![Page 1: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/1.jpg)
Lathe-milling machiningLathe-milling machining
Contents
![Page 2: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/2.jpg)
Geometry modelGeometry model
In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry environment.
Workpiece contour
3D model of the part
Forlder containing geometry of impoerted 3D model
Folder containing workpiece contour named after the coordinate system it was created in
Contents
![Page 3: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/3.jpg)
Machine parameters Machine parameters
Start the Machine parameters dialog
Machine parameters dialog
List of available machines
Desired machine
Select the MaxTurn65 machine.
Contents
![Page 4: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/4.jpg)
MachineMachine
MaxTurn 65 machine
Part
MaxTurn 65 machine
Contents
![Page 5: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/5.jpg)
The PartThe Part
SprutCAM automatically assigns the imported model as the Part for machining.
Imported part model
Contents
![Page 6: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/6.jpg)
The WorkpieceThe Workpiece
The workpiece is created as the solid of rotation of the workpiece contour.
Workpiece contour
2D Geometry code defining the workpiece contour curve
2D Geometry mode
Workpiece - Solid of rotation of the workpiece contour
Workpiece contour curve
Machining mode
Workpiece tab
Contents
![Page 7: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/7.jpg)
Create operationCreate operation
The first operation is the Lathe Facing.
Create operation menu
Roughing operations group
Lathe Facing operation
New operation
Contents
![Page 8: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/8.jpg)
Select tool holderSelect tool holder
Tool holder
List of available toolhoders
Tool
Machine setup tab
Contents
![Page 9: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/9.jpg)
Operation parametersOperation parameters
Contents
![Page 10: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/10.jpg)
ToolpathToolpath
Calculate toolpath
Toolpath
Toolpath calculation is successful
Contents
![Page 11: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/11.jpg)
Machining simulationMachining simulation
Workpiece
Machining simulation result
Contents
![Page 12: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/12.jpg)
Create operationCreate operation
The next opeartion - Lathe Roughing. We use Fill parameters option to pass parameters of the previous operation.
Create operation menu
Roughing operations group
Lathe Facing operation
Fill parameters option passes parameters from the previous operation into the new one
New operation
Contents
![Page 13: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/13.jpg)
Job assignmentJob assignment
Job assignment
Job assignment
Select method of assigning machining job
Method – between two points
Job assignment – an area of the contour of the rotation solid of the part
Contents
![Page 14: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/14.jpg)
Job assignment and parametersJob assignment and parameters
We used the Fill parameters option to create the new operation so all parameters (job assignment and machining parameters) were copied from the previous operation
Toolholder
Tool
Part
Workpiece
Contents
![Page 15: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/15.jpg)
Toolpath calculationToolpath calculation
Run toolpath calculation
Toolpath
Calculation successful
Contents
![Page 16: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/16.jpg)
Machining simulation Machining simulation
Machining result of the previous operation
Simulation result
Contents
![Page 17: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/17.jpg)
Create operationCreate operation
Create operation menu
Roughing operations group
Lathe Finishing operation
New operation
Contents
![Page 18: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/18.jpg)
Select toolholderSelect toolholder
Toolholder
List of toolholders
Tool
Contents
![Page 19: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/19.jpg)
Job assignmentJob assignment
Job assignment contour curve
Job assignment tab
Job assignment method
Method – between two points
Job assignment – an area of the part contour
Contents
![Page 20: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/20.jpg)
Machining parametersMachining parameters
Contents
![Page 21: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/21.jpg)
ToolpathToolpath
Calculate toolpath
Toolpath
Calculation successful Toolpath
Contents
![Page 22: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/22.jpg)
Machining simulationMachining simulation
Result of previous opearions machining
Machining result
Contents
![Page 23: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/23.jpg)
Create operationCreate operation
Create operation menu
Roughing operations group
Lathe Drilling operation
New operation
Contents
![Page 24: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/24.jpg)
Job assignmentJob assignment
Lathe Drilling operation’s job assihment is the automatically defined hole of the 3D model whose axis coincides with the spindle rotation axis
Job assignment contour curve
Job assignment tab
Job assignment – an area of the part’s contour
Contents
![Page 25: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/25.jpg)
Toolholder selectionToolholder selection
Toolholder
List of toolholdersTool
Contents
![Page 26: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/26.jpg)
Machining parametersMachining parameters
Contents
![Page 27: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/27.jpg)
ToolpathToolpath
Compute the toolpath
Toolpath
Contents
![Page 28: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/28.jpg)
Machining simulationMachining simulation
Machining result of previous operations
Machining result
Contents
![Page 29: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/29.jpg)
Create operationCreate operation
Create operation menu
Finishing operations group
2D contouring operation
New operation
Contents
![Page 30: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/30.jpg)
Job assignmentJob assignment
Octahedrons edge
Job assignment tab
Octahedrons edge
Surfaces defining top and bottom machining levels
Surfaces specifying top and bottom levels of machining
Job assignment
Contents
![Page 31: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/31.jpg)
Select toolholderSelect toolholder
Toolholder
List of toolholdersTool
Contents
![Page 32: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/32.jpg)
Machining parametersMachining parameters
Contents
![Page 33: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/33.jpg)
ToolpathToolpath
Run toolpath calculation
Toolpath
Contents
![Page 34: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/34.jpg)
Machining simulationMachining simulation
Machining result of previous operations
Machining result
Contents
![Page 35: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/35.jpg)
Create operationCreate operation
Start create operation dialog
Finishing operations group
2D contouring operation
Use Fill parameters option to pass parameters from one of previous operations to the new one
New operation
Contents
![Page 36: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/36.jpg)
Job assignmentJob assignment
We used Fill parameters option to pass parameters of the previous 2D contouring operation to the new operation. Therefore we only change the job assignment for the newly created 2D contouring operation
Surface edge as the job assignment
Job assignment tab
Job assignment
Surface edge as the job assignment
Surfaces defining top and bottom levels of machining
Contents
![Page 37: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/37.jpg)
Toolpath calculationToolpath calculation
Run toolpath calculation
Toolpath
Contents
![Page 38: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/38.jpg)
Machining simulationMachining simulation
Machining result of previous operations
Result of machining simulation
Contents
![Page 39: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/39.jpg)
Create new operationCreate new operation
Create operation menu
Group of finishing operations
2D contouring operation
New operation
Contents
![Page 40: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/40.jpg)
Job assignmentJob assignment
Edge of the slot bottom
Job assignment tab
Slot bottom edge
Surfaces bounding top and bottom levels of machining
Job assignment
Contents
![Page 41: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/41.jpg)
Select toolholderSelect toolholder
Toolholder
List of toolholdersTool
Contents
![Page 42: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/42.jpg)
Machining parametersMachining parameters
Contents
![Page 43: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/43.jpg)
ToolpathToolpath
Расчет траектории
Toolpath
Contents
![Page 44: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/44.jpg)
Machining simulationMachining simulation
Machining result of previous operations
Machining result
Contents
![Page 45: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/45.jpg)
Create new operationCreate new operation
Create operation menu
Roughing operations group
Hole machining 5D operation
New operation
Contents
![Page 46: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/46.jpg)
Select toolholderSelect toolholder
Toolholder
List of toolholders Tool
Contents
![Page 47: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/47.jpg)
Job assignmentJob assignment
Job assignment tab
Inner surfaces of holes
Рабочее заданиеJob assignment method
Job assignment
Contents
![Page 48: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/48.jpg)
Machining parametersMachining parameters
Contents
![Page 49: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/49.jpg)
ToolpathToolpath
Calculate toolpath
Toolpath
Contents
![Page 50: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/50.jpg)
Machining simulationMachining simulation
Machining result of previous operations
Result of machining
Contents
![Page 51: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/51.jpg)
Tools listTools list
Create tools list
Tools list dialogViews configuration
Object visibility panel
Document header
Contents
![Page 52: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/52.jpg)
Tools listTools list
List of operations
Document header
List of tools
Machining time
Views of geometry model
Contents
![Page 53: Lathe-milling machining Contents. Geometry model In this example the part is an imported 3D model and the workpiece is drafted in the built-in 2D Geometry](https://reader037.vdocuments.site/reader037/viewer/2022110208/56649db55503460f94aa7320/html5/thumbnails/53.jpg)
PostprocessorsPostprocessors
Generate NC-program
Postprocessor configuration file
NC-program file
NC-program listing
Contents