Transcript
Page 1: Ion Channels as Natural NanoDevices 1 Project Goals: Develop measurement, simulation, and fabrication tools needed to make ion channels into practical

Ion Channels as Natural NanoDevices 1

• Project Goals: Develop measurement, simulation, and fabrication tools needed to make ion channels into practical devices that can be controlled for our use.

• Technical Approach – Measure currents from single protein molecules of known and modified

ATOMIC structure, in a wide range of solutions– Compare measurements with currents predicted from mean field theories and

transport Monte Carlo, so we understand the PHYSICAL BASIS OF SELECTIVITY and permeation.

– Fabricate sheets of channels as strong as SaranWrap that generate microamps of signal. Channel Sheets might be the silicon wafer of ionic transistors.

Porins Gramicidin

Page 2: Ion Channels as Natural NanoDevices 1 Project Goals: Develop measurement, simulation, and fabrication tools needed to make ion channels into practical

Cl Channel AgonistChannel

Ion Channels as Natural NanoDevices 2

Technical Approach

– Compare measurements with currents predicted from mean field theories and transport Monte Carlo, so we understand the PHYSICAL BASIS OF SELECTIVITY and Permeation.

Calcium Channel Na Channel

Page 3: Ion Channels as Natural NanoDevices 1 Project Goals: Develop measurement, simulation, and fabrication tools needed to make ion channels into practical

Figure from Mashl/Jakobsson

Single molecule detection Power of protein engineering Current flow changed by binding Frequency reveals concentration Amplitude reveals identity Durable only in lab setting

Biomimetics: Functionality of ion channels into nanopores (CNTs)

Ideal for IC based chips

Fundamental issues: Transport of water, electrolytes and analytes through CNT

Ion Channels, Nanopore Sensors, Aluru et al 3

Page 4: Ion Channels as Natural NanoDevices 1 Project Goals: Develop measurement, simulation, and fabrication tools needed to make ion channels into practical

Nature 414, 188 - 190 (2001) Our Simulations

Occupancy of Water in SWCNT 4

Page 5: Ion Channels as Natural NanoDevices 1 Project Goals: Develop measurement, simulation, and fabrication tools needed to make ion channels into practical

Drift-Diffusion Simulation with Prophet 5 Umberto Ravaioli et al

• It is straightforward to include several multi-valent species in PROPHET without modifying the source-code.

-40

-30

-20

-10

0

10

20

30

Tri

mer

cur

rent

(pA

)

-100 -50 0 50 100

Vbias (mV)

50mM:50mM CaCl2 in ompF

D(Ca++)=0.206x10-5cm2/sec

D(Cl-)=0.528x10-5cm2/sec

experiment

experiment

3DPNP D(Ca++)=0.68x10-6cm2/sec

D(Cl-)=1.74x10 -6cm2/sec

-150

-100

-50

0

50

100

150

Tri

mer

cur

rent

(pA

)

1M:1M CaCl2 in ompF

-100 -75 -50 -25 0

Vbias(mV)

25 50 75 100

Example: CaCl2 in ompF porin

Page 6: Ion Channels as Natural NanoDevices 1 Project Goals: Develop measurement, simulation, and fabrication tools needed to make ion channels into practical

Monte Carlo Particle Simulation of Channels 6

Umberto Ravaioli et al

Gramicidin - Successful Na+ trajectory – Point particle model

The charged particle trajectories are evaluated froma detailed electric field distribution in space, obtained by solving the Poisson equation.

Page 7: Ion Channels as Natural NanoDevices 1 Project Goals: Develop measurement, simulation, and fabrication tools needed to make ion channels into practical

Ion Channels as Natural

NanoDevices 7

Technical Approach

– Fabricate sheets of channels as strong as SaranWrap that generate microamps of signal. Channel Sheets might be the silicon wafer of ionic transistors.


Top Related