Manufacture of Structural Metal Products 2017
Manufacture of Structural Metal Products
Manufacture of Structural Metal Products
Manufacture of Structural Metal Products4
Abdulaziz bin Nasser al-KhalifaCEO
According to the Ministry of Development Planning and Statistics data, this sector had 558 manufacturing establishments that together employed a workforce of 27,398 personnel in 2015.
Manufacture of Structural Metal Products 5
The gross value added by the sector grew by 18.8 times from QAR149mn in 2001 to QAR2,812mn in 2015.
“ Small and medium-sized enterprises (SMEs) are essential enablers of Qatar’s aspiration to build a diversified and sustainable economy. As the private sector development arm of the Government, we hold our national strategic development agenda – Qatar National Vision 2030 – central to all of our endeavors. We hold a firm belief that it is our core responsibility to contribute to the ongoing efforts of diversifying our sources of national income and creating a knowledge-based economy. We always knew that in order to chart the type of progressive economic and social path envisioned by our State, we need to become imaginative and proactive in our approach for our future generations.
In doing so, QDB’s role is not limited to financing enterprises, as it provides SMEs and entrepreneurs with a wide range of non-financial services. Our ultimate objective is to become a “partner of first resort” for Qatar’s current and future entrepreneurs and SMEs. Thus, we realized that one of the most important ways to achieve our aspiration is through enabling access to granular market insights and trends, which is a pre-requisite for strong business ventures.
In line with our above objectives to establish a reliable data and analysis, and in order to extend a meaningful support to Qatari entrepreneurs and SMEs, QDB intends to publish a series of reports on potential opportunities available across various sectors in the local market. These series aim to provide entrepreneurs with potential opportunities and perspectives about these sectors, including competitive sectorial landscape and data about existing companies.
This report covers the manufacture of structural metal products in Qatar. This sector comprises product segments, such as structural steel fabrication, pre-engineered buildings, pre-fabricated buildings, architectural steel fabrication and architectural aluminum fabrication. According to the latest statistics published by the Ministry of Development Planning and Statistics (MDPS) in 2016, the domestic production of this sector was valued at QAR6,424mn arising from 558 establishments that employed 27,398 personnel in 2015. The gross value added by the structural metal product sector grew by 18.8 times from QAR149mn in 2001 to an estimated QAR2,812mn in 2015.
All product segments in this sector are driven by the construction and infrastructure sectors, and therefore, are likely to witness substantial demand due to the pipeline of upcoming projects.
I invite readers to go through the report and know more about the sector prospects.
Abdulaziz bin Nasser al-KhalifaCEO
CEO’s Message
6 Manufacture of Structural Metal Products
Table of contents
6 Manufacture of Structural Metal Products
CEO’s Message ......................................................... 5
Table of Contents ..................................................... 7
List of Charts ............................................................. 9
List of Tables............................................................ 13
List of Figures .......................................................... 14
List of Abbreviations ............................................... 16
Executive Summary ............................................... 18
1. Introduction ........................................................ 22
1.1. Sector Overview ............................................... 22
1.2. HS Codes of Product Segments ..................... 30
1.3. Raw Materials .................................................. 33
2. Structural Steel Fabrication .............................. 38
2.1. Qatar Market Overview ................................... 38
2.2. Critical Success Factors ................................... 54
2.3. Outlook ............................................................. 55
3. Pre-engineered Buildings .................................. 56
3.1. Overview of PEBs ............................................. 56
3.2. Qatar PEB Market Analysis ............................. 59
3.3. Critical Success Factors ................................... 71
3.4. Outlook ............................................................. 72
7Manufacture of Structural Metal Products
Table of contents
Manufacture of Structural Metal Products 7
4. Pre-fabricated Buildings ..................................... 74
4.1. Qatar Market Overview ................................... 74
4.2. Critical Success Factors ................................... 98
4.3. Outlook ............................................................. 99
5. Architectural Steel Fabrication ....................... 100
5.1. Qatar Market Overview ................................. 100
5.2. Critical Success Factors ................................. 142
5.3. Outlook ........................................................... 143
6. Architectural Aluminum Fabrication ............... 144
6.1. Qatar Market Overview ................................. 144
6.2. Critical Success Factors ................................. 173
6.3. Outlook ........................................................... 174
7. References ......................................................... 176
8 Manufacture of Structural Metal Products
Chart 1. Qatar's Structural Steel Fabrication Demand, 2001 to 2015 ................................................................................................... 39
Chart 2. Structural Steel Fabrication Market Segmentation, 2015 ........................................................................................................ 39
Chart 3. Qatar’s Structural Steel Fabrication Demand Forecast, 2015 to 2026 .................................................................................... 40
Chart 4. Qatar’s Structural Steel Fabrication Market Structure and Capacity Utilization .................................................................... 41
Chart 5. Qatar’s Structural Steel Fabrication Imports, 2001 – 2015 ....................................................................................................... 44
Chart 6. Structural Steel Fabrication Imports by Products, 2015 ........................................................................................................... 45
Chart 7. Qatar’s Structural Steel Fabrication Exports, 2001 – 2015 ....................................................................................................... 45
Chart 8. Structural Steel Fabrication Exports by Products, 2015 ........................................................................................................... 46
Chart 9. Key Sources of Structural Steel Fabrication Imports, 2010 to 2015 ........................................................................................ 46
Chart 10. Key Destinations for Structural Steel Fabrication Exports, 2010 to 2015 ............................................................................. 47
Chart 11. Qatar’s Structural Steel Fabrication Imports v/s Domestic Sales, 2001 – 2015 .................................................................... 48
Chart 12. Qatar’s Structural Steel Fabrication Import Forecast, 2015 to 2026 ..................................................................................... 48
Chart 13. Qatar’s Structural Steel Fabrication Export Forecast, 2014 to 2026 ...................................................................................... 49
Chart 14. Qatar’s Structural Steel Fabrication Demand-Supply Analysis, 2014 to 2026 ...................................................................... 49
Chart 15. Qatar’s Structural Steel Fabrication Selling Prices Forecast, 2014 to 2026 .......................................................................... 51
Chart 16. Qatar’s PEB Demand, 2001 - 2015 ........................................................................................................................................... 59
Chart 17. PEB Market Segmentation, 2015 ............................................................................................................................................. 59
Chart 18. Qatar’s PEB Demand Forecast, 2014 to 2026 ......................................................................................................................... 60
Chart 19. Qatar’s PEB Production Capacity and Utilization ................................................................................................................... 61
Chart 20. Qatar’s PEB Market Share of Key Players, 2015 ...................................................................................................................... 61
Chart 21. Qatar’s PEB Imports, 2001 - 2015 ............................................................................................................................................. 63
Chart 22. Qatar’s PEB Exports, 2001 - 2015 ............................................................................................................................................. 63
Chart 23. Key Sources of PEB’s Imports, 2010 - 2015.............................................................................................................................. 64
Chart 24. Key Destinations of PEB’s Exports, 2010 - 2015 ...................................................................................................................... 64
Chart 25. Qatar’s PEB Imports Vs Domestic Sales, 2001 - 2015 ............................................................................................................. 65
Chart 26. Qatar’s PEB Imports Forecast, 2015 - 2026 ............................................................................................................................. 66
Chart 27. Qatar’s PEB Exports Forecast, 2014 to 2026 ........................................................................................................................... 66
Chart 28. Qatar’s PEB Demand-Supply Analysis, 2015 to 2026 ............................................................................................................. 67
Chart 29. Qatar’s PEB Selling Prices Forecast, 2014 to 2026 .................................................................................................................. 68
Chart 30. Pre-fabricated Buildings Market Segmentation, 2015 ........................................................................................................... 74
Chart 31. Qatar’s Pre-fabricated Labor Accommodation Demand, 2001 - 2015 .................................................................................. 76
Chart 32. Qatar’s Pre-fabricated Labor Accommodation Demand Forecast, 2015 to 2026 ................................................................ 77
Chart 33. Qatar’s Pre-fabricated Labor Accommodation Imports, 2001 - 2015 ................................................................................... 77
Manufacture of Structural Metal Products 9
List of charts
Chart 34. Qatar’s Pre-fabricated Labor Accommodation Exports, 2001 - 2015.................................................................................... 78
Chart 35. Key Sources of Pre-fabricated Labor Accommodation Imports, 2010 to 2015 .................................................................... 78
Chart 36. Key Destinations of Pre-fabricated Labor Accommodation Exports, 2010 to 2015 ............................................................ 79
Chart 37. Qatar’s Pre-fabricated Labor Accommodation Imports Vs Domestic Sales, 2001 - 2015 ................................................... 79
Chart 38. Qatar’s Pre-fabricated Labor Accommodation Import Forecast, 2015 - 2026 ..................................................................... 80
Chart 39. Qatar’s Pre-fabricated Labor Accommodation Export Forecast, 2015 to 2026 ................................................................... 81
Chart 40. Qatar’s Pre-fabricated Labor Accommodation Selling Prices Forecast, 2015 to 2026 ........................................................ 81
Chart 41. Qatar's Pre-fabricated Private Units Demand, 2001 - 2015 ................................................................................................... 82
Chart 42. Pre-fabricated Private Units Segmentation, by Volume: Domestic, 2015 ............................................................................ 83
Chart 43. Qatar’s Pre-fabricated Private Units Demand Forecast, 2015 to 2026 .................................................................................. 83
Chart 44. Qatar’s Pre-fabricated Private Units Imports, 2001 - 2015 ..................................................................................................... 84
Chart 45. Qatar’s Pre-fabricated Private Units Exports, 2001 - 2015 ...................................................................................................... 84
Chart 46. Key Sources of Pre-fabricated Private Units Imports, 2010 to 2015 ...................................................................................... 85
Chart 47. Key Destinations of Pre-fabricated Private Units Exports, 2010 to 2015 .............................................................................. 85
Chart 48. Qatar’s Pre-fabricated Private Units Imports Vs Domestic Sales, 2001 - 2015 ..................................................................... 86
Chart 49. Qatar’s Pre-fabricated Private Units Import Forecast, 2015 to 2026 ..................................................................................... 87
Chart 50. Qatar’s Pre-fabricated Private Units Export Forecast, 2015 to 2026 ..................................................................................... 87
Chart 51. Qatar’s Pre-fabricated Private Units Selling Prices Forecast, 2015 to 2026 .......................................................................... 88
Chart 52. Qatar's Pre-fabricated Greenhouse Demand, 2001 - 2015 .................................................................................................... 88
Chart 53. Qatar’s Pre-fabricated Greenhouse Demand Forecast, 2015 to 2026 .................................................................................. 89
Chart 54. Qatar’s Pre-fabricated Greenhouse Imports, 2001 - 2015 ...................................................................................................... 89
Chart 55. Key Sources of Pre-fabricated Greenhouse Imports, 2010 to 2015 ...................................................................................... 90
Chart 56. Qatar’s Pre-fabricated Greenhouse Imports Vs Domestic Sales, 2001 - 2015 ...................................................................... 90
Chart 57. Qatar’s Pre-fabricated Greenhouse Import Forecast, 2015 to 2026 ..................................................................................... 91
Chart 58. Qatar’s Pre-fabricated Greenhouse Selling Prices Forecast, 2015 to 2026 .......................................................................... 91
Chart 59. Qatar’s Pre-fabricated Buildings Market Structure and Capacity Utilization ....................................................................... 92
Chart 60. Qatar’s Pre-engineered Buildings Demand-Supply Analysis, 2015 to 2026 ......................................................................... 94
Chart 61. Architectural Steel Fabrication Market Segmentation, 2015 ............................................................................................... 100
Chart 62. Qatar’s Entrance Gates Demand, 2001 - 2015 ...................................................................................................................... 101
Chart 63. Entrance Gates Market Segmentation, 2015 ........................................................................................................................ 102
Chart 64. Qatar’s Entrance Gates Demand Forecast, 2015 to 2026 .................................................................................................... 103
Chart 65. Qatar’s Entrance Gates Imports, 2001 - 2015 ....................................................................................................................... 103
Chart 66. Qatar’s Entrance Gates Exports, 2001 - 2015 ........................................................................................................................ 104
Manufacture of Structural Metal Products10
Chart 67. Qatar’s Entrance Gates Imports Vs Domestic Sales, 2001 - 2015 ........................................................................................ 104
Chart 68. Qatar’s Entrance Gates Import Forecast, 2015 to 2026 ....................................................................................................... 105
Chart 69. Qatar’s Entrance Gates Export Forecast, 2015 to 2026 ........................................................................................................ 105
Chart 70. Qatar’s Entrance Gates Selling Prices Forecast, 2015 to 2026 ............................................................................................ 106
Chart 71. Qatar’s Decorative Doors Demand, 2001 - 2015 .................................................................................................................. 107
Chart 72. Decorative Doors Market Segmentation, 2015 .................................................................................................................... 107
Chart 73. Qatar’s Decorative Doors Demand Forecast, 2015 to 2026 ................................................................................................ 108
Chart 74. Qatar’s Decorative Doors Imports, 2001 - 2015 .................................................................................................................... 108
Chart 75. Qatar’s Decorative Doors Exports, 2001 - 2015 .................................................................................................................... 109
Chart 76. Qatar’s Decorative Doors Imports Vs Domestic Sales, 2001 - 2015 .................................................................................... 109
Chart 77. Qatar’s Decorative Doors Import Forecast, 2015 to 2026 .................................................................................................... 110
Chart 78. Qatar’s Decorative Doors Export Forecast, 2015 to 2026 .................................................................................................... 110
Chart 79. Qatar’s Decorative Doors Selling Prices Forecast, 2015 to 2026 ......................................................................................... 111
Chart 80. Qatar’s Steel Flush Doors Demand, 2001 - 2015 .................................................................................................................. 112
Chart 81. Steel Flush Doors Market Segmentation, 2015 .................................................................................................................... 112
Chart 82: Qatar’s Steel Flush Doors Demand Forecast, 2015 to 2026 ................................................................................................ 113
Chart 83. Qatar’s Steel Flush Doors Imports, 2001 - 2015 .................................................................................................................... 113
Chart 84. Qatar’s Steel Flush Doors Exports, 2001 - 2015 .................................................................................................................... 114
Chart 85. Qatar’s Steel Flush Doors Imports Vs Domestic Sales, 2001 - 2015 .................................................................................... 114
Chart 86. Qatar’s Steel Flush Doors Import Forecast, 2015 to 2026 .................................................................................................... 115
Chart 87. Qatar’s Steel Flush Doors Export Forecast, 2015 to 2026 .................................................................................................... 115
Chart 88. Qatar’s Steel Flush Doors Selling Prices Forecast, 2015 to 2026 ......................................................................................... 116
Chart 89. Qatar’s Rolling Shutters Demand, 2001 - 2015 ..................................................................................................................... 117
Chart 90. Rolling Shutters Market Segmentation, 2015 ....................................................................................................................... 117
Chart 91. Qatar’s Rolling Shutters Demand Forecast, 2015 to 2026 ................................................................................................... 118
Chart 92. Qatar’s Rolling Shutters Imports, 2001 - 2015 ....................................................................................................................... 118
Chart 93. Qatar’s Rolling Shutters Exports, 2001 - 2015 ....................................................................................................................... 119
Chart 94. Qatar’s Rolling Shutters Imports Vs Domestic Sales, 2001 - 2015 ....................................................................................... 119
Chart 95. Qatar’s Rolling Shutters Import Forecast, 2015 to 2026 ....................................................................................................... 120
Chart 96. Qatar’s Rolling Shutters Export Forecast, 2015 to 2026 ....................................................................................................... 120
Chart 97. Qatar’s Rolling Shutters Fabrication Selling Prices Forecast, 2015 to 2026 ....................................................................... 121
Chart 98. Key Sources of Imports (All Types of Steel Doors), 2010 to 2015 ........................................................................................ 121
Chart 99. Key Destinations of Exports (All Types of Steel Doors), 2010 to 2015 ................................................................................ 122
Manufacture of Structural Metal Products 11
List of charts
Chart 100. Qatar’s Staircase Railings Demand, 2001 - 2015 ................................................................................................................. 123
Chart 101. Staircase Railings Market Segmentation, 2015 ................................................................................................................... 123
Chart 102. Qatar’s Staircase Railings Demand Forecast, 2016 to 2026 ............................................................................................... 124
Chart 103. Qatar’s Staircase Railings Imports, 2001 - 2015 .................................................................................................................. 124
Chart 104. Qatar’s Staircase Railings Exports, 2001 - 2015 ................................................................................................................... 125
Chart 105. Key Sources of Staircase Railings Imports, 2010 to 2015 ................................................................................................... 125
Chart 106. Key Destinations of Staircase Railings Exports, 2010 to 2015 ........................................................................................... 126
Chart 107. Qatar’s Staircase Railings Imports Vs Domestic Sales, 2001 - 2015 .................................................................................. 126
Chart 108. Qatar’s Staircase Railings Import Forecast, 2015 to 2026 .................................................................................................. 127
Chart 109. Qatar’s Staircase Railings Export Forecast, 2015 to 2026 .................................................................................................. 128
Chart 110. Qatar’s Staircase Railings Selling Prices Forecast, 2015 to 2026 ....................................................................................... 128
Chart 111. Qatar’s Grills and Fencing Demand, 2001 - 2015 ............................................................................................................... 129
Chart 112. Grills and Fencing Market Segmentation, 2015 ................................................................................................................. 130
Chart 113. Qatar’s Grills and Fencing Demand Forecast, 2015 to 2026 ............................................................................................. 130
Chart 114. Qatar’s Grills and Fencing Imports, 2001 - 2015 ................................................................................................................. 131
Chart 115. Qatar’s Grills and Fencing Exports, 2001 - 2015 ................................................................................................................. 131
Chart 116. Key Sources of Grills and Fencing Imports, 2010 to 2015.................................................................................................. 132
Chart 117. Key Destinations of Grills and Fencing Exports, 2010 to 2015 .......................................................................................... 132
Chart 118. Qatar’s Grills and Fencing Imports Vs Domestic Sales, 2001 - 2015 ................................................................................. 133
Chart 119. Qatar’s Grills and Fencing Import Forecast, 2015 to 2026 ................................................................................................. 134
Chart 120. Qatar’s Grills and Fencing Export Forecast, 2015 to 2026 ................................................................................................. 134
Chart 121. Qatar’s Grills and Fencing Selling Prices Forecast, 2015 to 2026 ...................................................................................... 135
Chart 122. Qatar’s Architectural Steel Fabrication Market structure and Capacity Utilization.......................................................... 136
Chart 123. Qatar’s Architectural Steel Fabrication Demand-Supply Analysis, 2014 to 2026 ............................................................. 138
Chart 124. Architectural Aluminum Fabrication Market Segmentation, 2015 .................................................................................... 144
Chart 125. Qatar’s Aluminum and Glass Works Demand, 2001 - 2015 ............................................................................................... 145
Chart 126. Architectural Aluminum Fabrication Market Segmentation, 2015 .................................................................................... 146
Chart 127. Qatar’s Aluminum and Glass Works Demand Forecast, 2015 to 2026 .............................................................................. 146
Chart 128. Qatar’s Aluminum and Glass Works Imports, 2001 - 2015 ................................................................................................. 147
Chart 129. Qatar’s Aluminum and Glass Works Imports Vs Domestic Sales, 2001 - 2015 ................................................................. 147
Chart 130. Qatar’s Aluminum and Glass Works Import Forecast, 2015 to 2026 ................................................................................. 148
Chart 131. Price Range of Aluminum and Glass Works ........................................................................................................................ 148
Chart 132. Qatar’s Aluminum and Glass Works Selling Prices Forecast, 2015 to 2026 ...................................................................... 149
Manufacture of Structural Metal Products12
List of charts
Chart 133. Qatar’s Aluminum Sheet Cladding Works Demand, 2001 - 2015 ..................................................................................... 150
Chart 134. Aluminum Sheet Cladding Market Segmentation, 2015 ................................................................................................... 150
Chart 135. Qatar’s Aluminum Sheet Cladding Works Demand Forecast, 2015 to 2026 .................................................................... 151
Chart 136. Qatar’s Aluminum Sheet Cladding Works Imports, 2001 - 2015 ....................................................................................... 151
Chart 137. Qatar’s Aluminum Sheet Cladding Works Imports Vs Domestic Sales, 2001 - 2015 ....................................................... 152
Chart 138. Qatar’s Aluminum Sheet Cladding Works Import Forecast, 2015 to 2026 ....................................................................... 152
Chart 139. Aluminum Sheet Cladding Works Price Range .................................................................................................................. 153
Chart 140. Qatar’s Aluminum Sheet Cladding Works Selling Prices Forecast, 2015 - 2026 .............................................................. 153
Chart 141. Qatar’s Aluminum Doors, Windows and Partitions Demand, 2001 - 2015 ....................................................................... 154
Chart 142. Qatar’s Aluminum Doors, Windows and Partitions Demand Forecast, 2015 to 2026 ..................................................... 155
Chart 143. Qatar’s Aluminum Doors, Windows and Partitions Imports, 2001 - 2015 ......................................................................... 156
Chart 144. Qatar’s Aluminum Doors, Windows and Partitions Exports, 2001 - 2015 ......................................................................... 156
Chart 145. Key Sources of Aluminum Doors, Windows and Partitions Imports, 2010 - 2015 ............................................................ 157
Chart 146. Key Destinations of Aluminum Doors, Windows and Partitions Exports, 2010 - 2015 .................................................... 157
Chart 147. Qatar’s Aluminum Doors, Windows and Partitions Imports Vs Domestic Sales, 2001 - 2015 ......................................... 158
Chart 148. Qatar’s Aluminum Doors, Windows and Partitions Import Forecast, 2015 to 2026 ......................................................... 159
Chart 149. Qatar’s Aluminum Doors, Windows and Partitions Export Forecast, 2015 to 2026 ......................................................... 159
Chart 150. Qatar’s Aluminum Doors, Windows and Partitions Selling Prices Forecast, 2015 to 2026 ............................................. 160
Chart 151. Qatar’s Aluminum Railing and Fencing Demand, 2001 - 2015 .......................................................................................... 161
Chart 152. Qatar’s Aluminum Railing and Fencing Demand Forecast, 2015 to 2026 ........................................................................ 161
Chart 153. Qatar’s Aluminum Railing and Fencing Imports, 2001 - 2015 ............................................................................................ 162
Chart 154. Qatar’s Aluminum Railing and Fencing Exports, 2001 - 2015 ............................................................................................ 162
Chart 155. Key Sources of Aluminum Railing and Fencing Imports, 2010 to 2015 ............................................................................ 163
Chart 156. Key Destinations of Aluminum Railing and Fencing Exports, 2010 to 2015..................................................................... 163
Chart 157. Qatar’s Aluminum Railing and Fencing Imports Vs Domestic Sales, 2001 - 2015 ............................................................ 164
Chart 158. Qatar’s Aluminum Railing and Fencing Import Forecast, 2015 to 2026 ........................................................................... 164
Chart 159. Qatar’s Aluminum Railing and Fencing Export Forecast, 2015 to 2026 ............................................................................ 165
Chart 160. Qatar’s Aluminum Railing and Fencing Selling Prices Forecast, 2015 to 2026 ................................................................ 165
Chart 161. Qatar’s Architectural Aluminum Fabrication Market Structure and Capacity Utilization ................................................ 166
Chart 162. Qatar’s Architectural Aluminum Fabrication Demand-Supply Analysis, 2015 to 2026 .................................................... 169
Manufacture of Structural Metal Products 13
List of tables
Table 1. Segments under Structural Metal Products .............................................................................................................................. 24
Table 2. HS Codes of Structural Steel Fabrication Products .................................................................................................................. 30
Table 3. HS Codes of PEBs ....................................................................................................................................................................... 30
Table 4. HS Codes of Pre-fabricated Buildings ....................................................................................................................................... 31
Table 5. HS Codes of Architectural Steel Fabrication Products............................................................................................................. 32
Table 6. HS Codes of Architectural Aluminum Fabrication .................................................................................................................... 33
Table 7. Raw Materials Consumed ........................................................................................................................................................... 33
Table 8. HS Codes of Steel Raw Materials ............................................................................................................................................... 34
Table 9. HS Codes of Aluminum Raw Materials ...................................................................................................................................... 37
Table 10. Structural Steel Fabrication Market Structure Snapshot ........................................................................................................ 42
Table 11. Structural Steel Fabrication: Key Domestic Players ................................................................................................................ 42
Table 12. PEB: Key Domestic Players ....................................................................................................................................................... 62
Table 13. Pre-fabricated Buildings Market Structure Snapshot ............................................................................................................. 93
Table 14. Pre-fabricated Buildings: Key Domestic Players ..................................................................................................................... 93
Table 15. Architectural Steel Fabrication Market Structure Snapshot................................................................................................. 136
Table 16. Architectural Steel Fabrication: Key Domestic Players ........................................................................................................ 137
Table 17. Architectural Aluminum Fabrication Market Structure Snapshot ........................................................................................ 167
Table 18. Architectural Aluminum Fabrication: Key Domestic Players ................................................................................................ 167
Manufacture of Structural Metal Products14
List of figures
Figure 1: Metal Fabrication Value Chain .................................................................................................................................................. 22
Figure 2: Segments under Structural Metal Products ............................................................................................................................ 23
Figure 3: Structural Steel Fabrication Cost Component ........................................................................................................................ 50
Figure 4: Structural Steel Fabrication SWOT Analysis ............................................................................................................................ 52
Figure 5: Michael Porter’s Five Forces Model (Structural Steel Fabrication) ........................................................................................ 53
Figure 6: Critical Success Factors - Structural Steel Fabrication............................................................................................................ 54
Figure 7: Key Components of PEBs ......................................................................................................................................................... 56
Figure 8: Applications of PEBs ................................................................................................................................................................. 57
Figure 9: Benefits of PEBs vs Conventional Steel Buildings .................................................................................................................. 58
Figure 10: Cost components of PEBs ...................................................................................................................................................... 67
Figure 11: PEB SWOT Analysis ................................................................................................................................................................. 69
Figure 12: Michael Porter’s Five Forces Model (Pre-engineered Building)........................................................................................... 70
Figure 13: Critical Success Factors - Pre-engineered Building .............................................................................................................. 71
Figure 14: Pre-fabricated Buildings SWOT Analysis ............................................................................................................................... 96
Figure 15: Michael Porter’s Five Forces Model (Pre-fabricated Building) ............................................................................................. 97
Figure 16: Critical Success Factors - Pre-fabricated Building ................................................................................................................ 98
Figure 17: Architectural Steel Fabrication SWOT Analysis .................................................................................................................. 140
Figure 18: Michael Porter’s Five Forces Model (Architectural Steel Fabrication) ............................................................................... 141
Figure 19: Critical Success Factors - Architectural Steel Fabrication .................................................................................................. 142
Figure 20: Architectural Aluminum Fabrication SWOT Analysis.......................................................................................................... 171
Figure 21: Michael Porter’s Five Forces Model (Architectural Aluminum Fabrication) ...................................................................... 172
Figure 22: Critical Success Factors - Architectural Aluminum Fabrication ......................................................................................... 173
Manufacture of Structural Metal Products 15
Manufacture of Structural Metal Products16
ACP Aluminum Composite Panels
BS British Standards
bn Billion
BUA Built-Up Area
CAGR Compounded Annual Growth Rate
CBUA Completed Built-Up Area
Dmtu Dry Metric Ton Unit
EHS Environment, Health And Safety
EU European Union
ERW Electric Resistance Welded
FIFA Fédération Internationale De Football Association
GI Galvanized Iron
GCC Gulf Cooperation Council
GDP Gross Domestic Product
GOIC Gulf Organization For Industrial Consulting
HRC Hot Rolled Coils
HS Code Harmonized System Code
ias Iron And Steel
ISIC International Standard Industrial Classification
ISO International Organization For Standardization
ITC International Trade Centre
KSA Kingdom Of Saudi Arabia
MBS Metal Building Software
MDPS Ministry Of Development Planning And Statistics
MENA Middle East And North Africa
mm Millimeter
mn Million
MT Metric Ton
Nas Non-Alloy Steel
nes Not Elsewhere Specified
OHSAS Occupational Health And Safety Assessment Standards
p.a. Per Annum
PEB Pre-Engineered Building
QAR Qatari Riyal
QCS Qatar Construction Specifications
QDB Qatar Development Bank
R2 R-Squared
SEZ Special Economic Zones
SIDF Saudi Industrial Development Fund
SME Small And Medium Enterprises
Sqm Square meter
TPA Tons Per Annum
UAE United Arab Emirates
UK United Kingdom
USA United States Of America
USD United States Dollar
WSA World Steel Association
List of Abbreviations
Manufacture of Structural Metal Products 17
Manufacture of Structural Metal Products18
Executive Summary
1 Team Analysis2 MDPS: Annual Bulletin of Industry & Energy Statistics 20153 Team Analysis
The structural metal products sector comprises a wide range of finished products that are fabricated using semi-finished products, such as angles, channel sections, sheets and plates of aluminum and steel. These semi-finished products are subjected to many processes, such as bending, cutting, welding, machining and assembling, to produce the desired finished products. These finished products can be classified into product segments such as (a) structural steel fabrication, (b) pre-engineered buildings (PEBs), (c) pre-fabricated buildings, (d) architectural steel fabrication products and (e) architectural aluminum fabrication products. Products from these segments are finished products used in real estate and infrastructure projects.
The construction sector drives the growth of the structural metal products sector. From 2001 to 2015, the sector grew at a CAGR of 19.3% from QAR653mn in 2001 to an estimated QAR7,733mn in 20151. According to the latest statistics2 published by MDPS in 2016, this sector had 558 manufacturing establishments that together employed a workforce of 27,398 personnel in 2015. The gross value added by the sector grew by 18.8 times from QAR149mn in 2001 to QAR2,812mn in 2015.
Analyzing the 2015 sector composition, structural steel fabrication emerges as the largest segment, constituting 53.1% of the sector in value terms3, followed by architectural aluminum fabrication, which has a 21.4% share. Other product segments such as architectural steel fabrication, pre-fabricated buildings and pre-engineered buildings have sector shares of 12.4%, 10.4% and 2.6%, respectively. Domestic production of raw materials is limited to small steel sections, flat bars, aluminum extrusion profiles and aluminum panels. Qatar is heavily dependent on imports for procuring raw materials, such as steel sheets, plates, angles, channels, rods, pipes and glass, required by the sector.
Manufacture of Structural Metal Products 19
In the medium to long term, the opportunities would outweigh the challenges due to the large market size, pipeline of upcoming projects in Qatar and opportunities for civil contractors to integrate backward.
Pre-Engineered Buildings Segment Overview: PEBs use steel plates and sheets to fabricate pre-designed primary and secondary sections for factory sheds, warehouses, hangars and other industrial and commercial buildings.
Driven chiefly by the industrial sector projects, the market size for pre-engineered buildings was estimated to be 33,732MT (QAR201.8mn) in 2015. In terms of value, pre-engineered buildings constitute 2.6%7 of the structural metal products sector. The average capacity utilization8 for pre-engineered buildings segment was 60% in 2015.
The establishment of a domestic manufacturing facility in 2007 substantially reduced Qatar’s dependence on PEB imports from 63% in 2006 to about 38% share of the total market in 2015. Currently, there is only one domestic company (BSI Steel) with a fabrication capacity of 20,000 MTPA that is focused entirely on the fabrication of PEBs. There are also a handful of other steel fabricators that manufacture small volumes of PEB as part of the overall service offerings and were servicing the market from 2001 to 2006. Another player, with a capacity of 30,000MTp.a. is expected to commence production in 2017.
Large scale developments, such as the Special Economic Zones (SEZs) promoted by Manateq, factory sheds, warehouses projects and other industrial projects, would drive the demand for PEBs. On the back of these demand drivers, the market is expected to grow at a CAGR of 4.2% from QAR201.8mn in 2015 to an estimated QAR317.8mn in 2026.
With respect to challenges, the market is likely to remain competitive and price sensitive. Dependence on imports for procurement of raw materials and higher operational expenses (salaries, rents, etc.) than in other countries, such as the UAE and the KSA, would limit export potential to rare opportunities of less than 1% of domestic production.
Given the market size and the growth potential of this segment, driven mainly by factory, warehousing and industrial projects, subject to competitive challenges, new entrepreneurs can benefit from average incremental opportunities worth QAR15mn (1,148MT) per annum from 2017 to 2026. However, as the average incremental business per annum until 2026 is low for offering viable opportunities, entrepreneurs would have to target related segments, such as structural steel fabrication and architectural steel fabrication, and focus on being cost competitive to be able to substitute imports and gain market share from existing players.
Structural Steel Fabrication Segment Overview: Structural steel fabrication comprises constructing load-bearing steel frames (i.e., columns, beams, floors, trusses, etc.) for residential and commercial buildings, industrial facilities and other projects. Driven by the construction sector, the market size for structural steel fabrication grew at a CAGR of 15.7% from 57,482MT (QAR272mn) in 2001 to an estimated 441,684MT (QAR4,107mn) in 2015.
Qatar has 467 firms in the steel fabrication segment. Most steel fabrication units have capabilities to undertake both architectural steel fabrication and structural steel fabrication works. The average capacity utilization for structural steel fabrication segment in 2015 was 62.8%.
Due to the slowdown in the construction sector, the market size reduced by 20.9%, in value terms, from QAR4,107mn in 2015 to QAR3,247mn in 2016.
Going forward, the structural steel fabrication market is expected to grow at a CAGR of 4.0% from QAR3,247mn in 2016, to an estimated QAR4,804mn (456,740MT) in 2026.
Each structural steel fabrication work is a unique job order based on its engineering design and can be segmented by project type. The demand is likely to arise from the key segments, such as factory and warehouses (50% share), real estate (15% share) and infrastructure (10% share). Metro rail projects and stadium works are expected to constitute 4% and 2% of the demand, respectively, during 2016 to 2026.
In terms of challenges, the market is likely to remain significantly competitive and price sensitive. Heavy dependence on imports for procurement of raw material and high operational expenses4 (salaries, rent, etc.) - as compared to those in other countries such as the UAE and the KSA - would limit export potential5 to rare opportunities of up to 2.2% of the domestic production for structural steel fabrication. Imports are likely to constitute 33% to 38% of the market, as they are cheaper than domestic production. These would further heighten the challenges and intensify competitive rivalry. In view of the challenges, key critical success factors include access to raw material linkages, access to market and strategic linkages, operational efficiency and technical know-how.
Large market size means an opportunity6 for new players to tap into 2,948MT worth of average incremental business every year, from 2017 to 2026. This implies that subject to competitive challenges, opportunities exist for two mid-sized players (1,800 MT per annum installed capacity running at 80% utilization) to enter the market every year.
4,8 Primary Interviews5, 6,7 Team Analysis
20 Manufacture of Structural Metal Products
Pre-fabricated Housing Segment Overview: Pre-fabricated buildings use cold-formed sections made from galvanized iron slit coils9, light gauge steel sections and various finishing materials such as gypsum boards, aluminum sheets along with rockwool or fiberglass insulation materials to build habitable spaces, such as labor accommodations, site offices, mosques, majlis, villa extensions and security cabins.
Qatar’s pre-fabricated buildings market was valued at QAR806mn in 2015, constituting 10.4% of the overall structural metal products sector. The market has witnessed a steady growth wherein the demand has grown from 262,305sqm (QAR193mn) in 2005 to 753,514sqm (QAR806mn) in 2015 indicating a growth of 11.1% in volume and 15.4% in value terms. Qatar has 20 firms operating in this segment. The average capacity utilization for the pre-fabricated buildings segment was 52.3% in 2015. The market size reduced by 33.2% in value terms, from QAR806mn in 2015 to QAR539mn in 2016. The market is expected to grow at a CAGR of 3.8% from QAR539mn in 2016 to an estimated QAR782mn in 2026.
The pre-fabricated buildings market is dominated by larger players with the capacity and capability to focus on a varied mix of products, projects and customers. Domestic players have an upper hand in terms of market knowledge, access to projects, support from their well-established parent companies and quicker turnaround time as compared to importers.
The demand for labor accommodations, which formed the largest share with 58.6% of the 2015 pre-fabricated buildings market in value terms, is likely to be driven by real estate and infrastructure development projects, giving rise to an influx of laborers into Qatar. The pre-fabricated labor accommodation segment is expected to grow, in value terms, at a CAGR of 3.8%, from QAR306mn (316,746sqm) in 2016 to an estimated QAR444mn (360,022sqm) in 2026.
Pre-fabricated private units comprising site offices, majlis, mosques, security kiosks, etc. accounted for 39.8% share of the 2015 pre-fabricated buildings market. This segment is likely to experience a healthy growth rate (CAGR 3.8%) from QAR227mn in 2016 to reach QAR329mn in 2026. The construction of real estate asset classes, such as villas and multi-story residential developments, are likely to be the prime demand drivers for most pre-fabricated private units.
Pre-fabricated greenhouses is a marginal segment constituting only 1.6% of the 2015 pre-fabricated buildings market. These are mainly used for agricultural purposes, such as cultivation of crops, fruits and vegetables within temperature and climate-controlled in-house structures, which have minor opportunities in Qatar. Valued at QAR13mn in 2015, and entirely serviced by imports, it is expected to remain a marginal market valued at less than QAR10mn per annum from 2017 to 2026.
The 2016 market size and growth rate of the pre-fabricated buildings segment till 2026 points to an average incremental opportunity of QAR24.4mn (6,231sqm) per annum, for new
players to tap into from 2017 to 2026, subject to competitive challenges. As the average incremental business per annum till 2026 is low for offering viable opportunities, entrepreneurs would have to focus on being cost competitive to be able to compete and gain market share from established players in the market.
Architectural Steel Fabrication Segment Overview:Architectural steel fabrication comprises steel products manufactured through the processes of designing, cutting, bending, welding and assembling. These products have decorative and non-load-bearing applications, such as entrance gates, decorative doors, steel flush doors, rolling shutters, staircase handrails, and fencing and grills.
The 2015 architectural steel fabrication market is sized at QAR961mn. Real estate asset classes, such as villas and multi-story residential developments, are likely to be the prime drivers of growth for most architectural products. Key products include grills and fencing (38.5% share), steel staircase railings (26.3% share), entrance gates (15.1% share) and decorative doors (9.7% share).
Qatar has 467 firms in the steel fabrication segment. Most steel fabrication units have capabilities to undertake both architectural steel fabrication and structural steel fabrication works. The average capacity utilization for architectural steel fabrication segment in 2015 was 63.8%. Owing to the slowdown in the construction sector, the architectural steel fabrication market size reduced by 34.5%, in value terms, from QAR961mn in 2015 to an estimated QAR629mn in 2016.
Villas are expected to account for 45% of Qatar’s upcoming real estate development10 of 78.9mn sqm over 2016 to 2026. Villas are likely to be a prime driver for most architectural products. On the back of strong demand drivers, the market is expected to grow at a CAGR of 3.7% from QAR629mn in 2016 to an estimated QAR909mn in 2026.
In the architectural steel fabrication market, grills and fencing is the largest segment as it serves the needs of all types of real estate projects as well as those of infrastructure projects. The market would grow at a CAGR of 3.7% from QAR256mn (677,039sqm) in 2016 to reach QAR370mn (764,800sqm) in 2026. Steel staircase railings is another large market as it widely used across all real estate projects. It is expected to grow at a CAGR of 3.7% from QAR160mn (185,661 linear meter) in 2016 to reach QAR231mn (209,727sqm) in 2026. Going forward, the domestic players would continue to dominate the market for products such as entrance gates (63.2% market share), decorative gates (65.7% market share), staircase railings (85.5% market share), and grills and fencing (76.4% market share). These products have greater reliance on the villa segment, which gives them a fragmented customer base, making it difficult for importers to penetrate. As against this, products such as the rolling shutters and steel flush doors form niche markets, mainly driven by commercial developments. As a result, major portion of the
9 Primary Interviews10 Team Analysis
21Manufacture of Structural Metal Products
market for steel flush doors (74.4%) and rolling shutters (74.5%) would be serviced by imports. In terms of challenges, the market is likely to remain significantly competitive and price sensitive. Imports are likely to remain cheaper than domestic production and further heighten the challenges.
The given market size and a moderate pace of growth offer an opportunity for new players to tap into 806MT worth of average incremental business every year from 2017 to 2026, subject to competitive challenges. Subject to competitive challenges, opportunities exist for one medium-sized player (1,800MT per annum installed capacity running at 80% utilization) dedicated to architectural steel fabrication works, to enter the market every two years. Steel flush doors and rolling shutters are dominated by imports and form hard-to-penetrate niche markets. New entrepreneurs can focus on products such as entrance gates, decorative gates, staircase railings, and grills and fencing products. To augment their product portfolio, they can also consider taking up small structural steel fabrication job orders.
In the medium to long term, the strengths and the opportunities outweigh the threats due to a sizable market opportunity, pivvvpeline of upcoming projects in Qatar, fragmented customer base (villa projects), scope for differentiation11 on account of design and creativity, and the localized nature of the product.
Architectural Aluminum Fabrication Segment Overview: Architectural aluminum fabrication includes aluminum and glass works (aluminum and glass doors and windows, curtain walls, skylights and dome), aluminum sheet cladding works, aluminum staircase handrails and fencing, and solid aluminum doors, windows and partitions.
Architectural aluminum fabrication emerges as the second largest segment constituting 21.4%12 of the structural metal products sector. The 2015 architectural aluminum fabrication market is sized at QAR1,656mn. Real estate asset classes, such as villas and multi-story residential developments, commercial buildings, public buildings are likely to be the prime driver of architectural products. Key product segments include aluminum and glass works (77.2% share), aluminum doors, windows and partitions (4.6% share), aluminum railings and fencing (1.7% share) and aluminum sheet cladding works (16.5% share).
Qatar has 70 local players in this segment. The average capacity utilization for architectural aluminum fabrication segment in 2015 was 64.8%. Owing to the slowdown in the construction sector, the architectural aluminum fabrication market size reduced by 46.1%, in value terms, from QAR1,656mn in 2015 to an estimated QAR893mn in 2016. The architectural aluminum fabrication market is expected to grow at a CAGR of 4.4% from QAR893mn in 2016 to an estimated QAR1,375mn in 2026.
Aluminum and glass works product segment has followed the real estate development trends. With this product segment, curtain walls emerge as the largest product13 accounting for 65% share, followed by aluminum doors and windows at 30%. Skylight and domes have a small share of 5%. In value terms, the aluminum and glass works market would grow at a CAGR of 4.5% from QAR660mn (953,775sqm) in 2016 to reach QAR1,022mn (1,151,172sqm) in 2026.
Demand for aluminum sheet cladding works — commonly used in combination with aluminum and glass curtain wall products vv is estimated to grow at a CAGR of 4.5% from QAR141mn (476,888sqm) in 2016 to reach QAR218mn (575,586sqm) in 2026, mainly driven by commercial developments, public buildings and multi-story residential buildings.
Primary interviews with aluminum and glass fabrication units indicate that due to the high cost of operations and raw material expenses owing to the reliance on imports of glass, Qatar’s production is not cost competitive. Hence, aluminum and glass works, and aluminum sheet cladding works are not exported.
Aluminum doors, windows and partitions market is a small market estimated at QAR77mn in 2016. It is likely to grow at a CAGR of 3.4% to reach QAR111mn in 2026. As raw material used (aluminum extrusion) is locally available, export opportunity is estimated at 9.5% of the domestic production between 2016 and 2026. Aluminum staircase railings and fencing is a marginal market valued at QAR16mn in 2016 and set to reach QAR24mn in 2026, pacing at CAGR of 4.3%. Given the low-entry barriers, widespread applications within architectural aluminum fabrication and a large market size, this has been an attractive sector for Qatari entrepreneurs. The market is fiercely competitive, with several firms operating in the market and each targeting the same project.
A large market size and a moderate pace of growth offer an opportunity for new players to tap into 32,738sqm worth of average incremental opportunity every year. Subject to competitive challenges, opportunities14 exist for two medium-sized player (5,000sqm per month installed capacity, running at 80% utilization) dedicated to architectural aluminum fabrication works, to enter the market every three years. New entrepreneurs focusing on architectural aluminum fabrication need to target on all products such as aluminum and glass works, aluminum sheet cladding works, aluminum doors, windows and partitions, and aluminum railings and fencing.
11,13 Primary Interviews12,14 Team Analysis
22 Manufacture of Structural Metal Products
1.1. Sector OverviewStructural metal products are fabricated using semi-finished products such as angles, channels sections, sheets and plates, etc., of aluminum and steel. These semi-finished products are subjected to many processes, such as bending, cutting, welding, machining and assembling, to produce the desired finished products. The figure below indicates the high-level value chain15 of the sector.
1. Introduction
15 Arcelor Mittal Corporate Presentation
Figure 1: Metal Fabrication Value Chain
Fini
shed
products Ore Processing
Semi-finished
metal products
Billets, blooms, ingots
Smel
ting
and
Refin
ing
Ores containing metals are extracted and processed to yield metal concentrates.
Metal concentrates are smelted and refined in furnaces to yield crude metal.
Crude metal undergoes casting and rolling into billets, blooms and ingots.
Crude metal is processed to yield semi-finished products such as angles, channels sections, plates, profiles, etc.
Semi-finished products are the key raw materials for fabrication of all structural & architectural metal products
Structural metal products
23Manufacture of Structural Metal Products
Structural steel fabrication
Pre-engineered buildings
Pre-fabricated buildings
Pre-fabricated labor camps
Pre-fabricated private units
Pre-fabricated greenhouse
Architectural steel fabrication
Entrance gates
Decorative doors
Steel flush doors
Rolling shutters
Staircase railing
Grills and fencing
Architectural aluminum fabrication
Aluminum & glass works
Aluminum doors, windows and partitions
Aluminum railing and fencing
Aluminum sheet cladding works
Structural metal products
Figure 2: Segments under Structural Metal Products
This sector includes a wide range of finished products that can be classified into product segments, such as structural steel fabrication works, pre-engineered buildings (PEB), pre-fabricated building, architectural steel fabrication products and architectural aluminum fabrication products. The illustration below provides detail of the sector and product segments.
24 Manufacture of Structural Metal Products
Architectural metal fabrication comprises products that are used for non-load bearing or decorative applications, such as doors and windows, staircase handrails, grills and fencing. Architectural metal products can be made from both aluminum and steel.
Steel is used in structural applications in construction projects due to its good load-bearing properties, low cost and ease of fabrication. Aluminum is not used for structural purposes for construction projects as it is expensive and difficult to weld as compared to steel.
Structural steel fabrication comprises constructing load-bearing steel frames (i.e., columns, beams, floors, trusses, etc.) for residential and commercial buildings, industrial facilities and other projects.
16 Steel Construction Encyclopedia
PEBs and pre-fabricated buildings are constructed in modular segments in a factory and then transported and installed at the site. Pre-fabricated buildings use cold-formed sections made from galvanized iron slit coils, light gauge steel sections and various finishing material to build habitable spaces, such as labor accommodations, site offices, mosques, majlis, villa extensions, security cabins, etc.
PEBs use steel plates and sheets to fabricate pre-designed primary and secondary sections for factory sheds, warehouses, hangars, and other industrial and commercial buildings. Based on the above description, this sector can be classified into key product segments and products as shown in the table below.
Table 1. Segments under Structural Metal Products
Structural Metal Product Segments
Product Segment Description
Structural steel fabrication
This segment includes construction works for load-bearing steel frames (i.e., columns, beams, floors, trusses, etc.) for residential and commercial buildings, industrial facilities and other projects.
PEBsThis segment includes pre-engineered structures made of sheets and plates for warehouses, factory sheds, hangars, etc.
Pre-fabricated buildings
This segment includes pre-fabricated labor accommodation, pre-fabricated private units (site offices, mosques, majlis, security kiosks and rooms for drivers or maids) and pre-fabricated green houses.
Architectural steel fabrication
This segment includes entrance gates, decorative doors, steel flush doors, rolling shutters, staircase handrail, and grills and fencing.
Architectural aluminum fabrication
This segment includes: (a) aluminum and glass works (aluminum and glass doors and windows, curtain wall, skylight and domes); (b) aluminum sheet cladding works; (c) aluminum railing and fencing; and, (d) all aluminum doors, windows and partitions.
1.1.1. Structural Steel FabricationStructural steel fabrication can be defined as the design, fabrication and erection of a steel structure through organized combination of structural steel members and sections, designed to carry loads and provide a strong and stiff frame16. Structural steel fabrication comprises fabrication of steel frames used in buildings, construction and infrastructure projects. These include steel frames, beams, trusses, towers, masts, bridges and bridge sections, sheet piling, sheds and domes. These are highly engineered or designed products as they are load-bearing elements.
Structural steel sections are used as load-bearing members, such as columns, beams, girders, trusses and portal frame. These come in various shapes such as I-section, H-section, L-angles and T-sections. Hot-rolled I-sections and steel plates are the most commonly used raw materials.
Structural steel is extensively used for infrastructure projects, such as metro and train stations, stadiums, bridges, industrial facilities, low-rise commercial and retail buildings as well as the construction of high-rise buildings.
Common steel varieties used for structural steel are carbon steel and high-strength low-alloy steels. These alloys can be heat treated (quenched and tempered) for enhanced mechanical properties and also be made corrosion resistant. The physical properties of steel —high strength, ductility, seismic resistance, elasticity, uniformity of material, ease of fabrication and speed of erection — make it a preferred choice for structural projects.
25Manufacture of Structural Metal Products
17 Primary Interviews
Building structural frame
Metal trussFactory shed structural frame
Parking shedBridge section
Dome
1.1.2. Pre-engineered Buildings (PEBs)The PEB segment includes fabrication of steel structures built over a structural concept of primary members, secondary members, roof and wall sheeting connected to each other and various other building components. Pre-engineered steel buildings use a combination of pre-designed sections made form steel plates and cold-formed sections made from sheets.
These form the basic steel framework that can be either covered by a single skin sheeting with added insulation or insulated sandwich panels for roofing and wall cladding. Such PEBs can be designed to be fitted with different structural accessories such as mezzanine floors, canopies, interior partitions and crane systems, among others.
PEBs enable quicker and economical creation of industrial buildings, factory sheds and warehouse infrastructure. They are ideal for such structures where the intermediate columns need to be avoided to enable free movement of goods and machinery. PEBs are fabricated based on the end user’s requirement in a factory and erected on site, which helps save time. PEBs can be delivered to a site within five to eight weeks, while conventional steel structures can take up to 25 weeks to complete17. The unique techniques employed during fabrication help PEBs to be up to 30% lighter than regular steel fabrication using hot-rolled sections. No welding or fabrication is required at the construction site, resulting in greater speed and efficiency.
PEB warehouse PEB hangar PEB factory
26 Manufacture of Structural Metal Products
1.1.3. Pre-fabricated BuildingsPre-fabricated buildings are constructed in modular segments in a factory and then transported and installed at the site. Walls of pre-fabricated buildings are load-bearing elements that are constructed from cold-formed sections made from slit coils of galvanized iron (GI). These sections are covered by gypsum boards and the in-between space in filled with insulating materials such as rockwool or fiberglass. The wall thickness can be between 100mm and 300mm, depending on the number of floors of the structure. As pre-fabricated buildings are engineered with load-bearing walls (as against the column-beam frame structure used in conventional reinforced cement concrete buildings), the maximum height of a pre-fabricated building is seven floors.
Cold-form sections are used to fabricate the roof truss as well. A variety of finishing material can be used for external cladding, flooring and roofing works. Only steel is used for the construction of the cold-formed sections of pre-fabricated buildings, while aluminum sheets may be used as an external finishing material on the walls of pre-fabricated buildings.
Pre-fabricated buildings are different from PEBs in terms of raw material and construction technique. Pre-fabricated building use slit coils of galvanized iron (0.95mm to 2mm sheets) to fabricate sections while pre-engineered buildings use hot-rolled plates (8mm to 10mm thickness) that are considerably heavier. In case of pre-fabricated buildings, cold-formed GI sections are not welded, but in case of pre-engineered buildings, steel plates have to be welded to construct the sections.
Pre-fabricated buildings can be used for a variety of applications, such as labor accommodations, site offices, mosques, majlis, villa extensions and security cabins.
The cost of pre-fabricated buildings is almost the same as traditionally constructed buildings; however, the construction time18 is 40% lesser, hence they can be installed and occupied in a shorter span of time. Modular pre-fabricated units are typically 12mx2.5m in size, which makes it easier to transport.
18 Team Analysis and Primary Interviews
Site office
Pre-fabricated buildings Security kiosk
27Manufacture of Structural Metal Products
1.1.4. Architectural Steel FabricationArchitectural steel fabrication comprises steel products made by designing, cutting, bending, welding and assembling processes. These products are used for decorative and non-load-bearing applications, such as entrance gates, decorative doors, steel flush doors, rolling shutters, staircase handrails, and fencing and grills. Architectural steel fabrication products may use decorative accessories of other metals, such as aluminum and brass.
Decorative steel doors
Stee
l han
drai
lsN
on-fi re-rated doors
Fire-rated doors
Entra
nce
gate
1
Entrance gate 2Rolling shutters
Decorative handrails
Win
do
w g
rill
28 Manufacture of Structural Metal Products
19 Designing Buildings Ltd20 Encyclopedia Britannica
Entrance gates are the main gates installed along the compound walls of various buildings. Decorative doors are fabricated with intricate designs and patterns. Steel flush doors include fire-rated doors installed at the fire staircase and lobby areas, and non-fire-rated doors for other purposes.
Architectural steel works serve the needs of a variety of projects, such as villas, multi-story residential buildings, public buildings, commercial buildings and others.
1.1.5. Architectural Aluminum FabricationThis segment includes products that are similar to architectural steel fabrication; however, the metal used here is aluminum instead of steel. Architectural aluminum fabrication includes aluminum and glass works (aluminum and glass doors and windows, curtain walls, skylights and dome), aluminum sheet cladding works, aluminum handrails and fencing, and all aluminum doors, windows and partitions.
Curtain walls are commonly referred to as glass facades or glazing systems that consist of non-structural cladding systems for the external walls of buildings19. These are generally associated with large, high-rise buildings that comprise a lightweight aluminum frame onto which glass can be fixed. Skylights consist of roof openings covered with translucent or transparent glass designed to allow daylight into the building enclosure20. Often skylight, or a portion of it, functions as an operating window to admit air, has found wide application in industrial, commercial and residential buildings. Aluminum sheet cladding works involve cladding of solid aluminum sheets or aluminum composite panels (ACP) on external or internal facades of building.
Curtain wall Skylight
Aluminum window
Aluminum doors
Aluminum sheet cladding
Stainless steel handrail
Metal partition
Fencing
29Manufacture of Structural Metal Products
1.1.6. ScaffoldingThis segment includes metal scaffolding that are temporary structures used for supporting formwork during construction of buildings and are used by workers while building, repairing or cleaning the building. These bear the load of concrete and other construction products during construction. The structures are made using hollow sections, pipes and metal poles.
The scaffolding market21 in Qatar is currently limited to the provision of solutions and services for design, erection and dismantling of scaffolding structures. This market is mainly served by importing scaffolding structures and couplings these are further rented or leased to construction companies. Some of the leading companies include PERI, Cape, Doka, Marcegaglia, Dutco Balfour Beatty and Access Middle East (ACE), which have their manufacturing facilities outside Qatar in various locations, such as Saudi Arabia, the UAE, Germany and Italy. Some of the domestic scaffolding solution providers include Apollo Enterprises, Malzamat Qatar, KEMCO Coating & Scaffolding, Affix Scaffolding, Qatar Plant Hire (Division of Teyseer Group), BICT Qatar, United International Company and Delmon Scaffolding. Currently, there are no domestic scaffolding manufacturers based in Qatar. According to primary interviews, one local firm was set up to manufacture scaffolding by importing raw materials (hot-rolled coils, ERW pipes); however, it was unable to succeed in the market.
Scaffolding manufacturing in Qatar is not considered to be feasible22 due to the following reasons:
1. Business with high volumes and low margins
2. Unavailability of domestic supply of raw materials at competitive rates
3. Stiff competition from dominant scaffolding service providers that are well established in the market, making it difficult to manufacture scaffolding structures using imported raw materials.
21 Primary Interviews22 Team Analysis
30 Manufacture of Structural Metal Products
23 Primary Interviews
1.2. HS Codes of Product Segments
1.2.1. Structural Steel Fabrication
Table 2. HS Codes of Structural Steel Fabrication Products
HS Codes and Description of Structural Steel Fabrication Products
HS code Product Type Description
73011000 Sheet pilingSheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel; sheet piling
73012000 Sheet pilingSheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel; angles, shapes and sections
73081000Steel bridges and bridge sections
Structures (excluding prefabricated buildings of heading 94.06) and parts of structures (for example, bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frame-works, doors and windows and their frames and thresholds for doors; bridges and bridge sections
73082000Steel towers and lattice masts
Structures (excluding prefabricated buildings of heading 94.06) and parts of structures (for example, bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frame-works, doors and windows and their frames and thresholds for doors; towers and lattice masts)
73089060Miscellaneous: steel sheds and domes
Structures (excluding prefabricated buildings of heading 94.06) and parts of structures (for example, bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frame-works, doors and windows and their frames and thresholds for doors); others: sheds and domes
73089090Miscellaneous: steel others
Structures (excluding prefabricated buildings of heading 94.06) and parts of structures (for example, bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frame-works, doors and windows and their frames and thresholds for doors); others: other
1.2.2. Pre-engineered Buildings (PEBs)
Table 3. HS Codes of PEBs
HS Codes and Description of Pre-engineered Buildings
HS code Product Segment Description
94060033 PEB Prefabricated buildings of iron: Warehouses
94060043 PEB Prefabricated buildings of aluminum: Warehouses
94060013 PEB Prefabricated buildings of plastics: Warehouses
94060023 PEB Prefabricated buildings of wood: Warehouses
94060053 PEB Prefabricated buildings of fiberglass: Warehouses
Note23: PEBs are dismantled and shipped during exports. Different components are captured in different HS codes by material type. Hence, HS codes are related to products, by type of buildings.
31Manufacture of Structural Metal Products
1.2.3. Pre-fabricated Buildings
Table 4. HS Codes of Pre-fabricated Buildings
HS Codes and Description of Pre-fabricated Buildings
HS code Product Sub-segment Description
94060011 Pre-fabricated green houses Pre-fabricated buildings of plastics: Greenhouses for cultivation purposes
94060014 Pre-fabricated labor camps Pre-fabricated buildings of plastics: Buildings for residence or school
94060019 Pre-fabricated private units Pre-fabricated buildings of plastics: Other
94060021 Pre-fabricated green houses Pre-fabricated buildings of wood: Greenhouses for cultivation purposes
94060024 Pre-fabricated labor camps Pre-fabricated buildings of wood: Buildings for residence or school
94060029 Pre-fabricated private units Pre-fabricated buildings of wood: Other
94060031 Pre-fabricated green houses Pre-fabricated buildings of iron: Greenhouses for cultivation purposes
94060034 Pre-fabricated labor camps Pre-fabricated buildings of iron: Buildings for residence or school
94060039 Pre-fabricated private units Pre-fabricated buildings of iron: Other
94060041 Pre-fabricated green housesPre-fabricated buildings of aluminum: Greenhouses for cultivation purposes
94060044 Pre-fabricated labor camps Pre-fabricated buildings of aluminum: Buildings for residence or school
94060049 Pre-fabricated private units Pre-fabricated buildings of aluminum: Other
94060051 Pre-fabricated green housesPre-fabricated buildings of fiberglass: Greenhouses for cultivation purposes
94060054 Pre-fabricated labor camps Pre-fabricated buildings of fiberglass: Buildings for residence or school
94060059 Pre-fabricated private units Pre-fabricated buildings of fiberglass: Other
94060090 Pre-fabricated private units Pre-fabricated buildings of other materials
Note24: Pre-fabricated buildings are dismantled and shipped during exports. Different components are captured in different HS codes by material type. Hence, HS codes are related to products, by type of buildings.
24 Primary Interviews
32 Manufacture of Structural Metal Products
1.2.4. Architectural Steel Fabrication
Table 5. HS Codes of Architectural Steel Fabrication Products
HS Codes and Description of Architectural Steel Fabrication Products
HS code Product Sub-segment Description
73083000Steel doors and windows
Structures (excluding prefabricated buildings of heading 94.06) and parts of structures (for example, bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frame-works, doors and windows and their frames and thresholds for doors; doors, windows and their frames and thresholds for doors)
73089050 Steel staircase railing
Structures (excluding prefabricated buildings of heading 94.06) and parts of structures (for example, bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frame-works, doors and windows and their frames and thresholds for doors; other: staircases, fixed)
73142000 Steel grills and fencing
Cloth (including endless bands), grill, netting and fencing, of iron or steel wire; expanded metal of iron or steel; grill, netting and fencing, welded at the intersection, of wire with a maximum cross sectional dimension of 3mm or more and having a mesh size of 100 sq cm or more
73143100 Steel grills and fencingCloth (including endless bands), grill, netting and fencing, of iron or steel wire; expanded metal of iron or steel; other grill, netting and fencing, welded at the intersection: plated or coated with zinc
73143900 Steel grills and fencingCloth (including endless bands), grill, netting and fencing, of iron or steel wire; expanded metal of iron or steel; other grill, netting and fencing, welded at the intersection: other
73144100 Steel grills and fencingCloth (including endless bands), grill, netting and fencing, of iron or steel wire; expanded metal of iron or steel; other cloth, grill, netting and fencing: plated or coated with zinc
73144200 Steel grills and fencingCloth (including endless bands), grill, netting and fencing, of iron or steel wire; expanded metal of iron or steel; other cloth, grill, netting and fencing: coated with plastics
73144900 Steel grills and fencingCloth (including endless bands), grill, netting and fencing, of iron or steel wire; expanded metal of iron or steel; other cloth, grill, netting and fencing: other
73145000 Steel grills and fencingCloth (including endless bands), grill, netting and fencing, of iron or steel wire; expanded metal of iron or steel; expanded metal
33Manufacture of Structural Metal Products
1.2.5. Architectural Aluminum Fabrication
Table 6. HS Codes of Architectural Aluminum Fabrication
HS Codes and Description of Architectural Aluminum Fabrication
HS code Product Sub-segment Description
76101010Aluminum doors, windows and partition
Aluminum structures (excluding pre-fabricated buildings of heading 94.06) and parts of structures (for example, bridges and bridge-sections, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, bal: doors, windows and their frames and thresholds for doors: electrically operated doors for garages
76109040Aluminum staircase railing and fencing
Aluminum structures (excluding pre-fabricated buildings of heading 94.06) and parts of structures (for example, bridges and bridge-sections, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, bal: other: staircases, fixed
76109050Aluminum doors, windows and partition
Aluminum structures (excluding pre-fabricated buildings of heading 94.06) and parts of structures (for example, bridges and bridge-sections, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors) bal: other: wall partitions for hospital word, restaurants, offices, bathroom, buildings and the like
76169960Aluminum staircase railing and fencing
Other articles of aluminum; other: other: fencing pillars
76101090Aluminum doors, windows and partition
Aluminum structures (excluding pre-fabricated buildings of heading 94.06) and parts of structures (for example, bridges and bridge-sections, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames, and thresholds for doors) bal: doors, windows and their frames and thresholds for doors: other
1.3. Raw Materials Raw materials used in the manufacture of product segments from this sector include products such as angles, channels, sections, sheet and plates, which are imported from other countries or procured from local traders. Currently, a small volume of steel angles, channels, aluminum composite sheets and aluminum profiles are manufactured25 in Qatar. Most aluminum and steel fabricators26 rely heavily on import of raw material from the UAE, China, India and Turkey.
Table 7. Raw Materials Consumed
Raw Materials Consumed in Metal Fabrication
Product Segment Raw Materials
Architectural and structural steel fabrication
Steel angles, channels, sections, rods, sheets and plates, consumables, paint, etc.
PEBs Steel plates and sheets, consumables, paint, etc.
Pre-fabricated buildings
Galvanized iron slit coils, hot-rolled sections for plinth support and footing on ground.
Exteriors made from various materials, such as rockwool, fiberglass, wood and aluminum-based on user specifications
Architectural aluminum fabrication
Aluminum profiles, aluminum sheets, glass, silicon, paint, consumable, etc.
25, 26 Primary Interviews
34 Manufacture of Structural Metal Products
1.3.1. HS codes of Raw Materials
Table 8. HS Codes of Steel Raw Materials
HS Codes of Steel Raw Materials
HS code Product Type Description
72081000 Hot-rolled coilsFlat-rolled products of iron or non-alloy steel, of a width of 600mm or more, hot-rolled, not clad, plated or coated in coils, not further worked than hot-rolled, with patterns in relief
72082500 Hot-rolled coilsFlat-rolled products of iron or non-alloy steel, of a width of 600mm or more, hot-rolled, not clad, plated or coated. Other, in coils, not further worked than hot rolled, pickled: of a thickness of 4.75mm or more
72082600 Hot-rolled coilsFlat-rolled products of iron or non-alloy steel, of a width of 600mm or more, hot-rolled, not clad, plated or coated. Other, in coils, not further worked than hot rolled, pickled: of a thickness of 3mm or more but less than 4.75mm
72082700 Hot-rolled coilsFlat-rolled products of iron or non-alloy steel, of a width of 600mm or more, hot-rolled, not clad, plated or coated. Other, in coils, not further worked than hot-rolled, pickled: of a thickness of less than 3 mm
72083600 Hot-rolled platesFlat-rolled products of iron or non-alloy steel, of a width of 600mm or more, hot-rolled, not clad, plated or coated. Other, in coils, not further worked than hot-rolled: of a thickness exceeding 10mm
72083700 Hot-rolled platesFlat-rolled products of iron or non-alloy steel, of a width of 600mm or more, hot-rolled, not clad, plated or coated. Other, in coils, not further worked than hot-rolled: of a thickness of 4.75mm or more, but not exceeding 10mm
72083800 Hot-rolled sheetsFlat-rolled products of iron or non-alloy steel, of a width of 600mm or more, hot-rolled, not clad, plated or coated. Other, in coils, not further worked than hot-rolled: of a thickness of 3mm or more, but less than 4.75mm
72083900 Hot-rolled coilsFlat-rolled products of iron or non-alloy steel, of a width of 600mm or more, hot-rolled, not clad, plated or coated. Other, in coils, not further worked than hot-rolled: of a thickness of less than 3mm
72084000 Hot-rolled sheetsFlat-rolled products of iron or non-alloy steel, of a width of 600mm or more, hot-rolled, not clad, plated or coated, not in coils, not further worked than hot-rolled, with patterns in relief
72085100 Hot-rolled platesFlat-rolled products of iron or non-alloy steel, of a width of 600mm or more, hot-rolled, not clad, plated or coated. Other, not in coils, not further worked than hot-rolled: of a thickness exceeding 10mm
72085200 Hot-rolled platesFlat-rolled products of iron or non-alloy steel, of a width of 600mm or more, hot-rolled, not clad, plated or coated. Other, not in coils, not further worked than hot-rolled: of a thickness of 4.75mm or more but not exceeding 10mm
35Manufacture of Structural Metal Products
HS Codes of Steel Raw Materials
HS code Product Type Description
72085300 Hot-rolled sheetsFlat-rolled products of iron or non-alloy steel, of a width of 600mm or more, hot-rolled, not clad, plated or coated. Other, not in coils, not further worked than hot-rolled: of a thickness of 3mm or more, but less than 4.75mm
72085400 Hot-rolled sheetsFlat-rolled products of iron or non-alloy steel, of a width of 600mm or more, hot-rolled, not clad, plated or coated. Other, not in coils, not further worked than hot-rolled: of a thickness of less than 3mm
72089000 Hot-rolled sheetsFlat-rolled products of iron or non-alloy steel, of width 600mm or more, hot-rolled, not clad, plated or coated. Other
72091500 Cold-rolled coilsFlat-rolled products of iron or non-alloy steel, of a width of 600mm or more, cold-rolled (cold-reduced), not clad, plated or coated. In coils, not further worked than cold-rolled (cold-reduced): of a thickness of 3mm or more
72091600 Cold-rolled coilsFlat-rolled products of iron or non-alloy steel, of a width of 600mm or more, cold-rolled (cold-reduced), not clad, plated or coated. In coils, not further worked than cold-rolled (cold-reduced): of a thickness exceeding 1mm but less than 3mm
72091800 Cold-rolled coilsFlat-rolled products of iron or non-alloy steel, of a width of 600mm or more, cold-rolled (cold-reduced), not clad, plated or coated. In coils, not further worked than cold-rolled (cold-reduced): of a thickness of less than 0.5mm
72092500 Cold-rolled coilsFlat-rolled products of iron or non-alloy steel, of a width of 600mm or more, cold-rolled (cold-reduced), not clad, plated or coated. Not in coils, not further worked than cold-rolled (cold-reduced): of a thickness of 3mm or more
72092600 Cold-rolled coilsFlat-rolled products of iron or non-alloy steel, of a width of 600mm or more, cold-rolled (cold-reduced), not clad, plated or coated. Not in coils, not further worked than cold-rolled (cold-reduced): of a thickness exceeding 1mm, but less than 3mm
72099000 Cold-rolled coilsFlat-rolled products of iron or non-alloy steel, of a width of 600mm or more, cold-rolled (cold-reduced), not clad, plated or coated. Other
72111300 Hot-rolled sheets
Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated. Not further worked than hot-rolled: rolled on four faces or in a closed box pass, of a width exceeding 150mm and a thickness of not less than 4mm, not in coils and without patterns in relief
72111400 Hot-rolled sheetsFlat-rolled products of iron or non-alloy steel, of a width of less than 600mm, not clad, plated or coated. Not further worked than hot-rolled. Other, of a thickness of 4.75mm or more
72111900 Hot-rolled sheetsFlat-rolled products of iron or non-alloy steel, of a width of less than 600mm, not clad, plated or coated. Not further worked than hot-rolled. Other
36 Manufacture of Structural Metal Products
HS Codes of Steel Raw Materials
HS code Product Type Description
72112300 Cold-rolled coilsFlat-rolled products of iron or non-alloy steel, of a width of less than 600mm, not clad, plated or coated. Not further worked than cold-rolled (cold reduced): containing by weight less than 0.25% of carbon
72112900 Cold-rolled coilsFlat-rolled products of iron or non-alloy steel, of a width of less than 600mm, not clad, plated or coated. Not further worked than cold-rolled (cold-reduced): Other
72119000 Cold-rolled coilsFlat-rolled products of iron or non-alloy steel, of a width of less than 600mm, not clad, plated or coated. Other
72161000Angles, shapes and sections
Angles, shapes and sections of iron or non-alloy steel. U-, I- or H- sections, not further worked than hot-rolled, hot drawn or extruded, of a height of less than 80mm
72162100Angles, shapes and sections
Angles, shapes and sections of iron or non-alloy steel. L- or T-sections, not further worked than hot-rolled, hot drawn or extruded, of a height of less than 80mm: L-sections
72162200Angles, shapes and sections
Angles, shapes and sections of iron or non-alloy steel. L- or T-sections, not further worked than hot-rolled, hot drawn or extruded, of a height of less than 80mm: T-sections
72163100Angles, shapes and sections
Angles, shapes and sections of iron or non-alloy steel. U-, I- or H- sections, not further worked than hot-rolled, hot drawn or extruded of a height of 80mm or more: U-sections
72163200Angles, shapes and sections
Angles, shapes and sections of iron or non-alloy steel. U-, I- or H-sections, not further worked than hot-rolled, hot drawn or extruded of a height of 80mm or more: I-sections
72163300Angles, shapes and sections
Angles, shapes and sections of iron or non-alloy steel. U-, I- or H-sections, not further worked than hot-rolled, hot drawn or extruded of a height of 80mm or more: H-sections
72164000Angles, shapes and sections
Angles, shapes and sections of iron or non-alloy steel. L- or T-sections, not further worked than hot-rolled, hot drawn or extruded, of a height of 80mm or more
72165000Angles, shapes and sections
Angles, shapes and sections of iron or non-alloy steel. Other angles, shapes and sections, not further worked than hot-rolled, hot drawn or extruded
72166100Angles, shapes and sections
Angles, shapes and sections of iron or non-alloy steel. Angles, shapes and sections, not further worked than cold formed or cold finished: obtained from flat-rolled products
72166900Angles, shapes and sections
Angles, shapes and sections of iron or non-alloy steel. Angles, shapes and sections, not further worked than cold formed or cold finished: Other
72169100Angles, shapes and sections
Angles, shapes and sections of iron or non-alloy steel. Other: cold formed or cold finished from flat-rolled products
72169900Angles, shapes and sections
Angles, shapes and sections of iron or non-alloy steel. Other
72191100 Hot-rolled platesFlat-rolled products of stainless steel, of a width of 600mm or more. Not further worked than hot-rolled, in coils: of a thickness exceeding 10mm
72191200 Hot-rolled platesFlat-rolled products of stainless steel, of a width of 600mm or more. Not further worked than hot-rolled, in coils: of a thickness of 4.75mm or more but not exceeding 10mm
72192100 Hot-rolled platesFlat-rolled products of stainless steel, of a width of 600mm or more. Not further worked than hot-rolled, not in coils: of a thickness exceeding 10mm
37Manufacture of Structural Metal Products
HS Codes of Steel Raw Materials
HS code Product Type Description
72192200 Hot-rolled platesFlat-rolled products of stainless steel, of a width of 600mm or more. Not further worked than hot-rolled, not in coils: of a thickness of 4.75mm or more but not exceeding 10mm
72193100 Cold-rolled platesFlat-rolled products of stainless steel, of a width of 600mm or more. Not further worked than cold-rolled (cold reduced): of a thickness of 4.75mm or more
72201100 Hot-rolled platesFlat-rolled products of stainless steel, of a width of less than 600mm.: Not further worked than hot-rolled: of a thickness of 4.75mm or more
72224000Angles, shapes and sections
Other bars and rods of stainless steel; angles, shapes and sections of stainless steel. Angles, shapes and sections
72287000Angles, shapes and sections
Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. Angles, shapes and sections
73063000 Hollow sectionsOther tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. Other, welded, of circular cross section, of iron or non-alloy steel
73064000 Hollow sectionsOther tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. Other, welded, of circular cross section, of stainless steel
73065000 Hollow sectionsOther tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. Other, welded, of circular cross section, of other alloy steel
73066000 Hollow sectionsTubes, pipes and hollow profiles, welded, having a non-circular cross section, of iron or steel (excluding seamless, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas)
73066100 Hollow sections Of square or rectangular cross-section
73066900 Hollow sections Other, welded, of non-circular cross section of other non-circular cross section
73069000 Hollow sectionsOther tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel. Other
Table 9. HS Codes of Aluminum Raw Materials
HS Codes of Aluminum Raw Materials
HS code Product Type Description
76042100 Aluminum profiles Aluminum bars, rods and profiles hollow profiles
76042900 Aluminum profiles Aluminum bars, rods and profiles, other
76082000 Aluminum profiles Aluminum tubes and pipes of aluminum alloys
76061200 Aluminum sheetsAluminum plates, sheets and strip, of a thickness exceeding 0.2 mm.: Rectangular (including square) : Of aluminum alloys
38 Manufacture of Structural Metal Products
2. Structural Steel Fabrication
2.1. Qatar Market OverviewStructural steel fabrication is an important part of the structural metal products sector. It includes the fabrication of load bearing structural frame comprising columns, beams, trusses, etc., for a wide range of projects, such as factory sheds, warehouses, infrastructure projects, stadia, real estate development and other industrial sector projects.
In terms of market size, in 2015, the structural steel fabrication market was valued at QAR4,107mn27, forming 53.1% of the structural metal products sector that was sized at QAR7,733mn in 2015.
Due to the slowdown in the construction sector, the market size reduced by 20.9%, in value terms, from QAR4,107mn in 2015 to QAR3,247mn in 2016.
Qatar has 467 firms in the steel fabrication segment. Most steel fabrication units have capabilities to undertake both architectural steel fabrication and structural steel fabrication works.
Qatar’s focus on economic diversification and the development of the SME sector would offer impetus to the manufacturing sector. Industrial developments are expected to form28 65% of the market opportunity in the structural steel fabrication market.
Going forward, the structural steel fabrication market is expected to grow at a CAGR of 4.0% from QAR3,247mn in 2016 to an estimated QAR4,804mn (456,740MT) in 2026.
2.1.1. Demand-Side Analysis
2.1.1.1. Historical and Current Market Size
Between 2001 and 2003, Qatar’s structural steel fabrication market29 was relatively flat, with demand ranging from 53,243MT to 57,482MT per annum. The steel fabrication demand received a major boost in 2004, when the market grew nearly 2.88 times in a single year to reach 165,146MT in 2004, chiefly on account of the new industrial developments and demands arising from the construction work related to the Asian Games 2006, such as stadia, The Torch, Doha building and other projects.
Thereon, driven by the increased industrial developments, real estate boom and Qatar Government’s construction sector spend, the market size grew from strength to strength, pacing up rapidly at a CAGR of 22.5% to reach 454,995MT in 2009.
Between 2003 and 2008, the global macroeconomic factors drove commodity prices northward. On the back of buoyant demand, in quantity terms and escalating crude steel prices, Qatar’s structural steel fabrication market grew nearly 13.8 times in value terms, from QAR331mn in 2004 to QAR4,547mn in 2009.
The impact of the global financial crisis of 2008 and 2009 on Qatar’s steel fabrication market size was observed in 2010. Many projects launched during 2004 and 2008 were due for completion in 2008 and 2009, the impact of the slowdown was witnessed in 2010, with a lag of 12 to 18 months.
In 2009 and 2010, in terms of value and quantity, the market shrank 52.3% and 41.2%, respectively. This was likely as the demand slowed down and steel commodity prices crashed simultaneously. The decline continued until 2011, post which the market
27,29 Team Analysis28 Primary Interviews
39Manufacture of Structural Metal Products
sentiment started improving due to the Qatar Government’s successful bid for the FIFA World Cup 2022, increasing government’s expenditure and launch of new projects.
Qatar’s structural steel fabrication market grew from 237,981MT in 2011 to reach an estimated 441,684MT in 2015, registering a CAGR of 16.7% during this period.
Chart 1. Qatar's Structural Steel Fabrication Demand, 2001 to 2015
Source: Team Analysis, MDPS Annual Bulletin of Industry and Energy Statistics 2001-2015, ITC Trademap
2.1.1.2. Market Size Segmentation by Products
The 2015 market for structural steel fabrication amounted to 441,684MT30. Primary interviews with steel fabrication units indicate that structural steel fabrication for factory sheds and warehouses form 50% of the demand followed by real estate developments at 15% and infrastructure projects at 10%. Steel fabrication demand arising from oil and gas, petrochemical, water and power sector projects together formed 10% of this segment. Thus, industrial developments constituted 65% of the demand.
2.1.1.3. Demand Drivers
Demand Drivers: Demand for structural steel fabrication is chiefly driven by factory sheds and warehouses, followed by commercial projects and infrastructure developments (airports, seaports, metro rail stations, etc.).
Customer Segment: Steel fabrication units31 in the Qatar market opine that civil contractors are the customer segment. As structural steel fabrication products are load-bearing elements, they are procured by contractors at the construction commencement stage.
Chart 2. Structural Steel Fabrication Market Segmentation, 2015
30 Team Analysis31 Primary Interviews
QA
R m
n
Tho
usan
d M
T
0
500
1,000
1,500
2,000
2,500
3,000
3,500
4,000
4,500
5,000
0
100
200
300
400
500
600
700
2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015
57
272
53
144
57
195 165
331
147
994
245
1,464
318
2,605
418
3,996
455
4,547
267
2,168
238
1,691
243
2,021
220
2,222
317
2,770
442
4,107
Structural Steel Fabrication Market Size (Volume, 000's MT) Structural Steel Fabrication Market Size (Value, QAR mn)
9% Others
2% Stadium
4% Metro Rail
10% Oil, Gas, PetroChem, Power, Water
10% Infrastructure
15% Real Estate
50%Factory andWarehouses
Oil, Gas, PetroChem, Power, Water Metro Rail Stadium
Factory & Warehouses Real Estate Infrastructure Others
Source: Team Analysis, Primary Interviews
40 Manufacture of Structural Metal Products
Key Influencers: Engineering consultants can influence the decision on the selection of structural steel fabrication units. Consultants estimate the steel requirement, choose the specifications, and incorporate them in their designs and tenders. They may evaluate the tender for compliance with requirements. Primary interviews indicate that apart from cost competitiveness, being listed as an approved vendor with consultants is important. In some cases, business relationships (backward integration with steel fabrication units with civil contractors) may also influence the decision.
2.1.1.4. Demand Forecast
Due to the slowdown in the construction sector, the market size32 reduced by 20.9%, in value terms, from QAR4,107mn in 2015 to QAR3,247mn in 2016.
Going forward, the structural steel fabrication market is expected to grow at a CAGR of 4.0% from QAR3,247mn in 2016, to an estimated QAR4,804mn (456,740MT) in 2026.
The projected market size includes structural steel fabrication work for the metro rail stations and world cup stadia. The demand from metro railway stations would arise in two phases33 in accordance with their respective construction schedules: the first schedule during 2015 and 2018, with most of it concentrated in 2016 and 2017, and the second schedule during 2022 and 2024. The metro rail project is estimated to require 198,080MT of structural steel fabrication works. During 2016, 2017 and 2022 to 2024, the country is likely to witness increased opportunities as compared to other years, as most of the structural steel works for metro rail (phase 1 and phase 2) are expected to be executed during these years.
For the FIFA World Cup 2022, steel fabrication work for stadium is expected to be executed during 2014 and 2019, with most of it taking place during 2015 and 2017 where stadia would require 104,224MT of structural steel fabrication works.
32 Team Analysis33 Zawya Database on projects in Qatar
Chart 3. Qatar’s Structural Steel Fabrication Demand Forecast, 2015 to 2026
Structural Steel Fabrication Market Size (Volume, 000's MT) Structural Steel Fabrication Market Size (Value, QAR mn)
QA
R m
n
0
500
1,000
1,500
2,000
2,500
3,000
3,500
4,000
4,500
5,000
0
100
200
300
400
500
600
700
Tho
usan
d M
T
2015
442
4,107
2016E
427
3,247
2017F
474
3,187
2018F
411
2,911
2019F
401
2,981
2020F
403
3,152
2021F
409
3,356
2022F
444
3,825
2023F
453
4,104
2024F
463
4,404
2025F
447
4,471
2026F
457
4,804
Source: Team Analysis, MDPS Annual Bulletin of Industry and Energy Statistics 2001-2015, ITC Trademap
41Manufacture of Structural Metal Products
2.1.2. Supply-Side Analysis
2.1.2.1. Market Structure
The structure of Qatar’s structural steel fabrication market that comprises about 467 firms is fragmented. Based on their capacities, structural steel fabrication firms can be classified as large, medium and small. Most steel fabrication units have capabilities to undertake both architectural steel fabrication and structural steel fabrication works.
34, 37 Primary Interviews35,36 Team Analysis
Chart 4. Qatar’s Structural Steel Fabrication Market Structure and Capacity Utilization
1.0% Small
68.5% Medium
30.4% Large
0
50,000
100,000
150,000
200,000
250,000
300,000
350,000
400,000
450,000
500,000
185,529
Large
390,555
Medium
8,730
Small0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
%MT
64.4%60.2%
43.1%
Installed capacity Capacity Utilization (%)
Source: Team Analysis, Primary Interviews, MDPS Annual Bulletin of Industry and Energy Statistics 2015
Large-sized Firms
Qatar’s 10 leading firms form the group of large-sized firms. They collectively have 30.4% share36 of the sales by domestic players in terms of quantity and concentrate on structural steel fabrication jobs (92.5% share of the capacity37).
Medium-sized Firms
Qatar is home to 263 medium-sized firms, each having an average capacity greater than 380MT per annum and less than 12,000 MT per annum of steel fabrication per month. The medium-sized firms, collectively have 68.5% share of the sales by domestic players in volume terms. In case of medium-sized firms, on an average, 82.5% of the capacity is dedicated for structural steel fabrication works.
Small-sized Firms
Based on insights from primary interviews, these firms have capacities not greater than 380MT per annum. These units have less than 10 employees and 30% of their capacities34 focus on structural steel fabrication works for small to mid-sized projects, such as low-rise residential buildings and small commercial establishments. Small job orders, such as roof-over parking areas, small storage sheds, metal roofs on terraces gardens and other miscellaneous works, are done by small players. Qatar has 194 such firms who collectively control 1.0% share35 of the structural steel fabrication sales by domestic players.
42 Manufacture of Structural Metal Products
In terms of products and services, the leading players have well-developed capabilities and focus on a wide range of projects, such as industrial sheds, warehouses, stadia, metro rails and infrastructure. These also have in-house capabilities across the value chain of steel fabrication, such as designing, estimating and tendering, fabrication and related activities, and erection on site. In case of highly specialized projects, such as stadia that require specialized expertise in site erection, international contractors may be appointed for erection work.
Large-sized firms have an average capacity utilization rate of 60.2%, followed by medium-sized firms at 64.2%, with small firms lagging behind at 43.1%. The overall industry capacity utilization rate is 62.8%38.
Table 10. Structural Steel Fabrication Market Structure Snapshot
Structural steel fabrication Units Large Medium Small Total
Number of players Number 10 263 194 467
Average monthly capacity per player MT 1,671.4 150.0 12.5
Average percentage share of capacity used for structural works % 92.5% 82.5% 30.0%
Structural fabrication average capacity p.a. per player MT 18,553 1,485.0 45.0
Capacity per category – structural works MT 185,529 390,555 8,730 584,814
Market share % 30.4% 68.5% 1.0% 100%
Sales MT 111,737 251,502 3,760 366,999
Capacity utilisation % 60.2% 64.4% 43.1% 62.8%
Source: Team Analysis, Primary interviews, MDPS Annual Bulletin of Industry and Energy Statistics 2015
2.1.2.2. Profiling of Key Domestic Players
Profiling of key players in the market has been provided below.
Table 11. Structural Steel Fabrication: Key Domestic Players
Company GroupYear of
EstablishmentKey Products/Projects
Installed Capacity (MT per annum)
SOLB26 Al Misnad Group 2007• Stadia• Commercial and multi-story
42,000
EversendaiQatari Investors
Group2006
• Turnkey contracts for high-rise buildings• Oil and Gas• Large industrial plants• Power plants
24,000
Frijns Qatar Al Faisal Group 2009• Metro rail, airport, industrial projects
and sheds• Commercial projects
20,400
HBKHBK Contracting Company W.L.L.
1970
• Framework for bridges• Fabrication for metro rail• Buildings, infrastructure and factory sheds• Gates, grill, doors, shutter, windows and
fencing grill
18,000
Gulf SteelSalam International
Investments Limited
1989• Structural Steel Fabrication for metro rail,
stadium, airport, industrial, commercial and architectural works
12,000
38 Team Analysis
43Manufacture of Structural Metal Products
Company GroupYear of
EstablishmentKey Products/Projects
Installed Capacity (MT per annum)
Al WadiEquipment Rental Trading Company
1971
• Steel building• Canopies• Parameters• Car sheds• Fences• Handrail • PEB
12,000
IronMount Grand Mart Group 2012
• High-rise buildings• Oil and Gas• Aviation • Industrial projects• Warehouses and showroom• Commercial steel bridges
12,000
Qatar Indo Fab
SASCO Group 2006
• Beams and Columns• Bridges• Tanks• Gratings• Equipment parts
12,000
Steel Master NA 2011
• Hot-rolled steel structures• Warehouses shades• Staircase• Gates, grills, handrail, cladding, hangers • Erection of structural steel works
6,000
Steel Engineering Technology
NA 2013
• Steel buildings• PEBs• Pipe racks • Warehouses
6,000
Leo Steel NA 1990
• Airport extension• Railway and stadium• Roofing works,• Various steel doors and windows
3,600
Doha Quick Space
NA 2006• Car shades• Hangers, fencing, entrance cover• Canopy
1,500
2.1.2.3. Business Model Analysis
Given the low entry barriers, widespread application of steel and large market size, structural steel fabrication has been an attractive sector for Qatari entrepreneurs. With several firms operating in the market and each targeting the same project, competition to win contracts is intense. These factors have shaped the business model of several leading civil contractors in Qatar.
Success in any industrial venture requires confluence of important parameters, such as (a) access to markets, (b) operational expertise, (c) access to funds, and (d) access to raw material.
Leading firms such as Eversendai Qatar and Frijns Qatar are a result of the joint ventures between international steel fabrication contractors and established Qatari business groups. This combines all of the above success factors — chief among them being winning contracts i.e., access to markets.
Primary interviews with fabricators have indicated that leading civil contractors prefer to award a major portion of the steel fabrication contracts to in-house steel fabrication units or to affiliated and related entities. Most large-sized and medium-sized firms have strategic linkages with established civil contractors in the form of holding-subsidiary relationship by the virtue of being a sister concern.
44 Manufacture of Structural Metal Products
2.1.2.4. Domestic Production Competitiveness
Access to inexpensive raw material and to large market underlines the profitability and feasibility of any industrial venture. The key factors that influence the competitiveness of domestic production of structural steel fabrication units include raw material, labor, market size and the impact of competition.
Raw Material: Qatar does not have domestic production of raw material, such as steel plates, sheets and heavy sections. The domestic raw material production capacity is underdeveloped, limited to small sections (less than 80mm). Hence, all structural steel fabrication units in Qatar depend on imports to meet their raw material needs.
Our primary research indicates that raw material is procured from countries such as China, India, Saudi Arabia, Turkey and the UAE. Expensive raw material significantly impacts the cost of domestically produced finished goods.
High Operational Expenses: Our primary interviews indicate that operational costs are significantly higher in Qatar than in nations exporting to Qatar, i.e., China, India, the UAE, Turkey, etc. This adversely affects the price competitiveness of domestic production. Operational expenses are affected by high rent for accommodation that drives the salaries, and the rent for non-residential spaces increases the fixed expenses.
Time to Market: According to industry players, procuring raw material is time consuming, which leaves very little time to
fabricate and deliver finished products to customers. Due to this, raw material inventory quantity requirement increases. This increases the short-term interest payments, which adversely affect price competitiveness. Chinese imports reach Qatar in 25 to 45 days; the same time is required by steel fabrication units to locally produce finished goods.
Number of Players: Due to the fragmented nature of the market and the large number of players (467 players), steel fabrication market in Qatar is characterized by fierce competition and price sensitivity. Prices for all types of players, such as large, medium and small, vary based on the type of project, design and level of complexity. Large players handle complex projects that require special skills, capabilities and equipment. As compared to them, the small- and medium-sized players focus on project involving less complexity.
2.1.3. Trade Analysis
2.1.3.1. Historical Trade Analysis
The analysis of historical import data indicates that imports increased from 46,668MT in 2001 to 297,878MT in 2008, indicating a CAGR of 30.3%. In value terms, the imports grew at a CAGR of 43.2% from QAR180mn in 2001 to QAR2,225mn in 2008. Thereon, imports decreased due to economic slowdown of 2009. The imports have reduced from 152,217MT (QAR1,083mn) in 2010 to 76,349MT (QAR409mn) in 2015.
Source: ITC Trademap, Team Analysis
QA
R m
n
Tho
usan
d M
T
0
50
100
150
200
250
300
350
0
500
1,000
1,500
2,000
2,500
20072001 2002 2003 2004 2005 2006 2008 2009 2010 2011 2012 2013 2014 2015
44
Structural Steel Fabrication Imports (Volume, 000's MT) Structural Steel Fabrication Imports (Value, QAR mn)
205
47
180 200
47
331142
228
134
686
213
1,301
1,722
298
2,225
284
1,883
152
1,083
149
798
110
711
75
526
99
508
76
409
Chart 5. Qatar’s Structural Steel Fabrication Imports, 2001 to 2015
45Manufacture of Structural Metal Products
Structural steel fabricated products imported by Qatar in 2015 include bridges and bridge sections (49%), sheet piling (36%), steel towers and lattice masts (8%) and steel sheds and domes (4%)
The analysis of historical export data39 indicates that exports form a very small segment as compared to the domestic market. Export volumes increased from 613MT in 2001 to 1,274MT in 2015, indicating a CAGR of 7.4%.
Chart 7. Qatar’s Structural Steel Fabrication Exports, 2001 to 2015
2008
QA
R m
n
Tho
usan
d M
T
0
1
2
3
4
5
6
7
8
0
50
100
150
200
250
300
350
400
2001 2002 2003 2004 2005 2006 2007 2009 2010 2011 2012 2013 2014 2015
Structural Steel Fabrication Exports (000s,MT) Structural Steel Fabrication Exports (QAR mn)
0.6
433.6
198
3.4
279
4.5
360
5.7
114
3.1
316
3.6
337
4.1
21
5.2
13
7.3
17
4.3
26
3.7
29 1.31.7
520
Source: ITC Trademap, Team Analysis
3% Others
4% Steel sheds and domes
8% Steel towers and lattice masts
36% Sheet piling
49%Steel bridges and
bridge sections
Steel sheds and domes Others
Steel bridges and bridge sections Sheet piling
Steel towers and lattice masts
Structural Steel Fabrication
Imports 76,349 MT
Source: ITC Trademap, Team Analysis
Chart 6. Structural Steel Fabrication Imports by Products, 2015
39 ITC Trademap
46 Manufacture of Structural Metal Products
Source: ITC Trademap, Team Analysis
40 ITC Trademap
Export segmentation: Key structural steel products exported from Qatar include bridges and bridge sections that accounts for 71% share of exports, followed by steel sheds and domes (15%), sheet piling (5%), steel towers and lattice masts (3%).
Chart 8. Structural Steel Fabrication Exports by Products, 2015
6% Others
15% Steel shedsand domes
3% Steel towers and
lattice masts
5% Sheet piling
71%Steel bridges and
bridge sections
Steel bridges and bridge sections Steel sheds and domes
Sheet piling Steel towers and lattice mastsOthers
Structural Steel Fabrication
Exports 1,664 MT
2.1.3.2. Trade by Source and Destination
Imports: The analysis of structural steel fabricated products imports40 amounting to 661,806MT from 2010 to 2015 indicates that the UAE (32%), Saudi Arabia (26%), Turkey (9%) and China (5%) are the major sources of structural steel imports.
Chart 9. Key Sources of Structural Steel Fabrication Imports, 2010 to 2015
Saudi Arabia
Turkey
China
USA
Rest of the World
UAE
2010 2011 2012 2013 2014 2015
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Source: ITC Trademap, Team Analysis
47Manufacture of Structural Metal Products
41 ITC Tradevmap
The area graph shown above indicates that the share of top five countries reduced from 87.4% in 2012 to 60.6% in 2015. The increasing share of the rest of the world since 2012 indicates that Qatar-based importers are increasingly looking at newer sources for importing structural steel fabrication products. Key sources of imports that have dominated across past six years are the UAE and Saudi Arabia.
Exports: The analysis of structural steel fabricated product exports41 from Qatar amounting to 23,416MT from 2010 to 2015 indicates that the UAE (38%), Saudi Arabia (31%), Korea (8%) and Kuwait (7%) are the major destinations for structural steel exports.
Source: ITC Trademap, Team Analysis
Saudi Arabia
South Korea
KenyaKuwait
Rest of the World
UAE
2010 2011 2012 2013 2014 2015
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Chart 10. Key Destinations for Structural Steel Fabrication Exports, 2010 to 2015
The area graph shown above indicates that the share of top five countries increased from 80.1% in 2010 to 93.0% in 2015. The small quantity of structural steel fabrication products that Qatar exports is targeted toward nearby countries, such as the UAE, Saudi Arabia and Kuwait. During 2010 to 2015, the share of the UAE decreased, while that for Saudi Arabia increased consistently.
48 Manufacture of Structural Metal Products
42, 43 Team Analysis
Source: Team Analysis, ITC Trademap
2.1.3.3. Share of Imports in Domestic Consumption
Between 2001 and 2006, about 81% to 91% of Qatar’s steel fabrication requirements, in quantity terms, were met by imports. On the back of rapid market growth during 2003 and 2008, the widening demand–supply gap during this period drove the establishment of new domestic units. The share42 of imports in consumption fell steadily from 91% in 2005 to 17% in 2015.
Chart 11. Qatar’s Structural Steel Fabrication Imports v/s Domestic Sales, 2001 to 2015
47
57
81%
44
53
83%
47
57
82%
142
165
86%
134
147
91%
113
205
31865%
120
298
418
71%
171
284
455
62%
115
152
26757%
89
149
238
63%
133
110
243
45%
145
75
220
34%
218
99
317
31%
365
76
442
17%
213
245
2001 2002 2003 2004 2005 2007 2008 2009 2010 2011 2012 2013 2014 20152006
87%
% s
hare
Tho
usan
d M
T
Domestic Sales Imports % Share of Imports
0
50
100
150
200
250
300
350
400
450
500
0
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
2.1.3.4. Assessment of Export Opportunities
Primary interviews indicate that due to high cost of operations, Qatar’s production is not cost competitive and hence, steel fabrication units do not consider exports as an opportunity. Exports are most likely to be limited to rare opportunities where Qatari civil contractors win international projects and plan to source from in-house Qatar-based steel fabrication units or multinational players. For example, Eversendai may source from its Qatar units to meet the demand arising at its steel fabrication units in other countries.
2.1.3.5. Trade Forecast
Imports: The import forecast of structural steel fabrication indicates that about 33% to 38% of the market requirements (in quantity terms) would be met by imports. Primary interviews indicate that imports from Saudi Arabia, the UAE, China and Turkey are about 25% to 40% cheaper than domestic production. Import quantity is expected to reach 149,619MT in 202643.
Chart 12. Qatar’s Structural Steel Fabrication Import Forecast, 2015 to 2026
Domestic Sales Imports % Share of Imports
2015 2016E 2017F 2018F 2019F 2020F 2021F 2022F 2023F 2024F 2025F 2026F
% s
hare
Tho
usan
d M
T
0
100
200
300
400
500
600
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
365
76
442
17% 276
151
427
35%
293
181
474
38%
257
154
411
37%
253
148
401
37%
257
147
403
36%
262
147
409
36%
288
156
444
35%
296
157
453
35%
306
157
463
34%
298
149
447
33%
307
150
457
33%
Source: Team Analysis, ITC Trademap
49Manufacture of Structural Metal Products
Domestic Sales Exports Production % Share of Exports
365
1.7
0.5%
367
276
5.1
281
1.8%
293
5.3
298
1.8%
257
5.5
263
2.1%
253
5.6
259
2.2%
257
5.8
263
2.2%
262
5.9
268
2.2%
288
6.1
294
2.1%
296
6.3
303
2.1%
306
6.5
312
2.1%
298
6.7
304
2.2%
2015 2016E 2017F 2018F 2019F 2020F 2021F 2022F 2023F 2024F 2025F 2026F
307
6.9
314
2.2%
%
Tho
usan
d M
T
0
50
100
150
200
250
300
350
400
0%
2%
4%
6%
8%
10%
12%
14%
16%
18%
20%
Exports: The analysis of recent trade data44 and domestic production estimates indicate that 2.15% of domestic production has been exported from Qatar. The ten-year export forecast of structural steel fabrication indicates that exports may offer less opportunity. Approximately 1.8 to 2.2% of the domestic production (in quantity terms) can be exported45 during 2016 and 2026.
Primary interviews indicate that Qatar’s production is not cost competitive and hence, steel fabrication units do not consider exports an opportunity. Exports are likely to range from 5,053MT in 2016 to 6,911MT in 2026.
Chart 13. Qatar’s Structural Steel Fabrication Export Forecast, 2014 to 2026
Source: Team Analysis, ITC Trademap
Tho
usan
d M
T
Structural Steel Fabrication Market Size (Total Demand, incl. imports) 000s MTSupply (Domesitc installed capacity) 000s MT Demand Supply Gap
2015 2016E 2017F 2018F 2019F 2020F 2021F 2022F 2023F 2024F 2025F 2026F
442
427 47
4
411
401
403
409 44
4
453
463
447
457
585
585
585
585
585
585
585
585
585
585
585
585
(143) (158)(111)
(173) (184) (181) (176)(141) (132) (122) (138) (128)
0
(300)
(200)
(100)
100
200
300
400
500
600
700
2.1.4. Demand–Supply AnalysisConsidering the fact that there are 467 firms46 operating in the market, the installed capacity is 584,814MT per annum, which does not include assumptions for new players having plans to enter the market that have not been announced so far. Comparing with the market size estimates (incl. imports projection), the demand–supply gap points toward an oversupply of 184,043MT in 2019 that is expected to reduce to 128,073MT in 202647.
Chart 14. Qatar’s Structural Steel Fabrication Demand-Supply Analysis, 2014 to 2026
Source: Team Analysis, Primary Interviews, MDPS Annual Bulletin of Industry and Energy Statistics 2015, ITC Trademap
44 ITC Trademap45, 47 Team Analysis46 MDPS
50 Manufacture of Structural Metal Products
2.1.5. Pricing AnalysisThe key factors affecting product pricing are raw material costs and labor costs. These collectively account for an average of 70% of the production costs. Domestic production of raw material in Qatar is extremely limited and hence, steel fabrication units are heavily dependent on imports for sourcing raw material or purchasing it from local traders and distributors. Thereby, raw material prices, which are affected by global macro level trends, drive the selling price of finished goods. The key components of production costs are provided in the adjoining table. Profits and contingency are assumed at additional 10% to 15% and 5% to10%, respectively, to arrive at finished goods pricing.
Steel Fabrication: Selling prices for steel fabrication are quoted on an MT basis and vary as per the design, level of complexity and type of paint (standard paint, cementitious paint, intumescent paint). Currently, the 2016 domestic prices for structural steel fabrication are in the following range:
• Steel fabrication (with standard paint): QAR5,500 to 7,000/MT
• Steel fabrication (with cementitious paint): QAR8,000 to 9,000/MT
• Steel fabrication (with intumescent paint): QAR13,000 to15,000/MT
Trends in selling price are affected by raw material price. The average domestic prices and average import prices for structural steel fabrication in Qatar have been forecast considering the trends in the iron ore prices (2015 to 2026) forecast by the World Bank.
Average domestic prices for structural steel fabrication are expected to range from QAR9,037 per MT in 2016 to QAR12,300 per MT in 2026, implying a CAGR of 3.13%. Average import prices for structural steel fabrication are expected to range from QAR4,796 per MT in 2016 to QAR6,528 per MT in 2026.
Figure 3: Structural Steel Fabrication Cost Component
Source: Primary Interviews
Others
2%Design
2%
Transportation
1%
Construction (erection)
10% to 15%
Fire protection
10% to 15%
Steel
30% to 40%
Labor
30% to 40%
51Manufacture of Structural Metal Products
2.1.6. Regulatory AnalysisQatar Construction Specifications (QCS) 2014: As steel fabrication products are used in the construction sector, their production, installation and usage are mainly regulated as per the following sections of QCS 2014.
a) QCS 2014 Section 16: Structural Steelworks This section has general instructions and regulations related to materials, drawing, fabrication, welding, bolting, accuracy of fabrication, erection, accuracy of erected steel work and protected treatment.
b) QCS 2014 Section 17: Metal Work This section has general instructions and regulations related to material classification, metal doors and windows, architectural metalwork, light metal support, cladding support and workmanship.
In addition to the above, steel fabrication units need to be familiar with other relevant sections of QCS that regulate construction activities having an interface with steel fabrication products. These sections include section 13 (Masonry), section 14 (Roofing), section 4 (Foundation and retaining structures) and section 5 (Concrete).
Chart 15. Qatar’s Structural Steel Fabrication Selling Prices Forecast, 2014 to 2026
QA
R/M
T
Selling Price (Imports)Selling Price (Domestic)
2014
10,388
5,152
2015
10,091
5,355
2016E
9,037
4,796
2017F
8,133
4,316
2018F
8,516
4,519
2019F
8,916
4,732
2020F
9,336
4,954
2021F
9,775
5,187
2022F
10,235
5,431
2023F
10,716
5,687
2024F
11,220
5,954
2025F
11,748
6,234
2026F
12,300
6,528
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
Source: Team Analysis, Primary Interviews
Ministry of Environment: Steel fabrication units need to be approved by the Ministry of Environment.
Civil Defense Department (Ministry of Interior): All building materials products need an approval from the Civil Defense Department (Ministry of Interior) as per Emiri Decree No. 9/2012. Steel fabrication units have to comply with applicable fire safety norms.
ISO Certification: Obtaining ISO certifications (Quality 9001, OHSAS 18001 and Environment 14,001) are vital for tendering purposes.
Apart from the above mentioned conditions, all prospective entrepreneurs need to follow applicable laws on company registration, industrial license, obtaining land and building permissions to set up a steel fabrication facility in Qatar.
52 Manufacture of Structural Metal Products
2.1.7. SWOT Analysis and Michael Porter’s Five Forces Analysis
2.1.7.1. SWOT Analysis
Figure 4: Structural steel Fabrication SWOT Analysis
Summary:
In the medium- to long-term, the strengths and opportunities outweigh the weaknesses and threats due to large market size, upcoming projects pipeline in Qatar and opportunities for civil contractors to backward integrate.
• Upcoming projects from the industrial, infrastructure and commercial sectors.
• Opportunity for the mid- to large-sized civil contractors to backward integrate and serve captive demands.
• Large addressable market of QAR4,107mn in 2015 growing at a CAGR of 1.44%, in value terms, till 2026.
• A wide range of application in different projects, such as industrial, infrastructure, commercial and other real estate.
• Domestic players have been able to successfully substitute imports over last decade.
STRENGTHS OPPORTUNITIES
• Low-priced imports adversely impacting the salability of domestic production.
• Intense rivalry between fabricators threatening new entrants.
• Highly price-sensitive market with small unorganized players and medium players that undercut the large-sized organized players.
• Approximately 33% to 38% of the market would be served by imports that are 25% to 40% cheaper48 as compared to domestic production.
• Dependence on imports for raw materials affecting price competitiveness.
THREATSWEAKNESSESSWOT
Structural Steel Fabrication
53Manufacture of Structural Metal Products
48 Primary Interviews
2.1.7.2. Michael Porter’s Five Forces Analysis
Figure 5: Michael Porter’s Five Forces Model (Structural Steel Fabrication)
High:
• Steel fabrication market is significantly competitive with several players operating in the market. Intense competitive rivalry ensures that price and relationship are key deciding factors in securing a job order.
COMPETITIVE RIVALRY
Medium:
• Structural steel fabrication for SME players is neither capital intensive nor technology intensive.
• Large-sized players focusing on complex projects need technical expertise and large investment.
THREAT OF NEW ENTRY
High:
• Due to a large number of fabricators, the bargaining power of consumers is high.
• Moreover, very little scope for product differentiation on technical grounds further strengthens consumers’ bargaining power.
BARGAINING POWER – CONSUMERS
High:
• Raw material for steel fabrication is not manufactured in Qatar. There are a few raw material manufacturers in the GCC region and several steel fabricators. Raw material manufactures, have high bargaining power.
BARGAINING POWER – SUPPLIERS
Low:
• The boundaries within which concrete can be used are well set, and beyond them, concrete cannot substitute steel and vice versa. Aluminum is unlikely to substitute structural steel due to high cost and difficulty in fabrication.
THREAT OF SUBSTITUTION
54 Manufacture of Structural Metal Products
49, 50, 51 Primary Interviews
2.2. Critical Success FactorsCritical Success Factors include the following:
Figure 6: Critical Success Factors - Structural Steel Fabrication
Access to Raw Material
Raw material forms a major part of the costs incurred by steel fabrication units. Costs related to these are influenced by global trends in the commodity prices. Entrepreneurs are unlikely to have any control on raw material prices. Hence, competitiveness49 in procurement and compliance with good practices in raw material and inventory management, such as economic order quantity and just in time, are essential.
Operational Efficiency
Efficiency in day-to-day operations — fabrication, supervision and other shop floor activities — can help in cost optimization. Compliance with ISO norms for Quality (ISO 9001), OHSAS (ISO 18,001) and Environment (ISO 14001) could lead to standardization50
of procedures, bring in checks and balances, and help achieve compliance with regulatory norms. This can be a key tool in achieving efficiency in operations.
Customer Service
A thorough understanding of clients’ requirements is crucial for companies to gain the trust of their customers. Fabricators need to constantly work along with their clients in order to provide them with seamless solutions and gain a deep understanding of their challenges and requirements.
Access to Markets and Strategic Linkages with Civil Contractors
Entrepreneurs need to develop a strong relationship and strategic linkages with civil contractors as this would help sustain a steady order book.
Technical Know-how
Technical knowledge of fabricators, workforce and sales team are important factors to execute highly complex projects with optimum efficiency51 and minimal errors. Technical know-how enables fabricators to stay ahead of the competition as well as deliver leading services to their customers.
Investment in Machinery
Companies need to invest in modern machinery, experienced welders, designers and project managers. This would enable them to undertake highly complex projects and gain an edge over the competition.
55Manufacture of Structural Metal Products
2.3. Outlook
Going ahead, Qatar market is expected to offer sizable opportunities for new units in the structural steel fabrication market that would continue to remain a major portion (53.1%) of the structural metal products sector. In terms of domestic production value, structural steel fabrication is likely to constitute 56.7% of the overall structural metal products sector.
In the medium- to long-term, large scale industrial developments such as SEZs — promoted by Manateq, metro rail, stadia, industrial projects and upcoming real estate projects — would drive the demand. The market size is estimated to be 427,257MT (QAR3,247mn) in 2016. On the back of strong demand drivers, the market is expected to grow to reach 456,740MT (QAR4,804mn) in 2026.
Large market size means an opportunity52 for new players to tap into 2,948MT worth of average incremental business every year, from 2017 to 2026. This implies that subject to competitive challenges, opportunities exist for two mid-sized players (1,800 MT p.a. capacity running at 80% utilization) to enter the market every year.
High High High
Medium Medium Medium
Access to raw material
Access to markets and strategic linkages
Operational efficiency
Technical know-how
Customer service
Investment in machinery
In terms of challenges, the market is likely to remain significantly competitive and price sensitive. Significant dependence on imports for procurement of raw material and high operational expenses (salaries, rent, etc.) as compared to those in other countries such as the UAE and Saudi Arabia would limit export potential to rare opportunities of up to 2.2% of the domestic production for structural steel fabrication. Imports are likely to remain cheaper as compared to domestic production, and further heighten the challenges.
In the medium- to long-term, the strengths and opportunities outweigh the weaknesses and threats due to large market size, upcoming projects pipeline in Qatar and opportunities for civil contractors to backward integrate.
52 Team Analysis
56 Manufacture of Structural Metal Products
3. Pre-engineered Buildings
3.1. Overview of PEBsPEB is a metal shell utilizing three distinct product categories, namely (1) built-up ‘I’ shaped primary structural steel framing members (columns and rafters); (2) cold-formed ‘Z’- and ‘C’-shaped secondary structural steel members (roof purlins, eave struts and wall girts); and, (3) corrugated sheets made of steel (roof and wall panels).
3.1.1. Components of PEBs
Figure 7: Key Components of PEBs
Primary Structure (columns and rafters)
• Primary structure is the most important part of PEBs. It bears the major load of the building
• Assembled columns and rafters make the frame of the building. All other parts of the building are fixed on it
• This structure is designed using advanced software, such as STAAD PRO and Tekla.
Secondary Structures (‘C’ and ‘Z’ purlin frames, girts and eave struts)
• Purlin, girts, eave struts, etc., are secondary members of structural framing
• Purlins act as struts that help in resisting wind and earthquake loads, and increase the frame capacity by providing lateral bracing to the main frame.
Decking Sheets (‘G’ panel)
• Decking sheets are used for flooring. For intermediate floors, a metal decking sheet is fixed to purlins and concrete is poured over it
• Deep-ribbed type ‘G’ panel is used as deck paneling for mezzanines and floor systems
• They are available in 0.7mm pre-galvanized coating on steel.
57Manufacture of Structural Metal Products
3.1.2. Applications of PEBs
Figure 8: Applications of PEBs
Factories, Industrial Buildings and Warehouses
• PEB factories, industrial buildings and warehouses consist of primary and secondary steel frames
• PEBs enable quicker and economical creation of industrial buildings, factory sheds and warehousing infrastructure
• They are ideal for factory sheds, buildings and warehouses where the intermediate columns are avoided to enable free movement of goods and machinery
• PEBs are fabricated to an end user’s requirement in a factory and erected at site, which saves time.
Others (aircraft hangars, indoor stadiums, platform shelters, etc.)
• Aircraft hangars with integrated hangar and hangar door are beneficial since the building header is structurally designed to carry the door system, roof system and their respective reactions and loadings
• PEBs are ideal for buildings that need to be relocated to other places.
Commercial Buildings (showroom, exhibition hall) and Shopping Malls
• PEBs are ideal for showrooms, airports, exhibition halls, etc., due to their esthetic flexibility
• They are ideal for buildings in city area where land cost is too high, since they use lesser footprint area than RCC buildings
• Shopping malls tend to undergo expansion over a period of time; PEBs enable expansion based on the current structure.
58 Manufacture of Structural Metal Products
3.1.3. Benefits of PEBs vs Conventional Steel Buildings
Figure 9: Benefits of PEBs53 vs Conventional Steel Buildings
PEBs Conventional Steel Buildings
Structure
• PEB structures utilize steel efficiently with different types of columns and rafters
• Weight is reduced by 30% through the efficient use of steel
• Secondary structures are made with lightweight roll-forming ‘Z’- or ‘C’-shaped purlins
• Primary steel structures have constant cross sections, regardless of the varying magnitude of local stresses along the member length
• Weight is high due to a high safety factor and the usage of heavier steel sections
• Secondary structures are made with standard hot-rolled sections, which are relatively more heavier
Design
• Design is esthetically appealing
• Specialized computer analysis design programs optimize the materials required
• Drafting is computerized using standard details to minimize the use of project custom details
• Special esthetic designs for steel buildings have to be specially modeled
• It is designed from the scratch, and requires substantial engineering and detailing work by the consultant with fewer design aids
Delivery
• Average delivery time is 6 to 8 weeks
• Erection process is faster and much easier with very less requirement for equipment
• Average delivery time is 22 to 28 weeks
• Erection process is slow; it requires extensive use of field labor and heavy equipment
Foundation
• It has a simple design, is easy to construct and is lightweight due to lower deadweight of the super structure
• It requires extensive, heavy foundation on account of higher deadweight of the super structure (i.e., heavy beams)
Price
• The initial cost of PEB steel buildings is lower (cost per sqm is about 30% less than the conventional structures) and delivery is faster
• Special design and features need to be developed for each project at higher costs
Performance
• All components are specified and designed specially to act together as a system for maximum efficiency, precise fit and peak performance in the field
• Components are custom designed for a specific application on a specific job. Design and detailing errors are possible while assembling the diverse components into unique buildings
53 PEBSteel
59Manufacture of Structural Metal Products
3.2. Qatar PEB Market Analysis
3.2.1. Demand-Side Analysis
3.2.1.1. Historical and Current Market Size
Qatar’s market size for PEBs in terms of volume was estimated at 33,732MT and was valued at QAR201.8mn in 201554. The PEB market registered a steady growth in terms of volume since 2009, driven by the demand for manufacturing facilities and warehouses from the industrial and commercial segments. However, volatility in steel prices led to fluctuations in the market values between 2007 and 2015.
Between 2010 and 2015, the market grew at a Compound Annual Growth Rate (CAGR) of 17.2% in terms of volume and 19.9% in terms of value driven by the increased demand for PEBs from construction projects such as factory sheds for QDB’s Jahez scheme, warehouses, airport expansion project, hangers, etc.
Chart 16. Qatar’s PEB Demand, 2001 to 2015
54 Team Analysis
QA
R m
n
Thou
sand
MT
Pre-Engineered Buildings (Volume, 000's MT) Pre-Engineered Buildings (Value, QAR mn)
0
5
10
15
20
25
30
35
40
0
25
50
75
100
125
150
175
200
225
250
2
5.8 7.7 8.7
4
17.7
5
29.4
7
36.5
11
97.4
12
83.6
13
74.8
15
81.3
20
96.7
23
154.0
28
216.6
34
223.3
2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015
34
201.8
Source: Team Analysis, ITC Trademap, Primary Interviews
3.2.1.2. Market Size Segmentation by Products
Primary structures are the main load-bearing structures of PEBs that account for 60% share of the market. The key application areas of primary structures range from industrial, commercial, recreational and institutional segments. Secondary structures that consist of purlin, girts, eave struts, etc., account for 35% share of the market, followed by decking sheets that account for the balance 5% share.
Chart 17. PEB Market Segmentation, 2015
5% Decking Sheets
35% Secondary Structure (CNZ Purlin Frames)
60%Primary Structure
(Main Frame)
Qatar PEBMarket Size 33,372 MT
Source: Team Analysis, Primary Interviews
60 Manufacture of Structural Metal Products
3.2.1.4. Demand Forecast
The demand for PEBs in Qatar is forecast to reach 42,485MT in volume terms and QAR317.8mn in value terms in 202655. The PEB market size in volume is expected to witness an 8% decline in 2016 due to volatility in crude oil prices that resulted in stalling of certain industrial and infrastructure projects as the government tries to cut down expenses until crude oil prices stabilize. With the anticipated recovery in crude oil prices post 2016, the market is forecast to grow at a CAGR of 3.2% from 31,009MT in 2016 to reach 42,485MT until 2026.
Chart 18. Qatar’s PEB Demand Forecast, 2014 to 2026
Source: Team Analysis, ITC Trademap, Primary Interviews
2015 2016E 2017F 2018F 2019F 2020F 2022F 2023F 2024F 2025F 2026F2021F
QA
R m
n
Tho
usan
d M
T
0
10
20
30
40
50
60
0
50
100
150
200
250
300
350
Pre-Engineered Buildings (Volume, 000's MT) Pre-Engineered Buildings (Value, QAR mn)
33.7
201.8
31.0
170.3
32.3
159.9
33.5
173.4
34.6
187.5
35.5
201.3
37.4
232.8
38.6
251.7
39.9
272.1
41.2
294.1
42.5
317.8
215.3
36.2
3.2.1.3. Demand Drivers
One of the major demand drivers for the PEB industry is the government’s increased focus on economy diversification, by promoting the manufacturing sector and SMEs, which would result in increased construction of factory sheds, industrial buildings, etc., in Qatar. Moreover, Manateq’s special economic zones (SEZs) would provide a boost to set up factory sheds and industrial buildings, thus driving the demand for PEBs.
In addition, the increasing demand for modern warehousing is among the top demand drivers for PEB structures. The demand is expected to be driven by the logistics and retail sectors, which require large PEB structures such as warehouses and retail space. Further, demand from power plant structures, factory buildings, commercial buildings (offices and retail malls) and metro stations, etc., would increase the demand for PEBs.
Government’s Increased Focus on Economy DiversificationQatar’s Government has a strong focus on developing the manufacturing sector, the downstream sector, as part of its goal of diversifying the economy that would enhance the private sector’s contribution to GDP and would drive the demand for PEBs in the country.
Manateq’s SEZsManateq is promoting three SEZs in Qatar. These are expected to give a boost to the manufacturing and industrial sectors. New industrial developments are expected to drive the demand for PEBs. Details related to the upcoming SEZs are as follows:
SEZ 1: Ras Bufontas; Location: adjacent to Hamad International Airport. Sectors: Healthcare and medical devices; aerospace and automotive; advanced technology; logistics; and business services.
SEZ 2: Um Alhoul; Location: adjacent to Hamad Port, next to the Mesaieed Industrial City.
Sectors: Marine industries; logistics; electrical and machinery; food and beverages; building materials, metals and materials; and, downstream petrochemicals.
SEZ 3: Al Karaana (which is Manateq’s largest project and is expected to be launched in 2018). It is strategically located a halfway between Doha and Abu Sumra on the border of Saudi Arabia. Al Karaana would become the overland gateway to GCC markets.
55 Team Analysis
61Manufacture of Structural Metal Products
3.2.2. Supply-Side Analysis
3.2.2.1. Market Structure
There are several players in Qatar that are engaged in the manufacturing of PEBs; however, there is only one player (BSI Steel based in Qatar with about 250 employees) that has a manufacturing facility dedicated entirely for PEBs. BSI Steel has a total production capacity of 20,000MT per annum and currently its utilization rate is at 60%. On account of growing demand for PEBs in Qatar, BSI’s capacity utilization increased steadily from 35% in 2010 to 60% in 2015.
The other manufacturers include domestic steel fabrication firms that manufacture PEBs as part of their overall product portfolio. International players operating in Qatar serve the market mainly through imports from Kuwait, Turkey, the UAE, Saudi Arabia, China and India.
BSI Steel is the market leader with 35% share of the market followed by Kirby Building Systems with 19% share that serves the market through imports. Domestic steel fabricators, such as Al Wadi Steel and KBC Engineering, also manufacture PEBs as part of their product portfolio and account for 27% share of the market. Other players in the market, such as Zamil Steel and Mabani Steel, serve through imports from their manufacturing facilities in Saudi Arabia and the UAE.
Chart 19. Qatar’s PEB Production Capacity and Utilization
Tho
usan
d M
T
Capacity (MT) Utilization (%)
35
2010
35
2011
35
2012
35
2013
35
2014
35
35%
45%
55%
65%
80%
60%
2015
0
5
10
15
20
25
30
35
40
45
50
0
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Source: Team Analysis, Primary Interviews
Chart 20. Qatar’s PEB Market Share of Key Players, 2015
8% Other Imports
6% Zamil Steel
6% Mabani
27% Other Domestic
35%BSI Steel
19%Kirby Building
Systems
Qatar PEB Market Size 33,372 MT
Source: Team Analysis, Primary Interviews
62 Manufacture of Structural Metal Products
3.2.2.3. Business Model Analysis
The manufacturing of PEB requires access to raw materials, such as steel plates, which are then fabricated according to the standard specifications. Design and detailing software (e.g., MBS Software) is used that incorporates building codes, applicable to the design and manufacturing of PEBs.
BSI Steel is the only organized player with a dedicated PEB manufacturing facility in Qatar. Prior to this, the market was mainly dependent on imports from neighboring GCC countries, such as the UAE, Saudi Arabia and Kuwait, which have the manufacturing base of leading PEB manufacturers.
3.2.2.2. Profiling of Key Domestic Players
BSI Steel: Established in 2006, it is the only organized player with a dedicated PEB manufacturing facility in Qatar. Its head office and plant are located in the New Industrial Area in Doha. Its facilities include a canteen, clinic, office space and an area of 9,000sqm plant facility, totaling up to 10,000sqm. BSI Steel is ISO 9001:2008 certified. It sells directly to customers (contractors). Key clients include companies from the construction, warehousing and oil and gas sectors.
Table 12. PEB: Key Domestic Players
Key PlayersYear of
EstablishmentProduct Portfolio
Installed capacity (MTPA)56
BSI Steel 2006 • PEBs 20,000
Al Wadi Contracting
1971
• PEBs• Structural
steel works• Pre-fabricated
buildings
12,000
Steel Engineering Technology
2013
• PEBs• Structural
steel works• Pre-fabricated
buildings
6,000
KBC Engineering
1987
• PEBs• Structural
steel works• Aluminum
fabrication
-
Al Maher Contracting
2012• PEBs• Pre-fabricated
buildings-
Big Engineering Works
1996
• PEBs• Structural
steel works• Pre-fabricated
buildings
-
Apart from BSI Steel, most of the players, such as Kirby Building Systems, Zamil Steel, Mabani Steel and Mammut Building Systems, are serving the market through imports. They mainly benefit from being industry leaders in the GCC market and also have access to raw materials at a lower price in the UAE and Saudi Arabia as compared to Qatar where the majority of the steel plates and sections are imported into the country. Being a local supplier, BSI Steel currently benefits from local expertise and access to major projects in Qatar. Its large-scale manufacturing facility, experience in the domestic market and quick turnaround time make it a preferred supplier for various industrial and commercial projects in Qatar. Construction companies are in full swing in order to complete their projects before the deadlines for the FIFA 2022, metro rail and SEZ, which make PEBs a preferred choice of structures for warehousing and factories for its quick construction ability.
Thus, having strategic linkages with construction companies, which can ensure a steady flow of contracts, as well as having well-equipped manufacturing facilities is a key requirement for any new entrepreneur intending to set up a PEB manufacturing unit.
3.2.2.4. Domestic Production Competitiveness
Access to inexpensive raw material and to large market underlines the profitability and feasibility of any industrial venture. Key factors that influence the competitiveness of domestic production of PEBs include raw material, labor, market size and impact of competition.
Raw Material: Qatar does not domestically produce raw materials, such as steel plates. The raw material production capacity is underdeveloped, limited to small sections (less than 80mm). Hence, PEB manufacturers in Qatar depend on imports to meet their raw material needs.
Our primary research indicates that the raw material is procured from China, India, Saudi Arabia, Turkey and the UAE. Expensive raw material significantly impacts the cost of domestically produced finished goods.
High Operational Expenses: Our primary interviews indicate that the operational costs are significantly higher in Qatar due to higher labor costs and rent as compared with the nations exporting to Qatar — Kuwait, the UAE, Saudi Arabia, India, China, Turkey, etc. This adversely affects the price competitiveness of the domestic production.
Time to Market: According to industry players, procuring raw material is time consuming, which leaves them with very little time to fabricate and deliver finished products to customers. Raw material inventory requirement increases since manufacturers either have to procure raw materials in advance that add to the inventory costs or they would have to purchase raw materials at current market rates, which may be higher than the quotations submitted for job works, adversely affecting their price competitiveness.
Number of Players: Due to the fragmented nature and the large number of players catering to the market though local production as well as imports, the PEB market in Qatar is characterized by fierce competition and price sensitivity. 56 Company Websites
63Manufacture of Structural Metal Products
3.2.3. Trade Analysis
3.2.3.1. Historical Trade Analysis
In 2015, Qatar’s import of PEBs amounted to 12,772MT and was valued at QAR73.4mn57. The imports grew 101% in terms of volume and 91% in terms of value over the previous year, driven by construction of new warehouses and factory sheds in Qatar. The import volumes grew at a CAGR of 33.6% between 2010 and 2015.
Exports: In 2015, Qatar’s PEB exports amounted to 40.4MT and was valued at QAR2.9mn58. While the exports grew 63% in terms of volume over the previous year, its growth by volumes increased at a CAGR of 58.8% between 2010 and 2015. The trend in exports depends on domestic manufacturers securing projects outside Qatar. In 2012, BSI Steel secured a project to supply PEBs to the UAE and Saudi Arabia, and as a result, export volumes peaked at 280MT.
Chart 21. Qatar’s PEB Imports, 2001 to 2015
12,772
73.4
2015
3,1204,442
3,502 3,6082,671 2,996 3,820 4,071
5,754 6,341
QA
R m
n
MT
PEB Imports (Volume, MT) PEB Imports (Value, QAR mn)
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
0
10
20
30
40
50
60
70
80
1.3
2001
1.9
2002
2.1
2003
1,839
8.4
2004
16.7
2005
22.4
2006
30.7
2007
23.0
2008
14.2
2009
14.9
2010
17.6
2011
25.1
2012
40.9
2013
38.5
2014
Source: ITC Trademap, Team Analysis
Chart 22. Qatar’s PEB Exports, 2001 to 2015Q
AR
mn
MT
PEB Exports (MT) PEB Exports (QAR mn)
2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015
0
50
100
150
200
250
300
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
0.1
280
110.3
25
0.2
40
2.9
Source: ITC Trademap, Team Analysis57 ITC Trademap 58 ITC Trademap Database
64 Manufacture of Structural Metal Products
3.2.3.2. Trade by Source and Destination
Imports: The analysis of import data from 2005 to 2015 indicates that Kuwait, the UAE, Saudi Arabia, Turkey, Italy and Jordan are the key sources of imports59. The top-five sources of Qatar’s PEB imports between 2010 and 2015 have been listed in the chart below. Kuwait accounts for the largest with 67% share of PEB imports.
Chart 23. Key Sources of PEB’s Imports, 2010 to 2015
Rest of the World
Kuwait
Turkey
UAE
IndiaChina
2010 2011 2012 2013 2014 2015
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Source: ITC Trademap, Team Analysis
The area graph shown above indicates that the share of top five countries consistently remained above 90% during 2010 to 2015. Kuwait has been the leading exporter to Qatar but its share came down from 80.3% in 2012 to 58% in 2015. In the recent past, countries such as the UAE, Turkey, China and India have increased their exports to Qatar.
Exports: The analysis of export data60 from 2010 to 2015 indicates that Belgium, UAE, Canada, Kuwait and Oman are the key destinations of Qatar’s PEB exports.
Chart 24. Key Destinations of PEB’s Exports, 2010 to 2015
Source: ITC Trademap, Team Analysis
The small quantity of PEB exports has been to nearby countries, such as the UAE, Oman and Kuwait. Qatar did not export PEB products in 2011, and exports to Belgium and Canada are likely to have been on account of the return of imported goods.
Belgium
UAE
Canada
Kuwait
Oman
Rest of the World
2010 2011 2012 2013 2014 2015
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
59, 60 ITC Trademap
65Manufacture of Structural Metal Products
3.2.3.3. Share of Imports in Domestic Consumption
Between 2001 and 2003, the domestic demand was in a relatively stable phase where imports ranged between 23% to 26% of the market. With the announcement of the 2006 Asian Games in Qatar, construction activities picked up rapidly in 2004. Imports of PEBs increased almost two-folds since domestic manufacturers were unable to cater to the sudden spike in the demand61. The rapid market growth and the widening demand–supply gap between 2004 and 2006 supported the establishment of new domestic units in Qatar. BSI Steel commenced manufacturing PEBs in 2007, as a result, the share of imports servicing the market fell from the peak of 63% in 2006 to 29% in 2008 and thereon stabilized in the range of 18% to 20% during 2009 and 2014. About 38% of the market was served by imports in 2015.
Chart 25. Qatar’s PEB Imports Vs Domestic Sales, 2001 to 2015
1.5
23%
2001
1.8
26%
2002
2.2
26%
2003
1.91.8
3.7
50%
2004
2.23.1
5.3
59%
2005
2.6
4.4
7.0
63%
2006
7.0
3.510.5
33% 29%
2007
8.8
3.6
12.4
2008
10.5
2.7
13.2
20%
2009
12.2
3.0
15.2
20%
2010
15.8
3.8
19.6
20%
2011
19.0
4.1
23.0
18%
2012
22.7
5.8
28.5
20%
2013
28.0
6.3
34.3
18%
2014
21.0
12.8
33.7
38%
2015
% S
hare
Tho
usan
d M
T
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Domestic Sales Imports Total % Share of Imports
0
5
10
15
20
25
30
35
40
Source: Team Analysis, ITC Trademap
3.2.3.4. Assessment of Export Opportunities
Primary interviews indicate that Qatar’s production is not cost competitive as compared to other manufacturers based in GCC countries and hence, PEB manufacturers do not consider exports a significant opportunity as compared to the opportunities in the domestic market. Exports are most likely to be limited to rare opportunities where Qatari PEB manufacturers win international projects and their PEB pricing is found to be competitive with local players in export market.
61 Team Analysis
66 Manufacture of Structural Metal Products
Domestic Sales Imports Total % Share of Imports
21.0
12.8
34
38%
2015
23.8
7.2
31
23%
2016E
24.9
7.5
32
23%
2017F
25.8
7.7
33
23%
2018F
26.6
7.9
35
23%
2019F 2020F
27.4
8.1
35
23%
2021F
28.0
8.3
36
23%
2022F
28.9
8.5
37
23%
2023F
29.9
8.8
39
23%
2024F
30.9
9.0
40
23%
32.9
9.6
42
22%
2026F
% S
hare
Tho
usan
d M
T
0
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
0
5
10
15
20
25
30
35
40
45
3.2.3.5. Trade Forecast
Imports: The import forecast for PEBs indicates that about 23% of the market (in quantity terms) would be serviced by imports. Although PEBs imported from Kuwait, the UAE and Saudi Arabia are about 15% cheaper than domestic production, primary interviews indicate that imports are expected to decline on account of local manufacturers serving the domestic demand. Imports are likely to decline from 12,772MT in 2015 to 9,555MT in 2026.
Chart 26. Qatar’s PEB Imports Forecast, 2015 to 2026
Source: Team Analysis, ITC Trademap
Exports: The export forecast for PEBs indicates that exports would offer a minor opportunity. As per the forecast, less than 1% of the domestic production (in quantity terms) is estimated to be exported. Primary interviews indicate that Qatar’s production is not cost competitive and hence, PEB units do not consider exports an opportunity.
The exports are likely to range from 40.4MT in 2015 to 76.2MT in 202662.
Chart 27. Qatar’s PEB Exports Forecast, 2014 to 2026
Source: Team Analysis, ITC Trademap
21
0.04
0.2%
2015e
24
0.06
0.2%
2016F 2017F
26
0.06
0.2%
2018F
27
0.06
0.2%
2019F
27
0.06
0.2%
2020F
28
0.06
0.2%
2021F
29
0.07
0.2%
2022F
30
0.07
0.2%
2023F
31
0.07
0.2%
2024F
32
0.07
0.2%
2025F
33
0.08
0.2%
2026F
25
0.0621.023.9
25.8 26.7 27.4 28.0 29.0 29.9 30.9 32.0 33.0
24.9
0.2%
%
Th
ou
san
d M
T
Domestic Sales Exports Production % Share of Exports
0
5
10
15
20
25
30
35
0%
2%
4%
6%
8%
10%
12%
14%
16%
18%
20%
62 Team Analysis
67Manufacture of Structural Metal Products
3.2.4. Demand–Supply AnalysisThe total domestic capacity for PEBs in Qatar is estimated at 35,000MT per annum. Primary interviews suggest that due to sufficient domestic demand, Seashore Steel is also planning to set up a PEB manufacturing unit with a capacity of 30,000TPA, which is expected to commence production in 2017. Thus, Qatar’s PEB manufacturing capacity is forecast to reach 78,000MT in 202663.
Chart 28. Qatar’s PEB Demand-Supply Analysis, 2015 to 2026
PEB Market Size (Total Demand, incl. imports) 000s MT Supply (Domesitc installed capacity)000s MT Demand Supply Gap
Tho
usan
d M
T
34 31 32 33 35 35 36 37 39 40 41 42
35 35
65 65 65 65 65 65 65 65 65 65
(1) (4)
(33) (32) (30) (30) (29) (28) (26) (25) (24) (23)
2015 2016e 2017F 2018F 2019F 2020F 2021F 2022F 2023F 2024F 2025F 2026F
(40)
(20)
0
20
40
60
80
Source: Team Analysis, Primary Interviews, MDPS Annual Bulletin of Industry and Energy Statistics 2015, ITC Trademap
Comparing with domestic sales projection, PEB demand (net of imports) is forecast to reach 42,485MT in 2026, thus leaving a demand–supply gap of 22,515MT.
3.2.5. Pricing AnalysisThe key factors affecting product pricing are raw material costs and fabrication costs. These collectively account for 70% to 80% of the production costs64. Raw materials, such as steel sections and plates, are not produced in Qatar and have to be imported by domestic PEB manufacturers, as a result raw material prices are on the higher side for local producers since they rely entirely on imports. Steel prices are affected by global macro level trends, thus affecting the selling price of finished goods (PEBs). The key components of production costs are provided in the table below. Profits and contingency are assumed at an additional 10% to 15% and 5% to 10% over cost components, respectively, to arrive at pricing of PEBs.
Price Forecast
Trends in the selling price of PEBs are affected by global prices of steel. The average domestic prices and average import prices for PEBs in Qatar have been forecast considering the trends in the iron ore prices (2015 to 2026) forecast by the World Bank65.
Raw material30% to 40%Installation
20%
40%Fabrication
Cost components
63 Team Analysis64 Primary Interviews65 Team Analysis
Figure 10: Cost Components of PEBs
68 Manufacture of Structural Metal Products
The average domestic prices for PEBs are expected to range from QAR5,597 in 2016 to QAR7,618 in 2026, implying a CAGR of 3.1%, while the average import prices are expected to range from QAR5,147 in 2016 to QAR7,006 in 2026, implying a CAGR of about 2.7%.
Chart 29. Qatar’s PEB Selling Prices Forecast, 2014 to 2026
Source: Team Analysis, Primary Interviews, World Bank
3.2.6. Regulatory Analysis
QCS 2014: As PEBs are used in the construction sector, their production, installation and usage are mainly regulated as per the following sections of Qatar Construction Specifications (QCS) 2014:66
a) QCS 2014 Section 16: Structural steelworks This section has general instructions and regulations related to materials, drawing, fabrication, welding, bolting, accuracy of fabrication, erection, accuracy of erected steel work and protected treatment.
b) QCS 2014 Section 17: Metal work This section has general instructions and regulations related to material classification, metal doors and windows, architectural metalwork, light metal support, cladding support and workmanship.
In addition to the above, steel fabrication units need to be familiar with other relevant sections of QCS that regulate construction activities that have an interface with PEBs. These sections include section 13 (masonry), section 14 (roofing), section 4 (foundation and retaining structures) and section 5 (concrete).
The Ministry of Environment: PEB manufacturing units need to be approved by the Ministry of Environment.
Civil Defense Department (Ministry of Interior): All building material products need an approval from the Civil Defense Department (Ministry of Interior) as per Emiri Decree No. 9/2012. PEB manufacturing units have to comply with the applicable fire safety norms.
ISO Certification: Obtaining ISO certifications (Quality 9001, OHSAS 18001 and Environment 14,001) are vital for the tendering purposes.
Welder Certification: All the welders working in a PEB manufacturing facility have to be certified by a recognized certification agency, such as the American Welding Society or by a testing, inspection and certification agency, such as Bureau Veritas.
Apart from the above, all prospective entrepreneurs need to follow applicable laws related to company registration, industrial license, and obtaining land and building permissions for setting up a PEB manufacturing facility in Qatar.
QA
R/M
T
Selling Price (Imports)Selling Price (Domestic)
2014
6,606
6,075
2015
6,250
5,748
2016e
5,597
5,147
2017F
5,037
4,632
2018F
5,274
4,850
2019F
5,522
5,078
2020F
5,782
5,317
2021F
6,054
5,567
2022F
6,339
5,829
2023F
6,637
6,103
2024F
6,949
6,391
2025F
7,276
6,691
2026F
7,618
7,006
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
9,000
10,000
66 Qatar Construction Specifications (QCS) 2014
69Manufacture of Structural Metal Products
3.2.7. SWOT Analysis and Michael Porter’s Five-Force Analysis
3.2.7.1. SWOT Analysis
Figure 11: PEB SWOT Analysis
Summary:
PEB saves time and is cost effective since it is mainly formed of standard sections and connections, and consumes less raw materials apart from the fact that it is easy to install. Apart from its strengths, its weaknesses include difficulty in exporting domestic production and in achieving product differentiation on parameters other than price. New industrial projects and manufacturing facilities are the opportunity areas, while competitive rivalry and price-sensitive market are the threats.
OPPORTUNITIESSTRENGTHS
THREATSWEAKNESSES
Pre-engineered Buildings
• Upcoming industrial, warehousing, rail projects and setting up of manufacturing facilities in the next 10 years (2016 to 2026)
• Widespread use in application across warehousing, factories, industrial and commercial sheds
• Quick and efficient; since PEBs are mainly formed of standard sections and connections, design time is significantly reduced; basic designs are used over a long period of time
• Simple design, easy to construct and light weight; it uses 30% less steel, hence is a quicker and cheaper alternative than conventional steel structures
• Domestic players have been able to reduce the country’s dependence on imports by substituting them with domestically manufactured PEBs
• Low-priced imports adversely impacting the salability of domestic production
• Intense rivalry between fabricators threatening new entrants
• Highly price-sensitive market, with small unorganized players and importers, undercutting the large-sized organized players
• Dependence on imports for raw materials affecting price competitiveness
• Standard building and design codes are used to create PEB structures leaving less room for product differentiation
• Domestic manufacturers are unable to export due to the presence of well-established players in GCC countries, such as Kuwait, UAE and Saudi Arabia, that benefit from cheaper (8% to 15%) raw material prices
SWOT
70 Manufacture of Structural Metal Products
3.2.7.2. Michael Porter’s Five Forces model analysis
Figure 12: Michael Porter’s Five Forces Model (Pre-engineered Building)
High:
• Competitive rivalry is high due to the presence of several players operating in the market.
• Intense competitive rivalry ensures that price and relationship are key deciding factors in securing a job order.
COMPETITIVE RIVALRY
High:
• PEB manufacturing is neither capital intensive nor technology intensive.
• Hence, the threat of entry is low.
THREAT OF NEW ENTRY
High:
• Large number of PEB suppliers operating in the region.
• Very little scope for product differentiation on technical grounds further strengthens the bargaining power of consumers.
BARGAINING POWER – CONSUMERS
High:
• Raw material for PEB manufacturing (e.g., steel plates and secondary sections) is not manufactured in Qatar, hence manufacturers have to rely on imports.
• Suppliers have high bargaining power.
BARGAINING POWER – SUPPLIERS
Low:
• Steel PEBs offer optimum strength at lower costs in comparison to hot-rolled steel sections.
• Other metals (i.e., aluminum) are unlikely to substitute steel PEBs due to high cost.
THREAT OF SUBSTITUTION
71Manufacture of Structural Metal Products
3.3. Critical Success FactorsCritical Success Factors include the following:
Figure 13: Critical Success Factors - Pre-engineered Building
Access to Raw Material
Raw material such as steel plates and sections form a major part of the costs incurred by steel PEB manufacturing units. Costs related to these are influenced by global trends in the steel prices. Entrepreneurs are unlikely to have any control on raw material prices. Hence, competitiveness in procurement and compliance with good practices in raw material and inventory management, such as economic order quantity and just in time, are essential. Entrepreneurs need to source steel plates and sections from suppliers at competitive prices in order to stay ahead of other market players, especially importers.
Operational Efficiency
Efficiency in day-to-day operations, such as fabrication, supervision, and other shop floor activities, can help in cost optimization. Compliance with ISO norms for Quality (ISO 9001), OHSAS (ISO 18,001) and Environment (ISO 14001) would lead to standardization of procedures, bring in checks and balances into the operations, and help achieve compliance with regulatory norms. This can be a key tool in achieving efficiency in operations.
Customer Service
Thorough understanding of the clients’ requirements is crucial for companies to gain the trust of its customers. PEB firms need to constantly work along with their clients to provide them with seamless solutions and gain a deep understanding of their challenges and requirements.
Access to Markets and Strategic Linkages with Civil Contractors
Entrepreneurs could develop a strong relationship and strategic linkages with civil contractors as this would help sustain a steady order book.
Technical Know-how
Technical knowledge of fabricators, workforce and sales team, use of latest PEB software for design, detailing, costing and drafting of PEBs are important to execute significantly complex projects with optimum efficiency and minimal errors. It would enable PEB firms to stay ahead of the competition as well as deliver world-class services to its customers.
Investment in Machinery
PEB firms could invest in modern machinery, experienced welders, designers and project managers. This would enable them to undertake significantly complex projects and gain an edge over the competition.
72 Manufacture of Structural Metal Products
3.4. Outlook
Qatar’s PEB market has witnessed a steady growth wherein the demand has grown from 5,312MT (QAR29.4mn) in 2005 to 33,732MT (QAR201.8mn) in 2015 indicating a growth of 20.3% in volume and 21.2% in value terms. Establishment of a domestic manufacturing facility in 2006 substantially reduced Qatar’s dependence on PEB imports from 63% in 2006 to about 38% share of the total market in 2015. This indicates that import substitution was successfully achieved and hence, there is opportunity for new domestic players to enter the market.
In the medium to long-term, large-scale developments, such as the Qatar rail and metro, New Doha Port Development, SEZs promoted by Manateq, FIFA 2022 stadia, industrial projects and upcoming real estate projects, would drive the demand for PEBs. On the back of strong demand drivers, the market is expected to grow at a CAGR of 5.4% from QAR201.8mn in 2015 to an estimated QAR317.8mn in 2026.
Pertaining to the challenges, the market is likely to remain competitive and price sensitive. Dependence on imports for procurement of raw material and high operational expenses (salaries, rents, etc.) as compared with other countries, such as the UAE and Saudi Arabia, would limit export potential to rare opportunities, i.e., less than 1% of domestic production. Imports are likely to remain cheaper than domestic production and further heighten the challenges.
High High High
Medium Medium Medium
Access to raw material
Access to markets and strategic linkages
Operational efficiency
Technical know-how
Customer service
Investment in machinery
Given the market size and the growth potential of this segment, driven primarily by factory, warehousing and industrial projects, subject to competitive challenges, new entrepreneurs can benefit from average incremental opportunities worth QAR15mn (1,148MT) per annum from 2017 to 2026. However, as the average incremental business per annum until 2026 is low for offering viable opportunities, entrepreneurs would have to target related segments, such as structural steel fabrication and architectural steel fabrication, and focus on being cost competitive to be able to substitute imports and gain market share from existing players.
73Manufacture of Structural Metal Products
74 Manufacture of Structural Metal Products
4. Pre-fabricated Buildings
4.1. Qatar Market OverviewPre-fabricated buildings offer several advantages as they are easy to construct, install and disassemble. Pre-fabricated buildings are economic and have a long lifespan of 15 to 20 years. They have a wide range of applications in labor accommodations, private units (site offices, mosques, majlis, villa extensions and security cabins) and greenhouses.
Qatar’s pre-fabricated buildings market was valued at QAR806mn in 201567, constituting 10.4% of the overall structural metals sector. Pre-fabricated buildings for labor accommodation forms the largest segment, with a market share of 58.6%, followed by private units with 39.8% share and greenhouses accounting for 1.6% share.
Qatar has 20 manufacturing units in this segment, of which a few large players have 83.2% share in the sales by domestic players followed by medium-sized players and small players that command 11.8% and 5% share, respectively. Pre-fabricated labor accommodations and pre-fabricated private units have minor export opportunities but pre-fabricated greenhouses are not exportable. The following sections of the report provide a detailed market analysis on each of these products.
Chart 30. Pre-fabricated Buildings Market Segmentation, 2015
1.6% P-FAB Greenhouses
39.8% P-FAB Pvt. Units
58.6%P-FAB labour camps
P-FAB labour camps P-FAB Pvt. Units P-FAB Greenhouses
Pre-fabricated buildings market
QAR806mn
Source: Team Analysis, ITC Trademap, MDPS Annual Bulletin of Building Permits and Competed Building Statistics
67 Team Analysis
75Manufacture of Structural Metal Products
Pre-fabricated Labor Accommodation
Mosque
Pre-fabricated greenhouses
Security cabin
Pre-fabricated Private Units
Site office
76 Manufacture of Structural Metal Products
4.1.1. Pre-fabricated Labor Accommodations
4.1.1.1. Demand-Side Analysis
Demand for pre-fabricated labor accommodations is driven by large-scale real estate construction and infrastructure development projects in Qatar. Construction of new roads, buildings, hotels and stadiums in view of the FIFA 2022 World Cup and the Qatar National Vision 2030 are the dominant activities in the construction sector. This has given rise to a tremendous influx of laborers into Qatar, to complete these projects within the scheduled timelines. Due to the low cost and ease of construction, pre-fabricated labor accommodations can be installed and occupied within a shorter span of time than conventional buildings, thus making them a preferred option for accommodating the large labor workforce.
4.1.1.1.1. Historical and Current Market Size
Between 2001 and 2007, the demand for pre-fabricated labor accommodation grew from QAR44.4mn (82,416sqm) in 2001 to QAR172.5mn (196,215sqm) in 2007, growing at a CAGR of 25.4% in terms of value and 15.6% in terms of volume. Market growth was driven by new industrial developments and demand from construction projects related to the Asian Games 2006. The market peaked in 2008 to reach QAR327.6mn (380,265sqm) since many projects launched during 2004 and 2008 were due for completion in 2008 and 2009. The impact of the slowdown was witnessed in 2010, with a lag of twelve to eighteen months. Between 2010 and 2015, the market grew from QAR244.9mn (255,712sqm) in 2010 to QAR472.4mn (532,937sqm) in 2015 at a CAGR of 14.0% in terms of value and 15.8% in terms of volume.
4.1.1.1.2. Demand Drivers
Demand Drivers: The demand for pre-fabricated labor accommodation is chiefly driven by large-scale commercial and infrastructure development projects, such as new roads, rail lines, hotels and stadiums, which require a substantially large labor workforce.
Customer Segment: Civil contractors undertaking construction of commercial and infrastructure development projects are the customer segment.
Key Influencers: Architects and interior designers can influence the decision on the selection of pre-fabricated buildings. Manufacturers of pre-fabricated buildings have to be listed as an approved vendor with the civil contractors.
4.1.1.1.3. Demand Forecast
The decline in oil prices during 2014 and 2015 is likely to affect the development of new projects, thereby dampening the momentum of construction activities across the country. The market size is estimated to have reduced by 40.6% from 532,937sqm in 2015 to 316,746sqm in 2016.
The market for pre-fabricated labor accommodation is expected to grow from 316,746sqm in 2016 to an estimated 360,022sqm in 2026, registering a CAGR of 1.3%. In value terms, the market would grow at a CAGR of 3.8% from QAR305.8mn in 2015 to reach QAR444.2mn in 2026.
Chart 31. Qatar’s Pre-fabricated Labor Accommodation Demand, 2001 to 2015
Market Size (Volume, 000's sqm) Market Size (Value, QAR mn)
2001
82
44
2002
103
56
2003
127
70
2004
149
87
2005
182
113
2006
214
160
2007
196
172
2008
380
328
2009
315
291
2010
256
245
2011
272
260
2012
316
343
2013
321
348
2014
326
339
2015
533
472
QA
R m
n
Tho
usan
d s
qm
0
100
200
300
400
500
600
0
100
200
300
400
500
600
Source: Team Analysis, ITC Trademap, MDPS Annual Bulletin of Building Permits and Competed Building Statistics
77Manufacture of Structural Metal Products
Chart 32. Qatar’s Pre-fabricated Labor Accommodation Demand Forecast, 2015 to 2026
533
472.4
2015
317
305.8
2016e
309
306.4
2017F
316
321.7
2018F
325
340.0
2019F
332
355.6
2020F
338
370.4
2021F
343
385.3
2022F
347
399.1
2023F
352
413.7
2024F
356
428.7
2025F
360
444.2
2026F
Market Size (Volume, 000's sqm) Market Size (Value, QAR mn)
QA
R m
n
Th
ou
san
d s
qm
0
100
200
300
400
500
600
0
50
100
150
200
250
300
350
400
450
500
Source: Team Analysis, ITC Trademap, MDPS Annual Bulletin of Building Permits and Competed Building Statistics
Import Volume Import Value
5.2
2001
7.6
2002
8.6
2003
17.0
2004
56
29.9
2005
174
130.0
2006
30
28.3
2007
196
138.9
2008
55
36.6
2009
24
24.3
2010
32
26.5
2011
77
107.4
2012
70
91.5
2013
127
130.0
2014
231
148.2
2015
QA
R m
n
Tho
usan
d s
qm
0
20
40
60
80
100
120
140
160
0
50
100
150
200
250
4.1.1.2. Trade Analysis
4.1.1.2.1. Historical Trade Analysis
Imports: The analysis of historical import data from 2001 indicates that imports have grown as per the real estate development trends in Qatar. Imports increased from 10,814sqm (QAR5.2mn) in 2001 to 195,718sqm (QAR138.9mn) in 2008. Thereon, imports have been irregular, rising and falling in alternate years to reach 231,017sqm (QAR148.2mn) in 2015.
Chart 33. Qatar’s Pre-fabricated Labor Accommodation Imports, 2001 to 2015
Source: ITC Trademap, Team Analysis
78 Manufacture of Structural Metal Products
Exports: The analysis of historical export data indicates that exports have been highly irregular and small as compared to the domestic production. Between 2001 and 2015, the annual exports averaged at 12,330sqm of pre-fabricated labor accommodation.
Chart 34. Qatar’s Pre-fabricated Labor Accommodation Exports, 2001 to 2015
UAE
China
Saudi Arabia
Turkey
South KoreaRest of the World
2010 2011 2012 2013 2014 2015
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Export Volume Export Value
QA
R m
n
Tho
usan
d s
qm
0.0
2001
1.1
2002
2.3
2003
0.4
2004
1.9
2005
3.0
2006
4.5
2007
4
4.3
2008
6
8.8
2009
66
40.7
2010
68
33.2
2011
10
4.8
2012
4
9.0
2013
0.8
2014
2.5
2015
0
10
20
30
40
50
60
70
80
0
5
10
15
20
25
30
35
40
45
Source: ITC Trademap, Team Analysis
4.1.1.2.2. Trade by Source and Destination
Imports: The analysis of pre-fabricated labor accommodation imports amounting to 561,530sqm from 2010 to 2015 indicates that the UAE (46%), China (20%), the KSA (14%), Turkey (14) and Korea (1%) are the major sources of imports.
Chart 35. Key Sources of Pre-fabricated Labor Accommodation Imports, 2010 to 2015
Source: ITC Trademap, Team Analysis
The area graph shown above indicates that the share of top five countries gradually increased from 89.5% in 2010 to 96.5% in 2015. While the UAE has dominated the imports since 2010, in the recent years, that share of China and Turkey has increased and that of Saudi Arabia has decreased.
79Manufacture of Structural Metal Products
Exports: The analysis of pre-fabricated labor accommodation exports amounting to 153,860sqm from 2010 to 2015 indicates that the UAE (47%), the KSA (47%), Oman (3%), Iraq (1%) and Kuwait (0.4%) are the major destinations for exports.
Chart 36. Key Destinations of Pre-fabricated Labor Accommodation Exports, 2010 to 2015
Domestic Sales Imports % Share of Imports
Tho
usan
d M
T
0
100
200
300
400
500
600
72
2001
8914.1%
2002
116
22.1%
2004
126
56
2005
40
174
81.3%
2006
166
30
15.2%
2007
185
196
51.5%
2008
260
55
17.3%
2009
232
24
9.4%
2010
240
32
11.6%
2011
238
77
24.6%
2012
251
70
21.8%
2013
198
12739.1%
2014
302
231
43.3%
2015
110
82 103149
182
214196
380
315
256 272
316 321 326
533
127
2003
13.3%
% s
hare
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
30.8%
2010 2011 2012 2013 2014 2015
UAE
Saudi Arabia Oman
IraqKuwait
Rest of the World
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Source: ITC Trademap, Team Analysis
The analysis of export data indicates that 95% to 99% of Qatar’s exports have been to GCC countries, such as the UAE, Saudi Arabia, Oman and Kuwait. In 2011, Qatar exported small quantities to Iraq. In the recent years, the UAE, Oman and Kuwait have been the leading destinations for exports.
4.1.1.2.3. Share of Imports in Domestic Consumption
Share of imports in Qatar’s pre-fabricated labor accommodation market was in the range of 13.1% to 22.1% during 2001 and 2004. Due to the spike in demand in 2006, the share of imports significantly increased to 81.3% of the market, but declined to the range of 15.2% to 21.8% of the market, between 2007 and 2013 (with the exception of 2008). Domestic players had larger market shares during 2009 and 2014. In 2015, 43.3% of the market was serviced by imports.
Chart 37. Qatar’s Pre-fabricated Labor Accommodation Imports Vs Domestic Sales, 2001 to 2015
Source: Team Analysis, ITC Trademap
80 Manufacture of Structural Metal Products
4.1.1.2.4. Assessment of Export Opportunities
Primary interviews with pre-fabricated building unit manufacturers indicate that, due to high cost of operations, Qatar’s production is not cost competitive and hence pre-fabricated labor accommodation unit manufacturers do not consider the export market as an attractive opportunity. Due to high cost of salaries, rents and raw materials, production cost in Qatar is high as compared to those in other countries in the GCC region. Analysis of export data indicates that during 2011 and 2015, exports of pre-fabricated labor accommodation averaged at 1.9% of the domestic production.
4.1.1.2.5. Trade Forecast
Imports: The import forecast of pre-fabricated labor accommodation units indicates that about 30.4% of the market requirements (in quantity terms) will be met by imports. Primary interviews with manufacturers of pre-fabricated buildings indicate that imports are 8% to 12% cheaper than domestic production, however, domestic manufacturers with their local expertise and quicker delivery time are expected to capture the bulk of the domestic demand. Imports are likely to range from 96,292sqm in 2016 to 109,448sqm in 2026.
Chart 38. Qatar’s Pre-fabricated Labor Accommodation Import Forecast, 2015 to 2026
2015 2016E 2017F 2018F 2019F 2020F 2021F 2022F 2023F 2024F 2025F 2026F
302
231
43.3%
220
96
30.4%
215
94
30.4%
220
96
30.4%
226
99
30.4%
231
101
30.4%
235
103
30.4%
239
104
30.4%
242
106
30.4%
245
107
30.4%
248
108
30.4%
251
109
30.4%
% s
hare
Tho
usan
d s
qm
0
100
200
300
400
500
600
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Domestic Sales Imports % Share of Imports
360
533
317 309 316 325 332 338 343 347 352 356
Source: Team Analysis, ITC Trademap
Exports: The export forecast of pre-fabricated labor accommodation units indicates that exports may have a minor opportunity as only 1.9% of the domestic production may be exported, subject to rare opportunities, e.g., Qatar-based manufacturer securing a job order from projects in the UAE or the KSA. Exports are likely to range from 4,280sqm in 2016 to 4,864sqm in 2026.
81Manufacture of Structural Metal Products
Chart 39. Qatar’s Pre-fabricated Labor Accommodation Export Forecast, 2015 to 2026
Domestic Sales Exports Exports as % of domestic production
% s
hare
Tho
usan
d s
qm
0
50
100
150
200
250
300
350
0%
1%
2%
3%
4%
5%
6%
7%
8%
9%
10%
2015 2016e 2017F 2018F 2019F 2020F 2021F 2022F 2023F 2024F 2025F 2026F
302
3.46
220
4.28
215
4.18
220
4.26
226
4.39
231
4.49
235
4.56
239
4.64
242
4.69
245
4.75
248
4.81
251
4.86
1.1%
1.9% 1.9% 1.9% 1.9% 1.9% 1.9% 1.9% 1.9% 1.9% 1.9% 1.9%
QA
R p
er s
qm
1,074
642
2015
1,100
657
2016E
1,129
674
2017F
1,161
694
2018F
1,192
712
2019F
1,220
729
2020F
1,249
746
2021F
1,279
764
2022F
1,310
782
2023F
1,341
801
2024F
1,373
820
2025F
1,406
840
2026F
Domestic price Import price
0
200
400
600
800
1,000
1,200
1,400
1,600
Source: Team Analysis, ITC Trademap
4.1.1.3. Pricing Analysis
Selling prices for pre-fabricated labor accommodation units are quoted on a per sqm basis and vary as per the size; type of material used for wall construction and flooring; number of floors and amenities such as kitchen, toilet, and storage tanks; which can be housed within the accommodation. Currently, the 2016 domestic prices for pre-fabricated labor accommodation units are in the range of QAR1,000 to QAR1,200 per sqm (average QAR1,100 per sqm). On an average, imports are 8% to 12% cheaper than domestic production. Considering the inflation rates in Qatar, average prices are expected to reach QAR1,406 per sqm in 2026 for domestic production and QAR840 per sqm for imports.
Chart 40. Qatar’s Pre-fabricated Labor Accommodation Selling Prices Forecast, 2015 to 2026
Source: Team Analysis, Primary Interviews
82 Manufacture of Structural Metal Products
4.1.2. Pre-fabricated Private Units
4.1.2.1. Demand-Side Analysis
Pre-fabricated private units include site offices, mosques, majlis, villa extensions and security cabins. The demand for these units is driven by both small- and large-scale real estate construction and infrastructure development projects. Construction of real estate asset classes such as villas and multi-story residential buildings are likely to be the prime demand drivers for most pre-fabricated private units.
4.1.2.1.1. Historical and Current Market Size
Between 2001 and 2007, the demand for pre-fabricated private units grew from QAR30.2mn (35,321sqm) in 2001 to QAR124.3mn (84,092sqm) in 2007, growing at a CAGR of 26.6% in terms of value and 15.6% in terms of volume. Market growth was driven by new developments and demand from construction projects related to the Asian Games 2006. The market peaked in 2008 to reach QAR274.6mn (162,971sqm) since many projects launched during 2004 and 2008. The slowdown of 2008 and 2009 led to subdued real estate development activities in the subsequent years, which reduced the market size to 109,591sqm in 2010. Thereon, the market recovered at a slow yet positive pace and is estimated to have reached QAR321.2mn in 2015 (208,722sqm).
4.1.2.1.2. Market Size Segmentation by Products
Pre-fabricated private units include site offices, mosques, majlis, villa extensions and security cabins. Mosques constitute the largest share of the pre-fabricated private units market with 40% share, followed by majlis with 20% share. Site offices and security cabins account for 15% market share each, followed by other units, such as rooms for drivers and maids and villa extensions, accounting for 10% of the market share.
Chart 41. Qatar’s Pre-fabricated Private Units Demand, 2001 to 2015
Market Size (Volume, 000's sqm) Market Size (Value, QAR mn)
2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 20152001
38
44
48
54
58
64
77
78
88
92
124
84
275
163
213
135
171
110
155
117
244
135
222
138
226
140
321
209
30
35
QA
R m
n
Tho
usan
d s
qm
0
50
100
150
200
250
300
0
50
100
150
200
250
300
350
Source: Team Analysis, ITC Trademap, MDPS Annual Bulletin of Building Permits and Competed Building Statistics
83Manufacture of Structural Metal Products
Chart 42. Pre-fabricated Private Units Segmentation, by Volume: Domestic, 2015
10% Others (driver/maid's room, etc.)
20% Majlis
15% Security cabins
15%Site offices
40%Mosque
Site offices Mosque Majlis Security cabinsOthers (driver/maid's room, etc.)
PreFAB private units 208,722sqm
Source: Team Analysis, Primary Interviews
4.1.2.1.3. Demand Drivers
Demand Drivers: The demand for pre-fabricated private units is chiefly driven by residential, commercial and infrastructure development projects such as housing projects, new roads, rail lines, hotels and stadiums.
Customer Segment: Civil contractors undertaking the construction of residential, commercial and infrastructure development projects are the customer segment.
Key Influencers: Architects and interior designers can influence the decision on selection of pre-fabricated private units. Manufacturers of pre-fabricated buildings have to be listed as an approved vendor with the civil contractors.
4.1.2.1.4. Demand Forecast
The decline in oil prices in 2014 and 2015 is likely to affect the development of new projects that are either planned or underway. This would dampen the momentum of construction activities across the country. The market size is estimated to have reduced by 35.0% from 208,722sqm in 2015 to 135,748sqm in 2016.
The market for pre-fabricated private units is expected to grow from 135,748sqm in 2016 to an estimated 154,295sqm in 2026, registering a CAGR of 1.30%. In value terms, the market would grow at a CAGR of 3.8% from QAR226.6mn in 2015 to reach QAR329.1mn in 2026.
Chart 43. Qatar’s Pre-fabricated Private Units Demand Forecast, 2015 to 2026
Market Size (Volume, 000's sqm) Market Size (Value, QAR mn)
2015 2016E 2017F 2018F 2019F 2020F 2021F 2022F 2023F 2024F 2025F 2026F
209
321.2
136
226.6
133
227.0
135
238.4
139
251.9
142
263.5
145
274.5
147
285.5
149
295.8
151
306.5
152
317.7
154
329.1
QA
R m
n
Tho
usan
d s
qm
0
50
100
150
200
250
300
0
50
100
150
200
250
300
350
400
Source: Team Analysis, ITC Trademap, MDPS Annual Bulletin of Building Permits and Competed Building Statistics
84 Manufacture of Structural Metal Products
4.1.2.2. Trade Analysis
4.1.2.2.1. Historical Trade Analysis
Imports increased from 4,305sqm (QAR2.5mn) in 2001 to 61,084sqm (QAR51.0mn) in 2006. Thereon, imports have been irregular, rising and falling in alternate years to reach 39,480sqm (QAR23.84mn) in 2015. The declining prices of steel along with fierce price competition in the market led to a sharp decline in import value post 2012, declining from QAR70.5mn in 2012 to QAR23.8mn in 2015.
Chart 44. Qatar’s Pre-fabricated Private Units Imports, 2001 to 2015
2004
13.3
19
2001
2.5
2002
3.6
2003
7
4.1
2006
61
51.0
2005
25.2
30
2007
21
34.6
2008
22
39.3
2009
22
33.7
2010
18
28.8
2011
44
40.7
2012
28
70.5
2013
37
53.0
2014
29
34.8
2015
39
23.8
QA
R m
n
Tho
usan
d s
qm
Import Volume Import Value
0
10
20
30
40
50
60
70
0
10
20
30
40
50
60
70
80
Tho
usan
d s
qm
Export Volume Export Value
QA
R m
n
0
1
2
3
4
5
6
7
0
1
2
3
4
5
6
7
8
2001
0.0
2002
1.3
0.7
2003
2.9
1.4
2004
0.3
2005
1.2
1.1
2006
1.3
1.8
2007
1.2
2.7
2008
1.5
2.6
2009
6.9
5.3
2010
7.2
6.6
2011
4.2
4.3
2012
0.9
2013
1.3
2014
0.0
2015
0.4
Source: ITC Trademap, Team Analysis
Exports: Analysis of historical export data indicates that exports have been highly irregular and small compared to the domestic production. During 2001 and 2015, the annual exports averaged at 1,946.7sqm of pre-fabricated private units.
Chart 45. Qatar’s Pre-fabricated Private Units Exports, 2001 to 2015
Source: ITC Trademap, Team Analysis
85Manufacture of Structural Metal Products
4.1.2.2.2. Trade by Source and Destination
Imports: The analysis of pre-fabricated private units’ imports amounting to 195,590sqm from 2010 to 2015 indicates that the UAE (66%), China (13%), India (5%), Turkey (4%) and the US (1%) are the major sources of imports.
Chart 46. Key Sources of Pre-fabricated Private Units Imports, 2010 to 2015
2010 2011 2012 2013 2014 2015
UAE
China
India
TurkeyThailand
Rest of the World
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
2010 2011 2012 2013 2014 2015
Saudi Arabia
UAE
BelgiumOman
Germany Rest of the World
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Source: ITC Trademap, Team Analysis
The UAE was the dominant source of imports during 2010 to 2015. Its share in import market peaked at 81.8% in 2013. The share of imports from India and China increased from 2013 to 2015.
Exports: The analysis of pre-fabricated private units exports amounting to 12,209sqm from 2010 to 2015 indicates that the KSA (65%), the UAE (26%), Belgium (4%), Oman (2%) and Germany (0.5%) are the major destinations for exports.
Chart 47. Key Destinations of Pre-fabricated Private Units Exports, 2010 to 2015
Source: ITC Trademap, Team Analysis
Exports from Qatar have been limited and primarily focused on markets such as Saudi Arabia, the UAE and Oman. Some minor quantity of exports was to Belgium and Oman during 2010 to 2012.
86 Manufacture of Structural Metal Products
4.1.2.2.3. Share of Imports in Domestic Consumption
The share of imports in Qatar’s pre-fabricated private units market was in the range of 12% to 13% during 2001 and 2003. Due to the spike in demand in 2006, the share of imports significantly increased to 67% of the market, but declined to the range of 14% to 27% of the market, between 2007 and 2015, with the exception of 2011 when the share of imports increased to 38%. Domestic players had larger market shares during 2007 and 2015.
Chart 48. Qatar’s Pre-fabricated Private Units Imports Vs Domestic Sales, 2001 to 2015
Source: Team Analysis, ITC Trademap
Tho
usan
d s
qm
Domestic Sales Imports % Share of Imports
12%
2001
13%
2002
7
12%
2003
19
29%
2004
30
39%
2005
61
67%
2006
25%
2007
22
14%
2008
22
17%
2009
18
17%
2010
44
38%
2011
28
21%
2012
37
27%
2013
29
21%
2014
31 38 48 45 48 30 63 141 113 91 72 107 101 111 169
39
35 4454 64
7892
84
163
135
110
117 135 138 140
209
19%
2015
% s
hare
0
25
50
75
100
125
150
175
200
225
0%
10%
20%
30%
40%
50%
60%
70%
80%
4.1.2.2.4. Assessment of Export Opportunities
Primary interviews with pre-fabricated building unit manufacturers indicate that, due to high cost of operations, Qatar’s production is not cost competitive and hence, pre-fabricated labor accommodation unit manufacturers do not consider the export market as an attractive opportunity. Due to high cost of salaries, rents and raw materials, production cost in Qatar is high as compared to other countries in the GCC region. Analysis of export data indicates that across 2010 to 2015, the exports of pre-fabricated private units averaged at 0.9% of the domestic production.
4.1.2.2.5. Trade Forecast
Imports: The import forecast of pre-fabricated private units indicates that about 24.3% of the market requirements (in quantity terms) will be met by imports. Primary interviews with manufacturers of pre-fabricated buildings indicate that imports are 8% to 12% cheaper than domestic production; however, domestic manufacturers with their local expertise and quicker delivery time are expected to capture the bulk of the domestic demand. Imports are likely to range from 32,997sqm in 2016 to 37,506sqm in 2026.
87Manufacture of Structural Metal Products
Chart 49. Qatar’s Pre-fabricated Private Units Import Forecast, 2015 to 2026
103
0.92
2016E
0.89%
100
0.90
2017F
0.9%
102
0.92
2018F
0.9%
105
0.94
2019F
0.9%
108
0.96
2020F
0.9%
110
0.98
2021F
0.9%
111
1.00
2022F
0.9%
113
1.01
2023F
0.9%
114
1.02
2024F
0.9%
115
1.03
2025F
0.9%
117
1.05
2026F
0.9%
169
0.19
2015
0.1%
% s
hare
Tho
usan
d s
qm
Domestic Sales Exports Exports as % of domestic production
0%
1%
2%
3%
4%
5%
6%
7%
8%
9%
10%
0
20
40
60
80
100
120
140
160
180
200
169
39
19%
2015
103
33
24%
2016E
100
32
24%
2017F
102
33
24%
2018F
105
34
24%
2019F
108
35
24%
2020F
110
35
24%
2021F
111
36
24%
2022F
113
36
24%
2023F
114
37
24%
2024F
115
37
24%
2025F
117
38
209
136 133 135 139 142 145 147 149 151 152 154
24%
2026F
% s
hare
Tho
usan
d s
qm
Domestic Sales Imports % Share of Imports
0
25
50
75
100
125
150
175
200
225
0%
5%
10%
15%
20%
25%
30%
35%
40%
45%
50%
Source: Team Analysis, ITC Trademap
Exports: The export forecast of pre-fabricated private units indicates that exports may have a minor opportunity as only 0.9% of the domestic production may be exported, subject to rare opportunities, e.g., Qatar-based manufacturer securing a job order from projects in the KSA or the UAE. Exports are likely to range from 919sqm in 2016 to 1,045sqm in 2026.
Chart 50. Qatar’s Pre-fabricated Private Units Export Forecast, 2015 to 2026
Source: Team Analysis, ITC Trademap
4.1.2.3. Pricing Analysis
Selling prices for pre-fabricated private units are quoted on a per sqm basis and vary as per the size, type of material used for wall construction and flooring, etc. Currently, the 2016 domestic prices are in the range of QAR1,250 to QAR1,900 per sqm (average QAR1,575 per sqm) for site offices, QAR1,650 to 2,800 per sqm (average QAR2,225 per sqm) for mosques, QAR1,000 to QAR 2,200 per sqm (average QAR1,600 per sqm) for majlis and QAR1,200 to QAR 1,800 per sqm (average of QAR1,500 per sqm) for security cabins. On an average, imports are 8% to 12% cheaper than domestic production. Considering the inflation rates in Qatar, average prices are expected to reach QAR2,301 per sqm in 2026 for domestic production and QAR1,612 per sqm for imports.
88 Manufacture of Structural Metal Products
Chart 51. Qatar’s Pre-fabricated Private Units Selling Prices Forecast, 2015 to 2026
QA
R p
er s
qm
Domestic price Import price
0
2015
1,757
1,231
2016E
1,800
1,261
2017F
1,848
1,294
2018F
1,900
1,331
2019F
1,950
1,366
2020F
1,997
1,399
2021F
2,044
1,432
2022F
2,093
1,466
2023F
2,143
1,501
2024F
2,194
1,537
2025F
2,247
1,574
2026F
2,301
1,612
500
1,000
1,500
2,000
2,500
2001 2002 2003
1.4
2004
2.4
2005
2.0
2006
5.2
2007
2.4
2008
2.7
2009
2.1
2010
3.4
2011
3.3
2012
7.0
2013
15.1
2014
11.9
0.2 0.3 0.41.7 3.4
3.1
12.4
5.9
2.5 2.93.9 5.5
10.0
34.9
12.6
2015
Tho
usan
d s
qm
Market Size (Volume, 000's sqm) Market Size (Value, QAR mn)
QA
R m
n
0
2
4
6
8
10
12
14
16
0
5
10
15
20
25
30
35
40
45
50
Source: Team Analysis, Primary Interviews
4.1.3. Pre-fabricated Greenhouse
4.1.3.1. Demand-Side Analysis
The market for pre-fabricated greenhouses is relatively small and accounts for 1.6% of the total pre-fabricated buildings market. This sector is serviced by imports since there are no domestic manufacturers specifically focusing on pre-fabricated greenhouses.
4.1.3.1.1. Historical and Current Market Size
There are, currently, no domestic manufacturers of pre-fabricated greenhouses in Qatar, hence the market size is represented entirely by imports. Between 2001 and 2015, the demand for pre-fabricated greenhouses grew from QAR0.2mn (207sqm) in 2001 to QAR12.4mn (11,855sqm) in 2015, growing at a CAGR of 33.8% in terms of value and 33.5% in terms of volume. The market growth was driven by the setting up of agro-based facilities such as Arab Qatari Agricultural Production Company, which is engaged in the production of cut flowers, ornamental plant production of vegetables and flower seedlings. The market peaked in 2014 to reach QAR34.9mn (15,148sqm).
Chart 52. Qatar’s Pre-fabricated Greenhouse Demand, 2001 to 2015
Source: Team Analysis, ITC Trademap
89Manufacture of Structural Metal Products
4.1.3.1.2. Demand Drivers
Demand Drivers: The demand for pre-fabricated greenhouses is driven by projects for cultivation of fruits, flowers and vegetables, in line with the Qatar government’s strategy to enhance the food security of the country, set forth in Qatar National Vision 2030.
Customer Segment: Civil contractors undertaking construction of greenhouse projects are the customer segment.
Key Influencers: Architects can influence the decision on selection of pre-fabricated private units. Manufacturers of pre-fabricated buildings have to be listed as an approved vendor with the civil contractors.
4.1.3.1.3. Demand Forecast
The market for pre-fabricated greenhouses is expected to grow from 6,041sqm in 2016 to an estimated 6,532sqm in 2026, registering a CAGR of 0.78%. In value terms, the market is expected to grow at a CAGR of 3.3% from QAR6.6mn in 2015 to reach QAR9.1mn in 2026.
Chart 53. Qatar’s Pre-fabricated Greenhouse Demand Forecast, 2015 to 2026
2015
Market Size (Volume, 000's sqm) Market Size (Value, QAR mn)
2016e 2017F 2018F 2019F 2020F 2021F 2022F 2023F 2024F 2025F 2026F
11.9
12.6
6.0 5.8 5.7 5.8 6.0 6.1 6.2 6.3 6.4 6.5 6.5
QA
R m
n
Tho
usan
d s
qm
0123456789
101112131415
0123456789101112131415
6.6 6.5 6.6 6.8 7.2 7.5 7.9 8.2 8.5 8.8 9.1
Source: Team Analysis, ITC Trademap, MDPS Annual Bulletin of Building Permits and Competed Building Statistics
Source: ITC Trademap, Team Analysis
4.1.3.2. Trade Analysis
4.1.3.2.1. Historical Trade Analysis
Imports: This increased from 207sqm (QAR0.21mn) in 2001 to 5,211sqm (QAR12.4mn) in 2007. Thereon, imports have been irregular, rising and falling in alternate years to reach 11,855sqm (QAR12.6mn) in 2015.
Chart 54. Qatar’s Pre-fabricated Greenhouse Imports, 2001 to 2015
2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015
Import Volume Import Value
0.2 0.3 0.41.7
2
3.4
2
3.1
5
12.4
2
5.9
3
2.5
2
2.9
3
3.9
3
5.5
7
10.0
15
34.9
12
12.6
Tho
usan
d s
qm
QA
R m
n
0
2
4
6
8
10
12
14
16
0
5
10
15
20
25
30
35
40
90 Manufacture of Structural Metal Products
4.1.3.2.2. Trade by Source and Destination
Imports: The analysis of pre-fabricated greenhouse imports amounting to 42,849 sqm from 2010 to 2015 indicates that the China (55%), Jordan (22%), Italy (8%), Korea (3%) and Netherlands (3%) are the major sources of imports.
Chart 55. Key Sources of Pre-fabricated Greenhouse Imports, 2010 to 2015
2010 2011 2012 2013 2014 2015
China
Jordan
ItalySouth Korea
Netherlands
Rest of the World
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Source: ITC Trademap, Team Analysis
Chinese greenhouses, followed by Jordanian imports, dominated the import market in Qatar during 2010 to 2015. In the recent past, Italian products have made a headway into Qatar market with South Korea and the Netherlands having minor shares.
4.1.3.2.3. Share of Imports in Domestic Consumption
Due to lack of domestic manufacturing of pre-fabricated greenhouses, the share of imports has been 100% throughout.
Chart 56. Qatar’s Pre-fabricated Greenhouse Imports Vs Domestic Sales, 2001 to 2015
12 2
5
2 3 23 3
7
15
12
100% 100% 100% 100% 100% 100% 100% 100% 100% 100% 100% 100% 100% 100% 100%
0%
20%
40%
60%
80%
100%
120%
0
2
4
6
8
10
12
14
16
2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015
% s
hare
Tho
usan
d s
qm
Domestic Sales Imports % Share of Imports
Source: Team Analysis, ITC Trademap
91Manufacture of Structural Metal Products
4.1.3.2.4. Assessment of Export Opportunities
Due to lack of domestic manufacturing of pre-fabricated greenhouses, there are no potential export opportunities. The domestic market for pre-fabricated greenhouses is small in size to warrant the establishment of a new facility catering entirely to this segment. Primary interviews with domestic manufacturers indicate that apart from small volumes, import prices are difficult to compete with, hence none of the local manufacturers currently cater to this segment.
4.1.3.2.5. Trade Forecast
Imports: The import forecast of pre-fabricated greenhouses indicates that 100% of the markets requirement (in quantity terms) will be met by imports. Imports are likely to range from 6,041 sqm in 2016 to 6,532 sqm in 2026.
Chart 57. Qatar’s Pre-fabricated Greenhouse Import Forecast, 2015 to 2026
100%
11.9
2015
100%
6.0
2016E
100%
5.8
2017F
100%
5.7
2018F
100%
5.8
2019F
100%
6.0
2020F
100%
6.1
2021F
100%
6.2
2022F
100%
6.3
2023F
100%
6.4
2024F
100%
6.5
2025F
100%
6.5
2026F0%
20%
40%
60%
80%
100%
120%
0
2
4
6
8
10
12
14
% s
hare
Tho
usan
d s
qm
Domestic Sales Imports % Share of Imports
Source: Team Analysis, ITC Trademap
4.1.3.3. Pricing Analysis
Import prices for pre-fabricated greenhouses are in the range of QAR 1,000 to 1,200 per sqm. Considering the inflation rates in Qatar, prices average prices are expected to reach QAR1,394 per sqm in 2026.
Chart 58. Qatar’s Pre-fabricated Greenhouse Selling Prices Forecast, 2015 to 2026
QA
R p
er s
qm
2017F 2018F 2019F 2020F 2021F 2022F 2023F 2024F
Import price
0
200
400
600
800
1,000
1,200
1,400
1,600
2015
1,065
2016E
1,091 1,120 1,152 1,182 1,210 1,239 1,268 1,299 1,330
2025F
1,361
2026F
1,394
Source: Team Analysis, ITC Trademap
92 Manufacture of Structural Metal Products
4.1.4. Supply-Side Analysis
4.1.4.1. Market Structure
Qatar is home to about 20 firms operating in the pre-fabricated building market. Based on the capacities of the firms, they can be classified as large, medium and small. Most large and medium pre-fabricated buildings firms have capabilities to undertake fabrication all types of pre-fabricated buildings (labor accommodation, private units, etc.), while small firms focus on construction of private units such as site offices, security cabins, mosques and majlis.
Chart 59. Qatar’s Pre-fabricated Buildings Market Structure and Capacity Utilization
Small-sized Firms
Based on the insights from primary interviews with manufacturers of pre-fabricated buildings, these firms have an installed capacity of 6,000sqm per annum or less, with less than 10 employees and capacity utilization of about 35.7%68. The small companies mainly focus on the construction of site offices, security cabins, mosques and majlis. Qatar has 11 such firms that collectively control 5.0% share of the total sales by domestic firms.
Medium-sized Firms
There are five medium-sized firms, each having an average installed capacity of greater than 6,000sqm per annum and less than 180,000sqm per annum. The medium-sized firms collectively hold 11.8% share of the market in volume terms and their average capacity utilization is 37.5%.
Large-sized Firms
Qatar’s top-4 leading firms form the group of large-sized firms. In terms of quantity, they collectively hold 83% share of the sales by domestic players. In terms of products and services, the leading players have capabilities to manufacture all types of pre-fabricated buildings but focus on large volume segments such as labor accommodations, site offices and security cabins.
11.8%Medium
83.2%Large
5.0%Small
Large Medium Small0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
%
Tho
usan
ds
sqm
Installed capacity Capacity Utilization (%)
0
200
400
600
800
1,000
692
150
66
57.1%
37.5% 35.7%
Source: Team Analysis, Primary Interviews, MDPS Annual Bulletin of Industry and Energy Statistics 2015
68 Primary Interviews
93Manufacture of Structural Metal Products
Table 13. Pre-fabricated Buildings Market Structure Snapshot
Structural Steel Fabrication Units Large Medium Small Total
Number of players Number 4.0 5.0 11.0 20
Capacity in sqm per month sqm 14,410 2,500 500
Total capacity p.a. sqm 691,680 150,000 66,000 907,680
Sales sqm 395,000 56,250 23,560 474,810
Capacity utilisation % 57.1% 37.5% 35.7% 52.3%
Market share % 83.2% 11.8% 5.0% 100%
Source: Team Analysis, Primary Interviews, MDPS Annual Bulletin of Industry and Energy Statistics 2015
4.1.4.2. Profiling of Key Domestic Players
Table 14. Pre-fabricated Buildings: Key Domestic Players
Company Year of Establishment ProductsInstalled capacity
(SQM/P.A)
Spacemaker (Subsidiary of Gulf Contracting Company)
1976 All types of pre-fabricated buildings 300,000
Qatar Prefab (Al Hamadi Group) 1983 All types of pre-fabricated buildings 144,000
Al Wasit Cabins (GETC Group) 1993 All types of pre-fabricated buildings 144,000
Qatar Speed House (Subsidiary of Aal Imran Housing)
2002 All types of pre-fabricated buildings 100,000
ANG Qatar 2005 All types of pre-fabricated buildings 100,000
Aal Imran Housing 1981 All types of pre-fabricated buildings 40,000
Skycool Trading and Contracting 2012 All types of pre-fabricated buildings 40,000
The other players in the market include HydroTech Energy Qatar, Super Cabin, Al Attiyah Caravan Factory, Al Maher Construction & Services, Al Muftah Interiors, Qatar Specialized Engineering & Construction, Steel Cabin Co and Ocean Cross Engineering.
4.1.4.3. Business Model Analysis
The pre-fabricated buildings market is dominated by large players that have the capacity and capability to focus on a varied mix of products, projects and customers. Large players typically target labor accommodations, security cabins and site office segments, which are high volume projects having an average project size of 40,000sqm. Large-sized players are typically backed by their parent companies, which are well-established construction companies, e.g., Spacemaker is a subsidiary of the Gulf Contracting Company while Qatar Prefab is a part of the Al Hamadi Group. This provides the large-sized firms with financial support, local expertise as well as access to major projects across the country.
The small- and medium-sized players also target labor accommodation, security cabins and site office segments; however, they may lack the ability and resources (manpower and machinery) to handle large-scale projects. Hence, they primarily focus on smaller-scale projects with an average project size of 1,000sqm.
Given the low-entry barriers, widespread application of pre-fabricated buildings and a large market size, pre-fabricated buildings has been an attractive sector for Qatari entrepreneurs. The market is competitive with several firms operating in the market and each targeting the same project, the competition to win contracts is intense.
94 Manufacture of Structural Metal Products
4.1.4.4. Domestic Production Competitiveness
Key factors that influence the competitiveness of the domestic production of pre-fabricated buildings include raw material, labor, market size and impact of competition.
Raw Material: Qatar does not domestically produce raw materials, such as slit coils of galvanized iron. The domestic raw material production capacity is underdeveloped in the country, hence, manufacturers in Qatar depend on imports to meet their raw material needs.
Our primary research indicates that raw materials are procured from the UAE, the KSA, China, India and Turkey. Expensive raw materials significantly impact the cost of domestically produced finished goods.
High Operational Expenses: Our primary interviews indicate that the operational costs are significantly high in Qatar due to higher labor costs and rent than in the nations exporting to Qatar — Kuwait, the UAE, the KSA, India, China, Turkey, etc. This adversely affects the price competitiveness of the domestic production.
Time to Market: According to industry players, procuring raw material is time consuming, which leaves them with little time to fabricate and deliver finished products to customers.
This increases the requirement for raw material inventory since manufacturers either have to procure raw materials in advance, adding to the inventory costs or purchase raw materials at current market rates, which may be higher than the quotations submitted for job works, adversely affecting their price competitiveness.
Number of Players: The pre-fabricated buildings market is well organized with the top-4 players capturing almost 85% of the market. Medium and small players typically target smaller-scale projects than those targeted by the market leaders. The market being oversupplied is characterized by fierce competition and price sensitivity.
4.1.5. Demand–Supply AnalysisConsidering the 20 firms operating in the market, the installed capacity is 907,680sqm per annum. This does not include assumptions for new players having plans to enter the market that have not been announced so far. As per market size estimates (including imports projection), the demand–supply gap indicates an oversupply of 433,269sqm in 2020 to 393,363sqm in 202669.
69 Team Analysis
Tho
usan
d s
qm
PreFAB Building Market Size (Total Demand, incl. imports) Thousand sqmSupply (Installed capacity) Thousand sqm Demand Supply Gap
742
452
442
451
464
474
483
490
496
502
508
514
908
908
908
908
908
908
908
908
908
908
908
908
(166)
(455) (466) (457) (443) (433) (425) (417) (412) (406) (399) (393)
(600)
(400)
(200)
0
200
400
600
800
1,000
2015E 2016F 2017F 2018F 2019F 2020F 2021F 2022F 2023F 2024F 2025F 2026F
Chart 60. Qatar’s Pre-engineered Buildings Demand-Supply Analysis, 2015 to 2026
Source: Team Analysis, Primary Interviews, MDPS Annual Bulletin of Industry and Energy Statistics 2015, ITC Trademap
95Manufacture of Structural Metal Products
4.1.6. Regulatory AnalysisQCS 2014: As pre-fabricated buildings are used in the construction sector, their production, installation and usage are mainly regulated as per the following sections of Qatar Construction Specifications (QCS) 2014:70
a) QCS 2014 Section 16: Structural steelworks This section has general instructions and regulations related to materials, drawing, fabrication, welding, bolting, accuracy of fabrication, erection, accuracy of erected steel work and protected treatment.
b) QCS 2014 Section 17: Metal work This section has general instructions and regulations related to material classification, metal doors and windows, architectural metalwork, light metal support, cladding support and workmanship.
In addition to the above, steel fabrication units need to be familiar with other relevant sections of the QCS that regulate construction activities having an interface with pre-fabricated buildings. These sections include section 13 (masonry), section 14 (roofing), section 4 (foundation and retaining structures) and section 5 (concrete).
The Ministry of Environment: Pre-fabricated buildings manufacturing units need to be approved by the Ministry of Environment.
Civil Defense Department (Ministry of Interior): All building material products need an approval from the Civil Defense Department (Ministry of Interior) as per Emiri Decree No. 9/2012. Pre-fabricated buildings manufacturing units have to comply with the applicable fire safety norms.
ISO Certification: Obtaining ISO certifications (Quality 9001, OHSAS 18001 and Environment 14,001) are vital for tendering purposes.
Labor Standards: Pre-fabricated labor accommodations in Qatar need to comply with all the government labor standards on minimum space requirements, amenities and other mandatory requirements set by Ashghal, Qatar Foundation, Qatar Rail and Supreme Committee for Delivery and Legacy.
Apart from the above, all prospective entrepreneurs need to follow applicable laws related to company registration, industrial license and obtaining land and building permissions for setting up a pre-fabricated buildings manufacturing facility in Qatar.
70Qatar Construction Specifications (QCS) 2014
96 Manufacture of Structural Metal Products
4.1.7. SWOT Analysis and Michael Porter’s Five Forces Model Analysis
4.1.7.1. SWOT Analysis
Figure 14: Pre-fabricated Buildings SWOT Analysis
Summary:
Pre-fabricated buildings save time and are cost effective since they are mainly made up of standard sections and connections, and consumes less raw materials apart from being easy to transport, install and dismantle. Its weaknesses include difficulty in exporting domestic production and in achieving product differentiation on parameters other than price. New industrial projects and manufacturing facilities are the opportunity areas, while competitive rivalry and price-sensitive market are the threats.
• Upcoming industrial, warehousing, rail projects and setting up of manufacturing facilities in the next 10 years is likely to drive the demand for pre-fabricated labor accommodations and other private units in 2016 to 2026.
• Widespread use in labor accommodations, site offices, security cabins, mosques, etc.
• Pre-fabricated buildings can be constructed as permanent as well as temporary structures, which are portable and can be easily moved from various site locations.
• Quick and efficient as pre-fabricated buildings are mainly made up of standard sections and connections, significantly reducing design time; basic designs are used over a long period of time.
• Simple design, easy to construct and lightweight; uses less steel and no concrete, and hence is considered a quicker and cheaper alternative to conventional buildings.
STRENGTHS OPPORTUNITIES
• Low-priced imports is adversely impacting the salability of domestic production.
• Intense rivalry between fabricators is threatening new entrants.
• Highly price-sensitive market, with large-sized organized players are dominating the market due to their sheer scale, market access and capabilities.
• Dependence on imports for raw materials is affecting price competitiveness.
• Domestic manufacturers are unable to export due to the presence of well-established players in the GCC countries, such as Kuwait, the UAE and the KSA, which benefit from cheaper (8% to 15%) raw material prices.
THREATSWEAKNESSESSWOT
Pre-fabricated Buildings
97Manufacture of Structural Metal Products
4.1.7.2. Michael Porter’s Five Forces Model Analysis
Figure 15: Michael Porter’s Five Forces Model (Pre-fabricated Building)
High:
• Competitive rivalry is high due to the presence of several well-established players operating in the market.
• Intense competitive rivalry ensures that price and relationship are the key deciding factors in securing a job order.
COMPETITIVE RIVALRY
High:
• Pre-fabricated buildings manufacturing is neither capital intensive nor technology intensive.
• Hence, the threat of entry is low.
THREAT OF NEW ENTRY
Medium:
• Limited number of organized pre-fabricated buildings suppliers dominate the business.
• There is some scope for product differentiation on technical grounds. The buying power of consumers is medium.
BARGAINING POWER – CONSUMERS
High:
• Raw materials for pre-fabricated buildings manufacturing (e.g., steel sheets, slit coils) are not manufactured in Qatar; hence, manufacturers have to rely on imports.
• Suppliers have high bargaining power.
BARGAINING POWER – SUPPLIERS
Low:
• Due to their light structure and fast construction pace, pre-fabricated buildings are unlikely to be replaced by other structures.
• Hence, the threat of substitution is low.
THREAT OF SUBSTITUTION
98 Manufacture of Structural Metal Products
4.2. Critical Success FactorsFollowing are the critical factors for success:
Figure 16: Critical Success Factors - Pre-fabricated Building
Access to Raw Material
Raw material forms a major part of the costs incurred by steel fabrication units. Costs related to these are influenced by global trends in the commodity prices. Entrepreneurs are unlikely to have any control on raw material prices. Hence, competitiveness49 in procurement and compliance with good practices in raw material and inventory management, such as economic order quantity and just in time, are essential.
Operational Efficiency
Efficiency in day-to-day operations — fabrication, supervision and other shop floor activities — can help in cost optimization. Compliance with ISO norms for Quality (ISO 9001), OHSAS (ISO 18,001) and Environment (ISO 14001) could lead to standardization50
of procedures, bring in checks and balances, and help achieve compliance with regulatory norms. This can be a key tool in achieving efficiency in operations.
Customer Service
A thorough understanding of clients’ requirements is crucial for companies to gain the trust of their customers. Fabricators need to constantly work along with their clients in order to provide them with seamless solutions and gain a deep understanding of their challenges and requirements.
Access to Markets and Strategic Linkages with Civil Contractors
Entrepreneurs need to develop a strong relationship and strategic linkages with civil contractors as this would help sustain a steady order book.
Technical Know-how
Technical knowledge of fabricators, workforce and sales team are important factors to execute highly complex projects with optimum efficiency51 and minimal errors. Technical know-how enables fabricators to stay ahead of the competition as well as deliver leading services to their customers.
Investment in Machinery
Companies need to invest in modern machinery, experienced welders, designers and project managers. This would enable them to undertake highly complex projects and gain an edge over the competition.
99Manufacture of Structural Metal Products
High High High
Medium Medium Medium
Access to raw material
Access to markets and strategic linkages
Operational efficiency
Technical know-how
Customer service
Investment in machinery
4.3. Outlook
Qatar’s pre-fabricated buildings market has witnessed a steady growth, with the demand growing from 262,305sqm (QAR193mn) in 2005 to 753,514sqm (QAR806mn) in 2015, indicating a CAGR 11.1% in volume and 15.4% in value terms.
Large-scale real estate construction and infrastructure development projects for FIFA 2022 World Cup and the Qatar National Vision 2030 are expected to provide a boost to pre-fabricated products, such as labor accommodations, security cabins and site offices.
In the medium to long term, large-scale developments, such as the Qatar rail and metro, New Doha Port Development, SEZs promoted by Manateq, FIFA 2022 stadium, industrial projects and upcoming real estate projects, would drive the demand for pre-fabricated buildings. On the back of the demand drivers, the market is expected to grow at a CAGR of 3.8% from QAR539mn in 2016 to an estimated QAR782mn in 2026.
Pertaining to the challenges, the market is likely to remain competitive and price sensitive. Dependence on imports for procurement of raw materials and higher operational expenses (salaries, rents, etc.) than in other countries, such as the UAE and the KSA, would limit export potential to rare opportunities, i.e., less than 1% of domestic production. Imports are likely to remain cheaper than domestic production and further heighten the challenges. Domestic players have an upper hand in terms of market knowledge, access to projects, support of their well-established parent companies and quicker turnaround time than importers.
The 2016 market size and growth rate of the pre-fabricated buildings segment till 2026 points to an average incremental opportunity of QAR24.4mn (6,231sqm) per annum, for new players to tap into from 2017 to 2026, subject to competitive challenges. As the average incremental business per annum till 2026 is low for offering viable opportunities71, entrepreneurs would have to focus on being cost competitive to be able to compete and gain market share from established players in the market.
71 Team Analysis
100 Manufacture of Structural Metal Products
5. Architectural Steel Fabrication
5.1. Qatar Market OverviewArchitectural steel fabrication emerges as a significant segment of the structural metal products sector. It serves varied needs of the real estate sector across asset classes such as villas, multi-story buildings, commercial developments, public buildings and industrial facilities.
The architectural steel fabrication market constitutes a sizable portion (12.4%) of the structural metal products sector72. In terms of domestic production value, it has 11.7% share of the overall structural metal products sector. Key products in architectural steel fabrication are:
a) Entrance gates
b) Decorative doors
c) Steel flush doors
d) Rolling shutters
e) Steel staircase railing
f) Grills and fencing
Chart 61. Architectural Steel Fabrication Market Segmentation, 2015
Rolling Shutter Staircase railing Grill and fencing
Entrance Gate Decorative doors Steel flush doors
38.5%Grill andfencing
26.3%Staircase railing
15.1%Entrance Gate
9.7%Decorative doors
4.9%Steel flush doors
5.5%Rolling Shutter
Architectural Steel Fabrication
MarketQAR961mn
Source: Team Analysis, ITC Trademap, MDPS Annual Bulletin of Building Permits and Competed Building Statistics
The 2015 architectural steel fabrication market73 is estimated at QAR961mn. Real estate asset classes, such as villas and multi-story residential developments, are likely to be the prime driver of most architectural products. Key products include grills and fencing (38.5%), steel staircase railing (26.3%), entrance gates (15.1%) and decorative doors (9.7%). Going forward, the market is expected to grow at a CAGR of 3.7% to reach an estimated QAR909mn in 2026.
72,73 Team Analysis
101Manufacture of Structural Metal Products
The structure of Qatar’s steel fabrication market that comprises 467 firms is fragmented. Most steel fabrication units have capabilities to undertake both architectural steel fabrication and structural steel fabrication works. Based on the capacities of the architectural steel fabrication firms, they can be classified as large, medium and small. Medium-sized firms have 70% share of sales by domestic players followed by small-sized players and large-sized layers that have 20% and 10% share, respectively.
The subsequent sections of the report provide a detailed market analysis of each of the products listed above.
2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015
Tho
usan
d s
qm
Market Size (Volume, 000's sqm) Market Size (Value, QAR mn)
QA
R m
n
19 2430 36 42 49 55
7969
60 5470 73 74
117
13 1723
2938
45
64
104
72 72 71
92100
106
145
0102030405060708090
100110120130140150
0
15
30
45
60
75
90
105
120
135
150
Chart 62. Qatar’s Entrance Gates Demand, 2001 to 2015
Source: Team Analysis, ITC Trademap, MDPS Annual Bulletin of Building Permits and Competed Building Statistics
5.1.1. Entrance GatesEntrance gates are the main gates installed along the compound walls of buildings. These serve an important purpose of securing the building and its occupants as well as controlling ingress into the compound premises.
Entrance gates are fabricated from steel sheets, plates, rods and sections. A variety of entrance gates are available in different sizes, shapes, designs, apart from accessories made of other metals, such as brass and aluminum.
5.1.1.1. Demand-Side Analysis
5.1.1.1.1. Historical and Current Market Size
The market size for entrance gates has followed the real estate development trends. The market size grew from 19,311sqm (QAR13.2) in 2001 to a peak of 78,918sqm (QAR103.6mn) in 2008, implying a CAGR of 22.3%. The slowdown of 2008 and 2009 led to subdued real estate development activity in the subsequent years that reduced the market size to 54,093sqm in 2011. Thereafter, the market recovered and is estimated to have reached 116,836sqm in 2015 (QAR145.2mn).
102 Manufacture of Structural Metal Products
5.1.1.1.2. Market Size Segmentation by Products
Entrance gate for villas is the largest segment accounting for 86% of the demand74. Villas constitute 45% of upcoming real estate developments in Qatar and have high consumption rates (sqm of entrance gate consumed per 1,000sqm of built-up area) of entrance gates. Multi-story residential and industrial developments are the next important segments having 6% and 4% of the market share, respectively.
Chart 63. Entrance Gates Market Segmentation, 2015
1% Public buildings
1% Commercial
6% Multi-storey residential
2%Others
4% Industrial
86%Villas
Commercial Industrial OthersVillas Multi-storey residential Public buildings
Entrance Gate Market
116,836 sqm
Source: Team Analysis, MDPS Annual Bulletin of Building Permits and Competed Building Statistics, Primary Interviews
5.1.1.1.3. Demand Drivers
Demand for entrance gates is driven by requirements arising from real estate development projects that include various asset classes, such as villas, multi-story residential buildings, commercial developments, public buildings and industrial facilities. Civil contractors undertaking construction contracts comprise the customer segment. Architects and interior designers who design entrance gates are the key influencers.
5.1.1.1.4. Demand Forecast
The decline in oil prices in 2014 and 2015 is likely to affect the development of new projects that are either planned or underway. The market size is estimated to have reduced by 38.2% from 116,836sqm in 2015 to 72,205sqm in 2016.
Going forward, the entrance gate market is expected to grow from 72,205sqm in 2016 to an estimated 81,564sqm in 202675, registering a CAGR of 1.2%. In value terms, the market would grow at a CAGR of 3.7% from QAR93mn in 2015 to reach QAR134mn in 2026.
74,75 Team Analysis
103Manufacture of Structural Metal Products
Chart 64. Qatar’s Entrance Gates Demand Forecast, 2015 to 2026
Tho
usan
d s
qm
Market Size (Volume, 000's sqm) Market Size (Value, QAR mn)
QA
R m
n
0
10
20
30
40
50
60
70
80
90
100
110
120
130
0
15
30
45
60
75
90
105
120
135
150
117
72 70 72 74 75 77 78 79 80 81 82
145
93 93 97102
107 112 116 121 125 129 134
2015 2016E 2017F 2018F 2019F 2020F 2021F 2022F 2023F 2024F 2025F 2026F
Tho
usan
d s
qm
Import Volume Imports Value
QA
R m
n
0
10
20
30
40
50
60
0
5
10
15
20
25
30
35
40
45
50
2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015
3 3 4 39
17 13
22
47
31 32 2924
28
46
2 35 4
1014
18
30
45 4440
36
4548
38
Source: Team Analysis, ITC Trademap, MDPS Annual Bulletin of Building Permits and Competed Building Statistics
5.1.1.2. Trade Analysis
5.1.1.2.1. Historical Trade Analysis
Imports: The analysis of historical import data76 from 2001 indicates that imports have grown as per the real estate development trends in Qatar. Imports increased from 3,361sqm (QAR2.1mn) in 2001 to 22,491sqm (QAR30.2mn) in 2008. Imports more than doubled to 47,442sqm (QAR45mn) in 2009, when due to slowdown, inexpensive imports were preferred over domestic production. Thenceforth, imports fell during 2010 and 2014 and again gained preference (45,889sqm, QAR48.3mn) in 2015.
Chart 65. Qatar’s Entrance Gates Imports, 2001 to 2015
Source: ITC Trademap, Team Analysis
76 Team Analysis
104 Manufacture of Structural Metal Products
Exports: The analysis of historical export data77 indicates that exports have been very irregular and very small as compared to the domestic production. During 2001 and 2015, annual exports averaged at 207sqm of entrance gates.
Chart 66. Qatar’s Entrance Gates Exports, 2001 to 2015
Tho
usan
d s
qm
Export Volume Exports Value
QA
R m
n
2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015
30.00
0.20
0.40
0.60
0.80
1.00
1.20
0.00
0.10
0.20
0.30
0.40
0.50
0.60
0.70
0.80
0.18
0.97
0.25 0.270.13
0.63
0.000.03 0.05 0.05
0.03 0.010.04
0.00
0.13
0.380.32
0.68
0.15
0.48
0.06
0.170.20
Source: ITC Trademap, Team Analysis
5.1.1.2.2. Share of Imports in Domestic Consumption
The share of imports in Qatar’s entrance gate market grew from 17% in 2001 to 28% in 200878. After the global economic crisis of 2008 to 2009, the share of imports further grew to reach 52% to 69% during 2009 and 2011, due to a preference for inexpensive imports. As the economy recovered, the share of imports reduced in during 2012 and 2014 and reached 39% in 2015. On an average, during 2001 and 2015, 36.8% of the market was serviced by imports.
Chart 67. Qatar’s Entrance Gates Imports Vs Domestic Sales, 2001 to 2015
2001
Tho
usan
d s
qm
% s
hare
Domestic Sales Imports % Share of Imports
0
20
40
60
80
100
120
140
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015
16 20 26 33 33 32 42 56 22 29 22 41 49 46 71
3 34
39 17
13
22
47 3132
2924 28
46
1924
3036
4249
55
7969
6054
70 73 74
117
17%
14% 15%
35%
24%28%
69%
52%59%
41%
33%38%
39%
Source: Team Analysis, ITC Trademap
77, 78 Team Analysis
105Manufacture of Structural Metal Products
5.1.1.2.3. Assessment of Export Opportunities
Primary interviews with architectural steel fabrication units indicate that, due to the high cost of operations, Qatar’s production is not cost competitive and hence architectural steel fabrication units do not consider the export of entrance gates an attractive opportunity. Due to high salaries, rents and cost of raw material, production cost in Qatar is higher than in other countries in the GCC region. The analysis of export data indicates that during 2001 to 201579, the exports of entrance gates were only 0.58% of domestic production.
5.1.1.2.4. Trade Forecast
Imports: The import forecast of entrance gates indicates that about 36.8% of the market requirements (in quantity terms) will be met by imports80. Primary interviews indicate that imports are about 20% to 30% cheaper than domestic production. Imports are likely to range from 26,605sqm in 2016 to 30,054sqm in 2026.
Chart 68. Qatar’s Entrance Gates Import Forecast, 2015 to 2026
Tho
usan
d s
qm
% s
hare
Domestic Sales Imports % Share of Imports
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
7146 45 45 47 48 48 49 50 50 51 52
46
27 26 26 27 28 28 29 29 29 30 30
117
72 70 72 74 75 77 78 79 80 81 82
39.3% 36.8% 36.8% 36.8% 36.8% 36.8% 36.8% 36.8% 36.8% 36.8% 36.8% 36.8%
0102030405060708090
100110120130140150
2015 2016E 2017F 2018F 2019F 2020F 2021F 2022F 2023F 2024F 2025F 2026F
Source: Team Analysis, ITC Trademap
Exports: The export forecast81 of entrance gates indicates that exports may have a minor opportunity as only 0.58% domestic production may be exported, subject to rare opportunities, e.g., a Qatari customer choosing to build a villa in the KSA and sourcing82 from Qatar-based fabricators. Exports are likely to range from 264sqm in 2016 to 298sqm in 2026.
Chart 69. Qatar’s Entrance Gates Export Forecast, 2015 to 2026
Tho
usan
d s
qm
% s
hare
Domestic Sales Exports Exports as % of domestic production
2015 2016E 2017F 2018F 2019F 2020F 2021F 2022F 2023F 2024F 2025F 2026F
0
10
20
30
40
50
60
70
80
90
100
0.0%
0.5%
1.0%
1.5%
2.0%
2.5%
3.0%
3.5%
4.0%
4.5%
5.0%
71
46 45 46 47 48 49 50 50 51 51 52
0.08
0.26 0.26 0.26 0.27 0.28 0.28 0.29 0.29 0.29 0.30 0.30
0.11%0.58% 0.58% 0.58% 0.58% 0.58% 0.58% 0.58% 0.58% 0.58% 0.58% 0.58%
Source: Team Analysis, ITC Trademap
79,81 ITC Trademap Database80,82 Team Analysis
106 Manufacture of Structural Metal Products
5.1.1.3. Pricing Analysis
The selling prices83 of entrance gates are quoted on the basis of per sqm and vary as per the size, design, color and other specifications. Currently, the 2016 domestic prices84 for entrance gates are in the range of QAR700 to QAR2,000 per sqm (average of QAR1,400 per sqm). On an average, imports are 23% cheaper than domestic production. Considering the inflation rates69 in Qatar, average prices are expected to reach QAR1,789 per sqm for domestic production and QAR1,377 per sqm for imports in 2026.
Chart 70. Qatar’s Entrance Gates Selling Prices Forecast, 2015 to 2026
5.1.2. Decorative DoorsDecorative doors are the main doors installed at the entrance of villas and also residential buildings. In addition to being used as the main doors, decorative steel doors can be used for majlis and residential buildings. Decorative steel doors secure the villa residents, have an esthetic appeal and control ingress into the villa premises. These doors are fabricated from steel sheets, plates, rods and sections. A variety of decorative steel doors are available in different sizes, shapes, designs, apart from accessories made of other metals, such as brass and aluminum.
Most steel decorative doors have some intricate design patterns attached to the steel rods, giving the door an esthetic appeal. These design patterns are usually painted in golden color and made from cast aluminum.
5.1.2.1. Demand-Side Analysis
5.1.2.1.1. Historical and Current Market Size
The market size71 for decorative doors has followed the development trends for villas that mainly drive its demand. The market size grew from 9,385sqm in 2001 (QAR9mn) to a peak of 38,192sqm (QAR61mn) in 2008, implying a CAGR of 22.2%
The slowdown of 2008–2009 led to subdued real estate development activity in the subsequent years that reduced the market size to 25,051sqm in 2011. Thereafter, the market recovered and is estimated to have reached 55,662sqm (QAR94mn) in 2015.
2015
QA
R p
er s
qm
2016E 2017F 2018F 2019F 2020F 2021F 2022F 2023F 2024F 2025F 2026F
0
200
400
600
800
1,000
1,200
1,400
1,600
1,800
2,000
Domestic price Import price
1,366 1,400 1,437 1,478 1,517 1,553 1,590 1,628 1,667 1,707 1,748 1,789
1,053 1,078 1,106 1,138 1,168 1,196 1,224 1,253 1,283 1,314 1,345 1,377
Source: Team Analysis, Primary Interviews
83,84 ITC Trademap Database
107Manufacture of Structural Metal Products
Chart 71. Qatar’s Decorative Doors Demand, 2001 to 2015
9 1214 18 21 24 28
38 33 29 2534 35 36
56
8 11 15 1823
27
39
61
49 4946
6064
69
94
Tho
usan
d s
qm
QA
R m
n
Market Size (Volume, 000's sqm) Market Size (Value, QAR mn)
0
10
20
30
40
50
60
70
80
90
100
2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015
0
15
30
45
60
75
90
105
120
Source: Team Analysis, ITC Trademap, MDPS Annual Bulletin of Building Permits and Competed Building Statistics
5.1.2.1.2. Market Size Segmentation by Products
Decorative door for villas is the largest segment accounting for 99.5% of the demand85. Villas constitute 45%of upcoming real estate developments in Qatar and have high consumption rates (sqm of decorative door consumed per 1,000sqm of built-up area) of decorative doors. Some high-end multi-story residential developments may also require decorative doors.
Chart 72. Decorative Doors Market Segmentation, 2015
99.56%Villas
0.44% Multi-storey residential
Decorative Door Market 55,662 sqm
Source: Team Analysis, MDPS Annual Bulletin of Building Permits and Competed Building Statistics, Primary Interviews
5.1.2.1.3. Demand Drivers
Demand for decorative steel doors is driven by requirements from villas and a few multi-story residential buildings. Other asset classes such as commercial developments, public buildings and industrial facilities are unlikely to require decorative doors. Civil contractors undertaking construction contracts comprise the customer segment. Architects and interior designers who design decorative doors are the key influencers.
5.1.2.1.4. Demand Forecast
The decline in oil prices in 2014 and 2015 is likely to affect the development of new villa projects that are either planned or underway. The market size is estimated to have reduced by 37.4% from 55,662sqm in 2015 to 34,845sqm in 2016.
Going forward, the decorative doors market is expected to grow from 34,845sqm in 2016 to an estimated 39,362sqm in 202686, registering a CAGR of 1.2%. In value terms, the market would grow at a CAGR of 3.7% from QAR60mn in 2016 to reach QAR86mn in 2026.
85, 86 Team Analysis
108 Manufacture of Structural Metal Products
Chart 73. Qatar’s Decorative Doors Demand Forecast, 2015 to 2026
Market Size (Volume, 000's sqm) Market Size (Value, QAR mn)
Tho
usan
d s
qm
QA
R m
n
0
10
20
30
40
50
60
0
10
20
30
40
50
60
70
80
90
100
2015 2016e 2017F 2018F 2019F 2020F 2021F 2022F 2023F 2024F 2025F 2026F
56
35 34 35 36 36 37 38 38 39 39 39
94
60 60 6366
69 72 75 78 81 84 86
Source: Team Analysis, ITC Trademap, MDPS Annual Bulletin of Building Permits and Competed Building Statistics
5.1.2.2. Trade Analysis
5.1.2.2.1. Historical Trade Analysis
Imports: The analysis of historical import data87 from 2001 indicates that imports have grown as per the real estate development trends in Qatar. Imports increased from 1,509sqm in 2001 to 10,098sqm (QAR19.7mn) in 2008. Imports more than doubled to 21,300sqm (QAR29.5mn) in 2009, when due to slowdown, inexpensive imports were preferred over domestic production. Thereafter, imports fell during 2010 to 2014 and again gained preference (20,603sqm, QAR31.5mn) in 2015.
Chart 74. Qatar’s Decorative Doors Imports, 2001 to 2015
2002
1.8
2001
1.4
3
2003
3.2
2
2004
2.5
1
2005
6.7
4
2006
9.3
8
2007
11.9
6
2008
19.7
10
2009
29.5
21
2010
24.5
14
2011
28.4
14
2012
25.9
13
2013
23.4
11
2014
29.1
13
2015
31.5
21
Tho
usan
d s
qm
Import Volume Import Value
QA
R m
n
0
5
10
15
20
25
0
5
10
15
20
25
30
35
Source: ITC Trademap, Team Analysis
Exports: The analysis of historical export88 data indicates that exports have been very irregular and very small as compared to the domestic production. During 2001 and 2015, annual exports averaged at 93sqm of decorative doors.
87, 88 ITC Trademap
109Manufacture of Structural Metal Products
Chart 75. Qatar’s Decorative Doors Exports, 2001 to 2015
Tho
usan
d s
qm
Export Volume Export Value
QA
R m
n
2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015
0.08
0.43
0.11 0.120.06
0.28
0.02 0.03 0.040.02 0.01
0.02
0.08
0.25
0.21
0.44
0.10
0.32
0.04
0.00
0.05
0.10
0.15
0.20
0.25
0.30
0.35
0.40
0.45
0.50
0.00
0.05
0.10
0.15
0.20
0.25
0.30
0.35
0.40
0.45
0.50
0.09
Tho
usan
d s
qm
% s
hare
Domestic Sales Imports % Share of Imports
0
10
20
30
40
50
60
0
10
20
30
40
50
60
70
80
90
100
8 16 17 16 22 28 11 15 11 21 24 23 35
1
48
6
10
2114 14
1311 13
21
912
1418
2124
28
38
3329
25
34 35 36
56
16.1%12.8% 14.0%
7.8%20.0%
32.2%
21.6% 26.4%
65.4%
47.8%
57.0%
38.3%30.5%
35.4% 37.0%
2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015
Source: ITC Trademap, Team Analysis
5.1.2.2.2. Share of Imports in Domestic Consumption
The share of imports in Qatar’s decorative doors market grew from 16.1% in 2001 to 26.4% in 200889. After the global economic crisis of 2008–2009, the share of imports further grew to reach 57% to 65.4% during 2009 and 2011, due to a preference for inexpensive imports. As the economy recovered, the share of imports reduced in 2012 to 2014 and reached 37% in 2015. On an average, during 2001 and 2015, 34.3% of the market was serviced by imports.
Chart 76. Qatar’s Decorative Doors Imports Vs Domestic Sales, 2001 to 2015
Source: Team Analysis, ITC Trademap
5.1.2.2.3. Assessment of Export Opportunities
Primary interviews with architectural steel fabrication units indicate that, due to the high cost of operations, Qatar’s production is not cost competitive and hence architectural steel fabrication units do not consider the export of decorative doors an attractive opportunity. Due to high salaries, rents and cost of raw material, production cost in Qatar is higher than in other countries in the GCC region. The analysis of export data90 indicates that during 2001 and 2015, the exports of decorative doors were only 0.52% of domestic production.
89,90 ITC Trademap
110 Manufacture of Structural Metal Products
5.1.2.2.4 Trade Forecast
Imports: The import forecast of decorative doors indicates that about 34.3% of the market requirements (in quantity terms) will be met by imports91. Primary interviews indicate that imports are about 10% to 20% cheaper than domestic production. Imports are likely to range from 11,947sqm in 2016 to 13,495sqm in 2026.
Chart 77. Qatar’s Decorative Doors Import Forecast, 2015 to 2026
Domestic Sales Imports % Share of Imports
Tho
usan
d s
qm
% s
hare
0
10
20
30
40
50
60
0
10
20
30
40
50
60
70
80
90
100
35 23 22 23 23 24 24 25 25 25 26 26
21
12 12 12 12 12 13 13 13 13 13 13
56
35 34 35 36 36 37 38 38 39 39 39
37.0% 34.3% 34.3% 34.3%
2015 2016E 2017F 2018F 2019F 2020F 2021F 2022F 2023F 2024F 2025F 2026F
Source: Team Analysis, ITC Trademap
Exports: The export forecast of decorative doors indicates that exports may have a minor opportunity as only 0.52% domestic production may be exported, subject to rare opportunities, e.g., Qatari customer choosing to build a villa in the KSA and sourcing
from Qatar-based fabricators92. Exports are likely to range from 118sqm in 2016 to 133sqm in 2026.
Chart 78. Qatar’s Decorative Doors Export Forecast, 2015 to 2026
Tho
usan
d s
qm
Domestic Sales Exports Exports as % of domestic production
2015 2016E 2017F 2018F 2019F 2020F 2021F 2022F 2023F 2024F 2025F 2026F
35 23 22 23 23 24 24 25 25 25 26 26
0.04
0.12 0.12 0.12 0.12 0.12 0.13 0.13 0.13 0.13 0.13 0.13
0.1%
0.52% 0.52% 0.52% 0.52% 0.52% 0.52% 0.52% 0.52% 0.52% 0.52% 0.52%
0
5
10
15
20
25
30
35
40
45
50%
sha
re
0.0%
0.5%
1.0%
1.5%
2.0%
2.5%
3.0%
3.5%
4.0%
4.5%
5.0%
Source: Team Analysis, ITC Trademap
91 Team Analysis92 Primary Interviews
111Manufacture of Structural Metal Products
5.1.2.3. Pricing Analysis
The selling prices of decorative doors are quoted on the basis of per sqm and vary as per the size, design, color, intricate decorative features and other specifications. Currently, the 2016 domestic prices93 for decorative doors are in the range of QAR1,000 to QAR2,500 per sqm (average of QAR1,800 per sqm). On an average, imports are 13% cheaper than domestic production. Considering the inflation rates in Qatar, average prices are expected to reach QAR2,301 per sqm for domestic production and QAR1,999 per sqm for imports in 2026.
Chart 79. Qatar’s Decorative Doors Selling Prices Forecast, 2015 to 2026
Source: Team Analysis, Primary Interviews
2015
QA
R p
er s
qm
2016E 2017F 2018F 2019F 2020F 2021F 2022F 2023F 2024F 2025F 2026F
Domestic price Import price
0
200
400
600
800
1,000
1,200
1,400
1,600
1,800
2,000
2,200
2,400
1,770 1,800 1,848 1,900 1,950 1,997 2,044 2,093 2,143 2,194 2,247 2,301
1,527 1,564 1,606 1,651 1,694 1,735 1,776 1,819 1,862 1,907 1,952 1,999
5.1.3. Steel Flush DoorsSteel flush doors are used in key areas, such as fire escape staircase and lift lobby, and service areas, such as electricity rooms and other utility chambers. These are made from steel sheets, plates and angles, and are usually painted in desired color. Some doors can be fitted with fixed glass panels.
Based on the requirement, steel flush doors can be fire-rated for fire escape staircases and non-fire-rated for other purposes.
5.1.3.1. Demand-Side analysis
5.1.3.1.1. Historical and Current Market Size
The market size for steel flush doors has followed the development trends in commercial projects, multi-story residential developments followed by public buildings that are its key drivers. The market size grew from 8,053sqm in 2001 to a peak of 36,581sqm (QAR38.9mn) in 2008, at a CAGR of 24.1%. The slowdown of 2008–2009 led to subdued real estate development activity in the subsequent years that reduced the market size to 25,421sqm in 2010. Thereafter, the market recovered and is estimated to have reached 52,986sqm in 2015 (QAR47.2mn). Steel flush doors: fire-rated
93 Primary Interviews
112 Manufacture of Structural Metal Products
Chart 80. Qatar’s Steel Flush Doors Demand, 2001 to 2015
5.1.3.1.2. Market Size Segmentation by Products
Commercial buildings (44%) followed by multi-story residential buildings (35%) are the leading segments for steel flush doors94. Public buildings (9%), industrial facilities (7%) and other buildings (5%) have a minor share of the market.
Primary interviews with architectural steel fabrication units indicate that 75% of the demand (in sqm) is for fire-rated doors, while the rest is for non-fire-rated doors.
5.1.3.1.3. Demand Drivers
Demand for steel flush doors is driven by requirements from multi-story residential buildings, commercial buildings, public buildings and a few industrial developments. Civil contractors undertaking construction contracts comprise the customer segment. Architects and interior designers who design buildings are the key influencers.
5.1.3.1.4. Demand Forecast
The decline in oil prices in 2014 and 2015 is likely to affect the development of new real estate projects that are either planned or underway. The market size is estimated to have reduced by 40.0% from 52,986sqm in 2015 to 31,774sqm in 2016.
Going forward, the steel flush doors market is expected to grow from 31,774sqm in 2016 to an estimated 35,893sqm in 2026, implying a CAGR of 1.2%. In value terms, the market would grow at a CAGR of 3.7% from QAR29mn in 2016 to reach QAR41.9mn in 2026.
Chart 81. Steel Flush Doors Market Segmentation, 2015
Market Size (Volume, 000's sqm) Market Size (Value, QAR mn)
2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015
Tho
usan
d s
qm
QA
R m
n
8
4.4
10
5.9
11
7.5
13
9.1
16
12.1
18
12.5
13
13.3
37
38.9
34
29.5
25
24.5
31
31.7
31
32.3
32
36.2
33
38.6
53
47.2
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
0
5
10
15
20
25
30
35
40
45
50
Source: Team Analysis, ITC Trademap, MDPS Annual Bulletin of Building Permits and Competed Building Statistics
5% Others
44% Commercial
7% Industrial
35%Multi-storey residential
9%Public buildings
Industrial Others
Multi-storey residential Public buildings Commercial
Steel Flush Doors Market
52,986 sqm
Source: Team Analysis, MDPS Annual Bulletin of Building Permits and Competed Building Statistics, Primary Interviews
94 Team Analysis
113Manufacture of Structural Metal Products
Chart 82: Qatar’s Steel Flush Doors Demand Forecast, 2015 to 2026
Tho
usan
d s
qm
Market Size (Volume, 000's sqm) Market Size (Value, QAR mn)
2015 2016E 2017F 2018F 2019F 2020F 2021F 2022F 2023F 2024F 2025F 2026F
QA
R m
n
53
47.2
32
29.0
31
29.1
32
30.4
32
32.1
33
33.6
34
35.1
34
36.5
35
37.8
35
39.2
36
40.6
36
41.9
0
5
10
15
20
25
30
35
40
45
50
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
Source: Team Analysis, ITC Trademap, MDPS Annual Bulletin of Building Permits and Competed Building Statistics
5.1.3.3. Trade Analysis
5.1.3.3.1. Historical Trade Analysis
Imports: The analysis of historical import data95 from 2001 indicates that imports have grown as per the real estate development trends in Qatar. Imports increased from 2,896sqm in 2001 to 19,380sqm (QAR19.7mn) in 2008. Imports more than doubled to 40,880sqm (QAR29.5mn) in 2009, when due to slowdown, inexpensive imports were preferred over domestic production. Thenceforth, imports fell during 2010 and 2014 and again gained preference (39,541sqm, QAR31.5mn) in 2015.
Chart 83. Qatar’s Steel Flush Doors Imports, 2001 to 2015
Import Volume Import Value
2001 2002 2003
2
2004
1
2005
4
2006
8
2007
6
2008
10
2009
21
2010
14
2011
14
2012
13
2013
11
2014
13
2015
21
Tho
usan
d s
qm
QA
R m
n
0
5
10
15
20
25
0
5
10
15
20
25
30
35
1.4 1.83.2 2.5
6.7
9.3
11.9
19.7
29.5
24.5
28.425.9
23.4
29.131.5
Source: ITC Trademap, Team Analysis
95 ITC Trademap
114 Manufacture of Structural Metal Products
Exports: The analysis of historical export data96 indicates that exports have been very irregular and very small as compared to the domestic production. During 2001 and 2015, annual exports averaged at 179sqm of steel flush doors.
Chart 84. Qatar’s Steel Flush Doors Exports, 2001 to 2015
2001 2010
0.83
2002
0.17
0.02
2003
0.03
2004
0.04
2005
0.02
2006
0.01
2007
0.14
0.02
2008
0.08
2009
0.16
0.25
2011
0.22
0.21
2012
0.23
0.44
2013
0.11
0.10
2014
0.54
0.32
2015
0.04
Tho
usan
d s
qm
Export Volume Exports Value
QA
R m
n
0
0.10
0.20
0.30
0.40
0.50
0.60
0.70
0.80
0.90
0
0.05
0.10
0.15
0.20
0.25
0.30
0.35
0.40
0.45
0.50
Source: ITC Trademap, Team Analysis
5.1.3.3.2. Share of Imports in Domestic Consumption
The share of imports in Qatar’s steel flush doors market grew from 36.0% in 2001 to 53.0% in 200897. After the global economic crisis of 2008–2009, the share of imports further grew to reach 90% to 100% during 2009 and 2011, due to a preference for inexpensive imports. As the economy recovered, the share of imports reduced between 2012 and 2014 and reached 74.6% in 2015. On an average, during 2001 and 2015, 74.4% of the market was serviced by imports.
Chart 85. Qatar’s Steel Flush Doors Imports Vs Domestic Sales, 2001 to 2015
Tho
usan
d s
qm
Domestic Sales Imports % Share of Imports
% s
hare
0%
20%
40%
60%
80%
100%
120%
0
10
20
30
40
50
60
70
2004
13
20.8%10
2001
8
36.0%
53
2002
10
29.5%
7
3
2003
11
35.5%
7
4
2005
16
51.0%
8
8
2006
18
79.3%
4
15
2007
13
88.1%
2
11
2008
37
53.0%
17
19
2009
34
100.0%
34
2010
25
100.0%
25
2011
31
89.7%
3
27
2012
31
80.7%
6
25
2013
32
64.2%
11
21
2014
33
74.5%
8
24
2015
53
74.6%
13
40
Source: Team Analysis, ITC Trademap
96, 97 ITC Trademap
115Manufacture of Structural Metal Products
5.1.3.3.3. Assessment of Export Opportunities
Primary interviews with architectural steel fabrication units indicate that, due to the high cost of operations, Qatar’s production is not cost competitive and hence architectural steel fabrication units do not consider the export of steel flush doors an attractive opportunity. Due to high salaries, rents and cost of raw material, production cost in Qatar is higher than in other countries in the GCC region. The analysis of export data indicates that during 2001 and 201598, exports of steel flush doors were only 2.6% of domestic production.
5.1.3.3.4. Trade Forecast
Imports: The import forecast of steel flush doors indicates that about 74.4% of the market requirements (in quantity terms) will be met by imports. Primary interviews indicate that imports are about 25% to 40% cheaper than domestic production. Imports are likely to range from 23,638sqm in 2016 to 26,702sqm in 2026.
Chart 86. Qatar’s Steel Flush Doors Import Forecast, 2015 to 2026
2015 2016E 2017F 2018F 2019F 2020F 2021F 2022F 2023F 2024F 2025F 2026F
Domestic Sales Imports % Share of Imports
% s
hare
Tho
usan
d s
qm
13.4
39.5
8.1
23.6
7.9
23.1
8.1
23.5
8.3
24.1
8.5
24.7
8.7
25.1
8.8
25.5
8.9
25.9
9.0
26.2
9.1
26.5
9.2
26.7
53
32 31 32 32 33 34 34 35 35 36 36
74.4% 74.4% 74.4%
0
10
20
30
40
50
60
70
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Source: Team Analysis, ITC Trademap
Exports: The export forecast of steel flush doors indicates that exports may have a minor opportunity as only 2.6% domestic production may be exported99. Exports are most likely to be limited to rare opportunities, e.g., Qatari civil contractors winning international projects and planning to source from Qatar-based fabricators. Exports are likely to range from 209sqm in 2016 to 236sqm in 2026.
Chart 87. Qatar’s Steel Flush Doors Export Forecast, 2015 to 2026
Domestic Sales Exports Exports as % of domestic production
13.4
0.07
0.5%
2015
8.1
0.21
2.6%
2016E
7.9
0.20
2.6%
2017F
8.1
0.21
2.6%
2018F
8.3
0.21
2.6%
2019F
8.5
0.22
2.6%
2020F
8.7
0.22
2.6%
2021F
8.8
0.23
2.6%
2022F
8.9
0.23
2.6%
2023F
9.0
0.23
2.6%
2024F
9.1
0.23
2.6%
2025F
9.2
0.24
2.6%
2026F
% s
hare
Tho
usan
d s
qm
0123456789
101112131415
0%
5%
10%
15%
20%
25%
30%
Source: Team Analysis, ITC Trademap
98 ITC Trademap 99 Team Analysis
116 Manufacture of Structural Metal Products
5.1.3.4. Pricing Analysis
The selling prices of steel flush doors are quoted on the basis of per sqm and vary as per the size, design, color, number of hours of fire resistance offered and other specifications. Currently, the 2016 domestic prices100 for steel flush doors are in the range of QAR1,000 and QAR1,500 per sqm (average of QAR1,200 per sqm). On an average, imports are 32% cheaper than domestic production. Considering the inflation rates in Qatar, average prices are expected to reach QAR1,534 per sqm for domestic production and QAR1,042 per sqm for imports in 2026.
Chart 88. Qatar’s Steel Flush Doors Selling Prices Forecast, 2015 to 2026
Source: Team Analysis, Primary Interviews
QA
R p
er s
qm
Domestic price Import price
0
200
400
600
800
1,000
1,200
1,400
1,600
1,800
2015
1,171
796
2016E
1,200
815
2017F
1,232
837
2018F
1,267
860
2019F
1,300
883
2020F
1,331
904
2021F
1,363
926
2022F
1,396
948
2023F
1,429
970
2024F
1,463
993
2025F
1,498
1,017
2026F
1,534
1,042
5.1.4. Rolling ShuttersRolling shutters are used in commercial premises (shops) and industrial buildings, such as factory sheds and warehouses. They may also be used to control ingress into basements. Rolling shutters roll up and down around a steel pipe fixed at the top of the opening, and save space as compared to conventional vertically hung swing doors. These are made from steel sheets, profiles and pipes, and are usually painted in desired colors. In addition to being operated with the help of mechanical levers, these doors can be operated with electronic controls.
5.1.4.1 Demand-Side Analysis
5.1.4.1.1. Historical and Current Market Size
The market size for rolling shutters has followed the development trends in commercial projects and indusial developments, such as warehouses and factory sheds. The market size grew from 14,818sqm in 2001 to a peak of 62,690sqm (QAR46mn) in 2008, at a CAGR of 22.9%. The slowdown of 2008–2009 led to subdued real estate development activity in the subsequent years that reduced the market size to 41,007sqm in 2010. Thereafter, the market recovered and is estimated to have reached 84,611sqm in 2015 (QAR52mn).
100 Primary Interviews
117Manufacture of Structural Metal Products
Chart 89. Qatar’s Rolling Shutters Demand, 2001 to 2015
Tho
usan
d s
qm
Market Size (Volume, 000's sqm) Market Size (Value, QAR mn)
QA
R m
n
15
6
2001
17
7
2002
17
8
2003
20
10
2004
21
12
2005
23
10
2006
14
13
2007
63
46
2008
59
33
2009
41
27
2010
46
33
2011
49
36
2012
51
40
2013
52
43
2014
85
52
20150
10
20
30
40
50
60
70
80
90
100
0
5
10
15
20
25
30
35
40
45
50
55
60
Source: Team Analysis, ITC Trademap, MDPS Annual Bulletin of Building Permits and Competed Building Statistics
5.1.4.1.2. Market Size Segmentation by Products
Commercial development (shops and retail units) is the largest segment accounting for 83% of the demand followed by industrial units at 17%101.
5.1.4.1.3. Demand Drivers
Demand for rolling shutters is driven by requirements arising from commercial (shops and retail units) and industrial developments. Civil contractors undertaking construction contracts comprise the customer segment. Architects and interior designers are the key influencers.
5.1.4.1.4. Demand Forecast
The decline in oil prices in 2014 and 2015 is likely to affect the development of new real estate projects that are either planned or underway. The market size is estimated to have reduced by 40.0% from 84,611sqm in 2015 to 50,775sqm in 2016.
Going forward, the rolling shutter market is expected to grow from 50,775sqm in 2016 to an estimated 57,357sqm in 2026102, registering a CAGR of 1.2%. In value terms, the market would grow at a CAGR of 3.7% from QAR32mn in 2016 to reach QAR46mn in 2026.
17% Industrial
83%Commercial
Rolling ShutterMarket
84,661 sqm
Chart 90. Rolling Shutters Market Segmentation, 2015
Source: Team Analysis, MDPS Annual Bulletin of Building Permits and Competed Building Statistics, Primary Interviews
101,102 Team Analysis
118 Manufacture of Structural Metal Products
Chart 91. Qatar’s Rolling Shutters Demand Forecast, 2015 to 2026
Market Size (Volume, 000's sqm) Market Size (Value, QAR mn)
Tho
usan
d s
qm
QA
R m
n
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
0
10
20
30
40
50
60
70
80
90
2015 2016E 2017F 2018F 2019F 2020F 2021F 2022F 2023F 2024F 2025F 2026F
85 51 50 50 52 53 54 55 56 56 57 57
52
32 32 34 36 37 39 4042 43 45 46
Source: Team Analysis, ITC Trademap, MDPS Annual Bulletin of Building Permits and Competed Building Statistics
5.1.4.2. Trade Analysis
5.1.4.2.1. Historical Trade Analysis
Imports: The analysis of historical import data from 2001 indicates that imports have grown as per the real estate development trends in Qatar. Imports increased from 4,573sqm in 2001 to 30,600sqm (QAR22.0mn) in 2008. Imports more than doubled to 64,547sqm (QAR32.9mn) in 2009, when due to slowdown, inexpensive imports were preferred over domestic production. Thenceforth, imports fell during 2010 and 2014 and again gained preference (62,433sqm, QAR35.1mn) in 2015.
Chart 92. Qatar’s Rolling Shutters Imports, 2001 to 2015
2001
1.5
2002
2.0
2003
6
3.6
2004
4
2.8
2005
13
7.4
2006
23
10.4
2007
18
13.2
2008
31
22.0
2009
65
32.9
2010
42
27.3
2011
43
31.7
39
28.9
2012
32
26.2
2013
38
32.4
2014
62
35.1
2015
Import Volume Imports Value
Tho
usan
d s
qm
QA
R m
n
0
10
20
30
40
50
60
70
80
100
90
0
5
10
15
20
25
30
35
40
45
50
5 5
Source: ITC Trademap, Team Analysis
Exports: The analysis of historical export data indicates that exports have been very irregular and very small as compared to the domestic production. During 2001 and 2015, annual exports averaged at 282sqm of rolling shutters.
103 Primary Interviews
119Manufacture of Structural Metal Products
0.27 0.230.25
1.31
0.35 0.370.17
0.85
0.02 0.04 0.040.02 0.01 0.03
0.09
0.280.23
0.50
0.11
0.35
0.05
Tho
usan
d s
qm
Export Volume Export Value
QA
R m
n
2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015
0.00
0.10
0.20
0.30
0.40
0.50
0.60
0.00
0.20
0.40
0.60
0.80
1.00
1.20
1.40
Source: ITC Trademap, Team Analysis
5.1.4.2.2. Share of Imports in Domestic Consumption
The share of imports in Qatar’s rolling shutters market was in the range of 21% to 35% during 2001 and 2004. The market was entirely served by imports during 2006 and 2010 with the exception of 2008. Domestic players had small market shares during 2011 and 2014. On an average, during 2001 and 2015, 74.5% of the market was serviced by imports.
Chart 94. Qatar’s Rolling Shutters Imports Vs Domestic Sales, 2001 to 2015
Domestic Sales Imports % Share of Imports
Tho
usan
d s
qm
% s
hare
0%
20%
40%
60%
80%
100%
120%
2001
10
5
31%
2002
12
5
27%
2003
11
6
35%
2004
16
21%
2005
9
13
59%
2006
23
100%
2007
14
100%
2008
32
31
49%
2009
59
100%
2010
41
100%
2011
3
43
94%
2012
10
39
80%
2013
19
32
63%
2014
14
38
74%
2015
22
62
74%
0
10
20
30
40
50
60
70
80
90
100
Source: Team Analysis, ITC Trademap
5.1.4.2.3. Assessment of Export Opportunities
Primary interviews with architectural steel fabrication units indicate that, due to the high cost of operations, Qatar’s production is not cost competitive and hence architectural steel fabrication units do not consider the export of rolling shutters an attractive opportunity. Due to high salaries, rents and cost of raw material, production cost in Qatar is higher than in other countries in the GCC region. The analysis of export data indicates that during 2001 and 2015, exports of rolling shutters were only 2.6% of domestic production.
Chart 93. Qatar’s Rolling Shutters Exports, 2001 to 2015
120 Manufacture of Structural Metal Products
5.1.4.2.4. Trade Forecast
Imports: The import forecast of rolling shutters indicates that about 74.5% of the market requirements (in quantity terms) will be met by imports. Primary interviews indicate that imports are about 25% to 40% cheaper than domestic production. Imports are likely to range from 37,827sqm in 2016 to 42,730sqm in 2026.
Chart 95. Qatar’s Rolling Shutters Import Forecast, 2015 to 2026
% s
hare
Tho
usan
d s
qm
13 13 13 13 14 14 14 14 14 15 15
62
38 37 38 39 40 40 41 41 42 42 43
73.8% 74.5% 74.5% 74.5% 74.5% 74.5% 74.5% 74.5% 74.5% 74.5% 74.5% 74.5%
2015 2016E 2017F 2018F 2019F 2020F 2021F 2022F 2023F 2024F 2025F 2026F
Domestic Sales Imports % Share of Imports
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
0
10
20
30
40
50
60
70
80
90
100
22
0.1
0.5%
2015
13
0.3
2.6%
2016E
13
0.3
2.6%
2017f
13
0.3
2.6%
2018f
13
0.3
2.6%
2019f
14
0.4
2.6%
2020f
14
0.4
2.6%
2021f
14
0.4
2.6%
2022f
14
0.4
2.6%
2023f
14
0.4
2.6%
2024f
15
0.4
2.6%
2025f
15
0.4
2.6%
2026f
Tho
usan
d s
qm
% s
hare
Domestic Sales Exports Exports as % of domestic production
0%
5%
10%
15%
20%
25%
30%
02468
1012141618202224262830
Source: Team Analysis, ITC Trademap
Exports: The export forecast of rolling shutters indicates that exports may have a minor opportunity as only 2.6% domestic production may be exported. Exports are most likely to be limited to rare opportunities, e.g., Qatari civil contractors winning international projects and planning to source103 from Qatar-based fabricators. Exports are likely to range from 339sqm in 2016 to 383sqm in 2026.
Chart 96. Qatar’s Rolling Shutters Export Forecast, 2015 to 2026
Source: Team Analysis, ITC Trademap
121Manufacture of Structural Metal Products
5.1.4.3. Pricing Analysis
The selling prices of rolling shutters are quoted on the basis of per sqm and vary as per the size, color and other specifications. Currently, the 2016 domestic prices for rolling shutters are in the range of QAR600 and QAR1,100 per sqm (average of QAR800 per sqm). On an average, imports are 28% cheaper than domestic production. Considering the inflation rates in Qatar, average prices are expected to reach QAR1,022 per sqm for domestic production and QAR736 per sqm for imports in 2026.
Chart 97. Qatar’s Rolling Shutters Fabrication Selling Prices Forecast, 2015 to 2026
QA
R p
er s
qm
Domestic price Import price
0
200
400
600
800
1,000
1,200
2015
781
563
2016e
800
576
2017F
821
591
2018F
845
608
2019F
867
624
2020F
887
639
2021F
909
654
2022F
930
670
2023F
953
686
2024F
975
702
2025F
999
719
2026F
1,022
736
Source: Team Analysis, Primary Interviews
5.1.4.3.1. Trade by Source and Destination (All types of doors)
Imports: The analysis of steel doors (all types of steel doors) total imports quantity, during the period 2010 to 2015, amounting to 38,745MT indicates that the UAE (37% share), China (22% share) and the KSA (9% share) are the major sources of imports.
Chart 98. Key Sources of Imports (All Types of Steel Doors), 2010 to 2015
UAE
China
Saudi Arabia
EgyptUSA
Rest of the World
2010 2011 2012 2013 2014 20150%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Source: ITC Trademap, Team Analysis
122 Manufacture of Structural Metal Products
The UAE has been the leading source of imports of steel doors into Qatar, accounting for 45.5% of all imports in 2015. China’s share of imports reduced from 2010 to 2014 and increased in 2015. Saudi Arabia, Egypt and the USA had consistently had small shares in the import market during 2010 to 2015. From 2012 to 2015, Egypt’s share increased, while that of Saudi Arabia decreased.
Exports: The analysis of steel doors (all types of steel doors) total exports quantity, during the period 2010 to 2015, amounting to 474MT indicates that the KSA (49% share), Kuwait (23% share) and the UAE (21% share) are the major destination for exports.
Chart 99. Key Destinations of Exports (All Types of Steel Doors), 2010 to 2015
Saudi Arabia Kuwait
UAE
TurkeyChina
Rest of the World
2010 2011 2012 2013 2014 2015
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Source: ITC Trademap, Team Analysis
The small volume of exports from Qatar from 2010 to 2015 were to nearby countries, such as Saudi Arabia, Kuwait and the UAE. Exports to Turkey reported in 2015 are likely to be on account of the return of imported goods.
5.1.5. Staircase RailingsStaircase railings are installed along staircases and offer support to people as they climb up and down the staircase. These are made from steel rods, sections, pipes and can be combined with other materials such as glass and wood. Steel staircase can be fabricated in a variety of options in terms of sizes, shapes, designs, glass panels and accessories of other metals, such as brass and aluminum. Some staircase railings have intricate design patterns attached to the steel rods, giving it an esthetic appeal. These design patterns are usually painted in golden color and made from cast aluminum.
5.1.5.1. Demand-Side Analysis
5.1.5.1.1. Historical and Current Market Size
The market size for staircase railing has followed the real estate development trends as this product is used in all types of real estate asset classes. The market size grew from 49,286 linear meter in 2001 to a peak of 204,826 linear meter (QAR176mn) in 2008, at a CAGR of 20.0%. The slowdown of 2008–2009 led to subdued real estate development activity in the subsequent years that reduced the market size to 143,125 linear meter in 2011. Thereafter, the market recovered and is estimated to have reached 302,996 linear meter in 2015 (QAR253mn).
123Manufacture of Structural Metal Products
Chart 100. Qatar’s Staircase Railings Demand, 2001 to 2015
60 75 92110
129 138
205177
152 143181 187 190
303
2327
3647
65
87
117
176
143
89
111126
165 170
253
Tho
usan
d li
near
met
er
Market Size (Volume, 000's linear meter) Market Size (Value, QAR mn)
QA
R m
n
2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015
020406080
100120140160180200220240260280300320
020406080100120140160180200220240260280300320
Source: Team Analysis, ITC Trademap, MDPS Annual Bulletin of Building Permits and Competed Building Statistics
5.1.5.1.2. Market Size Segmentation by Products
Staircase railings for villas is the largest segment accounting for 81.9% of the demand. Villas constitute 45% of upcoming real estate developments in Qatar and have high consumption rates (linear meter of staircase railing consumed per 1,000sqm of built-up area) of staircase railings. Multi-story residential and commercial developments are the next important segments having 13.5% and 2.6% of the market share, respectively.
Chart 101. Staircase Railings Market Segmentation, 2015
2.6% Commercial
0.5% Public buildings
13.5% Multi-storey residential
0.6% Others
1% Industrial
81.9%Villas
Commercial Industrial Others
Villas Multi-storey residential Public buildings
Staircase Handrail Market
302,996 linear meter
Source: Team Analysis, MDPS Annual Bulletin of Building Permits and Competed Building Statistics, Primary Interviews
5.1.5.1.3. Demand Drivers
Demand for staircase railings is driven by requirements arising from real estate development projects that include various types of developments, such as villas, multi-story residential buildings, commercial developments, public buildings and industrial facilities. Civil contractors undertaking construction contracts comprise the customer segment. Architects and interior designers who design staircase railings are the key influencers.
5.1.5.1.4. Demand Forecast
The decline in oil prices in 2014 and 2015 is likely to affect the development of new real estate projects that are either planned or underway. The market size is estimated to have reduced by 40.0% from 302,996 linear meter in 2015 to 185,661 linear meter in 2016.
Going forward, the staircase railing market125 is expected to grow from 185,661 linear meter in 2016 to an estimated 209,727 linear meter in 2026, registering a CAGR of 1.2%. In value terms, the market would grow at a CAGR of 3.7% from QAR160mn in 2016 to reach QAR231mn in 2026.
124 Manufacture of Structural Metal Products
Chart 102. Qatar’s Staircase Railings Demand Forecast, 2016 to 2026
303
253
2015
186
160
2016E
181
160
2017F
184
167
2018F
190
177
2019F
194
185
2020F
197
193
2021F
201
201
2022F
203
208
2023F
206
216
2024F
208
223
2025F
210
231
2026F
QA
R m
n
Tho
usan
d li
near
met
er
Market Size (Volume, 000's linear meter) Market Size (Value, QAR mn)
30507090
110130150170190210230250270290310330
020406080100120140160180200220240260280300
Source: Team Analysis, ITC Trademap, MDPS Annual Bulletin of Building Permits and Competed Building Statistics
5.1.5.2. Trade Analysis
5.1.5.2.1. Historical Trade Analysis
Imports: The analysis of historical import data from 2001 indicates that imports have grown as per the real estate development trends in Qatar, over the 2001 and 2007 period. Imports increased from 2,389 linear meter in 2001 to 22,664 linear meter (QAR35mn) in 2007. Thereon, imports have been irregular, rising and falling in the alternate years to reach 49,623 linear meter (QAR30.2mn) in 2015.
Chart 103. Qatar’s Staircase Railings Imports, 2001 to 2015
2.5
2001
1.6
2002
5
4.0
2003
16
9.5
2004
18
15.0
2005
8
13.2
2006
23
35.0
2007
13
15.5
2008
4
5.3
2009
70
24.7
2010
15
9.4
2011
55
24.4
2012
12
19.1
2013
24
26.7
2014
50
30.2
2015
Tho
usan
d li
near
met
er
Import Volume Imports Value
QA
R m
n
0
10
20
30
40
50
60
70
80
0
5
10
15
20
25
30
35
40
Source: ITC Trademap, Team Analysis
125Manufacture of Structural Metal Products
Exports: Analysis of historical export data indicates that exports have been highly irregular and marginal as compared to the domestic production. In 2001 and 2015, the annual exports averaged at 550 linear meter of staircase railing.
Chart 104. Qatar’s Staircase Railings Exports, 2001 to 2015
Tho
usan
d li
near
met
er
Export Volumet Exports Value
QA
R m
n
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
0.0
0.2
0.4
0.6
0.8
1.0
1.2
2008 20142001
0.0
2002
0.02
2003
0.02
2004
0.10
2005
0.10
2006
0.0
2007
0.49
0.26
2009
0.08
2010
3.89
1.10
2011
1.18
0.36
2012
0.60
0.26
2013
0.74
0.10
2015
0.68
0.08
Source: ITC Trademap, Team Analysis
5.1.5.2.2. Trade by Source and Destination
Imports: The analysis of the steel staircase railing imports amounting to 14,641MT from 2010 to 2015 indicates that the UAE (62% share), Germany (15% share) and China (5% share) are the major sources of imports.
Chart 105. Key Sources of Staircase Railings Imports, 2010 to 2015
UAE
Germany
China
Turkey
HungaryRest of the World
2010 2011 2012 2013 2014 2015
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Source: ITC Trademap, Team Analysis
Products from the UAE accounted for over 90% of imports into Qatar in 2010. However, its share fell steadily to reach 39% in 2015. German, Chinese and Turkish products saw an increase in their share during 2013 to 2015. From 2012 to 2015, the share of the rest of the world in imports into Qatar increased, which indicates that the sources of imports diversified during this period.
126 Manufacture of Structural Metal Products
Exports: The analysis of steel staircase exports from Qatar amounting to 461MT from 2010 to 2015 indicates that Algeria (43% share), the UAE (23% share) and the KSA (11% share) are the major destinations for exports.
Chart 106. Key Destinations of Staircase Railings Exports, 2010 to 2015
Algeria UAE
Saudi Arabia
Germany
KuwaitRest of the World
2010 2011 2012 2013 2014 2015
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
7516
18%
2004
47
2
5%
2001
57
2
4%
2002
70
5
7%
2003
9318
16%
2005
1218
6%
2006
115
23
16%
2007
192
13
6%
2008
172
4
2%
2009
82
70
46%
2010
128
15
10%
2011
126
55
30%
2012
175
12
6%
2013
166
24
13%
2014
253
50
16%
2015
Tho
usan
d li
near
met
er
Domestic Sales Imports % Share of Imports
% s
hare
0
25
50
75
100
125
150
175
200
225
250
275
300
325
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Source: ITC Trademap, Team Analysis
Qatar’s exports quantity had been small and focused on countries such as the UAE, Saudi Arabia and Kuwait during 2011 to 2013. Exports to Germany are likely to be the return of imported goods as a sizable quantity was imported from Germany in 2015.
5.1.5.2.3. Share of Imports in Domestic Consumption
Historically, the share of imports in Qatar’s steel staircase railing market has been lower than that of the domestic players across 2001 and 2015. On average, in 2001 and 2015, 14.5% of the market was serviced by imports. Due to preference for inexpensive imports, the share of imports increased to 46% and 26% in 2010 and 2015, respectively.
Chart 107. Qatar’s Staircase Railings Imports Vs Domestic Sales, 2001 to 2015
Source: Team Analysis, ITC Trademap
127Manufacture of Structural Metal Products
5.1.5.2.4. Assessment of Export Opportunities
Primary interviews with architectural steel fabrication units indicate that due to high cost of operations, Qatar’s production is not cost competitive and hence, architectural steel fabrication units do not consider export of steel staircase railing an attractive opportunity. Due to high cost of salaries, rent and raw material, production cost in Qatar is high as compared to other countries in the GCC region. Analysis of export data indicates that during 2001 and 2015, exports of steel staircase railing constituted only 0.44% of the domestic production.
5.1.5.2.5. Trade Forecast
Imports: The import forecast of steel staircase railings indicates that about 14.5% of the market requirements (in quantity terms) will be met by imports. Primary interviews indicate that imports are about 25% to 35% cheaper than domestic production. Imports are likely to range from 26,851 linear meter in 2016 to 30,332 linear meter in 2026. Imports would have a minor share because, as compared to other architectural steel fabrication products, staircase railings require substantial amount of site-specific working (e.g., angle of inclination, curve, height, etc.), due to which customers prefer to rely on domestic players.
Chart 108. Qatar’s Staircase Railings Import Forecast, 2015 to 2026
253
50
16.4%
159
27
14.5%
26
14.5%
158
27
14.5%
162
27
14.5%
166
28
14.5%
169
29
14.5%
172
29
14.5%
174
29
14.5%
176
30
14.5%
178
30
14.5%
155179
30
14.5%
2015 2016E 2017F 2018F 2019F 2020F 2021F 2022F 2023F 2024F 2025F 2026F
Domestic Sales Imports % Share of Imports%
sha
re
Tho
usan
d li
near
met
er
0
25
50
75
100
125
150
175
200
225
250
275
300
325
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Source: Team Analysis, ITC Trademap
Exports: The ten-year export forecast of steel staircase railings indicates that exports may have a minor opportunity as only 0.44% domestic production may be exported. Exports are most likely to be limited to rare opportunities, e.g., Qatari civil contractors winning international projects and planning to source from Qatar-based fabricators, or a Qatari customer choosing to build a villa in the KSA and procuring from Qatar-based fabricators. Exports are likely to range from 696 linear meter in 2016 to 786 linear meter in 2026.
128 Manufacture of Structural Metal Products
Chart 109. Qatar’s Staircase Railings Export Forecast, 2015 to 2026
162, 163 Primary Interviews164 WEO
253
0.68
0.3%
2015
159
0.70
0.4%
2016E
155
0.68
0.4%
2017F
158
0.69
0.4%
2018F
162
0.71
0.4%
2019F
166
0.73
0.4%
2020F
169
0.74
0.4%
2021F
172
0.75
0.4%
2022F
174
0.76
0.4%
2023F
176
0.77
0.4%
2024F
178
0.78
0.4%
2025F
179
0.79
0.4%
2026F
Domestic Sales Exports Exports as % of domestic production
% s
hare
Tho
usan
d li
near
met
er
0
25
50
75
100
125
150
175
200
225
250
275
300
325
0%
5%
10%
15%
20%
25%
30%
QA
R p
er li
near
met
re
Domestic price Import price
0
2015
878
609
2016E
900
624
2017F
924
640
2018F
950
659
2019F
975
676
2020F
998
692
2021F
1,022
709
2022F
1,047
726
2023F
1,072
743
2024F
1,097
761
2025F
1,123
779
2026F
1,150
797
200
400
600
800
1,000
1,200
1,400
Source: Team Analysis, ITC Trademap
5.1.5.3. Pricing Analysis
Selling prices for steel staircase railings are quoted on per linear meter basis and vary as per the design, size, color, painted steel or stainless steel, use of other materials such as glass panels, and other specifications. Currently, the 2016 domestic prices for staircase railings are in the range of QAR700 to QAR2,000 per linear meter (average of QAR900 per linear meter). On average, imports are 30.7% cheaper as compared to domestic production. Considering the inflation rates in Qatar, average prices are expected to reach QAR1,150 per linear meter in 2026, for domestic production and QAR797 per linear meter for imports.
Chart 110. Qatar’s Staircase Railings Selling Prices Forecast, 2015 to 2026
Source: Team Analysis, Primary Interviews
129Manufacture of Structural Metal Products
5.1.6. Grills and FencingGrills and fences are used along boundary walls of real estate developments and along road medians and edges of footpaths. These are fixed to the wall or to the ground and prevent unauthorized access into the spaces that they enclose. Grills and fences are made from steel rods, sections, steel pipes and can be fabricated in a variety of shapes, sizes, designs, colors and patterns.
5.1.6.1. Demand-Side Analysis
5.1.6.1.1. Historical and Current Market Size
The market size for grills and fencing has followed the real estate development trends as this product is used in all types of projects. Infrastructure development is also a key driver for grills and fencing.
The market size grew from 178,522sqm in 2001 to a peak of 739,395sqm (QAR225mn) in 2008, at a CAGR of 20.2%. The slowdown of 2008–2009 led to subdued real estate development activity in the subsequent years that reduced the market size to 516,389sqm in 2011. Thereon, the market recovered and is estimated to have reached 973,942sqm in 2015 (QAR370mn).
Chart 111. Qatar’s Grills and Fencing Demand, 2001 to 2015
739
225
2008
694
250
2014
20
2001
28
2002
279
45
2003
330
64
2004
392
91
2005
454
110
2006
503
127
2007
648
174
2009
563
166
2010
516
177
2011
660
114
2012
682
227
2013
974
370
2015
Tho
usan
d s
qm
Market Size (Volume, sqm) Market Size (Value, QAR mn)
0
100
200
300
400
500
600
700
800
900
1,000
1,100
1,200
0
50
100
150
200
250
300
350
400
QA
R m
n
Source: Team Analysis, ITC Trademap, MDPS Annual Bulletin of Building Permits and Competed Building Statistics
130 Manufacture of Structural Metal Products
5.1.6.1.2. Market Size Segmentation by Products
Infrastructure sector projects such as new road development and widening of existing roads form the largest segment (67%) followed by villas, which have a market share of 26.8%. Other asset classes such as multi-story residential and commercial buildings have small shares in the market.
Chart 112. Grills and Fencing Market Segmentation, 2015
66.7% Infrastructure
1.3% Industrial
1.7% Others
26.8%Villas
2.6%Multi-storey residential
1.0% Public buildings0.9% Commercial
Commercial Industrial Others Infrastructure
Villas Multi-storey residential Public buildings
Grills and fencing market
973,942 sqm
5.1.6.1.3. Demand Drivers
Demand for grills and fences is driven by real estate developments and road development projects. The customer segment comprises civil contractors undertaking construction contracts for real estate projects and infrastructure developments. Key influencers include engineers who design road projects and architects who design buildings.
5.1.6.1.4. Demand Forecast
The decline in oil prices in 2014 and 2015 is likely to affect the development of new real estate and infrastructure projects that are either planned or underway. The market size is estimated to have reduced by 30.5% from 973,942sqm in 2015 to 677,039sqm in 2016.
Going ahead, the grills and fencing market is expected to grow from 677,039sqm in 2016 to an estimated 764,800 linear meter in 2026, registering a CAGR of 1.2%. In value terms, the market would grow at a CAGR of 3.7% from QAR256mn to reach QAR370mn in 2026.
Source: Team Analysis, MDPS Annual Bulletin of Building Permits and Competed Building Statistics, Primary Interviews
Chart 113. Qatar’s Grills and Fencing Demand Forecast, 2015 to 2026
Tho
usan
d s
qm
Market Size (Volume, sqm) Market Size (Value, QAR mn)
0
100
200
300
400
500
600
700
800
900
1,000
1,100
1,200
QA
R m
n
0
50
100
150
200
250
300
350
400
450
500
974
370
2015
677
256
2016E
661
257
2017F
673
269
2018F
692
283
2019F
707
297
2020F
720
309
2021F
732
322
2022F
741
334
2023F
750
346
2024F
759
358
2025F
765
370
2026F
Source: Team Analysis, ITC Trademap, MDPS Annual Bulletin of Building Permits and Competed Building Statistics
131Manufacture of Structural Metal Products
5.1.6.2. Trade Analysis
5.1.6.2.1. Historical Trade Analysis
Imports: The analysis of historical import data from 2001 indicates that imports have grown as per the real estate development trends in Qatar. Imports increased from 171,382sqm in 2001 to 335,527sqm (QAR75mn) in 2008. Thereafter, imports paced up to 492,455sqm (QAR119mn) in 2009, when due to slowdown, inexpensive imports were preferred over domestic production. Further, imports fell steeply in 2010 and 2011, increased to 579,636sqm in 2012 and thereon gradually reduced to 113,636sqm (QAR34mn) in 2015.
Chart 114. Qatar’s Grills and Fencing Imports, 2001 to 2015
171
19
2001
182
20
2002
194
28
2003
116
17
2004
217
49
2005
203
42
2006
330
72
2007
336
75
2008
492
119
2009
227
50
2010
134
42
2011
580
85
2012
204
50
2013
130
33
2014
114
34
2015
Tho
usan
d s
qm
Import Volume Imports Value
QA
R m
n
0
100
200
300
400
500
600
700
0
20
40
60
80
100
120
140
Source: ITC Trademap, Team Analysis
Exports: Analysis of historical export data indicates that exports have been highly irregular and small as compared to the domestic production. Across 2001 and 2015, the annual exports averaged at 5,933sqm of grills and fencing.
Chart 115. Qatar’s Grills and Fencing Exports, 2001 to 2015
Source: ITC Trademap, Team Analysis
Tho
usan
d s
qm
Export Volume Exports Value
QA
R m
n
0
5
10
15
20
25
0.0
1.0
2.0
3.0
4.0
5.0
6.0
2001 2002 20082003
1
2004 2005
16
2006 2007 2009
15
2010
23
2011
13
2012
4
2013
10
2014 2015
2
0.3 0.2 0.40.0
0.2
5.1 5.3
3.2
1.1
2.1
0.20.5
132 Manufacture of Structural Metal Products
5.1.6.2.2. Trade by Source and Destination
Imports: The analysis of grills and fencing total imports, during the period 2010 to 2015, amounting to 76,408MT from 2010 to 2015, indicates that the UAE (66%), China (10%) and the KSA (9%) are the major sources of imports.
Chart 116. Key Sources of Grills and Fencing Imports, 2010 to 2015
UAE
China
Saudi Arabia
UKBahrain
Rest of the World
2010 2011 2012 2013 2014 20150%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Kuwait
Saudi Arabia
UAE
OmanYemen
Rest of the World
2010 2011 2012 2013 2014 20150%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Source: ITC Trademap, Team Analysis
From 2010 to 2015, the UAE was a dominant source of imports; however, its share decreased from 84.5% in 2012 to 38.1% in 2015. During this period, the share of Chain and Saudi Arabia in imports into Qatar increased gradually to reach 29.9% and 15.3%, respectively.
Exports: The analysis of grills and fencing total exports from Qatar, during the period 2010 to 2015, amounting to 2,852MT indicates that Kuwait (43%), the KSA (24%) and the UAE (11%) are the major destinations for exports.
Chart 117. Key Destinations of Grills and Fencing Exports, 2010 to 2015
Source: ITC Trademap, Team Analysis
133Manufacture of Structural Metal Products
During 2010 to 2015, the exports of grills and fencing were to nearby countries, such as Kuwait, Saudi Arabia, the UAE, Oman and Yemen. In 2014 and 2015, most of the exports were to Saudi Arabia, while in 2010 and 2011, Kuwait was the leading destination for exports.
5.1.6.2.3. Share of Imports in Domestic Consumption
Share of imports in Qatar’s grills and fencing market has reduced from an all-time high of 96% in 2001 to 12% in 2015, with the exception of intermediate years such as 2007, 2009 and 2012 when the imports serviced major portions of the market.
Chart 118. Qatar’s Grills and Fencing Imports Vs Domestic Sales, 2001 to 2015
Domestic Sales Imports % Share of Imports
Tho
usan
d s
qm
% s
hare
0%
20%
40%
60%
80%
100%
120%
85 213 175 251 172 404 155 336 382 80 478 563 860171
182194
116 217203 330
336
492227
134580
204130
114
96%
82%
69%
35%
55%
45%
66%
45%
76%
40%
26%
88%
30%
19%12%
0
200
400
600
800
1,000
1,200
2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015
Source: Team Analysis, ITC Trademap
5.1.6.2.4. Assessment of Export Opportunities
Primary interviews with the architectural steel fabrication units indicate that, due to a high cost of operations, Qatar’s production is not cost competitive and hence, architectural steel fabrication units do not consider the export of grills and fencing as an attractive opportunity. Due to high cost of salaries, rent and raw material, production cost in Qatar is high as compared to other countries in the GCC region. Analysis of export data indicates that across the 2001 and 2015 period, exports of grills and fencing constituted only about 2.1% of the domestic production.
5.1.6.2.5. Trade Forecast
Imports: As the percentage of share of imports has fallen over the years, considering the near term trends, the import forecast of grills and fencing indicates that about 23.6% of the market requirements (in quantity terms) will be met by imports. Primary interviews with industry players indicates that imports are about 20% to 25% cheaper than the domestic production. Imports are likely to range from 159,837sqm in 2016 to 180,556sqm in 2026.
134 Manufacture of Structural Metal Products
Chart 119. Qatar’s Grills and Fencing Import Forecast, 2015 to 2026
Domestic Sales sqm % Share of Imports
% s
hare
Tho
usan
d s
qm
2015 2016e 2017F 2018F 2019F 2020F 2021F 2022F 2023F 2024F 2025F 2026F
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
0
100
200
300
400
500
600
700
800
900
1,000
1,100
860 517 505 514 528 540 550 559 566 573 580 584
114
160 156 159 163 167 170 173 175 177 179 181
11.7%
23.6% 23.6% 23.6% 23.6% 23.6% 23.6% 23.6% 23.6% 23.6% 23.6% 23.6%
Source: Team Analysis, ITC Trademap
Exports: The ten-year export forecast of grills and fencing indicates that exports may have a minor opportunity as only 2.1% of the domestic production may be exported. Exports are most likely to be limited to rare opportunities, e.g., Qatari civil contractors winning international projects and planning to source from Qatar-based fabricators. Exports are likely to range from 10,725sqm in 2016 to 12,115sqm in 2026.
Chart 120. Qatar’s Grills and Fencing Export Forecast, 2015 to 2026
Domestic Sales Exports Exports as % of domestic production
860
517 505 514 528 540 550 559 566 573 580 584
2
11 10 11 11 11 11 12 12 12 12 12
0.2%2.1% 2.1% 2.1% 2.1% 2.1% 2.1% 2.1% 2.1% 2.1% 2.1% 2.1%
Tho
usan
d s
qm
% s
hare
0%
5%
10%
15%
20%
25%
30%
2015 2016e 2017F 2018F 2019F 2020F 2021F 2022F 2023F 2024F 2025F 2026F
0
100
200
300
400
500
600
700
800
900
1,000
1,100
1,200
Source: Team Analysis, ITC Trademap
135Manufacture of Structural Metal Products
Small-sized Firms
Based on insights from primary interviews, these firms have capacities not greater than 380MT per annum. These units have less than 10 employees and 70% of their capacities focus on architectural steel fabrication works comprising products such as entrance gates, decorative doors, steel staircase railing and grill fencing. Qatar has 194 such firms that collectively control 20% share of the market.
Medium-sized Firms
Qatar is home to 263 medium-sized firms, each having an average capacity greater than 380MT per annum and less than 12,000MT per annum of steel fabrication per month. The medium-sized firms collectively have 70% share of the market in volume terms. In case of medium-sized firms, on average, 17.5% of the capacity is dedicated to architectural steel fabrication works.
Large-sized Firms
Qatar’s ten leading firms form the group of large-sized firms. They collectively have 10% share of the architectural steel fabrication market in terms of quantity. On an average, 7.5% of their capacity focuses on architectural steel fabrication works and the rest (92.5%) is dedicated to structural steel fabrication jobs.
5.1.6.3. Pricing Analysis
The selling prices of grills and fencing are quoted on a per sqm basis and vary as per the design, size, paint color and other specifications. Currently, the 2016 domestic prices for grills and fencing are in the range of QAR300 to QAR700 per sqm (average of QAR400 per sqm). On average, imports are 23.1% cheaper than the domestic production. Considering the inflation rates in Qatar, the average price is expected to reach QAR511 per sqm in 2026 for domestic production and QAR393 per sqm for imports.
Chart 121. Qatar’s Grills and Fencing Selling Prices Forecast, 2015 to 2026
QA
R p
er s
qm
0
100
200
300
400
500
600
2015
390
300
2016E
400
308
2017F
411
316
2018F
422
325
2019F
433
333
2020F
444
341
2021F
454
349
2022F
465
358
2023F
476
366
2025F
499
384
2026F
511
393
2024F
488
375
Domestic price Import price
Source: Team Analysis, Primary Interviews
5.1.7. Supply-Side Analysis
5.1.7.1.1. Market Structure
The structure of Qatar’s architectural steel fabrication market that comprises about 467 firms is fragmented. Based on the capacities of the architectural steel fabrication firms, they can be classified as large, medium and small. Most architectural fabrication units have capabilities to undertake both architectural steel fabrication and structural steel fabrication works.
136 Manufacture of Structural Metal Products
Chart 122. Qatar’s Architectural Steel Fabrication Market structure and Capacity Utilization
20.0%Small
70.0%Medium
10.0%Large
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
MT
Installed capacity Capacity Utilization (%)
Large
15,043
50%
Medium
82,845
64%
Small
20,370
74%
0
50,000
100,000
150,000
200,000
250,000
300,000
Source: Team Analysis, Primary Interviews, MDPS Annual Bulletin of Industry and Energy Statistics 2015
In terms of products and services, the leading players have well-developed capabilities and focus on structural steel fabricating works. Architectural steel fabrication products such as doors, railings, grills and fencing are ancillary products to the structural steel fabrication job orders taken by the large firms.
With regards to the architectural steel fabrication products, small-sized firms have an average capacity utilization rate of 74.1%, followed by medium-sized firms at 63.8%, with large firms lagging behind at 50.2%. The overall industry capacity utilization rate is 63.8%.
Table 15. Architectural Steel Fabrication Market Structure Snapshot
Architectural Steel Fabrication Units Large Medium Small Total
Number of players Number 10 263 194 467
Average monthly capacity per player MT 1,671.4 150.0 12.5
Average % share of capacity used for architectural works % 7.5% 17.5% 70%
Architectural fabrication average capacity p.a. per player MT 1,504 315 105
Capacity per category – Architectural works MT 15,043 82,845 20,370 118,258
Market share % 10% 70% 20% 100%
Sales MT 7,548 52,838 15,097 75,483
Capacity utilisation % 50.2% 63.8% 74.1% 63.8%
Source: Team Analysis, Primary Interviews, MDPS Annual Bulletin of Industry and Energy Statistics 2015
137Manufacture of Structural Metal Products
5.1.7.1.2. Profiling of Key Domestic Players
Table 16. Architectural Steel Fabrication: Key Domestic Players104
Company Year of establishment Products/Projects Installed capacity and units
Gulf Steel 1989• Architectural steel fabrication for metro
rail, stadium and airport
• Industrial, commercial, architectural works12,000MT per annum
Qatar Metal Industries, UAE
2007 • Steel doors (fire and non-fire rated) 10,000sqm per month
Steel Master 2011
• Hot-rolled steel structures
• Warehouses shades
• Staircase
• Gates, grills, handrail, cladding, hangers
• Erection of structural steel works
6,000MT per annum
Hadadco 2005
• Entrance gates
• Decorative doors
• Staircase
• Handrail, grills and fencing
• Other decorative parts.
3,000sqm per month
Style engineering 1996
• Railing
• Doors
• Tanks
• Pipeline and mechanical engine works
1,000sqm per month
Drabzin 1991
• Entrance gates
• Decorative doors
• Staircase
• Handrail, grills and fencing
• Other decorative parts
800 to 1,000sqm per month
Jersey decoration 1991
• Entrance gates
• Decorative doors
• Staircase
• Handrail, grills and fencing
• Other decorative parts
NA
Al Einkiaz & Pilot Trading and Contracting Company
1976
• Fire rated doors
• Handrails and fencing
• Rolling shutters
• Structural steel works
• Pre-fabricated building
• Aluminum and glass works
• Other aluminum works
NA
104 Primary Interviews, company websites
138 Manufacture of Structural Metal Products
5.1.7.1.3. Business Model Analysis
The architectural steel fabrication market is dominated by small- and medium-sized players. They are flexible, agile in terms of their business approach and can focus on a varied mix of products, projects and customers.
Some players such as Hadadco and Drabzin focus exclusively on architectural steel fabrication works. They focus on villa projects, serve the local market with products such as entrance gates, decorative gates and staircase handrails, and have showrooms at prominent areas in Doha.
Other players such as Al Einkiaz, Gulf Steel and Steel Master focus on both architectural and structural works. Some players such as JAFCO and Qore Aluclad focus on architectural steel fabrication works and architectural aluminum fabrication works.
Given the low-entry barriers, widespread application of steel and a large market size, architectural steel fabrication has been an attractive sector for Qatari entrepreneurs. With several firms operating in the market and each targeting the same project, competition to win contracts is intense.
5.1.7.1.4. Domestic Production Competitiveness
Access to inexpensive raw materials and a large market underlines the profitability and feasibility of any industrial venture. The key factors that influence the competitiveness of domestic production of architectural steel fabrication units include raw material, labor, market size and the impact of competition.
Raw Material: Qatar does not have domestic production of raw materials such as steel plates, sheets and rods. The domestic raw material production capacity is underdeveloped, limited to small sections (less than 80mm). Hence, all architectural steel fabrication units in Qatar depend on imports to meet their raw material needs.
Our primary research indicates that raw materials are procured from countries such as China, India, the KSA, Turkey and the UAE. Expensive raw materials significantly impact the cost of domestically produced finished goods.
High Operational Expenses: Our primary interviews indicate that operational costs are significantly higher in Qatar than in nations exporting to Qatar, i.e., China, India, the UAE, Turkey, etc. This adversely affects the price competitiveness of domestic production. Operational expenses are affected by high rents for accommodation, high salaries and high rents for non-residential spaces that increases the fixed expenses.
Number of Players: Due to the fragmented nature of the market and the large number of players (467 players), steel fabrication market in Qatar is characterized by fierce competition and price sensitivity.
5.1.8. Demand–Supply AnalysisConsidering the 467 firms operating in the market, the installed capacity is 118,258MT per annum. This does not include assumptions for new players having plans to enter the market that have not been announced so far. Comparing with market size estimates (including imports projection), the demand–supply gap points toward an oversupply of 53,295MT in 2020 to 47,993MT in 2026.
Chart 123. Qatar’s Architectural Steel Fabrication Demand-Supply Analysis, 2014 to 2026
94
62
61
62
64
65
66
67
68
69
70
70
118
118
118
118
118
118
118
118
118
118
118
118
(24)
(56) (58) (56) (55) (53) (52) (51) (50) (49) (49) (48)
Tho
usan
d M
T
Architectural Steel Fabrication Market Size (Total Demand, incl. imports) 000s MTSupply (Domestic installed capacity) 000s MT Demand Supply Gap
2015 2016E 2017F 2018F 2019F 2020F 2021F 2022F 2023F 2024F 2025F 2026F
0
(80)
(60)
(40)
(20)
20
40
60
80
100
120
140
Source: Team Analysis, Primary Interviews, MDPS Annual Bulletin of Industry and Energy Statistics 2015, ITC Trademap
139Manufacture of Structural Metal Products
5.1.9. Regulatory AnalysisQatar Construction Specification 2014105: As steel fabrication products are used in the construction sector, their production, installation and usage are mainly regulated by the following sections of Qatar Construction Specifications (QCS) 2014.
a) QCS 2014 Section 16: Structural Steelworks This section has general instructions and regulations related to materials, drawing, fabrication, welding, bolting, accuracy of fabrication, erection, accuracy of erected steel work and protected treatment.
b) QCS 2014 Section 17: Metal Work This section has general instructions and regulations related to material classification, metal doors and windows, architectural metalwork, light metal support, cladding support and workmanship.
In addition to the above, steel fabrication units are expected to be familiar with other relevant sections of the QCS that regulate construction activities having an interface with steel fabrication products. These sections include section 13 (Masonry), section 14 (Roofing), section 4 (Foundation and retaining structures) and section 5 (Concrete).
Ministry of Environment: Steel fabrication units need to be approved by the Ministry of Environment.
Civil Defense Department (Ministry of Interior): All building material products need an approval from the Civil Defense Department (Ministry of Interior) as per Emiri Decree No. 9/2012. Steel fabrication units have to comply with applicable fire safety norms.
ISO Certification: Obtaining ISO certifications (Quality 9001, OHSAS 18001 and Environment 14,001) are vital for tendering purposes.
Apart from the above, all prospective entrepreneurs need to follow applicable laws on company registration, industrial license and obtaining land and building permissions for setting up a steel fabrication facility in Qatar.
105 QCS 2014
140 Manufacture of Structural Metal Products
5.1.10. SWOT Analysis and Michael Porter’s Five-Force Analysis
5.1.10.1. SWOT Analysis
Figure 17: Architectural Steel Fabrication SWOT Analysis
Summary:
In the medium to long term, the strengths and the opportunities outweigh the weaknesses and threats due to a large market size, upcoming projects pipeline in Qatar, fragmented customer base (villa projects) and the localized nature of the product.
• Upcoming real estate projects across asset classes such as villas, multi-story buildings and commercial buildings.
• Opportunity to use creative and architectural aspects for product differentiation.
• Opportunity to differentiate from competitor by focusing on a combination of products.
• Fragmented customer base (in villa segment) would restrict the growth of imports beyond current levels.
• Addressable market199 of QAR629mn in 2016 growing at a CAGR of 3.7% in value terms, to reach QAR909mn in 2026.
• Wide range of products such as entrance gate, decorative doors, staircase railing, grills and fencing.
• Domestic players have been able to acquire a majority share in products such as entrance gates, decorative doors, staircase handrails, grills and fences.
STRENGTHS OPPORTUNITIES
• Low-priced imports adversely impacting the salability of domestic production in times of economic slowdown.
• Intense rivalry between fabricators threatening new entrants
• Highly price-sensitive market
• In case of products such as rolling shutters and steel flush doors, nearly 80% of the market is served by imports200.
• Dependence on imports for raw materials affecting price competitiveness.
THREATSWEAKNESSESSWOT
Architectural Steel Fabrication
141Manufacture of Structural Metal Products
5.1.10.2. Michael Porter’s Five-Force Analysis
Figure 18: Michael Porter’s Five Forces Model (Architectural Steel Fabrication)
High:
• Architectural steel fabrication market is highly competitive with several players operating in the market.
• Intense competitive rivalry ensures that price and relationship are the key deciding factors in securing a job order.
COMPETITIVE RIVALRY
High:
• Architectural steel fabrication is neither capital-intensive nor technology-intensive.
• Creative designs for architectural products, can be achieved by hiring. suitable staff. Thus, the threat of new entry is high.
THREAT OF NEW ENTRY
Medium:
• Despite a significant number of fabricators operating in the business, the bargaining power of consumers is medium as there is scope for product differentiation based on design and creative inputs.
BARGAINING POWER – CONSUMERS
High:
• Raw materials for architectural steel fabrication (e.g., sheets, plates, rods) are not manufactured in Qatar; hence, manufacturers have to rely on imports.
• Suppliers have high bargaining power.
BARGAINING POWER – SUPPLIERS
Low:
• The boundaries within which wood, steel, glass and aluminum can be used architectural products are well set. Hence, it is unlikely for architectural steel fabrication products to be substituted by other materials.
THREAT OF SUBSTITUTION
142 Manufacture of Structural Metal Products
5.2. Critical Success FactorsCritical Success Factors include the following:
Figure 19: Critical Success Factors - Architectural Steel Fabrication
Access to Raw Material
Raw material forms an important part of the costs incurred by an architectural steel fabrication unit. Costs related to these are influenced by global trends in the commodity prices. Entrepreneurs are unlikely to have any control over raw material prices. Hence, competitiveness in procurement and compliance with good practices in raw material and inventory management such as economic order quantity and just in time, is essential.
Access to Markets and Strategic Linkages with Civil Contractors
Entrepreneurs should develop a strong relationship and strategic linkages with civil contractors focusing on villa projects as this would help in sustaining a steady order book.
Technical Know-how
Technical knowledge of fabricators, workforce and sales team is important to execute highly complex projects with optimum efficiency and minimal errors. It enables fabricators to stay ahead of the competition as well as deliver world-class services to their customers.
Investment in Machinery
Companies should invest in modern machinery, experienced welders, designers and project managers. This would enable them to deliver demanding projects and gain an edge over the competition.
Access to Skilled Laborers
Creativity and workmanship are the key tools for differentiating products in a competitive market. Hiring skilled staff such as designers, welders and supervisory staff is highly important.
Operational Efficiency
Efficiency in day-to-day operations such as fabrication, supervision and other shop floor activities can help in cost optimization. Compliance with ISO norms for Quality (ISO 9001), OHSAS (ISO 18,001) and Environment (ISO 14001) would lead to standardization of procedures, put in place a system of checks and balances, and help achieve compliance with regulatory norms. This can be a key tool in achieving efficiency in operations.
Customer Service
Thorough understanding of the clients’ requirements is crucial in gaining the trust of the customers. In case of the villa segment, the fabricator is in direct contact with the end-user, i.e., the residents of the villa. A delighted end-user can help spread word-of-mouth goodwill, which can prove to be highly beneficial in a competitive market.
143Manufacture of Structural Metal Products
5.3. OutlookQatar’s growing real estate sector offers opportunities for new units in the architectural steel fabrication market in products such as entrance gates, decorative doors, staircase handrails, grills and fencing.
The architectural steel fabrication formed a sizable portion (12.4%) of the structural metal products sector in 2015. In terms of domestic production value architectural steel fabrication has 11.7% share of the overall structural metal products sector. Villas would account for 45% of Qatar’s upcoming real estate development of 78.9mn sqm over 2016 and 2026. Villas are likely to be a prime driver for most architectural products. On the back of strong demand drivers, the market is expected to grow at a CAGR of 3.7% from QAR629mn in 2016 to an estimated QAR909mn in 2026106
The given market size and a moderate pace of growth offer an opportunity for new players to tap into 806MT worth of average incremental business every year from 2017 to 2026, subject to competitive challenges. Owing to this, opportunities exist for one medium-sized player (1,800MT per annum running at 80% utilization) dedicated to architectural steel fabrication works, to enter the market every two years.
High HighHigh High High
Medium Low
Access to raw material
Access to skilled labourers
Operational efficiency
Access to markets and strategic linkages
Technical know-how
Customer service
Investment in machinery
In terms of challenges, the market is likely to remain significantly competitive and price sensitive. Heavy dependence on imports for procurement of raw materials and high operational expenses (salaries, rent, etc.) as compared to those in other countries such as the UAE and the KSA would limit export potential to rare opportunities107. Imports are likely to remain cheaper as compared to domestic production and further heighten the challenges.
In the medium to long term, the strengths and the opportunities outweigh the weaknesses and threats due to large market size, upcoming projects pipeline in Qatar, fragmented customer base (villa projects) and the localized nature of the product.
106,107 Team Analysis
144 Manufacture of Structural Metal Products
6.1. Qatar Market OverviewArchitectural aluminum fabrication emerges as the second largest segment of the structural metal products sector. It serves the varied needs of real estate asset developments across asset classes such as villas, multi-story buildings, commercial developments, public buildings and industrial facilities. The architectural aluminum fabrication market constituted a sizable portion (21.4%) of the structural metal products sector in 2015. In terms of domestic production value, it has 18.9% share of the overall structural metal products sector. Key products in the architectural aluminum fabrication segment are:
a) Aluminum and glass fabrication works
b) Aluminum sheet cladding
c) Aluminum doors, windows and partitions
d) Aluminum railings and fencing
Chart 124. Architectural Aluminum Fabrication Market Segmentation, 2015
6. Architectural Aluminum Fabrication
1.7% Aluminum railing and fencing
4.6% Aluminum doors,windows & partitions
77.2%Aluminum and
Glass works
16.5%Aluminum sheet
cladding works
Aluminum and Glass works
Aluminum sheet cladding works
Aluminum doors, windows & partitions
Aluminum railing and fencing
Architectural Aluminum Fabrication
market QAR1,656mn
Source: Team Analysis, ITC Trademap, MDPS Annual Bulletin of Building Permits and Competed Building Statistics
The 2015 architectural aluminum fabrication market is estimated at QAR1,656mn108. Real estate asset classes, such as villas and multi-story residential developments, commercial buildings and public buildings are likely to be the prime driver of architectural products. Key products include aluminum and glass works (77.2% share), aluminum doors, windows and partitions (4.6% share), aluminum railings and fencing (1.7% share) and aluminum sheet cladding works (16.5% share). Going forward, the market is expected to grow at a CAGR of 4.4% from QAR893mn in 2016 to reach an estimated QAR1,375mn in 2026.
The structure of Qatar’s architectural aluminum fabrication market that comprises about 70 firms is fragmented. Based on the capacities of the firms, they can be classified as large, medium and small. Large-sized players have 39.3% share of the sales by domestic players, followed by medium-sized players and small-sized players having 37.9% and 22.8% share, respectively. Most large- and medium-sized
108 Team Analysis
145Manufacture of Structural Metal Products
architectural aluminum fabrication firms have capabilities to undertake the fabrication of all types of architectural aluminum products, such as aluminum and glass works, aluminum sheet cladding, doors, windows and partitions, staircase railings and fencing, while small firms are restricted to less-intensive fabrication works and assembly of imported aluminum and glass works.
Qatar does not produce glass, which is a major raw material consumed in aluminum and glass works. Similarly, Qatar does not produce aluminum sheets that are used to manufacture aluminum composite panels used in aluminum sheet cladding works. Due to high salaries, rents and cost of raw materials, production cost in Qatar is higher than in other countries in the GCC region. Therefore, aluminum and glass works and aluminum sheet cladding works are localized products and are not exportable.
Other products, such as aluminum doors, windows and partitions and aluminum staircase railing, have export potential as they can source aluminum extrusion profiles from Qatar-based extruders.
The subsequent sections of the report provide a detailed market analysis of each of the product segments listed above.
6.1.1. Aluminum and Glass WorksAluminum extrusion profiles are used along with glass to fabricate various products, such as aluminum and glass doors, aluminum and glass windows, curtain walls and skylights. These products are used in all types of real estate asset classes, such as villas, multi-story residential buildings, commercial buildings and public buildings. Raw materials include aluminum extrusion profiles, glass, silicon-based fillers, frames and fixing accessories. As compared to steel, aluminum is lightweight and does not rust. It can be delivered in various colors and finishes and hence, is a commonly used metal for architectural products.
6.1.1.1. Demand-Side Analysis
6.1.1.1.1. Historical and Current Market Size
Aluminum and glass works market has followed the real estate development trends. The market size grew from 464,932sqm (QAR173mn) in 2001 to 1,609,586sqm (QAR1,042mn) in 2008, implying a CAGR of 19.4%. The sizable expansion in 2006 (market size of 2,476,090sqm) could be attributed to the demand arising from Asian Games 2006109 and related developments. The slowdown of 2008–2009 led to subdued real estate development activity in the subsequent years, which reduced the market size to 805,083sqm in 2010. Thereafter, the market recovered and is estimated to have reached 1,892,844sqm in 2015 (QAR1,279mn).
Chart 125. Qatar’s Aluminum and Glass Works Demand, 2001 to 2015
465 616 644 1,099 1,103 2,476 1,588 1,610 952 805 844 1,107 997 1,238 1,893
173229 245
446 487
1,225
892
1,042
586484 517
691641
823
1,279
Market Size (Volume, 000's sqm) Market Size (Value, QAR mn)
2001 2002 20082003 2004 2005 2006 2007 2009 2010 2011 2012 2013 2014 2015
Tho
usan
d s
qm
QA
R m
n
0
300
600
900
1,200
1,500
1,800
2,100
2,400
2,700
3,000
0
200
400
600
800
1,000
1,200
1,400
Source: Team Analysis, ITC Trademap, MDPS Annual Bulletin of Building Permits and Competed Building Statistics
109 Primary Interviews
146 Manufacture of Structural Metal Products
6.1.1.1.2. Market Size Segmentation by Products
Curtain walls emerge as the largest segment in the aluminum and glass works sector, accounting for 65% (1,230,349sqm) of the market demand, followed by aluminum and glass doors and windows at 30% (567,853sqm). Skylight and domes have a small share of 5% (94,642sqm).
Chart 126. Architectural Aluminum Fabrication Market Segmentation, 2015
30% Aluminum andglass doors and windows
65%Curtain wall
5%Skylight and domes
Alumimum and Glass works:
1,892,844sqm
Curtain walls are used as façades, mostly in multi-story residential buildings, commercial developments and public buildings. Aluminum and glass doors are commonly used in non-residential developments whereas aluminum and glass windows are used across all types of real estate asset classes. Skylights and domes are used as a part of the roof covering atriums and courtyards in commercial buildings.
6.1.1.1.3. Demand Drivers
The demand for aluminum and glass works is driven by requirements from real estate development projects that include various types of asset classes, such as villas, multi-story residential buildings, commercial developments, public buildings and industrial facilities. Civil contractors undertaking construction contracts constitute the customer segment. Architects and interior designers who design aluminum and glass works are the key influencers.
6.1.1.1.4. Demand Forecast
The decline in oil prices in 2014 and 2015 is likely to affect the development of new real estate projects that are either planned or underway. The market size is estimated to have reduced by 49.6% from 1,892,844sqm in 2015 to 953,775sqm in 2016.
Going forward, the aluminum and glass works market is expected to grow from 953,775sqm in 2016 to an estimated 1,151,172sqm in 2026, registering a CAGR of 1.9%. In value terms, the market would grow at a CAGR of 4.5% from QAR660mn to reach QAR1,022mn in 2026.
Source: Team Analysis, Primary Interviews
Chart 127. Qatar’s Aluminum and Glass Works Demand Forecast, 2015 to 2026
Tho
usan
d s
qm
Market Size (Volume, sqm) Market Size (Value, QAR mn)
QA
R m
n
2015 2016E 2017F 2018F 2019F 2020F 2021F 2022F 2023F 2024F 2025F 2026F
1,893 954 936 957 990 1,020 1,048 1,073 1,094 1,116 1,134 1,151
1,279
660665 699
742 783 823 864 903 944 982 1,022
01002003004005006007008009001,0001,1001,2001,3001,4001,500
0
200
400
600
800
1,000
1,200
1,400
1,600
1,800
2,000
Source: Team Analysis, ITC Trademap, MDPS Annual Bulletin of Building Permits and Competed Building Statistics
147Manufacture of Structural Metal Products
6.1.1.2. Trade Analysis
6.1.1.2.1. Historical Trade Analysis
Imports have followed the market size and real estate development trends. Primary interviews with aluminum and glass fabricators indicate that 25% of the market, in value terms, was serviced by imports between 2001 and 2015. The key sources of imports are the UAE, the Saudi Arabia and other GCC region countries. This implies that fabricators from UAE, Saudi Arabia bagged orders for providing curtain walls, aluminum and glass doors etc. for projects in Qatar.
Chart 128. Qatar’s Aluminum and Glass Works Imports, 2001 to 2015
137
43
2001
181
57
2002
473
260
2008
189
61
2003
323
112
2004
324
122
2005
728
306
2006
467
223
2007
280
147
2009
237
121
2010
248
129
2011
326
173
2012
293
160
2013
364
206
2014
557
320
2015
Import Volume Import Value
Tho
usan
d s
qm
QA
R m
n
0
100
200
300
400
500
600
700
800
0
50
100
150
200
250
300
350
328 435 455 776 779 1,748 1,121 1,136 672 568 596 782 704 874 1,336
181 189
323 324
728
467 473
280237 248
326293
364
557
465616 644
1,099 1,103
1,588 1,610
952805 844
1,107997
1,238
1,893
Domestic Sales Imports
Tho
usan
d s
qm
2001 2002 20082003 2004 2005 2006 2007 2009 2010 2011 2012 2013 2014 2015
0
300
600
900
1,200
1,500
1,800
2,100
2,400
2,700
3,000
2,476
Source: ITC Trademap, Team Analysis
6.1.1.2.2. Share of Imports in Domestic Consumption
Imports account for 29.4% of Qatar’s market in quantity terms as imports is about 20% cheaper than domestic production110. Imports include products from the aluminum and glass product segment, such as curtain wall, aluminum and glass doors, that are fabricated in countries such as the UAE and Saudi Arabia, and sold to projects in Qatar.
Chart 129. Qatar’s Aluminum and Glass Works Imports Vs Domestic Sales, 2001 to 2015
Source: Team Analysis, ITC Trademap
110 Primary Interviews
148 Manufacture of Structural Metal Products
6.1.1.2.3. Trade Forecast
Imports: The import forecast of aluminum and glass works indicates that about 29.4% of the market requirements (in quantity terms) will be met by imports. Primary Interviews indicate that imports are about 20% cheaper than domestic production. Imports are likely to range from 280,522sqm in 2016 to 338,580sqm in 2026
Chart 130. Qatar’s Aluminum and Glass Works Import Forecast, 2015 to 2026
Domestic Sales Imports % Share of Imports
Tho
usan
d s
qm
% s
hare
2015 2016E 2017F 2018F 2019F 2020F 2021F 2022F 2023F 2024F 2025F 2026F
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
1,336 673 661 675 699 720 739 757 773 788 800 813
557
281 275 281 291 300 308 316 322 328 333 339
1,893
954 936 957 990 1,020 1,048 1,073 1,094 1,116 1,134 1,151
29.4% 29.4% 29.4% 29.4% 29.4% 29.4% 29.4% 29.4% 29.4% 29.4% 29.4% 29.4%
0
200
400
600
800
1,000
1,200
1,400
1,600
1,800
2,000
600
1,000
300
1,000
800
1,600
Curtain wall Door/Windows Skylight and domes
QA
R /
sq
m
Min Max
0
200
400
600
800
1,000
1,200
1,400
1,600
1,800
Source: Team Analysis, ITC Trademap
6.1.1.3. Pricing Analysis
The selling prices of aluminum and glass works are quoted on the basis of per sqm and vary as per the product type, size, design, detailing, color and other specifications. The price ranges for key products are given below.
Chart 131. Price Range of Aluminum and Glass Works
Source: Team Analysis, Primary Interviews
149Manufacture of Structural Metal Products
On average, imports are 20% cheaper than domestic production. Considering the inflation rates in Qatar, the average prices are expected to reach QAR943 per sqm for domestic production and QAR754 per sqm for imports in 2026.
Chart 132. Qatar’s Aluminum and Glass Works Selling Prices Forecast, 2015 to 2026
QA
R p
er s
qm
Domestic price Import price
2015
718
574
2016E
735
588
2017F
755
604
2018F
776
621
2019F
796
637
2020F
815
652
2021F
835
668
2022F
855
684
2023F
876
701
2024F
898
718
2025F
920
736
2026F
943
754
0
100
200
300
400
500
600
700
800
900
1,000
Source: Team Analysis, Primary Interviews
6.1.2. Aluminum Sheet Cladding WorksAluminum sheets are used as a cladding material on building facades. These are commonly used in combination with aluminum and & glass curtain wall products. Aluminum and glass fabricators opine that the metallic luster of aluminum sheet cladding improves the aesthetic appeal of the buildings, giving it a modern appearance. These products are commonly used in commercial developments and public buildings. Raw materials include either finished aluminum sheets (solid aluminum sheet or aluminum composite panels), silicon-based fillers, and fixing accessories.
6.1.2.1. Demand-Side Analysis
6.1.2.1.1. Historical and Current Market Size
Real estate development trends have influenced the aluminum cladding works market. The market size grew from 232,466sqm (QAR37mn) in 2001 to 804,793sqm (QAR222mn) in 2008, implying a CAGR of 19.4%. The slowdown of 2008–2009 led to subdued real estate development activity in the subsequent years, which reduced the market size to 402,541sqm in 2010. Thereafter, the market recovered gradually and is estimated to have reached 946,422sqm in 2015 (QAR273mn).
150 Manufacture of Structural Metal Products
Chart 133. Qatar’s Aluminum Sheet Cladding Works Demand, 2001 to 2015
6.1.2.1.2. Market Size Segmentation by Products
Most commonly used are non-fire rated aluminum sheet cladding also commonly known as aluminum composite panel cladding that has 95% market share.
Fire-rated aluminum cladding is a small segment used in specified areas that are prone to fire. Solid aluminum panels are used in fire-rated aluminum sheet cladding. Solid aluminum panels have aluminum sheets on the either side of a corrugated sheet, which gives it the desired thickness.
Chart 134. Aluminum Sheet Cladding Market Segmentation, 2015
232
37
2001
308
49
2002
322
52
2003
549
95
2004
551
104
2005
1,238
261
2006
794
190
2007
805
222
2008
476
125
2009
403
103
2010
422
110
2011
554
147
2012
498
137
2013
619
175
2014
946
273
2015
Tho
usan
d s
qm
Market Size (Volume, 000's sqm) Market Size (Value, QAR mn)
QA
R m
n
0100200300400500600700800900
1,0001,1001,2001,3001,4001,500
020406080100120140160180200220240260280300
Source: Team Analysis, ITC Trademap, MDPS Annual Bulletin of Building Permits and Competed Building Statistics
95% Non fire rated
5%Fire rated
Aluminum sheet cladding works
946,422sqm
Source: Team Analysis, Primary Interviews
6.1.2.1.3. Demand Drivers
The demand for aluminum sheet cladding works is mainly driven by commercial developments, public buildings and multi-story residential buildings. Civil contractors undertaking construction contracts constitute the customer segment. Architects who design buildings are the key influencers.
6.1.2.1.4. Demand Forecast
The decline in oil prices in 2014 and 2015 is likely to affect the development of new real estate projects that are either planned or underway. The market size is estimated to have reduced by 49.6% from 946,422sqm in 2015 to 476,888sqm in 2016.
Going forward, the aluminum sheet cladding works market is expected to grow from 476,888sqm in 2016 to an estimated 575,586sqm in 2026, registering a CAGR of 1.9%. In value terms, the market would grow at a CAGR of 4.5% from QAR141mn in 2016 to reach QAR218mn in 2026.
151Manufacture of Structural Metal Products
Chart 135. Qatar’s Aluminum Sheet Cladding Works Demand Forecast, 2015 to 2026
Tho
usan
d s
qm
Market Size (Volume, sqm) Market Size (Value, QAR mn)
QA
R m
n
946
273
2015
477
141
2016E
468
142
2017F
478
149
2018F
495
158
2019F
510
167
2020F
524
175
2021F
536
184
2022F
547
192
2023F
558
201
2024F
567
209
2025F
576
218
2026F0
100
200
300
400
500
600
700
800
900
1,000
0
25
50
75
100
125
150
175
200
225
250
275
300
Source: Team Analysis, ITC Trademap, MDPS Annual Bulletin of Building Permits and Competed Building Statistics
6.1.2.2. Trade Analysis
6.1.2.2.1. Historical Trade Analysis
Imports have followed the market size and real estate development trends. Primary Interviews with aluminum and glass fabricators indicate that in 2015, 25% of the market, in value terms, was serviced by imports. Key sources of imports are the UAE, the KSA and other GCC region countries.
Chart 136. Qatar’s Aluminum Sheet Cladding Works Imports, 2001 to 2015
Tho
usan
d s
qm
Import Volume Imports Value
QA
R m
n
2001
64
9.2
2002
85
12.2
2003
88
13.0
2004
151
23.8
2005
152
26.0
2006
340
65.3
2007
218
47.5
2008
221
55.5
2009
131
31.2
2010
111
25.8
2011
116
27.5
2012
152
36.8
2013
137
34.2
2014
170
43.8
2015
260
68.2
0
50
100
150
200
250
300
350
400
0
10
20
30
40
50
60
70
80
Source: ITC Trademap, Team Analysis
152 Manufacture of Structural Metal Products
6.1.2.2.2. Share of Imports in Domestic Consumption
Imports account for 27.5% of the Qatar market in quantity terms as it is about 12% cheaper than domestic production.
Chart 137. Qatar’s Aluminum Sheet Cladding Works Imports Vs Domestic Sales, 2001 to 2015
169
232
2001
223
85
308
2002
234
88
322
2003
398
151
549
2004
400
152
551
2005
898
340
1,238
2006
576
218
794
2007
584
221
805
2008
345
131
476
2009
292
111
403
2010
306
116
422
2011
402
152
554
2012
362
137
498
2013
449
170
619
2014
686
260
946
2015
Tho
usan
d s
qm
Domestic Sales Imports
0
200
400
600
800
1,000
1,200
1,400
Source: Team Analysis, ITC Trademap
6.1.2.2.3. Assessment of Export Opportunities
Qatar produces aluminum composite panels, which is a major raw material consumed in aluminum sheet cladding works. However, aluminum and glass fabricators import aluminum composite panels from the UAE and the KSA, which is cheaper than domestic production. Due to high cost of production in Qatar as compared to other GCC region countries, export opportunity for aluminum sheet cladding works is unlikely.
6.1.2.2.4. Trade Forecast
The import forecast of aluminum sheet cladding works indicates that about 27.5% of the market requirements (in quantity terms) will be met by imports. Primary interviews aluminum fabricators indicate that imports are about 12% cheaper than domestic production. Imports are likely to range from 131,013sqm in 2016 to 158,128qm in 2026
Chart 138. Qatar’s Aluminum Sheet Cladding Works Import Forecast, 2015 to 2026
% s
hare
Tho
usan
d s
qm
0
100
200
300
400
500
600
700
800
900
1,000
686
946
260
27.5%
2015
346
477
131
27.5%
2016E
340
468
129
27.5%
2017F
347
478
131
27.5%
2018F
359
495
136
27.5%
2019F
370
140
510
27.5%
2020F
380
524
144
27.5%
2021F
389
536
147
27.5%
2022F
397
547
150
27.5%
2023F
405
558
153
27.5%
2024F
411
567
156
27.5%
2025F
417
576
158
27.5%
2026F
Domestic Sales Imports % Share of Imports
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Source: Team Analysis, ITC Trademap
153Manufacture of Structural Metal Products
6.1.2.3. Pricing Analysis
The selling prices of aluminum sheet cladding works are quoted on the basis of per sqm and vary as per the product type, size, design, detailing, color and other specifications. The price ranges from QAR260 to 350 per sqm.
On average, imports are 12% cheaper than domestic production. Considering the inflation rates in Qatar, the average prices are expected to reach QAR391 per sqm for domestic production and QAR344 per sqm for imports in 2026.
Chart 139. Aluminum Sheet Cladding Works Price Range
260
350
Aluminum sheet cladding works
QA
R /
sq
m
Min Max
0
50
100
150
200
250
300
350
400
Source: Team Analysis, Primary Interviews
Chart 140. Qatar’s Aluminum Sheet Cladding Works Selling Prices Forecast, 2015 to 2026
QA
R p
er s
qm
Domestic price Import price
2015 2016E 2017F 2018F 2019F 2020F 2021F 2022F 2023F 2024F 2025F 2026F
298
262
305
268
313
276
322
283
330
291
338
298
346
305
355
312
364
320
373
328
382
336
391
344
200
250
300
350
400
450
Source: Team Analysis, Primary Interviews
154 Manufacture of Structural Metal Products
6.1.3. Aluminum Doors, Windows and PartitionsThis segment includes doors, windows and wall partitions made from solid aluminum with minimal or no glass panels fitted in between. These products are used in all types of real estate asset classes, such as villas, multi-story residential buildings, commercial buildings and public buildings. These are made from aluminum profiles and sections and are usually painted in desired color.
6.1.3.1. Demand-Side Analysis
6.1.3.1.1. Historical and Current Market Size
The market size for aluminum doors, windows and partitions has followed the development trends of commercial projects and multi-story residential developments. The market size grew from 45,775sqm (QAR10.8mn) in 2001 to 160,763sqm (QAR84.1mn) in 2006, at a CAGR of 28.6%.
Chart 141. Qatar’s Aluminum Doors, Windows and Partitions Demand, 2001 to 2015
Door Partition
Window
10.8
2001
11.1
2002
13.0
2003
14.9
2004
57
20.1
2005
161
84.1
2006
86
33.4
2007
122
56.7
2008
188
102.1
2009
172
119.1
2010
193
88.3
2011
404
131.5
2012 2013
187
91.4
2014
160
76.9
2015
121
60.5Tho
usan
d s
qm
Market Size (Volume, sqm) Market Size (Value, QAR mn)
QA
R m
n
0
50
100
150
200
250
300
350
400
450
0
20
40
60
80
100
120
140
160
180
200
Source: Team Analysis, ITC Trademap, MDPS Annual Bulletin of Building Permits and Competed Building Statistics
155Manufacture of Structural Metal Products
However, the market size reduced in 2007 and recovered to reach 188,423sqm in 2009. Thereafter, with the exception of 2012 and 2013, the market had been relatively flat in quantity terms and reached 159,715sqm (QAR76.9sqm) in 2015.
6.1.3.1.2. Demand Drivers
Demand for aluminum doors, windows and partitions is driven by requirements arising from real estate development projects that include various types of asset classes, such as villas, multi-story residential buildings, commercial developments, public buildings and industrial facilities. Civil contractors undertaking construction contracts comprise the customer segment. Architects and interior designers who design doors, windows and partitions are the key influencers.
6.1.3.1.3. Demand Forecast
The aluminum doors, windows and partitions market is expected to grow from 159,715sqm in 2015 to an estimated 177,385sqm in 2026, registering a CAGR of 0.96%. In value terms, the market would grow at a CAGR of 3.4% from QA76.9mn in 2015 to reach QAR111.4mn in 2026. In the near term, the fall in oil prices in 2014 and 2015 is likely to affect the pace of construction activities across the country; hence, the market size is expected to reduce from 159,715sqm in 2016 to 152,715sqm in 2017.
Chart 142. Qatar’s Aluminum Doors, Windows and Partitions Demand Forecast, 2015 to 2026
Tho
usan
d s
qm
Market Size (Volume, sqm) Market Size (Value, QAR mn)
QA
R m
n
160
76.9
2015
156
76.4
2016e
153
76.6
2017F
155
80.2
2018F
160
84.7
2019F
164
88.8
2020F
167
92.7
2021F
170
96.6
2022F
172
100.4
2023F
174
104.2
2024F
176
107.8
2025F
177
111.4
2026F
0
10
20
30
40
50
60
70
80
90
100
110
120
130
0
25
50
75
100
125
150
175
200
225
250
275
300
Source: Team Analysis, ITC Trademap, MDPS Annual Bulletin of Building Permits and Competed Building Statistics
156 Manufacture of Structural Metal Products
6.1.3.2. Trade Analysis
6.1.3.2.1. Historical Trade Analysis
Imports: The analysis of historical import data from 2001 indicates that imports have grown as per the real estate development trends in Qatar. Imports increased from 35,857sqm in 2001 to 106,689sqm (QAR61mn) in 2006. Thenceforth, imports paced up to 169,780sqm (QAR92mn) in 2009, and peaked in 2012 to 380,643sqm (QAR119mn), when due to slowdown, inexpensive imports were preferred over domestic production. Further, imports fell steeply in 2013, but gradually picked up growth in the subsequent years to reach 134,970sqm (QAR62mn) in 2015.
Chart 143. Qatar’s Aluminum Doors, Windows and Partitions Imports, 2001 to 2015
8
2001
7
2002
8
2003
6
2004
33
11
2005
107
61
2006
52
17
2007
87
37
2008
170
92
2009
158
112
2010
176
80
2011
101
49
2013
163
78
2014
135
62
2015
381
119
2012
Tho
usan
d s
qm
Import Volume (000's sqm) Import Value
QA
R m
n
0
50
100
150
200
250
300
350
400
0
20
40
60
80
100
120
140
Source: ITC Trademap, Team Analysis
Exports: The analysis of historical export data indicates that exports have been very irregular and very small as compared to the domestic production. During 2001 and 2015, annual exports averaged at 223sqm. In 2015, exports peaked at 16,605sqm on account of the exports of wall partitions to Kuwait.
Chart 144. Qatar’s Aluminum Doors, Windows and Partitions Exports, 2001 to 2015
Tho
usan
d s
qm
QA
R m
n
0
2
4
6
8
10
12
0
2
4
6
8
10
12
14
16
18
2001 2002 2003 2004 2005 2006 2007 2008
2.2
2009
3.3
2010
1.9
2011
1.7
2013
3.1
2014
16.6
2015
1.0
2012
Export Volume (000's sqm) Export Value (QAR mn)
0.1 0.1 0.1 0.0 0.1 0.0 0.3 0.0
1.21.7
1.0 0.9
1.8
9.7
0.6
Source: ITC Trademap, Team Analysis
157Manufacture of Structural Metal Products
6.1.3.2.2. Trade by Source and Destination
Imports: The analysis of aluminum doors, windows and partitions imports amounting to 122,756sqm from 2010 to 2015 indicates that China (48%), the UAE (17%), the KSA (9%), the US (4%) and the UK (4%) are the major sources of imports.
Chart 145. Key Sources of Aluminum Doors, Windows and Partitions Imports, 2010 to 2015
China
UAE
Saudi ArabiaUSA
UK
Rest of the World
2010 2011 2012 2013 2014 2015
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Source: ITC Trademap, Team Analysis
Trends in imports during 2010 to 2015 indicate that the share of China peaked in 2012 at 79.3% and steadily declined to 30.9% in 2015. During this period, the share of the UAE in imports into Qatar increased from 7.1% in 2012 to 33.5% in 2015 to emerge as the leading exporter to Qatar. During 2010 to 2015, Saudi Arabia, the US and the UK had small share of imports.
Exports: The analysis of aluminum doors, windows and partitions exports amounting to a total of 27,633sqm from 2010 to 2015 indicates that Kuwait (84%), the KSA (7%), the UAE (7%), Tunisia (1%) and Oman (0.3%) are the major sources of exports.
Chart 146. Key Destinations of Aluminum Doors, Windows and Partitions Exports, 2010 to 2015
KuwaitSaudi Arabia
TunisiaOman
Rest of the World
UAE
2010 2011 2012 2013 2014 2015
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Source: ITC Trademap, Team Analysis
158 Manufacture of Structural Metal Products
The small quantity of exports of aluminum doors, windows and partitions from Qatar has been to nearby countries, such as Kuwait and the UAE, which have emerged as the leading destination for exports. During 2010 to 2015, the share of the UAE decreased from 61.7% in 2011 to 1.3% in 2015 and that of Kuwait increased from 17.8% in 2012 to 93.9% in 2015.
6.1.3.2.3. Share of Imports in Domestic Consumption
Imports: The share of imports in Qatar’s aluminum doors, windows and partitions market declined from 78% in 2001 to 48% in 2004. However, the share of imports as a percentage of domestic consumption witnessed a gradual year-on-year increase. After the global economic slowdown of 2008 and 2009, the share of imports further grew to reach 90% to 94% during 2009 and 2012, due to a preference for inexpensive imports. As the economy recovered, the share of imports reduced marginally in 2012 and 2014 and reached 85% in 2015.
Chart 147. Qatar’s Aluminum Doors, Windows and Partitions Imports Vs Domestic Sales, 2001 to 2015
Domestic Sales Imports % Share of Imports
Tho
usan
d s
qm
% s
hare
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
2001 2002 20082003 2004 2005 2006 2007 2009 2010 2011 2012 2013 2014 2015
24 2454 34 35 17 23 20 24 25
36 27 29 22 33
107
5287
170 158 176
381
101163 135
46 40 42 46 57
161
86122
188172
193
404
121
187160
78%
67% 67%
48%
58%
66%61%
71%
90% 92% 91% 94%
83%87% 85%
0
50
100
150
200
250
300
350
400
450
500
Source: Team Analysis, ITC Trademap
6.1.3.2.4. Assessment of Export Opportunities
Qatar produces aluminum profiles and sections that are the major raw materials consumed in aluminum doors, windows and partitions. However, the overall cost of production in Qatar is high as compared to other GCC countries. Therefore, export opportunity for aluminum doors, windows and partitions is low. Analysis of export data indicates that across the 2001 and 2015 period, exports constituted only about 9.5% of the domestic production.
6.1.3.2.5. Trade Forecast
Imports: As the percentage of the share of imports has increased over the years, considering the near-term trends, the import forecast for aluminum doors, windows and partitions indicates that about 88% of the market requirements (in quantity terms) will be met by imports. Primary interviews with fabricators indicate that imports are 20% to 25% cheaper than domestic production. Imports are likely to range from 137,480sqm in 2016 to 154,621sqm in 2026.
159Manufacture of Structural Metal Products
Source: Team Analysis, ITC Trademap
Exports: The export forecast indicates that exports have a small opportunity as about 9.5% of the domestic production may be exported. Exports are likely to range from 1,975sqm in 2016 to 2,384qm in 2026.
Chart 149. Qatar’s Aluminum Doors, Windows and Partitions Export Forecast, 2015 to 2026
% s
hare
Tho
usan
d s
qm
2015 2016e 2017F 2018F 2019F 2020F 2021F 2022F 2023F 2024F 2025F 2026F
Domestic Sales Imports % Share of Imports
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
19 19 19 20 20 21 21 22 22 22 23
135 137 134 137 140 144 146 149 150 152 153 155
160 156 153 155 160 164 167 170 172 174 176 177
84.5%87.9% 87.6% 87.2%
0
25
50
75
100
125
150
175
200
225
250Chart 148. Qatar’s Aluminum Doors, Windows and Partitions Import Forecast, 2015 to 2026
Domestic Sales Exports Exports as % of domestic production
Tho
usan
d s
qm
% s
hare
2015 2016e 2017F 2018F 2019F 2020F 2021F 2022F 2023F 2024F 2025F 2026F
0%5%10%15%20%25%30%35%40%45%50%55%60%65%70%75%
0
5
10
15
20
25
30
35
40
45
25 19 19 19 20 20 21 21 22 22 22 23
16.60
1.98 1.94 1.98 2.05 2.11 2.17 2.22 2.27 2.31 2.35 2.38
9.5% 9.5% 9.5% 9.5% 9.5% 9.5% 9.5% 9.5% 9.5% 9.5% 9.5%
Source: Team Analysis, ITC Trademap
160 Manufacture of Structural Metal Products
6.1.4. Aluminum Railing and FencingAluminum staircase railings are similar to steel railings and are installed along staircases to offer support to people as they climb up and down. These are made from aluminum sections or profiles and can be combined with other materials, such as glass and stainless steel. Some staircase railings have intricate design patterns that are usually painted in golden color and made from cast aluminum.
Aluminum fencing is used along the boundary walls of real estate developments and along road medians and edges of footpaths. It is made from the sections or profiles of aluminum and is fixed to the wall or to the ground.
6.1.4.1. Demand-Side Analysis
6.1.4.1.1. Historical and Current Market Size
The market size for aluminum staircase railings and fencing has followed the real estate development trends as this product can be used in all types of projects.
Chart 150. Qatar’s Aluminum Doors, Windows and Partitions Selling Prices Forecast, 2015 to 2026
QA
R p
er s
qm
Domestic price (QAR/sqm) Import price (QAR/sqm)
0
100
200
300
400
500
600
700
800
900
2015
586
462
2016e
600
473
2017F
616
486
2018F
633
500
2019F
650
513
2020F
666
525
2021F
681
538
2022F
698
551
2023F
715
564
2024F
733
578
2025F
751
593
2026F
770
607
Source: Team Analysis, Primary Interviews
6.1.3.3. Pricing Analysis
Selling prices for aluminum doors, windows and partitions are quoted on per sqm basis and vary as per the size, design, color and other specifications. Currently, the 2016 domestic prices for aluminum doors, windows and partitions are in the range of QAR450 and QAR750 per sqm (average of QAR600 per sqm). On an average, imports are 20% to 25% cheaper than domestic production. Considering the inflation rates in Qatar, average prices are expected to reach QAR770 per sqm in 2026 for domestic production and QAR607 per sqm for imports.
161Manufacture of Structural Metal Products
Chart 151. Qatar’s Aluminum Railing and Fencing Demand, 2001 to 2015
Market Size (Volume, 000's linear meter) Market Size (Value, QAR mn)
3350
60 70 82
142
214
146112
57 50 65 5982
1074.05.5
7.0
10.011.8
26.623.5
27.7
20.7
14.513.1
17.1 16.7
21.4
28.0
2001 2002 20082003 2004 2005 2006 2007 2009 2010 2011 2012 2013 2014 2015
Tho
usan
d s
qm
QA
R m
n
0
50
100
150
200
250
0
5
10
15
20
25
30
Source: Team Analysis, ITC Trademap, MDPS Annual Bulletin of Building Permits and Competed Building Statistics
107
64 63 64 66 68 70 71 73 74 75 76
28.0
16.1 16.2 17.018.0 19.0 19.9 20.9 21.8 22.7 23.6 24.5
Market Size (Volume, 000's linear meter) Market Size (Vaalue, QAR mn)
Tho
usan
d li
near
met
er
QA
R m
n
2015 2016e 2017F 2018F 2019F 2020F 2021F 2022F 2023F 2024F 2025F 2026F0
20
40
60
80
100
120
0
3
6
9
12
15
18
21
24
27
30
The market size grew from 32,812 linear meter (QAR4mn) in 2001 to a peak of 213,763 linear meter (QAR23.5mn) in 2007, at a CAGR of 37%. The slowdown of 2008–2009 led to subdued real estate development activity in the subsequent years that reduced the market size to 49,701 linear meter (QAR13.1mn) in 2011. Then, the market recovered and is estimated to have reached 106,853 linear meter (QAR28mn) in 2015.
6.1.4.1.2. Demand Drivers
Demand for aluminum staircase railings and fencing is driven by requirements arising from real estate development projects that include various types of asset classes, such as villas, multi-story residential buildings, commercial developments, public buildings and industrial facilities. Civil contractors undertaking construction contracts comprise the customer segment.
Architects and interior designers who design staircase railings and fencing are the key influencers.
6.1.4.1.3. Demand Forecast
The decline in oil prices in 2014 and 2015 is likely to affect the development of new real estate projects that are either planned or underway. The market size is estimated to have reduced by 39.8% from 106,853 linear meter in 2015 to 64,369 linear meter in 2016.
The aluminum staircase railings and fencing market is expected to grow from 64,369 linear meter in 2016 to an estimated 75,745 linear meter in 2026, registering a CAGR of 1.6%. In value terms, the market would grow at a CAGR of 4.3% from QAR16.1mn in 2016 to reach QAR24.5mn in 2026.
Chart 152. Qatar’s Aluminum Railing and Fencing Demand Forecast, 2015 to 2026
Source: Team Analysis, ITC Trademap, MDPS Annual Bulletin of Building Permits and Competed Building Statistics
162 Manufacture of Structural Metal Products
6.1.4.2. Trade Analysis
6.1.4.2.1. Historical Trade Analysis
Imports: The analysis of historical import data from 2001 indicates that imports have grown as per the real estate development trends in Qatar. Imports increased from 12,501 linear meter in 2001 to 75,605 linear meter (QAR8mn) in 2008. From 2010, imports reduced substantially and reached 24,812 linear meter (QAR4mn) in 2015.
Chart 153. Qatar’s Aluminum Railing and Fencing Imports, 2001 to 2015
Import Volume Import Value
2001 2002 20082003 2004 2005 2006 2007 2009 2010 2011 2012 2013 2014 2015
Tho
usan
d li
near
met
er
QA
R m
n
13 2332
2234 33
14476 71
23 21 20 1728 25
0.81.1
2.41.5
2.63.4
6.6
8.0
10.0
5.7 5.44.8 4.9
5.8
4.0
0
20
40
60
80
100
120
140
160
0.0
2.0
4.0
6.0
8.0
10.0
12.0
Source: ITC Trademap, Team Analysis
Exports: Qatar’s exports aluminum railing and fencing products during 2001 to 2008 were negligible. From 2009, Qatar’s exports of aluminum railing and fencing had been irregular and concentrated around 2011 to 2012. Export in 2015 was valued at QAR0.19mn (678 linear meter).
Chart 154. Qatar’s Aluminum Railing and Fencing Exports, 2001 to 2015
1.3 1.4
8.2
3.1
1.20.7
0.3 0.4
2.2
0.8
0.30.2
Export Volume Export Value
2001 2002 20082003 2004 2005 2006 2007 2009 2010 2011 2012 2013 2014 2015
Tho
usan
d li
near
met
er
QA
R m
n
0.0
0.5
1.0
1.5
2.0
2.5
0
1
2
3
4
5
6
7
8
9
Source: ITC Trademap, Team Analysis
163Manufacture of Structural Metal Products
UAE
UK
ChinaSaudi Arabia Germany
Rest of the World
2010 2011 2012 2013 2014 2015
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
6.1.4.2.2. Trade by Source and Destination
Imports: The analysis of aluminum staircase railings and fencing imports amounting to 133,226 linear meters from 2010 to 2015 indicates that the UAE (51%), the UK (15%), China (10%), the KSA (5%) and Germany (3%) are the major sources of imports.
Chart 155. Key Sources of Aluminum Railing and Fencing Imports, 2010 to 2015
Source: ITC Trademap, Team Analysis
The UAE has been the dominant source of imports of aluminum staircase railings and fencing products into Qatar. Its share increased from 29.4% in 2010 to 57.2% in 2015. Other countries such as the UK, Saudi Arabia, China and Germany have had relatively minor shares of imports into Qatar.
Exports: The analysis of aluminum staircase railings and fencing exports amounting to 14,614 linear meters from 2010 to 2015 indicates that the KSA (49%), the UAE (36%), Lebanon (8%), Bahrain (5%) and Kuwait (0.8%) are the key destinations for exports.
Chart 156. Key Destinations of Aluminum Railing and Fencing Exports, 2010 to 2015
Saudi Arabia
UAE
Lebanon
Bahrain Kuwait
2010 2011 2012 2013 2014 2015
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Source: ITC Trademap, Team Analysis
Exports of aluminum staircase railings and fencing have been to nearby countries, such as the UAE, Saudi Arabia, Kuwait and Bahrain. Saudi Arabia was the leading destination for exports from 2010 to 2013, while the UAE was the popular destination in 2014 and 2015.
6.1.4.2.3. Share of Imports in Domestic Consumption
Imports of aluminum staircase railings and fencing fluctuate depending on the prevailing market conditions. During the peak of construction activity between 2007 and 2009, imports accounted for an average of 61% of the market. However Qatar’s dependence on imports reduced from 40% in 2010 to reach 23% in 2015.
164 Manufacture of Structural Metal Products
Chart 157. Qatar’s Aluminum Railing and Fencing Imports Vs Domestic Sales, 2001 to 2015
Domestic Sales Imports % Share of Imports
20 27 2848 48
108 69 7040 34 29
45 42 5482
1323
3222 34
33
14476
71
23 2120 17
28
2538%
46%
53%
31%
41%
24%
68%
52%
64%
40%42%
31% 28%34%
23%
Tho
usan
d li
near
met
er
% s
hare
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
2001 2002 20082003 2004 2005 2006 2007 2009 2010 2011 2012 2013 2014 2015
0
50
100
150
200
250
Source: Team Analysis, ITC Trademap
6.1.4.2.4. Assessment of Export Opportunities
Qatar produces aluminum profiles and sections that are the major raw materials consumed in aluminum staircase railings and fencing. However, the overall cost of production in Qatar is high as compared to other GCC countries. Therefore, export opportunity for aluminum staircase railings and fencing products is low. Analysis of export data indicates that across the 2001 and 2015 period, exports constituted only about 2.3% of the domestic production.
6.1.4.2.5. Trade Forecast
Imports: As the percentage of the share of imports has fallen over the years, considering the near-term trends, the import forecast for aluminum staircase railings and fencing indicates that about 36% of the market requirements (in quantity terms) will be met by imports. Primary interviews with railings and fencing fabricators indicate that imports are 30% to 35% cheaper than domestic production. Imports are likely to range from 23,663 linear meter in 2016 to 26,614 linear meter in 2026.
Chart 158. Qatar’s Aluminum Railing and Fencing Import Forecast, 2015 to 2026
Domestic Sales Imports % Share of Imports
82 41 40 41 42 44 45 46 47 48 48 49
25
24 23 24 24 25 25 26 26 26 26 27
23%
37% 37% 37% 36% 36% 36% 36% 36% 35% 35% 35%
Tho
usan
d s
qm
% s
hare
2015 2016E 2017F 2018F 2019F 2020F 2021F 2022F 2023F 2024F 2025F 2026F
0
20
40
60
80
100
120
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Source: Team Analysis, ITC Trademap
165Manufacture of Structural Metal Products
Exports: The export forecast indicates that exports may have a minor opportunity as about 2.3% of the domestic production is likely to be exported. Exports are most likely to be limited to rare opportunities, e.g., Qatari civil contractors winning international projects and planning to source from Qatar-based fabricators. Exports are likely to range from 965linear meter in 2016 to 1,165 linear meter in 2026.
Chart 159. Qatar’s Aluminum Railing and Fencing Export Forecast, 2015 to 2026
Domestic Sales Exports Exports as % of domestic production
Tho
usan
d li
near
met
er
% s
hare
0%
5%
10%
15%
20%
25%
30%
2015 2016E 2017F 2018F 2019F 2020F 2021F 2022F 2023F 2024F 2025F 2026F
0
10
20
30
40
50
60
70
80
90
82 41 40 41 42 44 45 46 47 48 48 49
0.66
0.96 0.95 0.97 1.00 1.03 1.06 1.09 1.11 1.13 1.15 1.16
0.8%2.3% 2.3% 2.3% 2.3% 2.3% 2.3% 2.3% 2.3% 2.3% 2.3% 2.3%
Source: Team Analysis, ITC Trademap
6.1.4.3. Pricing Analysis
The selling prices of aluminum staircase railings and fencing are quoted on per linear meter basis and vary as per the design, size, paint color, type of infills (glass, stainless steel) and other specifications. Currently, the 2016 domestic prices are in the range of QAR250 and QAR 450 per linear meter (average of QAR300 per linear meter). On an average, imports are 30% to 35% cheaper than domestic production. Considering the inflation rates in Qatar, the average prices are expected to reach QAR385 per linear meter in 2026 for domestic production and QAR211 per linear meter for imports.
Chart 160. Qatar’s Aluminum Railing and Fencing Selling Prices Forecast, 2015 to 2026
QA
R p
er li
near
met
er
2015
Domestic price Import price
0
50
100
150
200
250
300
350
400
450
293
161
2016E
300
164
2017F
308
169
2018F
317
174
2019F
325
178
2020F
333
182
2021F
341
187
2022F
349
191
2023F
358
196
2024F
367
201
2025F
376
206
2026F
385
211
Source: Team Analysis, Primary Interviews
166 Manufacture of Structural Metal Products
6.1.5. Supply-Side Analysis
6.1.5.1.1. Market Structure
The structure of Qatar’s architectural aluminum fabrication market that comprises about 70 firms is fragmented with the large-sized players constituting about 39.3% share of the market. Based on the capacities of the firms, they can be classified as large, medium and small. Most large- and medium-sized architectural aluminum fabrication firms have capabilities to undertake fabrication of all types of architectural aluminum products, such as aluminum and glass works, sheet cladding, doors, windows and partitions, staircase railings and fencing, while small firms are restricted to less-intensive fabrication works and assembly of imported aluminum and glass works.
Chart 161. Qatar’s Architectural Aluminum Fabrication Market Structure and Capacity Utilization
22.8%Small
37.9%Medium
39.3%Large
Large Medium Small
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
%sqm
Installed capacity (sqm) Capacity Utilization (%)
0
500,000
1,000,000
1,500,000
2,000,000
1,200,000
1,350,000
750,000
70.0%
60.0%
65.1%
Source: Team Analysis, Primary Interviews, MDPS Annual Bulletin of Industry and Energy Statistics 2015
Small-sized Firms
Based on insights from primary interviews, these firms have an installed capacity of not more than 15,000sqm per annum. These units have less than 10 employees and their capacity utilization is 65.1%. Small companies mainly focus on doors and windows, railings and fencing, and assembly of imported aluminum and glass works. Qatar has 50 such firms that collectively account for 23% share of the market.
Medium-sized Firms
Qatar’s top-5 architectural aluminum fabrication firms form the group of large-sized firms. They collectively constitute 39.3% share of the market in terms of quantity. Furthermore, in terms of products and services, the leading players have capabilities to manufacture all types of aluminum and glass works, sheet cladding, doors, windows and partitions, staircase railings and fencing. Average capacity utilization of large firms is 70%.
Large-sized Firms
There are 15 medium-sized firms, each having an average installed capacity of over 15,000sqm per annum and less than 240,000sqm per annum. The medium-sized firms collectively have 37.9% share of the market in volume terms and their average capacity utilization is 60%.
167Manufacture of Structural Metal Products
Table 17. Architectural Aluminum Fabrication Market Structure Snapshot
Architectural Aluminum Fabrication Units Large Medium Small Total
Number of players Number 5 15 50 70
Capacity sqm/month 20,000 7,500 1,250
Capacity per category 1,200,000 1,350,000 750,000 3,300,000
Avg. Capacity utilisation % 70.0% 60.0% 65.1% 65%
Sales per category 840,000 810,000 488,320 2,138,320
Market share % 39.3% 37.9% 23% 100%
6.1.5.1.2. Profiling of Key Domestic Players
Table 18. Architectural Aluminum Fabrication: Key Domestic Players
Company Year of establishment Products Installed capacity (sqm/pa)
AluTech 1995
• Curtain walls• Structural glazing• Cladding• Glass doors• Auto/revolving doors• Fire-rated doors with glass
500,000
Specialized Aluminum and Steel Company (SASCO)
1983
• Doors and windows• Partitions and curtain walls• Structural glazing• Cladding• Skylights and domes
400,000
Technical Glass And Aluminium Company
1989
• Curtain walls• Doors and windows• Glazed screens,• Shop fronts• Canopies• Skylights• Sunshades• Balustrades• Hand railings• Fencing
300,000
Jafco Aluminum and Steel Co
2004
• Curtain walls• Cladding• Doors and windows• Skylights and domes Partitions• Handrails
250,000
Alu Nasa Company 1992
• Doors and windows• Cladding• Curtain walls• Skylights• Rolling shutters• Grills• Auto/revolving doors• Handrails
250,000
168 Manufacture of Structural Metal Products
Company Year of establishment Products Installed capacity (sqm/pa)
Khalory Aluminium Factory 1976
• Doors and windows• Kitchen cabinets• Big store cabinets• Carpentry
60,000
Khalid Aluminium Co. 1965
• Skylights• Cladding• Partitions• Doors and windows• Kitchen cabinets
60,000
Union For Steel And Aluminium
1977
• Curtain walls• Doors and windows• Kitchen cabinets• Cladding• Partitions
60,000
Al Shaheen Aluminium Factory
2005
• Doors and windows• Joinery• Kitchens• Domes• Internal partitions
20,000
Ismail Bin Ali Aluminium 1982
• Curtain walls• Cladding• Composite panels• Spider systems, • Glazing• Sliding and revolving doors
20,000
Al Adala Gulf Aluminium And Carpentry
1986• Doors and windows• Kitchen cabinets• Big store cabinets
20,000
6.1.5.1.3. Business Model Analysis
The architectural aluminum fabrication market is dominated by large players that have the capacity and capability to focus on a varied mix of products, projects and customers. Large players typically target large project works that include doors, windows, partitions, curtain walls, structural glazing, sheet cladding, skylights and domes. These are high-volume projects (average order size: QAR50 to QAR100mn). Being well-established players, large-sized firms have a competitive advantage over other players in terms of financial strength, local expertise as well as access to major projects across the country.
The medium-sized players mainly target small-scale projects (average order size: QAR5mn to QAR10mn) involving doors, windows, partitions, curtain walls and sheet cladding since they do not have sufficient funds, capacity (manpower and
machinery) to handle large-scale projects. Small players focus on singular projects involving fabrication of doors and windows, cladding, rolling shutters, grills, handrails and fencing (average order size: QAR1mn to QAR5mn). Small and medium players also undertake assembly of imported architectural aluminum fabricated products, such as curtain walls, doors, windows, partitions, structural glazing and sheet cladding.
Given the low-entry barriers, widespread applications within architectural aluminum fabrication and a large market size, this has been an attractive sector for Qatari entrepreneurs. The market is currently oversupplied, with several firms operating in the market and each targeting the same project; competition to win contracts is intense.
169Manufacture of Structural Metal Products
6.1.5.1.4. Domestic Production Competitiveness
Key factors that influence the competitiveness of architectural aluminum fabrication include raw material, labor, market size and the impact of competition.
Raw Material: Qatar has local production of aluminum extrusions used in several applications; however, it does not have facilities for glass and an aluminum rolling plant for aluminum sheet. The domestic raw material production capacity for glass and aluminum sheets is underdeveloped in the country; therefore, manufacturers in Qatar depend on imports to meet their raw material needs.
Our primary research indicates that the raw material is procured from the UAE, Saudi Arabia, Belgium, China and Turkey. Expensive raw material significantly impacts the cost of domestically produced finished goods.
High Operational Expenses: Our Primary interviews indicate that the operational costs are significantly higher in Qatar due to higher labor costs and rent than in the nations exporting to Qatar — Kuwait, the UAE, Saudi Arabia, India, China, Turkey, etc. This adversely affects the price competitiveness of domestic production.
235 Team Analysis
Time to Market: According to industry players, procuring raw material is time consuming, which leaves them with very little time to fabricate and deliver finished products to customers. Raw material inventory requirement increases since manufacturers either have to procure raw materials in advance that add to the inventory costs or have to purchase raw materials at current market rates, which may be higher than the quotations submitted for job works, adversely affecting their price competitiveness.
Number of Players: The architectural aluminum fabrication market is fragmented with top-5 players capturing about 39.3% of the market. Medium and small players typically target smaller scale projects than the market leaders. The market being oversupplied is characterized by fierce competition and price sensitivity.
6.1.6. Demand–Supply AnalysisConsidering the 70 firms operating in the market, the installed capacity is 3,300,000sqm per annum. This does not include assumptions for new players having plans to enter the market that have not been announced so far. As per market size estimates (including imports projection), the demand–supply gap indicates an oversupply of 1,553,684sqm per annum in 2020 to 1,337,851sqm per annum in 2026.
Chart 162. Qatar’s Architectural Aluminum Fabrication Demand-Supply Analysis, 2015 to 2026
Architectural Aluminum Fabrication Market Size (Total Demand, incl. imports) 000s sqmSupply (Domestic installed capacity) 000s sqm Demand Supply Gap
Tho
usan
d M
T
2015 2016E 2017F 2018F 2019F 2020F 2021F 2022F 2023F 2024F 2025F 2026F(2,000)
(1,000)
0
1,000
2,000
3,000
4,000
3,09
0
1,63
6
1,60
5
1,63
9
1,69
5
1,74
6
1,79
1
1,83
3
1,86
9
1,90
5
1,93
3
1,96
2
3,30
0
3,30
0
3,30
0
3,30
0
3,30
0
3,30
0
3,30
0
3,30
0
3,30
0
3,30
0
3,30
0
3,30
0
(210)
(1,664) (1,695) (1,661) (1,605) (1,554) (1,509) (1,467) (1,431) (1,395) (1,367) (1,338)
Source: Team Analysis, Primary Interviews, MDPS Annual Bulletin of Industry and Energy Statistics 2015, ITC Trademap
170 Manufacture of Structural Metal Products
6.1.7. Regulatory AnalysisQatar Construction Specification 2014: As architectural aluminum fabrication products are used in the construction sector, their production, installation and usage are mainly regulated by the following sections of Qatar Construction Specifications (QCS) 2014.
a) QCS 2014 Section 16: Structural Works This section has general instructions and regulations related to materials, drawing, fabrication, welding, bolting, accuracy of fabrication, erection, accuracy of erected metal work and protected treatment.
a) QCS 2014 Section 17: Metal Work This section has general instructions and regulations related to material classification, metal doors and windows, architectural metalwork, light metal support, cladding support and workmanship.
In addition to the above, architectural aluminum fabrication units are expected to be familiar with other relevant sections of the QCS that regulate construction activities having an interface with aluminum fabrication products. These sections include section 13 (Masonry), section 14 (Roofing), section 4 (Foundation and retaining structures) and section 5 (Concrete).
Ministry of Environment: Aluminum fabrication units need to be approved by the Ministry of Environment.
Civil Defense Department (Ministry of Interior): All building material products need an approval from the Civil Defense Department (Ministry of Interior) as per Emiri Decree No. 9/2012. Aluminum fabrication units have to comply with applicable fire safety norms.
ISO Certification: Obtaining ISO certifications (Quality 9001, OHSAS 18001 and Environment 14,001) are vital for tendering purposes.
Apart from the above, all prospective entrepreneurs need to follow applicable laws on company registration and industrial license to obtain land and building permissions for setting up an aluminum fabrication facility in Qatar.
171Manufacture of Structural Metal Products
6.1.8. SWOT Analysis and Michael Porter’s Five Forces analysis
6.1.8.1. SWOT Analysis
Figure 20: Architectural Aluminum Fabrication SWOT Analysis
Summary:
In the medium to long term, the strengths and the opportunities outweigh the weaknesses and threats due to large market size, pipeline of upcoming projects in Qatar, fragmented customer base and the localized nature of the products.
• Upcoming real estate projects across asset classes, such as villas, multi-story buildings and commercial buildings.
• Opportunity to use creative and architectural aspects to differentiate
• Opportunity to differentiate by focusing on a combination of products.
• Addressable market of QAR893mn in 2016 growing at a CAGR of 4.4% in value terms, to reach QAR1,375mn in 2026.
• Wide range of products, such as doors, windows, partitions, curtain walls, structural glazing, sheet cladding, handrails, fencing, skylights and domes.
• Domestic players have been able to acquire a majority share in products, such as aluminum and glass works, aluminum sheet cladding, staircase railings and fencing.
STRENGTHS OPPORTUNITIES
• Low-priced imports adversely impacting the salability of domestic production in times of economic slowdown.
• Intense rivalry between fabricators threatening new entrants
• Highly price-sensitive market
• In case of products such aluminum doors, windows and partitions, more than 80% of the market is served by imports.
• Dependence on imports for raw materials affecting price competitiveness
THREATSWEAKNESSESSWOT
Architectural Aluminum Fabrication
172 Manufacture of Structural Metal Products
6.1.8.2. Michael Porter’s Five Forces Analysis
Figure 21: Michael Porter’s Five Forces Model (Architectural Aluminum Fabrication)
High:
• Architectural aluminum fabrication market is highly competitive with several players operating in the market.
• Intense competitive rivalry ensures that price and relationship are the key deciding factors in securing a job order.
COMPETITIVE RIVALRY
High:
• Architectural aluminum fabrication is neither capital-intensive nor technology-intensive.
• Creative designs for architectural products, can be achieved by hiring suitable staff. Thus, the threat of new entry is high.
THREAT OF NEW ENTRY
Medium:
• Despite a significant number of fabricators operating in the business, the bargaining power of consumers is medium as there is scope for product differentiation based on design and creative inputs.
BARGAINING POWER – CONSUMERS
High:
• Part of the raw materials for architectural aluminum fabrication (e.g., aluminum sheets, glass) are not manufactured in Qatar; hence, manufacturers have to rely on imports.
• Suppliers have high bargaining.
BARGAINING POWER – SUPPLIERS
Low:
• The boundaries within which wood, steel, glass and aluminum can be used architectural products are well set. Hence, it is unlikely for architectural aluminum fabrication products to be substituted by other materials.
THREAT OF SUBSTITUTION
173Manufacture of Structural Metal Products
6.2. Critical Success FactorsCritical Success Factors include the following:
Figure 22: Critical Success Factors - Architectural Aluminum Fabrication
1 Access to Raw Material
Raw material forms an important part of the costs incurred by an architectural aluminum fabrication unit. Costs related to these are influenced by global trends in the commodity prices. Entrepreneurs are unlikely to have any control over raw material prices. Hence, competitiveness in procurement and compliance with good practices in raw material and inventory management, such as economic order quantity and just-in-time methods, is essential
3 Access to Markets and Strategic Linkages with Civil Contractors
Entrepreneurs need to develop strong relationships and strategic linkages with civil contractors focusing on high-rise buildings and commercial real estate projects as this would help in sustaining a steady order book.
5 Technical Know-how
Technical knowledge of fabricators, workforce and sales team is important to execute highly complex projects with optimum efficiency and minimal errors. It enables fabricators to stay ahead of the competition as well as deliver world-class services to their customers.
7 Investment in Machinery
Companies should invest in modern machinery, experienced welders, designers and project managers. This would enable them to deliver demanding projects and gain an edge over the competition.
2 Access to Skilled Laborers
Creativity and workmanship are the key tools for differentiating products in a competitive market. Hiring skilled staff, such as designers, welders and supervisors, is highly important.
4 Operational Efficiency
Efficiency in day-to-day operations, such as fabrication, supervision and other shop floor activities, can help in cost optimization. Compliance with ISO norms for Quality (ISO 9001), OHSAS (ISO 18,001) and Environment (ISO 14001) would lead to standardization of procedures, put in place a system of checks and balances, and help achieve compliance with regulatory norms. This can be a key tool in achieving efficiency in operations.
6 Customer Service
Thorough understanding of the clients’ requirements is crucial in gaining the trust of the customers. In case of the villa segment, the fabricator is in direct contact with the end-user, i.e., the residents of the villa. A delighted end-user can help spread word-of-mouth goodwill, which can prove to be highly beneficial in a competitive market.
174 Manufacture of Structural Metal Products
High HighHigh High High
Medium Low
Access to raw material
Access to skilled labourers
Operational efficiency
Access to markets and strategic linkages
Technical know-how
Customer service
Investment in machinery
6.3. OutlookThe architectural aluminum fabrication forms a sizable portion (21.4%) of the structural metal products sector. Qatar’s growing real estate sector offers opportunities for new units in the architectural aluminum fabrication market in products such as aluminum and glass works, aluminum sheet cladding, staircase railings and fencing.
The market is expected to grow at a CAGR of 4.4% from QAR893mn in 2016 to an estimated QAR1,375mn in 2026. A large market size and a moderate pace of growth offer an opportunity for new players to tap into 32,738sqm worth of average incremental opportunity every year. Subject to competitive challenges, opportunities exist for two medium-sized players (5,000sqm per month installed capacity, running at 80% utilization) dedicated to architectural aluminum fabrication works, to enter the market every three years.
In terms of challenges, the market is likely to remain significantly competitive and price sensitive. Heavy dependence on imports for procurement of raw materials and high operational expenses (salaries, rent, etc.) as compared to those in other countries such as the UAE and the KSA would limit export potential to rare opportunities. Imports are likely to remain cheaper as compared to domestic production and further heighten the challenges.
In the medium to long term, the strengths and the opportunities outweigh the weaknesses and threats due to large market size, upcoming projects pipeline in Qatar, fragmented customer base and the localized nature of the product.
175Manufacture of Structural Metal Products
176 Manufacture of Structural Metal Products
1. Al Shahin Metal Industries. Company Website. http://www.alshahin.com/ (accessed in July 2016)
2. Al Wadi Contracting and Steel. Company Website. www.alwadicontracting.net (accessed in August 2016)
3. Arcelor Mittal. “From ore to steel” available on http://corporate.arcelormittal.com/who-we-are/from-ore-to-steel (accessed in September 2016)
4. BlueScope. 2015. “Annual Report 2014-15” available on https://s3-ap-southeast-2.amazonaws.com/bluescope-corporate-umbraco-media/media/1905/bluescope-annual-report.pdf (accessed in August 2016)
5. BQ Magazine (Business in Qatar and Beyond). 2015. “Rethinking Food” available on http://www.bq-magazine.com/economy/2015/03/qatar-food-security (accessed in October 2016)
6. BSI-Steel (Building System Integration Ltd). Company website. “Pre-engineered building” available on http://www.bsi-steel.com/02_about_us/about_bsi.html (accessed in July 2016)
7. CBQ (Commercial Bank of Qatar). 2012.“Qatar Construction Sector” available on www.ifpinfo.com/getpdf.php?pdf=Qatar%20Construction%20Sector.pdf (accessed in August 2016)
8. DANA Steel Processing. Company Website. http://www.danagroups.com/products/pre-engineered-steel-buildings-peb-uae/ (accessed in July 2016)
9. Database. Bloomberg. http://www.bloomberg.com/markets/commodities (accessed in July 2016)
10. Database. GOIC (Gulf Organization for Industrial Consulting). “Gulf Statistical Profile from 2011 to 2015” available on http://www.goic.org.qa/GOICCMS/Index.html (accessed in July 2016)
11. Database. Trademap. Import & Export data” available on http://trademap.org/Index.aspx (accessed in July 2016)
12. Designing Buildings Ltd. “Curtain wall systems” available on http://www.designingbuildings.co.uk/wiki/Curtain_wall_systems (accessed in September 2016)
13. EMIS (Euromoney Institutional Investor Company). 2015. “Construction Sector MENA” available on https://www.emis.com/sites/default/files/EMIS%20Insight%20-%20MENA%20Construction%20Sector%20Report.pdf (accessed in September 2016)
14. Encyclopedia Britannica. “Skylight” available on https://global.britannica.com/technology/skylight-architecture (accessed in September 2016)
15. Eversendai. Company Website. http://www.eversendai.com (accessed in August 2016)
16. Frijns Qatar. Company Website. http://www.frijnsqatar.com (accessed in August 2016)
7. References
177Manufacture of Structural Metal Products
17. Gulf Steel. Company Website. http://www.gulf-steel.com/ (accessed in August 2016)
18. HBK Contracting Company. Company Website. http://hbkcontracting.com (accessed in August 2016)
19. International Building Systems Factory (IBSF). Company Website. www.ibsf.com (accessed in September 2016)
20. IronMount Engineering. Company Website. www.ironmountengineering.com (accessed in August 2016)
21. ISSB (International Steel Statistics Bureau). 2015. “Global Overview” available on http://www.issb.co.uk/news/news/global.html (accessed in July 2016)
22. Kirby International. Company Website. www.kirbyinternational.com/about-us/company-profile.html (accessed in August 2016)
23. Mabani Steel. Company Website. http://www.mabanisteel.com/ (accessed in August 2016)
24. Mammut Building Systems. Company Website. http://mbs.ae/MammutWebSite/html/index.asp (accessed in July 2016)
25. Manateq. Company Website https://www.manateq.qa/en-gb/invest/specialeconomiczones/Pages/default.aspx (accessed in August 2016)
26. MDPS (Ministry of Development Planning and Statistics). “Annual Bulletin of Industry & Energy Statistics from 2001 to 2015” available on http://www.mdps.gov.qa/en/pages/default.aspx (accessed in July 2016)
27. Middle East building Systems FZC. Company Website. http://www.middleeaststeel.com/founder_director.php (accessed in September 2016)
28. Oxford Business Group. 2012. “Bahrain Economy: Serious business: Economic diversification efforts continue to be a top priority” available on http://www.oxfordbusinessgroup.com/overview/serious-business-economic-diversification-efforts-continue-be-top-priority (accessed in September 2016)
29. PEB Steel. Company Website. www.pebsteel.com/about/brief-introduction (accessed in July 2016)
30. Press release: Gulf Business. 2016. “Have low oil prices changed the GCC’s spending patterns?” available on http://gulfbusiness.com/have-low-oil-prices-changed-the-gccs-spending-patterns/#.V7AcSut95D8 (accessed in July 2016)
31. Profiles R. H. Factory. Company Website. http://www.profilesrhf.com/Documents/Steel.pdf (accessed in September 2016)
32. QCS (Qatar Construction Specifications). 2014. (accessed in September 2016)
33. QNB Capital (Qatar National Bank). October 2009. “Qatar Economic Review” available on http://qnb.co.id/img-file/929612Qatar%20Economic%20Review%20October%202009.pdf
34. Ralco Steels. Company Website. http://www.ralcosteels.com/ProductionCapacity.html (accessed in August 2016)
35. Roofings Middle East FZC. Company Website. http://www.roofingsme.com/content.php?content=about-us (accessed in August 2016)
36. Sesab International. Company Website. http://www.sesab.com.sa (accessed in August 2016)
37. Solb 26. Company Website. http://solb26.com (accessed in August 2016)
38. Steel Construction. “Fabrication” available on http://www.steelconstruction.info/Fabrication (accessed in July 2016)
39. Technavio Research. 2016. “Global Pre-Engineered Building Market 2016-2020” available on http://www.technavio.com/report/global-miscellaneous-pre-engineered-building-market (accessed in September 2016)
40. World Bank. 2016. “World Bank Commodities Price Forecast” available on http://pubdocs.worldbank.org/en/764161469470731154/CMO-2016-July-forecasts.pdf (accessed in September 2016)
41. WSA (World Steel Association). 2015. “Steel Statistical Yearbook 2015” available on http://www.worldsteel.org/statistics/statistics-archive/yearbook-archive.html
42. WSA (World Steel Association). 2015. “World Steel in Figures 2015” available on http://www.worldsteel.org/publications/bookshop/product-details.~World-Steel-in-Figures-2015~PRODUCT~World-Steel-in-Figures-2015~.html (accessed in July 2016)
43. WSA (World Steel Association). 2015. “World Steel Short Range Outlook 2015-2016” available on http://www.worldsteel.org/media-centre/press-releases/2015/worldsteel-Short-Range-Outlook-2015-2016.html (accessed in July 2016)
44. Zamil Steel. Company Website. www.zamilsteel.com/peb/en/default.asp?iId=GELKMF (accessed in July 2016)
178 Manufacture of Structural Metal Products
179Manufacture of Structural Metal Products
Disclaimer and Copyright Notice:
The report is being distributed on a complimentary basis. No part of this publication may be reproduced or transmitted in any form by any means, electronic or mechanical, including photocopying and recording, or by any information storage or retrieval system, except as may be permitted, in writing, by QDB.
QDB has taken all reasonable measures to ensure the reliability of the information included in the publication and accepts no liability whatsoever for any direct or indirect losses arising from use of this publication. Any party that obtains access to this publication or a copy and chooses to rely on this report (or any part of it) does so at its own risk.
Doha, Qatar P.O. Box 22789
Tel.: (974) 4430 0000 Fax.: (974) 4435 0433
Email: [email protected] Website: www.qdb.qa
For more information
(974) 5060 6013
About QDBQatar Development Bank (QDB) was founded by Emiri Decree to grow Qatar’s private sector and diversify its economy. His Highness Sheikh Hamad Bin Khalifa Al Thani, the Father Amir, identified these as vital tasks in developing Qatar into a modern state. Since our establishment in 1997, we have been at the forefront of these efforts. We have worked with thousands of Qatari entrepreneurs and enterprises. We have provided investment and guidance to brand-new start-ups and well-established corporations. And we have built a reputation for identifying promising investment opportunities. Our focus is on growing small and medium enterprises in key sectors by offering a number of services through a single window to support their expected growth. Through smart, targeted financing products and advisory support services, QDB is nurturing a sound and sustainable knowledge-based economy for Qatar.