INTELLIGENT ENGINE PowEr MANAGEMENT
Flightline Systems has designed and manu-factured precision Engine Instrumentation for nearly four decades. Checkpoint is an intelligent engine monitoring system that combines the familiarity of two-inch round analog gauges with microprocessor based signal processing and digital display tech-nology.
Checkpoint Instruments provide an easy upgrade path from existing analog instruments. Flightline is uniquely equipped to address your new or retrofit program requirements and remain dedicated to providing cost effective solutions while main-taining superior customer service and support.
DOCUMENT CONTROL NUMBERAI-CP-Inst-BW_B
INSTRUMENTS
ULTrA ELEcTroNIcs rEsErvEs ThE rIGhT To MAkE chANGEs To sPEcIfIcATIoNs
of ProdUcTs dEscrIbEd IN ThIs dATA shEET AT ANy TIME wIThoUT NoTIcE ANd
wIThoUT obLIGATIoN To NoTIfy ANy PErsoN of sUch chANGEs.
© 2009 ULTrA ELEcTroNIcs INc.
ULTrA ELEcTroNIcs fLIGhTLINE sysTEMs
7625 oMNITEch PLAcE, vIcTor, Ny 14564
PhoNE: 585-924-4000, fAx: 585-924-5732
www.ULTrA -fEI.coM
fEATUrEs ANd bENEfITs
• Digital Design• Digital Augmented Display• High Accuracy – No “Null” or “Span” drift• Versatility – Adaptable to all input signals• Lightweight – Less than .5 LBS (0.6 Dual)• Very low power consumption <7 Watts• Full Built-in test (BIT) – continuous• Exceedance monitoring• Trend monitoring• Programmable alarms and enunciators• Continuous sensor reasonableness testing• Output warning signals• Single or dual function packages• Non-linear dial scales & custom markings• Lower cost, weight and ease of use versus glass
displays
fAMILIAr UsEr INTErfAcE bENEfITs• 2” Round analog display• Recessed pointer for minimal parallax error• Standard mounting• Snap-lock MS connectors• High quality back-lit display
GENErAL sPEcIfIcATIoNs
• Power:• Indicator: 12 to 28 Vdc• Lighting: 5 or 28 Vdc
• Accuracy:• Analog: ± 1.0% full Scale• Digital: ± 0.2% full Scale
• Temperature: • Operating:-40°to +55°C• Storage: -55°to +80°C
• FAA TSO: C43c, C44b, C45a, C47, C49b, C55• Environmental Qualification: DO-160D• Software Certification: DO-178B, Level C
INSTRUMENTS