SpermfugeTemperature Regulated Centrifuge
SF 800
We make it possible
Technical Specification
Temperature ManagementDigital programming via microprocessor control in 1.0 C increments.measurement of temperature in chamber via digital sensor. Over temperature protection system independent of microprocessor control.
Range 2 °C above ambient to 42 °C Control ± 1 °CStability ± 1 °Cuniformity ± 1 °C
Centrifugation Details Max rotational speed 2200 RPMRotational speed range 300 to 2200 RPMRelative centrifugal force 800 g maxAcceleration and braking programmableRotor capacity 8 x 15 mlChoice of tubes 6ml, 14ml, 15ml
Electrical supplyOperating Voltage 100 120 Volts 60 Hz or 220 240 Volts 50 HzPower consumption 450 watts max
Spermfuge SF 800 100 120 Volts 60 Hz order code FX 1055Spermfuge SF 800 220 240 Volts 50 Hz order code FX 1056
Ordering information
Dimensions
470 mm385 mm
22
0 m
m
specifications subject to change without notice
Distributor
C
Q
Traceability calibration in accordance with national and international standards, NIST USA
Individual and expressive quality control certificate
www.shivaniscientific.comFor more details go to
Shivani Scientific Industries (P) Ltd+ 91 22 2845 6768+ 91 22 2845 6769+ 91 22 2845 6770+ 91 22 2845 7140+ 91 22 2845 6766
Tel -
Fax -e-mail [email protected] [email protected]
26A Raju Industrial Estate, Penkar Pada RoadNear Dahisar Check Naka, Mira-401104Dist. Thane (Mumbai) Maharashtra, INDIA
SPERMFUGE is an improvised centrifuge, dedicated totally for elevating the total motile sperm recovery from the parent semen sample, by controlling/maintaining the main parameter of “Temperature” thus aimed at Enhancing the ART results. The instrument has been designed to regulate and subsequently maintain the “Critical” inner chamber temperature before, after and during centrifugation. Maintenance of this critical temperature throughout the entire sperm processing procedure helps the sperm maintain their peak motility and enhanced linearity. The two of the most vital parameters which act as a yard stick to gauge the effectiveness of an ideal sperm wash. The existing dependency on RPM will be eliminated by on screen g-force selection.
The SPERMFUGE has been designed after taking into consideration detailed cellular physiological demands, locomotion kinetics and pooling together ideal suggestions, opinions, ideas and propositions of numerous Andrologists and Embryologists and other professionals in the field of Human Reproduction. The SPERMFUGE with its Temperaturecontrolled chamber ( room temperature to 42° C), programmable microprocessor based controls, multiple tube selection, accurate g-force selection, independent centrifugation and/or heating selection and other added advantages make it an ideal state of the art instrument for use in an ART laboratory.
An adjustable brake is provided to prevent the rotor from stopping too quickly at the end of run which might cause disturb to the firmly formed pellet. One can select 3 mode in acceleration and braking, slow medium and to fast can be given on screen.
CONCEPT
DESIGN
SPERMFUGE has a swing out rotor head toaccommodate 8 tubes maximum of 15 ml. The Sperm Fuge can accommodate 6ml Tubes (Falcon 2003), 14 ml Tubes (Falcon 2001) and 15 ml Tubes (Falcon 2095). The tube selection can be done on screen with the help of the encoder, which ensures an exact g-force selection.
ROTOR HEAD AND TUBE SELECTION
ACCELERATION AND BRAKINGSpermfugeTemperature Regulated Centrifuge
SF 800
The SPERMFUGE facilitates user selectable9 programs for different applications and also for different set of protocols as standardized by various clinics, laboratories and regulatry bodies. The user can select RCF, RPM, Tube Size, temperature, time for each program by a digital encoder.
MULTIPLE PROGRAMS
The heating range of SPERMFUGE's chamber is from 2°C above ambient to 42°C. The intelligent control system does not allow the centrifugation to commence till the set temperature is attained. However, one does have the option to commence the centrifugation without chamber heating and to commence the chamber heating without centrifugation.
TEMPERATURE AND CENTRIFUGATION
The Vision port in the lead at the center helpsto confirm rotational speed with a stroboscopic device. The safety interlock in the lead prevents accidental opening once the Rotor is operational. The maximum RCF is 800g which prevents accidental damage to the sperm.
OPERATING SECURITY
The exact indication of g-force helps the ideal sperm pellet formation by subjecting the spermto an exact and precise amount of g-force unlike other Centrifuges where g-force is subject to RPM and the tube size. Now a days centrifugation speeds are never reported in RPM as those numbers are not useful for any one wantingto reproduce the method. (Being dependent Rotor radius.)
G FORCE
State of the art microcontroller with optomagnetic encoder provides intelligent control system. Digital programming via microprocessor control for various parameters including temperature, RCF and time. The parameters are displayed on four line LCD display .
The SPERMFUGE is virtually maintenance free since it utilizes brushless drive motor. The motor is extremely smooth even during running at the maximum speed. The motor is electrically controlled during the acceleration and breaking with smoothness.
MAINTENANCE
SpermfugeTemperature Regulated Centrifuge
SF 800
SF 800SF 800
INTELLIGENT CONTROL SYSTEM