Download - LED Technology Earthcare
EarthcareTM LED T8Direct Replacement Technology
Lowering Energy & Lowering Costof LED Retro�tting
LED LightingLED Lighting Advantages
EFFICIENCY
DURABILITY
PERFORMANCE
ENERGY & COST
ENVIRONMENT & HEALTH
Energy savings from LEDs in 2012 was about
71 tBtu, equivalent to anannual energy cost
savings of about $675 million1
LED lighting on average saves more than 40% of
lighting utility costs2
40%$675M
EarthcareTM technology reduces average
project cost by 50%, reducing Payback
to less than 2 years or less
2 yrs
ENERGY & COST
Less Energy Consumption Fast payback rate
LEDs are used EverywhereStreet lights to traffic signals, sinage, displays, automobile lighting systems.
LEDs Plastic Construction More durable and less prone to shattering compared to glass fluorescent tubes.
Lower Maintanence Costs
Longer Life Span 50,000 HRS = 6 years when used 24/7
Minimum Heat Generation Lower cooling costs
EFFICIENCYDU
RABI
LITY
Air quality, acoustics, levels of thermal comfort and levels of daylight affect the stress levels, health and well-being of occupants.
Lighting systems have tremendous impact on employees & staff.
LEDs have a natural feel and over superior performance over all conventional illumination devices.
THERMAL COMFORTLEVELS OF
IN SCHOOLSOF OCCUPANTS
AFFECT THE STRESS LEVELS, DAYLIGHT
HEALTH AND WELL-BEING
AIR QUALITY
ACOUSTICS
3
PERF
ORM
ANCE
No Mercury Vapor
No UV Exposure
No Flickering
A broken fluorescent may leak up to 100 times the federal limit for mercurychronic exposure
UV exposure from sitting under flouorescent light for 8+ hours equals one minute of sun exposure.
Light flickering has been associate with headaches, eye strain & general eye discomfort.
ENVI
RONM
ENT
& HE
ATH
In order to replace existing fluorescent lamps with LED lamps, it is necessary to change lamp fixtures, modify the ballast, or to additionally install a power supply exclusive for LED lamps.
Extra COST of LABOR ($29.79 ave. cost per troffer)Extra COST of new fixtures and partsExtra TIME of installation time (30mins ave. time per troffer)
Hazardous When somone unwittingly replaces LED tube with a fluorescent tube
LED Lighting Challenges
About Kumho Electric
Kumho Electric, established in 1935, is a subsidiary company of Kumho Asiana Group, which includes subsidiaries in automotive, industry, leisure, logistic, chemical and airline fields.
Kumho Electric Inc. has a 78 year history as an electrical engineering and component manufacturer started by president Myung-Gu Park, who also invented the electronic ballast in 1979, acquiring the world’s first patent of itskind.
Kumho Electric Inc. has established businesses worldwide, especially in Japan where Kumho Electric Inc. controls40% of the LED tube market.
Kumho Electric subsidiary and affiliate companies Kumho Changshu Kumho Electric VINA, Vietnam
Kumho Shenzen Kumho Electric, USA Kumho Shanhai Kumho Electric, Japan
Kumho Dongguan Lumimicro Kumho Changshu THLEDS
Earthcare™ Direct Replacement LED T8U.S. patented technology that allows “Direct replacement” of existing fluorescent lamp with electronic ballasts and easy installation in two minutes or less.
Extra LaborBallast workRewiring
Extra part or fixtures
Extra installation time Patent acquisition U.S. of circuit technology
5 Year warranty
LED Lighting Products
NO
NO
NO
Works with existing fixtures and electronic instant start ballasts.
Product Safety and Quality Certifications
UL is a global independent safety science company, not-for-profit product safety testing and certification organization. UL has been testing products for public safety for more than a century.
The ETL Listed Mark from Intertek is the fastest growing product certification mark in North America with more than 80,000 product listings.The ETL Listed Mark is proof of product compliance (electrical, gas and other safety standards) to North American safety standards.
DLC serves efficiency programs and the lighting industry by maintaining the leading public list of high quality, high efficiency LED products for the commercial sectors.
Earthcare™ Direct Replacement LED T8
LED Lighting Products
Earthcare™ Direct Replacement LED T8
LED Lighting Products
Payback of 2 years or less!
Rebates upto
50% of project cost$60 per LED lamp *varies by each rebate program and state.
3 Foot 2 Foot18W 22W 14W 9W
Ballast Factor (existing)
BF N(88%) N(88%) N(88%) N(88%)
PowerConsumption
P 18 22 14 9 W
Luminous Flux F 1,900 2,200 1540 990 lmLuminousEfficacy*
105 100 110 110 lm/W
Input-Voltage Vin VPower-Factor PF
ColorTemperature
CCT Kelvin
Rated Life Lt RaColor Rendering
IndexCRI Hrs
OperatingTemperature
Temp. °C
Diameter mmTotal Length mm
MaterialWeight g
AL,PC500
Classification Symbol Units4 Foot
110-277v (to IS ballast)0.9
3500/4100/5000 (other options available)
50,000
80+ Ra (90+ available special order)
-20 ~ 45
ф251,198
References
1 Navigant, Energy Savings Potential of Solid-State Lighting in General Illumina-tion Applications, January 2012, http://apps1.eere.energy.gov/buildings/publica-tions/pdfs/ssl/ssl_energy-savings-report_jan-2012.pdf
2 Adoption of Light-Emitting Diodes in Common Lighting Applications, April 2013, http://apps1.eere.energy.gov/buildings/publica-tions/pdfs/ssl/led-adoption-report_2013.pdf
3. Baker, L. & Berstein, H. (2012). The Impact of School Buildings on Student Health and Performance. [e-book] Available through: http://centerforgreen-schools.org/studies/k12.aspx [Accessed: 22 Dec 2013].