5
Specifications andstandardsThe separable connector 158LRmeets the requirements ofCENELEC HD 629.1.
Up to 24 kV - 250 A
DesignSeparable connectorcomprising:1. Conductive EPDM insert.2. Conductive EPDM jacket.3. Insulating EPDM layer
moulded between the insertand the jacket.
4. Type A - 250 A interfaceas described by CENELECEN 50180 and 50181.
5. Conductor connector.6. Earthing lead
(-/G version only).
158LRINTERFACE A
ELBOW CONNECTOR
ApplicationSeparable elbow connectordesigned to connect polymericinsulated cable to equipment(transformers, switch gear,motors...).Also connects cable to cable,using the appropriate matingpart.
6/10 (12) kV6.35/11 (12) kV8.7/15 (17.5) kV
12/20 (24) kV12.7/22 (24) kV
Technical characteristics• The thick conductive EPDM
jacket provides a total safe totouch screen which ensuressafety for personnel.
• Each separable connector istested for AC withstand andpartial discharge prior toleaving the factory.
1
3
221 mm
160 mm
2
4
5
6
Separableconnector
type
VoltageUm(kV)
CurrentIr
(A)
Conductor sizes (mm2)(for information only)
min. max.158LR/G
158LRK158LR/G
K158LR
12122424
250250250250
16701625
70952595
6
Kit contentsThe complete (K)158LR or(K)158LR/G elbow connectorkit comprises the followingcomponents:
The kit also comprises lubricant, wipers,installation instructions and crimp chart.
Ordering instructionsSelect the part numberwhich gives the best centringto the cable core insulationdiameter and substitute Xusing table X, according to theconductor size and type.Add a 'K' for use up to 24 kV.
Orderingpart number
Dia. over core insulation (mm)
min. max.
158LR/G-11-X158LR/G-13-X
158LR-FG-X+11TL158LR-GA-X+11TL158LR-GAB-X+11TL158LR-GH-X+11TL
12.614.618.419.721.023.2
16.118.721.222.523.826.4
Example:The copper wire screened cableis 24 kV, 50 mm2 strandedaluminium with a diameter overcore insulation of 20.4 mm.Order a K158LR-FG-50(K)M-12-2+11TL elbow connector kit.
Conductorsizes
(mm²)
Aluminium Copper
DIN hexagonal Deep indent DIN hexagonal
162535507095
-25(K)M-12-235(K)M-12-250(K)M-12-270(K)M-12-295(K)M-12-2
-25KM-12-135KM-12-1
50(K)M-12-170(K)M-12-195(K)M-12-1
16(K)M-11-225(K)M-11-235(K)M-11-250(K)M-11-270(K)M-11-295(K)M-11-2
Table X
+ + +
Conductorcontact
164LRC-X
Pin contact+ hex key
154LRF
Bailrestraint
150BA-B1Connector housing
(K)158BLR-W
+ (K)158LR-W-X+11TLconnector kit for
larger sizes
=
Cable adaptor11TL
Connector housing(K)158BLR/G-W
Cable reducer211CA
= (K)158LR/G-W-Xconnector kit for
smaller sizes
+
Table W
For adaptedbail restraints:
see 'Bail restraints andtypical applications'.
For outdoorapplications.
Order: +MWS.
Components can beordered individually.
For use withcopper tape
screened cables.Order: Kit MT.
For use with Alupe orC 33-226 cables.
Please contact ourrepresentative.
For use withother cable types.
Please contact ourrepresentative.
