ---- SRF618B
● 5.7 inch blue backlight LCD with high resolution and luminence to display
FHR, TOCO and FM
● Recoding all the parameters in graphic tendency curve as well numeric data
● Adjustable FHR alarming system on probe off position and abnormal FHR
● Built in thermal printer with 3 grade (1/2/3 crn/min) tracing speed
Fetal Monitor--- SRF-618B++
Fetal Doppler ---- BF-610
● Alarm for FHR beyond normal range and lower battery capacity
● Applicable to detect fetal heart heart rate from the twelfth week
● Clear sound with a high quality loudspeaker
● 1.5V batteries be chosen by alkaline battery or rechargeable batteries
● Mutlti probe with 2.0MHz as standard one, and optional 3.0/5.0/8.0MHz
● Only 270g, Can be carried conveniently with a gallus
● Probe of 2MHz for accurate detection of FHR, with
various frequency probes as optional application
Handheld Fetal Doppler ---- BF-500D
● Pocket Fetal Doppler mainly applies to detect the fetal heartbeat
rate from the twelfth week
● Dry battery, with rubber cover
● Built-in speaker and collocated with earphone jack
● Automatic power off ( one minute), self-detect function,
and alarm function when FHR is out of the normal range
or battery power is in shortage
● Automatic power off in 1 minute without any operation
● Probe of 2.5MHz for accurate detection of FHR
Handheld Fetal Doppler ---- FD-02
● Two operation mode of real time and average
● FDA approved BF-500++
Handheld Fetal Doppler ---- FD-01
● Blue backlight LCD display for use conveniently at night (only for BF-500++)
● LCD to display FHR accurately (only for BF-500+ and BF-500++)
● Built-in rechargeable battery can work continuously more than 4 hours
● Pocket Fetal Doppler mainly applies to detect the fetal heartbeat
rate from the twelfth week
Handheld Fetal Doppler ---- BF-500 Series
● Alarm function when FHR is out of the normal range or battery
power is in shortage (only for BF-500+ and BF-500++)
● Built-in speaker and collocated with earphone jack
● Alarm for FHR beyond normal range and lower battery capacity
● Standard configuratio of 2.5MHz probe, easy to replace
● Applicable to detect fetal heart heart rate from the twelfth week
● Built in loud speaker with connection to recorder and earphone
● AA battery/9V built in rechargeable battery supporting 8 hour operation
● Big LCD with backlightfor dynamic display of FHR and battery capacity
● Alarm for FHR beyond normal range and lower battery capacity
● Only 250g, can be carried conveniently with a gallus
● Probe of 2.5MHz for accurate detection of FHR
● Two operation mode of real time and average
● AA battery/9V built in rechargeable battery supporting 8 hour operation
● Applicable to detect fetal heart heart rate from the twelfth week
● Built in loud speaker with connection to recorder and earphone
● Automatic power off in 1 minute without any operation
● Low power consumption, 2xAAA battery for 8 hour continuous use
● Compatible with a PC/recorder to record the fetal heart sound
● Particular 2 Headphone Sockets design can let expectant mother
and father hear the fetal heart sound together
● High sensitive doppler probe
● Specially designed for family of pregnant women to
conduct daily detection of FHR by themselves
● Battery energy indication
● The probe and main units integrated together
● Low ultrasound output intensity
Handheld Fetal Doppler ---- Sonoline A
● Two modes as manual mode and heart rate processing mode
● Built-in speaker
Handheld Fetal Doppler ---- F40
● Automatic switch-off
● Delicate and compact design, portable to use
● With slim, power saving and interchangeable ultrasound probe.
● Easy to use
● Auto and manual counting
● Safe and no radiation, probe and main unit ae all in one design
● Alarm function when FHR is out of the normal range
● Home using Fetal Doppler, suitable for the 16 weeks or above
pregnant women at home to kow the fetus healthy situation
● High sensitive doppler probe
● Size of 117x56x31mm
● Big LCD display and two audio output
Handheld Fetal Doppler ---- F20
● Recording and playback, Speak FHR number
● It can be recorded and connected the speaker
● 2xAAA battery of 1.5V
Handheld Fetal Doppler ---- F60
● Home using Fetal Doppler, suitable for the 16 weeks or above
pregnant women at home to kow the fetus healthy situation
● It can be recorded and connected the speaker
● Shipment method: Air, Sea, Road
● High sensitive doppler probe
● Big LCD display and two audio output
● Recording and playback, Speak FHR number
● 2xAAA battery of 1.5V
● Safe and no radiation, probe and main unit ae all in one design
● Alarm function when FHR is out of the normal range
● Size of 110x50x34mm
● Shipment method: Air, Sea, Road
● Audio output for connection with earphone/recorder with audio input
● Meeting routine examination requirement of
obstetricians, midwives, and pregnant women
Optional & Consumable Items
NIBP Cuff SPO2 Sensor
Temperature Probe Disposable Electrode
Bracket Trolley
5 Lead ECG Cable 7 Lead ECG Cable
