15-20 (240-320)
MaxMoldableMaxFormMaxSealCoat&MaxModuleCoatShapes
MaxSealCoat™ 2600 is a tacky, putty-likematerial that can be used to repair hot face modulelinings for temperatures that exceed 2400°F.This product can be applied into refractory jointsand cracks as a seal or for hot spot repair.MaxSealCoat™ 2600 can also be used in applications with high velocity or mechanical abuse.The product can be pumped onto the surface orapplied with a trowel. After drying, the product willharden on the surface of the fiber with low shrinkage.
Brown Gray2600 (1425)2420 (1325) 2450 (1315)2100 (1148)
2300 (1260)
454376 - 82 (1218 - 1314) 80 (1282)30 - 36 (481 - 577)
1.2%@2450°F (1345°C)2.8%@2600°F (1426°C)35 (561)30 - 35 (481-561)
40 - 4250 - 52
*6 month shelf life
MaxSealCoat(2600)MaxMoldable (2300) MaxModuleCoat(2600)
MaxMoldable™ is a multipurpose productmanufactured from a blend of alumina-silica fibersand binders. Moldable is a tacky, putty-like materialthat adheres to ceramic wools and refractorymaterial.
MaxMoldable™ is used to prevent heatloss caused by the deterioration of existing linings.MaxMoldable™ can also be used to fill cracks or as a seal.This product can be installed by using a trowel or acaulking gun.
Low Shrinkage at High TemperaturesModule Lining RepairLow Heat StorageHigh Velocity ResistanceAdheres to Ceramic and Refractory MaterialsExcellent Corrosion ResistanceEasy to install
MaxModuleCoat™ is a product that can be used torepair furnace linings using modules or blanket.This is a tacky-putty like material that can be usedin temperatures up to 2450°F with very lowshrinkage (1.2 %). This product is ideal for fillingshrinkage cracks for modules or to patch blanketlinings. The product can be applied to furnace liningwith a hand trowel or with a pneumatic pump.
MaxForm™ Shapes are processed
MaxForm™ Shapes are vacuum
MaxForm™ Shapes are available
3000 HT
3000 (1650)
2700 (1482)
3400 (1871)
9 - 12 (144-224)
54 - 5841 - 45
1
20-28 (320-448)
lbs./ft3 (kg/m3) lbs./ft3 (kg/m3)
lbs./ft3 (kg/m3)
