PRICE LISTMAY 20
2013
FlomaticValves and flow control solutions
26385 Flomatic pricelist 13_Danfoss Price List 4/16/13 2:09 PM Page 1
LOOK AT WHAT’S NEW!LOOK AT WHAT’S NEW!
High Quality Valves Built to Last... I www.flomatic.com
WHAT’S N
EW AT
800.833.2040
• New Federal Lead Free Legislation -January 4th, 2014
Congress has passed the first lead free lawknown as the Reduction of Lead inDrinking Water Act, reducing lead from
8% to 0.25% the amount of the lead allowed in "lead free" plumbing fixtures in potable water applications. This is similar to thecurrent laws in the state of California and Vermont. Flomatic has been committed toproviding products that meet low lead content for over 20 years.
• Low Lead Product CertificationMost products in this catalog have been tested and certified by IAPMO, an ANSI accredited third party to comply with the laws. Flomatic introduced the industry’s first unleaded valve, the Enviro Check®, in 1992, which has been recognized as an acceptable material for “lead free*”.
* The wetted surface of this product contacted by consumable water contains less than one quarter of one percent (0.25%) of lead by weight.
• Model 80DI-VFD – Special valve for VFD Controlled PumpsNew special patent-pending submersible pump check valve for use with variable-frequencydrive (VFD) controlled pumps. Standard check valves have a minimum and maximum flowcharacteristic design and will “chatter” and be noisy when a VFD goes to low flow, causingpremature wear and eventual failure. The unique Model 80DI-VFD unit is designed to mini-mize flow losses and hydraulic shocks in the pumping system. It features a standard fusionbonded epoxy coated ductile iron body to support deep set pumps. This new, exclusivepoppet system insures that the valve smoothly and automatically adjusts to flow and isnoiseless at even very low flows.
See Page: 5
• Model 80S6-VFD – 316 Stainless Steel VFD Check A new all 316 Stainless Steel submersible pump check valve for use with variable-frequency drive(VFD) controlled pumps. The poppet assembly is designed for minimum flow loss and givingyears of trouble free service under variable flow. Our unique VFD valve turns the poppet upsidedown and moves the poppet away from the seat bore immediately after opening under flow. Anexclusive precision guided 316 stainless steel poppet system automatically adjusts noiselesslyfrom high to very low flow rates. A special radius seat gives the valve a self-cleaning “one pointswiping action” by the radius-edged custom molded rubber seal disc. All internal parts are madefrom corrosion-resistant materials.
See Page: 9
PATENT PENDING
PATENT PENDING
26385 Flomatic pricelist 13_Danfoss Price List 4/16/13 2:09 PM Page 2
www.flomatic.com II
• Stainless Steel Seat for 2” 80DIThis new seat allows for smooth movement of the guide legs and provides longer corrosionresistant service life. This new 2” model 80DI is longer and allows for an optional break offplug to be installed. It increases performance, reliability and strength of the valve.
See Page: 5
LOOK AT WHAT’ S NEW!LOOK AT WHAT’ S NEW!
• Composite Break-off PlugThe new break-off plug is made from high quality NSF® approved engineered composite material. It will allow users to easily field cut atmarked grooves the standard break-off plug for various size valves.The new composite plug is price competitive to our standard stainlesssteel break-off plug.
See Page: 5
• Model 80MDI-VFD – Male x Female VFD CheckThe new valves feature the patent pending special VFD poppet design that worksunder low flow when the VFD ramps the pump up and down. They feature a malethreaded inlet and a female threaded outlet connection for easy transition fromthe pump discharge end to the pipe.
See Page: 6
High Quality Valves Built to Last...
• New Larger Control Valve SizesThe new Model C² is one of the most flow efficient control valves in its class on themarket according to independent testing. Its unique body design allows for highflow coefficient, Cv* among the leading competitors. Larger sizes NOW available16”, 20”, 24”, 30” and 36”.
See Page: 22-23* (Cv value=flow through valve in gallons per minute at 1 PSI drop)
WHAT’S
NEW AT
800.833.2040
26385 Flomatic pricelist 13_Danfoss Price List 4/16/13 2:09 PM Page 3
THREADED UNLEADED CHECK VALVESTHREADED UNLEADED CHECK VALVES Consult factory for detailed limitations on all products and applications.
SIZEFemale x Female
MODEL100E
Hexed Shape F x F
MODEL 80E
Threaded F x F
–––
4030E4201E*4202E
–––––––––––
MODEL80A E
1/8'' Tap on Inlet
–––
4040E4041E4042E4043E4044E4045E4046E4047E
––––––
MODEL 80CE
4 Taps -1/8''on Inlet,2 - 1/4'' Outlet, 1/8''Outlet
––––
4061E4062E4063E4064E4065E4066E4067E
––––––
MODEL 80BE
1/8'' Tap on Inlet,1/4'' on Outlet
–––
4050E4051E4052E4053E4054E4055E4056E4057E
––––––
MODEL80XBE
2 -1/4'' Taps onOutlet
–––––
7961E7963E7964E7965E
––––––––
MODEL 80HTE
High TemperaturePoppet
5118HTE5159HTE4029HTE4030HTE4031HTE4032HTE4033HTE4034HTE4035HTE4036HTE4037HTE
––––––
MODEL80DI
MODEL80DIVFD
––––
4031DI4032DI403DI793779367938793940894090
––––
MODEL80DIX
–––––––––
7938DIX7939DIX4089DIX4090DIX4091DIX4091T
4092DIX4092T
–––––––
–––
7937VFD7936VFD7938VFD7939VFD4089VFD4090VFD
–
MODEL 80S6
––––
4031S64032S64033S64034S6
–7938S67939S64089S64090XSS4091XSS
–––
1/4"3/8"1/2"3/4"1"
1-1/4"1-1/2"
2"2-1/2"
3"4"6"8"10"
10" Turbo12"
12" Turbo
5118E5159E4029E4030E4031E4032E4033E4034E4035E4036E4037E
––––––
Sta in less S tee l D u c t i l e I r o n®E n v i r o C h e c k
www.flomatic.comHigh Quality Valves Built to Last... III
800.833.2040
Valve Selection GuideValve Selection GuideAPPLICATIONSAPPLICATIONS
CORR
OSIVE
POTABLE
WATER
WASTE
WATER
IRRIGA
TION
ABRA
SIVE
FIBRO
USSTRING
Y
HIGH
PRESSU
RE
HIGH
TEMP
HIGH
VELO
CITY
VISCOU
SSLUR
RY
• SUITABLEu RECOMMENDED
Valve Type Page #Valve Model
Backflow PreventersGate Valves
Quarter Turn Ball Valves Enviro Check Valves Enviro Check Valves
Ductile Iron Check Valves Stainless Steel Check Valves Stainless Steel Check Valves Stainless Steel Check Valves
Globe Style Silent Check Valves Silent Wafer Check Valve
Swing Check Valves Swing Check Valves Ball Check Valves
Plastic Check Valves Plastic Check Valves
Butterfly Valves Foot Valves Foot Valves Foot Valves Foot Valves Strainers Strainers
Control Valves Control Valves Control Valves Control Valves Control Vavles
Pump Control Regulator Air & Vacuum Valves
DCVE, PVB, RPZE & RPZE IINRS & OSY605E & 601E 80E & 100E Series 80HTE Series 80DI, 82 & 100DI Series 80S6 100MSS & 80/100SS 812XTF/XFF, 816 & 816FL 402BT888 745, 78A & 78 90/92 Series 50/508, 408,208,208B & 208T 100MP 297D/290P & 901 Sylax®
Ductile Iron & Stainless Steel Disc 63, 60SE, 333E & 333DPE 104P/PS, 124P, 190DP & 193D 302BT 80S6F 16/16FL 46P/S, 6P, 6SE & 46T C100 C200, C700 & C1000 Series C300 & C400 Series C500 Series C600, C800 & C900 Series Cycle Gard® I, II, IV & Hy-FlowAir Release & Sewage Air Release Valves
2, 3 u u
5 • u • u • • • u
4 u u u • u • • u
7,8 u u • •8 u u • u
9,10,11 u u • •12 u u • u u •12 • u u • •13 u u u u u •14 u u • •14 u u • • •
15, 16 u u u u • u
15 u u u • • •17 • u u u u
18 u u
18 u •20, 21 u • u •22, 23 u u
22 u • u
23 u • •23 u u • u u •24 u u u u u
24 u u •26 u u • •
26, 27 u • •26 u u • •27 u • • •27 u u • •
30, 31 u u •32 ,33 u u • • • • •
Valve Applications Type of Fluid
3323
5,6,78891010
11,1211131414
16,1718,19181919202022
22,2322232328
28,29
26385 Flomatic pricelist 13_Danfoss Price List 4/16/13 2:09 PM Page 4
VALVES BY TYPE
Air Release/ Vacuum PageMiniair®, Maxiair®, Wellair® 30Comboair®, Sewair® Series 30,31Backflush 31Auto-Drain - Model 70 3Auto-Vac® - Model 77 13
Automatic Control Valve PageAltitude –
C201, CF201,C205, CF205 22
Back Pressure –C301, CF301 22
Cycle Gard® – CB152E,C3100, CI, CN Series, C152E 28,29Float Valve
C701, CF701 23Flow Control
C901, CF901 24Hydraulic Check
C1001, CF1001 24Pressure Reducing
C101, CF101, C150E 22,27Pressure Relief
C401, CF401 23Pump Control
C601, CF601 23Solenoid Actuated
C801-2, CF801-2 24Surge Arrestor
C501, CF501 23
Backflow Preventers PageHose Connection Vacuum Breaker
GFHB8 32Dual Check Valve, GF8080E,
GF8080SS 32Dual Check Valve w/ Atmos. Vent
GF8200 32
Unleaded Ball Valves Page(Quarter Turn)
SS Ball Valves 24
Butterfly Valves PageAzure® AWWA C504 15Kwik-Close ® 15Sylax® Wafer & Lug Style 16Sylax® Electric Actuated 17
Break Off Plugs 9
Check Valves PageBall Check508, 408,4082,208,208T,208B 13Globe Style Silent Check
402BT, 402BTR, 402S6, 402BTR 10Hydraulic Check
C1001, CF1001 24
Drain Back 3Submersible Check
80E Series, 100E, 100XLE, 2,3 80DI, 80DIVFD. 80DI8R, 82DP Series, 5,6 100MP, 80S6VFD, 80MDIVFD 14
Swing Check78A, 78, 90/92, 93 Series 11745, 745BF, 745PI, 745BFPI 12
Wafer & SS Check895, 848, 888, 888S6 812X816, 816F, 816HS Series 9,10
Foot Valves Page60SE, 333 Series, 190 Series,124P, 104 Series, 18 357, 63, 812 Series, 19 302BT Series, 19 Series 16, 16FL 20
Gate Valves PageNRS AWWA C515, C509 33OS&Y AWWA C509 33
Strainers Page6P, 46 Series, 6SE 20Y Strainers 20
Sales Agents by State 34
VALVES BY MATERIAL
Unleaded Bronze PageY-Strainers 20
Cast Iron PageAir Release/Vacuum 30-31Ball Check 13Foot Valve 18,19Globe Style Silent Check 10Strainer 20Swing Check 11,12Wafer Check 9,10
Ductile Iron PageCheck Valves 5-7Control Valve 21-25
Galvanized PageStrainers 20,30
Plastic PageBall Check 13In-line Check 14Insert Check 14Foot Valves 18Strainers 20Submersible Check 13
Stainless Steel PageFoot Valve 18-19Strainers 18Submersible Check 8Wafer Check 9
Unleaded Bronze PageFoot Valves 18In-line Check 2,3Strainers 20Submersible Check 2,3
TABLE OF CONTENTSTABLE OF CONTENTS
1
TABLE O
F CONTENTS
800.833.2040
www.flomatic.com High Quality Valves Built to Last...
26385 Flomatic pricelist 13_Danfoss Price List 4/16/13 2:09 PM Page 5
80XBE-ENVIRO CHECK®body is cast from an unleaded
alloy with two 1/4" tapped holes on outlet side for pressure switchand gauge. This valve features a non-spin acetal poppet, NITRILE(Buna-N) seal and stainless steel spring. For diaphragm tanks.
Temp Max: 180°F (80C) Pressure Max: 400 PSISIZE PART NO. WGT. CASE QTY. LIST PRICE
1" 7961E 1.2 50 $ 61.7411/4" 7963E 1.6 36 $ 79.9311/2" 7964E 2.8 25 $ 101.852" 7965E 3.2 16 $ 181.82
21/2"* 7966E 2.8 25 $ 750.003"* 7967E 3.2 16 $ 1055.004"* 7968E 3.2 16 $ 1450.00
* Unleaded bronze poppet.
* Unleaded bronze poppet.
80CE-ENVIRO CHECK® body is cast from an unleaded alloy.Control Center for Submersible Pump installations with four tappings; one 1/8" inlet side, two 1/4" outlet sides, one 1/8"outletside with brass plug. This valve features a non-spin acetal poppet,NITRILE (Buna-N) seal and stainless steel spring.
Temp Max: 180°F (80C) Pressure Max: 400 PSISIZE PART NO. WGT. CASE QTY. LIST PRICE
1" 4061E 1.2 50 $ 61.7411/4" 4062E 1.8 36 $ 79.9611/2" 4063E 2.7 25 $ 101.852" 4064E 3.1 16 $ 181.82
21/2"* 4065E 2.7 25 $ 750.003"* 4066E 3.1 16 $ 1,055.004"* 4067E 3.1 16 $ 1,450.00
* Unleaded bronze poppet.
80BE-ENVIRO CHECK®body is cast from an unleaded alloy
with two drilled and tapped holes; 1/8" inlet side and 1/4" outletside. This valve features a non-spin acetal (3/4"- 2") or unleadedbronze ( 21/2"- 4") poppet, NITRILE (Buna-N) seal and stainlesssteel spring.
Temp Max: 180°F (80C) Pressure Max: 400 PSISIZE PART NO. WGT. CASE QTY. LIST PRICE 3/4" 4050E .6 100 $ 51.301" 4051E 1 50 $ 61.6011/4" 4052E 1.5 36 $ 75.7911/2" 4053E 2.3 25 $ 98.162" 4054E 2.9 16 $ 152.16
21/2"* 4055E* 6.3 $ 743.383"* 4056E* 13 $ 1,049.574"* 4057E* 25 $ 1,371.96
80BE with 1/4" Tapped Holes on Both EndsSIZE PART NO. WGT. CASE QTY. LIST PRICE
1" 7971E 1 50 $ 61.6011/4" 7972E 1.5 36 $ 75.7911/2" 7973E 2.3 25 $ 98.162" 7974E 2.9 16 $ 152.16
* Unleaded bronze poppet.
80AE-ENVIRO CHECK® body is cast from an unleaded alloy.This valve features a non-spin acetal (1/2"- 2") or unleaded bronze(2 1/2"- 4") poppet, NITRILE (Buna-N) seal and stainless steelspring with a 1/8" drilled and tapped hole inlet side.
Temp Max: 180°F (80C) Pressure Max: 400 PSISIZE PART NO. WGT. CASE QTY. LIST PRICE 3/4" 4040E .7 100 $ 48.711" 4041E 1.2 50 $ 57.3611/4" 4042E 1.5 36 $ 76.5411/2" 4043E 2.4 25 $ 94.672" 4044E 3 16 $ 149.8821/2"* 4045E* 6.4 $ 707.043"* 4046E* 13 $ 1,031.034"* 4047E* 25 $ 1,363.72
80AE with a 1/4" Tapped Hole on the Inlet SideSIZE PART NO. WGT. CASE QTY. LIST PRICE
1" 7981E 1.2 50 $ 57.3611/4” 7983E 1.5 36 $ 76.54
80XAE with a 1/4" Tapped Hole on the Outlet SideSIZE PART NO. WGT. CASE QTY. LIST PRICE
1" 7982E 1.2 50 $ 57.3611/4” 7984E 1.6 36 $ 76.54
* Unleaded bronze poppet.
2
80ME-ENVIRO CHECK® body is cast from an unleaded alloy.This valve features a non-spin poppet, NITRILE (Buna-N) seal andstainless steel spring.
Temp Max: 180°F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. CASE QTY. LIST PRICE
1"M x 1"F 4071E .7 50 $ 46.752"M x 2"F 4079E 2.5 16 $ 147.363"M x 3"F* 4076E*7.2 9 $ 707.55
Consult factory for bulk case quantities.
* Unleaded bronze poppet.
NOTE: Reduced Ported design
80AE Discount Code A80E Discount Code A
Patent # 4,971,093 & 6,581,633other patents pending
80E-ENVIRO CHECK® body is cast from an unleaded alloywith threaded female x female connection. This valve features anon-spin acetal (1/2"- 2") or unleaded bronze (21/2"- 4") poppet, NITRILE (Buna-N) seal and stainless steel spring.
Temp Max: 180°F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. CASE QTY. LIST PRICE 1/4"* 5118E* .2 10 $ 57.673/8"* 5159E* .2 10 $ 57.971/2 " 4029E .2 100 $ 42.183/4" 4030E .7 100 $ 42.721" 4031E 1.3 50 $ 45.8511/4" 4032E 1.6 36 $ 64.5611/2" 4033E 2.5 25 $ 87.922" 4034E 3.1 16 $ 139.3921/2"** 4035E** 6.5 $ 594.863"** 4036E** 13 $ 716.854"** 4037E** 24 $ 1,246.30
Consult factory for bulk case quantities.
* Pressure Max 200 PSI** Unleaded bronze poppet, vertical installations recommended,
for horizontal installation for 21/2"-4" sizes see 80DIX.
VALVES HAVE LESS THAN 1 PSI CRACKING PRESSUREFOR HIGHER CRACKING PRESSURE SEE PAGE 9
80CE Discount Code A 80XBE Discount Code A80BE Discount Code A
www.flomatic.com
80ME Discount Code AENVIRO CHECK
®VALVES 800.833.2040
26385 Flomatic pricelist 13_Danfoss Price List 4/16/13 2:09 PM Page 6
100E-ENVIRO CHECK® body is cast from an unleaded alloy.Hex shaped for easy wrenching, this valve features a non-spinacetal poppet, NITRILE (Buna-N) seal and stainless steel spring.Temp Max: 180°F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. CASE QTY. LIST PRICE 3/4"* 4030E* .7 100 $ 42.721" 4201E 1.1 50 $ 43.531"** 4201LE** 1.2 50 $ 46.8811/4" 4202E 1.4 36 $ 59.66
Consult factory for bulk case quantities.
* Same body as 80E** Extra long threads,for use with PVC pipe.
100E Discount Code A 100ME Discount Code A
100ME-ENVIRO CHECK® body is cast from an unleadedalloy. Hex shaped for easy wrenching, this valve features a non-spin acetal poppet, NITRILE (Buna-N) seal and stainless steelspring.Temp Max: 180°F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. CASE QTY. LIST PRICE
1"M x 1"F 4071E .7 50 $ 44.5211/4"M x 1"F* 4221LE* 1.4 50 $ 45.4811/4"M x 11/4"F 4242E 1.5 50 $ 56.9911/2"M x 11/4"F 4223E 1.5 36 $ 70.90
Consult factory for bulk case quantities.* Longer threads
3
80HTE-ENVIRO CHECK® body with threaded female xfemale connections. Features a high temperature stainless steelpoppet and VITON seal with stainless steel spring. Ideal for hotwater applications.Temp Max: 300°F (150C) Pressure Max: 100 PSI
SIZE PART NO. WGT. LIST PRICE 1/4" 5118HTE .2 $ 71.833/8" 5159HTE .2 $ 72.211/2" 4029HTE .2 $ 54.633/4" 4030HTE .8 $ 76.251" 4031HTE 1.4 $ 74.0411/4" 4032HTE 1.7 $ 101.8711/2" 4033HTE 2.7 $ 148.822" 4034HTE 4.0 $ 201.0121/2" 4035HTE 6.5 $ 674.903" 4036HTE 13.0 $ 799.084" 4037HTE 25.0 $ 1,453.33
80HTE Discount Code A
70- Auto-Drain- This 1” valve is available in bronze, stainlesssteel, and PVC. All internal parts are engineered composite, witha stainless steel disc and resilient seat. Temp Max: 180°F (80C) Pressure Max: 400 PSI
5 PSI – open pressureMATERIAL PART NO. CASE QTY. LIST PRICE
PVC 4501PX 12 $ 58.22Stainless Steel 4501SSX 12 $ 71.96
10 PSI – open pressureMATERIAL PART NO. CASE QTY. LIST PRICE
PVC 4501P 12 $ 58.22Stainless Steel 4501SS 12 $ 71.96
70 Discount Code A
100XLE-ENVIRO CHECK® body is cast from an unleadedalloy. Hex shaped for easy wrenching, this valve features a non-spin acetal poppet, NITRILE (Buna-N) seal and stainless steelspring. Features extra long threads for bell end PVC drop pipe.Temp Max: 180°F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. CASE QTY. LIST PRICE
1"M x 1"F 4201XLE 1 36 $ 54.7911/4"M x 11/4"F 4242XLE 1.5 36 $ 70.54
80MDI-VFD DUCTILE IRON2"M x 2"F 4084VFD 4.5 36 $ 176.29
Consult factory for bulk case quantities.See page 8 for stainless steel version
100XLE Discount Code A
100DPE-ENVIRO CHECK® body. Dual purpose check valve,stainless steel spring and non-spin acetal poppet. Male and femalethreads on both ends. NITRILE (Buna-N) seal.Temp Max: 180°F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. CASE QTY. LIST PRICE
1" x 11/4" 4231E 1.1 50 $ 54.44
Consult factory for bulk case quantities.
100DPE Discount Code A
High Quality Valves Built to Last... www.flomatic.com
Note: 10 PSI spring require 5 gpm to close. For lowerflows use 5 PSI.
ENVIRO CHECK® VALVES 8
00.833.2040
NEW!
Checks shown with special bell end PVC pipe
Flomatic’s New Extended 1” Model 100E Submersible Pump CheckValve is now longer than any other leading brand in the industry. For yourconvenience we left the Part Number 4201E and the Price the same.
We also offer the same up-grade for our stainless steel 1” Model 100SS2Part Number 4201SS2.
More valve at no extra cost!
26385 Flomatic pricelist 13_Danfoss Price List 4/16/13 2:09 PM Page 7
ENVIRO CHECK
®VALVES 800.833.2040
4High Quality Valves Built to Last... www.flomatic.com
Flomatic Submersible Pump Check Valve(Patent Pending)
MODEL 80VFD SERIESWith Stainless Steel Guiding
Delivers Longer Service Life• Variable Flow Rates (VFD Controlled Pumps)• Well Water Pump Systems• Municipal/Public Water Systems• Irrigation and Sprinkler Systems
Features & Benefits• Lower Friction Loss• Noiseless Operation• Stainless Steel Guiding (Replaceable)• Strong Ductile Iron Valve Body (SS Optional)• Un-Leaded Construction• Corrosion Resistant Internal Components• Pipe Lead-In section• Longer thread area (8 round short optional)• Optional “Break-Off” Plug
Lead FreeThe Series 80VFD Check Valves conform to the new federal lead free legislation "CaliforniaLead Plumbing Law" or "Complies with California Lead Plumbing Law” and Vermont State certified to IAPMO R&T certification mark.
Materials• Valve body: Ductile Iron (316SS optional)• Valve Guide: 316 Stainless Steel• Follower: Ductile Iron (316SS Optional)• Disc: Buna-N Nitrile (FDA approved)• Spring: 316 Stainless Steel
Check Valve Model 80DI VFD
New Model80S6 VFD316SS
Model80MDI-VFD
26385 Flomatic pricelist 13_Danfoss Price List 4/16/13 2:10 PM Page 8
5
80DI- High strength epoxy coated ductile iron body, disc and follower with threaded female x female connection. Features aNITRILE (Buna-N) seal, stainless steel spring fasteners, and ductileiron poppet. Designed for vertical applications.
Note: 1" through 1-1/2'' features acetal poppet.Temp Max: 180°F (80C) Pressure Max: 400 PSI 1”–11/2"
600 PSI 2”-8” SIZE PART NO. WGT. CASE QTY. LIST PRICE
1" 4031DI 2 50 $ 29.8811/4" 4032DI 1 36 $ 41.6011/2" 4033DI 2 25 $ 56.902"* 7937 4 16 $ 115.0021/2" 7936 9 1 $ 252.303" 7938 12 5 $ 375.794" 7939 26 4 $ 578.665" 4088 46 $ 1,074.296" 4089 61 $ 1,334.888" 4090 93 $ 2,256.73
*Longer body with stainless steel seat, use break off plug76098-2.
To order Model 80DI with break-off plug, add “PLG” to partUse break off plug 76098-2.
$50.00 added for composite plug installed and add pplg to endof part number.
80DI Discount Code A
80DIX- High strength epoxy coated ductile iron body features adouble-guided ductile iron poppet. Designed for vertical and hori-zontal applications.Temp Max: 180°F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. LIST PRICE3" 7938DIX 13 $ 300.414"* 7939DIX* 17 $ 468.916"* 4089DIX* 51 $ 932.698"* 4090DIX* 89 $ 2,160.9410" 4091DIX 150 $ 3,424.7512" NEW 4092DIX 350 $ 7,027.65
To order model 80 DIX with break-off plug, replace “DIX” with“XPL” in part number and add $75.00 to list price of valve.
$50.00 added for composite plug installed and add pplg to end of part number.
* See 80DI for high capacity flow.
100MDI- High strength epoxy coated ductile iron valve featuresmale threaded inlet and female threaded outlet. Ideal forsubmersible pumps.Temp Max: 180°F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. LIST PRICE11/4"M x 1"F 4221LDI 1 $ 25.0711/4"M x 11/4"F 4242DI* 1.3 $ 31.5711/4"M x 11/4"F 4242LDI** 1.4 $ 36.322"M x 2"F 4084VFD 4.5 $ 176.29
*Consult factory for availability. **Longer threads.
100MDI Discount Code A
BREAK-OFF PLUG- Stainless steel construction. Threaded 3/8"to install into valve. When broken off, riser pipe drains.Temp Max: 180°F (80C) Pressure Max: 600 PSI
SIZE PART NO. WGT. LIST PRICE 2" 76098-2 .17 $ 61.522 1⁄2" 76098-3 .19 $ 63.293" 76098-6 .2 $ 63.744" 76098-7 .25 $ 63.96
5"–8" 76098 .3 $ 63.9610" & 12" 76098-11 .45 $ 76.88
SEE PAGE 7 FOR ILLUSTRATION.
BREAK-OFF PLUG Discount Code A
See 80DI8R for API type, 8 round threads on
80DI Series Check Valves
New Pressure Rating:Model 80DI
600 PSI 2'' – 8'' sizes
80DI8R-8 Round Threads - High strength epoxy coatedductile iron body, disc and follower with threaded female x female8 round connection. Features a NITRILE (Buna-N) seal, stainlesssteel spring fasteners, and ductile iron poppet. Designed for verti-cal applications.Temp Max: 180°F (80C) Pressure Max: 600 PSIShort Threads - consult factory for long threads
SIZE PART NO. WGT. LIST PRICE
3" 7938-1 15 $ 469.744" 7939-1 25 $ 723.325" 4088-1 46 $ 1,343.126" 4089-1 66 $ 1,667.578" 4090-1 93 $ 2,821.17
To order Model 80DI8R with break-off plug, add “PLG” to partnumber for 3"-8" and add $75.00 to list price of valve.
$50.00 added for composite plug installed and add pplg to endof part number.
80DI8R Discount Code A
80DI-VFD - High strength epoxy coated ductile iron body, poppet and stainless steel guide with threaded female x femaleNPT connection. Features a NITRILE (Buna-N) seal, stainless steelshaft, and ductile iron poppet. Designed for vertical or horizontalapplications.Temp Max: 180°F (80C) Pressure Max: 600 PSI
SIZE PART NO. WGT. LIST PRICE
2" 7937VFD 3.2 $ 132.3521⁄2"* 7936VFD 9.5 $ 290.143" 7938VFD 16 $ 432.174" 7939VFD 47 $ 665.455"* 4088VFD 49 $ 1,235.436" 4089VFD 70 $ 1,535.118" 4090VFD 98.5 $ 2,595.24
To order Model 80DI with break-off plug, add “PLG” to partUse break off plug 76098-2.
$50.00 added for composite plug installed and add pplg to endof part number.
*2014
80DI-VFD Discount Code A
COMPOSITE BREAK-OFF PLUG- Threaded 3/8" to installinto valve. When broken off, riser pipe drains.Temp Max: 180°F (80C) Pressure Max: 600 PSI
SIZE PART NO. WGT. LIST PRICE 3"–8" 76098P .1 $ 25.00
Plug is pre marked to be easily sized in the field.
COMPOSITEBREAK-OFF PLUG Discount Code A
80DIX Discount Code A
DUCTILE
IRON CHECK VALVES 8
00.833.2040
NEW!
26385 Flomatic pricelist 13_Danfoss Price List 4/16/13 2:10 PM Page 9
6
80DICL- Ductile iron check valve incorporates Certainteed’spatented groove lock type pipe connections called Certa-Lok™.Fusion epoxy coated inside and out including poppet assembly,this valve is corrosion resistant and unleaded. High strength ductileiron body with stainless steel spring and NITRILE (Buna-N) seal.Temp Max: 180°F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. LIST PRICE2"* 7937CL 4 $ 225.203" 7938CL 5 $ 311.834"** 7939CLVFD 15 $ 425.095" 4088CL 14 $ 690.916" 4089CL 35 $ 1,426.10
80MDICL- Ductile iron check valve uses Certainteed’s patentedgroove lock type pipe connection on outlet end, and male pipethread for the inlet connection. Materials are the same as the80DICL.
SIZE PART NO. WGT. LIST PRICE2"* 7937MCL 4 $ 229.563" 7938MCL 5 $ 307.474"** 7939MCLVFD 15 $ 448.725" 4088MCL 14 $ 695.256" 4089MCL 35 $ 1,446.12
*Acetal poppet**New VFD poppet style
Certa-Lok™ is a registered trademark with CertainteedCorporation.
Note: Reduce ported poppet one size smaller.
Also available in all 316SS, Model 80S6CL. See Page 8.
80DI Turbo- Patented high efficiency ductile iron check valve.Threaded female x female connection. High strength ductile ironbody and poppet, stainless steel spring and screws, stainless steelshaft and NITRILE (Buna-N) Seal Disc. (No “O”-Ring Seals)Temp Max: 180°F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. LIST PRICE6" 4089T 46 $ 2,621.3010" 4091T 155 $ 5,754.00
80DI Turbo Discount Code A 80DICL Discount Code A
82DP- Dual purpose compact ductile iron reduced ported checkvalve with male and female threads on both ends. High strengthductile iron body and poppet, with stainless steel spring and fasteners. Designed to fit into tight fitting wells.Temp Max: 180°F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. LIST PRICE21/2" F x 3" M* 4094DP 7 $ 300.403" F x 4" M 4095DP 10 $ 399.564" F x 5" M 4096DP 25 $ 753.745" F x 6" M 4097DP 51 $ 1,515.09
Same valve as 82, extra female (internal) threads.
Note: Reduce ported poppet one size smaller.
* Unleaded Bronze Poppet
82DP (replaces 82) Discount Code A
100% Fusion Epoxy coated withour quality coating operation.
High Quality Valves Built to Last... www.flomatic.com
DUCTILE IRON CHECK VALVES 800.833.2040
80MDI- High strength epoxy coated ductile iron valve featuresmale threaded inlet and female threaded outlet. Ideal forsubmersible pumps.Temp Max: 180°F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. CASE QTY. LIST PRICE
2"M x 2"F 4084VFD* 4.5 6 $ 176.293"M x 3"F 4083 8 5 $ 336.734"M x 4"F 4077 14 4 $ 521.835"M x 5"F 4075 23 $ 792.216"M x 5"F 4087 48 $ 904.676"M x 6"F 4081VFD 40 $ 959.85
To order Model 80MDI with break-off plug, add “PLG” to part number for 4"-6" and add $75.00 to list price of valve.
$50.00 added for composite plug installed and add pplg to endof part number.
Note: RESTRICTED FLOW - REDUCED PORTED
*July 2013
80MDI Discount Code A
Patented Dual Poppet Design Reduces Headloss by 60%
80MDI-VFD- Features extra long threads for bell end pipe.Temp Max: 180°F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. CASE QTY. LIST PRICE
2"M x 2"F 4084VFD 4 6 $ 176.293"M x 3"F 4083VFD 14 5 $ 336.734"M x 4"F 4077VFD 22 4 $ 521.835"M x 5"F 4075VFD 23 $ 792.216"M x 5"F 4087VFD 48 $ 904.676"M x 6"F 4081VFD 50 $ 959.85
To order Model 80MDI with break-off plug, add “PLG” to part number for 4"-6" and add $75.00 to list price of valve.
$50.00 added for composite plug installed and add pplg to endof part number.
80MDI-VFD Discount Code A
PRODUCT RELEASE DATES
SIZE PART NO. FIRST SHIP DATE
2" x 2" 4084VFD July 20133" x 3” 4083VFD Sept 20134" x 4” 4077VFD July 20135" x 5” 4075VFD 2014 6" x 6” 4087VFD Stock
80DI-CLVFDShown above with Certa-Lok™ pipe, not included.
26385 Flomatic pricelist 13_Danfoss Price List 4/16/13 2:10 PM Page 10
80DIB- Standard high strength epoxy coated ductile iron bodywith 1/8" tapped hole on inlet side and 1/4" tapped hole on outlet side.
Note: 1" through 11/2" features acetal poppet.Temp Max: 180°F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. CASE QTY LIST PRICE
1" 4051DI .2 50 $ 37.1311/4" 4052DI .7 36 $ 46.9811/2" 4053DI 1.3 25 $ 63.082" 4054DI 5 16 $ 117.00
21/2"* 4055DI 7 1 $ 322.583"* 4056DIX 10 5 $ 380.004"* 4057DIX 19 4 $ 580.00
Sizes available to 10"- CONSULT FACTORY.* New 80DIX double guided poppet. Can be installed vertical
or horizontal.
7
80DIA- Standard high strength epoxy coated ductile iron bodywith 1/8" tapped hole on inlet side.
Note: 1" through 11/2" features acetal poppet.Temp Max: 180°F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. CASE QTY. LIST PRICE
1" 4041DI .2 50 $ 37.1311/4" 4042DI .7 36 $ 46.9811/2" 4043DI 1.3 25 $ 63.082" 4044DI 5 16 $ 117.00
21/2"* 4045DI 7 1 $ 322.583"* 4046DIX 10 5 $ 380.004"* 4047DIX 19 4 $ 580.00
Sizes available to 10"- CONSULT FACTORY.* New 80DIX double guided poppet. Can be installed vertical
or horizontal.
80DIA Discount Code A 80DIB Discount Code A
BREAK-OFF PLUGBREAK-OFF PLUG
BEFORE AFTER
CHECK VALVE
RISER PIPE
PIPE WEIGHT BEING DROPPED
visit our website
www.flomatic.comfor Flomatic product spec sheets.
FLOMATIC
80DI
FLOMATIC
80DI
www.flomatic.com High Quality Valves Built to Last...
DUCTILE
IRON CHECK VALVES 8
00.833.2040
TECHNICAL TECHNICAL SPEC SHEETS...SPEC SHEETS...are available for all products
in this catalog.www.flomatic.com
Benefits• When servicing the pump, it
reduces the lifting weight, by allowing the water to drain
• Eliminates water splashing at the surface
• Simply replace the BREAK-OFF PLUG for re-installation
Features• No corrosive parts
• Available for series 80DI, 80DI-VFD, 80DIX, and 80S6
See page 5 for pricingValve Size Length Min pipe size to drop Length of pipe
inch mm inch mm inch mm feet meters
3 75 3 75 1-1/2 40 10 34 100 4 100 2 50 10 35 125 5 125 2/1/2 65 10 36 150 5 125 3 80 4 1.28 200 5 125 4 100 4 1.2
10&12 250 8-1/2 206 5 125 4 1.2
NOW AVAILABLEIN COMPOSITEMATERIAL (part #76098P)
Stainless steel and composite materialMust be installed with teflon tape
26385 Flomatic pricelist 13_Danfoss Price List 4/16/13 2:10 PM Page 11
80SSB-body is all 303 stainless steel one piece body with twodrilled and tapped holes; 1/8" inlet side and 1/4" outlet side.
80SSA Discount Code A
100MSS- All 303 stainless steel body. Features a high strengthacetal poppet, stainless steel spring and NITRILE (Buna-N) seal.Temp Max: 180°F (80C) Pressure Max: 400 PSI
SIZE PART NO. CASE QTY. LIST PRICE1/2"M x 1/2"F** 4219SS** 100 $ 81.943/4"M x 3/4"F** 4218SS** 100 $ 88.641"M x 1"F** 4220SS** 81 $ 101.8511/4"M x 1"F* 4221LSS2(CAST) 50 $ 49.9811/4"M x 11/4"F 4242SS2 (CAST) 50 $ 62.1911/4"M x 11/4"F* 4242LSS2(CAST) 50 $ 63.41
80SS/100SS - All 303 stainless steel one piece body. Stainlesssteel spring and Buna-N seal. Threaded female x female connection.Temp Max: 180°F (80C) Pressure Max: 400 PSI
SIZE PART NO. CASE QTY. LIST PRICE
1"* 4201SS2* 50 $ 46.681" 4031SS2 50 $ 48.521"* long 4201LSS2* 50 $ 54.9811/4"* 4202SS2* 36 $ 65.7811/4" 4032SS2 36 $ 67.8011/2" 4033SS2 25 $ 95.042" 4034SS2 16 $ 153.21
100XLSS Discount Code A
80SSC Discount Code A
100MSS Discount Code A
100XLSS - STAINLESS STEEL body is cast from 303 stainlesssteel. Hex shaped for easy wrenching, this valve features a non-spin acetal poppet, NITRILE (Buna-N) seal and stainless steelspring. Features extra long threads for special bell end PVC pipe.Temp Max: 180°F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. CASE QTY. LIST PRICE
1"M x 1"F 4201XLSS2 1 36 $ 58.9711/4"M x 11/4"F 4242XLSS2 1.5 36 $ 75.90
80MS6-VFD (316 STAINLESS STEEL)2"M x 2"F* 4084S6VFD 4 36 $369.00
80SS WITH A TAPS - All 303 stainless steel one piece body.This valve features a non-spin acetal poppet, NITRILE (Buna-N) sealand stainless steel spring with a 1/8" drilled and tapped hole inlet side.
Temp Max: 180°F (80C) Pressure Max: 400 PSISIZE PART NO. WGT. CASE QTY. LIST PRICE
1" 4041SS2 1.2 50 $ 69.3311/4" 4042SS2 1.5 36 $ 96.1111/2" 4043SS2 2.4 25 $ 118.442" 4044SS2 3 16 $ 187.53
80SSA with a 1/4 " Tapped Hole on the Inlet Side
SIZE PART NO. WGT. CASE QTY. LIST PRICE 1" 7981SS2 1.2 50 $ 69.3311/4” 7983SS2 1.5 36 $ 96.11
80SSXA with a 1/4 " Tapped Hole on the Outlet SideSIZE PART NO. WGT. CASE QTY. LIST PRICE
1" 7982SS2 1.2 50 $ 69.3311/4” 7984SS2 1.6 36 $ 96.11
80SSXB Discount Code A
80SSXB body is alll 303 stainless steel one piece body with two1/4" tapped holes on outlet side for pressure switch and gauge.This valve features a non-spin acetal poppet, NITRILE (Buna-N)seal and stainless steel spring. For diaphragm tanks.Temp Max: 180°F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. CASE QTY. LIST PRICE
1" 7961SS2 1.2 50 $ 82.2111/4" 7963SS2 1.6 36 $ 102.55
80SSC- All 303 stainless steel body construction. Control Centerfor Submersible Pump installations with four tappings; one 1/8"inlet side, two 1/4" outlet sides, one 1/8" outlet side with plug.
Temp Max: 180°F (80C) Pressure Max: 400 PSISIZE PART NO. WGT. CASE QTY. LIST PRICE
1" 4061SS2 1.2 50 $ 82.2111/4" 4062SS2 1.8 36 $ 102.55
80SSB Discount Code A
SIZE PART NO. WGT. CASE QTY. LIST PRICE
1" 4051SS2 1 50 $ 77.0711/4" 4052SS2 1.5 36 $ 94.8211/2" 4053SS2 2.3 25 $ 123.892" 4054SS2 2.9 16 $ 190.37
80SSB with 1/4" Tapped Holes on Both EndsSIZE PART NO. WGT. CASE QTY. LIST PRICE 1" 7971SS2 1 50 $ 77.0711/4" 7972SS2 1.5 36 $ 94.8211/2" 7973SS2 2.3 25 $ 123.892" 7974SS2 2.9 16 $ 190.37
Temp Max: 180°F (80C) Pressure Max: 400 PSI
* Long body** Made from bar stock, viton seal
* August 2013
VITON seats optional, add 10% to list price.* Same body style as 100 series. See page 26 for 3/8” and 1/2” 316SS check valve
STAINLESS STEEL INTERNAL POPPET SYSTEMAVAILABLE ON MOST MODELS (25% ADDER)
VA LV E O P T I O N :
STA
INLESS STEEL CHECK VALVES 800.833.2040
80SS/100SS Discount Code A
8
80S6CL- Stainless steel check valve incorporates Certainteed’spatented groove lock type pipe connections called Certa-Lok™.Stainless steel inside and out including poppet assembly. Highstrength stainless steel body and spring with (Buna-N) seal.Temp Max: 180°F (80C) Pressure Max: 400 PSI
SIZE PART NO. WGT. LIST PRICE2" 7937S6CL 4 $ 643.083" 7938S6CL 5 $ 810.724" 7939S6CL 8 $ 889.646" 4089S6CL 35 $ 3,399.00
80S6MCL- Stainless steel check valve uses Certainteed’s patented groove lock type pipe connection on outlet end, andmale pipe thread for the inlet connection. Materials are the same as the 80S6CL.
2" 7937S6MCL 4 $ 669.503" 7938S6MCL 5 $ 817.824" 7939S6MCL 8 $ 898.166" 4089S6MCL 35 $ 3,456.68
Certa-Lok™ is a registered trademark with Certainteed Corporation.Note: Poppet one size smaller.
80S6CL Discount Code A
26385 Flomatic pricelist 13_Danfoss Price List 4/16/13 2:10 PM Page 12
812X WAFER STYLE CHECK VALVE- All 316 stainlesssteel, wafer connection ANSI 150/300. Metal to metal seating on812X model.Temp Max: -20° F (-30C) to 660° F (350C)*Pressure Max: Metal Seating 600 PSI*NSF/ANSI 61-2010 Certified by IAPMO R&T, 2”-8”812X - No Flange Face Seal
SIZE PART NO. WGT. LIST PRICE1/2" 2420X .2 $ 90.403/4" 2421X .3 $ 117.351" 2422X .5 $ 137.3411/4" 2423X .7 $ 181.9611/2" 2424X 1.4 $ 269.772" 2425X 2.3 $ 313.2321/2" 2426X 3.9 $ 372.423" 2427X 5.4 $ 472.494" 2428X 7.8 $ 630.055" 2429X 20 $ 2,311.326" 2430X 32 $ 2,916.968" 2431X** 67 $ 5,060.398" 2432X 64 $ 5,400.29
*Consult factory for temp. & pressure rating. **230 PSI Max
812XT- All 316 stainless steel, threaded 3 piece check valve andbody. Metal to metal seating, teflon O-ring. 1 1/2"–8" availablewith NITRILE (Buna-N) or VITON seal, add 10% to list price. 2"–6"available with socket weld connection, add 25% to list.Temp Max: Metal Seating only 400°F (200C)* Pressure Max: 300 PSI*
SIZE PART NO. WGT. LIST PRICE1/2" 2420XT .9 $ 124.803/4" 2421XT 1.5 $ 144.771" 2422XT 2.1 $ 179.5411/4" 2423XT 3.5 $ 272.2811/2" 2424XT 5.3 $ 349.202" 2425XT 7.5 $ 485.1721/2" 2426XT 19 $ 598.393" 2427XT 24 $ 869.774" 2428XT 38 $ 1,443.035" 2429XT 60 $ 2,591.486" 2430XT 77 $ 3,684.318" 2431XT** 136 $ 6,149.10
Note: Add V (Viton) or R (Buna-N) to part #.
*Consult factory for temp. & pressure rating. **230 PSI Max
Also available with Butt (XB) and Socket Weld (XS) ends.
812X Discount Code B
SIZE PART NO. WGT. LIST PRICE1/2" 2420J .2 $ 90.403/4" 2421J .3 $ 117.351" 2422J .5 $ 137.3411/4" 2423J .7 $ 181.9611/2" 2424J 1.4 $ 269.772" 2425J 2.3 $ 313.2321/2" 2426J 3.7 $ 372.423" 2427J 5.4 $ 472.494" 2428J 7.8 $ 630.05
VALVE BODY FOR 812XT(with no flanges)
816- All 316 stainless steel threaded FNPT “Y-Type” check valve.Patented Spring loaded, Teflon® soft-seated plunger, optionalencapsulated spring, with all 316SS internals.Temp Max: 450°F (230C) Pressure Max: 600 PSI
X=1 FOR STAINLESS X=2 FOR CARBONSTAINLESS CARBON
SIZE PART NO. LIST PRICE LIST PRICE1/4" YV2501-X-0100 $ 182.01 $ 159.633/8" YV3751-X-0100 $ 182.01 $ 159.631/2" YV5001-X-0100 $ 189.88 $ 159.633/4" YV7501-X-0100 $ 241.44 $ 201.831" YV0011-X-0100 $ 270.64 $ 231.8611/4" YV1251-X-0100 $ 395.52 $ 345.8811/2" YV0151-X-0100 $ 443.97 $ 356.552" YV0021-X-0100 $ 665.47 $ 550.01
Consult factory for pricing and other end connections and body material options.
816HS Discount Code B
816HS- Same body as Model 816 witih heavy spring for highercracking pressure.SIZE PART NO. CRACKING PRESSURE LIST PRICE1” YV001110107-08 8 PSI $297.701” YV001110107-10 10 PSI $297.701” YV001110107-20 20 PSI $297.701” YV001110107-30 30 PSI $297.70Consult factory for pricing and other sizes andbody material options.*Note: the last 2 digits are the weight of the spring.
STA
INLESS STEELCHECK VALVES 8
00.833.2040
812XT Discount Code B
816FL- All 316 stainless steel flanged “Y-Type” check valve.Patented Spring loaded, Teflon® soft-seated plunger, optionalencapsulated spring, with all 316SS internals.Temp Max: 450°F (230C) Pressure Max: 600 PSI
X=1 FOR STAINLESS X=2 FOR CARBONSTAINLESS CARBON
SIZE PART NO. LIST PRICE LIST PRICE1 " YV0014-X-0100 $ 571.92 $ 489.8311/4" YV1254-X-0100 $ 719.08 $ 579.8311/2" YV0154-X-0100 $ 851.20 $ 668.102 " YV0024-X-0100 $ 1,013.41 $ 832.53
Consult factory for pricing and other sizes and body materialoptions.
816FL Discount Code B
816 Discount Code B
9
80S6- All 316 stainless steel threaded check valve body.Stainless steel spring, poppet and VITON seal.Temp Max: 400°F (200C) Pressure Max: 400 PSI
SIZE PART NO. WGT. LIST PRICE1" 4031S6 1.1 $ 84.6611/4" 4032S6 1.4 $ 125.1311/2" 4033S6 2.7 $ 164.002" 4034S6 4.0 $ 243.583" 7938S6 10 $ 851.924" 7939S6 25 $ 1,290.596" 4089S6 65 $ 4,041.728" 4090XSS 90 $ 6,572.4310" 4091XSS 170 $11,618.40
80S6 Discount Code A
To order Model 80S6 with break-off plug, add “PLG” to part number for 3”- 10” and add $75.00 to list price on valve above.$50.00 added for composite plug installed and add pplg to end of part #.
80S6- All 316 stainless steel threaded check valve body.Stainless steel spring, poppet and VITON seal.Temp Max: 400°F (200C) Pressure Max: 400 PSI
SIZE PART NO. WGT. LIST PRICE2" 4034S6VFD 4.0 $ 280.123"* 7938S6VFD 10 $ 979.914"* 7939S6VFD 25 $ 1,484.186"* 4089S6VFD 65 $ 4,647.988"* 4090XSSVFD 90 $ 7,558.29
80S6VFD Discount Code A
80MS6VFD- All 316 stainless steel threaded check valve body.Stainless steel spring, poppet and VITON seal.Temp Max: 400°F (200C) Pressure Max: 400 PSI
SIZE PART NO. WGT. LIST PRICE2" x 2"* 4084S6VFD 4.0 $ 369.004" x 4"* 4077S6VFD 25 $ 415.796" x 6"* 4081S6VFD 58 $ 644.35
*Consult factory for availability
80MS6VFD Discount Code A
To order Model 80S6 with break-off plug, add “PLG” to part number for 3”- 10” and add $75.00 to list price on valve above.$50.00 added for composite plug installed and add pplg to end of part #.
*Consult factory for availability
26385 Flomatic pricelist 13_Danfoss Price List 4/16/13 2:10 PM Page 13
888/888R- New patented design. Cast iron body with epoxycoating. Wafer connection ANSI 125/250. Metal to metal seating.For drip-tight sealing use rubber sealingNSF/ANSI 61-2010 certified by IAPMO R&T.For 888ST add ST to end of part number and 25% forstainless steel trim. Temp Max: 180°F (80C)Pressure Max: 200 PSI ANSI 125, 400 PSI: ANSI 250
SIZE PART NO. WGT. LIST PRICE2" 2434 5 $ 189.0021/2" 2432 7 $ 206.003" 2435 11 $ 212.004" 2436 18 $ 250.005" 2433 25 $ 445.006" 2437 36 $ 518.008" 2438 80 $ 925.008"** 2438-2** 85 $ 1,154.00
10"* 2439* 129 $ 1,453.00
888R-Rubber seal drip-tightSIZE PART NO. WGT. LIST PRICE2" 2434R 5 $ 208.0021/2" 2432R 7 $ 226.003" 2435R 11 $ 233.004" 2436R 18 $ 275.005" 2433R 25 $ 490.006" 2437R 36 $ 569.008" 2438R 80 $ 1,018.008"** 2438R-2** 85 $ 1,269.00
10"* 2439R* 129 $ 1,598.00
Note: 2''-6'' are both ANSI 125/250* ANSI 125 ONLY.** 250# Flanged Viton add 20% to 888 list
SPLIT DISC®- Cast iron body with epoxy coating and split discdesign. (Model 895 SS-Disc and Model 848 Bronze-Disc) Wafer connection ANSI 125 2”-12” EPDM, 14”-24” NITRILE (Buna-N) ,PTFE bearing. Stainless steel spring hinge pin. Lifting ring std. above 4".Temp Max: 180°F (80C) Pressure Max: 200 PSI
SIZE 895 PART NO. WGT. LIST PRICE2 " 3000 3 $ 148.0021/2" 3001 4 $ 173.003" 3002 7 $ 186.004" 3003 8 $ 239.005" 3004 13 $ 389.006" 3005 18 $ 385.008" 3006 21 $ 578.0010" 3007 49 $ 875.0012" 3008 75 $ 1,178.00
SIZE 848 PART NO. WGT. LIST PRICE14" 2509 120 $ 2,917.0016" 2510 170 $ 4,888.0018" 2511 180 $ 5,785.0020" 2512 250 $ 7,807.0024" 2513 360 $11,227.00
Consult Factory for larger sizes up to 48”.
Bronze Disc 14”–24”
10
402BT/402BTR- Cast iron body with epoxy coating. Flangedconnection ANSI B16.1, class 125. Metal to metal seating withstainless steel spring.Note: Rubber seal 2''-12'', 14”-24” NITRILE (Buna-N).For Model 402BTR add R to end of part number & 10%to list price.Temp Max: 180° F (80C) Pressure Max: 200 PSI: 2"-12", 150 PSI: 14"-24"
SIZE PART NO. WGT. LIST PRICE2" 2239BT* 13 $ 329.0021/2" 2240BT 18 $ 398.003" 2241BT 23 $ 440.004" 2242BT 40 $ 565.005" 2243BT 51 $ 855.006" 2244BT 75 $ 975.008"* 2245BT** 116 $ 1,575.0010" 2247BT 194 $ 2,310.0012"** 2248BT** 306 $ 3,700.0014" 2249BT 380 $ 5,900.0016" 2250BT 500 $ 8,659.0018" 2251BT 724 $ POA20" 2252BT 890 $ POA24" 2254BT 1220 $ POA
*Optional 316 SS seat trim available
402BT/402BTR Discount Code B
848/895 SPLIT DISC® Discount Code B
www.flomatic.com
CHECK VALVES 800.833.2040
402BT/402BTR- Cast iron body with epoxy coating. Flangedconnection ANSI B16.1, class 250. Metal to metal seating withstainless steel spring.Note: Rubber seal 2''-12'', 14”-24” NITRILE (Buna-N).For Model 402BTR add R to end of part number & 10%to list price.Temp Max: 180° F (80C) Pressure Max: 200 PSI: 2"-12", 150 PSI: 14"-24"
SIZE PART NO. WGT. LIST PRICE21/2" 2240BT2 18 $ 770.003" 2241BT2 23 $ 810.004" 2242BT2 40 $ 1,069.005" 2243BT2 51 $ 1,325.006" 2244BT2 75 $ 1,751.008" 2245BT2 116 $ 2,975.0010" 2247BT2 194 $ 4,271.0012" 2248BT2 306 $ 6,727.0014" 2249BT2 380 $ 9,070.0016" 2250BT2 500 $12,769.00
402BT2/402BTR2 Discount Code B
402S6/402S6T- 316 stainless steel body. Flanged connectionANSI B16.1, class 150. Metal to metal seating with stainless steelspring.Note: Rubber sealFor Model 402S6 add R to end of part number and 10%.
SIZE PART NO. WGT. LIST PRICE6"* 2244S6 80 $ 2,768.008"* 2245S6 120 $ 4,486.0012"* 2248S6 330 $14,398.0014" 2249S6 410 $ POA18" 2251S6 800 $ POA
888S6/888S6R- New patented design. 316 stainless steelbody. Wafer connection ANSI 150/300. Metal to metal seating.Note: Rubber seal For Model 888S6 add R to end of partnumber and 10%.Temp Max: 180°F (80C)Pressure Max: 200 PSI ANSI 125, 400 PSI: ANSI 250
SIZE PART NO. WGT. LIST PRICE2" 2434S6 5 $ 456.003" 2435S6 12 $ 719.004" 2436S6 19 $ 998.006" 2437S6 39 $ 1,986.008" 2438S6* 92 $ 3,698.00
*ANSI 150 only
888S6/888S6R Discount Code B
402S6/402S6T Discount Code B
888/888R Discount Code B
All New Heavy Duty 316 StainlessSteel or Super Duplex Stainless SteelFlanged Submersible Pump CheckValves Model 402S6. Available in8”, 12”, 14” & 18”. Supportingpumps up to 1,250 HP. See page10. Consult factory for other sizes.
NEW!
*
26385 Flomatic pricelist 13_Danfoss Price List 4/16/13 2:10 PM Page 14
11
78 Discount Code B
AWWA C508-01 SWING CHECK VALVESAll 90/92 available with limit switch, add $300 and add “LS” to end of part #.
78A Discount Code B
90LS/92LS* Discount Code B 90LW/92LW* Discount Code B 90CS/92CS* Discount Code B
Consult factory for special coatings
SWING CHECK VALVES 8
00.833.2040
High Quality Valves Built to Last...
78- Cast iron body with epoxy coating. Flanged connection ANSIB16.1, class 125. Reinforced neoprene swing disc. In-line serviceable.Temp Max: 140°F (60C)Pressure Max: 175 PSI: 3"-12", 150 PSI: 14"
SIZE PART NO. WGT. LIST PRICE21/2" 2181 35 $ 499.003" 2182 38 $ 512.004" 2183 49 $ 649.006" 2185 106 $ 1,055.008" 2186 172 $ 2,239.0010" 2187 335 $ 4,649.0012" 2188 432 $ 6,622.0014" 2189 690 $ 9,350.00
Stainless steel seats optional on Model 92 only, add 10% to list price.*92 series 4", 6" and 8”.Epoxy coated blue. Model 90 is TMEMIC red primer N-140.
Note: Other seals are available that are chemically resistantespecially to chloramines. Please consult factory.
90LW/92LW- Cast iron body with epoxy primer. Meets AWWAC508 specifications. Flanged connection ANSI B16.1, class 125.Bronze trim with stainless steel shaft. Metal to metal or NITRILE(Buna-N) seal (Please specify) Features external lever and weight.
Temp Max: 180°F (80C)Pressure Max: 200 PSI: 2"-12", 150 PSI: 14"-30"For vertical installation add “V” to part number.
SIZE PART NO. WGT. LIST PRICE2" 2704LW 41 $ 1,440.003" 2706LW 71 $ 1,560.004"* 3707LW* 125 $ 1,550.006"* 3709LW* 224 $ 2,050.008"* 3710LW* 401 $ 3,060.008"** 3710LW-18 380 $ 3,555.0010" 2711LW 600 $ 6,368.0012" 2712LW 843 $ 9,130.0014" 2714LW 1323 $ 13,365.0016" 2716LW 1875 $ 17,510.0018" 2718LW 2110 $ 24,720.0020" 2720LW 2841 $ 29,252.0024" 2724LW 3927 $ 40,427.0030" 2730LW 5693 $ POA
90CS/92CS- Cast iron body with epoxy primer. Meets AWWA C508 specifications. Flanged connection ANSI B16.1, class 125. Bronze trim with stainless steel shaft. Metal to metal or NITRILE (Buna-N) seal (Please specify)Features external lever and weight.sealed end cushion closure system for adjustable rate of valve closure. Temp Max: 180°F (80C)Pressure Max: 200 PSI: 3"-12", 150 PSI: 14"-30"For vertical installation add “V” to part number.
SIZE PART NO. WGT. LIST PRICE2” 2704CS 47 $ 2,500.003" 2706CS 98 $ 3,030.004"* 3707CS* 195 $ 3,412.006"* 3709CS* 325 $ 3,945.008"* 3710CS* 455 $ 5,039.008"** 3710CS-18 435 $ 5,489.0010" 2711CS 780 $ 8,425.0012" 2712CS 1073 $ 12,914.0014" 2714CS 1495 $ 13,812.0016" 2716CS 2119 $ 19,555.0018" 2718CS 2386 $ 26,766.0020" 2720CS 3211 $ 29,862.0024" 2724CS 4440 $ 42,000.0030" 2730CS 4975 $ POA
** Short Body 18” Face to Face.** Short Body 18” Face to Face.
78A- Ductile iron angle body with epoxy coating. Flanged connection ANSI B16.1, class 125. Reinforced neoprene swingdisc. In-line serviceable. (same as ANSI 90˚ elbow dimension)Temp Max: 140°F (60C)Pressure Max: 175 PSI: 3"-12", 150 PSI: 14"
SIZE PART NO. WGT LIST PRICE3" 2182A 38 $ 512.004" 2183A 49 $ 649.006" 2185A 106 $ 1,055.008" 2186A 172 $ 2.239.0010" 2187A 335 $ 4,649.0012" 2188A 432 $ 6,622.0014" 2189A 690 $ 9,350.00
90LS/92LS*-Cast iron body with epoxy primer. Meets AWWAC508 specifications. Flanged connection ANSI B16.1, class 125.Bronze trim with stainless steel shaft. Metal to metal or NITRILE(Buna-N) seal (Please specify) Features external lever and spring.Temp Max: 180°F (80C)Pressure Max: 200 PSI: 2"-12", 150 PSI: 14"-30"For vertical installation add “V” to part number.
SIZE PART NO. WGT. LIST PRICE2" 2704LS 46 $ 1,440.003" 2706LS 72 $ 1,560.004"* 3707LS* 119 $ 1,550.006"* 3709LS* 205 $ 2,050.008"* 3710LS* 359 $ 3,060.008"** 3710LS-18 339 $ 3,555.0010" 2711LS 537 $ 6,368.0012" 2712LS 748 $ 9,130.0014" 2714LS 1165 $ 13,365.0016" 2716LS 1645 $ 17,510.0018" 2718LS 1860 $ 24,720.0020" 2720LS 2495 $ 29,252.0024" 2724LS 3440 $ 40,427.0030" 2730LS 4975 $ POA
** Short Body 18” Face to Face.
93LW Discount Code B
93LW- Swing check valve with outside lever and weight. Castiron body with epoxy coated. Meets AWWA C508 specifications.Flanged connection ANSI B16.1, class 125. Bronze trim with stainless steel shaft. Metal to metal seating standard. Featuresexternal lever and weight. Imported.
Temp Max: 180°F (80C)Pressure Max: 200 PSI: 2"-12"
SIZE PART NO. WGT. LIST PRICE2" 2804LW 30 $ 910.003" 2806LW 54 $ 975.004" 2807LW 85 $ 996.006" 2809LW 137 $ 1,268.008" 2810LW 240 $ 1,989.0010" 2811LW 545 $ 3,763.0012" 2812LW 745 $ 5,395.00
ARRA compliant – made in USA
For non-potable water
26385 Flomatic pricelist 13_Danfoss Price List 4/16/13 2:10 PM Page 15
SIZE PART NO. WGT. LIST PRICE3"* 2382BFPI 40 $ 937.204"* 2383BFPI 68 $ 1,051.005"* 2384BFPI 105 $ 1,321.006" 2385BFPI 128 $ 1,449.008" 2386BFPI 235 $ 2,161.0010" 2387BFPI 380 $ 3,312.0012" 2388BFPI 620 $ 4,622.0014" 2390BFPI 740 $ 6,691.0016" 2391BFPI 1,035 $ 8,581.0018" 2392BFPI 1,540 POA20" 2393BFPI 1,835 POA24" 2394BFPI 2,475 POA
SIZE PART NO. WGT. LIST PRICE2" 2380 27 $ 380.0021/2" 2381 35 $ 450.003"* 2382 40 $ 470.004"* 2383 68 $ 529.005"* 2384 105 $ 895.006" 2385 128 $ 820.008" 2386 235 $ 1,400.0010" 2387 380 $ 2,600.0012" 2388 620 $ 3,600.0014" 2390 740 $ 5,350.0016" 2391 1,035 $ 7,179.0018" 2392 1,540 $ 8,300.0020" 2393 1,835 $10,300.0024" 2394 2,475 $16,300.00
SIZE PART NO. WGT. LIST PRICE2" 2380BF 27 $ 607.00
21/2" 2381BF 35 $ 669.003"* 2382BF 40 $ 672.004"* 2383BF 68 $ 789.005"* 2384BF 105 $ 1,172.006" 2385BF 128 $ 1,188.008" 2386BF 235 $ 1,886.0010" 2387BF 380 $ 3,034.0012" 2388BF 620 $ 4,355.0014" 2390BF 740 $ 6,420.0016" 2391BF 1,035 $ 8,325.0018" 2392BF 1,540 POA20" 2393BF 1,835 POA24" 2394BF 2,475 POA
SIZE PART NO. WGT. LIST PRICE3"* 2382LS 42 $ 1,072.004"* 2383LS 70 $ 1,142.005"* 2384LS 107 $ 1,291.006" 2385LS 130 $ 1,457.008" 2386LS 237 $ 1,950.0010" 2387LS 382 $ 3,018.0012" 2388LS 622 $ 4,268.0014" 2390LS 742 $ 5,943.0016" 2391LS 1,037 $ 7,803.0018" 2392LS 1,542 POA20" 2393LS 1,837 POA24" 2394LS 2,477 POA
12
745 WITH POSITION INDICATOR AND BACKFLUSHDEVICE- 45˚ Seat Flo-Flex®, Swing Check Valve Epoxy coatedDuctile Iron Body, ANSI B16.1, class 125, ANSI/AWWA C508,Buna-N Coated Disc.Temp Max: 140°F (60C) Pressure Max: 250 PSI
745 WITH BACKFLUSH DEVICE- 45˚ Seat Flo-Flex®, Swing Check Valve Epoxy coated Ductile Iron Body, ANSI B16.1,class 125, ANSI/AWWA C508, Buna-N Coated Disc.Temp Max: 140°F (60C) Pressure Max: 250 PSI
745- 45° Seat Flo-Flex®, Swing Check Valve Epoxy coatedDuctile Iron Body, ANSI B16.1, class 125, ANSI/AWWA C508,Buna-N Coated Disc.Temp Max: 140°F (60C) Pressure Max: 250 PSI
745PI Discount Code B745BF Discount Code B745 Discount Code B
SIZE PART NO. WGT. LIST PRICE3"* 2382PI 40 $ 722.004"* 2383PI 68 $ 792.005"* 2384PI 105 $ 941.006" 2385PI 128 $ 1,107.008" 2386PI 235 $ 1,600.0010" 2387PI 380 $ 2,668.0012" 2388PI 620 $ 3,918.0014" 2390PI 740 $ 5,593.0016" 2391PI 1,035 $ 7,453.0018" 2392PI 1,540 POA20" 2393PI 1,835 POA24" 2394PI 2,475 POA
745 WITH POSITION INDICATOR- 45˚ Seat Flo-Flex®,Swing Check Valve Epoxy coated Ductile Iron Body, ANSI B16.1,class 125, ANSI/AWWA C508, Buna-N Coated Disc.Temp Max: 140°F (60C) Pressure Max: 250 PSI
745BFPI Discount Code B
High Quality Valves Built to Last... www.flomatic.com
SWING CHECK VALVES 800.833.2040
Note: Other seals are available thatare chemically resistant especially tochloramines. Please consult factory.
• Fusion Epoxy Coated Ductile Iron Body• Buna-N Coated Disc.• Optional Backflush Device Available• Optional Disc Position Indicator Available• Optional Proximity Switch Model 745PS • Optional Stainless Steel Fasteners
745 Features
745LS Discount Code B
Backflush device (Model 745BF)
Valve Disc PositionIndicator (Model 745PI)
Limit Switch
Add “S” to end of part number for Stainless Steel fasteners. 10% mark up.
745 WITH LIMIT SWITCH (SPDT) - 45˚ Seat Flo-Flex®,Swing Check Valve Epoxy coated Ductile Iron Body, ANSI B16.1,class 125, ANSI/AWWA C508, Buna-N Coated Disc.Temp Max: 140°F (60C) Pressure Max: 250 PSI
26385 Flomatic pricelist 13_Danfoss Price List 4/16/13 2:10 PM Page 16
208T- Corrosion resistant PVC body. Threaded female x female connection. NITRILE (Buna-N) self-cleaning ball E-Z access port with NITRILE (Buna-N) seal. Also available with socketweld–change part number from “T” to “S”–same pricing.
Temp Max: 150°F (65C) Pressure Max: 100 PSI
SIZE PART NO. WGT. LIST PRICE1" 2131T 1 $ 46.0011/4" 2132T 1 $ 47.0011/2" 2133T 2 $ 73.002" 2134T 2 $ 73.00
Note: For BSPP threads, change part number from “T” to “P”.NOT FOR GROUND BURIAL.
13
508- Cast iron body with epoxy coating. Threaded female xfemale connection. Corrosion resistant phenolic “Sinking Ball” 2 Bolt access cover. Also available with “Floating Ball” for floodcontrol or air vent–add “FB” to part number and 35% to listprice.
Temp Max: 180°F (80C) Pressure Max: 150 PSI
SIZE PART NO. WGT. LIST PRICE1" 3232 3.5 $ 180.0011/4" 3233 4.5 $ 183.0011/2" 3234 6 $ 185.002" 3235 8 $ 225.0021/2" 3236 11.5 $ 539.003" 2044 30 $ 525.004"* 2045* 45 $ 961.00
Note: 3" and 4", has no access cover, quick disconnect valve
system.
*Connection is flanged ANSI 125.
508 Discount Code B
408 & 4082- Cast iron body with epoxy coating and access port,flanged connection ANSI B16.1, class 125. NITRILE (Buna-N) coveredmetal ball. “Sinking Type”, stainless steel fasteners. Also available with“Floating Ball” for flood control or air vent–add FB to part numberand 35% to list price. “Standard of the Wastewater Industry”
Temp Max: 180°F (80C) Pressure Max: 150 PSISIZE PART NO. WGT. LIST PRICE3"* 2144–2* 45 $ 616.004"* 2145–2* 62 $ 770.005" 2143 90 $ 1,518.006" 2146 102 $ 1,575.008" 2147 218 $ 2,951.0010" 2148 355 $ 6,939.0012" 2149 624 $ 9,911.0014" 2150 882 $14,864.00
*New 4082 model meets AWWA C508 flange to flange lay lengths,and are ductile iron.
408 & 4082 Discount Code B
208- Cast iron body with epoxy coating and clean-out port.Threaded female x female connection. Features NITRILE (Buna-N)“Sinking Ball”.
Temp Max: 180°F (80C) Pressure Max: 150 PSI
SIZE PART NO. WGT. LIST PRICE11/4" 2141 4.5 $ 91.0011/2" 2142-0 9.5 $ 117.002" 2142 9 $ 117.00
408PRX & 4082 PRX Discount Code B
408PRX & 4082 PRX- Model 408 ball check valve with aproximity switch.
Temp Max: 180°F (80C) Pressure Max: 150 PSI
SIZE PART NO. WGT. LIST PRICE3"* 2144–2PRX* 45 $ 1045.004"* 2145–2PRX* 62 $ 1199.005" 2143PRX 90 $ 1,947.006" 2146PRX 102 $ 2,136.008" 2147PRX 218 $ 3,380.0010" 2148PRX 355 $ 7,368.0012" 2149PRX 624 $10,399.0014" 2150PRX 882 $15,369.00
*New 4082 model meets AWWA C508 flange to flange lay lengths,and are ductile iron.
77- Auto-Vac® Vacuum Breaker - This 1” valve is avail-able in bronze, stainless steel, and PVC. All internal parts areengineered composite, with a stainless steel disc and resilient seat.Used to prevent water hammer in wastewater valves.Temp Max: 180°F (80C) Pressure Max: 400 PSI
MATERIAL PART NO. CASE QTY. LIST PRICE PVC 4701P 12 $ 56.52Stainless Steel 4701SS 12 $ 69.87
77 Discount Code B
208T Discount Code B208 Discount Code B
Horizontal installationrequires a 20’ statichead on Ball Checks
Recommended for flowvelocity of 3’ to 5’ per sec. For higher
flow, consult factory.
BALL C
HECK VALVES 8
00.833.2040
www.flomatic.com High Quality Valves Built to Last...
ARRA-Compliant
Pictured withoptional Auto-Vac®.
Add 77 to the endof part number.
208B Discount Code B
208B- Same as Model 208 with bosses for rail mounting. Castiron body with epoxy coating and clean-out port. Threaded femalex female connection. Features NITRILE (Buna-N) “Sinking Ball”.
Temp Max: 180°F (80C) Pressure Max: 150 PSI
SIZE PART NO. WGT. LIST PRICE11/4" 2141B 5 $ 92.0011/2" 2142-0B 10 $ 118.002" 2142B 10.5 $ 118.00
VERTICAL MOUNTINGSeat up
HORIZONTALMOUNTINGLodging of the ball below the axis. The arrow showsthe direction in which theliquid is rising.
OPERATION OF “THE FLOATING BALL”APPLICATIONS for Model 408FBTO AVOID OVERFLOW OF WATER RISING AND ALSO ALLOW GAS EVACUATION IN FILLING OF TANKS OR PIPES (AIR-VENT).
OPTIONAL FLOATING BALL
26385 Flomatic pricelist 13_Danfoss Price List 4/16/13 2:10 PM Page 17
14
100MP- High-strength Noryl® GTX 830 Body with NITRILE(Buna-N) seal and polypropylene follower. Threaded male xfemale connection.
Temp Max: 150°F (65C) Pressure Max: 300 PSI
SIZE PART NO. CASE QTY. LIST PRICE11/4"M x 1"F 4221MP 49 $ 19.0011/4"M x 11/4"F 4242MP 49 $ 24.00
Note: For BSP and BSPP threads CONSULT FACTORY.
901- Non-corrosive acetal body and guide. Insert connection.Features NITRILE (Buna-N) seal and stainless steel spring.
Temp Max: 180°F (80C) Pressure Max: 150 PSI
SIZE PART NO. WGT. LIST PRICE3/8" 2011 .1 $ 9.401/2" 2000 .18 $ 9.503/4" 2001 .35 $ 11.001" 2030 .5 $ 16.50
100MP Discount Code A 901 Discount Code A
The 297D- is an acetal body. Threaded female x female construction. Features a VITON seal, Nylon 11 poppet and stainless steel spring.
Temp Max: 180°F (80C) Pressure Max: 150 PSI
SIZE PART NO. WGT. LIST PRICE3/8" 5359 .04 $ 28.001/2" 5239 .06 $ 35.00
The 290P is a Polypropylene body and poppet with stainlesssteel spring and VITON seal.
SIZE PART NO. WGT. LIST PRICE3/8" 5356 .04 $ 31.00 1/2" 5357 .06 $ 33.003/4" 5358 .06 $ 57.00
297D/290P Discount Code A
FLOMATIC VALVES IS AN ACTIVE MEMBER INTHESE INDUSTRY ASSOCIATIONS AND OTHERS VISIT
OUR WEBSITE AT
www.flomatic.comUpdated Daily!
High Quality Valves Built to Last... www.flomatic.com
PLA
STIC CHECK VALVES 800.833.2040
Insert connection used in conjunction with a water meterwhen protection from contamination is required.
PRODUC T A P P L I C AT I ON 9 0 1
OUR WEBSITE NOW FEATURING:
LIVECHAT
3DANIMATIONS
SHIPMENTTRACKING
UPDATEDPRODUCTAPPROVAL
MODEL 901
WATER METER
www.flomatic.com
www.watersystemscouncil.org
26385 Flomatic pricelist 13_Danfoss Price List 4/16/13 2:10 PM Page 18
BUTTE
RFLY VALVES 8
00.833.2040
15www.flomatic.com
KWIK-CLOSE® Discount Code B
SERIES 6000 (NICKEL PLATED DUCTILE IRON DISC)Wafer Style butterfly valve,cast iron body. Seat Liner EPDM standard ISO top flange. 10 position lever handle.
Working Temp: Max+230°F (+110C) Pressure Max: 200 PSI
SIZE SERIES 6000 WGT.LIST PRICE
LEVER HANDLE
2" 6102000 8 $ 54.003" 6103000 9 $ 65.004" 6104000 13 $ 75.006" 6106000 18 $ 125.008" 6108000 37 $ 198.0010" 6110000 51 $ 299.0012" 6112000 68 $ 399.0014"* 149U003685 80 $ 699.0016"* 149U003686 137 $ 960.00
SIZE PART NO. WGT. LIST PRICE(Ductile Iron Disc) WITH GEAR
3" 450100060 434" 450100070 54 6" 450000090 748" 450000100 13410" 450000110 188 12" 450000120 261 14" 450000140 380 16" 450000160 414 18" 450000180 532 20" 450000200 653 24" 450000240 739
$ 475.00$ 569.00$ 719.00$ 1,029.00$ 1,378.00$ 2,085.00$ 2,700.00$ 3,786.00$ 3,989.00$ 4,600.00$ 7,200.00
®
*Polyamide Coated DI Disc.,Gear Operated
FLANGED BUTTERFLY VALVESMunicipal Water & Waste WaterAWWA C504:
• Proof of design available upon request.
• Metal certification uponrequest.
• Fusion epoxy paint
• V-type packing
• Seat Buna-N
• Ductile Iron disc, 316SS edge
MODEL 45 (Lever Operated) - Cast ductile iron flangedbody. ASTM A536 Cast ductile iron disc with stainless type 316edge. Seat, standard NBR (EPDM optional) bonded and vulcanized.Designed to AWWA standard C504, class 150B. Electric/pneumatic actuation available.
Working Temp: Max+180°F (82C) Pressure Max: 200 PSI SIZE PART NO. LIST PRICE
WITH LEVER
3" 450100061 $ 449.004" 450100071 $ 549.006" 450100091 $ 699.00
AZURE® Discount Code B
MODEL 45 - Electric actuated, Azure® butterfly valve, 110 vac power, manual handwheel override for open/closeservice.
SIZE PART NO. WGT. LIST PRICE(Ductile Iron Disc) WITH GEAR
3" 4501000620000 61 $2,129.004" 4501000720000 72 $2,271.006" 4500000920000 82 $2,912.008" 4500001020000 165 $3,808.0010" 4500001120000 220 $4,575.0012" 4500001220000 300 $5,570.0014" 4500001420000 72 $6,670.0016" 4500001620000 82 $9,395.0018" 4500001820000 165 $11,750.0020" 4500002020000 220 POA24" 4500002420000 300 POA
*Modulating available POA
AZURE® BUTTERFLYw/ACTUATOR Discount Code BAZURE® Discount Code B
MODEL 45 (Gear Operated) - Ductile iron flanged body. ASTM A536 ductile iron disc with stainless type 316 steel edge. Seat, standard NBR (EPDMoptional)vulcanized.Designed toAWWA standard C504,class150B. Electric/pneumatic actuationavailable.
Working Temp: Max+180°F (82C) Pressure Max: 200 PSI
SMART CARD Discount Code B
SMART CARD - New digital high resolution controller foruse in the Flomatic FCEL Series Electric Actuators.
The DHC-100 is a high resolution controller/positioner:
• for use in the FCEL series AC electric actuators
• with operating times from 2 to 120 seconds
• that can be configured for various command types (4-20mA,1-5V, 0-5V, 0-10V, or a digital command) and a fail positionon loss of signal
With its modular design a variety of options are easily pluggedin providing other features. A wide range of data is accessiblethrough a digital communications module providing additionalcontrol and information.
26385 Flomatic pricelist 13_Danfoss Price List 4/16/13 2:10 PM Page 19
www.flomatic.comHigh Quality Valves Built to Last...
BUTTERFLY VALVES 800.833.2040
16
SYLAX® LUG (DI) Discount Code B SYLAX®WAFER (DI) Discount Code BOPTIONS:OPTIONS:
• Gear
• Explosion & Water Proof
• Auxiliary limit switches
• Shaft extensions
• Valve disc position indicator
OPTIONAL SEATS:OPTIONAL SEATS:• Buna-N
• Viton
• PTFE (Different valve body)
SYLAX®WAFER (SS) Discount Code BGEAROPERATOR Discount Code B
149G (DUCTILE IRON DISC) - SYLAX®Full Lug Series Castiron body with epoxy coated ductile iron disc. Seat Liner EPDM(Buna-N optional) with standard ISO top flange for direct mounting of actuator.
Working Temp: Max+230°F (+110°C) Pressure Max: 200 PSI SIZE PART NO. WGT LIST PRICE LIST PRICE
(Ductile Iron Disc) WITH LEVER WITH GEAR
2" 149G 037290 9 $ 116.89 $ 235.9021/2" 149G 037291 11 $ 122.68 $ 237.273" 149G 037292 12 $ 132.16 $ 254.764" 149G 037293 19 $ 178.94 $ 319.635" 149G 037294 22 $ 225.86 $ 342.046" 149G 037295 26 $ 272.56 $ 401.878" 149G 037296 51 $ 383.64 $ 548.2610" 149G 037297 61 $ 524.64 $ 733.9412" 149G 037299 93 $ 645.12 $ 839.92
Up to 24” available CONSULT FACTORY.
149G (DUCTILE IRON DISC)- SYLAX®Wafer Style Series Cast iron body with epoxy coated ductile iron disc. Seat Liner EPDM (Buna-N optional) with standard ISO top flange for direct mounting of actuator.
Working Temp: Max+230°F (+110°C) Pressure Max: 200 PSISIZE PART NO. WGT LIST PRICE LIST PRICE
(Ductile Iron Disc) WITH LEVER WITH GEAR
2" 149G 010894 8 $ 104.28 $ 205.1421/2 " 149G 010909 8 $ 115.83 $ 216.683" 149G 010928 9 $ 128.64 $ 229.494" 149G 010955 13 $ 149.49 $ 258.985" 149G 010989 17 $ 201.95 $ 311.456" 149G 011005 18 $ 229.25 $ 338.748" 149G 016257 37 $ 287.36 $ 439.7910" 149G 41010 51 $ 443.82 $ 596.2512" 149G 023900 73 $ 586.15 $ 787.55
Up to 24” available CONSULT FACTORY.
149G (316SS DISC)- SYLAX®Wafer Style Series - Cast iron body with 316 stainless steel disc. Seat Liner EPDM (Buna-N optional) with standard ISO top flange for direct mounting of actuator.
Working Temp: Max+230˚F (+110˚C) Pressure Max: 200 PSISIZE PART NO. WGT LIST PRICE LIST PRICE
(316SS Disc) WITH LEVER WITH GEAR
2" 149G 011266 8 $ 128.04 $ 228.9021/2" 149G 011287 8 $ 137.60 $ 238.453" 149G 011297 9 $ 155.66 $ 256.524" 149G 011316 13 $ 188.45 $ 297.945" 149G 011334 17 $ 239.05 $ 348.556" 149G 011343 18 $ 271.13 $ 380.638" 149G037308 37 $ 493.05 $ 622.0010" 149G 013612 51 $ 825.94 $ 939.0412" 149G037310 57 $1,037.13 $1,352.70
Up to 24” available CONSULT FACTORY.
SYLAX® LUG (SS) Discount Code B
149G (316SS DISC) - SYLAX®Full Lug Series - Cast ironbody with 316 stainless steel disc. Seat Liner EPDM (Buna-N optional) with standard ISO top flange for direct mounting of actuator. Working Temp:Max+230°F (+110°C) Pressure Max: 200 PSISIZE PART NO. WGT LIST PRICE LIST PRICE
(316SS Disc) WITH LEVER WITH GEAR
2" 149G037300 9 $ 169.39 $ 241.7521/2" 149G037302 11 $ 170.76 $ 261.853" 149G037303 12 $ 178.33 $ 277.414" 149G037305 19 $ 235.78 $ 325.815" 149G037306 22 $ 285.23 $ 378.586" 149G037307 26 $ 363.55 $ 452.478" 149G 016281 51 $ 639.94 $ 786.0410" 149G037309 61 $ 851.29 $1,003.7212" 149G023904 93 $1,093.40 $1,273.67
Up to 24” available CONSULT FACTORY.
Gear Operators for Sylax Butterfly ValvesAdd “G” to Lever Operated part number for a gear operated valve. With position indicator on top of gear box.
Up to 24” available CONSULT FACTORY.
26385 Flomatic pricelist 13_Danfoss Price List 4/16/13 2:10 PM Page 20
17
BUTTE
RFLY VALVES 8
00.833.2040
www.flomatic.com High Quality Valves Built to Last...
2" $ 1,774.0021/2" $ 1,779.003" $ 1,790.004" $ 1,871.005" $ 1,894.006" $ 2,357.008" $ 2,990.0010" $ 3,561.0012" $ 4,286.00
Up to 24” available CONSULT FACTORY.
Series 6000
SYLAX® LUG ELECTRIC ACTUATED(DI) Discount Code B
SYLAX® LUG ELECTRIC ACTUATED(SS) Discount Code B BUTTERFLY VALVE
SYLAX®WAFER STYLE SERIES 149GABody: Cast Iron Disc: Epoxy Coated Ductile IronSeat Liner: EPDM
SYLAX®WAFER (DI) ELECTRIC ACTUATED Discount Code B
SYLAX®WAFER (SS) ELECTRIC ACTUATED Discount Code B
SYLAX®WAFER STYLE SERIES 149GABody: Cast IronDisc: 316 Stainless SteelSeat Liner: EPDM
PNEUMATIC ACTUATED
Pneumatic Actuated2”-24”
Double Acting and Spring Return
Price on Application
Butterfly Valves 3"- 24"
AWWA C504
See page 15
CHAINWHEEL OPTION
Chainwheel Option2”-24”
(Use with gear option)
Price on Application
SYLAX®FULL LUG SERIES 149GABody: Cast Iron Disc: 316 Stainless SteelSeat Liner: EPDM
2" 149G 037300A 21/2" 149G 037302A 3" 149G 037303A4" 149G 037305A5" 149G 037306A6" 149G 037307A8" 149G 037308A10" 149G 037309A12" 149G 037310A
Up to 24” available CONSULT FACTORY.
333536464653103125159
333536464653103125159
$ 1,799.00$ 1,807.00$ 1,820.00$ 1,905.00$ 1,937.00$ 2,406.00$ 3,087.00$ 3,736.00$ 4,477.00
SIZE PART NO. WGT. LIST PRICE(316SS Disc)
SIZE PART NO. WGT. LIST PRICE(Ductile Iron Disc)149G010894A149G010909A149G010928A149G010955A149G010989A149G011005A149G016257A149G41010A149G023900A
2" $ 1,790.0021/2" $ 1,796.003" $ 1,810.004" $ 1,893.005" $ 1,921.006" $ 2,388.008" $ 3,051.0010" $ 3,674.0012" $ 4,407.00
Up to 24” available CONSULT FACTORY.
32323337414598115149
SIZE PART NO. WGT. LIST PRICE(316SS Disc)
149G011266A149G011287A149G011297A149G011316A149G011334A149G011343A149G016281A149G013612A149G023904A
2" $ 1,782.0021/2" $ 1,788.003" $ 1,799.004" $ 1,881.005" $ 1,907.006" $ 2,372.008" $ 3,021.0010" $ 3,617.0012" $ 4,337.00
Up to 24” available CONSULT FACTORY.
SYLAX®FULL LUG SERIES 149GABody: Cast Iron Disc: Epoxy Coated Ductile IronSeat Liner: EPDM
333536464653103125159
SIZE PART NO. WGT. LIST PRICE(Ductile Iron Disc)149G 037290A149G 037291A149G 037292A149G 037293A149G 037294A149G 037295A149G 037296A149G 037297A149G 037299A
26385 Flomatic pricelist 13_Danfoss Price List 4/16/13 2:10 PM Page 21
18
333E-ENVIRO FOOT VALVE- body with high strength acetal poppet. Tappered stainless steel strainer, end cap, spring and fasteners. NITRILE (Buna-N) seal.
Temp Max: 180°F (80C) Pressure Max: 250 PSISIZE PART NO. WGT. CASE QTY. LIST PRICE
1" 4171E .6 50 $ 45.4811/4" 4172E .8 36 $ 54.87
60SE-ENVIRO FOOT VALVE- body with threaded female connection. Features a NITRILE (Buna-N) seal, acetal poppet (21/2",3" and 4" have bronze poppets) stainless steel spring and strainer.
Temp Max: 180°F (80C)Pressure Max: 250 PSI (1/2" size 150 PSI)SIZE PART NO. WGT. CASE QTY. LIST PRICE
1/2"* 5820E* .1 10 $ 34.243/4" 4100E .3 100 $ 38.241" 4101E .8 50 $ 42.49
11/4"** 4102E** .8 50 $ 48.2211/4" 4103E 1 36 $ 51.2911/2" 4104E 1.6 25 $ 82.752 " 4105E 2.1 16 $ 131.2821/2" 4106E 6 $ 435.073" 4107E 11 $ 599.904" 4108E 19 $ 998.20
*Polyethylene strainer**Model 600S (4102E) will pass through a 2" pipe.
190D- Acetal body and strainer, Nylon 11 poppet.Stainless steel spring and NITRILE (Buna-N) seal.193D- Similar to the 190D with one-piece acetal body and strainer.190P- Polypropylene body and strainer. Stainless steel springand VITON seal.Temp Max: 140°F (60C)
SIZE PART NO. MODEL WGT. CASE QTY. LIST PRICE
3/8" 5619 193D .03 10 $ 17.003/8" 5726 190P .03 10 $ 17.101/2" 5620 193D .03 10 $ 29.001/2" 5727 190P .03 10 $ 31.593/4" 5728 190P .08 10 $ 33.0011/2" 5724 190D .28 6 $ 41.002 " 5725 190D .41 6 $ 85.00
104PS- Features rugged high-strength noryl GTX 830 valve body with a tapered stainless steel, NITRILE (Buna-N) seal andpolypropylene follower.
Temp Max: 140°F (60C) Pressure Max: 150 PSISIZE PART NO. WGT. CASE QTY. LIST PRICE
11/4" 5733PS .21 36 $ 29.00
333DPE-ENVIRO FOOT VALVE- body, but with dual pur-pose male and female threads.
Temp Max: 180°F (80C) Pressure Max: 250 PSISIZE PART NO. WGT. CASE QTY. LIST PRICE
11/4"M x 1"F 4181E .5 50 $ 49.8811/2"M x 11/4"F 4182E .8 36 $ 59.58
333DPE Discount Code A333E Discount Code A60SE Discount Code A
124P- features a simple flow through design with corrosionresistant parts. Durable Nylon body that has a 4 in 1 combo feature (3/4'' – 1-1/2'')
Temp Max: 140°F (60C) Pressure Max: 150 PSISIZE PART NO. WGT. Enters Pipe Size LIST PRICE
3/4" - 11/2" 5728P .25 2'' $ 23.762" 5725P .33 3'' $ 41.05
FLOMATICFLOMATICFREIGHTFREIGHTPOLICYPOLICY
We offer fast delivery
• “A” & “C” Code items: $1,500.00 net prepaid
• “B” Code items: FOB Factory
Minimum Net Order of $75.00
333SS- FOOT VALVE- All 303 Stainless steel body with highstrength acetal poppet. Tappered stainless steel strainer, end cap,spring and fasteners. NITRILE (Buna-N) seal.
Temp Max: 180°F (80C) Pressure Max: 250 PSISIZE PART NO. WGT. CASE QTY. LIST PRICE
1" 4171SS .6 50 $ 54.1511/4" 4172SS .8 36 $ 65.32
333SS Discount Code A
104P- Reinforced nylon body with threaded female connection.Polyethylene strainer, polyethylene/acetal poppet. NITRILE (Buna-N) seal and stainless steel spring.
Temp Max: 150°F (65C) Pressure Max: 150 PSISIZE PART NO. WGT. CASE QTY. LIST PRICE
3/4 " 5731 .08 10 $ 16.001" 5732 .13 50 $ 19.0011/4" 5733 .21 36 $ 26.00
124P Discount Code A
190D/193D/190P Discount Code A
High Quality Valves Built to Last... www.flomatic.com
FOOT VALVES 800.833.2040
104P Discount Code A 104PS Discount Code A
26385 Flomatic pricelist 13_Danfoss Price List 4/16/13 2:10 PM Page 22
19
812XTF- All 316 stainless steel, threaded female connection.Metal to metal seating and teflon O-ring.2"-4" available with socket weld connection.Consult factory forpricing.11/2"-4" available with NITRILE (Buna-N) or VITON seal,add 10% to list (Model 812XRF/812XVF).Temp Max: 400°F (200C) Pressure Max: 300 PSI
SIZE PART NO. WGT. LIST PRICE1/2 " 2420XTF 2 $ 300.003/4 " 2421XTF 4 $ 370.001" 2422XTF 5 $ 551.0011/4" 2423XTF 9 $ 671.0011/2" 2424XTF 12 $ 744.002" 2425XTF 14 $ 885.0021/2" 2426XTF 14 $ 1,548.003" 2427XTF 25 $ 1,783.004" 2428XTF 39 $ 2,030.005" 2429XTF 62 $ 4,323.006" 2430XTF 80 $ 5,148.008" 2431XTF 140 $ 9,000.00
63- Cast iron body with epoxy coating. Features threaded femaleconnection. NITRILE (Buna-N) seal, high strength non-metallic orunleaded bronze or ductile iron poppet, stainless steel spring.Heavy duty polyethylene strainer.Temp Max: 180°F (80C) Pressure Max: 250 PSI
SIZE PART NO. WGT. LIST PRICE2"* 4764 4 $ 79.3121/2" 4765 5 $ 134.173" 4766 9 $ 171.874" 4767 17 $ 219.086"** 4789 36 $ 704.34
*2" Acetal guide.
2 1/2" - Unleaded bronze guide. 3"-6" Ductile iron poppet.** Galvanized Strainer Only.For Municipal applications see 302BT below
357- Cast iron body and strainer. Threaded female connection.Hinged leather seat.Temp Max: 80°F (27C) Pressure Max: 75 PSI
SIZE PART NO. WGT. LIST PRICE11/4" 4962 3 $ 156.7011/2" 4963 3 $ 157.002" 4964 6 $ 163.383" 4966 13 $ 272.444" 4967 20 $ 377.926" 4969 45 $ 638.658" 4970 99 $ 1,265.38
357 Discount Code A 63 Discount Code B 812XTF Discount Code B
812XFF- All 316 stainless steel. Flanged connection ANSI 150.Metal to metal seating and teflon O-ring.11/2"- 4" available with NITRILE (Buna-N) or VITON seal, add 10% to list (Model 812XRF/812XVF).Temp Max: 300°F (150C) Pressure Max: 275 PSI
SIZE PART NO. WGT. LIST PRICE1/2 " 2420XFF 2.5 $ 380.003/4 " 2421XFF 4.6 $ 488.001" 2422XFF 5.7 $ 733.0011/4" 2423XFF 9.8 $ 840.0011/2" 2424XFF 13 $ 949.002" 2425XFF 15 $ 1,251.0021/2" 2426XFF 13 $ 1,726.003" 2427XFF 27 $ 2,053.004" 2428XFF 43 $ 2,801.005" 2429XFF 65 $ 5,591.006" 2430XFF 85 $ 7,450.008" 2431XFF 150 $12,559.00
Consult factory for temp. & pressure rating.
812XFF Discount Code B
302BT- Cast iron body with epoxy coating, bronze disc and seat(2"-12"). Flanged connection ANSI B16.1, class 125. Features aBuna and stainless steel strainer.Temp Max: 180°F (80C)Pressure Max: 200 PSI: 2"-12", 150 PSI: 14"-24"
SIZE PART NO. WGT. LIST PRICE2" 4763BT 23 $ 925.0021/2" 4768BT 30 $ 935.003" 4769BT 37 $ 940.004" 4770BT 63 $ 1,111.005" 4771BT 80 $ 1,509.006" 4772BT 100 $ 1,694.008" 4774BT 160 $ 2,500.0010" 4775BT 260 $ 3,432.0012" 5416BT 410 $ 4,800.0014" 5417BT 500 $ 9,200.0016" 5418BT 650 $ 11,600.0018" 5419BT 850 $ POA20" 5420BT 1050 $ POA24" 5422BT 1440 $ POA
Also available as model 302S6T with 316SS trim and model 302S6 all 316SS design.
302BT Discount Code B
80S6F - Foot Valve- All 316 stainless steel threaded check valvebody. Stainless steel spring, poppet, strainer and VITON seal.Temp Max: 400°F (200°C) Pressure Max: 400 PSI
SIZE PART NO. WGT. LIST PRICE1" 4031S6F 2.1 $ 225.0011/4" 4032S6F 2.4 $ 290.0011/2" 4033S6F 5.0 $ 299.002" 4034S6F 7.0 $ 499.003" 7938S6F 15 $ 1,055.004" 7939S6F 30 $ 1,650.006" 4089S6F 75 $ 6,458.008" 4090XSSF 105 $ 8,151.0010" 4091XSSF 190 $14,100.00
80S6F Discount Code A
FOOT V
ALVES 8
00.833.2040
www.flomatic.com High Quality Valves Built to Last...
REFER TO PAGE 34 FOR LOCAL SALES REPS BY STATE
26385 Flomatic pricelist 13_Danfoss Price List 4/16/13 2:10 PM Page 23
20
6P STRAINER- Plastic (polyethylene) with male NPT threads.Converts a check valve to a foot valve. (See picture above).Temp Max: 180°F (80C)
STRAINER ONLY
SIZE PART NO. WGT. CASE QTY. LIST PRICE
3/4" 4300P .1 25 $ 5.751" 4301P .1 25 $ 6.0211/4" 4302P .2 25 $ 6.7711/2" 4303P .3 10 $ 6.77
6P STRAINER Discount Code A
46 STRAINER- Cast iron body with epoxy coating. Flangedconnection ANSI 125. Plastic or stainless steel strainer.P: Plastic 2"-4"S: Stainless steel 5"-24"
SIZE PART NO. WGT. LIST PRICE2" 5814P 4.7 $ 165.0021/2" 5815P 6.4 $ 167.003" 5816P 8.8 $ 220.004" 5817P 13 $ 350.005" 5821S 16 $ 447.006" 5822S 21 $ 488.008" 5824S 44 $ 728.0010" 5825S 55 $ 1,150.0012" 5826S 80 $ 1,589.0014" 5827S 121 $ 2,524.0016" 5828S 166 $ 3,225.0018" 5829S 211 $ 4,043.0020" 5830S 256 $ 4,177.0024" 5832S 346 $ 5,513.00
46 STRAINER Discount Code B46T STRAINER- Cast iron body with epoxy coating. Threadedfemale connection. Removable polyethylene strainer.Temp Max: 180°F (80C)
SIZE PART NO. WGT. LIST PRICE2" 4364 2.5 $ 87.0021/2" 4365 4 $ 140.003" 4366 8.2 $ 147.004 " 4367 14 $ 199.00
46T STRAINER Discount Code B
16FL STRAINER Discount Code B
16FL STRAINER- All 316 Stainless steel body, flanged with316SS internal strainer. Standard 20 mesh replacement screensoptional 40, 60, 80 and 100 mesh screens (fit inside of 20 mesh).ASME 150 Class.Standard 20 Mesh – if optional 40, 60, 80, or 100 add toend of part number: 40 Mesh = 040 to end of part number
60 Mesh = 060 to end of part number80 Mesh = 080 to end of part number100 Mesh = 100 to end of part number
X in part # below 1 for stainless steel and 2 for carbon
*Temp Max: 800°F *Pressure Max: 600 PSI*See temperature/pressure rating.
STAINLESS CARBONSIZE PART NO. LIST PRICE LIST PRICE1" S0014-X-0300 $ 272.00 $ 341.0011/2" S0154-X-0300 $ 435.00 $ 525.002" S0024-X-0300 $ 607.00 $ 640.003" S0034-X-0300 $ 1,545.00 $ POA4" S0044-X-0300 $ 1,828.00 $ POA
Strainers supplied with FNPT tapped retainer cap for blow off outlet. Strainers supplied with PTFE cap seal.Optional graphite list price cap seal adder: $15.00
16 STRAINER Discount Code B
16 STRAINER- All 316 Stainless steel body, threaded FNPT“Y-Type” strainer. Standard 20 mesh replaceable screens optional40, 60, 80 and 100 mesh screens (fit inside of 20 mesh).ASME 600 Class.Standard 20 Mesh – if optional 40, 60, 80, or 100 add toend of part number: 40 Mesh = 040 to end of part number
60 Mesh = 060 to end of part number80 Mesh = 080 to end of part number100 Mesh = 100 to end of part number
X in part # below 1 for stainless steel and 2 for carbon*Temp Max: 800°F *Pressure Max: 600 PSI*See temperature/pressure rating.
STAINLESS CARBONSIZE PART NO. LIST PRICE LIST PRICE1/4" S2501-X-0300 $ 125.00 $ 132.003/8" S3751-X-0300 $ 125.00 $ 132.001/2" S5001-X-0300 $ 125.00 $ 132.003/4" S7501-X-0300 $ 150.00 $ 132.001" S0011-X-0300 $ 175.00 $ 157.0011/4" S1251-X-0300 $ 189.00 $ 184.0011/2" S0151-X-0300 $ 227.00 $ 244.002" S0021-X-0300 $ 499.00 $ 260.00
Strainers supplied with FNPT tapped retainer cap for blow off outlet. Strainers supplied with PTFE cap seal. Optional graphite list price cap sealadder: $15.00 Many different types of configurations available.
STRAINER- Unleaded Bronze body, 20 mesh stainless steelstrainer. Furnished with clean out plug.
Pressure Max: 200 PSI WOG125 PSI STEAM
SIZE PART NO. WGT. LIST PRICEThreaded3/8" 8711E .5 $ 32.001/2" 8712E .3 $ 35.003/4" 8713E 2 $ 55.001" 8714E 4 $ 63.0011/4" 87142E 5 $ 112.0011/2" 87143E 6 $ 145.002" 87144E 9 $ 250.00
21/2"* 87145* 15 $ 267.003"* 87146* 25 $ 340.004"* 87147* 95 $ 610.006"* 87148* 185 $ 987.008"* 87149* 299 $ 1,840.00
* Cast iron and flanged connection.
www.flomatic.com
FOOT VALVES &
STRAINERS 800.833.2040
6SE STRAINER- Unleaded bronze body with threaded femaleconnection. Stainless steel strainer with unleaded bronze. Stainlesssteel or plastic caps.
SIZE PART NO. WGT. CASE QTY. LIST PRICE
1/2" 4399E .1 10 $ 29.003/4" 4300E .2 100 $ 32.001" 4301E .6 49 $ 37.00
11/4"* 4302E * .6 36 $ 39.0011/2"* 4303E * 1.2 25 $ 55.002"* 4304E * 2.4 16 $ 99.0021/2" 4305E 3 $ 262.003" 4306E 7.2 $ 379.004" 4307E 14 $ 740.00
* End caps on strainer are plastic.
6SE STRAINER Discount Code A
6SS STRAINER- All 303 stainless steel body with threadedfemale connection. Stainless steel strainer with stainless steel orplastic caps.
SIZE PART NO. WGT. CASE QTY. LIST PRICE
1" 4301SS .6 49 $ 49.0011/4" 4302SS .6 36 $ 59.00
6SS STRAINER Discount Code A
STRAINERS Discount Code C
26385 Flomatic pricelist 13_Danfoss Price List 4/16/13 2:10 PM Page 24
21
Rugged Dependability• Model C, full port globe style• Model CF, reduced cavitation configuration• Model CA, angle style• Model CFA, reduced cavitation angle body
configurationAlways with these standard features...• Fusion Epoxy coating – internal & external• Copper tubing (ss optional)• Control tubing shutoff valves• Gauge cocks
• Valve Trim – Unleaded Bronze (11⁄4''–10'') or Stainless Steel (12''& up)
• Body drain plugs• EZ off Jack screw covers & seat ringsCan be equipped with these popular options• Dual power chamber• Built-In check feature• Unleaded Pilots or Stainless Steel• Electronic controls• New optional SS-trim
Model CA• Angle body globe style
(flanged or threaded)
Model CF• Reduced port globe style
(flanged or threaded)
Model C• Full port globe style
(flanged or threaded)
• Pressure Reducing Valve• Modulating Altitude Valve • Non-Modulating Altitude Valve • Back Pressure Sustaining Valve• Pressure Relief Valve• Surge Arrestor Valve• Pump Control Valve• Pilot Operated Float Valve• Solenoid Control Valve• Flow Control• Hydraulic Check Valve
CHECK THESE FEATURES...
SEVERALDIFFERENT SERIES...
4 Different Body Configurations.
Model CFA• Angle body, reduce port
globe style (flanged or threaded)
CONTROL V
ALVES 8
00.833.2040
www.flomatic.com High Quality Valves Built to Last...
Up to 36''
26385 Flomatic pricelist 13_Danfoss Price List 4/16/13 2:10 PM Page 25
BACK PRESSURE SUSTAINING VALVE - Sustains a minimum upstream pressure to prevent overdrafting the supply. CONSULT FACTORY for control valve price list for specific options.
11/4" $1,27811/2" $1,286 $ 1,514 $ 1,5612" $1,316 $ 1,541 $ 1,61221/2" $1,635 $ 1,692 $ 1,750 $ 1,8683" $ 1,883 $ 1,890 $ 1,9784" $ 1,983 $ 2,561 $ 2,7336" $ 2,760 $ 3,754 $ 4,0338" $ 4,338 $ 6,141 $ 6,65610 $ 6,381 $ 8,486 $ 9,23612" $ 10,651 $ 13,819 $ 14,38214" $ 14,182 $ POA $ POA16” POA $ 22,501 $ POA18" POA $ POA $ POA20" $ 27,165 $ POA $ POA
* Reduced cavitation configuration.
22
C301/CA301 Discount Code B
C101 THREADED/CF101/C101/CA101/C103 C103 Discount Code BDiscount Code B
PRESSURE REDUCING VALVE WITH CHECK - Reduceshigh upstream pressure to lower downstream pressure. CONSULTFACTORY for control valve price list for specific options.
11/2" $2,330 $2,200 $2,4652"21/2"3"4"6"8"10"12"6"8"10"12"
* Reduced cavitation configuration.
NON-MODULATING ALTITUDE VALVE - Single Acting.Level control of storage tanks, reservoirs, and basins. CONSULT FACTORY for control valve price list for specific options.
SIZE THREADED C/CA C/CACF MODEL* C FLANGED C FLANGED150# 150# 300#
* Reduced cavitation configuration.
C205/CA205 Discount Code B
C/CA C/CA SIZE THREADED CF MODEL* C FLANGED C FLANGED
150# 150# 300#
SIZE C THREADED LIST PRICE CF FLANGED LIST PRICE150# 150#
11/2"
3"
4"
6"
8"
10"
12"
14"
16"
18"
20"
* Reduced cavitation configuration.
C101B0B00100
C101C0B00100
C101D0B00100
C101E0B00100
$1,208$1,230$1,240$1,545 $ 1,544
$ 1,576$ 1,681$ 2,557$ 4,137$ 6,060$10,375$14,132
POAPOA
$27,115
SIZE C/CAC THREADED
LIST PRICE LIST PRICECF FLANGED*150#
11/4"
21/2 "
2"21/2 "
2"
PRESSURE REDUCING VALVE - Reduces high upstream pressure to lower downstream pressure. CONSULT FACTORY for control valve price list for specific options.
SIZE C THREADED LIST PRICE CF FLANGED LIST PRICE150# 150#
11/2"
3"
4"
6"
8"
10"
12"14"
16"
18"20"
C101C1B00100
C101D1B00100
C101E1B00100
C101F1B00100
C101G1B00100
C101J1B00100
C101K1B00100
C101L1B00100
C101M1B00100C101N1B00100C101O1B00100
C101P1B00100C101Q1B00100
$ 1,316$ 1,561$ 1,638$ 1,676$ 2,154$ 3,402$ 5,704$ 8,127$13,365POA
$22,451POAPOA
$ 1,516$ 1,633$ 1,856$ 1,894$ 2,326$ 3,680$ 6,218$ 8,876$13,928
POAPOAPOAPOA
SIZE LIST PRICE LIST PRICE
C101C2B00100
C101D2B00100
C101E2B00100
C101F2B00100
C101G2B00100
C101J2B00100
C101K2B00100
C101L2B00100
C101M2B00100C101N2B00100C101O2B00100
C101P2B00100C101Q2B00100
C/CAC FLANGED150#
C/CAC FLANGED
300#
$ 1,694$ 1,726$ 1,831$ 2,707$ 4,287$ 6,210$10,525$14,282
POAPOA
$27,265
$ 1,380$ 1,390$ 1,695
$ 1,666$ 1,783$ 2,006$ 2,044$ 2,476$ 3,830$ 6,368$ 9,026$14,078
POAPOAPOAPOA
$ 1,466$ 1,711$ 1,788$ 1,826$ 2,304$ 3,552$ 5,854$ 8,277$13,515
POA$22,601
POAPOA
High Quality Valves Built to Last... www.flomatic.com
CONTROL VALVES 800.833.2040
11/2"2"21/2"3"4"6"8"10"12”14”16”18”20”
11/2" $ 3,121 $ 3,345 $ 3,5792" $ 3,439 $ 3,521 $ 3,76821/2" $ 3,724 $ 3,500 $ 3,898 $ 4,1713" $ 3,620 $ 3,946 $ 4,2234" $ 4,267 $ 4,617 $ 4,9406" $ 4,802 $ 5,715 $ 6,1158" $ 6,141 $ 8,215 $ 8,79010" $ 8,296 $ 9,063 $ 9,69712" $12,589 $13,779 $14,74414" $15,632 POA POA16" POA $23,951 POA18" POA POA POA20" $ 26,615 POA POA
CF101E1B00100
CF101F1B00100
CF101G1B00100
CF101J1B00100
CF101K1B00100
CF101L1B00100
CF101M1B00100
CF101N1B00100
CF101O1B00100
CF101P1B00100
CF101Q1B00100
C/CAC FLANGED
300#CF MODEL*150#
SIZE THREADEDC/CA
C FLANGED150#
C201/CA201 Discount Code B
MODULATING ALTITUDE VALVE - Single acting level control with modulation for final filling of storage tanks. CONSULT FACTORY for control valve price list for specific options.SIZE THREADED CF MODEL* C/CA C/CA
150# C FLANGED C FLANGED150# 300#
11/2" $2,330 $2,200 $2,4652"21/2"3"4"6"8"10"12"6"8"1"12"
* Reduced cavitation configuration.
$ 3,500$ 3,620$ 4,267$ 4,802$ 6,141$ 8,296$12,589$15,632
POAPOA
$28,615
$ 3,121$ 3,439$ 3,724
$ 3,579$ 3,767$ 4,171$ 4,223$ 4,940$ 6,115$ 8,790$ 9,697$14,744
POAPOAPOAPOA
$ 3,246$ 3,521$ 3,898$ 3,946$ 4,617$ 5,715$ 8,215$ 9,063$13,779
POA$23,951
POAPOA
11/2"2"21/2"3"4"6"8"10"12”14”16”18”20”
C/CA C/CASIZE THREADED CF MODEL* C FLANGED C FLANGED
150# 150# 300#
NEW LARGER SIZES IN STOCK – 16”, 20”, & 30”
26385 Flomatic pricelist 13_Danfoss Price List 4/16/13 2:10 PM Page 26
C701/CA701 Discount Code B
C601/CA601 Discount Code B
C601DP Discount Code B
C501/CA501 Discount Code B
CONTACT FACTORY FOR l COMPLETE PRICE LISTS l CONTROL VALVE TECHNICAL BINDERl CD DISC
23
CONTROL V
ALVES 8
00.833.2040
www.flomatic.com
SURGE ARRESTOR VALVE - Provides relief protection against pressure surges during pump start up, shut down, or powerfailure.CONSULT FACTORY for control valve price list for specific options.
SIZE C THREADED CF FLANGED* C FLANGED C FLANGED150# 150# 300#
11/2" $ 3,364 $ 3,994 $ 4,2202" $ 3,829 $ 4,204 $ 4,44221/2 $ 4,192 $ 4,126 $ 4,458 $ 4,6893" $ 4,267 $ 4,473 $ 4,7074" $ 4,515 $ 4,766 $ 4,9366" $ 5,143 $ 5,877 $ 6,1558" $ 6,647 $ 8,211 $ 8,72610" $ 8,858 $ 11,081 $ 11,83012" $ 13,784 $ 16,295 $ 16,85814" $ 16,632 POA POA16" POA $ 24,951 POA18" POA POA POA20" $ 29,615 POA POA
C601DP Power Chamber- Eliminates pump station pressure surges during start up and shut down. CONSULT FACTORY for control valve price list for specific options.
C/CA C/CASIZE CF FLANGED* C FLANGED C FLANGED
150# 150# 300#
3" $ 3,931 $ 4,507 $ 4,9444" $ 4,419 $ 4,813 $ 5,4466" $ 5,655 $ 6,527 $ 7,1968" $ 7,081 $ 9,695 $10,27310" $10,236 $14,929 $16,64812" $17,649 $21,108 $22,54614" $17,132 POA POA16" POA $25,451 POA18" POA POA POA20" $30,115 POA POA
* Reduced cavitation configuration.
PUMP CONTROL VALVE-Eliminates pump station pressuresurges during start up and shut down. CONSULT FACTORY for control valve price list for specific options.
SIZE CF FLANGED* C FLANGED C FLANGED150# 150# 300#
11/2" $ 3,246 $ 3,4502" $ 3,521 $ 3,76721/2" $ 3,500 $ 3,898 $ 4,1713" $ 3,640 $ 4,004 $ 4,4044" $ 4,196 $ 4,426 $ 5,0756" $ 5,236 $ 5,950 $ 6,3678" $ 6,662 $ 7,399 $ 8,06810" $10,832 $12,309 $ 14,50712 $15,704 $17,845 $ 19,09414" $15,632 POA POA16" POA $23,951 POA18" POA POA POA20" $28,615 POA POA
* Reduced cavitation configuration.
C/CA C/CA
C/CA C/CA
* Reduced cavitation configuration.
PILOT OPERATED FLOAT VALVE - For level control of storagetanks, reservoirs, or basins. CONSULT FACTORY for control valve price list for specific options.
C/CA C/CASIZE C THREADED CF FLANGED* C FLANGED* C FLANGED*
150# 300#
11/4" $1,59011/2" $1,590 $ 1,716 $ 1,9162" $1,618 $ 1,961 $ 2,03321/2" $1,932 $ 1,944 $ 2,038 $ 2,1763" $ 1,976 $ 2,076 $ 2,2524" $ 2,081 $ 2,690 $ 2,8636" $ 2,957 $ 3,802 $ 4,0808" $ 4,537 $ 6,104 $ 6,61810" $ 6,460 $ 8,527 $ 9,27612" $10,775 $13,765 $14,32814" $14,132 POA POA16" POA $22,451 POA18" POA POA POA20" $27,115 POA POA
* Reduced cavitation configuration.
Model CA Angle body valvesame pricing as Model C
Model CFA Angle body valvesame pricing as Model CF
Made inUSA____ARRA-
Compliant
PRESSURE RELIEF VALVE - Protects against excessivepresssure. CONSULT FACTORY for control valve price list for specific options.
SIZE C THREADED CF FLANGED* C FLANGED C FLANGED150# 150# 300#
11/4" $ 1,27811/2" $ 1,286 $ 1,514 $ 1,5612" $ 1,316 $ 1,541 $ 1,61221/2" $ 1,635 $ 1,692 $ 1,750 $ 1,8683" $ 1,883 $ 1,890 $ 1,9774" $ 1,983 $ 2,561 $ 2,7336" $ 2,760 $ 3,754 $ 4,0338" $ 4,338 $ 6,141 $ 6,65610" $ 6,381 $ 8,486 $ 9,23612" $10,651 $ 13,819 $ 14,38214" $14,182 POA POA16" POA $ 22,501 POA18" POA POA POA20" $27,165 POA POA
* Reduced cavitation configuration.
C401/CA401 Discount Code B
C/CA C/CASIZE C THREADED CF FLANGED* C FLANGED C FLANGED
150# 150# 300#
26385 Flomatic pricelist 13_Danfoss Price List 4/16/13 2:10 PM Page 27
24 www.flomatic.com
CONTROL VALVES 800.833.2040
C1001/CA1001 Discount Code B
HYDRAULIC CHECK VALVE - Closes to prevent flow revesal.Adjustable opening & closing speed controls. CONSULT FACTORY for control valve price list for specific options.
SIZE C THREADED CF FLANGED* C FLANGED C FLANGED150# 150# 300#
11/4" $ 1,10811/2" $ 1,150 $ 1,216 $ 1,4162" $ 1,219 $ 1,461 $ 1,53321/2" $ 1,479 $ 1,444 $ 1,581 $ 1,7953" $ 1,579 $ 1,665 $ 1,8794" $ 1,691 $ 2,170 $ 2,3416" $ 2,628 $ 3,302 $ 3,5808" $ 4,319 $ 5,925 $ 6,44010" $ 6,377 $ 8,027 $ 8,77612" $ 10,994 $13,418 $ 13,98314" $ 14,032 POA POA16" POA $ 22,351 POA18" POA POA POA20" $ 27,017 POA POA
C/CA C/CA
FLOW CONTROL VALVE - Maintains a pre-set maximumflow rate regardless of changing line pressures. CONSULT FACTORYfor control valve price list for specific options.
SIZE CF FLANGED* C FLANGED C FLANGED150# 150# 300#
C901/CA901 Discount Code B
11/2" $ 2,370 $ 2,049 $ 3,1612" —— $ 2,113 $ 2,17621/2" $ 2,370 $ 2,962 $ 3,1613" $ 2,406 $ 3,061 $ 3,1774" $ 2,652 $ 3,655 $ 3,8276" $ 3,911 $ 4,884 $ 5,1648" $ 5,636 $ 7,370 $ 7,88510" $ 7,341 $ 10,161 $ 10,91212" $ 14,938 $ 15,50214" $ 14,632 POA POA16" POA $ 22,951 POA18" POA POA POA20" $ 27,615 POA POA
316SS BALL VALVE Discount Code B
316SS BALL VALVE - Full Port, FNPT connection, 2 bolt mounting pad, SS locking handle.Temp Max: 400° F Pressure Max: 1000 PSI
SIZE PART NUMBER LIST PRICE1/4" SSBV1000-02 $ 21.533/8" SSBV1000-03 $ 21.531/2" SSBV1000-05 $ 26.923/4" SSBV1000-07 $ 36.671" SSBV1000-10 $ 54.1411/4" SSBV1000-12 $ 83.7211/2" SSBV1000-15 $ 117.472" SSBV1000-20 $168.29
PRESSURE GAUGES - 2.5 inch dial, 1/4" MPT bottom connection. 1.5% accuracy Full Scale. 304SS case liquid glycoucerfilled bronze tube & connection.
RANGE PART NUMBER LIST PRICE0-100 PSI 2-PG25-100G $20.000-200 PSI 2-PG25-200G $20.000-300 PSI 2-PG25-300G $20.00
PRESSURE GAUGES Discount Code B
C/CA C/CA
$ 11,663
SOLENOID CONTROL VALVE - Remote actuation for valveposition. Specify N.O. (normally open C802); N.C. (normallyclosed C801). CONSULT FACTORY for control valve price list forspecific options.SIZE C THREADED CF FLANGED* C FLANGED C FLANGED
150# 150# 300#
11/4" $1,59011/2" $1,590 $ 1,716 $ 1,9162" $1,618 $ 1,961 $ 2,03321/2" $1,932 $ 1,944 $ 2,038 $ 2,1763" $ 1,976 $ 2,076 $ 2,2524" $ 2,081 $ 2,690 $ 2,8636" $ 2,957 $ 3,802 $ 4,0808" $ 4,537 $ 6,104 $ 6,61810" $ 6,460 $ 8,527 $ 9,27612" $10,775 $13,765 $ 14,32814" $14,132 POA POA16" POA $22,451 POA18" POA POA POA20" $27,115 POA POA
C801-2/CA801-2 Discount Code B
C/CA C/CA
* Reduced cavitation configuration.
$ 2,008$ 2,095 $ 2,216 $ 2,416
2" $ 2,115 $ 2,461 $ 2,53321/2" $ 2,335 $ 2,444 $ 2,538 $ 2,6763 " $ 2,476 $ 2,576 $ 2,7524 " $ 2,761 $ 3,170 $ 3,3556 " $ 3,457 $ 4,302 $ 4,5808 " $ 5,037 $ 6,604 $ 7,118
$ 6,960 $ 9,027 $ 9,776$11,275 $14,265 $14,828
6
PILOT OPERATED FLOAT VALVE - For level control of storage tanks, reservoirs, or basins. CONSULT FACTORY for control valve price list for specific options.
SIZE C THREADED CF FLANGED* C FLANGED C FLANGED150# 150# 300#
C705/CF705 Discount Code B
11/4"11/2"2"21/2"3"4"6"8"10"12"
C/CA C/CA
* Reduced cavitation configuration.
* Reduced cavitation configuration.
* Reduced cavitation configuration.
High Quality Valves Built to Last...
NEW!
NEW!
26385 Flomatic pricelist 13_Danfoss Price List 4/16/13 2:10 PM Page 28
25
CONTROL V
ALVES 8
00.833.2040
PRP-3/8” Pressure Reducing Pilot in UnleadedBronze Enables Automatic Control Valves to reduce inletpressure to a preset outlet pressure and maintain it irregard-less to what fluctuations in flow occur.Temp Max: 180°F (80C) Pressure Max: 400 PSI
* For stainless steel, put “S” before letter and after part number.
BPP - Back Pressure Reducing Pilot in StainlessSteel Enables Automatic Control Valves to sustain a presetinlet pressure. Also enables control valve to relieve pressureupon reaching a preset inlet pressure.Temp Max: 180°F (80C) Pressure Max: 400 PSI
BPP Discount Code B
MINI BALL VALVE Discount Code B
Mini Ball Valve
SOLENOID VALVE-For on off control used to alternatly applypressure to and exhaust pressure from the main valve body cover.Valves are specified either valve body cove. Valves are 3 way120V and are specified either normally open or closed. SIZE PART NO. DESCRIPTION LIST PRICE
1/4” 8853 Open $ 280.001/4” 8862 Closed $ 280.00
* Other types available.
SOLENOID VALVE Discount Code B
CV80S6 CHECK VALVE- All 316SS body with Delrin poppetand Buna-N seal. Threaded female x female connection.Temp Max: 180° F (82 C) Pressure Max: 400 PSISIZE PART NO. LIST PRICE
3/8” 5159 $ 76.411/2” 4029 $ 92.42
CV80S6 Discount Code B
PRP Discount Code B
150#150#
3/8" 149B5369 $ 8.95SIZE PART NO. LIST PRICE
MINI BALL VALVE-Mini ball valves are a quater turn fullported on off isolation valves used on external control valvepilot controls.
152100A152100B152100C152100D
5-80 PSI25-175 PSI2-35 PSI30-300 PSI
$250.00$250.00$250.00$250.00
PART NO. SPRING RANGE LIST PRICE$289.00$289.00$289.00$289.00
LIST PRICESTAINLESS
PART NO. SPRING RANGE LIST PRICE160100SA160100SB160100SC160100SD
5-80 PSI25-125 PSI2-35 PSI30-300 PSI
$350.00$350.00$350.00$350.00
ACP - Accelerator Pilot in Unleaded Bronze - It isused in systems to control flow by applying an independentpressure to the diaphragm. Enables automatic control valvesto rapidly vent water from control diaphragm, thus allowingquicker main valve opening.
Temp Max: Pressure Max: 300 PSI
ACPMODEL 165 Discount Code B
1/2" $280.00SIZE PART NO. LIST PRICE
165200
180°F (80C)
FC4 Discount Code B
FC -20
FLOW CONTROL- Adjustable restrictor that has free flow inthe direction of the arrow on the body and operates as a needle valve in the reverse direction.
3/8" FC4 $ 120.00SIZE PART NO. LIST PRICE
ManufacturingPlant in Upstate
New York
NEW!
TEST COCKS Discount Code B
TEST COCKS- Unleaded Bronze test cocks, full port standard.SIZE PART NO. WGT. CASE QTY. LIST PRICE 1/4"x1/4" 9383397E .05 4 $ 15.70
1/8"x1/4" 9383395E .05 4 $ 15.701/4"x1/4" SAE 9383397ES .06 4 $ 15.701/8"x1/4" SAE 9383395ES .06 4 $ 15.70
Y STRAINER- Unleaded Bronze body, 20 mesh stainlesssteel strainer. Furnished with clean out plug.ction as MeM SIZE PART NO. LIST PRICE1/4" x 3/8" 8710E $ 12.00
Y STRAINER Discount Code B
FLOW LIMITER DEVICE (FLD)- A manual operatingdevice used to restrict the flow on a control valve. It will allowuser to mount on top cover to limit the travel distance of thestem on a control valve. eM SIZE PART NO. LIST PRICEFor 2”valve CIS00D-1 $ 150.00
FLOW LIMITER Discount Code B
www.flomatic.com High Quality Valves Built to Last...
NEW!
26385 Flomatic pricelist 13_Danfoss Price List 4/16/13 2:11 PM Page 29
26High Quality Valves Built to Last... www.flomatic.com
CONTROL VALVE ACCESSORIES 800.833.2040
SIZING GUIDE for THROTTLING VALVESIn order to insure pressure control and avoid excessive noise and maintenance expense, extreme care must be taken when sizing the throttling valve for a specific application. Although both pressure conditions and flow(velocity) are contributing factors, field experience has determined that flow rate is the most critical factor andthat proper valve sizing can be attained through consideration of the flow rate alone.
The maximum flow rates in tables below for Model C (full ported valves) are based on a velocity of 15 feet persecond, fps or (4.6 meter per second, m.s). The throttling valve is capable of handling larger flows for shorterperiods of time; however, the increase in maximum flow should be limited to 25% of the above values. Minimumflow rates are based on 0.5 feet/second flow rate (0.15 meter per second, m/s). Valve should be selected to beopened between 20-30% for best efficiencies and service life. The flow values for Model CF (Reduce portedvalves) in the table below are less as they have smaller valve orifice or seat areas.
The tables below indicate the desired throttling valve size (inches) for designated maximum and minimum flowrates in gallons per minute (GPM):
Valve BodyType (Inch) Flow 11⁄2” 2” 21⁄2” 3” 4” 6” 8” 10” 12” 14” 16” 18” 20” 24” 30” 36”
Model CFull Ported
Min
Max
2.5
90
4
150
7
230
11
340
20
600
40
1,300
80
2,400
120
3,700
180
5,200
240
7,200
300
8,500
400
12,000
500
14,000
700
21,000
1000
32,000
–
–
Model CFReducedPorted
Min
Max
_
_
_
_
_
_
7
160
11
340
30
800
40
1,300
80
2,400
120
3,700
180
5,200
240
7,200
300
9,500
400
12,000
500
14,000
700
21,000
800
32,000
Model CIDiaphragm
Min
Max
–
–
2
110
2
132
2
132
6
264
8
1020
25
1180
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
26385 Flomatic pricelist 13_Danfoss Price List 4/16/13 2:11 PM Page 30
BACK PRESSURE VALVE- Delivers constant pre-set inlet pressure and regulateback-pressure automatically. This is accomplished with and adjustable spring loaded balancing valve factory set to automatically regulate the up-stream pressure to a factory set of 30 psi. For use with geothermal heating system, domestic well water systems, irrigation systems, pressure relief valve function.
Temp Max: 180°F (80C) Pressure Max: 400 PSIFactory set at 30 PSI
Designed for Geo-thermal systems, Artisian wells, anti-flooding,pressure relief, etc.
27
C150EHF HIGH FLOW-PRV / C150E-PR Discount Code A
SIZE PART NO. C150E C150ET
1/2" C150099E $ 110.00 $ 97.003/4" C150000E $ 111.00 $ 97.501" C150001E $ 145.00 $133.0011/4"* C150002E* $331.00 $316.7311/4"** C150002EHF** $ 598.0011/2" C150003E $649.46 2" C150004E $765.21 $613.07
SIZE PART NO. C150E C150ET
1/2" C150199E $ 110.00 $ 97.003/4" C150100E $ 111.00 $ 97.501" C150101E $145.00 $133.00
11/4"* C150102E $ 331.00 $316.7311/4"** C150102EHF** $598.00 11/2" C150103E $ 649.46 $501.512" C150104E $765.21 $613.07
End-ConnectionsModel
C150E Standard Model Unleaded Valve Body Female NPT/Union Female NPT/Male NPT
(No union nut)Female NPT/Male NPT
(No union nut)
Single Union Endw/Female NPT
Unleaded Valve BodyC150ET
Description Inlet Outlet
C155E Discount Code A
Product Specifications• Connection: NPT (Male/Female),or Sweat (see product option chart below) • Max Pressure: 400 PSI (27 bar) • Max Temperature: 1800F (800C) • Pressure Regulating Setting: Factory set at 50 psi • Standard Spring Adjustment range see part number chart
PRESSURE REDUCING VALVE (PRV)- Model C150E when properly installed will regulate highupstream (inlet pressure) to a lower regulated downstream (outlet pressure) constant pressure within arange regardless ofwater flow. This is accomplished by an adjustable spring loaded balancing valve factory set to automatically regulate the downstream pressure.NSF/ANSI 61-2010 Certified by IAPMO R&T, 1⁄2” through 11⁄4”Temp Max: 180°F (80C) Pressure Max: 400 PSIASSE® Listed 1003, IAPMO® listed Factory set at 50 PSICertified for City of Los Angeles
Part numbers are for 15 - 75 PSI range
Part numbers are for 15 - 150 PSI range
C150199EC150100EC150101EC150102E*
C150103EC150104E
SIZE PART NO. PRICE
1" C155001E $ 199.991" F x 11/4" M* C155001ET* $ 194.6011/4" C155002E $380.09
*Dual purpose threads. Male and female on both ends.
Part numbers are for 15 - 75 PSI range
Part numbers are for 15 - 150 PSI range
PRESSURE REDUCING 8
00.833.2040
www.flomatic.com High Quality Valves Built to Last...
*Note: 11/4" size is one size smaller restricted flow. Maximum 30 GPM, see model C150EHF for high-er capacity.**High flow in to 70 GPM
SIZE PART NO. PRICE
1" C155101E $ 199.991" F x 11/4" M* C155101ET* $ 194.6011/4" C155102E $380.09
*Dual purpose threads. Male and female on both ends.
C150EHF C150EPATENT PENDING
26385 Flomatic pricelist 13_Danfoss Price List 4/16/13 2:11 PM Page 31
CONSTANT PRESSURE PUMP CONTROL
$177.65$177.92$209.63$389.56
DIRECT ACTING PUMP CONTROL VALVE WITH TAPPINGS- Reduces rapid pump cycling and maintains a pre-setoperating pressure for wells. Threaded female x female union endor female I.D. x male O.D. on inlet and outlet connections. Featuresa unleaded alloy body & composite bell housing, Nylon reinforcedBuna-N diaphragm. Supplied with two FNPT tailpiece and union nuts.With two (2) 1⁄4” tappings for gage and pressure switch. One (1) 3⁄4”tapping for water tank.
Max:Temp Max: 180°F (80C) Pressure Max 400 PSI
Factory set at 50 PSI
1" CB152001E 15-75 PSI $ 280.001" CB152101E 15-150 PSI $ 280.00
$209.6C152003E $389.5$6
$209.6$389.56
$177.65$177.92$209.63$389.56
C152001ET
C152101ET
28
DIRECT ACTING PUMP CONTROL VALVE- Reduces rapidpump cycling and maintains a pre-set operating pressure for wells.Threaded female x female connection. Features a low lead alloybody & composite bell housing, Nylon reinforced Buna-Ndiaphragm. Supplied with two FNPT tailpiece and union nuts.
Temp Max: 180°F (80C) Pressure Max: 400 PSIFactory set at 50 PSI
CYCLE GARD® IC152E Discount Code A
CYCLE GARD®HY-FLOWC152EHF Discount Code A
DIRECT ACTING PUMP CONTROL VALVE- Reduces rapidpump cycling and maintains a pre-set operating pressure for wells.Threaded female I.D.x male O.D. on inlet and outlet connections.Features a low lead alloy body & composite bell housing, Nylon rein-forced Buna-N diaphragm.
CYCLE GARD® IC152ET Discount Code A
CYCLE GARD®IICN101 Discount Code A
CONSTANT PRESSURE PUMP CONTROL- Reduces rapidpump cycle with field adjustable by-pass and maintains a pre-set operating downstream pressure. Flow 1-5200 GPM depending onsize. For use with domestic water well, municipal water systems,industrial water system, irrigation and agriculture.
Temp Max: 180°F (80C) Pressure Max: 250 PSIFactory set at 60 PSI
SIZE PART NO. LIST PRICE PART NO. LIST PRICETHREADED FLANGED150
CYCLE GARD® IVCB152E Discount Code A
HIGH FLOW DIRECT ACTING PUMP CONTROL VALVE-Model C152EHF reduces rapid pump cycle with field adjustable by-pass and maintains a pre-set operating downstream pressure forwells. Threaded female x female NPT connection with hex end OD.Features a low lead alloy body and cover. Nylon reinforced Buna-Ndiaphragm. Ideal for flows up to 70 GPM.
Temp Max: 180°F (80C) Pressure Max: 400 PSIFactory set at 50 PSI NPT ID x NPT OD
11/4" CN1010B $ 1,28611/2" CN1010C $ 1,286 CN1011C2" CN1010D $ 1,481 CN1011D21/2" CN1010E $ 1,672 CN1011E3" CN1010F $ 2,044 CN1011F4" CN1011G 6" CN1011J8" CN1011K
SIZE PART NO. SPRING RANGE
SIZE PART NO. SPRING RANGE
Temp Max: 180°F (80C) Pressure Max: 400 PSIFactory set at 50 PSI
1 1/4" C152002EHF 15-75 PSI $625.001 1/4" C152102EHF 15-150 PSI $625.00 1" CB152001ET 15-75 PSI $ 245.00
1" CB152101ET 15-150 PSI $ 245.00
15 - 75 PSI15 - 75 PSI15 - 75 PSI15 - 75 PSI15 - 75 PSI
15 - 75 PSI
15 - 150 PSI15 - 150 PSI15 - 150 PSI15 - 150 PSI15 - 150 PSI
15 - 150 PSI
*Note: 11/4” size is one size smaller restricted flow. Maximum 30 GPM. See model C152EHF below for higher capacity.
SIZE PART NO. SPRING RANGE LIST PRICE
SIZE PART NO. SPRING RANGE LIST PRICE
SIZE PART NO. SPRING RANGE LIST PRICE
LIST PRICE
LIST PRICE
$201.10$236.93$440.30$683.74$883.88
LIST PRICE
$225.65
LIST PRICE
$225.65
$201.10$236.93$440.30$683.74$883.88
1"
1"
C152000EC152001EC152002EC152003EC152004E
C152100EC152101EC152102EC152103EC152104E
SIZE
SIZE
PART NO.
PART NO.
SPRING RANGE
SPRING RANGE
$ 1,454$ 1,664$ 1,994$ 2,101$ 2,749$ 4,200$ 7,282
High Quality Valves Built to Last... www.flomatic.com
CONSTA
NT PRESSURE PUMP CONTROL
800.833.2040
3/4"1"1 1/4"*11/2"2"
3/4"1"1 1/4"*11/2"2"
• Slotted seat
• No drilled holes
• Self-cleaning
• No screen
SCREEN DRILLEDHOLE
FOR PRESSURE REDUCING VALVES SEE PG. 22 & 27!
26385 Flomatic pricelist 13_Danfoss Price List 4/16/13 2:11 PM Page 32
COMPACT PUMP PRESSURE- Reduces rapid pump cyclingand maintains a pre-set operating pressure for wells. Threadedfemale I.D.x male O.D. on inlet and outlet connections. Features aunleaded alloy body & cover, Nylon reinforced Buna-N diaphragm.1” NTP Female connection x 11/4" male NPT.
Temp Max: 180°F (80C) Pressure Max: 400 PSI
SIZE PART # SPRING RANGE LIST PRICE1” C3100E 35 - 65 PSI $ 253.051”* C3100EB* 35 - 65 PSI $ 262.50
PUMP CONTROL VALVE - Reduces rapid pump cycle withfield adjustable by-pass and maintains a pre-set operating downstream pressure. Ideal for irrigation, water wells and agriculture applications. Optional check feature.
Max. pressure differential 125 PSI. Consult factory for higher pressure differential.
29
BOOSTER-IT ®
C154 Discount Code A
CYCLE GARD® CICIN101 Discount Code A
BOOSTER-IT® WATER SYSTEM PUMP CONTROLVALVE- Designed for well water pumping systems, booster systems, and pump irrigation pumping systems. Valve body is cast from an unleaded bronze alloy with two 1/4" tapped holeson tank side for pressure switch and gauge. Temp Max: 180°F (80C) Pressure Max: 175 PSI
SIZE PART NO. WGT. CASE QTY. LIST PRICE
3/4" C154100 .7 100 $ 56.231" C154101 1.3 49 $ 77.7811/4" C154102 1.6 36 $ 107.5411/2" C154103 2.5 25 $ 119.992" C154104 3.1 16 $ 153.08
Note: BOOSTER-IT®requires a safety pressure release valve, not
available from Flomatic Valves.
PUMP CONTROL VALVE - Reduces rapid pump cycle andmaintains a pre-set operating downstream pressure.Ideal for irri-gation, water wells and agriculture. Built in by-pass at 5 GPM.
CYCLE GARD® CI2CIN101-2 Discount Code A
CYCLE GARD® CNA CNA101A Discount Code A
HYDROSTAT ®
MODEL C3100E Discount Code A
NEW!
FLANGED ANSI 150#CNA1010BCNA1010CCNA1010DCNA1010ECNA1010F
CNA1011CCNA1011DCNA1011ECNA1011FCNA1011GCNA1011JCNA1011KCNA1011LCNA1011M
$ 1,224$ 1,224$ 1,481$ 1,593$ 2,044
NPT VALVES RATED TO 250 PSI 125# FLANGED VALVES RATED TO 250 PSI
CIN1021FCIN1021GCIN1021JCIN1021K
3" 4" 6" 8"
Temp Max: 180°F (80C) Pressure Max: 250 PSIFactory set at 50 PSI
Temp Max: 180°F (80C) Pressure Max: 250 PSIFactory set at 50 PSI Temp Max: 180°F (80C) Pressure Max: 250 PSI
LIST PRICELIST PRICE
LIST PRICE
11/2"2"
NPT
11/2"2"
2"
CIN1020CCIN1020D
CIN1020C2CIN1020D2
CIN1020DG2
SIZESIZE
SIZE
PART#THREADED FEMALE
PART#NPT
GROOVEDPART#FLANGED 125#
$ 846.00$ 925.00
$ 770.00$ 855.00
$ 755.00$ 1,375.00$ 2,067.00$ 4,243.00$ 4,382.00
PUMP CONTROL VALVE-Reduces rapid pump cycle withfield adjustable by-pass and maintains a pre-set operating downstream pressure for wells. CONSULT FACTORY or controlvalve price list for specific options.
SIZEPART #
LIST PRICELIST PRICEPART #
11/4"11/2"2"21/2"3"4"6"8"10"12"
$ 1,454$ 1,615$ 1,994$ 2,101$ 2,749$ 4,043$ 7,070$ 9,661$15,893
THREADED FEMALE
Factory set at 60 PSIMax Flow 25 GPM
CONSTA
NT P
RESSURE PUMP CONTROL 8
00.833.2040
www.flomatic.com High Quality Valves Built to Last...
*With (2) 1/4” TappingsUNLEADED VALVES
CONSTANT PRESSURE PUMP CONTROL
Max. pressure differential 125 PSI. Consult factory for higher pressure differential
26385 Flomatic pricelist 13_Danfoss Price List 4/16/13 2:11 PM Page 33
30
MINIAIR®- Cast iron body-stainless steel trim. Threaded femalex female connections. NITRILE (Buna-N) seat. Small orifice.Consult bulletin # 280 for details. Vents under line pressure.
Temp Max: 150°F (65C) Inlet Pressure Max: 200 PSI
INLET OUTLET PART NO. WGT. LIST PRICE
3/8" 3/8" 6500 6 $ 147.261/2" 3/8" 6501 7 $ 159.233/4" 3/8" 6502 7 $ 181.721" 1/2 " 6503 27 $ 202.232" 1/2 " 6504 45 $ 598.003" 1/2 " 6505 45 $ 1,562.56
CONSULT FACTORY for full line of sizes available.Viton Seal standard.
MAXIAIR®- Cast iron body-stainless steel trim. Threadedfemale x female connections. NITRILE (Buna-N) seat. Largeorifice– equals inlet size. Vents on filling- eliminates vacuumunder pressure loss.
Temp Max: 150°F (65C) Inlet Pressure Max: 200 PSI
INLET OUTLET PART NO. WGT. LIST PRICE
1/2 " 1/2" 6520 7 $ 315.001" 1" 6521 16 $ 421.052" 2" 6522 42 $ 686.703" 3" 6523 92 $ 1,023.754" 4" 6524 154 $ 1,785.006" 6" 6525 174 $ 2,475.00
CONSULT FACTORY for full line of sizes available.
MAXIAIR® Discount Code B
WELLAIR®- Similar to Maxiair™ but features discharge throttling valve. Ideal for deep well applications.
Temp Max: 150°F (65C) Inlet Pressure Max: 200 PSI
INLET OUTLET PART NO. WGT. LIST PRICE
1/2" 1/2" 6560 12 $ 548.101" 1" 6561 22 $ 678.302" 2" 6562 55 $ 971.253" 3" 6563 100 $ 1,610.70
CONSULT FACTORY for full line of sizes available.
WELLAIR® Discount Code B COMBOAIR®- Cast iron body-stainless steel trim. Combinesfeatures of Miniair™ and Maxiair™ in one housing. Small orificeis 3/32” in the 1” valve, 3/16” in the 2” and 3” sizes.
Temp Max: 150°F (65C)Inlet Pressure Max: 1”– 150 PSI, 2”-3” – 250 PSI
INLET OUTLET PART NO. WGT. LIST PRICE
1" 1" 6540 30 $ 464.102" 2" 6541 75 $ 829.003" 3" 6542 115 $ 1,991.854" 4" 6543 163 $ 2,499.00
CONSULT FACTORY for full line of sizes available.
COMBOAIR® Discount Code B
MINIAIR® Discount Code B
High Quality Valves Built to Last... www.flomatic.com
AIR RELEASE
800.833.2040
6BSE BUG SCREEN - Picture shown with valve not included.Unleaded bronze body with threaded female connection. Stainlesssteel strainer with unleaded bronze. Stainless steel or plastic caps,with nipple for installation into air valve vent.
SIZE PART NO. WGT. LIST PRICE
1/2" 4399E-1 0.2 $ 18.061" 4301E-1 1.2 $ 20.372"* 4304E-1 * 2.8 $ 57.143" 4306E-1 7.7 $128.15
* End caps on strainer are plastic.
6BSE BUG SCREEN Discount Code B
All Air Release, Air & Vacuum and UniversalCombination Valves meet or exceed ANSI/AWWA
C512 standards.
26385 Flomatic pricelist 13_Danfoss Price List 4/16/13 2:11 PM Page 34
31
SEWAIR-MINI®- Cast iron body-stainless steel trim. Threadedfemale x female connections. NITRILE (Buna-N) seat. 1/4” orifice-for waste water application. Vents under line pressure.
Temp Max: 150°F (65C) Inlet Pressure Max: 175 PSIINLET OUTLET PART NO. WGT. LIST PRICE
2" 1/2" 6600 50 $ 587.003" 1/2" 6601 70 $ 930.30
CONSULT FACTORY for full line of sizes available.
SEWAIR-MAXI®- Cast iron body-stainless steel trim. Threadedfemale x female connections. NITRILE (Buna-N) seat. Large orifice–equals inlet size vents on filling. Eliminates vacuum inwaste water pipeline under pressure loss.
Temp Max: 150°F (65C) Inlet Pressure Max: 175 PSIINLET OUTLET PART NO. WGT. LIST PRICE
2" 1" 6620 50 $ 848.402" 2" 6621 82 $ 1,602.303" 3" 6622 85 $ 1,850.004" 4" 6623 120 $ 2,589.006" 6" 6624 210 $ 4,785.00
CONSULT FACTORY for full line of sizes available.
SEWAIR-DUAL®- Cast iron body, stainless steel trim. NITRILE(Buna-N) seat. Provides protection of both small and large orifices. Two body construction.
Temp Max: 150°F (65C) Inlet Pressure Max: 175 PSIINLET OUTLET PART NO. WGT. LIST PRICE
2" 1" 6640 120 $ 2,725.002" 2" 6641 150 $ 3,100.00
CONSULT FACTORY for full line of sizes available.
SEWAIR-DUAL® Discount Code B
SEWAIR-COMBO®- Cast iron body, stainless steel trim.NITRILE (Buna-N) seat. Provides same protection as Sewair-Dual®,but combines into one body.
Temp Max: 150°F (65C) Pressure Max: 175 PSIINLET OUTLET PART NO. WGT. LIST PRICE
2" 1" 6650 80 $ 1,556.422" 2" 6651 110 $ 2,332.263" 3" 6652 145 $ 3,344.36
CONSULT FACTORY for full line of sizes available.
SEWAIR-COMBO® Discount Code B
BACKFLUSH- Fabric reinforced NITRILE (Buna-N) hose withbronze shut off valves and galvanized quick disconnects. Designedfor pressure backflush Sewair models.
INLET PART NO. WGT. LIST PRICE2" BF2 12 $ 385.353" BF3 19 $ 605.85
CONSULT FACTORY for full line of sizes available.
BACKFLUSH Discount Code B
FEATURES/FEATURES/BENEFITSBENEFITS
•Automatic•Improves Flow & Pump
Efficiency•Eliminates Restrictive Air or Gas Pockets•Saves Energy
•Protects Against Vacuum•Long Body Protects Orifice
From Sewage
SEWAIR-MINI® Discount Code B SEWAIR-MAXI® Discount Code B
AIR RELEASE 8
00.833.2040
www.flomatic.com High Quality Valves Built to Last...
26385 Flomatic pricelist 13_Danfoss Price List 4/16/13 2:11 PM Page 35
32High Quality Valves Built to Last... www.flomatic.com
BACKFLO
W PREVENTERS 800.833.2040
HOSE CONNECTION VACUUM BREAKERS-Designed to prevent back-siphonage or backflow of water, withvandal resistant features. Not for potable water.
Temp Max: 180°F (80C) Pressure Max: 125 PSIComplies with ASSE 1011
SIZE PART NO. WGT. LIST PRICE 3/4" GF800 .21 $ 8.78
UNLEADED DUAL CHECK VALVE- Brass body with singleunion.Temp Max: 180°F (80C) Pressure Max: 175 PSIComplies with ASSE 1024
SIZE PART NO. WGT. LIST PRICE 1/2" GF8089E 2 $ 60.633/4" GF8080E 2 $ 67.041" GF8081E 2 $ 73.19
Add “FC” to end of part number for copper sweat connection.Note: Consult factory for additional connection configurations.
DUAL CHECK with ATMOSPHERIC VENT Continuouspressure backflow preventer with an intermediate atmosphericvent, with double union ends. Complies with ASSE 1012, not forpotable water.Temp Max: 210°F (98C) Pressure Max: 175 PSI
SIZE PART NO. WGT. LIST PRICE 1/2" GF8289 1.3 $ 78.623/4" GF8280 1.3 $ 78.90
*With copper sweat connectionsNote: Consult factory for additional connection configurations.
GFAVB Discount Code C GFHB8 Discount Code CGF8080E Discount Code C
GF8200 Discount Code C
ATMOSPHERIC VACUUM BREAKER- Designed to preventback-siphonage. Not for potable water.
Temp Max: 180°F (80C) Pressure Max: 125 PSIComplies with ASSE 1001
SIZE PART NO. WGT. LIST PRICE1/2 " GF3599 1 $ 40.963/4 " GF3500 2 $ 45.461” GF3501 2 $ 59.1211/4” GF3502 3 $ 132.6711/2” GF3503 4 $ 153.912” GF3504 6 $ 244.18
DUAL CHECK VALVE- 316 stainless steel body with singleunion.Temp Max: 180°F (80C) Pressure Max: 175 PSIComplies with ASSE 1024
SIZE PART NO. WGT. LIST PRICE 3/4" GF8080S6 2 $ 127.001" GF8081S6 2 $ 132.23
GF8080S6 Discount Code C
NEW!Introducing Glen-Flo™ Backflow Products.
Glen-Flo™ products provide uncompromising reliability, protecting potable water lines from hazardous
cross connections
TEST KIT TK1 Discount Code C
TEST KIT #1- This backflow prevention assembly test kit is designed for field testing of all brands of reduced pressure principle, double check and pressure vacuum breakers.• Test kit with five control valves• Accuracy: +/- .2 P.S.I.D. (descending)• Dial size: 4 1/2" round, 0 - 15 P.S.I.D. (descending)• Maximum working pressure: 200 PSI
PART NO. WGT. LIST PRICE
B9907 8 $2,215.53
32
26385 Flomatic pricelist 13_Danfoss Price List 4/16/13 2:11 PM Page 36
FLANGED- Resilient wedge gate valves which meet revision ofAWWA C509 standard with bronze stem. ANSI B16.1, class 125Temp Max: 140°F (60C) Pressure Max: 200 PSI
Tapped & plugged
SIZE PART NO. WGT. LIST PRICE 21/2" 8461 51 $ 643.963" 8462 67 $ 755.014" 8463 88 $ 835.396" 8464 138 $ 1,129.808" 8465 214 $ 1,738.8010" 8466 360 $ 2,485.3512" 8467 531 $ 3,001.95
OUTSIDE SCREW & YOKE- Resilient wedge gate valveswhich meet revision of AWWA C509 standard with bronze stemand are UL/FM listed. ANSI B16.1, class 125Temp Max: 140°F (60C) Pressure Max: 200 PSI
Tapped & plugged
SIZE PART NO. WGT. LIST PRICE 21/2" 84610SY 55 $ 1,059.453" 84620SY 74 $ 1,193.854" 84630SY 103 $ 1,290.456" 84640SY 158 $ 2,023.358" 84650SY 240 $ 3,204.6010" 84660SY 392 $ 4,369.05
33
FLANGED- Resilient wedge gate valves which meet revision ofAWWA C515 standard, with stainless steel stem. ANSI B16.1, class 125Temp Max: 140°F (60C) Pressure Max: 250 PSI Tapped & plugged
SIZE PART NO. WGT. LIST PRICE 21/2" 8561 38 $ 261.993" 8562 56 $ 318.044" 8563 78 $ 425.806" 8564 138 $ 701.008" 8565 214 $ 1,158.5910" 8566 360 $ 1,694.7012" 8567 531 $ 2,406.6014" 8568 547 $ 4,844.7016" 8569 719 $ 5,914.65
115FL Discount Code C
PUSH-ON- Resilient wedge gate valves which meet revision of AWWAC515 standard, with stainless steel stem. Ring-type (push-on flange)
Temp Max: 140°F (60C) Pressure Max: 250 PSI Tapped & plugged
SIZE PART NO. WGT. LIST PRICE 2" 8560RT 28 $ 233.5121/2" 8561RT 42 $ 261.063" 8562RT 44 $ 314.154" 8563RT 69 $ 408.606" 8564RT 119 $ 686.928" 8565RT 203 $ 1,205.4010" 8566RT 278 $ 2,085.3012" 8567RT 421 $ 3,129.00
115PO Discount Code C
MECHANICAL JOINT- Resilient wedge gate valves which meetrevision of AWWA C515 standard, with stainless steel stem. ANSI B16.1, class 125
Temp Max: 140°F (60C) Pressure Max: 250 PSI Tapped & plugged
SIZE PART NO. WGT. LIST PRICE 3" 8562MJ 44 $ 411.844" 8563MJ 69 $ 525.756" 8564MJ 119 $ 937.598" 8565MJ 203 $ 1,516.2010" 8566MJ 278 $ 1,954.0512" 8567MJ 421 $ 3,074.40
115MJ Discount Code C
GROOVED GATE VALVE- Resilient wedge gate valves withGrooved x Grooved connections, bronze stem, grooved ends conformsto ANSI/AWWA C606 and flanged ends conform to ANSI/ASME B16,class 125, these valves also conform to ANSI/AWWA C550.
Temp Max: 140°F (60C) Pressure Max: 250 PSI
SIZE PART NO. WGT. LIST PRICE 21/2" 8461G 43 $ 501.793" 8462G 57 $ 582.504" 8463G 63 $ 644.516" 8464G 92 $ 924.27
FLANGE GROOVED GATE VALVE-Resilient wedge gate valveswith Grooved x Flange connections, bronze stem, grooved end conformsto ANSI/AWWA C606 and flanged ends conform to ANSI/ASME B16,class 125, these valves also conform to ANSI/AWWA C550.
Temp Max: 140°F (60C) Pressure Max: 250 PSI
Tapped & plugged
SIZE PART NO. WGT. LIST PRICE 21/2" 8461FG 47 $ 501.793" 8462FG 52 $ 582.504" 8463FG 70 $ 644.516" 8464FG 106 $ 924.21
109FG Discount Code C
109OSY Discount Code C 109NRS Discount Code C 109G Discount Code C
AWWA C515 Gate Valves
AWWA C509 Gate ValvesStandard 2” operating nut, for hand wheel on all C515 Gate Valves. Add “HW” to the end of the part number and add 15 % to list.
GA
TE V
ALV
ES 8
00.8
33.2
040
www.flomatic.com
FLOMATIC FREIGHT POLICYFLOMATIC FREIGHT POLICYWe offer fast delivery
• “A” & “C” Code items: $1,500.00 net prepaid
• “B” Code items: FOB Factory
Minimum net Order of $75.00
All gate valves standard open left. Consult factory for right hand opening.
26385 Flomatic pricelist 13_Danfoss Price List 4/16/13 2:16 PM Page 37
34
FOR LISTING OF WORLDWIDE FLOMATIC DISTRIBUTION,VISIT OUR WEBPAGE: www.flomatic.com
High Quality Valves Built to Last... www.flomatic.com
SALES REPS BY STATE
800.833.2040
U.S. SALES REPS BY STATEU.S. SALES REPS BY STATEMUNICIPALH2O Reps 770-295-9736 • FAX 770-982-3719
Pacific NW Sales 503-698-1025 • FAX 503-698-2351
Desert Pacific Mktg 623-322-7902 • FAX 623-322-7903
Mc Intire Management 816-588-8700 • FAX 816-746-8264
Desert Pacific Mktg 559-779-4651 • FAX 866-590-6068
O’Connor Sales 562-403-3848 • FAX 562-303-3858
Maples Sales 303-371-1800 • FAX 303-371-1808
Harmon & Co 207-998-8100 • FAX 207-998-2484
Hasco Sales 800-762-7838 • FAX 888-962-7838
Hasco Sales 800-762-7838 • FAX 888-962-7838
L.J. Ruffin 407-291-2341 • FAX 407-291-2345
H2O Reps 770-295-9736 • FAX 770-982-3719
Hawaii Eng. Ser. 808-262-7773 • FAX 808-262-7768
Pacific NW Sales 503-698-1025 • FAX 503-698-2351
Flomatic 800-833-2040 • FAX 518-761-9798
Flo-Systems (South) 618-667-7890 • FAX 618-667-7976
Watermark Engineered 317-219-4333 • FAX 317-219-3370
McIntire Management 816-746-6669 • FAX 816-746-8264
McIntire Management 816-746-6669 • FAX 816-746-8264
Watermark Engineered 317-219-4333 • FAX 317-219-3370
WSI Corp 225-753-0484 • FAX 225-753-0483
Harmon & Co 207-998-8100 • FAX 207-998-2484
Hasco Sales 800-762-7838 • FAX 888-962-7838
Harmon & Co 207-998-8100 • FAX 207-998-2484
Flomatic 800-833-2040 • FAX 518-761-9798
Flomatic 800-833-2040 • FAX 518-761-9798
Flomatic 800-833-2040 • FAX 518-761-9798
WSI Corp 225-753-0484 • FAX 225-753-0483
Flo-Systems 618-667-7890 • FAX 618-667-7976
Mc Intire Management 816-588-8700 • FAX 816-746-8264
Pacific NW Sales 503-698-1025 • FAX 503-698-2351
Mc Intire Management 816-588-8700 • FAX 816-746-8264
Desert Pacific 623-322-7902 • FAX 623-322-7903
Harmon & Co 207-998-8100 • FAX 207-998-2484
Hasco Sales 800-762-7838 • FAX 888-962-7838
Maple Sales 303-371-1800 • FAX 303-371-1808
Group One 585-655-2339 • FAX 585-655-2558
Advanced Hydronics 631-532-2700 • FAX 631-532-2701
Lewis Marketing 704-376-0262 • FAX 704-375-1850
Flomatic 800-833-2040 • FAX 518-761-9798
Wynn Enterprises 814-847-2386 • FAX 814-847-2393
Mc Intire Management 816-588-8700 • FAX 816-746-8264
Pacific NW Sales 503-698-1025 • FAX 503-698-2351
Hasco Sales 800-762-7838 • FAX 888-962-7838
Wynn Enterprises 814-847-2386 • FAX 814-847-2393
Harmon & Co 207-998-8100 • FAX 207-998-2484
Lewis Marketing 704-376-0262 • FAX 704-375-1850
Flomatic 800-833-2040 • FAX 518-761-9798
Lewis Marketing 704-376-0262 • FAX 704-375-1850
TLP Solutions 817-481-8774
Todd Housley 208-705-1113
Harmon & Co 207-998-8100 • FAX 207-998-2484
Hasco Sales 800-762-7838 • FAX 888-962-7838
Pacific NW Sales 503-698-1025 • FAX 503-698-2351
Wynn Enterprises 814-847-2386 • FAX 814-847-2393
Flomatic 800-833-2040 • FAX 518-761-9798
Maples Sales 303-371-1800 • FAX 303-371-1808
INDUSTRIALH2O Reps 770-295-9736 • FAX 770-982-3719
Pacific NW Sales 503-698-1025 • FAX 503-698-2351
Desert Pacific Mktg 623-322-7902 • FAX 623-322-7903
Mc Intire Management 816-588-8700 • FAX 816-746-8264
Desert Pacific Mktg 559-779-4651 • FAX 866-590-6068
O’Connor Sales 562-403-3848 • FAX 562-303-3858
Maples Sales 303-371-1800 • FAX 303-371-1808
Harmon & Co 207-998-8100 • FAX 207-998-2484
Hasco Sales 800-762-7838 • FAX 888-962-7838
Hasco Sales 800-762-7838 • FAX 888-962-7838
L.J. Ruffin 407-291-2341 • FAX 407-291-2345
H2O Reps 770-295-9736 • FAX 770-982-3719
Hawaii Eng. Ser. 808-262-7773 • FAX 808-262-7768
Pacific NW Sales 503-698-1025 • FAX 503-698-2351
Flomatic 800-833-2040 • FAX 518-761-9798
Rep Rite Burk 651-686-0181 • FAX 651-686-0803
Top Marketing 317-575-92 • FAX 317-575-98431
Schnase Sales 402-462-5889 • FAX 402-462-5969
Schnase Sales 402-462-5889 • FAX 402-462-5969
Top Marketing 317-575-92 • FAX 317-575-98431
WSI Corp 225-753-0484 • FAX 225-753-0483
Harmon & Co 207-998-8100 • FAX 207-998-2484
Hasco Sales 800-762-7838 • FAX 888-962-7838
Harmon & Co 207-998-8100 • FAX 207-998-2484
R.S. Controls 269-375-2525 • FAX 269-375-2568
Flomatic 800-833-2040 • FAX 518-761-9798
Rep Rite Burk 651-686-0181 • FAX 651-686-0803
WSI Corp 225-753-0484 • FAX 225-753-0483
Flomatic 800-833-2040 • FAX 518-761-9798
Schnase Sales 402-462-5889 • FAX 402-462-5969
Pacific NW Sales 503-698-1025 • FAX 503-698-2351
Schnase Sales 402-462-5889 • FAX 402-462-5969
Desert Pacific 623-322-7902 • FAX 623-322-7903
Harmon & Co 207-998-8100 • FAX 207-998-2484
Hasco Sales 800-762-7838 • FAX 888-962-7838
Maple Sales 303-371-1800 • FAX 303-371-1808
Group One 585-655-2339 • FAX 585-655-2558
Advanced Hydronics 631-532-2700 • FAX 631-532-2701
Lewis Marketing 704-376-0262 • FAX 704-375-1850
Rep Rite Burk 651-686-0181 • FAX 651-686-0803
Wynn Enterprises 814-847-2386 • FAX 814-847-2393
Mc Intire Management 816-588-8700 • FAX 816-746-8264
Pacific NW Sales 503-698-1025 • FAX 503-698-2351
Hasco Sales 800-762-7838 • FAX 888-962-7838
Wynn Enterprises 814-847-2386 • FAX 814-847-2393
Harmon & Co 207-998-8100 • FAX 207-998-2484
Lewis Marketing 704-376-0262 • FAX 704-375-1850
Rep Rite Burk 651-686-0181 • FAX 651-686-0803
Lewis Marketing 704-376-0262 • FAX 704-375-1850
DJC Sales 972-790-0160 • FAX 972-790-9210
Todd Housley 208-705-1113
Harmon & Co 207-998-8100 • FAX 207-998-2484
Hasco Sales 800-762-7838 • FAX 888-962-7838
Pacific NW Sales 503-698-1025 • FAX 503-698-2351
Wynn Enterprises 814-847-2386 • FAX 814-847-2393
Rep Rite Burk 651-686-0181 • FAX 651-686-0803
Maples Sales 303-371-1800 • FAX 303-371-1808
STATEALABAMA
ALASKA
ARIZONA
ARKANSAS
CALIFORNIA
SOUTHERN CALIFORNIA
COLORADO
CONNECTICUT
DELAWARE
D.C.
FLORIDA
GEORGIA
HAWAII
IDAHO
ILLINOIS -NORTH
-SOUTH Rep Rite Burk 651-686-0181 • FAX 651-686-0803
INDIANA
IOWA
KANSAS
KENTUCKY
LOUISIANA
MAINE
MARYLAND
MASSACHUSETTS
MICHIGAN
UPPER PENINSULA
MINNESOTA
MISSISSIPPI
MISSOURI -EAST
-WEST
MONTANA
NEBRASKA
NEVADA
NEW HAMPSHIRE
NEW JERSEY -SOUTH
NEW MEXICO
NEW YORK -UPSTATE
NORTH NEW JERSEY & NYC
NORTH CAROLINA
NORTH DAKOTA
OHIO
OKLAHOMA
OREGON
PENNSYLVANIA -EAST
-WEST
RHODE ISLAND
SOUTH CAROLINA
SOUTH DAKOTA
TENNESSEE
TEXAS
UTAH
VERMONT
VIRGINIA
WASHINGTON
WEST VIRGINIA
WISCONSIN
WYOMING
DOMESTIC WATER SYSTEMSH2O Reps 770-295-9736 • FAX 770-982-3719
Pacific NW Sales 503-698-1025 • FAX 503-698-2351
Desert Pacific Mktg 623-322-7902 • FAX 623-322-7903
DJC Sales 972-790-0160 • FAX 972-790-9210
Desert Pacific Mktg 559-779-4651 • FAX 866-590-6068
Flomatic 800-833-2040 • FAX 518-761-9798
Maples Sales 303-371-1800 • FAX 303-371-1808
Harmon & Co 207-998-8100 • FAX 207-998-2484
Hasco Sales 800-762-7838 • FAX 888-962-7838
Hasco Sales 800-762-7838 • FAX 888-962-7838
Welty Inc 813-310-9508 • FAX 813-948-82098
H2O Reps 770-295-9736 • FAX 770-982-3719
Hawaii Eng. Ser. 808-262-7773 • FAX 808-262-7768
Pacific NW Sales 503-698-1025 • FAX 503-698-2351
Rep Rite Burk 651-686-0181 • FAX 651-686-0803
Top Marketing 317-575-92 • FAX 317-575-98431
Schnase Sales 402-462-5889 • FAX 402-462-5969
Schnase Sales 402-462-5889 • FAX 402-462-5969
Top Marketing 317-575-92 • FAX 317-575-98431
WSI Corp 225-753-0484 • FAX 225-753-0483
Harmon & Co 207-998-8100 • FAX 207-998-2484
Hasco Sales 800-762-7838 • FAX 888-962-7838
Harmon & Co 207-998-8100 • FAX 207-998-2484
Herder Sales 269-342-0090 • FAX 269-385-2999
Rep Rite Burk 651-686-0181 • FAX 651-686-0803
Rep Rite Burk 651-686-0181 • FAX 651-686-0803
WSI Corp 225-753-0484 • FAX 225-753-0483
Flomatic 800-833-2040 • FAX 518-761-9798
Schnase Sales 402-462-5889 • FAX 402-462-5969
Pacific NW Sales 503-698-1025 • FAX 503-698-2351
Schnase Sales 402-462-5889 • FAX 402-462-5969
Desert Pacific 623-322-7902 • FAX 623-322-7903
Harmon & Co 207-998-8100 • FAX 207-998-2484
Hasco Sales 800-762-7838 • FAX 888-962-7838
Maple Sales 303-371-1800 • FAX 303-371-1808
Group One 585-655-2339 • FAX 585-655-2558
Advanced Hydronics 631-532-2700 • FAX 631-532-2701
Lewis Marketing 704-376-0262 • FAX 704-375-1850
Rep Rite Burk 651-686-0181 • FAX 651-686-0803
Wynn Enterprises 814-847-2386 • FAX 814-847-2393
DJC Sales 972-790-0160 • FAX 972-790-9210
Pacific NW Sales 503-698-1025 • FAX 503-698-2351
Hasco Sales 800-762-7838 • FAX 888-962-7838
Wynn Enterprises 814-847-2386 • FAX 814-847-2393
Harmon & Co 207-998-8100 • FAX 207-998-2484
Lewis Marketing 704-376-0262 • FAX 704-375-1850
Rep Rite Burk 651-686-0181 • FAX 651-686-0803
Lewis Marketing 704-376-0262 • FAX 704-375-1850
DJC Sales 972-790-0160 • FAX 972-790-9210
Todd Housley 208-705-1113
Harmon & Co 207-998-8100 • FAX 207-998-2484
Hasco Sales 800-762-7838 • FAX 888-962-7838
Pacific NW Sales 503-698-1025 • FAX 503-698-2351
Wynn Enterprises 814-847-2386 • FAX 814-847-2393• FAX
Rep Rite Burk 651-686-0181 • FAX 651-686-0803
Maples Sales 303-371-1800 • FAX 303-371-1808
26385 Flomatic pricelist 13_Danfoss Price List 4/16/13 2:11 PM Page 38
1. SALES & ORDER DESK 800-833-2040 Ext. 2 We love to help with new orders and inquiries.
2. TECH SUPPORT 800-833-2040 Ext. 4 Our engineers are on stand-by for application/product support.
3. MARKETING DEPT. 518-761-9797 Ext. 3 Use this line & ext. 3 to reach the sales & marketing group.
4. FAX ORDERS 800-314-3155 The fastest and easiest way is to fax us orders and inquiries.
518-761-9798
5. PHONE 518-761-9797 If you are out of the country or can’t get through, try this line.
6. WEB SITE www.flomatic.com This page will help you get the latest information on Flomatic.
7. E-MAIL ORDERS [email protected] This is a quick and easy way to send us a message and communicate with us.
8. U.S. Mail 15 Pruyn’s Island Drive Put it in an envelope and lick a stamp, it’s that easy.
Glens Falls, NY 12801-4424
www.flomatic.com High Quality Valves Built to Last...
Flomatic Conditions of SaleTERMS OF SALEPRICEPrices at date of shipment will apply. Prices are subject to change without notice.ACCEPTANCEOrders are accepted subject to approval of credit. Delivery is subject to strikes,accidents, or other causes beyond our control.ERRORS, SHORTAGES, ETC.All claims for errors, shortages, etc. must be made within 10 days of delivery.CANCELLATIONS OF ORDERSOrders for standard catalog products may be cancelled only if notice is receivedprior to the date of shipment.RETURNSMerchandise in new and saleable condition may be returned within one year afterpurchase on a freight prepaid basis for credit upon return authorization approvalnumber, subject to inspection and acceptance at our plant. A 25% restockingcharge and original freight allowance, if any, will be deducted from the credit.Special order products are nonreturnable, or at manufacturer’s option.MINIMUM NET ORDER TERMS FREIGHT$75.00 1% ten days, net 30 A&C Code $1500
B Code F.O.B FactoryWARRANTIESLIMITED ONE-YEAR WARRANTY (Complete Product Line)Flomatic Corporation warrants that its products are free from defects in materialsand workmanship. Flomatic will replace any valve covered by this warranty that isfound to be defective within one year, unless otherwise stated below, from the timeof sale. This warranty will be void if the product has been modified in any way bythe purchaser, or is subjected to unreasonable use.LIMITED 5-YEAR WARRANTY (Enviro-Check® and Enviro Foot Valves)Flomatic warrants that its ENVIRO-CHECK® AND FOOT VALVES, in all sizes up to 4”,are free from defects in materials and workmanship. Flomatic will replace, uponreturn authorization approval number, any ENVIRO-CHECK® OR ENVIRO FOOT VALVEcovered by this warranty that is found to be defective within five years from the
time of sale. This warranty will be void if the product has been modified inany way by the purchaser, or is subjected to unreasonable use. These limitedwarranties extend to the original purchase from Flomatic only; they do not extendto any other purchaser or transferee.EXCLUSION OF WARRANTIESFlomatic makes no warranties, expressed or implied, with respect to its valves,other than the expressed limited warranties described herein. The implied war-ranties of merchantability and fitness for a particular purpose are hereby dis-claimed by Flomatic . There are no warranties that extend beyond the descriptionon the face hereof.WARNING-NOT DESIGNED, INTENDED OR PERMITTED IN NUCLEARFACILITY APPLICATIONS. FLOMATIC VALVES ARE NOT DESIGNED OR ENGINEERED FOR USE IN ANY NUCLEAR FACILITY OR IN CONJUNCTION WITH ANY NUCLEAR FACILITY OR SUPPORT FACILITY.USE OF ANY OF FLOMATIC’S PRODUCTS IN ANY SUCH APPLICATIONIS A MISUSE OF THESE PRODUCTS AND VOIDS ALL WARRANTIESCONTAINED HEREIN, EXPRESSED AND IMPLIED, OF MERCHANTABILITYAND FITNESS FOR PARTICULAR PURPOSE.EXCLUSION OF INCIDENTAL AND CONSEQUENTIAL DAMAGESIn no event shall Flomatic be liable for incidental or consequential damages,including but without limitation, damages of personal injuries resulting from thenegligence of Flomatic, which may arise from the manufacture, sale, purchase and/or use of Flomatic valves. It being intended that purchaser’s exclusive remedy islimited to replacement of defective products. Some states do not allow the exclusionor limitation of incidental or consequential damages, or limitation on how long animplied warranty lasts, so that the above limitations may not apply to you. Contactyour distributor or Flomatic at address shown if you have any questions about thecoverage of this warranty or service under this warranty. This warranty gives youspecific legal rights, and you may have other rights which vary from state to state.
NOTE: Flomatic reserves the right the change and/or alter valve products without prior notice. Consult factory for valve specifications.
88 WAYS YOU CAN REACH US...WAYS YOU CAN REACH US...CONDITIO
NS O
F SALE
800.833.2040
26385 Flomatic pricelist 13_Danfoss Price List 4/16/13 2:11 PM Page 39
Your global partner with innovative solutions.
Flomatic can accept no responsibility for possible errors in catalogues, brochures and other printed material. Flomatic reserves the right to alter its products without notice. Thisalso applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed. All trademarks in this material are property of the respective companies.
15 Pruyn’s Island DriveGlens Falls, N.Y. 12801-4424800-833-2040518-761-9797 • Fax 518-761-9798www.flomatic.com e-mail: [email protected]
Distribution By:
This book is covered under patent numbers 6,024,121/6,581,633/5,176,171/4,971,093/7,128,088Ward valve patent #4,757,974 and #4,849,041
© 2013 Flomatic Corporation YPRICE13 10M
Your global partner with innovative solutions.
When you purchase Flomatic products, you are not only
investing in reliability, you are also joining a partnership for
tomorrow’s solutions. Flomatic is known for its precise
mechanical and electronic components and for its High
Quality Products. Our R & D and product development
begins with you.
ManufacturingPlant in Upstate
New York
26385 Flomatic pricelist 13_Danfoss Price List 4/16/13 2:11 PM Page 40