Transcript
  • Call us today on 1300 082 646 or visit www.tangohire.com.au

    One Company | One Complete Fluid Solution

    Product Specification Sheet

    Mobile Frac Tank: Single Axle Capacity: Height: Width: Length: Weight:

    68,000litre 2.9m 2.5m 13.9m

    12,700kg

    Appr

    oxim

    ate

    size

    Mobile fluid storage suitable for fracking, hydrotesting, drilling or mining operations

    Advantages ------------------------------------------ 1. Efficiency

    Fast moving with integral hydraulic lifts eliminate need for a winch truck or tilt tray

    8 manifolds allow multiple tanks to be manifolded together for larger jobs

    2. Safety Flip down Australian Compliant Stairs with

    extendable handrails on stairs Fully registered and ADR compliant

    3. Environment 8 Frac manifold with master valve

    provides dual isolation to prevent spills Lift cylinders run off electric motor

    powered by solar panel eliminate need for refuelling a diesel powered hydraulics

    Specifications

    -------------------------------------------------------------------------------------------------------------------------------- Front outlets: 8 Frac Manifold with Master Butterfly valve, 2x 8 Weco Hammer Unions, 2x 4 Camlock outlets with

    Butterfly valves and 2x 4 Weco outlets with Butterfly valves. Multiple tanks can be manifolded together for large frac jobs. Rear outlets: 1x 4 Weco and 1x 4 Camlock outlets. 4 Drain Line to sump allowing cleaning and sucking dry. 1x 4 FMC/Weco style gel/gun line connection with 4 valve in front of tank. Gel line has internal pipe going toward back of

    tank to each compartment to allow rolling of tank. Integral Jost hydraulic lift cylinders allow raising/lowering of tank. Solar power eliminates need for diesel engine on tank All tank seams double welded (on both sides) and continuous Stairs and platform at front of tank - positioned to allow operator to see inside top roof hatch Sight gauge level indicators at side or front of tank Standard 2 ADR kingpin with 3/8 minimum king pin plate Internal coating Carboline 859 (white or light tan colour). Coating compatible with normal frac fluids. All valves to be FMC/Weco style valves, model 12 or 12N, with PTFE/Viton B seals, and nylon coated gate, and other trim

    standard. Valve handles with locking detents at 90 degrees included.

    Safety Features

    -------------------------------------------------------------------------------------------------------------------------------- Road registered and fully Australian ADR compliant design Australian compliant stairs with extendable handrails

    Options

    -------------------------------------------------------------------------------------------------------------------------------- Dual compartment mobile tanks with separate discharge

    manifolds and gun lines available Associated hoses and transfer pumps available High volume Frac Ponds for large volume jobs available

  • One Company | One Complete Fluid Solution

    Fluid Storage & Management

    Mobile & Skidded Frac Tanks Frac Ponds Mobile Flowback Tanks DST Tanks DFIT Tanks

    Agitator Tanks Acid Tanks Dual Skin Tanks Transfer Pumps & Hoses Vacuum Trucks & Fluid Transport

    Drilling & Completion

    Mud Pumps Drill Pipe Pipe Bins

    Well-Test Equipment Flowback Iron Flare Tanks

    Site Infrastructure & Service

    Spill Containment Equipment Potable Water Storage

    Non-Potable Water Storage Trailer Mounted Toilets

    Call us today on 1300 082 646 or visit www.tangohire.com.au

    Tango Oilfield Rental Solutions |www.tangohire.com.au | 1300 082 646 | Tango Oilfield Rental Solutions |www.tangohire.com.au | 1300 082 646


Top Related