NCSX
Initial Results from Friction Material Testing
January 29, 2007
NCSX
January 29,2007 2
NCSX
Testing Setup
• A traditional tension/compression testing machine has been configure to pull “double shear” combinations.
• Side rams allow the application of normal (transverse) loads
January 29,2007 3
NCSX
Typical Test Combination
• A 0.38” thick x 1.00” wide center element receives the application of friction-encouraging medium (if any)
• Wider (1.50”) side plates are added to each side of the center element with an axial overlap of 1.0”
• The normal/transverse load (10 kip max) is added at the center of the overlap areas (2 in**2 total area)
January 29,2007 4
NCSXTest Observations
• File 070129Summary.xls lists the outcomes of 21 trials– G-10 on SS (ambient,1 trial) m=0.18– SS on SS (amb/cold, 4 trials) m=0.21-0.26– SS/diamond/SS (amb/cold, 16 trials) mavg=0.53
• Many combinations
• The fundamental failure in the diamond-assisted trials was the tearing of the seated diamonds along/through the surface of the stainless– The tear-outs look like aerial views of perfectly plowed fields– This may be the functional limit of the material
January 29,2007 5
NCSXDesirability/Negatives
• The machine assembly personnel will probably find the 100/120 grit diamond (6 mil) on each side of the final shims to be the easiest to cope with during precision assembly.
• The 0.004 shim stock with diamond approach would allow last-minute changes in shim thicknesses – No lag time for off-site processing after shims are sized
– Assembly personnel would have bigger uncertainties with 4x12mil vs. 2x6mil when getting things “in tolerance”
• The nickel-bound diamond show NO degradation after failure– Relative mag perm 1.7<mrel<1.9
– Good cycle test candidate?
January 29,2007 6
NCSXNext Steps
• EKAgrip-Ceradyne (plant in Germany, US office in Michigan) is applying diamond to 0.004 SS shim as a parallel test to complement our current Braziler-supplier shims.
• NCSX will pick a relevant pressure range and produce a plot (pressure vs. m) for one or two selected front runners.
• Stellaloy – will the manganese improve things?• Cycle testing at 80K