Industriestr. 2
36088 Hünfeld
We take no responsibility for damages due to wrong installation.
T-Pipe Installation Chrysler 300C CRD
Remove the engine cover.
The red marked part is getting replaced by the T-pipe.
Industriestr. 2
36088 Hünfeld
We take no responsibility for damages due to wrong installation.
Remove the clamp and pull off the hose.
Remove the red rubber gasket from the hose.
Industriestr. 2
36088 Hünfeld
We take no responsibility for damages due to wrong installation.
The plastic-pipe going to the turbocharger has to be cut like in the picture.
Industriestr. 2
36088 Hünfeld
We take no responsibility for damages due to wrong installation.
Cut the T-pipe along the red line like shown.
Industriestr. 2
36088 Hünfeld
We take no responsibility for damages due to wrong installation.
First connect te T-pipe with the plastic-pipe and then with the turbocharger.
Then re-connect the small hose tot he T-pipe.
After adjusting the position, tighten the clamps.