Download - MEMS Tunable Filter MTF-B Specs Na
DiCon’s MEMS Tunable Filter (Patent Pending) is a compact 2-port device based on DiCon’s proprietary MEMS technology. It de-multiplexes the incoming multi-wavelength signal and selects the desired wavelength channel using a tilting MEMS mirror as the tuning mechanism. The optical design is an extension of DiCon’s proven MEMS switch design, and therefore offers the same dura-bility, reliability, and stability. DiCon’s MEMS Tunable Filter is an ideal component for use in all wavelength selection and monitor-ing applications, and is particularly well-suited for applications requiring frequent or continuous tuning.
Specifi cations subject to change. Copyright © 2007 DiCon Fiberoptics, Inc. All rights reserved.
featureSExcellent MEMS durability, thermal stability, and repeatabilitySuperior optical performanceCompact form factorGaussian-shaped passband100 GHz and 50 GHz channel spacing fi lters offeredCustomized passbands and tuning ranges availableI2C and RS232 control interface included
applicatiOnSOptical Channel Performance MonitoringROADMnoise SuppressionSignal Tracking
ideal component for use in all wavelength selection and monitor-ing applications, and is particularly well-suited for applications requiring frequent or continuous tuning.
memS tunable filter
Optical SpecificatiOnS
mem
S tu
na
ble
filt
erSp
ecif
icat
iOn
S /
Ord
erin
g in
fOrm
atiO
n
DiCon Fiberoptics, Inc. 1689 Regatta Blvd. Richmond, CA 94804 Tel. (510) 620-5000 Fax. (510) 620-4100 www.diconfiberoptics.com
parameter ratingTuning Range 1530 to 1565 nmMin IL (@ Peak)
50GHz < 4.0 dB100 GHz < 3.0 dB
Ban
dwid
th 50 GHz @ 1 dB > 0.12 nm100 GHz @ 1 dB > 0.20 nm50 GHz @ 20 dB < 0.68 nm100 GHz @ 25 dB < 1.40 nm
Back Reflection > 40 dBPDL < 0.3 dBl Setting Error < +/- 30 pmTuning Resolution 10 pmTuning Speed < 30 msOptical Power < 500 mWDurability > 1 billion cyclesOperating Temp -5 to 70 oCStorage Temp -40 to 85 oCFiber Type 9/125 mm single mode
electrical SpecificatiOnSparameter ratingLatching Type non-latchingControl Type I2C and RS232Vcc Voltage 12 VDCPower Consumption < 1.4 WVcc Damage Threshold 15 VDC
mechanical dimenSiOnS(Units: mm)
Ordering infOrmatiOn
memS tunable filter
MTFPackaging Type
B with Control Board
Channel Spacing
Tuning Range
50 50G Hz100 100G Hz
15 1530-1565 nm
Fiber Type
9 9/125 mm single mode fiber
Connector Type
FC FC/SPCFC/ApC FC/ApCn nOnE
Pigtail Length
Jacket Type
1 1 MeterX Specify X Meters
2B 250 mm barefiber
B
Also Available: SC, SC/UPC, SC/APC, ST, ST/UPC, LC
0137A
9 2B
Custom Tuning Range Available Upon Special Request
15
Specifi cations subject to change. Copyright © 2007 DiCon Fiberoptics, Inc. All rights reserved.
Optical SpectrumS
memS tunable filter
memS tunable filter, 50 ghZ
memS tunable filter, 100 ghZ
Spectrum SWeep50 ghZ filter
mem
S tu
na
ble
filt
erO
ptic
al
Spec
tru
m &
per
fOm
an
ce
dat
a
DiCon Fiberoptics, Inc. 1689 Regatta Blvd. Richmond, CA 94804 Tel. (510) 620-5000 Fax. (510) 620-4100 www.diconfi beroptics.com
WaVelength Setting errOr OVer temperature(Sample data)
memS tunable filter
0137A