Download - Inner door locks. Project locks. - Nemef
nemef.com ASSA ABLOY, the global leaderin door opening solutions
Inner door locks.Project locks.Narrow style locks.
Mortise locks.
Mortise locks.
In the future we’ll also meet the demands for technical advances and innovations. We therefore reserve the right to make design modifications. Illustrations may thus also vary from the actual products. Despite thegreatest of care, printing errors or mistakes may be made. Nemef acceptsno responsibility in such cases and will not enter into any obligations ofany kind. No responsibility is taken for the correctness of any safetyregulations reproduced.
ASSA ABLOY Nederland B.V. guarantees an extensive and continually growing assortment of locks and builders’ hardware, such as door locks, profile cylinders, multi-point locks and access control. These quality products that leave the ASSA ABLOY plant reach their customers quickly and efficiently due to a hypermodern distribution centre in the Netherlands.
ASSA ABLOY is working today on the standard for tomorrow through innovative product development focused on contemporary user convenience. Within this brochure we give an overview of mortise locks.
Mortise locks.
PageInformation Information about locks 4
D140 Inner door locks according to DIN 18251-1 class 1 8
D141 Inner door locks according to DIN 18251-1 class 2 10
D141 SD Inner door locks VDS testet, according to DIN 18251-1 class 2 13
D147 Inner door locks according to DIN 18251-1 class 3 14
D196 Project locks according to DIN 18251-1 class 3 16
D197 Project locks according to DIN 18251-1 class 3 18
D541 Project locks according to DIN 18251-1 class 4 22
D542 Mortise X-ray locks according to DIN 18251-1 class 4 23
D066 Lockbody with spring loaded-hub 24
D118 Mortise dead lock 25
D125 Mortise latch lock 27
D126 Mortise latch lock 28
D153 Mortise sash lock 29
D161 PZW Sliding door lock with hook bolt 30
D162 Mortise sliding door lock with rim dead bolt 31
D166 Mortise sliding door lock with hook bolt 32
D167 PZ Mortise sliding door lock with pull handle. 33
D171 Roller bolt lock with dead bolt 34
340 Series mortise locks 35
6100 Series Project locks according to DIN 18251-1 class 3 36
6600 Series Project locks according to DIN 18251-1 class 3 37
D150 Glass door lock 38
D301 Narrow style sash lock 39
D305 Narrow style dead lock 40
D307 Narrow style latch 41
4128 Security dead lock 42
4169 Narrow style security sash lock 43
4185 Narrow style security pivot dead bolt lock 44
8691 Narrow style sash lock 45
8741 Narrow style sash lock 47
8791 Narrow style sash lock 48
9600 Narrow style sash lock 49
9620 Narrow style latch 50 9630 Narrow style night latch 51
9640 Narrow style dead lock (small case) 52
9650 Narrow style dead lock (large case) 53
9660 Narrow style pivot dead bolt lock 54
9670 Narrow style panic lock 55
9680 Narrow style roller bolt lock 56
9690 Narrow style hook bolt lock 57
Strike plates Strike plates 58
4
Information about locks.
InternationalSituation Symbols
inside
outside
DIN Left (1) DIN Right (2)
inside
outside
DIN Left (3) DIN Right (4)
Do not fix a knob profile cylinder in lock of panic doors.
Do not fit the square spindle with force.
Do not paint front, dead- and latch bolt.
If door furniture is not fixed do not throw dead bolt. Locks must be replaced when signs of damage are obvious.
Do not leave a key in the lock of panic locks.
Do not force door trim.
Do not drill through lockcases.
5
Overview of the EuropeanEN Standards for building hardware.
• Resistance/reliability.• Durability.• Safety.• Ease-of-use.• Guaranteed operability.• Dimensions.• Mechanical resistance.
In public buildings• Hospital.• Shopping centre.• Station.• Airport.
In private buildings• Apartment block.• Office.
• Emergency exit devices operated by a lever handle or push pad, for use on escape routes.
• Requirements and test methods.
• Panic exit devices operated by a horizontal bar, for use on escape routes.
• Requirements and test methods.
• Locks and latches.• Mechanically operated locks, latches and
locking plates.• Requirements and test methods.
Mechanically operated locks, latches and panic and emergency exit devices intended for use on fire/ smoke control doors within the European Economic Area are covered by Construction Products Directive mandate issued by the European Commission. Consequently, this standard is regarded as “harmonised” and compliance with it, supported by suitable evidence, allows for the application of the CE mark.
What are the advantages of anEN-tested product?
Where do thestandards apply?
EN 179
EN 1125
EN 12209
CE marking
6
EN 12209 Locks and latches - Mechanicallyoperated locks, latches and locking plates -Requirements and test methods.
Use
Specifications for the locking mechanism for emergency exits in accordance with theEN 12209 standard.
Classification
Nemef productsthat comply with theEN 12209 standard
This European standard specifies the requirements and test methods for durability, resistance, security, operation of the mechanical locks and their locking plates in accordance with the usage profile for the door. The correct grade must be chosen in line with the usage profile.
• Operation tested between -20°C and +80°C.• Category of use: - Grade 1: average frequency of use, very careful
users => private use. - Grade 2: high frequency of use, careful users =>
interior doors in offices. - Grade 3: very high frequency of use, high
probability of abuse => offices in public buildings.
• Durability: in accordance with the cycles and load on the day latch.
• Fire resistance: - Grade 0: not CF-approved. - Grade 1: CF-approved.• Safety.• Corrosion resistance.• Security.
The EN 12209 standard uses an 11 digit code to classify the mechanical locks.
Mechanical locks with a panic function and automatic locking.
1 2 3
A 1
B 2
C 3
F 4
G 5
H 6
L 7
M 8
R 9
S
W
X
1
2
3
Cate
gory
of u
se
Dur
abili
ty a
nd lo
ad o
n th
e da
y la
tch
Doo
r wei
ght a
nd c
losi
ng
forc
e
Low risk of abuse, verycareful users=>PRIVATE USE.
50,000 cycles,no load.
100,000 cycles, no load.
200,000 cycles,no load.
50,000 cycles,10 N load.
200,000 cycles,10 N load.
200,000 cycles,25 N load.
200,000 cycles,50 N load.
100,000 cycles,10 N load.
100,000 cycles,25 N load.
100,000 cycles,50 N load.
100,000 cycles,120 N load.
200,000 cycles,120 N load.
Up to 100 kg,50 N maximum.
Up to 200 kg,50 N maximum.
Up to 100 kg,25 N maximum.
More than 200 kgor as indicated,25 N maximum.
Up to 200 kg,15 N maximum.
More than 200 kgor as indicated,50 N maximum.
Up to 200 kg,25 N maximum.
Up to 100 kg,15 N maximum.
More than 200 kgor as indicated,15 N maximum.
Risk of abuse, careful users=>OFFICES.
High frequency of use by thepublic, with a high risk of abuse => PUBLIC BUILDINGS.
7
Classification EN 12209: 2003/AC: 2005.
4 5 6 7 8 9 10 11
0 1 A 0 0
A 2 B A A
B 3 C B B
C 4 D C C
D 5 E D
DE 6 F E
EF 7 G F
F
G H G
G
J H
H
0 K
0 L
M
1 N 0
P 1
R 2
3
4
Fire
resi
stan
ce
Safe
ty
Corr
osio
n re
sist
ance
and
te
mpe
ratu
re re
sist
ance
Secu
rity:
resi
stan
ceto
att
ack
usin
g a
drill
Area
of a
pplic
atio
nof
the
door
Type
of k
ey o
peni
ng:
latc
h m
echa
nism
Type
of s
quar
e sh
aft
Iden
tifica
tion
of th
e ke
y
Minimal; no resistance.
Mortise lock;without limitationon the application.
Not applicable. No requirements.
Weak; no resistance.
Mortise lock; hinged door.
Cylinder lock; manual.
At least 3 locking pins.
Average;no resistance.
Mortise lock;sliding door.
Cylinder lock; automatic. At least 5 locking pins.
High;no resistance.
Very high;no resistance.
Face-fit lock; sliding door.
Lever lock;automatic.
With knob or sprung lever.
At least 6 locking pins with an extensive number
of combinations.
Face-fit lock; hinged door, latch on interior face.
Mortise lock;hinged door;supported.
Lock withoutkey; manual.
With unsprung leverfor intensive use.
At least 7 locking pinswith an extensive number
of combinations.
Mortise lock; hinged door;supported, latch on interior face.
High; with resistance.
Face-fit lock;hinged door. Lever lock; manual.
Lock without lock shaft aperture.
At least 6 locking pins.
Very high;with resistance.
Mortise lock;without limitationon the application.
Lever lock; manual with intermediary.
With unsprung lever.
At least 7 locking pins .
Face-fit lock; sliding door, latch on interior face.
Face-fit lock; hinged door, opening tothe exterior.
Lock with night latch without key; automatic.
With sprung lever for intensive use indicated by the manufacturer.
At least 8 locking pinswith an extensive number
of combinations.
Face-fit lock; hinged door, opening to the interior, latch on interior face.
Mortise lock; hingeddoor, latch on interior face.
No requirements
Not suitable for use on fire doors and/or smoke containment doors.
Suitable for use on fire doors and/or smoke containment doors.
No requirements.
Low resistance; no requirements.
Average resistance; no requirements.
High resistance; no requirements.
Very high resistance;no requirements.
Average resistance; between -20°Cand +80°C.
High resistance; between -20°C and +80°C.
Very high resistance; between -20°Cand +80°C.
Mortise lock; sliding door, latch on interior face.
Face-fit lock;without limitation on the application.
Cylinder lock; manual with intermediary.
At least 3 locking pins with an extensive number
of combinations.
8
D140.BB inner door lock.
• To take key. • Backset 55 mm.• Distance 72 mm.• Follower 8 mm plastic.• Front plate alu finish laquered.• Single throw.• With 1 key mounted on front plate
Differs 15, 16, 35 und 36.• Latch and dead bolt pvc (K) or metal (G).• Handed.• Without strike plate.• According to DIN 18251-1, class 1.
D140
Type Front plate Shape Finish Handing Article nr.
D140 BB 18x235 mm Rounded Plastic DIN LH 9103621111
D140 BB 18x235 mm Rounded Plastic DIN RH 9103621112
D140 BB 18x235 mm Rounded Metal DIN LH 9103621151
D140 BB 18x235 mm Rounded Metal DIN RH 9103621152
D140 BB 18x235 mm Square Plastic DIN LH 9103622111
D140 BB 18x235 mm Square Plastic DIN RH 9103622112
D140 BB 20x235 mm Rounded Plastic DIN LH 9103623111
D140 BB 20x235 mm Rounded Plastic DIN RH 9103623112
D140 BB 20x235 mm Rounded Metal DIN LH 9103623151
D140 BB 20x235 mm Rounded Metal DIN RH 9103623152
D140 BB 20x235 mm Square Plastic DIN LH 9103624111
D140 BB 20x235 mm Square Plastic DIN RH 9103624112
D140 BB 20x235 mm Square Metal DIN LH 9103624151
D140 BB 20x235 mm Square Metal DIN RH 9103624152
9
D140.BATH/WC inner door lock.
• For bath/WC. • Backset 55 mm.• Distance 78 mm.• Follower 8 mm plastic.• Front plate alu finish laquered.• Single throw.• Latch and deadbolt pvc (K) or metal (G).• Handed.• Without strike plate.• According to DIN 18251-1, class 1.
D140
Type Front plate Shape Latch / dead bolt Handing Article nr.
D140 BATH/WC 18x235 mm Rounded Plastic DIN LH 9103421111
D140 BATH/WC 18x235 mm Rounded Plastic DIN RH 9103421112
D140 BATH/WC 18x235 mm Rounded Metal DIN LH 9103421151
D140 BATH/WC 18x235 mm Rounded Metal DIN RH 9103421152
D140 BATH/WC 20x235 mm Rounded Plastic DIN LH 9103423111
D140 BATH/WC 20x235 mm Rounded Plastic DIN RH 9103423112
D140 BATH/WC 20x235 mm Rounded Metal DIN LH 9103423151
D140 BATH/WC 20x235 mm Rounded Metal DIN RH 9103423152
D140 BATH/WC 20x235 mm Square Plastic DIN LH 9103424111
D140 BATH/WC 20x235 mm Square Plastic DIN RH 9103424112
D140 BATH/WC 20x235 mm Square Metal DIN LH 9103424151
D140 BATH/WC 20x235 mm Square Metal DIN RH 9103424152
D140 BATH/WC 24x235 mm Rounded Metal DIN LH 9103424151
D140 BATH/WC 24x235 mm Rounded Metal DIN RH 9103424152
10
D141.PZW Inner door lock.
• To take profile cylinder. • Key action on latch bolt.• Backset 55 mm.• Distance 72 mm.• Combination tension follower 8 mm.• Front plate alu finish laquered
or stainless steel.• Double throw.• Latch and dead bolt diecast zinc plated.• Handed.• Without strike plate.• According to DIN 18251-1, class 2.
D141
Type Front plate Shape Finish Handing Article nr.
D141 PZW 18x235 mm Rounded Alu finish lacq. DIN LH 9751410027
D141 PZW 18x235 mm Rounded Alu finish lacq. DIN RH 9751410028
D141 PZW 18x235 mm Square Alu finish lacq. DIN LH 9751410038
D141 PZW 18x235 mm Square Alu finish lacq. DIN RH 9751410037
D141 PZW 20x235 mm Rounded Stainless steel DIN LH 9751410008
D141 PZW 20x235 mm Rounded Stainless steel DIN RH 9751410009
D141 PZW 20x235 mm Rounded Alu finish lacq. DIN LH 9751410011
D141 PZW 20x235 mm Rounded Alu finish lacq. DIN RH 9751410012
D141 PZW 20x235 mm Square Alu finish lacq. DIN LH 9751410029
D141 PZW 20x235 mm Square Alu finish lacq. DIN RH 9751410030
D141 PZW 24x235 mm Rounded Alu finish lacq. DIN LH 9751410064
D141 PZW 24x235 mm Rounded Alu finish lacq. DIN RH 9751410065
D141 PZW 24x235 mm Square Alu finish lacq. DIN LH 9751410039
D141 PZW 24x235 mm Square Alu finish lacq. DIN RH 9751410040
11
D141.BB Inner door lock.
• To take key.• Backset 55 mm.• Distance 72 mm.• Combination tension follower 8 mm.• Front plate alu finish laquered
or stainless steel.• Double throw.• With 1 key.• Latch and dead bolt diecast zinc plated.• Handed.• Without strike plate.• According to DIN 18251-1, class 2.
D141
Type Front plate Shape Finish Handing Article nr.
D141 BB 18x235 mm Rouded Alu finish lacq. DIN LH 9751410025
D141 BB 18x235 mm Rouded Alu finish lacq. DIN RH 9751410026
D141 BB 18x235 mm Square Alu finish lacq. DIN LH 9751410047
D141 BB 18x235 mm Square Alu finish lacq. DIN RH 9751410048
D141 BB 20x235 mm Rouded Stainless steel DIN LH 9751410000
D141 BB 20x235 mm Rouded Stainless steel DIN RH 9751410001
D141 BB 20x235 mm Rouded Alu finish lacq. DIN LH 9751410004
D141 BB 20x235 mm Rouded Alu finish lacq. DIN RH 9751410005
D141 BB 20x235 mm Square Alu finish lacq. DIN LH 9751410002
D141 BB 20x235 mm Square Alu finish lacq. DIN RH 9751410003
D141 BB 24x235 mm Rouded Stainless steel DIN LH 9751410006
D141 BB 24x235 mm Rouded Stainless steel DIN RH 9751410007
12
D141.BATH/WC Inner door lock.
• For bath.• Backset 55 mm.• Distance 78 mm.• Combination tension follower 8 mm.• Front plate alu finish laquered
or stainless steel.• Double throw.• Latch and dead bolt diecast zinc plated.• Handed.• Without strike plate.• According to DIN 18251-1, class 2.
D141
Type Front plate Shape Finish Handing Article nr.
D141 BATH/WC 20X235 mm Rounded Stainless steel DIN LH 9751410021
D141 BATH/WC 20X235 mm Rounded Stainless steel DIN RH 9751410022
D141 BATH/WC 20X235 mm Rounded Alu finish lacq. DIN LH 9751410023
D141 BATH/WC 20X235 mm Rounded Alu finish lacq. DIN RH 9751410024
D141 BATH/WC 20X235 mm Square Alu finish lacq. DIN LH 9751410031
D141 BATH/WC 20X235 mm Square Alu finish lacq. DIN RH 9751410032
13
D141.PZW-SD Inner door lock.
• Requirements according to class 3, VDS tested.• To take profile cylinder. • Key action on latch bolt.• Backset 55 mm.• Distance 72 mm.• Cast Iron fix follower 8 mm.• Front plate alu finish laquered. • Double throw.• Latch cast iron nickle plated.• Dead bolt steel, zinc plated.• Handed.• Without strike plate.• According to DIN 18251-1, class 2.
D141
Type Front plate Shape Finish Handing Article nr.
D141 SD 20x235 mm Rounded Alu finish lacq. DIN LH 9751410033
D141 SD 20x235 mm Rounded Alu finish lacq. DIN RH 9751410034
D141 SD 20x235 mm Square Alu finish lacq. DIN LH 9751410035
D141 SD 20x235 mm Square Alu finish lacq. DIN RH 9751410036
14
D147.PZW Mortise lock.
• To take profile cylinder.• Key action on latch bolt.• Backset 55, 60 und 65 mm.• Distance 72 mm.• Combination tension follower 8 mm. • Front plate alu finish laquered
or stainless steel.• Double throw.• Latch and dead bolt steel, zinc plated.• Handed.• Without strike plate.• According DIN 18251-1, class 3.
D147
Type Backset Front plate Shape Finish Handing Article nr.
D147 PZW 55 mm 20x235 mm Rounded Alu finish lacq. DIN LH 9106913011
D147 PZW 55 mm 20x235 mm Rounded Alu finish lacq. DIN RH 9106913012
D147 PZW 55 mm 20x235 mm Square Alu finish lacq. DIN LH 9106914011
D147 PZW 55 mm 20x235 mm Square Alu finish lacq. DIN RH 9106914012
D147 PZW 55 mm 20x235 mm Rounded Stainless steel DIN LH 9106933011
D147 PZW 55 mm 20x235 mm Rounded Stainless steel DIN RH 9106933012
D147 PZW 55 mm 24x235 mm Rounded Stainless steel DIN LH 9106937011
D147 PZW 55 mm 24x235 mm Rounded Stainless steel DIN RH 9106937012
D147 PZW 55 mm 24x235 mm Square Stainless steel DIN LH 9106938011
D147 PZW 55 mm 24x235 mm Square Stainless steel DIN RH 9106938012
D147 PZW 60 mm 20x235 mm Rounded Alu finish lacq. DIN LH 9106913021
D147 PZW 60 mm 20x235 mm Rounded Alu finish lacq. DIN RH 9106913022
D147 PZW 60 mm 20x235 mm Square Alu finish lacq. DIN LH 9106914021
D147 PZW 60 mm 20x235 mm Square Alu finish lacq. DIN RH 9106914022
D147 PZW 60 mm 20x235 mm Rounded Stainless steel DIN LH 9106933021
D147 PZW 60 mm 20x235 mm Rounded Stainless steel DIN RH 9106933022
D147 PZW 60 mm 24x235 mm Rounded Alu finish lacq. DIN LH 9106917021
D147 PZW 60 mm 24x235 mm Rounded Alu finish lacq. DIN RH 9106917022
D147 PZW 60 mm 24x235 mm Rounded Stainless steel DIN LH 9106937021
D147 PZW 60 mm 24x235 mm Rounded Stainless steel DIN RH 9106937022
D147 PZW 65 mm 20x235 mm Rounded Alu finish lacq. DIN LH 9106913031
D147 PZW 65 mm 20x235 mm Rounded Alu finish lacq. DIN RH 9106913032
D147 PZW 65 mm 20x235 mm Rounded Stainless steel DIN LH 9106933031
D147 PZW 65 mm 20x235 mm Rounded Stainless steel DIN RH 9106933032
Version A B C D
PZW 55, 60, 65 72 20 20
15
D147.BATH/WC Mortise lock.
• For bath/WC.• Backset 55 und 60 mm.• Distance 78 mm.• Combination tension follower 8 mm. • Front plate stainless steel.• Double throw.• Latch and dead bolt steel, zinc plated.• Handed.• Without strike plate.• According to DIN 18251-1, class 3.
D147
Version A B C D
BATH/WC 55, 60 78 10 10
Type Backset Front plate Shape Finish Handing Article nr.
D147 BATH/WC 55 mm 20x235 mm Rounded Stainless steel DIN LH 9106433011
D147 BATH/WC 55 mm 20x235 mm Rounded Stainless steel DIN RH 9106433012
D147 BATH/WC 60 mm 20x235 mm Rounded Stainless steel DIN LH 9106433021
D147 BATH/WC 60 mm 20x235 mm Rounded Stainless steel DIN RH 9106433022
D147 BATH/WC 55 mm 24x235 mm Rounded Stainless steel DIN LH 9106437011
D147 BATH/WC 55 mm 24x235 mm Rounded Stainless steel DIN RH 9106437012
D147 BATH/WC 60 mm 24x235 mm Rounded Stainless steel DIN LH 9106437021
D147 BATH/WC 60 mm 24x235 mm Rounded Stainless steel DIN RH 9106437022
16
D196.PZW Project lock.
•To take profile cylinder.• Key action on latch bolt.• Backset 55, 60 und 65 mm.• Distance 72 mm.• Follower 8 mm.• Front plate stainless steel.• Double throw.• Latch and dead bolt nickle plated.• Handed.• Without strike plate (P7000/17).• According to DIN 18251-1, class 3.
D196
Type Backset Front plate Shape Handing Article nr.
D196 PZW 55 mm 20x235 mm Rounded DIN LH 9751960000
D196 PZW 55 mm 20x235 mm Rounded DIN RH 9751960001
D196 PZW 55 mm 24x235 mm Rounded DIN LH 9751960006
D196 PZW 55 mm 24x235 mm Rounded DIN RH 9751960007
D196 PZW 60 mm 20x235 mm Rounded DIN LH 9751960002
D196 PZW 60 mm 20x235 mm Rounded DIN RH 9751960003
D196 PZW 60 mm 24x235 mm Rounded DIN LH 9751960008
D196 PZW 60 mm 24x235 mm Rounded DIN RH 9751960009
D196 PZW 65 mm 20x235 mm Rounded DIN LH 9751960004
D196 PZW 65 mm 20x235 mm Rounded DIN RH 9751960005
D196 PZW 65 mm 24x235 mm Rounded DIN LH 9751960010
D196 PZW 65 mm 24x235 mm Rounded DIN RH 9751960011
Version A B C
PZW 55, 60, 65 72 20
17
D196.BATH/WC Project lock.
• For Bath/WC.• Backset 55, 60 und 65 mm.• Distance 78 mm.• Follower 8 mm. • Front plate stainless steel.• Double throw.• Latch and deadbolt nickle plated.• Handed.• Without strike plate (P7000/17).• According to DIN 18251-1, class 3.
D196
Type Backset Front plate Shape Handing Article nr.
D196 BATH/WC 55 mm 20x235 mm Rounded DIN LH 9751960048
D196 BATH/WC 55 mm 20x235 mm Rounded DIN RH 9751960049
D196 BATH/WC 55 mm 24x235 mm Rounded DIN LH 9751960054
D196 BATH/WC 55 mm 24x235 mm Rounded DIN RH 9751960055
D196 BATH/WC 60 mm 20x235 mm Rounded DIN LH 9751960050
D196 BATH/WC 60 mm 20x235 mm Rounded DIN RH 9751960051
D196 BATH/WC 60 mm 24x235 mm Rounded DIN LH 9751960056
D196 BATH/WC 60 mm 24x235 mm Rounded DIN RH 9751960057
D196 BATH/WC 65 mm 20x235 mm Rounded DIN LH 9751960052
D196 BATH/WC 65 mm 20x235 mm Rounded DIN RH 9751960053
D196 BATH/WC 65 mm 24x235 mm Rounded DIN LH 9751960058
D196 BATH/WC 65 mm 24x235 mm Rounded DIN RH 9751960059
Version A B C
PZW 55, 60, 65 72 20
18
D197.PZW Project lock.
• To take profile cylinder.• Key action on latch bolt.• Backset 55, 60, 65, 70, 80 und 100 mm.• Distance 72 mm.• Fixed follower mounted in self-lubricating
sinter metal ring 8 mm.• Front plate stainless steel.• Double throw.• Latch and dead bolt steel nickle plated.• Latch stop with noise reduction.• Handed.• Option: with anti-friction latch bolt.• Without strike plate (P7000/17).• According to DIN 18251-1, class 3.
D197
Version A B C
PZW 55, 60, 65, 70, 80, 90, 100 72 20
19
D197.PZW Project lock.
Type Backset Front plate Shape Option Handing Article nr.
D197 PZW 55 mm 20x235 mm Rounded DIN LH 9700131001
D197 PZW 55 mm 20x235 mm Rounded DIN RH 9700131002
D197 PZW 55 mm 20x235 mm Rounded Anti-friction latch DIN LH 9700131021
D197 PZW 55 mm 20x235 mm Rounded Anti-friction latch DIN RH 9700131022
D197 PZW 55 mm 20x235 mm Square DIN LH 9700132001
D197 PZW 55 mm 20x235 mm Square DIN RH 9700132002
D197 PZW 55 mm 24x235 mm Rounded DIN LH 9700135001
D197 PZW 55 mm 24x235 mm Rounded DIN RH 9700135002
D197 PZW 55 mm 24x235 mm Rounded Anti-friction latch DIN LH 9700135021
D197 PZW 55 mm 24x235 mm Rounded Anti-friction latch DIN RH 9700135022
D197 PZW 55 mm 24x235 mm Square DIN LH 9700136001
D197 PZW 55 mm 24x235 mm Square DIN RH 9700136002
D197 PZW 60 mm 20x235 mm Rounded DIN LH 9700231001
D197 PZW 60 mm 20x235 mm Rounded DIN RH 9700231002
D197 PZW 60 mm 20x235 mm Rounded Anti-friction latch DIN LH 9700231021
D197 PZW 60 mm 20x235 mm Rounded Anti-friction latch DIN RH 9700231022
D197 PZW 60 mm 20x235 mm Square DIN LH 9700232001
D197 PZW 60 mm 20x235 mm Square DIN RH 9700232002
D197 PZW 60 mm 24x235 mm Rounded DIN LH 9700235001
D197 PZW 60 mm 24x235 mm Rounded DIN RH 9700235002
D197 PZW 60 mm 24x235 mm Rounded Anti-friction latch DIN LH 9700235021
D197 PZW 60 mm 24x235 mm Rounded Anti-friction latch DIN RH 9700235022
D197 PZW 60 mm 24x235 mm Square DIN LH 9700236001
D197 PZW 60 mm 24x235 mm Square DIN RH 9700236002
D197 PZW 60 mm 24x235 mm Square Anti-friction latch DIN LH 9700236021
D197 PZW 60 mm 24x235 mm Square Anti-friction latch DIN RH 9700236022
D197 PZW 65 mm 20x235 mm Rounded DIN LH 9700331001
D197 PZW 65 mm 20x235 mm Rounded DIN RH 9700331002
D197 PZW 65 mm 24x235 mm Rounded DIN LH 9700335001
D197 PZW 65 mm 24x235 mm Rounded DIN RH 9700335002
D197 PZW 65 mm 24x235 mm Square DIN LH 9700336001
D197 PZW 65 mm 24x235 mm Square DIN RH 9700336002
D197 PZW 70 mm 20x235 mm Rounded DIN LH 9700431001
D197 PZW 70 mm 20x235 mm Rounded DIN RH 9700431002
D197 PZW 70 mm 24x235 mm Rounded DIN LH 9700435001
D197 PZW 70 mm 24x235 mm Rounded DIN RH 9700435002
D197 PZW 70 mm 24x235 mm Square DIN LH 9700436001
D197 PZW 70 mm 24x235 mm Square DIN RH 9700436002
D197 PZW 80 mm 20x235 mm Rounded DIN LH 9700631001
D197 PZW 80 mm 20x235 mm Rounded DIN RH 9700631002
D197 PZW 80 mm 20x235 mm Rounded Anti-friction latch DIN LH 9700631021
D197 PZW 80 mm 20x235 mm Rounded Anti-friction latch DIN RH 9700631022
D197 PZW 80 mm 24x235 mm Rounded DIN LH 9700635001
D197 PZW 80 mm 24x235 mm Rounded DIN RH 9700635002
D197 PZW 100 mm 24x235 mm Rounded DIN LH 9700935001
D197 PZW 100 mm 24x235 mm Rounded DIN RH 9700935002
D197 PZW 100 mm 24x235 mm Square DIN LH 9700936001
D197 PZW 100 mm 24x235 mm Square DIN RH 9700936002
20
D197.FA Latch.
• To take latch.• Backset 55 und 60 mm.• Fixed follower mounted in self-lubricating
sinter metal ring 8 mm.• Front plate stainless steel.• Latch steel nickle plated.• Latch stop with noise reduction.• Handed.• Without strike plate.• According to DIN 18251-1, class 3.
D197
Type Backset Front plate Shape Handing Article nr.
D197 FA 55 mm 20x235 mm Rounded DIN LH 9703131001
D197 FA 55 mm 20x235 mm Rounded DIN RH 9703131002
D197 FA 60 mm 20x235 mm Rounded DIN LH 9703231001
D197 FA 60 mm 20x235 mm Rounded DIN RH 9703231002
D197 FA 60 mm 24x235 mm Rounded DIN LH 9703235001
D197 FA 60 mm 24x235 mm Rounded DIN RH 9703235002
D197 FA 60 mm 24x235 mm Square DIN LH 9703236001
D197 FA 60 mm 24x235 mm Square DIN RH 9703236002
21
D197.BATH/WC Project lock.
• For bath/WC.• Backset 55, 60 und 65 mm.• Entfernung 78 mm.• Fixed follower mounted in self-lubricating
sinter metal ring 8 mm.• Front plate stainless steel.• Double throw.• Latch and dead bolt steel nickle plated.• Latch stop with noise reduction.• Handed.• Option: with anti-friction latch bolt.• Without strike plate (P7000/17).• According to DIN 18251-1, class 3.
D197
Type Backset Front plate Shape Option Handing Article nr.
D197 BATH/WC 55 mm 20x235 mm Rounded DIN LH 9704131001
D197 BATH/WC 55 mm 20x235 mm Rounded DIN RH 9704131002
D197 BATH/WC 55 mm 20x235 mm Rounded Anti-friction latch DIN LH 9704131021
D197 BATH/WC 55 mm 20x235 mm Rounded Anti-friction latch DIN RH 9704131022
D197 BATH/WC 55 mm 24x235 mm Rounded DIN LH 9704135001
D197 BATH/WC 55 mm 24x235 mm Rounded DIN RH 9704135002
D197 BATH/WC 55 mm 24x235 mm Rounded Anti-friction latch DIN LH 9704135021
D197 BATH/WC 55 mm 24x235 mm Rounded Anti-friction latch DIN RH 9704135022
D197 BATH/WC 55 mm 24x235 mm Square Anti-friction latch DIN LH 9704136021
D197 BATH/WC 55 mm 24x235 mm Square Anti-friction latch DIN RH 9704136022
D197 BATH/WC 60 mm 20x235 mm Rounded DIN LH 9704231001
D197 BATH/WC 60 mm 20x235 mm Rounded DIN RH 9704231002
D197 BATH/WC 60 mm 24x235 mm Rounded DIN LH 9704235001
D197 BATH/WC 60 mm 24x235 mm Rounded DIN RH 9704235002
D197 BATH/WC 60 mm 24x235 mm Rounded Anti-friction latch DIN LH 9704235021
D197 BATH/WC 60 mm 24x235 mm Rounded Anti-friction latch DIN RH 9704235022
D197 BATH/WC 60 mm 24x235 mm Square DIN LH 9704236001
D197 BATH/WC 60 mm 24x235 mm Square DIN RH 9704236002
D197 BATH/WC 65 mm 20x235 mm Rounded DIN LH 9704331001
D197 BATH/WC 65 mm 20x235 mm Rounded DIN RH 9704331002
D197 BATH/WC 65 mm 24x235 mm Rounded DIN LH 9704335001
D197 BATH/WC 65 mm 24x235 mm Rounded DIN RH 9704335002
Version A B C
PZW 55, 60, 65 78 10
22
D541.PZW Heavy duty project lock.
• To take profile cylinder.• Key action on latch bolt.• Backset 55, 60 und 65 mm.• Distance 72 mm.• Fixed follower mounted in self-lubricating
sinter metal ring 8 mm.• Front plate stainless steel.• Double throw.• Malleable cast iron latch and polished
nickle plated steel bolt. • Latch stop with noise reduction.• Protective sleeves around fixing holes.• Handed.• Without strike plate (P7000/17).• According to DIN 18251-1, class 4.• VDS tested.
D541
Type Backset Front plate Shape Handing Article nr.
D541 PZW 55 mm 20x235 mm Rounded DIN LH 9740101001
D541 PZW 55 mm 20x235 mm Rounded DIN RH 9740101002
D541 PZW 60 mm 20x235 mm Rounded DIN LH 9740201001
D541 PZW 60 mm 20x235 mm Rounded DIN RH 9740201002
D541 PZW 60 mm 24x235 mm Rounded DIN LH 9740209001
D541 PZW 60 mm 24x235 mm Rounded DIN RH 9740209002
D541 PZW 65 mm 20x235 mm Rounded DIN LH 9740301001
D541 PZW 65 mm 20x235 mm Rounded DIN RH 9740301002
D541 PZW 65 mm 24x235 mm Rounded DIN LH 9740309001
D541 PZW 65 mm 24x235 mm Rounded DIN RH 9740309002
Version A B C
PZW 55, 60, 65 72 20
23
D542.PZW Heavy duty mortise X-ray lock.
• To take profile cylinder.• Key action on both latch bolts.• Backset 40/80 mm.• Distance 72 mm.• Fixed follower mounted in self-lubricating
sinter metal ring 8 mm.• Front plate stainless steel.• Single throw.• Latch and dead bolt steel polished,
nickle plated. • Latch stop with noise reduction.• Handed.• Withouth strike plate (P7000/17).• According to DIN 18251-1.
D542
Type Backset Front plate Shape Handing Article nr.
D542 PZW 40/80 mm 20x235 mm Rounded DIN LH 9748601001
D542 PZW 40/80 mm 20x235 mm Rounded DIN RH 9748601002
Interior M4threaded bushes !!
24
D066.Lockbody with spring loaded hub.
D066• For sample boards for functional
demontrations of handles.• Follower 8 mm.• Lock case zinc plated.
Type Article nr.
D066 9750660000
Fi
hol
e
25
D118.PZ Mortise dead lock.
• To take profile cylinder.• Backset 55 und 60 mm• Follower 8 mm.• Front plate alu finish lacquered.• Dead bolt zinc plated.• Lock case zinc plated.• Non-handed.• Including strike plate.
D118
Type Backset Shape Finish Article nr.
D118 PZ 55 mm Rounded Alu finish lacq. 9751180006
D118 PZ 55 mm Square Stainless steel 9751180000
D118 PZ 55 mm Square Alu finish lacq. 9751180002
D118 PZ 60 mm Square Alu finish lacq. 9751180004
Version A B D E
PZ 55, 60 30 20 90
26
D118.BATH/WC dead lock.
D118• For bath.• Backset 55 mm.• Follower 8 mm.• Front plate alu finish lacquered or
stainless steel.• Dead bolt zinc plated.• Lock case zinc plated.• Non-handed.• Including strike plate.
Type Backset Shape Finish Article nr.
D118 BATH/WC 55 mm Rounded Stainless steel 9751180005
Version A B D E
BATH/WC 55 30 20 96
27
D125.Mortise latch.
• Backset 55 und 70 mm.• Fixed follower 8 mm.• Front plate alu finish lacquered or
stainless steel.• Latch zinc plated.• Handed.• Including strike plate.
D125
Type Backset Front plate Shape Finish Handing Article nr.
D125 55 mm 20x150 mm Rounded Alu finish lacq. DIN LH 9751250004
D125 55 mm 20x150 mm Rounded Alu finish lacq. DIN RH 9751250005
D125 70 mm 24x150 mm Rounded Stainless steel DIN LH 9751250006
D125 70 mm 24x150 mm Rounded Stainless steel DIN RH 9751250007
A B C
55, 70 30 93,5
28
D126.Mortise latch.
• To take profile cylinder. • Backset 55 mm.• Front plate stainless steel.• Latch zinc plated.• Handed.• Lock case zinc plated.• Including strike plate.
D126
Type Backset Front plate Shape Finish Handing Article nr.
D126 55 mm 20x150 mm Rounded Stainless steel DIN LH 9751260002
D126 55 mm 20x150 mm Rounded Stainless steel DIN RH 9751260003
A B C D
55 30 93,5 12
29
D153.PZW Mortise sash lock.
• To take profile cylinder.• Key action on latch bolt.• Backset 55, 65 und 80 mm.• Distance 92 mm.• Follewer cast iron 10 mm.• Front plate alu finish lacquered.• Double throw.• Latch and dead bolt zinc plated.• Handed.• Lock case zinc plated.• Without strike plate.
D153
Type Backset Front plate Shape Handing Article nr.
D153 55 mm 20x280 mm Square DIN LH 9751530015
D153 55 mm 20x280 mm Square DIN RH 9751530014
D153 55 mm 22x280 mm Square DIN LH 9751530005
D153 55 mm 22x280 mm Square DIN RH 9751530006
D153 65 mm 20x280 mm Rounded DIN LH 9751530000
D153 65 mm 20x280 mm Rounded DIN RH 9751530001
D153 65 mm 20x280 mm Square DIN LH 9751530013
D153 65 mm 20x280 mm Square DIN RH 9751530012
D153 65 mm 22x280 mm Rounded DIN LH 9751530016
D153 65 mm 22x280 mm Rounded DIN RH 9751530017
D153 65 mm 22x280 mm Square DIN LH 9751530002
D153 65 mm 22x280 mm Square DIN RH 9751530007
D153 65 mm 24x280 mm Square DIN LH 9751530004
D153 65 mm 24x280 mm Square DIN RH 9751530003
D153 65 mm 24x310 mm Square DIN LH 9751530018
D153 65 mm 24x310 mm Square DIN RH 9751530019
D153 65 mm 30x280 mm Square DIN LH 9751530022
D153 65 mm 30x280 mm Square DIN RH 9751530023
D153 80 mm 22x280 mm Square DIN LH 9751530008
D153 80 mm 22x280 mm Square DIN RH 9751530009
Version A B Comment
PZW 55, 65, 80 30 Partially open case
30
D161.PZW Sliding door lock with hook bolt.
• To take profile cylinder.• Key action on latch bolt.• Backset 65 mm.• Distance 72 mm.• Follower 9 mm.• Front plate stainless steel.• Non-handed.• Including strike plate.
D161
Type Backset Front plate Shape Finish Follower Article nr.
D161 65 mm 24x260 mm square Nirosta 9 mm 9751610002
31
D162.PZ/BB/BATH Mortise sliding door lockwith rim dead bolt.
• Backset 45, 55, 65 und 80 mm.• Frontplate alu finish lacquered
or stainless steel.• Rim dead bolt zinc plated.• Non-handed.• Lock case zinc plated.• Including strike plate.
D162
Type Backset Front plate Shape Finish Article nr.
D162 PZ 45 mm 20x150 mm Rounded Stainless steel 9751620009
D162 PZ 55 mm 20x150 mm Rounded Alu finish lacq. 9751620002
D162 PZ 55 mm 20x150 mm Rounded Stainless steel 9751620001
D162 PZ 55 mm 20x150 mm Square Alu finish lacq. 9751620007
D162 PZ 55 mm 20x150 mm Square Stainless steel 9751620000
D162 PZ 65 mm 20x150 mm Rounded Stainless steel 9751620013
D162 BATH/WC 55 mm 20x150 mm Rounded Stainless steel 9751620004
D162 BATH/WC 55 mm 20x150 mm Square Stainless steel 9751620003
D162 BB 55 mm 20x150 mm Rounded Stainless steel 9751620010
D162 BB 55 mm 20x150 mm Square Alu finish lacq. 9751620014
D162 BB 65 mm 20x150 mm Rounded Stainless steel 9751620011
Version A B C D E F G
PZ 45, 55, 65 87 32 62,5 150 11 128
BB 55, 65 95 32 62,5 150 11 128
BB S 55 95 32 62,5 150 11 128
BATH 55 95 32 62,5 150 11 128
32
D166.PZW/BATH Mortise sliding door lock with hook bolt.
• To take profile cylinder/for bath.• Backset 55 mm.• Distance 55 mm.• Frontplate alu finish lacquered
or stainless steel.• Hook bolt zinc plated.• Non-handed.• Lock case zinc plated.• Including strike plate.
D166
Type Backset Front plate Shape Finish Article nr.
D166 PZW 55 mm 20x180 mm Rounded Alu finish lacq. 9751660005
D166 PZW 55 mm 20x180 mm Rounded Stainless steel 9751660006
D166 PZW 55 mm 20x180 mm Square Alu finish lacq. 9751660001
D166 PZW 55 mm 20x205 mm Rounded Alu finish lacq. 9751660008
D166 BATH/WC 55 mm 20x180 mm Rounded Stainless steel 9751660007
Version A B C D E F G
PZW 55 58 180 47 154 32 62
BATH/WC 55 58 180 47 154 32 62
33
D167.PZ Mortise sliding door lockwith pull handle.
• To take profile cylinder.• Backset 55 mm.• Front plate stainless steel.• Hook bolt polished nickel-plated.• Non-handed.• Including strike plate.
D167
Type Backset Front plate Shape Finish Article nr.
D167 BBS 55 mm 20x270 mm Rounded stainless steel 9751670003
D167 PZ 55 mm 20x270 mm Rounded Stainless steel 9751670007
Version A B C D E F
BBS 55 101 52,5 86,2 270 15
PZ 55 101 52,5 86,2 270 15
34
D171.PZ Roller bolt lock with dead bolt.
• To take profile cylinder.• Backset 55 und 60 mm.• Frontplate alu finish lacquered
or stainless steel.• Rollfalle verstellbar aus Messing• Dead bolt nickle plated.• Non-handed.• Lock case zinc plated.• Including strike plate.
D171
Type Backset Front plate Shape Finish Article nr.
D171 55 mm 24x235 mm Square Alu finish lack. 9751710000
D171 60 mm 20x235 mm Rounded Stainless steel 9751710001
Version A B C D E F G
PZ 55, 60 20 17 47 51,5 30 170
Adjustable from 5 to C
Adju
stin
g sc
rew
Adju
stin
g sc
rew
35
340 Serie.Mortise locks.
• Avaible as bath/WC- and sash lock.• PC-version to take profile cylinder.• Backset 50 und 60 mm.• Distance 72 mm (BATH/WC 78 mm).• Follower 8 mm.• Front plate stainless steel.• Latch and dead bolt steel zinc plated.• Non-handed.• Lock case steel, in- and outside grey lacquered.• Including strike plate.
340
Type Backset Front plate Shape Article nr.
344/33 50 mm 20x235 mm Rounded 9034433021
344/35 50 mm 20x235 mm Rounded 9034435021
344/36 50 mm 20x235 mm Square 9034436021
344/33 60 mm 24x235 mm Rounded 9034433031
344/35 60 mm 24x235 mm Rounded 9034435021
344/36 60 mm 24x235 mm Square 9034436031
345/33 50 mm 20x235 mm Rounded 9034533021
345/35 50 mm 24x235 mm Rounded 9034535021
345/36 50 mm 24x235 mm Square 9034536021
345/35 60 mm 24x235 mm Rounded 9034535031
348/33 50 mm 20x235 mm Rounded 9034833020
348/33 60 mm 20x235 mm Rounded 9034833030
348/36 60 mm 24x235 mm Square 9034836030
349/33 50 mm 20x235 mm Rounded 9034933021
349/35 50 mm 24x235 mm Rounded 9034935021
349/36 50 mm 24x235 mm Square 9034936021
349/33 60 mm 20x235 mm Rounded 9034933031
349/35 60 mm 24x235 mm Rounded 9034935031
349/36 60 mm 24x235 mm Square 9034936031
36
6100 Serie.Project locks.
• Available as - Bath/WC lock 6104. - Panic lock with splitted spindle 6102. - Sash lock 6109. - Night latch with hold back function 6107. - Latch 6105. - Dead lock 6108.
• PC-version to take profile cylinder.• Provided for profile cylinder and oval cylinder.• Backset 60 mm.• Distance 72 mm (BATH/WC 78 mm).• Combination tension follower 8 mm.• Loose front plate stainless steel.• Latch and dead bolt metal nickle plated.• Latch reversible.• Lock case steel, in- and outside white lacquered. • As per EN12209.• Lock dimensions according tot
DIN 18251 class 3.• Including strike plate and mounting
instructions.
6100
Type Backset Front plate Shape Option Handing Article nr.
6102/17 60 mm 20x235 mm Square DIN LH fig. 1 9610217003
6102/17 60 mm 20x235 mm Square DIN RH fig. 2 9610217004
6102/17 60 mm 20x235 mm Square DIN LR fig. 3 9610217031
6102/17 60 mm 20x235 mm Square DIN RH fig. 4 9610217032
6104/17 60 mm 20x235 mm Square 9610417001
6105/17 60 mm 20x235 mm Square 9610517001
6106/17 60 mm 20x235 mm Square 9610617200
6106/17 60 mm 20x235 mm Square Auxilliary latch DIN LH 9610627201
6106/17 60 mm 20x235 mm Square Auxilliary latch DIN RH 9610627202
6107/17 60 mm 20x235 mm Square 9610717001
6107/17 60 mm 20x235 mm Square Auxilliary latch DIN LH 9610727201
6107/17 60 mm 20x235 mm Square Auxilliary latch DIN RH 9610727202
6108/17 60 mm 20x235 mm Square 9610817000
6109/17 60 mm 20x235 mm Square 9610917001
Article Specification Classification according to EN 12209
6100/17Steel forend with stainless steel decoration plate, width 20 mm, sintered latch
3 M 4 1 0 F 6 H C 3 0
3 M 4 1 0 F 2 B C 3 0
37
6600 Serie.Heavy duty project locks.
• Available as - Bath/WC lock 6642. - Sash lock 6602. - Latch 6632. - Dead lock 6622.
• PC-version to take profile cylinder.• Provided for profile cylinder.• Backset 60 mm.• Distance 72 mm (Bath/WC 78 mm).• Steel follower 8 mm.• Front plate stainless steel.• Latch and dead bolt die-cast nickle plated.• Latch reversible.• Lock case zinc-plated.• As per EN12209.• Including strike plate and screws.
6600
Article Specification Classification according to EN 12209
6600Steel or stainless steel forend, width 20 mm or 24 mm, zamak or sintered latch
3 M 4 1 0 F 6 H C 3 0
3 M 4 1 0 F 2 B C 3 0
Type Backset Front plate Shape Article nr.
6602/31 60 mm 20x235 mm Rounded 9660231001
6602/32 60 mm 20x235 mm Square 9660232001
6602/32 60 mm 24x235 mm Rounded 9660235001
6602/36 60 mm 24x235 mm Square 9660236001
6622/31 60 mm 20x235 mm Rounded 9662231000
6622/32 60 mm 20x235 mm Square 9662232000
6622/35 60 mm 24x235 mm Rounded 9662235000
6622/36 60 mm 24x235 mm Square 9662236000
6632/32 60 mm 20x235 mm Square 9663232001
6632/35 60 mm 24x235 mm Rounded 9663235001
6632/36 60 mm 24x235 mm Square 9663236001
6642/31 60 mm 20x235 mm Rounded 9664231001
6642/32 60 mm 20x235 mm Square 9664232811
6642/35 60 mm 24x235 mm Rounded 9664235001
6642/36 60 mm 24x235 mm Square 9664236001
38
D150.PZW Mortise glass door lock.
• To take profile cylinder.• Key action on latch bolt.• Backset 25, 30, 35, 40 and 45 mm.• Distance 72 mm.• Follower 8 mm.• Front plate alu finish lacquered.• Single throw dead bolt.• Latch and dead bolt zinc-plated.• Handed.• Lock case zinc-plated.• Without strike plate.
D150
Type Backset Follower Handing Article nr.
D150 25 mm 8 mm DIN LH 9751500008
D150 25 mm 8 mm DIN RH 9751500009
D150 30 mm 8 mm DIN LH 9751500005
D150 30 mm 8 mm DIN RH 9751500006
D150 35 mm 8 mm DIN LH 9751500002
D150 35 mm 8 mm DIN RH 9751500007
D150 40 mm 8 mm DIN LH 9751500004
D150 40 mm 8 mm DIN RH 9751500003
D150 45 mm 8 mm DIN LH 9751500001
D150 45 mm 8 mm DIN RH 9751500002
39
D301.Narrow style sash lock.
• To take profile cylinder.• Key action on latch bolt.• Backset 18, 20, 22, 25, 30, 35, 40 and 45 mm.• Distance 72 mm.• Follower 8 mm.• Front plate steel zinc-plated.• Single throw dead bolt.• Latch and dead bolt zinc die-cast.• Reversible latch bolt.• Lock case zinc-plated.• Without strike plate.
D301
Type Backset Follower Finish Bolts extended Article nr.
D301 18 mm 8 mm Zinc plated 9753010000
D301 20 mm 8 mm Zinc plated 9753010001
D301 20 mm 8 mm Stainless steel 9753010015
D301 22 mm 8 mm Zinc plated 9753010002
D301 22 mm 8 mm Zinc plated 5 mm 9753010011
D301 25 mm 8 mm Zinc plated 9753010004
D301 25 mm 8 mm Zinc plated 5 mm 9753010012
D301 25 mm 8 mm Stainless steel 9753010003
D301 30 mm 8 mm Zinc plated 9753010006
D301 30 mm 8 mm Zinc plated 5 mm 9753010022
D301 30 mm 8 mm Stainless steel 9753010005
D301 35 mm 8 mm Zinc plated 9753010007
D301 35 mm 8 mm Stainless steel 9753010021
D301 40 mm 8 mm Zinc plated 9753010009
D301 40 mm 8 mm Zinc plated 5 mm 9753010014
D301 40 mm 8 mm Stainless steel 9753010008
D301 45 mm 8 mm Zinc plated 9753010010
40
D305.PZW Mortise glass door lock.
• To take profile cylinder.• Backset 18, 20, 22, 25, 30, 35, and 40 mm.• Front plate square steel zinc-plated.• Single throw dead bolt.• Dead bolt zinc die-cast.• None handed.• Lock case zinc-plated.• Without strike plate.
D305
Type Backset Article nr.
D305 18 mm 9753050000
D305 20 mm 9753050001
D305 22 mm 9753050006
D305 25 mm 9753050002
D305 30 mm 9753050003
D305 35 mm 9753050004
D305 40 mm 9753050005
41
D307.Narrow style latch.
• Backset 18, 20, 25, 30, and 35 mm.• Follower 8 mm.• Front plate square steel zinc-plated.• Latch zinc die-cast.• Reversible latch bolt.• Lock case zinc-plated.• Without strike plate.
D307
Type Backset Follower Article nr.
D307 18 mm 8 mm 9753070003
D307 20 mm 8 mm 9753070002
D307 25 mm 8 mm 9753070000
D307 30 mm 8 mm 9753070001
D307 35 mm 8 mm 9753070005
42
4128.Narrow style security dead lock.
• To take profile cylinder.• Backset 25, 30, 35, 40 and 45 mm.• Front plate square stainless steel.• Dead bolt steel with security pins.• Single throw dead bolt.• SKG**• Non handed.• Lock case zinc-plated black lacquered. • Without strike plate (P 4228/17).
4128
Type Backset Article nr.
4128/18 25 mm 9412818250
4128/18 30 mm 9412818300
4128/18 35 mm 9412818350
4128/18 40 mm 9412818400
4128/18 45 mm 9412818450
43
4169.Narrow style security sash lock.
• To take profile cylinder.• Key action on latch bolt.• Backset 25, 30, 35, 40 and 45 mm.• Distance 92 mm.• Follower 8 mm.• Front plate square stainless steel.• Single throw dead bolt.• Latch steel nickle-plated.• Dead bolt steel nickel-plated with security pins.• SKG**• Non-handed.• Lock case zinc-plated black lacquered.• Without strike plate (P 9600/17).
4169
Type Backset Follower Article nr.
4169/18 25 mm 8 mm 9416918251
4169/18 30 mm 8 mm 9416918301
4169/18 35 mm 8 mm 9416918351
4169/18 40 mm 8 mm 9416918401
4169/18 45 mm 8 mm 9416918451
44
4185.Narrow style security pivot dead bolt lock.
• To take profile cylinder.• Key action on latch bolt.• Backset 30, 35, 40 and 45 mm.• Front plate square stainless steel.• Pivot dead bolt steel nickel-plated
with security pins.• SKG*• Non-handed.• Lock case zinc-plated black lacquered.• Without strike plate (P 1205H/17).
4185
Type Backset Article nr.
4185/18 30 mm 9418518300
4185/18 35 mm 9418518350
4185/18 40 mm 9418518400
4185/18 45 mm 9418518450
45
8691/14.Narrow style sash lock.
• To take profile cylinder.• Key action on latch bolt.• Backset 25, 30, 35 and 40 mm.• Distance 72 mm.• Follower 8 mm.• Front plate zinc-plated.• Single throw dead bolt.• Latch and dead bolt brass.• Handed.• Lock case zinc-plated.• Without strike plate (P8691/12).
8691
Type Backset Follower Handing Article nr.
8691/14 25 mm 8 mm DIN LH 9869114251
8691/14 25 mm 8 mm DIN RH 9869114252
8691/14 30 mm 8 mm DIN LH 9869114301
8691/14 30 mm 8 mm DIN RH 9869114302
8691/14 35 mm 8 mm DIN LH 9869114351
8691/14 35 mm 8 mm DIN RH 9869114352
8691/14 40 mm 8 mm DIN LH 9869114401
8691/14 40 mm 8 mm DIN RH 9869114402
46
8691/31.Narrow style sash lock.
• To take profile cylinder.• Key action on latch bolt.• Backset 40 mm.• Distance 72 mm.• Follower 9 mm.• Front plate zinc-plated.• Single throw dead bolt.• Latch and dead bolt steel zinc-plated.• Reversible latch bolt.• Lock case zinc-plated.• Without strike plate (P8691/12).
8691
Type Backset Follower Handing Article nr.
8691/31 40 mm 9 mm Non handed 9869131401
47
8741.Narrow style sash lock.
• To take profile cylinder.• Key action on latch bolt.• Backset 25, 30, 35 and 40 mm.• Distance 110 mm.• Follower 8 mm.• Front plate zinc-plated.• Single throw dead bolt.• Latch and dead bolt brass.• Handed.• Lock case zinc-plated.• Without strike plate.
8741
Type Backset Follower Handing Article nr.
8741/14 25 mm 8 mm DIN LH 9874114251
8741/14 25 mm 8 mm DIN RH 9874114252
8741/14 30 mm 8 mm DIN LH 9874114301
8741/14 30 mm 8 mm DIN RH 9874114302
8741/14 35 mm 8 mm DIN LH 9874114351
8741/14 35 mm 8 mm DIN RH 9874114352
8741/14 40 mm 8 mm DIN LH 9874114401
8741/14 40 mm 8 mm DIN RH 9874114402
48
8791.Narrow style sash lock.
• To take profile cylinder.• Key action on latch bolt.• Backset 25, 30, 35 and 40 mm.• Distance 92 mm.• Follower 8 mm.• Front plate zinc-plated.• Single throw dead bolt.• Latch and dead bolt brass.• Handed.• Lock case zinc-plated.• Without strike plate (P8691/12).
8691
Type Backset Follower Handing Article nr.
8791/14 25 mm 8 mm DIN LH 9879114251
8791/14 25 mm 8 mm DIN RH 9879114252
8791/14 30 mm 8 mm DIN LH 9879114301
8791/14 30 mm 8 mm DIN RH 9879114302
8791/14 35 mm 8 mm DIN LH 9879114351
8791/14 35 mm 8 mm DIN RH 9879114352
8791/14 40 mm 8 mm DIN LH 9879114401
8791/14 40 mm 8 mm DIN RH 9879114402
49
9600.Narrow style sash lock.
• To take profile cylinder.• Key action on latch bolt.• Backset 25, 30, 35, 40 and 45 mm.• Distance 92 mm.• Follower 8 and 9 mm.• Front plate stainless steel.• Single throw dead bolt.• Latch and dead bolt zinc die-cast
bright nickel-plated.• Reversible latch bolt.• Lock case zinc-plated.• Without strike plate (P9500/12 zinc-plated
or P9600/17 stainless steel).
Also available in fire-resistant version. MPA certified, having a 9 mm special follower.Dead bolt is one throw 17 mm. Backset 30, 35 and 40 mm.
9600
Type Backset Follower Bolts extended Fire resistend Article nr.
9601/07 25 mm 8 mm 9960107001
9601/07 25 mm 8 mm 5 mm 9960107011
9601/08 25 mm 9 mm 9960108001
9602/07 30 mm 8 mm 9960207001
9602/07 30 mm 8 mm 5 mm 9960207011
9602/08 30 mm 9 mm 9960208001
9602/08 30 mm 9 mm yes 9960208301
9603/07 35 mm 8 mm 9960307001
9603/07 35 mm 8 mm 5 mm 9960307011
9603/08 35 mm 9 mm 9960308001
9603/08 35 mm 9 mm yes 9960308301
9604/07 40 mm 8 mm 9960407001
9604/07 40 mm 8 mm 5 mm 9960407011
9604/08 40 mm 9 mm 9960408001
9604/08 40 mm 9 mm yes 9960408301
9605/07 45 mm 8 mm 9960507001
9605/08 45 mm 9 mm 9960508001
Classification no.
Article Specification Designation according to EN12209
Nemef 96xx/08 Narrow style lock with stainless steel front plate 24 mm and sintered steel latch
2 X 8 1 0 F 2 H A 3 0
Nemef 96xxall other types
Narrow style lock with stainless steel front plate 24 mm and zinc die-cast latch
2 X 8 0 0 F 2 H A 3 0
Certificate 9600
Standards: CE Marking, EN 12209
50
9620.Narrow style latch.
• Backset 25, 30, 35, 40 and 45 mm.• Follower 8 mm.• Front plate stainless steel.• Latch zinc die-cast bright nickel-plated.• Reversible latch bolt.• Lock case zinc-plated.• Without strike plate (P635/12 zinc-plated
or 635/17 stainless steel).
9620
Type Backset Follower Article nr.
9621/07 25 mm 8 mm 9962107001
9622/07 30 mm 8 mm 9962207001
9623/07 35 mm 8 mm 9962307001
9624/07 40 mm 8 mm 9962407001
9625/07 45 mm 8 mm 9962507001
Certificate 9600
Classification no.
Article Specification Designation according to EN12209
Nemef 96xx/08 Narrow style lock with stainless steel front plate 24 mm and sintered steel latch
2 X 8 1 0 F 2 H A 3 0
Nemef 96xxall other types
Narrow style lock with stainless steel front plate 24 mm and zinc die-cast latch
2 X 8 0 0 F 2 H A 3 0
Standards: CE Marking, EN 12209
51
9630.Narrow style night latch.
• To take profile cylinder.• Key action on latch bolt.• Backset 25, 30, 35, 40 and 45 mm.• Distance 92 mm.• Follower 8 mm.• Front plate stainless steel.• Latch bolt zinc die-cast bright nickel-plated.• Reversible latch bolt.• Lock case zinc-plated.• Without strike plate (P635/12 zinc-plated
or 635/17 stainless steel).
9630
Type Backset Follower Article nr.
9631/07 25 mm 8 mm 9963107001
9632/07 30 mm 8 mm 9963207001
9633/07 35 mm 8 mm 9963307001
9634/07 40 mm 8 mm 9963407001
9635/07 45 mm 8 mm 9963507001
Certificate 9600
Classification no.
Article Specification Designation according to EN12209
Nemef 96xx/08 Narrow style lock with stainless steel front plate 24 mm and sintered steel latch
2 X 8 1 0 F 2 H A 3 0
Nemef 96xxall other types
Narrow style lock with stainless steel front plate 24 mm and zinc die-cast latch
2 X 8 0 0 F 2 H A 3 0
Standards: CE Marking, EN 12209
52
9640.Narrow style dead lock (small case).
• To take profile cylinder.• Backset 25, 30, 35, 40 and 45 mm.• Front plate stainless steel.• Single throw dead bolt.• Dead bolt zinc die-cast bright nickel-plated.• Non-handed.• Lock case zinc-plated.• Without strike plate (P636/12 zinc-plated
or P636/17 stainless steel).
9640
Type Backset Article nr.
9641/07 25 mm 9964107000
9642/07 30 mm 9964207000
9643/07 35 mm 9964307000
9644/07 40 mm 9964407000
9645/07 45 mm 9964507000
Certificate 9600
Classification no.
Article Specification Designation according to EN12209
Nemef 96xx/08 Narrow style lock with stainless steel front plate 24 mm and sintered steel latch
2 X 8 1 0 F 2 H A 3 0
Nemef 96xxall other types
Narrow style lock with stainless steel front plate 24 mm and zinc die-cast latch
2 X 8 0 0 F 2 H A 3 0
Standards: CE Marking, EN 12209
53
9650.Narrow style dead lock (large case).
• To take profile cylinder.• Backset 25, 30, 35, 40 and 45 mm.• Front plate stainless steel.• Dead bolt die-cast bright nickel-plated
with security pin.• Non-handed.• Lock case zinc-plated.• Without strike plate (P636/12 zinc-plated
or P636/17 stainless steel).
9650
Type Backset Article nr.
9651/07 25 mm 9965107000
9652/07 30 mm 9965207000
9653/07 35 mm 9965307000
9654/07 40 mm 9965407000
9655/07 45 mm 9965507000
Certificate 9600
Classification no.
Article Specification Designation according to EN12209
Nemef 96xx/08 Narrow style lock with stainless steel front plate 24 mm and sintered steel latch
2 X 8 1 0 F 2 H A 3 0
Nemef 96xxall other types
Narrow style lock with stainless steel front plate 24 mm and zinc die-cast latch
2 X 8 0 0 F 2 H A 3 0
Standards: CE Marking, EN 12209
54
9660.Narrow style pivot dead bolt lock.
• To take profile cylinder.• Backset 30, 35, 40 and 45 mm.• Front plate stainless steel.• Single throw dead bolt.• Pivot dead bolt steel zinc-plated.• Non-handed.• Lock case zinc-plated.• Without strike plate (P1205H/17l).
9660
Type Backset Article nr.
9662/07 30 mm 9966207000
9663/07 35 mm 9966307000
9664/07 40 mm 9966407000
9665/07 45 mm 9966507000
Certificate 9600
Classification no.
Article Specification Designation according to EN12209
Nemef 96xx/08 Narrow style lock with stainless steel front plate 24 mm and sintered steel latch
2 X 8 1 0 F 2 H A 3 0
Nemef 96xxall other types
Narrow style lock with stainless steel front plate 24 mm and zinc die-cast latch
2 X 8 0 0 F 2 H A 3 0
Standards: CE Marking, EN 12209
55
9670.Narrow style panic lock.
• To take profile cylinder.• Key action on latch bolt.• Backset 30, 35, 40 and 45 mm.• Distance 92 mm.• With one-piece follower 8 and 9 mm.• With two-piece follower 8 and 9 mm. (=handed).• Front plate stainless steel.• Single throw dead bolt.• Latch and dead bolt zinc die-cast
bright nickel-plated.• Reversible latch bolt.• Lock case zinc-plated.• Without strike plate (P9500/12 zinc-plated
or P9600/17 stainless steel).• Locks having 9 mm follower are fire-resistant,
MPA certified.
9670
Type Backset Follower Handing Article nr.
9672/07 30 mm 8 mm bolt through 9967207001
9672/07 30 mm 8 mm splitted DIN LH 9967207201
9672/07 30 mm 8 mm splitted DIN RH 9967207202
9672/08 30 mm 9 mm bolt through 9967208001
9672/08 30 mm 9 mm splitted DIN LH 9967208201
9672/08 30 mm 9 mm splitted DIN RH 9967208202
9673/07 35 mm 8 mm bolt through 9967307001
9673/07 35 mm 8 mm splitted DIN LH 9967307201
9673/07 35 mm 8 mm splitted DIN RH 9967307202
9673/08 35 mm 9 mm bolt through 9967308001
9673/08 35 mm 9 mm splitted DIN LH 9967308201
9673/08 35 mm 9 mm splitted DIN RH 9967308202
9674/07 40 mm 8 mm bolt through 9967407001
9674/07 40 mm 8 mm splitted DIN LH 9967407201
9674/07 40 mm 8 mm splitted DIN RH 9967407202
9674/08 40 mm 9 mm bolt through 9967408001
9674/08 40 mm 9 mm splitted DIN LH 9967408201
9674/08 40 mm 9 mm splitted DIN RH 9967408202
9675/07 45 mm 8 mm bolt through 9967507001
9675/07 45 mm 8 mm splitted DIN LH 9967507201
9675/07 45 mm 8 mm splitted DIN RH 9967507202
9675/08 45 mm 9 mm bolt through 9967508001
9675/08 45 mm 9 mm splitted DIN LH 9967508201
9675/08 45 mm 9 mm splitted DIN RH 9967508202
Certificate 9600
Classification no.
Article Specification Designation according to EN12209
Nemef 96xx/08 Narrow style lock with stainless steel front plate 24 mm and sintered steel latch
2 X 8 1 0 F 2 H A 3 0
Nemef 96xxall other types
Narrow style lock with stainless steel front plate 24 mm and zinc die-cast latch
2 X 8 0 0 F 2 H A 3 0
Standards: CE marking, EN 12209 and EN 179
56
9680.Narrow style roller bolt lock.
• To take profile cylinder.• Key action on roller bolt.• Backset 25, 30, 35, 40 and 45 mm.• Front plate stainless steel.• Single throw dead bolt.• Adjustable roller bolt brass nickel-plated.• Dead bolt die-cast bright nickle-plated.• Non-handed.• Lock case zinc-plated.• Without strike plate
9680
Type Backset Article nr.
9681/07 25 mm 9968107000
9682/07 30 mm 9968207000
9683/07 35 mm 9968307000
9684/07 40 mm 9968407000
9685/07 45 mm 9968507000
Certificate 9600
Classification no.
Article Specification Designation according to EN12209
Nemef 96xx/08 Narrow style lock with stainless steel front plate 24 mm and sintered steel latch
2 X 8 1 0 F 2 H A 3 0
Nemef 96xxall other types
Narrow style lock with stainless steel front plate 24 mm and zinc die-cast latch
2 X 8 0 0 F 2 H A 3 0
Standards: CE Marking, EN 12209
57
9690.Narrow style pivot hook bolt lock.
• To take profile cylinder.• Key action on hook bolt.• Backset 30, 35, 40 and 45 mm.• Front plate stainless steel.• Single throw hook bolt.• Hook bolt steel zinc-plated • With/without security pin.• Extra security pin which makes it
impossible to lift the door.• Non-handed.• Lock case zinc-plated.• Without strike plate (P1205H/17).
9690
Type Backset Security pin Article nr.
9692/07 30 mm With 9969207000
9692/07 30 mm Without 9969207100
9693/07 35 mm With 9969307000
9693/07 35 mm Without 9969307100
9694/07 40 mm With 9969407000
9694/07 40 mm Without 9969407100
9695/07 45 mm With 9969507000
9695/07 45 mm Without 9969507100
Certificate 9600
Classification no.
Article Specification Designation according to EN12209
Nemef 96xx/08 Narrow style lock with stainless steel front plate 24 mm and sintered steel latch
2 X 8 1 0 F 2 H A 3 0
Nemef 96xxall other types
Narrow style lock with stainless steel front plate 24 mm and zinc die-cast latch
2 X 8 0 0 F 2 H A 3 0
Standards: CE Marking, EN 12209
58
Strike plates.
Type Shape Finish Handing Article nr.
D001 Rounded Alu finish lacq. DIN LH 9750019004
D001 Rounded Alu finish lacq. DIN RH 9750019005
D001 Square Alu finish lacq. DIN LH 9750019006
D001 Square Alu finish lacq. DIN RH 9750019007
D001 Rounded Stainless steel DIN LH 9750019002
D001 Rounded Stainless steel DIN RH 9750019003
D001 Square Stainless steel DIN LH 9750019000
D001 Square Stainless steel DIN RH 9750019001
D032 Square Alu finish lacq. 7-7-7 9750329002
D032 Square Alu finish lacq. 10-12-10 9750329004
D032 Square Stainless steel 10-12-10 9750329003 D001
D032
Hole template 7-7-7
D032
Hole template 10-12-10
for countersunk wood screw
3.5 DIN
97
for countersunk wood screw
3.5 DIN
97
for c
ount
ersu
nk w
ood
scre
w 3
.5 D
IN 9
7
thic
k
p lastic lining
plastic lining
Strike plates.
59
P6602 (rounded and square)
P6632 (rounded and square)
Type Shape Finish Article nr.
P 6109/17 Square Stainless steel 9610990170
P 6602/17 Rounded Stainless steel 9660290175
P 6602/17 Square Stainless steel 9660290170
P 6622/12 Rounded Steel zinc-plated 9662290125
P 6622/17 Rounded Stainless steel 9662290175
P 6632/12 Rounded Steel zinc-plated 9663290125
P6109 (square)
P6622 (rounded and square)
60
Strike plates.
P7000 and HP7000 (rounded and square)
Fitting D140, D141, D147, D196, D197, D540 and D541
P7002 and P7003 (rounded and square)
Type Shape Finish Handing Article nr.
P 7000/17 Rounded Stainless steel Non-handed 9700090175
P 7000/17 Rounded Stainless steel DIN LH 9700090176
P 7000/17 Rounded Stainless steel DIN RH 9700090177
P 7000/17 Square Stainless steel DIN LH 9700090171
P 7000/17 Square Stainless steel DIN RH 9700090172
HP 7000/17 Rounded Stainless steel Non-handed 9700090275
HP 7000/17 Rounded Stainless steel DIN LH 9700090276
HP 7000/17 Rounded Stainless steel DIN RH 9700090277
P 7002/17 Rounded Stainless steel Non-handed 9700090175
P 7002/17 Square Stainless steel Non-handed 9700090170
P 7003/17 Rounded Stainless steel Non-handed 9700390175
P 7003/17 Square Stainless steel Non-handed 9700390170
P 7200/17 Rounded Stainless steel DIN LH 9720090176
P 7200/17 Rounded Stainless steel DIN RH 9720090177
P 7200/17 Square Stainless steel DIN LH 9720090171
P 7200/17 Square Stainless steel DIN RH 9720090172 P7200 (rounded and square)
61
Strike plates.
Art. P 635/12 or P 635/17
Strike plates for 9620 and 9630 Series
Art. P 636/12 or P 636/17
Strike plates for 9640 and 9650 Series
Art. P 1205H/17
Strike plates for 9660 and 9690 Series
Art. P 8691/12
Strike plates for 8600 Series
62
Art. P 9500/12
Strike plates for 9600 and 9670 Series
P 9600/17
Strike plates for 9600 and 9670 Series
ASSA ABLOY is theglobal leader in door pening solutions, dedicated to satisfyingend-user needs for security,safety and convenience
9999990377 / JTP - 02/2016
ASSA ABLOY Nederland B.V.P.O. Box 13, 7300 AATweelingenlaan 487324 AN ApeldoornThe Netherlands
Tel. +31 88 639 48 00Fax +31 88 639 49 [email protected]