-
Ope
rato
r’s M
anua
l
Operator’s Manual
THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF MASSEY HARRIS MASSEY FERGUSON OR IT’S SUCCESSORS. MASSEY HARRIS MASSEY FERGUSON AND IT’S SUCCESSORS
ARE NOT RESPONSIBLE FOR THE QUALITY OR ACCURACY OF THIS MANUAL.
TRADE MARKS AND TRADE NAMES CONTAINED AND USED HEREIN ARE THOSE OF OTHERS, AND ARE USED HERE IN A DESCRIPTIVE SENSE TO REFER TO THE PRODUCTS OF OTHERS.
MF200 Loader
MH-O-MF200LDR
http://www.jensales.com/products/massey-ferguson-200-loader-attachment-operators-manual.html
-
MASSEY-FERGUSON
http://www.jensales.com/products/massey-ferguson-200-loader-attachment-operators-manual.html
-
INDEX
CONTROLS.
OPERATION.
LIQUID-FILLING TIRES . .
LUBRICATION AND MAINTENANCE
SERVICING .
TROUBLE-SHOOTING
ACCESSORIES . .
SPECIFICATIONS.
INTRODUCTION
Page1
2
3
7
9
.10
... 13
. . 14
The MF 200 Loader with the Four-Bar Linkage is a versatile tractor-mounted unit,which can be used for various applications. It is designed to match the power and per-formance of your tractor. It is built of the finest materials available and is a productof well known manufacturers whose high technical skills, modern manufacturingfacilities and experience have made them a leader in the field. With prop·er care andmaintenance, it should give you many years of dependable service.
LOADER IDENTIFICATION
Each loader is "identified by. a Serial Number.
It is important that you refer to this serial number when ordering parts or attach-ments, or when requesting service.
This practice will ensure prompt, accurate service for your loader.
We suggest that you write the serial number in the space provided and keep thisbook handy for referring to these numbers.
7 Loader Serial Nu~ber
Massey-Fer-guson reserves the right to make changes or add improvements at any time without incurring any obligation to make changes onmachines sold previously.
http://www.jensales.com/products/massey-ferguson-200-loader-attachment-operators-manual.html
-
SERVICING
llegular maintenance and efficient service are essential to long service life on yourMF 200 Loader.
Rely on your Massey-Ferguson Dealer for major service repairs, such as thevalve, pump and cylinders.
Fig. 18 - Servicing Oil Filter- 1. Reservoir 2. Ora in Plug 3. Fi Iter Bolt 4. Fi Iter Base
SERVICING THE OIL FILTER
1. Place a clean 5-gallon container beneaththe oil reservoir, No.1, Fig. 18, and removethe drain plug, No.2,. Fig. 18.
. 2. Remove the bolt, No.3, Fig. 18, and theassembly, No~ 4, Fig. 18, being sure to re-tain all the gaskets and "0" -rings.
3. Clean all parts, including the filter head.
4. Reassemble, using a new filter elementkit, being sure to replace all gaskets and "0"-rings included in the kit. See Fig. 19.
5. Torque the bolt, No.3, Fig. 18, to 12ft. -lbs., being sure all "0" -rings and gasketsare in place.
6. Refill reservoir to full mark on dipstickwith type "A" automatic transmission oil.
SERVICING THE AIRBREATHER/CLEANER
The air breather/cleaner, Fig. 17, should becleaned every 60 hours, or more often in ex-tremely dirty or dusty conditions.
9
http://www.jensales.com/products/massey-ferguson-200-loader-attachment-operators-manual.html
-
SPECIFICATIONS
Shipping Weight (less bucket). . . . . . . . . . . 935 lbs.
Counterweight (accessory). . . Wheel weights availableFront bumper weights - when loader is
used on 2135, 3165, 35 and 65 Utility Tractors
Buckets. . . . . . . . . . . . . . . . . Listed under "Accessoriestf
Lifting Capacity - Full Height Calculated . 2700 lbs. (approximate) with2-1/4" diameter lift cylinders
3300 Ibs. (approximate) with 2-1/2" diameterself-leveling lift cylinders
Carrying Capacity at 3 Ft. Height (calculated) . . . . . . 3400 lbs. approximate with2-1/4" diameter lift cylinders
4200 lbs. approximate with 2-1/2" diameterself-leveling lift cylinders
Break-Away Capacity (calculated) Ground Level . . . . 4300 lbs. (approximate) with2-1/4" diameter lift cylinders
5300 lbs. (approximate) with 2-1/2" diameterself-leveling lift cylinders
Maximum Clearance at Maximum He.ight . 9 feet, 11 inches
Reach at Maximum Height (measured from extremefront of tractor with bucket dumped at 480 ). • • •
Clearance, Bucket Dump at 480 ••••••••
Reach, Bucket on Ground(measured from centerline of front wheels) .
Bucket Roll-Back (at ground level)..
Maximum Dumping Angle. .
Digging Depth Capacity. . .
21-1/2 inches
. ... 98 inches
. .. 73 inches
. 37 degrees
. 48 degrees
. 4 inches
14
Turning Clearance Circle
Cycle Time Up . .
Cycle Time Down ..
Bucket Dumping Time
HYDRAULIC SPECIFICATIONS:
Pump Type and Capacity. . .
32 feet diameter with 48 inch bucket
. 4 seconds without self-level5 seconds with self-level
3 seconds
2.5 seconds
Gear pump rated at 17 gpm@ 2000 rpm @2150 psi
http://www.jensales.com/products/massey-ferguson-200-loader-attachment-operators-manual.html