1. Disconnect and remove existing flange / strainer assembly from drain pipe.

2. Place the drain flange in sink hole.

3. Attach flange nut to underside of flange, using o-ring and washer to seal the

sink hole.

4. Test seal by engaging strainer into flange and adding water. Make adjustments as required.

5. Attach flange to existing tailpiece drain pipes with slip nut provided. Remove strainer from

flange and drain water from the sink.

INSTALLATION INSTRUCTIONS

LARGE BASKET STRAINER

MODEL No's: 120

Strainer

Drain Flange

Sink

O-ring

Washer

Flange Nut

Slip Nut

(949) 417-5207

BRS-120 Santa Ana, Ca. 92705 6/10/2011

www.brasstech.com

Recommended installation by a Professional Plumbing Contractor