Download - MINI DRYER OK NYE.doc
-
7/27/2019 MINI DRYER OK NYE.doc
1/28
PROJECTS PROPOSAL 2009
APPRECIATION
Firstly, thanks to god Allah S.W.T. Finally, we have finished our complete report about
this project called MINI DRYER.
Before proceed to the next chapter and discussing more details about this project. We
would like to thanks to Mr. Nurul Zaidi B. Hj Kasbolah as our supervisor that have give us so
much tips and guiding us to the successful of this project and had been accepted by our juries on
projects proposal presentation before. Besides, we are also thanks to our Seminars Lecturer Mr.
Ahmad Azahan B. Mohamad. There are a lot of comments and critics that always make us
become a better person than yesterday and day by day. Honestly your own style of critism makes
us realize about our past mistake that were always done. Once again, without this two important
guys Mr. Zaidi and Mr. Azahan, we do not think that we can do better than just make a piece of
crap project. Thanks again.
With all your comments, we will adapt it on our project and also for our future life that
involve this kind of things.
Thanks,
MECHATRONIC ENGINEERING Page 1
-
7/27/2019 MINI DRYER OK NYE.doc
2/28
PROJECTS PROPOSAL 2009
ORGANIZATION CHART
SUPERVISOR
MR. NURUL ZAIDI BIN HJ KASBOLAH
GROUPS LEADER
MOHD FIKRI BIN SHAHARANI
(01DEM06F533)
GROUPS MEMBERS
KHAIRUL ALLIF BIN ROSLAN
(01DEM06F059)
ROSMAWATI BINTI AMINUDDIN
(01DEM07F031)
BEH LAI SHENG
(01DEM07F043)
MOHD RIAZ BIN MOHD JASNI
(01DEM07F016)
MOHD IKHSAN BIN ABDUL MUTALIB
(01DEM05F520)
MECHATRONIC ENGINEERING Page 2
-
7/27/2019 MINI DRYER OK NYE.doc
3/28
PROJECTS PROPOSAL 2009
ABSTRACT
This MINI DRYER is a machine that specially designed to help people drying their wet
clothes such as stocking, bra, underpants, tie and others. Besides, this machine is smaller and
more portable compared by usually other washing machine. Its also able to dry small clothes in
around 60-70 percent drying.This machine also allow people to bring it along wherever they
want to go because its so handly. This dryer machines maintenance doesnt involve any high
cost to maintain it in good condition.
MECHATRONIC ENGINEERING Page 3
-
7/27/2019 MINI DRYER OK NYE.doc
4/28
PROJECTS PROPOSAL 2009
CHAPTER 1 : INTRODUCTION
1.1 Introduction
As everyone knows, weather in Malaysia nowadays is so unpredictable. For example,
when raining season comes, theres a lot of problem will affects several people including those
from students and others that using a motorcycle and have to ride along way back home in rain.
This situation will cause their important clothes that need to wear everyday get wet in this
condition. Mini clothes that they need to wear everyday such as tie, stocking, or scarf/tudung,
that are usually didnt need to wash it everyday will get wet. As we all know, several people like
students, didnt have much money to buy that kind of clothes and usually will wear it over and
over again without change it and wash it. So, when there are no more clothes to wear and all
clothes got left was get wet, it will cause problem to them. Thats why this idea is to build or
made a one dryer machine that is compaq and portable and also will be a machine that anyone
can buy especially the students and bachelors that didnt have much money to buy a washing
machine. This simple dryer machine helps the consumer dry their clothes in just a few minutes.
The original concept of this machine, basically takes from blender, washing machine and
thumbler dryer that are using on industries.
Combination of mechanism of thumbler dryer and washing machine.
MECHATRONIC ENGINEERING Page 4
-
7/27/2019 MINI DRYER OK NYE.doc
5/28
PROJECTS PROPOSAL 2009
1.2 Objective
Next, there are some objective will be list out and will be achieve after all the project about this
MINI DRYER finish :
The machine that can dry the simple clothes such as tie, stocking, and others in just an
easy way from the motor that moving fast and spin the spinner will make the all clothes become
dry faster than usually and that can bring along together wherever we go, even in a jungle and
using a right accessories as a power supply to make it work such as generator and etc.
Helping IPTA or IPTS students and also the individual who are just get a job and still in
unstable condition in a term of money and didnt have enough money to buy a washing
machine. This MINI DRYER, cheaper if compare it with others washing machine cause its just a
simple machine and not the complex one.
1.3 Background Problems
As an explanation about previous subtopic that had been discussed, based on introduction
that had been mention before, the background problems that cause to build this projects is
because the condition of weather and as a person itself. We realize that weather in Malaysia
usually is so unstable this lately. Normally nowadays as we can see, rainy seasons come
suddenly without we can predict it. Thats why this machine has been created to help certainpeople and of course, our target is a person who looking for low budget dryer machine and can
bring it along wherever they want to go with easy operational. Besides, with this machine, we
hope that we can change our Malaysian perspective about a better way how to dry the wet
clothes in minimum time. As we know, lot of peoples nowadays that are using old style to dry
their wet clothes using an iron. With this machine, we can dry our wet clothes with a single
button and just sit relaxed and waiting the machine finish the job. Obviously, we can see from
this way of how to drying wet clothes, its better than the old one. It looks more modern and
efficient. Next, the design of this machine are so simple and can bring along with wherever and
also very helpful when in desperate situation or condition like at the jungle and so on.
MECHATRONIC ENGINEERING Page 5
-
7/27/2019 MINI DRYER OK NYE.doc
6/28
PROJECTS PROPOSAL 2009
1.4 Projects Scope
Next will be list out the projects scope. This projects scope is about the target of the
consumer for this project.
Students from IPTA/IPTS that didnt stay at the hostel and live at rented house
that didnt have this kind of service.
For bachelors or graduation that just having a new job and still in unstable finance
condition.
Certain people that dont have enough money to afford a full automatic washing
machine and just looking for low budget dryer machine that are so portable.
Individual that always go for outstation and need to attend important seminar that
always have to change their accommodation.
1.5 Advantages And Disadvantages
1.5.1 Advantages
Drying wet clothes in just a few minutes.
Portable. Can bring along together wherever.
Simple design and can save more space.
Very handly. Only using a few step to operate it.
Easy maintenance because theres no complex structure and electrical circuit.
1.5.2 Disadvantages
Probably the clothes that want to dry using this machine didnt achieve 100% dry. Maybe
this machine just can dry the clothes around 60-70%.
Required intensive care in its inside part.
MECHATRONIC ENGINEERING Page 6
-
7/27/2019 MINI DRYER OK NYE.doc
7/28
PROJECTS PROPOSAL 2009
Unsuitable handled by childrens.
CHAPTER 2 : LITERATURE RESEARCH
2.1 Introduction
This Literature Research will show about researching at this project especially at all part
and component we use at this system. We must to make a complete research because we want to
use a suitable part and component for use at this project and if we have a little research we cant
know what the best component and part we can use this project.
2.2 Domain Introduction
Further will be described on the other hand on literature study has been made about this
project information monitoring. This study made based on some of the ones that were made
whether on the Internet and from that yarn party and dab in field as such. Overall, reference on
this project have surrounded from aspect design, application, and mechanism how it function.
MECHATRONIC ENGINEERING Page 7
-
7/27/2019 MINI DRYER OK NYE.doc
8/28
PROJECTS PROPOSAL 2009
From the figure above this showed cross section for an automatic washing machine
fundamentally. From aspect mechanism movement in this machine drying were taken in help to
produce this Mini Dryer. Design Mini Dryer machine 's original this also already taken based on
of this washing machine.
2.3 Automatic Washing Machine Fundamentally
Like those known, this Mini Dryers machine overall based on of present automatic washing
machine. Most aspects have taken based on of this washing machine, from aspect design,
mechanism movement, concept and others were taken. Further, will be described fundamentally
on mechanism automatic that present washing machine movement:
1. Those clothes want to be washed and is dried and admitted into machine.
2. Machine is start according to clothes quantity and how many clothes included.
3. Machine function with in his beginning motor move by way of something cleaning and
further turn with faster for drying process.4. Those clothes have been completed being washed and dried dropped from machine with
drying average as much as 80%.
MECHATRONIC ENGINEERING Page 8
-
7/27/2019 MINI DRYER OK NYE.doc
9/28
PROJECTS PROPOSAL 2009
shows automatic washing machine cross section fundamentally.
2.4 Component Type Used
In this subtopic, it will be described study of key component part will be applied to into this Mini
Dryer 's machine. Further, explained fundamentally on hardware or key component will be used.
2.5 Motor
After making study motor what suitable to be used, motor washing machine were created choice
because the design is small and more powerful. It even more suitable compared with other
motors a bigger one.
SF- Washing Machine Motor
MECHATRONIC ENGINEERING Page 9
-
7/27/2019 MINI DRYER OK NYE.doc
10/28
PROJECTS PROPOSAL 2009
Specification
ModelRated
voltage(v)
Rated
frequency(Hz)
Rated
power
input(W)
Rated
current(A)
Rated speed of
rotation(RPM)
Electric
capacitynoisedB(/A)
XDT-50 220 50 50 0.6 1350 4 45
2.6 Advantage And Disadvantage In Present Washing Machine
2.6.1 Advantage
Can wash clothes in high quantity.
MECHATRONIC ENGINEERING Page 10
-
7/27/2019 MINI DRYER OK NYE.doc
11/28
PROJECTS PROPOSAL 2009
Can wash a dirty clothes.
2.6.2 Disadvantages Cannot dry the cloth completely.
A machine size is big.
Required a big space.
Higher maintenance cost.
Expensive.
CHAPTER 3 : METADOLOGY PERFORMANCE
3.1 Introduction
MECHATRONIC ENGINEERING Page 11
-
7/27/2019 MINI DRYER OK NYE.doc
12/28
PROJECTS PROPOSAL 2009
After finish describe about the Literatur investigation, the next subtopic is about
Metodology Performance. It is refer to the Literatur Investigation before. Metodology
Performance means that the movement system, structure, entrails mechanism and tools or themain components that use refer to the investigation we do before. Metadology is one method for
a system which translate from the input which given to make a output which we want.
Example of the Mini Dryer Machine base from the washing machine structure and it is smaller
than washing machine and easy to remove it from a place to a place.
3.2 Entrails Mechanism
MECHATRONIC ENGINEERING Page 12
-
7/27/2019 MINI DRYER OK NYE.doc
13/28
PROJECTS PROPOSAL 2009
Structure and the movement mechanism of the machine mostly refer to the washing machine
automatic that we use now. Now will be explained about how the Entrails Mechanism of the
machine with its functions.
1. Clothes that need to dry is put into the Mini Dryer.
2. Switch on the system.
3. Motor of Mini Dryer will start to spin about 5-10 minutes.
4. Mostly the time of the drying or spinning process need to depend to the quality of the
clothes because if have a lot of clothes need to spin, it will take a lot of time.
5. Entrails Mechanism, normally is refer to the drying process of the washing machine.
6. After finish the drying process, clothes will dry in about 60%-70%.
Example of the main components that use in the Mini Dryer Machine.
MECHATRONIC ENGINEERING Page 13
-
7/27/2019 MINI DRYER OK NYE.doc
14/28
PROJECTS PROPOSAL 2009
3.3 MOVEMENT MECHANISM
Clothes that need to dry is put into Mini Dryer.
Switch on the system.
Motor will start to function with the spin that connect to it.
Spinner will spin about 5-10 minutes to evade the water from
the clothes.
Process Mini Dryer finish..
MECHATRONIC ENGINEERING Page 14
Clothes id ready to take out from the Mini Dryer.
-
7/27/2019 MINI DRYER OK NYE.doc
15/28
PROJECTS PROPOSAL 2009
3.4 Tools and Components Used in Mini Dryer
1. Motor AC
2. Spinner (Plastic)
3. Spinner Cover (Plastic)
4. Mild Steel (body of the machine)
5. Aluminium
6. Switch
7. Rubber
8. Motor Circuit
Example of the 3 phase motor circuit that use in washing machine.
MECHATRONIC ENGINEERING Page 15
-
7/27/2019 MINI DRYER OK NYE.doc
16/28
PROJECTS PROPOSAL 2009
CHAPTER 4 : PROJECT DESIGNATION
4.1 INTRODUCTION
In this chapter are elaborate more about the design, the drawing of the project, the circuits
that are related to this project and the operational system of this project. We have to discuss a
few aspect to execute in our project design process to made a decision the suitable design. We
have doing a discussion after a few early idea have investigate and make sure there is no problem
in our project while group present. After we know the problem and the weakness, we have do
some investigation to our project.
Designs can definition as principle scientific, technical information and imagination or
design. Meaning of the word design is;
a) Create
i. To shape something creation.
ii. New (research, science)
iii. Old (to renew)
b) Shape
i. Utilize science and mathematic
ii. Engineering process
iii. Economy
MECHATRONIC ENGINEERING Page 16
-
7/27/2019 MINI DRYER OK NYE.doc
17/28
PROJECTS PROPOSAL 2009
4.2 The Mini Dryer Design
300 mm
500 mm
Side View
MECHATRONIC ENGINEERING Page 17
-
7/27/2019 MINI DRYER OK NYE.doc
18/28
PROJECTS PROPOSAL 2009
280 mm 300 mm
Top View of Spinner
Isometric View
MECHATRONIC ENGINEERING Page 18
-
7/27/2019 MINI DRYER OK NYE.doc
19/28
PROJECTS PROPOSAL 2009
4.3 Specification
Motor spinner
Type single phase
Rated Voltage 220 v
Rated current 0.6 ampere
Rated speed 1350 rpm
Body Mini Dryer
Type Aluminium
High 500 mm
Width 450 mm
Thickness 20 mm
MECHATRONIC ENGINEERING Page 19
-
7/27/2019 MINI DRYER OK NYE.doc
20/28
PROJECTS PROPOSAL 2009
CHAPTER 5 : PART AND COMPONENT
5.1 MOTOR AC SPINNER
An electrical motor in the 1/3 to 3/4 Horse Power range typically powers your washing
machine. These motors require a 220 Volt electrical connection. The washing machine motor is
connected to a set of control switches and safety switches. The control switches allow you to set
the speed and duration of the wash and spin cycles. The safety switches engage to shut themachine off if the lid is opened or the water level is too high. Some machines will also have an
excess vibration cut-off switch.
MECHATRONIC ENGINEERING Page 20
-
7/27/2019 MINI DRYER OK NYE.doc
21/28
PROJECTS PROPOSAL 2009
MOTOR AC FOR SPINNER
5.2 CAPACITOR
A capacitor or condenser is a passive electronic component consisting of a pair of
conductors separated by a dielectric. When a voltagepotential difference exists between the
conductors, an electric field is present in the dielectric. This field stores energy and produces a
mechanical force between the plates. The effect is greatest between wide, flat, parallel, narrowlyseparated conductors.
An ideal capacitor is characterized by a single constant value, capacitance, which is
measured in farads. This is the ratio of the electric charge on each conductor to the potential
difference between them. In practice, the dielectric between the plates passes a small amount of
MECHATRONIC ENGINEERING Page 21
http://en.wikipedia.org/wiki/Passivity_(engineering)http://en.wikipedia.org/wiki/Electronic_componenthttp://en.wikipedia.org/wiki/Electrical_conductorhttp://en.wikipedia.org/wiki/Dielectrichttp://en.wikipedia.org/wiki/Voltagehttp://en.wikipedia.org/wiki/Potential_differencehttp://en.wikipedia.org/wiki/Electric_fieldhttp://en.wikipedia.org/wiki/Energyhttp://en.wikipedia.org/wiki/Capacitancehttp://en.wikipedia.org/wiki/Faradhttp://en.wikipedia.org/wiki/Electric_chargehttp://en.wikipedia.org/wiki/Passivity_(engineering)http://en.wikipedia.org/wiki/Electronic_componenthttp://en.wikipedia.org/wiki/Electrical_conductorhttp://en.wikipedia.org/wiki/Dielectrichttp://en.wikipedia.org/wiki/Voltagehttp://en.wikipedia.org/wiki/Potential_differencehttp://en.wikipedia.org/wiki/Electric_fieldhttp://en.wikipedia.org/wiki/Energyhttp://en.wikipedia.org/wiki/Capacitancehttp://en.wikipedia.org/wiki/Faradhttp://en.wikipedia.org/wiki/Electric_charge -
7/27/2019 MINI DRYER OK NYE.doc
22/28
PROJECTS PROPOSAL 2009
leakage current. The conductors and leads introduce an equivalent series resistance and the
dielectric has an electric field strength limit resulting in abreakdown voltage.
Capacitors are widely used in electronic circuits to block the flow of direct current whileallowing alternating current to pass, to filter out interference, to smooth the output ofpower
supplies, and for many other purposes. They are used in resonant circuits in radio frequency
equipment to select particularfrequencies from a signal with many frequencies.
AC MOTOR CAPACITOR
5.3 BODY (ALUMINIUM)
Aluminium alloys are alloys in which aluminium is the predominant metal. Typical
alloying elements are copper, zinc, manganese, silicon, and magnesium. There are two principalclassifications, namely casting alloys and wrought alloys, both of which are further subdivided
into the categories heat-treatable and non-heat-treatable. About 85% of aluminium is used for
wrought products, for example rolled plate, foils and extrusions. Cast aluminium alloys yield
cost effective products due to the low melting point, although they generally have lowertensile
strengths than wrought alloys. The most important cast aluminium alloy system is Al-Si, where
MECHATRONIC ENGINEERING Page 22
http://en.wikipedia.org/wiki/Leakage_(electronics)http://en.wikipedia.org/wiki/Lead_(electronics)http://en.wikipedia.org/wiki/Equivalent_series_resistancehttp://en.wikipedia.org/wiki/Breakdown_voltagehttp://en.wikipedia.org/wiki/Direct_currenthttp://en.wikipedia.org/wiki/Alternating_currenthttp://en.wikipedia.org/wiki/Power_supplyhttp://en.wikipedia.org/wiki/Power_supplyhttp://en.wikipedia.org/wiki/LC_circuithttp://en.wikipedia.org/wiki/Frequencyhttp://en.wikipedia.org/wiki/Alloyshttp://en.wikipedia.org/wiki/Aluminiumhttp://en.wikipedia.org/wiki/Castinghttp://en.wikipedia.org/wiki/Heat_treatmenthttp://en.wikipedia.org/wiki/Extrudinghttp://en.wikipedia.org/wiki/Tensile_strengthhttp://en.wikipedia.org/wiki/Tensile_strengthhttp://en.wikipedia.org/wiki/Leakage_(electronics)http://en.wikipedia.org/wiki/Lead_(electronics)http://en.wikipedia.org/wiki/Equivalent_series_resistancehttp://en.wikipedia.org/wiki/Breakdown_voltagehttp://en.wikipedia.org/wiki/Direct_currenthttp://en.wikipedia.org/wiki/Alternating_currenthttp://en.wikipedia.org/wiki/Power_supplyhttp://en.wikipedia.org/wiki/Power_supplyhttp://en.wikipedia.org/wiki/LC_circuithttp://en.wikipedia.org/wiki/Frequencyhttp://en.wikipedia.org/wiki/Alloyshttp://en.wikipedia.org/wiki/Aluminiumhttp://en.wikipedia.org/wiki/Castinghttp://en.wikipedia.org/wiki/Heat_treatmenthttp://en.wikipedia.org/wiki/Extrudinghttp://en.wikipedia.org/wiki/Tensile_strengthhttp://en.wikipedia.org/wiki/Tensile_strength -
7/27/2019 MINI DRYER OK NYE.doc
23/28
PROJECTS PROPOSAL 2009
the high levels of silicon (4-13%) contribute to give good casting characteristics. Aluminium
alloys are widely used in engineering structures and components where light weight or corrosion
resistance is required.
Aluminium alloy surfaces will keep their apparent shine in a dry environment due to the
formation of a clear, protective oxide layer. In a wet environment, Galvanic corrosion can occur
when an aluminium alloy is placed in electrical contact with other metals with a more negative
corrosion potential than aluminium.
Aluminium alloy compositions are registered with The Aluminum Association. Many
organizations publish more specific standards for the manufacture of aluminium alloy, including
the Society of Automotive Engineers standards organization, specifically its aerospace standards
subgroups, and ASTM International.
Aluminium Alloy
5.4 PROJECT COSTING
No Description Quantity Price / unit
(RM)
Total
MECHATRONIC ENGINEERING Page 23
http://en.wikipedia.org/wiki/Galvanic_corrosionhttp://en.wikipedia.org/wiki/The_Aluminum_Associationhttp://en.wikipedia.org/wiki/Society_of_Automotive_Engineershttp://en.wikipedia.org/wiki/ASTM_Internationalhttp://en.wikipedia.org/wiki/Galvanic_corrosionhttp://en.wikipedia.org/wiki/The_Aluminum_Associationhttp://en.wikipedia.org/wiki/Society_of_Automotive_Engineershttp://en.wikipedia.org/wiki/ASTM_International -
7/27/2019 MINI DRYER OK NYE.doc
24/28
PROJECTS PROPOSAL 2009
(RM)
1. Motor AC 1 70 70
2. Capacitor 1 5 5
3. Push button 1 20 20
4. Aluminium Alloy 3x6 2 30 60
5. Timer 1 15 15
7. Spinner 1 50 50
8. Others - - 100
TOTAL ( RM ) 320
CHAPTER 6 : CONCLUSION
6.1 Conclusion
MECHATRONIC ENGINEERING Page 24
-
7/27/2019 MINI DRYER OK NYE.doc
25/28
PROJECTS PROPOSAL 2009
In conclusion, the electric element and mechanical have found used from this
project. All the problems have been solved by using the theories that have learned. In
order to finish up this project, we have referred to individuals which is expert in this field.
It make more confidence while doing thing this project. Hope with this project, it may
help the youth to do washing machine job everywhere either if outrange from house. This
is because of our portable washing machine. While project proposal in progress we get a
lot of things about this project. Furthermore, our group gave a lot of commitment and
cooperation one another.
REFERENCE
MECHATRONIC ENGINEERING Page 25
-
7/27/2019 MINI DRYER OK NYE.doc
26/28
PROJECTS PROPOSAL 2009
En Nurul Zaidi Bin Hj Kasbolah, Jabatan Kejuruteraan Mekanikal lecturer,
Politeknik Ungku Omar.
Mr Lim, sales assistant shenheng road white sand
Cik Nadia, Taman Cempaka laundry 's shop assistant.
http://home.howstuffworks.com/how-to-repair-a-washing-machine.htm
http://www.samsung.com
http://en.wikipedia.org/wiki/Washing_machine
http://www.moresales.com.my
http://www.electronicsforu.com/EFYLinux/circuit/sep2003/cir-5-washing.pdf
MECHATRONIC ENGINEERING Page 26
http://home.howstuffworks.com/how-to-repair-a-washing-machine.htmhttp://www.samsung.com/http://en.wikipedia.org/wiki/Washing_machinehttp://www.moresales.com.my/http://www.electronicsforu.com/EFYLinux/circuit/sep2003/cir-5-washing.pdfhttp://home.howstuffworks.com/how-to-repair-a-washing-machine.htmhttp://www.samsung.com/http://en.wikipedia.org/wiki/Washing_machinehttp://www.moresales.com.my/http://www.electronicsforu.com/EFYLinux/circuit/sep2003/cir-5-washing.pdf -
7/27/2019 MINI DRYER OK NYE.doc
27/28
PROJECTS PROPOSAL 2009
ATTACHMENT
PROJECT PLANNING
GHANT CHART
Week
Affair 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Design
Planning
Design
Implementation
Project
Discussion
Problem
Discussion
Doing
Investigation
At Project
Doing A
Modified
Report
Planning
MECHATRONIC ENGINEERING Page 27
-
7/27/2019 MINI DRYER OK NYE.doc
28/28
PROJECTS PROPOSAL 2009
Proposal
Report
Implementation