Download - Materials handling
![Page 1: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/1.jpg)
Material Handling
![Page 2: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/2.jpg)
Material handling is the function of moving the right material to the right place in the right time, in the right amount, in sequence, and in the right condition to minimize production cost. The cost of MH estimates 20-25 % of total
manufacturing labor cost in the United States [The Material Handling Industry of America (MHIA)]
![Page 3: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/3.jpg)
Material Handling Objectives
A. Reduce Unit Material Handling CostEliminate Unnecessary HandlingHandle Material in Batch LotsMinimize Required Handling TimeReplace Handling Equipment as Appropriate B. Reduce Production TimeMinimize Delays of Machine OperationsMaintain Uniform, Appropriate Movement of
MaterialUse Automatic Processing When Appropriate
![Page 4: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/4.jpg)
Material Handling Objectives
C. Reduce OverheadMinimize Non-Productive LaborPrevent Damage to MaterialsCoordinate All Material Handling Systems
D. Conserve Floor SpaceAvoid Excessive Stock StorageMove Materials in a Position to Save SpaceUse Equipment Requiring No Floor Space E. Prevent AccidentsReduce Physical Load RequiredInsure Handling Equipment is Safe F. Improve Employee MoraleProvide Proper Relationship Between Employee & Work
![Page 5: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/5.jpg)
The primary goal is to reduce unit costs of production
Maintain or improve product quality, reduce damage of materials
Promote safety and improve working conditions Promote productivity
material should flow in a straight line use gravity! It is free power move more material at one time mechanize material handling automate material handling
![Page 6: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/6.jpg)
Promote increased use of facilities Reduce tare weight (dead weight) Control inventory
![Page 7: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/7.jpg)
Material handling equipment includes: Transport Equipment: industrial trucks,
Automated Guided vehicles (AGVs), monorails, conveyors, cranes and hoists.
Storage Systems: bulk storage, rack systems, shelving and bins, drawer storage, automated storage systems.
Unitizing Equipment: palletizers Identification and Tracking systems
![Page 8: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/8.jpg)
1. Material Characteristics
Category Measures
Physical state
Size
Weight
Shape
Condition
Safety risk and risk of damage
Solid, liquid, or gas
Volume; length, width, height
Weight per piece, weight per unit volume
Long and flat, round, square, etc.
Hot, cold, wet, etc.
Explosive, flammable, toxic; fragile, etc.
![Page 9: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/9.jpg)
2. Flow rate
Manual handlingHand trucks
Powered trucksUnit load AGV
Conveyors ConveyorsAGV trainHigh
Low
LongShort Move Distance
Quantity of material moved
![Page 10: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/10.jpg)
3. Plant LayoutLayout Type Characteristics Typical MH Equipment
Fixed – position
Process
Product
Large product size, low production rate
Variation in product and processing, low and medium production rates
Limited product variety, high production rate
Cranes, hoists, industrial trucks
Hand trucks, forklift trucks, AGVs
Conveyors for product flow, trucks to deliver components to stations.
![Page 11: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/11.jpg)
1. The Planning Principle Large-scale material handling projects usually
require a team approach. Material handling planning considers every
move, every storage need, and any delay in order to minimize production costs.
The plan should reflect the strategic objectives of the organization as well as the more immediate needs.
Principles of Material Handling
![Page 12: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/12.jpg)
2. The systems principle: MH and storage activities should be fully integrated to form a coordinated, operational system that spans receiving, inspection, storage, production, assembly, …, shipping, and the handling of returns. Information flow and physical material flow
should be integrated and treated as concurrent activities.
Methods should be provided for easily identifying materials and products, for determining their location and status within facilities and within the supply chain.
![Page 13: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/13.jpg)
3. Simplification principle simplify handling by reducing, eliminating,
or combining unnecessary movement and/or equipment.
Four questions to ask to simplify any job: Can this job be eliminated? If we can’t eliminate, can we combine
movements to reduce cost? (unit load concept)
If we can’t eliminate or combine, can we rearrange the operations to reduce the travel distance?
If we can’t do any of the above, can we simplify?
![Page 14: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/14.jpg)
4. Gravity principle Utilize gravity to move material whenever
practical.
5. Space utilization principle The better we use our building cube, the
less space we need to buy or rent. Racks, mezzanines, and overhead
conveyors are a few examples that promote this goal.
![Page 15: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/15.jpg)
6. Unit load principle Unit loads should be appropriately sized
and configured at each stage of the supply chain.
The most common unit load is the pallet cardboard pallets plastic pallets wooden pallets steel skids
![Page 16: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/16.jpg)
7. Automation principle MH operations should be mechanized
and/or automated where feasible to improve operational efficiency, increase responsiveness, improve consistency and predictability, decrease operating costs.
ASRS is a perfect example.
![Page 17: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/17.jpg)
8.Equipment selection principle Why? What? Where? When? How? Who? If we answer these questions about each
move, the solution will become evident.
9.The standardization principle standardize handling methods as well as
types and sizes of handling equipment too many sizes and brands of equipment
results in higher operational cost. A fewer sizes of carton will simplify the
storage.
![Page 18: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/18.jpg)
10. The dead weight principle Try to reduce the ratio of equipment weight to product
weight. Don’t buy equipment that is bigger than necessary.
Reduce tare weight and save money.
11. The maintenance principle Plan for preventive maintenance and scheduled repairs
of all handling equipment. Pallets and storage facilities need repair too.
12. The capacity principle use handling equipment to help achieve desired
production capacity i.e. material handling equipment can help to maximize
production equipment utilization.
![Page 19: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/19.jpg)
A punch press can cycle every 0.03 minute, but our time standard for manually loading and unloading this press is only 300 pieces per hour.
Press capacity = 60 min / 0.03 = 2000 pieces/hr
Utilization = 300 / 2000 = 15%
Should we buy a new press? If we can purchase a coil-feeding material handling
system, we could approach 100% press utilization.
![Page 20: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/20.jpg)
![Page 21: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/21.jpg)
Conveyors
![Page 22: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/22.jpg)
Large Conveyors (2 axis)
![Page 23: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/23.jpg)
Lifts
![Page 24: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/24.jpg)
Chutes
![Page 25: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/25.jpg)
AdvantagesDisadvantages1. More economical if large
volume of material moved to same place
2. One power supply to drive entire “belt” – more economical
3. Reduction in need for lot identification tags
4. Can be used to pace the workers
1. Less economical if material follows diverse paths
![Page 26: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/26.jpg)
![Page 27: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/27.jpg)
Cranes
![Page 28: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/28.jpg)
Tracks - Monorail
![Page 29: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/29.jpg)
Advantages Disadvantages
1. Can cover a wider area1. Still limited to area covered
![Page 30: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/30.jpg)
![Page 31: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/31.jpg)
Lift truckComputer Controlled Truck
![Page 32: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/32.jpg)
Advantage Disadvantage
1. Flexible 1. Must have portable power supply with each piece of equipment
![Page 33: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/33.jpg)
![Page 34: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/34.jpg)
![Page 35: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/35.jpg)
35
Materials Handling, Storage, Use, and Disposal
![Page 36: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/36.jpg)
Involves diverse operations:
Manual material handling Carrying bags or materials Unpacking materials
Material handling via machine Forklift Crane Rigging
Stacking or storing drums, barrels, kegs, lumber, loose bricks or other materials
36
![Page 37: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/37.jpg)
37
Injuries
Lifting objects is a major cause of back injuries in the work place
Improper storing and handling of material and equipment can cause struck by and crushed by injuries
![Page 38: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/38.jpg)
Improper manual lifting or carrying loads that are too large or heavy
Being struck by materials or being caught in pinch points
Crushed by machines, falling materials or improperly stored materials
Incorrectly cutting ties or securing devices
38
![Page 39: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/39.jpg)
Seek help:• When a load is too bulky to properly grasp or lift • When you can’t see around or over the load• When you can’t safely handle the load
Attach handles to loads to reduce the chances of getting fingers smashed.
39
![Page 40: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/40.jpg)
Break load into partsGet help with heavy or bulky itemsLift with legs, keep back straight, do not twistUse handling aids - such as steps, trestles, shoulder pads, handles, and wheelsAvoid lifting above shoulder level
40
![Page 41: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/41.jpg)
What should be taught:• How to lift safely• How to avoid unnecessary
physical stress and strain• What you can comfortably
handle without undue strain
• Proper use of equipment• Recognizing potential
hazards and how to prevent / correct them
41
![Page 42: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/42.jpg)
For loads with sharp or rough edges, wear gloves or otherhand and forearm protection
When loads are heavy or bulky, wear steel-toed safety shoes toprevent foot injuries if the loadis dropped
42
![Page 43: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/43.jpg)
Employees must be trained in the proper use and limitations of the equipment they operate
This includes knowing how to effectively use equipment such as forklifts, cranes, and slings
43
![Page 44: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/44.jpg)
Center the load on the forks and as close to the mast as possible to minimize the potential for the truck tipping or load falling Overloading a lift truck makes it hard to control and could make it tip overPlace the load at the lowest position for travelingDon’t place extra weight on the rear of a counterbalanced forklift to allow an overload
44
![Page 45: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/45.jpg)
Keep arms and legs inside the truckHandle only stable loadsKeep speed low - you may have to stopBe careful when making sharp turnswith a raised loadIf a load blocks your view, travel in reverseNo riders, unless there’s an approved seatDon’t drive with forks raisedWear safety belts or other restraint devices
45
![Page 46: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/46.jpg)
• Truck-related topics• Workplace-related topics• Standard requirements• Trainees must be
supervised by a competent person and not endanger others
• Formal instruction• Practical training• Evaluation of
performance
46
![Page 47: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/47.jpg)
Dock boards must
have handholds, or
other effective means
for safe handling.
47
![Page 48: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/48.jpg)
Scrapers, loaders, crawler or wheel tractors, bulldozers, off-highway trucks, graders, tractors
Provide seat belts
Equipment with an obstructed rear view can’t be used in reverse unless the equipment has a signal alarm
48
![Page 49: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/49.jpg)
Check the load chart in the cab
Frequently inspect
Never lift people
Check overhead power lines
Ensure area of travel is clear
49
![Page 50: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/50.jpg)
50
Rigging Equipment Slings
Types of slings covered are those made from alloy steel chain, wire rope, metal mesh, natural or synthetic fiber rope, and synthetic web.
Chain Wire rope Metal mesh Synthetic
![Page 51: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/51.jpg)
51
Inspect slings:
Each day before use
Where service conditions warrant
Remove them from service ifdamaged or defective
![Page 52: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/52.jpg)
52
Remove From Service
Immediately remove damaged or defective slings from service
![Page 53: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/53.jpg)
53
Adapts to shape of the load
Can damage by sudden shocks
Best choice for hoisting very hot materials
Must have an affixed tag stating size, grade, rated capacity, and sling manufacturer
Alloy Steel Chains
![Page 54: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/54.jpg)
54
Markings Alloy Steel Chain
It must be marked with grade or manufacturer's mark
![Page 55: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/55.jpg)
55
Hooks, rings, oblong links, or other attachments, when used with alloy steel chains, must have a rated capacity at least equal to that of the chain
Alloy Steel Chain AttachmentsRated Capacity
![Page 56: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/56.jpg)
56
Job or shop hooks and links, or makeshift fasteners, formed from bolts, rods, etc., or other such attachments, can’t be used
Unsuitable Alloy Steel Chain Attachments
Right Wrong
![Page 57: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/57.jpg)
57
Chain Wear
When a chain shows excessive wear, or is cracked or pitted, remove it from service
Non-alloy repair links can not be used
![Page 58: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/58.jpg)
Used to hoist materials
Selection considerations: strength ability to bend without cracking ability to withstand abrasive wear ability to withstand abuse
58
Wire rope
Strand
Center
WireCore
![Page 59: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/59.jpg)
Eye splices made in any wire rope must have at least three full tucks
59
![Page 60: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/60.jpg)
60
Cover or blunt protruding ends of strands
Protruding Ends
![Page 61: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/61.jpg)
61
Wire Rope Clips
When using U-bolt wire rope clips to form eyes, ensure the "U" section is in contact with the dead end of the rope
This is the correct method
Dead End
![Page 62: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/62.jpg)
62
Lubrication
Regularly lubricate ropes and chains
![Page 63: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/63.jpg)
63
Wire Rope Slings Remove From Service
If these happen, remove the wire rope sling from service
Crushing
KinkingBird Caging
![Page 64: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/64.jpg)
Mark or code to show: Name or trademark
of manufacturer Rated capacities
for the type of hitch
Type of material
64
![Page 65: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/65.jpg)
Fittings must be: At least as strong
as that of the sling
Free of sharp edges that could damage the webbing
65
![Page 66: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/66.jpg)
Stitching is the only method allowed to attach end fittings to webbing, or to form eyes
66
Stitching
![Page 67: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/67.jpg)
Remove from service if any of these are present: Acid or caustic burns Melting or charring of
any part Snags, punctures, tears
or cuts Broken or worn stitches Distortion of fittings
67
Heat Damage
![Page 68: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/68.jpg)
68
Storing Materials
Secure materials stored in tiers by stacking, racking, blocking, or interlocking to prevent them from falling
Post safe load limits of floors
Keep aisles and passageways clear
![Page 69: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/69.jpg)
Don’t store noncompatible materials together
In buildings under construction, don’t place stored materials within 6 feet of a hoistway or floor opening
69
![Page 70: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/70.jpg)
70
Employees who work on stored materials in silos, hoppers, or tanks, must be equipped with lifelines and harnesses
Fall Protection
![Page 71: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/71.jpg)
Stack bricks in a manner that will keep them from falling
Do not stack them more than 7 feet high
Taper back a loose brick stack after it is 4 feet high
71
![Page 72: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/72.jpg)
Remove nails before stacking
Stack on sills
Stack lumber so that it is stable and self supporting
72
![Page 73: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/73.jpg)
73
Housekeeping
Keep storage areas free from accumulated materials that cause tripping, fires, or explosions, or that may
contribute to harboring rats and pests
![Page 74: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/74.jpg)
Use an enclosed chute when you drop material more than 20 feet outside of a building
If you drop debris through holes in the floor without chutes, enclose the drop area with barricades
74
![Page 75: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/75.jpg)
75
Remove all scrap lumber, waste material, and rubbish from the immediate work area as work progresses
Keep all solvent waste, oily rags, and flammable liquids in fire resistant covered containers until removed from worksite
![Page 76: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/76.jpg)
Openings must be less than 25 percent of the whole floor
Floors weakened or made unsafe by demolition must be shored so they can safely carry the demolition load
76
![Page 77: Materials handling](https://reader033.vdocuments.site/reader033/viewer/2022061221/54bccc1f4a7959e8388b456b/html5/thumbnails/77.jpg)
Manually handling materials When lifting objects, lift with your legs, keep your back
straight, do not twist, and use handling aids
Using cranes, forklifts, and slings to move materials
Watch for potential struck by and crushed by dangers For slings, check their load capacity, inspect them, and
remove them from service when they display signs of stress or wear
Also - Keep work areas free from debris and materials Store materials safely to avoid struck by/crushed by
hazards
77