-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 1, total 68 pages
Copyright Huawei Technologies Co., Ltd. 2014. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means
without prior written consent of Huawei Technologies Co., Ltd.
Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their
respective holders.
Notice
The purchased products, services and features are stipulated by the contract made between
Huawei and the customer. All or part of the products, services and features described in this
document may not be within the purchase scope or the usage scope. Unless otherwise
specified in the contract, all statements, information, and recommendations in this document
are provided "AS IS" without warranties, guarantees or representations of any kind, either
express or implied.
The information in this document is subject to change without notice. Every effort has been
made in the preparation of this document to ensure accuracy of the contents, but all
statements, information, and recommendations in this document do not constitute a warranty
of any kind, express or implied.
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 2, total 68 pages
HLR Subscriber Data in Huawei Standard
Format
1 Basic Subscription
1.1 HLR_INDEX
Format: HLR_INDEX=
Description: a string, with a single value. Value range: 0255.
1.2 IMSI
Format: IMSI=
Description: a string which contains 5 to 16 digits, in a format similar to
TBCD format.
1.3 MSISDN
Format: MSISDN=
Description: a string which contains up to 16 digits, in a format similar to
TBCD format.
1.4 SID
Format: SID=
Description: a string which contains 16 hexadecimal digits.
1.5 IMEISV (Dynamic)
Format: IMEISV=
Description: a string which contains up to 16 digits, in a format similar to
TBCD format.
1.6 CCNDC
Format: CCNDC=
Description: a string of 3 to 5 digits. If MSISDN contains the string, the
parameter can be omitted.
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 3, total 68 pages
1.7 CURRENTNAM
Format: CURRENTNAM=
Description: Network access mode of the user, a string, with a single value. Value range:
BOTH /*both MSC and SGSN*/
NONGPRS /*only MSC*/
GPRS /*only SGSN*/
1.8 CAT
Format: CAT=
Description: a string, with a single value. Value range:
UNKNOWN /*unidentified type*/
FRENCH /*sort by user language*/
ENGLISH
GERMAN
RUSSIAN
SPANISH
SPECIAL1
SPECIAL2
SPECIAL3
RESERVE
COMMON /*common user*/
SUPERIOR /*super user*/
DATACALL /*data call*/
TESTCALL /*test call*/
SPARE
PAYPHONE
COIN;
1.9 LOCK
Format: LOCK=
Description: a string, with multiple values. Value range:
LOCKIN: Barring incoming calls of the user
LOCKOUT: Barring outgoing calls of the user
SABOUT: The user applies for barring outgoing calls actively
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 4, total 68 pages
SABIN: The user applies for barring incoming calls actively
SGSNLOCK: User PS domain barring (restricting user PS domain roaming)
EPSLOCK: User EPS domain barring (restricting user EPS domain roaming)
NON3GPPLOCK: User Non-3GPP domain barring (restricting user Non-3GPP
domain roaming)
1.10 UPLCSLCK
Format: UPLCSLCK=
Description: a string, with a single value. Value:
YES: Deny location updates for CS domain
NO: Allow location updates for CS domain
1.11 UPLPSLCK
Format: UPLPSLCK=
Description: a string, with a single value. Value:
YES: Deny location updates for PS domain
NO: Allow location updates for PS domain
1.12 TBS
Format: TBS=
Description: Basic service (including telecom services and bearer services) string, with
multiple values. Value range:
/*telecom service*/
TS11: telephony
TS12: emergencyCalls
TS21: shortMessageMT_PP
TS22: shortMessageMO_PP
TS61: facsimileGroup3AndAlterSpeech
TS62: automaticFacsimileGroup3
TS63: facsimileGroup4
ALLPLMNTS: allPLMN_SpecificTS
PLMNTS1: plmn_specficTS_1
PLMNTS2: plmn_specficTS_2
PLMNTS3: plmn_specficTS_3
PLMNTS4: plmn_specficTS_4
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 5, total 68 pages
PLMNTS5: plmn_specficTS_5
PLMNTS6: plmn_specficTS_6
PLMNTS7: plmn_specficTS_7
PLMNTS8: plmn_specficTS_8
PLMNTS9: plmn_specficTS_9
PLMNTSA: plmn_specficTS_A
PLMNTSB: plmn_specficTS_B
PLMNTSC: plmn_specficTS_C
PLMNTSD: plmn_specficTS_D
PLMNTSE: plmn_specficTS_E
PLMNTSF: plmn_specficTS_F
/*bearer service*/
BS21: dataCDA_300bps
BS22: dataCDA_1200bps
BS23: dataCDA_1200_75bps
BS24: dataCDA_2400bps
BS25: dataCDA_4800bps
BS26: dataCDA_9600bps
BS2F: FALL-BACK ASYNCHRONOUS BEARER SERVICE
BS2G: general_dataCDA
BS31: dataCDS_1200bps
BS32: dataCDS_2400bps
BS33: dataCDS_4800bps
BS34: dataCDS_9600bps
BS3F: FALL-BACK SYNCHRONOUS BEARER SERVICE
BS3G: general_dataCDS
BS40: allPadAccessCA_Services
BS41: padAccessCA_300bps
BS42: padAccessCA_1200bps
BS43: padAccessCA_1200_75bps
BS44: padAccessCA_2400bps
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 6, total 68 pages
BS45: padAccessCA_4800bps
BS46: padAccessCA_9600bps
BS50: allDataPDS_Services
BS51: dataPDS_2400bps
BS52: dataPDS_4800bps
BS53: dataPDS_4800bps
BS61: allAlternateSpeech_DataCDA
BS62: allAlternateSpeech_DataCDS
BS81: allSpeechFollowedByDataCDA
BS82: allSpeechFollowedByDataCDS
1.13 ODBIC
Format: ODBIC=
Description: Incoming call barring decided by the operator, a string, with a single value.
Value range:
BAIC: barring of all incoming call
BICROAM: barring of incoming calls when roaming outside home PLMN country
NONE: (default) no barring
1.14 ODBOC
Format: ODBOC=
Description: Outgoing call barring decided by the operator, a string, with a single value.
Value range:
BAOC: barring of all outgoing calls
BOIC: barring of outgoing international calls
BOICEXHC: barring of outgoing international call s except those direct to the
home PLMN
BOCROAM: OdbOutgoingCallsWhenRoaming
NONE: (default) no barring
1.15 ODBROAM
Format: ODBROAM=
Description: Roaming barring service decided by the operator, a string, with a single
value. Value range:
ODBOH: baring of roaming when the user roams outside the home PLMN
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 7, total 68 pages
ODBOHC: barring of roaming when the user roams outside the home PLMN
country
BROHPLMNCGPRS: baring of GPRS when the user roams outside the home
PLMN country
NONE: (default) no barring
1.16 ODBPRC
Format: ODBPRC=
Description: barring high-rate entertainment and information calls decided by the
operator, in a single column, with multiple values. Value range:
ENTER: barring of entertainment calls
INFO: barring of information calls
NONE: (default) no barring
1.17 ODBPLMN
Format: ODBPLMN=
Description: a string, in a single column, with multiple values. Value range: PLMN1,
PLMN2, PLMN3, PLMN4, NONE (default).
1.18 ODBPOS
Format: ODBPOS=-
Description: a string, with a single value, multiple columns, with multiple values. Value
range:
Column 1: value range: NOBPOS, BAPOS, BHPLMNAPROAM,
BALLAPROAM;
Column 2: value range: BOTH, MS, NET
1.19 OBRF
Format: OBRF=
Description: a string, with a single value. Value range:
OBRFALL, OBRFIN, OBRFINEXH, OBRFZ, OBRFZEXH
1.20 ODBECT
Format: ODBECT=
Description: a string, with a single value. Value range:
ODBAECT: OdbAllECT
ODBCECT: OdbChargeableECT
ODBIECT: OdbInternationalECT
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 8, total 68 pages
ODBZECT: OdbInterzonalECT
1.21 ODBDECT
Format: ODBDECT=
Description: a string, with a single value. Value: YES, NO
1.22 ODBMECT
Format: ODBMECT=
Description: a string, with a single value. Value: YES, NO
1.23 ODBPREMSMS
Format: ODBPREMSMS=
Description: whether to bar the PREMSMS, Value: YES, NO
1.24 ODBADULTSMS
Format: ODBADULTSMS=
Description: whether to bar the ADULSMS, Value: YES, NO
1.25 SUBRES
Format: SUBRES=
Description: Restriction type, a string, with a single value. Value range:
ALLPLMN: All_GSM_PLMNS
ONEAFPLMN: OneNationalAndAllForeign_GSM_PLMNS
HPLMN: RegionallyRestricted
RRTEMPLATE: Regional Roaming from RRTPL
Default value: ONEAFPLMN
1.26 VLRLIST
Format: VLRLIST=
Description: A numerical string, with a single value, representing VLR roaming
restriction template
1.27 SGSNLIST
Format: SGSNLIST=
Description: A numerical string, with a single value, representing SGSN roaming
restriction template
1.28 VLR (Dynamic)
Format: VLR=
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 9, total 68 pages
Description: VLR number where the user is roaming, a numerical string consisting of
115 digits, with a single value
1.29 MSC (Dynamic)
Format: MSC=
Description: MSC number where the user is roaming, a numerical string consisting of
115 digits, with a single value
1.30 SGSN (Dynamic)
Format: SGSN=
Description: SGSN number where the user is roaming, a numerical string consisting of
115 digits, with a single value.
1.31 MTRF (Dynamic)
Format: MTRF=
Description: whether to support the MTRF, Value: YES, NO
1.32 IMSSF_NUM (Dynamic)
Format: IMSSF_NUM=
Description: GT address of IMSSF, a numerical string consisting of 115 digits, with a single value
1.33 VOLTESTATE (Dynamic)
Format: VOLTESTATE=---
Description: with a single value, multiple columns
Column 1: MME capability, value:
1: Yes
0: No
Column 2: S4SGSN capability, value:
1: Yes
0: No
Column 3: RVCC capability, value:
1: Yes
0: No
Column 4: IMS registration, value:
1: Yes
0: No
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 10, total 68
pages
1.34 IP_SM_GW_ADD (Dynamic)
Format: IP_SM_GW_ADD=
Description: IP-SM-GW address, a numerical string consisting of 115 digits, with a single value.
1.35 UNRI (Dynamic)
Format: UNRI=
Description: UE not reachable for IP. Value: YES, NO
1.36 UNRR (Dynamic)
Format: UNRR=
Description: Reason why UE is not reachable for IP. Value range: 112 and 100
0: no_paging_response_via_the_MSC
1: IMSI_detached
2: roaming_restriction
3: deregistered_in_the_HLR_for_non_GPRS
4: MS_purged_for_non_GPRS
5: no_paging_response_via_the_SGSN
6: GPRS_detached
7: deregistered_in_the_HLR_for_GPRS
8: MS_purged_for_GPRS
9: Unidentified_subscriber_via_the_MSC
10: Unidentified_subscriber_via_the_SGSN
11: deregistered_in_the_HSS_HLR_for_IMS
12: no_response_via_the_IP_SM_GW
100: invalid
1.37 URRP_MME (Dynamic)
Format: URRP_MME=
Description: Whether the UE is reachable for IP on the MME. Value range:
REACHABLE, NOT_REACHABLE
1.38 URRP_SGSN (Dynamic)
Format: URRP_SGSN=
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 11, total 68 pages
Description: Whether the UE is reachable for IP on the SGSN. Value range:
REACHABLE, NOT_REACHABLE
1.39 ODBSS
Format: ODBSS=
Description: Barring of supplementary services decided by the operator, a string, with a
single value. Value:
YES: barring of the supplementary service of the user
NO: no barring
1.40 SMDP
Format: SMDP=
Description: short message deliver path, a string, with a single value. Value:
MSC: transfer short messages from the MSC preferentially
SGSN: transfer short messages from the SGSN preferentially
1.41 NAEA
Format: NAEA=
Description: access code of equal access, a string consisting of 4 hexadecimal digits,
with a single value
1.42 NLR
Format: NLR=
Description: number migration, with a single value. Value range:
GSM: The number is migrated only in the CS domain.
GPRS: The number is migrated only in the PS domain.
BOTH: The number is migrated in both domains.
1.43 VVDN
Format: VVDN=
Description: voice/video double number service, a string, with a single value. Value:
YES, NO
1.44 DEFCALL
Format: DEFCALL=
Description: default call (including telecom service and bearer service) string, with a
single value. Value range:
/*telecom service*/
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 12, total 68
pages
TS11: telephony
TS12: emergencyCalls
TS21: shortMessageMT_PP
TS22: shortMessageMO_PP
TS61: facsimileGroup3AndAlterSpeech
TS62: automaticFacsimileGroup3
TS63: facsimileGroup4
TSD1: AUXILIARY TELEPHONY
/*bearer service*/
BS21: dataCDA_300bps
BS22: dataCDA_1200bps
BS23: dataCDA_1200_75bps
BS24: dataCDA_2400bps
BS25: dataCDA_4800bps
BS26: dataCDA_9600bps
BS2F: FALL-BACK ASYNCHRONOUS BEARER SERVICE
BS2G: general_dataCDA
BS31: dataCDS_1200bps
BS32: dataCDS_2400bps
BS33: dataCDS_4800bps
BS34: dataCDS_9600bps
BS3F: FALL-BACK SYNCHRONOUS BEARER SERVICE
BS3G: general_dataCDS
BS41: padAccessCA_300bps
BS42: padAccessCA_1200bps
BS43: padAccessCA_1200_75bps
BS44: padAccessCA_2400bps
BS45: padAccessCA_4800bps
BS46: padAccessCA_9600bps
BS51: dataPDS_2400bps
BS52: dataPDS_4800bps
BS53: dataPDS_4800bps
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 13, total 68
pages
BS61: allAlternateSpeech_DataCDA
BS62: allAlternateSpeech_DataCDS
BS81: allSpeechFollowedByDataCDA
BS82: allSpeechFollowedByDataCDS
1.45 RBTINDEX
Format: RBTINDEX=
Description: CRBT selection code, with a single value. Value range: 0254
1.46 IST_ALERT_TIMER
Format: IST_ALERT_TIMER=
Description: IST alert timer, with a single value. Value range: 0255
1.47 IST_ALERT_RESPONSE
Format: IST_ALERT_RESPONSE=
Description: IST alert response, with a single value. Value range: 04
1.48 UPL_TIME (Dynamic)
Format: UPL_TIME=
Description: update location time for CS domain, with a single value. Value range:
09999999999
1.49 PURGE_TIME_ATMSC (Dynamic)
Format: PURGE_TIME_ATMSC=
Description: purge time for CS domain, with a single value. Value range: 09999999999
1.50 GPRSUPL_TIME (Dynamic)
Format: GPRSUPL_TIME=
Description: update location time for PS domain, with a single value. Value range:
09999999999
1.51 PURGE_TIME_ATSGSN (Dynamic)
Format: PURGE_TIME_ATSGSN=
Description: purge time for PS domain, with a single value. Value range: 09999999999
1.52 SUB_AGE
Format: SUB_AGE=
Description: service age indicator, with a single value. Value range: 016777215
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 14, total 68
pages
1.53 CATEGORYROUTE
Format: CATEGORYROUTE=
Description: route category, with a single value. Value range: 1255
1.54 ACR
Format: ACR=
Description: auto call redirect, with a single value. Value range: 0255
1.55 NRBT_INDEX
Format: NRBT_INDEX=
Description: NRBT index, with a single value. Value range: 165535
1.56 ACR_STATUS
Format: ACR_STATUS=
Description: ACR provision flag, with a single value. Value range: 02
1.57 STANDBY_IMSI
Format: STANDBY_IMSI=
Description: a string which contains 16 digits, in a format similar to TBCD.
1.58 EXPIRY_DATE
Format: EXPIRY_DATE=
Description: expiry Date, with a single value. Value range: 09999999999
1.59 MCSISTATE
Format: MCSISTATE=
Description: M_CSI state, a string, with a single value. Value: YES, NO
1.60 OCSISTATE
Format: OCSISTATE=
Description: O_CSI state, a string, with a single value. Value: YES, NO
1.61 TCSISTATE
Format: TCSISTATE=
Description: T_CSI state, a string, with a single value. Value: YES, NO
1.62 SMSROUTE(SMSROUTEdata template)
Format: SMSROUTE=
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 15, total 68
pages
Description: a numerical string, with a single value. Value range: 065534, SMSROUTE data template for subscription
1.63 EXEXROUTECATEGORY
Format: EXEXROUTECATEGORY=
Description: extended enhanced category service template, with a single value. Value
range: 12147483647
1.64 PROFILE_ID
Format: PROFILE_ID=
Description: subscription identifier, with a single value, a string which contains 3
decimal digits. Default value: 1
1.65 EPS_PROFILE_ID
Format: EPS_PROFILE_ID=
Description: subscription identifier, with a single value, a string which contains 3
decimal digits. Default value: 1
1.66 STNSR
Format: STNSR=
Description: Session Transfer Number for SRVCC. Value range: 315 decimal digits, with a single value
1.67 APNOI
Format: APNOI=
Description: APN operator identifier, with a single value. Value range: a string which
contains 163 digits
Default value#
1.68 TGPPAMBRMAXUL
Format: TGPPAMBRMAXUL=
Description: a numerical string, with a single value. Value range: 14294967295, user's maximum uplink bandwidth
1.69 TGPPAMBRMAXDL
Format: TGPPAMBRMAXDL=
Description: a numerical string, with a single value. Value range: 14294967295, user's maximum downlink bandwidth
1.70 RATFREQSELPRI
Format: RATFREQSELPRI=
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 16, total 68
pages
Description: a numerical string, with a single value. Value range: 1256, radio frequency selection priority
1.71 PLMNTPLID
Format: PLMNTPLID=
Description: PLMN roaming restriction template ID, with a single string. Value range:
065534
1.72 DIAMNODETPL_ID
Format: DIAMNODETPL_ID=
Description: 065534 Diameter roaming restriction template ID, with a single string. Value range: 065534
1.73 LTEAUTOPROV
Format: LTEAUTOPROV=
Description: Whether the HSS provides long term evolution (LTE) services
for a subscriber that has not been defined in the EPS.
Value:
TRUE: The HSS provides LTE services for a subscriber that has not been defined in the
EPS, and the HSS notifies the provisioning system of the LTE service provisioning.
FALSE: The HSS does not provide LTE services for a subscriber that has not been
defined in the EPS.
AUTOTPLUSER: The convergent HSS uses a template to provide LTE services for a
subscriber that has not been defined in the EPS.
AUTOUSER_NN: The HSS provides LTE services for a subscriber that has not been
defined in the EPS, but the HSS does not notify the provisioning system of the LTE
service provisioning.
AUTOTPLUSER_NN: The convergent HSS uses a template to provide LTE services for a
subscriber that has not been defined in the EPS, but the HSS does not notify the
provisioning system of the LTE service provisioning.
Default value: FALSE
1.74 MPS
Format: MPS=
Description: Specifies whether the HSS provides the Multimedia Priority Service (MPS)
for a subscriber.
Value:
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 17, total 68
pages
TRUE: The HSS provides the MPS for a subscriber.
FALSE: The HSS does not provide the MPS for a subscriber.
Default value: FALSE
1.75 TAUTIMER
Format: TAUTIMER=
Description: Specifies whether the HSS updates the routing areas or tracking areas for
subscribers. Value range: 043200.
The default value 0 indicates that the HSS does not update the routing areas and tracking
areas for subscribers. When the parameter value is changed from a non-zero value to 0, the
HSS sends a DSR message to the MME or S4SGSN.
143200 (in minutes): It indicates the interval at which the HSS updates the routing areas or tracking areas for subscribers.
1.76 SUB_DYN_EPS_ID (Dynamic)
Format: SUB_DYN_EPS_ID=
Description: EPS dynamic subscription identifier, with a single value, which consists of
3 digits.
1.77 MMEHOST (Dynamic)
Format: MMEHOST=
Description: MME host address, a string consisting of 1127 digits, with a single value.
1.78 MMEREALM (Dynamic)
Format: MMEREALM=
Description: MME real domain, a string consisting of 1127 digits, with a single value.
1.79 SGSNHOST (Dynamic)
Format: SGSNHOST=
Description: SGSN host name, a string consisting of 1127 digits, with a single value.
1.80 SGSNREALM (Dynamic)
Format: SGSNREALM=
Description: SGSN real domain, a string consisting of 1127 digits, with a single value.
1.81 S4SGSNNUM (Dynamic)
Format: S4SGSNNUM=
Description: S4SGSN number, a string consisting of 115 digits, with a single value.
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 18, total 68
pages
1.82 EPS_IMEI (Dynamic)
Format: EPS_IMEI=
Description: international mobile equipment identifier, a string consisting of 15digits.
1.83 EPS_IMEISV (Dynamic)
Format: EPS_IMEISV=
Description: a string consisting of 12 digits, in a format similar to TBCD.
1.84 MMEFEATURELIST (Dynamic)
Description: multiple columns Value range:
Format: MMEFEATURELIST=---
-----------
----
---
-----
For details about the enumerated values, see Feature-List AVP in section 7.3.10 of TS
29272.
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 19, total 68
pages
No. Feature M/
O
Description
0 ODB-all-APN O Operator Determined Barring of all Packet Oriented
Services
1 ODB-HPLMN-APN O Operator Determined Barring of Packet Oriented
Services from access points that are within the HPLMN whilst the subscriber is roaming in a VPLMN
2 ODB-VPLMN-APN O Operator Determined Barring of Packet Oriented
Services from access points that are within the roamed to VPLMN
3 ODB-all-OG Operator Determined Barring of all outgoing calls
4 ODB-all-InternationalOG O Operator Determined Barring of all outgoing
international calls
5 ODB-all-InternationalOGNotToHP
LMN-Country
O Operator Determined Barring of all outgoing
international calls except those directed to the home PLMN country
6 ODB-all-InterzonalOG O Operator Determined Barring of all outgoing inter-zonal
calls
7 ODB-all-InterzonalOGNotToHPL
MN-Country
O Operator Determined Barring of all outgoing inter-zonal
calls except those directed to the home PLMN country
8 ODB-all-InterzonalOGAndInternati
onalOGNotToHPLMN-Country
O Operator Determined Barring of all outgoing
international calls except those directed to the home
PLMN country and Barring of all outgoing inter-zonal calls
9 RegSub O Regional Subscription.
10 Trace O Trace Function
11 LCS-all-PrivExcep O All LCS Privacy Exception Classes
12 LCS-Universal O Allow location by any LCS client
13 LCS-CallSessionRelated O Allow location by any value added LCS client to which a call/session is established from the target UE
14 LCS-CallSessionUnrelated O Allow location by designated external value added LCS
clients
15 LCS-PLMNOperator O Allow location by designated PLMN operator LCS
clients
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 20, total 68
pages
16 LCS-ServiceType O Allow location by LCS clients of a designated LCS
service type
17 LCS-all-MOLR-SS O All Mobile Originating Location Request Classes
18 LCS-BasicSelfLocation O Allow an MS to request its own location
19 LCS-AutonomousSelfLocation O Allow an MS to perform self location without
interaction with the PLMN
20 LCS-TransferToThirdParty O Allow an MS to request transfer of its location to
another LCS client
21 SM-MO-PP O Short Message MO-PP
22 Barring-OutgoingCalls O Barring of Outgoing Calls
23 BAOC O Barring of all outgoing calls
24 BOIC O Barring of outgoing international calls
25 BOICExHC O Barring of outgoing international calls except those
directed to the home PLMN Country
26 T-ADS Data Retrieval O Terminating Access Domain Selection Data Retrieval
Feature bit: The order number of the bit within the Supported-Features AVP, for example "1".
Feature: A short name that can be used to refer to the bit and to the feature, for example. "ODB-HPLMN-APN".
M/O: Defines if the implementation of the feature is mandatory ("M") or optional ("O").
Description: A clear textual description of the feature.
1.85 SGSNFEATURELIST (Dynamic)
Description: multiple columns Value range:
Format: SGSNFEATURELIST=---
-----------
----
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 21, total 68
pages
---
-----
See the following table for description NO.0-NO.26 and all description in 7.3.10
Feature-List AVP in section 1.68 TS 29272.
1.86 MMEULRFLAG (Dynamic)
Description: multiple columns Value range:
Format: MMEULRFLAG=--
---
-
Column 1: SING_REG_IND; single registration identifier, value: SING_REG_IND
Column 2: S6a or S6d identifier, value: S6AORS6D_IND
Column 3: subscriber data identifier, value: SKIP_SUBDATA
Column 4: GPRS subscriber data identifier, value: GPRS_SUBDATA_IND
Column 5: node type identifier, value: NODE_TYPE_IND
Column 6: initial attachment identifier, value: INIT_ATTATCH_IND
Column 7: PS-LS not supported identifier, value: PS_LCS_NOTSUPP
For details, see descriptions in 7.3.7 ULR-Flags in TS 29272.
1.87 SGSNULRFLAG (Dynamic)
Description: multiple columns Value range:
Format:
SGSNULRFLAG=------
Column 1: SING_REG_IND; single registration identifier, value: SING_REG_IND
Column 2: S6a or S6d identifier, value: S6AORS6D_IND
Column 3: subscriber data identifier, value: SKIP_SUBDATA
Column 4: GPRS subscriber data identifier, value: GPRS_SUBDATA_IND
Column 5: node type identifier, value: NODE_TYPE_IND
Column 6: initial attachment identifier, value: INIT_ATTATCH_IND
Column 7: PS-LS not supported identifier, value: PS_LCS_NOTSUPP
For details, see descriptions in 7.3.7 ULR-Flags in TS 29272.
1.88 MMETIMESTAMP (Dynamic)
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 22, total 68
pages
Format: MMETIMESTAMP=
Description: MME registration and purge time, with a single value. Value range:
09999999999
1.89 S4SGSNTIMESTAMP (Dynamic)
Format: S4SGSNTIMESTAMP=
Description: S4SGSN registration and purge time, with a single value. Value range:
09999999999
1.90 FWDSUP
Format: FWDSUP=
Description: forwarding suppression. Value: YES, NO
1.91 ZCLOCK
Format: ZCLOCK=
Description: Zone cell lock. Value: YES, NO
1.92 MBRCTRL
Format: MBRCTRL=&
Description:
Column 1: DenyDirectCall: Whether the HSS/HLR restricts the direct calls placed to a
GROUPSIM member. Value:
1: Deny: cannot receive calls
0: Allow: can receive calls
Default value: 0
Column 2: DenySMS: Whether the HSS/HLR restricts the short messages sent to a
GROUPSIM member. Value:
1: Deny: cannot receive short messages
0: Allow: can receive shot massages
Default value: 0
1.93 PNP
Format: PNP=-
Description: PNP provision, multiple columns
Column 1: Whether to provide the PNP service, value: YES,
NO
, PNP provision identifier, value: YES, NO
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 23, total 68
pages
Column 2: PNP index, PNP provision identifier, value: 099999
2 Supplementary Services
2.1 CB
Format: CB=--
Description: multiple columns
Column 1: code of supplementary services of the barring types, a string,
with a single value. Value range: BAOC, BOIC, BOICEXHC, BAIC, BICROAM,
BOCROAM
Column 2: basic service (group), a string, with a single value. Value
range:
/*telecom service*/
TS10: allSpeechTransmissionServices, TS11
TS20: allShortMessageServices, TS21, TS22
TS60: allFacsimileTransmissionServices, TS61, TS62, TS63
TS70: allDataTeleservices
TS80: allTeleservices_ExceptSMS
TSD0: allPLMN_SpecificTS, TSD1-TSDF
/*bearer service*/
BS20: allDataCDA_Services, BS21, BS22, BS23, BS24, BS25, BS26, BS2G,
BS2F
BS30: allDataCDS_Services, BS31, BS32, BS33, BS34, BS3F, BS3G
BS40: allPadAccessCA_Services, BS41, BS42, BS43, BS44, BS45, BS46,
BS4G
BS50: allDataPDS_Services, BS51, BS52, BS53, BS5G
BS60: allAsynchronousServices
BS68: allSynchronousServices
BSD0-BSDF
The value is (default) ALL only in the PROVIDE status: The parameter means
valid services subscribed by all subscribers.
Column 3: supplementary service status, a string, with a single
value. Value range:
PROV: Provide
ACT: ACTIVE_OPERATIVE, activate
QUC: ACTIVE_QUIESCENT, sleep
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 24, total 68
pages
Note: PROV is the default value.
2.2 CW
Format: CW=--
Description: multiple columns
Column 1: code of supplementary services of the waiting types, a string,
with a single value. Value: CW
Column 2: basic service (group), a string, with a single value. Value
range:
/*telecom service*/
TS10: allSpeechTransmissionServices, TS11
TS20: allShortMessageServices, TS21, TS22
TS60: allFacsimileTransmissionServices, TS61, TS62, TS63
TS70: allDataTeleservices
TS80: allTeleservices_ExceptSMS
TSD0: allPLMN_SpecificTS, TSD1-TSDF
/*bearer service*/
BS20: allDataCDA_Services, BS21, BS22, BS23, BS24, BS25, BS26, BS2G,
BS2F
BS30: allDataCDS_Services, BS31, BS32, BS33, BS34, BS3F, BS3G
BS40: allPadAccessCA_Services, BS41, BS42, BS43, BS44, BS45, BS46,
BS4G
BS50: allDataPDS_Services, BS51, BS52, BS53, BS5G
BS60: allAsynchronousServices
BS68: allSynchronousServices
BSD0-BSDF
The value is (default) ALL only in the PROVIDE status: The parameter means
valid services subscribed by all subscribers.
Column: supplementary service, a string, with a single value. Value:
PROV: Provide
ACT: ACTIVE_OPERATIVE, activate
Note: PROV is the default value.
2.3 PW
Format: PW=
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 25, total 68
pages
Description: a numerical string, consisting of 8digits, with a single value
2.4 CONTROL
Format: CONTROL=
Description: a string, with multiple values. Value range:
OPER: operator
SUB: subscriber
2.5 CONTROLREASON
Format: CONTROLREASON=
Description: a string, with a single value. Value range:
OPER: operator
SUB: subscriber
2.6 WPA
Format: WPA=
Description: a numerical string, with a single value.
2.7 CF
Format:
CF=-------------------
Description: multiple columns
Column 1: code of supplementary services of the forwarding type, a
string, with a single value. Value range:
CFU: call forwarding unconditional
CFB: call forwarding on busy
CFNRY: call forwarding on no reply
CFNRC: call forwarding on no reachable
CFD: default forwarding
CFBFTN: CFD replaces CFB forwarded-to number
CFNRYFTN: CFD replaces CFNRy forwarded-to number
CFNRCFTN: CFD replaces CFNRc forwarded-to number
Column 2: basic service code, a string, with a single value. Value
range:
/*telecom service*/
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 26, total 68
pages
TS10: allSpeechTransmissionServices, TS11
TS20: allShortMessageServices, TS21, TS22
TS60: allFacsimileTransmissionServices, TS61, TS62, TS63
TS70: allDataTeleservices
TS80: allTeleservices_ExceptSMS
TSD0: allPLMN_SpecificTS, TSD1-TSDF
/*bearer service*/
BS20: allDataCDA_Services, BS21, BS22, BS23, BS24, BS25, BS26, BS2G,
BS2F
BS30: allDataCDS_Services, BS31, BS32, BS33, BS34, BS3F, BS3G
BS40: allPadAccessCA_Services, BS41, BS42, BS43, BS44, BS45, BS46,
BS4G
BS50: allDataPDS_Services, BS51, BS52, BS53, BS5G
BS60: allAsynchronousServices
BS68: allSynchronousServices
BSD0-BSDF
The value is (default) ALL only in the PROVIDE status.
Column 3: supplementary service status, a string, with a single value. Value range:
PROV, REG, ACT, QUC
Note: default value: PROV
Column 4: forwarding number, a numerical string, consisting of 18 digits,
with a single value. The first two digits indicate the number attribute, where 0x81
means an unknown number and 0x91 means an international number.
Column 5: NOTIFICATION TO CALLING SUB a string, with a single
value. Value: YES, (default) NONE.
Column 6: NOTIFICATION TO FORWARDING SUB, a string, with a
single value. Value: YES, NO, (default) NONE.
Column 7: , a numerical string, consisting of 12 digits, with a single value, (default) NONE.
Column 8: , control of user, a string, with a single value. Value: YES, NO
Column 9: , ofa id, a numerical string, with a single value. Value range:
065534
Column 10: , with a single value, and indicating whether the
forwarding number is in the country where the HPLMN is located. Value: YES, NO
Column 11: , with a single value, and indicating whether the
forwarding number is in the country where the VPLMN is located. Value: YES, NO
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 27, total 68
pages
Column 12: with a single value, and indicating whether the forwarding
number is an entertainment number. Value: YES, NO
Column 13: with a single value, and indicating whether the forwarding
number is an information station number. Value: YES, NO
Column 14: with a single value, and indicating whether the
forwarding number subscribes to the numbers after TIFCSI. Value: YES, NO
Column 15: with a single value, and indicating whether the CFD replaces
the CFB service. Value: YES, NO
Column 16: with a single value, and indicating whether the CFD
replaces the CFNRY service. Value: YES, NO
Column 17: with a single value, and indicating whether the CFD
replaces the CFNRC service. Value: YES, NO
When values of column 15, column 16 and column 17 are all NO, the CFD can
replace any CCF.
Column 18: with a single value, and indicating whether the CFD
service is delivered when the user roams internationally. Value: YES, NO
Column 19: with a single value, and indicating whether the Ftn
Number is a short Ftn Number. Value: YES, NO
Column 20: with a single value, and indicating whether the Ftn
Number is a voice mail service number.
2.8 DEFOFAID
Format: DEFOFAID=
Description: a numerical string, with a single value, default OFA ID. Value range:
065534
2.9 GS (Other Supplementary services)
Format: GS=
Description: a string, with a single value. Value range:
CLIP, CLIR, COLP, COLR, MCI, CNAP, ECT, MAH, HOLD, CCBS_A, CCBS_B,
AOCC, AOCI, MPTY, HOTBILL, CAPL, PLMNSS1, PLMNSS2, PLMNSS3,
PLMNSS4, PLMNSS5, PLMNSS6, PLMNSS7, PLMNSS8, PLMNSS9,
PLMNSSA, PLMNSSB, PLMNSSC, PLMNSSD, PLMNSSE, PLMNSSF,
ALLPLMNSS, CD, ELCS, CPP, ICSIND, ANCHOR.
2.10 CLIRES
Format: CLIRES=
Description: CliRestrictionOption, a string, with a single value. Value range: PERM,
TEMPRES, TEMPALLOW
2.11 CLIPOC
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 28, total 68
pages
Format: CLIPOC=
Description: ClipOverrideCategory, a string, with a single value. Value: YES, NO
2.12 COLPOC
Format: COLPOC=
Description: ColpOverrideCategory, a string, with a single value. Value: YES, NO
2.13 CNAPOC
Format: CNAPOC=
Description: CNAPOverrideCategory, a string, with a single value. Value: YES, NO
2.14 LCS
Format: LCS=
Description: LCS template number, a string, with a single value. Value range: 065534
2.15 UUS
Format: UUS=
Description: UUS signaling point value, a sting, with multiple values. Value range:
UUS1: send and receive UUI messages between call origination and call
termination
UUS2: send UUI messages when hearing the ring tone of the opposite party
UUS3: send and receive UUI messages after establishment of communication
2.16 CFSMS
Format:
CFSMS=-------
Description: multiple columns
Column 1: supplementary service status, a string, with a single value. Value range:
PROV, REG, ACT, QUC
Column 2: OFAID with a single value. Value range: 065534
Column 3: forwarding number, consisting of 328 digits, with a single value. The first two digits indicate the number attribute, where 0x81 means an unknown number and
0x91 means an international number.
Column 4: with a single value, and indicating whether the forwarding number is in the
country where the HPLMN is located. Value: YES, NO
Column 5: with a single value, and indicating whether the forwarding number is in the
country where the VPLMN is located. Value: YES, NO
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 29, total 68
pages
Column 6: with a single value, and indicating whether the forwarding number is an
entertainment number. Value: YES, NO
Column 7: with a single value, and indicating whether the forwarding number is an
information station number. Value: YES, NO
Column 8: with a single value, and indicating whether the forwarding number is a
mailbox number. Value: YES, NO
2.17 ACC_LENGTH
Format: ACC_LENGTH=
Description: with a single value, ACC length. Value range:
DICR_0: acc length is 0
DICR_1: acc length is 1
DICR_2: acc length is 2
DICR_3: acc length is 3
DICR_4: acc length is 4
DICR_5: acc length is 5
DICR_6: acc length is 6
DICR_7: acc length is 7
DICR_8: acc length is 8
DICR_9: acc length is 9
DICR_10: acc length is 10
DICR_11: acc length is 11
DICR_12: acc length is 12
DICR_13: acc length is 13
DICR_14: acc length is 14
DICR_15: acc length is 15
DICR_16: acc length is 16
DICV: acc length is 127
2.18 CLRBSG
Format: CLRBSG=-----
Description: multiple columns
Column 1: service code. Value range:
CLIP: calling line identification presentation
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 30, total 68
pages
CLIR: calling line identification restriction
COLP: connected line identification presentation
COLR: connected line identification restriction
Column 2: TS1X, value: YES, NO
Column 3: TS2X, value: YES, NO
Column 4: TS6X, value: YES, NO
Column 5: BS2X, value: YES, NO
Column 6: BS3X, value: YES, NO
2.19 MC
Format: MC=-
Description: multiple columns
Column 1: Specifying the maximum number of MC (Multi Call) attempts that the HLR
allows, ranging from 2 to 7.
Column 2: Specifying the maximum number of MC attempts that the user determines,
ranging from 1 to 7.
2.20 UEREACH
Format: UEREACH=-
Description: multiple columns
Column 1: Registered with MME. Value:
0: Not registered
1: Registered
Column 2: Registered with SGSN. Value:
0: Not registered
1: Registered
3 Multi-MSISDN
3.1 MMSISDN
Format:
MMSISDN=-----------------------------
Description: multiple columns
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 31, total 68
pages
Column 1: secondary MSISDN number, a numerical string, consisting of
16 digits, with a single value
Column 2: basic service of bearer capability, a string, with a single value. Value
range: TS11, TS21, TS22, TS61, TS62, TS63, TSD1, BS21, BS22, BS23, BS24, BS25,
BS26, BS2G, BS2F, BS31, BS32, BS33, BS34, BS3G, BS3F, BS41, BS42, BS43, BS44,
BS45, BS46, BS51, BS52, BS53, BS61, BS62, BS81, BS82
Column 3: ITC: Information Transfer Capability, a numerical string, with a single
value. Value range:
1: UDI
2: AUDIO
3: FAX
5: RDI
7: ALTFAX
NONE (default value)
Column 4: RCR: RADIO CHANNEL REQUIREMENT: a numerical string, with a
single value. Value range:
0: half rate support only MS
1: full rate support only MS
2: dual rates support MS/half rate preferred
3: dual rates support MS/full rate preferred
NONE (default value)
Column 5: DC: Data compression: a numerical string, with a single value. Value
range:
0: Data compression not possible
1: Data compression possible
NONE (default value)
Column 6: S: Structure: a numerical string, with a single value. Value range:
0: Service Data Unit integrity
3: Unstructured
NONE (default value)
Column 7: RA: Rate Adaption: a numerical string, with a single value. Value range:
0: No Rate Adaption
1: V.110, I.460/X.30 Rate Adaption
2: ITU-T X.31 flag stuffing
3: V.120
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 32, total 68
pages
4: H.223 and H.245
5: PIAFS
NONE (default value)
Column 8: SAP: Signaling Access Protocol: a numerical string, with a single value.
Value range:
1: I.440/450
2: X.21
3: X.28-dedicated PAD, individual NUI
4: X.28-dedicated PAD, universal NUI
5: X.28-non dedicated PAD
6: X.32
NONE (default value)
Column 9: SA: Synchronous/Asynchronous transfer: a numerical string, with a
single value. Value range:
0: Synchronous
1: Asynchronous
NONE (default value)
Column 10: NSB: Number of stop bits: a numerical string, with a single value.
Value range:
0: 1 bit
1: 2 bits
NONE (default value)
Column 11: NDB: Number of data bits: a numerical string, with a single value.
Value range:
0: 7 bits
1: 8 bits
NONE (default value)
Column 12: UR: User Rate: a numerical string, with a single value. Value range:
1: 300 bit/s
2: 1200 bit/s
3: 2400 bit/s
4: 4800 bit/s
5: 9600 bit/s
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 33, total 68
pages
6: 12.0 kbit/s transparent (non compliance with X.1 and V.110)
7: 1.2 kbit/s/75 bit/s Recommendation V.23, (asymmetric) X.1 and V.110.
NONE (default value)
Column 13: IR: Intermediate Rate: a numerical string, with a single value. Value
range:
2: 8 kbit/s
3: 16 kbit/s
NONE (default value)
Column 14: NICT: NIC on TX: a numerical string, with a single value. Value
range:
0: does not require sending data with network independent click
1: requires sending data with network independent clock
NONE (default value)
Column 15: NICR: NIC on RX: a numerical string, with a single value. Value:
0: cannot accept data with network independent clock
1: can accept data with network independent clock
NONE (default value)
Column 16: NPB: Parity information: a numerical string, with a single value.
Value:
0: Odd
2: Even
3: None (case-sensitive)
4: Forced to 0
5: Forced to 1
NONE (default value)
Column 17: CE: Connection Element: a numerical string, with a single value.
Value:
0: Transparent
1: Non transparent
2: Both, transparent preferred
3: Both, non transparent preferred
NONE (default value)
Column 18: MT: Modem Type: a numerical string, with a single value. Value:
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 34, total 68
pages
0: None
1: V.21
2: V.22
3: V.22 bis
4: V.23
5: V.26 ter
6: V.32
7: modem for undefined interface
8: Autobauding type 1
NONE (default value)
Column 19: OMT: Other Modem Type: a numerical string, with a single value.
Value:
0: No other Modem Type
2: V.34
NONE (default value)
Column 20: FNUR: Fixed network User Rate: a numerical string, with a single
value. Value:
0: Not applicable
1: 9600 bit/s
2: 14400 bit/s
3: 19200 bit/s
4: 28800 bit/s
5: 38400 bit/s
6: 48000 bit/s
7: 56000 bit/s
8: 64000 bit/s
9: 33600 bit/s
10:32000 bit/s
11:31200 bit/s
NONE (default value)
Column 21: LA2: a numerical string, with a single value. Value:
6: Recommendation X.25, link level
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 35, total 68
pages
8: International Organization for Standardization (ISO) 6429, code set 0
(DC1/DC3)
10: videotex profile 1
12: COPNOFLCT (Character oriented protocol with not flow mechanism)
13: X.75 layer 2 modified (CAPI)
NONE (default value)
Column 22: TM: transfer mode
0: circuit mode
1: packet mode
Column 23: DMODE: duplex mode
0: half duplex
1: full duplex
Column 24: NIRR:
0: No meaning is associated with this value
1: Data up to and including 4.8kb/s, full rate, non-transparent, 6kb/s radio
interface rate is requested
Column 25: ACC: Acceptable channel coding
0: None
1: TCH/F 4.8 acceptable
2: TCH/F 9.6 acceptable
3: TCH/F 4.8&9.6 acceptable
8: TCH/F 14.4 acceptable
9: TCH/F 14.4&4.8 acceptable
10: TCH/F 14.4&9.6 acceptable
11: TCH/F 14.4&9.6&4.8 acceptable
Column 26: NOTC: Maximum number of traffic channels
0:1 TCH
1:2 TCH
2:3 TCH
3:4 TCH
4:5 TCH
5:6 TCH
6:7 TCH
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 36, total 68
pages
7:8 TCH
Column 27: UIMI:
0: User initiated modification not allowed/required/applicable
1: User initiated modification up to 1 TCH/F allowed/may be requested
2: User initiated modification up to 2 TCH/F allowed/may be requested
3: User initiated modification up to 3 TCH/F allowed/may be requested
4: User initiated modification up to 4 TCH/F allowed/may be requested
NONE (default value)
Column 28: WAIUR: Wanted air interface user rate
0: air interface user rate not applicable
1:9.6 kbit/s
2:14.4kbit/s
3:19.2kbit/s
5:28.8kbit/s
6:38.4kbit/s
7:43.2kbit/s
8:57.6kbit/s
NONE (default value)
Column 29: ACCEx: Acceptable channel coding extended
0: None
1: TCH/F 43.2 acceptable
2: TCH/F 32.0 acceptable
3: TCH/F 43.2&32.0 acceptable
4: TCH/F 28.8 acceptable
5: TCH/F 43.2&28.8 acceptable
6: TCH/F 43.2&32.0 acceptable
7: TCH/F 43.2&32.0&28.8 acceptable
NONE (default value)
Column 30: AI: Asymmetry Indication
0, 3: channel coding symmetry preferred
1: downlink biased channel coding asymmetry is preferred
2: uplink biased channel coding asymmetry is preferred
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 37, total 68
pages
NONE (default value)
3.2 ALS
Format: ALS=
Description: a string consisting of 16 digits, in a format similar to TBCD format.
4 CUG Data 4.1 CUG_SUB
FormatCUG_SUB=---;
Description: CUG subscription data, with multiple columns. Value range
Column 1: InterLock: a numerical string consisting of eight digits, with a single
value. Value range: 0000000099999999
Column 2: cugIndex: a numerical string, with a single value. Value range: 032767
Column 3: IntraCUGOptions: a string, with a single value. Value range:
NOBAR: no CUG barring
ICBAR: barring of CUG incoming calls
OCBAR: barring of CUG outgoing calls
Default value: NOBAR
Column 4: BSGList: basic service group list, a string, with multiple values. Value
range:
ALL: all basic services
/*telecom service*/
TS10: allSpeechTransmissionServices, TS11
TS60: allFacsimileTransmissionServices, TS61, TS62, TS63
/*bearer service*/
BS20: allDataCDA_Services, BS21, BS22, BS23, BS24, BS25, BS26, BS2G,
BS2F
BS30: allDataCDS_Services, BS31, BS32, BS33, BS34, BS3F, BS3G
4.2 CUG_FEA
Format: CUG_FEA=--;
Description: CUG feature data, with multiple columns. Value range:
Column 1: basic service group, with a single value. Value range:
ALL: all basic services
/*telecom service*/
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 38, total 68
pages
TS10: allSpeechTransmissionServices, TS11
TS60: allFacsimileTransmissionServices, TS61, TS62, TS63
/*bearer service*/
BS20: allDataCDA_Services, BS21, BS22, BS23, BS24, BS25, BS26, BS2G,
BS2F
BS30: allDataCDS_Services, BS31, BS32, BS33, BS34, BS3F, BS3G
Column 2: CUGIndex: a numerical string, with a single value. Value range:
032767
Column 3: InterCUGRestrictions, a string, with a single value. Value range:
CUG: Only CUG calls are allowed
OA: Inter-group calls are allowed
IA: Inter-group incoming calls are allowed
IOA: Inter-group outgoing calls are allowed
5 CAMEL Data
5.1 NTCSI
Format:
TCSI=-------
-------
Description: with a single value, multiple columns
Column 1: value. Value range:
COLLECTINFO: collect information, DP2 (OCSI)
ROUTESELFAIL: route selection fails, DP4 (OCSI)
TAA: Terminating_Attempt_Authorized, DP12. DP12 trigger list contains up
to 5 kinds of telecommunications computer service interface (TCSI) code.
TBUSY: DP13 (TCSI)
TNOANSWER: DP14 (TCSI)
Column 2: SCPaddress index, E.164 Format address
Column 3: service key, 02147483647
Column 4: default calls processing. Value range:
ContinueCall: continue the call
ReleaseCall: release the call
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 39, total 68
pages
Column 5: CAMEL service processing capability. Value range:
PHASE 1, PHASE 2, PHASE 3, PHASE 4
Column 6: VLR_NOTSUPPHASE1: VLR/MSC does not support the CAMEL. Value
range:
0: Allow location updates and calling service
1: Allow location updates but bar all the calling service
2: Deny location updates
Column 7: VLR_SUPLPORNOTSUPPHASE2: VLR/MSC does not support CAMEL
PHASE2. Value range:
0: Use the earlier CAMEL version
1: Allow location updates but bar all the calling service
2: Deny location updates
Column 8: VLR_SUPLPORNOTSUPPHASE3: VLR/MSC does not support CAMEL
PHASE3. Value range:
0: Use the earlier CAMEL version
1: Allow location updates but bar all the calling service
2: Deny location updates
Column 9: VLR_SUPLPORNOTSUPPHASE4: VLR/MSC does not support CAMEL
PHASE4. Value range:
0: Use the earlier CAMEL version
1: Allow location updates but bar all the calling service
2: Deny location updates
Column 10: GMSC_NOTSUPPHASE1: GMSC does not support CAMEL PHASE2.
Value range:
0: Allow the called service
1: Deny all the called service
Column 11: GMSC_SUPLPORNOTSUPPHASE2: GMSC does not support CAMEL
PHASE2. Value range:
0: Use the earlier CAMEL version
1: Allow the called service
2: Deny all the called service
Column 12: GMSC_SUPLPORNOTSUPPHASE3: GMSC does not support CAMEL
PHASE3. Value range:
0: Use the earlier CAMEL version
1: Allow the called service
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 40, total 68
pages
2: Deny all the called service
Column 13: GMSC_SUPLPORNOTSUPPHASE4: GMSC does not support CAMEL
PHASE4. Value range:
0: Use the earlier CAMEL version
1: Allow the called service
2: Deny all the called service
Column 14: PSICONF: whether the CAMEL user provides subscriber information in
SRI flow. Value: YES, NO
Column 15: CSI application scope:
HPLMN: Return the T-CSI data when the subscriber roams to the HPLMN.
FPLMN: Return the T-CSI data when the subscriber roams outside the HPLMN.
INTERNATIONAL: Return the T-CSI data when the subscriber roams outside
the home country.
HPLMNC: Return the T-CSI data when the subscriber roams within the home
country.
ALL_PLMN: Return the T-CSI data when the subscriber roams to any network.
5.2 OCSI
Format: OCSI=
Description: a numerical string, with a single value. Value range: 099999, OCSI data template for subscription
5.3 TCSI
Format: TCSI=
Description: a numerical string, with a single value. Value range: 099999, TCSI data template for subscription
5.4 GPRSCSI
Format: GPRSCSI=
Description: gprscsi template number, a string, with a single value. Value range:
065534
5.5 SSCSI
Format: SSCSI=
Description: sscsi template number, a string, with a single value. Value range: 065534
5.6 VTCSI
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 41, total 68
pages
Format: VTCSI=
Description: vtcsi template number, a string, with a single value. Value range: 065534
5.7 DCSI
Format: DCSI=
Description: dcsi template number, a string, with a single value. Value range: 065534
5.8 SMSCSI
Format: SMSCSI=
Description: smstcsi template number, a string, with a single value. Value range:
099999
5.9 MTSMSCSI
Format: MTSMSCSI=
Description: mtsmstcsi template number, a string, with a single value. Value range:
099999
5.10 UCSI
Format: UCSI=
Description: ucsi template number, a string, with a single value. Value range: 065534
5.11 MCSI
Format: MCSI=
Description: mcsi template number, a string, with a single value. Value range: 065534
5.12 TIFCSI
Format: TIFCSI=
Description: whether to subscribe to TIFCSI and with a single value. Value range:
YES/NO
5.13 LUCSI
Format: LUCSI=
Description: LU-CSI template number, a numerical string, with a single value. Value
range: 065534
5.14 IMCSI
Format: IMCSI=-
Description: multiple columns Value range:
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 42, total 68
pages
Column 1: o-IM-CSI template number, a numerical string, with a single value.
Value range: 065534;
Column 2: vt-IM-CSI template number, a numerical string, with a single value.
Value range: 065534;
Note: Only a single IMCSI data record exists.
5.15 SHORTNUM
Format: SHORTNUM=
Description: long numbers and short numbers template, a numerical string, with a single
value. Value range: 065534
5.16 SUBTPL_ID
Format: SUBTPL_ID=
Description: 065534 subscriber template ID, a numerical string, with a single value. Value range:
5.17 OPTGPRS_TPL_ID
Format: OPTGPRS_TPL_ID=
Description: OPTGPRS template ID, a numerical string, with a single value. Value
range: 065534
6 GPRS Data
6.1 PDPCID
Format: PDPCID=
Description: a numerical string, with a single value. Value range: 0254. The field is consistent with the hybrid subscription template number set by the current HLR. For a
subscriber, this field cannot appear concurrently with the PDPCONTEXT.
6.2 PDPCONTEXT
Format:
PDPCONTEXT=----
--------------
-------------
Description: multiple columns. For a subscriber, this field cannot appear concurrently
with PDPCID.
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 43, total 68
pages
Column 1: PdpId, a numerical string, with a single value. Value range:
150. Mandatory parameter
Column 2: Organize, a string, with a single value. Value range:
240241. Mandatory parameter
240: ETSI address
241: ITEFaddress
Column 3: PDPaddress type, a numerical string, with a single
value, mandatory. Value range:
When the value of Organize is 240, the values 00, 01 and 02 represent the
following meanings:
00: dynamic x.121 address
01: ppp dynamic address
02: OSP IHOSS address
When the value of Organize is 241, the values 33 and 87 represent the
following meanings
33: dynamic IPV4 address
87: dynamic IPV6 address
141: dynamic IPV4IPV6 address
Column 4: whether the address is a dynamic address, a numerical
string, with a single value, mandatory. Value range: 0, 1
0: static address
1: dynamic address
Column 5: Pdpaddress, a string, with a single value. Value range: a
string consisting of 32 digits, optional. Default value: NONE
Column 6: a parameter of the delay type, a numerical string
consisting of 1 digit, with a single value, optional. Value range: 04
0: default
1: Delay_Clas_1
2: Delay_Clas_2
3: Delay_Clas_3
4: Delay_Clas_4
Column 7: reliability parameter, a numerical string consisting of 1
digit, with a single value, optional. Value range: 05
0: default
1: Acknowledged GTP, LLC, and RLC Protected data
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 44, total 68
pages
2: Unacknowledged GTP Acknowledged LLC and RLC, Protected data
3: Unacknowledged GTP and LLC Acknowledged RLC, Protected data
4: Unacknowledged GTP, LLC, and RLC, Protected data
5: Unacknowledged GTP, LLC, and RLC, Unprotected data
Column 8: peak throughput, a numerical string consisting of 1
digit, with a single value. Value range: 09
0: default
1: Up to 1000 octet/s
2: Up to 2000 octet/s
3: Up to 4000 octet/s
4: Up to 8000 octet/s
5: Up to 16000 octet/s
6: Up to 32000 octet/s
7: Up to 64000 octet/s
8: Up to 128000 octet/s
9: Up to 256000 octet/s
Column 9: average throughput, a numerical string consisting
of 12 digits, with a single value, optional. Value range: 031
0: default
1: 100 octet/s
2: 200 octet/s
3: 500 octet/s
4: 1000 octet/s
5: 2000 octet/s
6: 5000 octet/s
7: 10000 octet/s
8: 20000 octet/s
9: 50000 octet/s
10: 100000 octet/s
11: 200000 octet/s
12: 500000 octet/s
13: 1000000 octet/s
14: 2000000 octet/s
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 45, total 68
pages
15: 5000000 octet/s
16: 10000000 octet/s
17: 20000000 octet/s
18: 50000000 octet/s
31: Best Effort
Column 10: precedence class, a numerical string consisting of
1 digit, with a single value, optional. Value range: 03
0: default
1: High Priority
2: Normal Priority
3: Low Priority
Column 11: accessibility to PLMN, a numerical string
consisting of 1 digit, optional. Value range: 01
0: only accessible APN of HPLMN
1: accessible to APN of VPLMN
Column 12: APN site, a string consisting of 63 digits, with a single value,
optional. Default value: NONE
Column 13: AR: AR priority: a numerical string, with a single value. Value range:
1: High Priority
2: Normal Priority
3: Low Priority
NONE
Default value: NONE
Column 14: TC: Traffic Class: a numerical string, with a single value. Value range
0: Reserved
1: Conversational class
2: Streaming class
3: Interactive class
4: Background class
NONE
Default value: NONE
Column 15: DO: Delivery order: a numerical string, with a single value. Value
range:
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 46, total 68
pages
0: Reserved
1: With delivery order ('yes')
2: Without delivery order ('no')
NONE
Default value: NONE
Column 16: ErrSdu: Delivery of erroneous SDUs: a numerical string, with a single
value. Value range:
0: Reserved
1: No detect ('')
2: Erroneous SDUs are delivered ('yes')
3: Erroneous SDUs are not delivered ('no')
NONE
Default value: NONE
Column 17: MSS: Maximum SDU size: a numerical string, with a single value.
Value range
0: Reserved
1150:101500 octets, using a granularity of 10 octets
151: 1502 octets
152: 1510 octets
153: 1520 octets
NONE
Default value: NONE
Column 18: MaxUp: Maximum bit rate for uplink: a numerical string, with a single
value. Value range: 0254
0: Reserved
163: n = rate
64127: n = (rate64)/8+64, (rate: 64568)
128254: n = (rate576)/64+128, (rate: 5768640)
NONE
Default value: NONE
Column 19: MaxDown: Maximum bit rate for downlink: a numerical string, with a
single value. Value range: 0254
0: Reserved
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 47, total 68
pages
163: n = rate
64127: n = (rate64)/8+64, (rate: 64568)
128254: n = (rate576)/64+128, (rate: 5768640)
NONE
Default value: NONE
Column 20: RBER: Residual Bit Error Rate: a numerical string, with a single value.
Value range:
0: Reserved
1:5*10E2
2:1*10E2
3:5*10E3
4:4*10E3
5:1*10E3
6:1*10E4
7:1*10E5
8:1*10E6
9:6*10E8
NONE
Default value: NONE
Column 21: SduER: SDU error ratio: a numerical string, with a single value. Value
range:
0: Reserved
1: 1*10E2
2: 7*10E3
3: 1*10E3
4: 1*10E4
5: 1*10E5
6: 1*10E6
7: 1*10E1
NONE
Default value: NONE
Column 22: TD: Transfer delay: a numerical string, with a single value. Value
range:
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 48, total 68
pages
0: Reserved
115:10ms150ms, in 10 ms increments
1631:200ms950ms, in 50 ms increments
3262:1000ms4100ms, in 100 ms increments
NONE
Default value: NONE
Column 23: TP: Traffic handling priority: a numerical string, with a single value.
Value range:
0: Reserved
1: Priority level 1
2: Priority level 2
3: Priority level 3
NONE
Default value: NONE
Column 24: GMaxUp: Guaranteed bit rate for uplink: a numerical string, with a
single value. Value range: 0254
0: Reserved
163: n = rate
64127: n = (rate64)/8+64, (rate: 64568)
128254: n = (rate576)/64+128, (rate: 5768640)
NONE
Default value: NONE
Column 25: GMaxDown: Guaranteed bit rate for downlink: a numerical string,
with a single value. Value range: 0254
0: Reserved
163: n=rate
64127: n = (rate64)/8+64, (rate: 64568)
128254: n = (rate576)/64+128, (rate: 5768640)
NONE
Default value: NONE
Column 26: : PDP context charging characteristics: a numerical string,
with a single value. Value range:
0: None charging characteristics
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 49, total 68
pages
1: Hot billing
2: Flat rate
4: Prepaid service
8: Normal billing
3:3
5:5
6:6
7:7
9:9
...
253:253
254:254
NONE
Default value: NONE, indicating Normal billing
Column 27: : Maximum extended bit rate for downlink: a
numerical string, with a single value. Value range:
8700k16000k (with an interval of 100 kbit/s)
16M128M (with an interval of 1 Mbit/s)
128M256M (with an interval of 2 Mbit/s)
NOExtend
Default value: NOExtend
Column 28: : Maximum extended guaranteed bit rate for
downlink: a numerical string, with a single value. Value range:
8700k16000k (with an interval of 100 kbit/s)
16M128M (with an interval of 1 Mbit/s)
128M256M (with an interval of 2 Mbit/s)
NOExtend
Default value: NOExtend
Column 29: : Maximum extended bit rate for uplink: a
numerical string, with a single value. Value range:
8700k16000k (with an interval of 100 kbit/s)
16M128M (with an interval of 1 Mbit/s)
128M256M (with an interval of 2 Mbit/s)
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 50, total 68
pages
NOExtend
Default value: NOExtend
Column 30: : Maximum extended guaranteed bit rate for
uplink: a numerical string, with a single value. Value range:
8700k16000k (with an interval of 100 kbit/s)
16M128M (with an interval of 1 Mbit/s)
128M256M (with an interval of 2 Mbit/s)
NOExtend
Default value: NOExtend
Column 31: : PDP address of IPV4, a string, with a single value
and consisting of 8 digits. Value range: ["0000""FFFF"]
Column 32: : standard charging characteristics, characters, with
a single value, 4 hexadecimal digits. Value range: ["0000""FFFF"]
6.3 CHARGE_GLOBAL
Format: CHARGE_GLOBAL=
Description: a string, with a single value. Value range:
NONE: no charging feature
HOT: hot charging, realtime charging
FLAT: flat charging
PREPAID: prepaid
NORMAL: ordinary charging
3:3
5:5
6:6
7:7
9:9
...
151:151
152:152
153:153
...
253:253
254:254
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 51, total 68
pages
6.4 STD_CHARGE_GLOBAL
Format: STD_CHARGE_GLOBAL=
Description: a string, with a single value, 4 hexadecimal digits. Value range:
["0000""FFFF"]
6.5 OPTGPRS
Format:
OPTGPRS=-------------
Description: multiple columns Value range:
Column 1: context id. Value range: 150
Column 2: apntpl id. Value range: 065534
Column 3: qostpl id. Value range: 065534
Column 4: the part one of Address Type. Value: 240, 241
240: ETSI address
241: ITEF address
Column 5: the part two of Address Type. Value range: 33, 87, 0, 1, 2, 141
When the value of Organize is 240, the values 00, 01, and 02 represent the
following meanings:
00: dynamic x.121 address
01: ppp dynamic address
02: OSP IHOSS address
When the value of Organize is 241, the values 33, 87, and141 represent the
following meanings:
33: dynamic IPV4 address
87: dynamic IPV6 address
141: dynamic IPV4IPV6 address
3: dynamic IPV4_OR_IPV6 address
Column 6: PDP Address. Value: ip address or x.25 address format
Column 7: Whether to allow accessing the APN of the VPLMN. Value: 1, 0
Column 8: charging characteristics. Value range:
0: None charging characteristics
1: Hot billing
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 52, total 68
pages
2: Flat rate
4: Prepaid service
8: Normal billing
3:3
5:5
6:6
7:7
9:9
253:253
254:254
Column 9: : PDP address of IPV4, a string, with a single
value, consisting of 8 characters
Column 10: EPS_QOStempalte number. Value range: 065534
Column 11: default APN. Value: YES, NO
0: YES
1: NO
Column 12: *APN. Value: YES, NO
0: YES
1: NO
Column 13: APN type, with a single value. Value range: PS_APN, EPS_APN,
BOTH:
PS_APN: 1
EPS_APN: 2
BOTH: 3
Column 14: standard charging characteristics, characters, with a single value,
4 hexadecimal digits. Value range: ["0000""FFFF"]
6.6 OPTGPRSTPLID
Format: OPTGPRSTPLID=
Description: a numerical string, with a single value. Value range: 065534
7 FM Data
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 53, total 68
pages
7.1 FMSUBTYPE
Format: FMSUBTYPE=
Description: a string, with a single value. The parameter indicates the role of the user in
the FM service. Value range:
INITSUB: initial user
SUPVSUB: manager user
REMOTESUB: GSM virtual remote user
7.2 INITSUB
Format: INITSUB=
Description: initial subscriber, a string, with a single value. Value range: 01
7.3 SUPVSUB
Format: SUPVSUB=
Description: supervise subscriber, a string, with a single value. Value range: 01
7.4 FMSUBCOR
Format:
FMSUBCOR=---------
Description: FM subscriber corset, multiple columns. The parameter exists only if
FMSUBTYPE is INITSUB or SUPVSUB. Each column has the same range: 0254. Default value: 255.
7.5 AUTHREMOTE
Format: AUTHREMOTE=-
Description: FM authorized remote number, multiple columns. Value range:
Column 1: authorized remote number, a string with 15 digits, in a format similar to
TBCD format.
Column 2: authorized type, value range:
INITSUB: initiating subscriber
SUPVSUB: supervisor
7.6 REGREMOTE
Format: REGREMOTE=--------
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 54, total 68
pages
Description: registered remote number information, multiple columns
Column 1: registered remote number, a string consisting of 16 digits, in a
format similar to TBCD format
Column 2: a string that describes the function of the remote number, with a
single value, optional, and consisting of 60 digits. Default value: NONE
Column 3: remote number type. Value:
DUMMYRM: dummy remote;
GSMRM: GSM remote
Column 4: function entity address, a numerical string consisting of 115 digits, with a single value
Column 5: Corset of the remote numbers. Value range: 1254. Default value: 255
Column 6: Corset of the remote numbers. Value range: 1254. Default value: 255
Column 7: Corset of the remote numbers. Value range: 1254. Default value: 255
Column 8: Corset of the remote numbers. Value range: 1254. Default value: 255
Column 9: Corset of the remote numbers. Value range: 1254. Default value: 255
8 EIN Data
8.1 EIN
Format: EIN=-Description: multiple columns
Column 1: service type. Value range:
EOCSI: EOCSI service
ETCSI: ETCSI service
BEOCSI: BEOCSI service
EOICK: EOICK service
Column 2: service key, a numerical string, with a single value. Value range:
0999
9 Multi-IMSI Data
9.1 MIMSI
Format:
MIMSI=-----
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 55, total 68
pages
-
Description: Multi-IMSI data is exported by IMSI and each IMSI data occupies only
one line. Value range:
Column 1: IMSI number, with a numerical string consisting of 16 digits, in a
format similar to TBCD format
Column 2: user type. Value range:
MULTIIMSI: multi IMSI user
ORDERLYRING: OrderlyRing user
SIMULTANEOUSRING: SimultaneousRing user
ONELIVE: OneLive user
Column 3: subscription serial number. Value range: 19
Column 4: connection sequence number. Value range: 19
Column 5: IMSI used to receive short messages. Value range: 19
Column 6: IMSI used for the VOBB service. Value range: 09
Column 7: Index of the IMSI contained in the latest successful PSI response
9.2 VOICE
Format: VOICE=-
Description: multiple columns
Column 1: voice mailbox number, a numerical string consisting of 115 digits
Column 2: voice mailbox index. Value range: 12 digits
10 LINKSIM Data
10.1 SIMSI
Format: SIMSI=
Description: a numerical string consisting of 16 digits, in a format similar to TBCD
format. Value: IMSI number of the bound user
11 OKSC Data
11.1 OKSC
Format: OKSC=
Description: a numerical string, with a single value. Value range: 0-65534, OKSC data
template for subscription.
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 56, total 68
pages
12 Nokia Private Service SMS INAP Subscription Data
12.1 NSMSIN (NSMSIN Data)
Format:
NSMSIN=------
Description: multiple columns, with a single value
Column 1: SCP address, which contains a string of 1 to 15 digits, in a format
similar to TBCD
Column 2: NSMSIN service key. Value range: 12147483647
Column 3: detecting point (MO), which specifies whether the IN service is
triggered when the SMS is originated. Value: YES, NO
Column 4: detecting point (MT), which specifies whether the IN service is
triggered when the SMS is terminated. Value: YES, NO
Column 5: detecting point (SR), which specifies whether the IN service is triggered
when the status report is delivered. Value: YES, NO
Column 6: TAMM, which specifies whether all short messages can be triggered.
Value: YES, NO
Column 7: STATUS, which specifies the status of the SMS INAP service. Value:
NOTPROV, PROV, ACT
13 COMISDN Service or Multi-SIM Service Subscription Data
Data of other vendors must be migrated by running the COMISDN command.
13.1 COMISDN (COMISDN Data)
Format: COMISDN=-
Description: COMISDN service group number, multiple columns, with a single value
Column 1: COMISDN, which contains a string of 1 to 15 digits, in a format similar
to TBCD
Column 2: OVERIDE, which specifies the COMISDN override enable. Value: YES,
NO
13.2 OWNISDN (OWNISDN Data)
Format: OWNISDN=--
Description: multiple columns, with multiple records
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 57, total 68
pages
Column 1: auxiliary number, which contains a string of 1 to 15 digits, in a format
similar to TBCD
Column 2: Terminating Call Right (TCR) of GROUPSIM members, which specifies whether
the called subscriber is allowed to receive a call or short message. Value:
PCALL: 1 (default value), allowed to receive a call or short message
NCALL: 0, not allowed to receive a call or short message
Column 3: serial number of the auxiliary number, which is automatically generated to 19
The primary number is fixed to 1 and the default value is 255.
13.3 MSIM (Subscribing to Multi-SIM Service)
Format:
MSIM=----------
-
Description: multiple columns, with multiple records
Column 1: E multi-IMSI subscriber type. Value:
ACTBYUPL: considering the subscriber who performs the latest location
update as the activated subscriber
ACTBYUSSD: considering the subscriber who conducts a USSD operation
for activating itself as the activated subscriber
Sequential
Parallel
Parallel_preferred
MISDN: Multi-MSISDN
Column 2: MSISDN activation code, which contains a string of 1 to 15 digits, in a
format similar to TBCD
Column 3: no answer time for parallel alerting. Value range: 0255
Column 4: no answer time for sequential alerting. Value range: 0255
Column 5: user type. Value range: 0254
Column 6: tone type. Value: Basic_Tone, Intelligent_Tone
Column 7: call-forwarding suppression. Value: YES, NO
Column 8: sms activation MSISDN, which contains a string of 1 to 15 digits, in a
format similar to TBCD
Column 9: voice activation MSISDN, which contains a string of 1 to 15 digits, in a
format similar to TBCD
Column 10: whether to support synchronization. Value:
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 58, total 68
pages
Allowed (1)
Denied (0): default value
Column 11: MMS activation MSISDN, which contains a string of 1 to 15 digits
13.4 LCS Activation MEMBERISDN, Which Contains a String of 1 to 15 Digits (MEMBERISDN Data)
Format: MEMBERISDN=-
Description: multiple columns
Column 1: multi-SIM member MSISDN, which contain a string of 1 to 15 digits, in a
format similar to TBCD
Column 2: member order. Value range: 08, 0 means not to activate the MSISDN of a member
Note: Multiple records are made.
13.5 GROUPISDN (GROUPISDN Service Status)
Format: GROUPISDN=--
Description: multiple columns, with a single value
Column 1: group MSISDN.
Column 2: whether to support synchronization. Value:
Denied (0): not support (default)
Allowed (1): support
Column 3: whether to deny the USSD operation. Value:
Denied (0): deny
Not_Denied (1): not deny
Not_Support (255): default
14 MSM Service Subscription Data
14.1 M2M
Format: M2M=
Description: whether to provide the service of reporting subscriber's status to the M2M
platform. Value: PROV, NOTPROV
14.2 USERCATEGORY
Format: USERCATEGORY=
Description: Specifies whether a subscriber is an M2M or normal subscriber. Value:
NORMAL, M2M
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 59, total 68
pages
14.3 IMEIBIND
Format: IMEIBIND=-
Description: multiple columns
Column 1: IMEIID, for internal use only, which is set to 1
Column 2: IMEI that has been bound with an IMSI, which contains a string of 1 to 14
digits, in a format similar to TBCD
Note: Multiple records are made.
15 EPS Service Subscription Data
15.1 EGR
Format: EGR=-
Description: multiple columns
Column 1: whether to provide the EGR service, that is, whether HSS can interwork with
HLR. Value: YES, NO
Column 2: HLR serial number corresponding to the EGR service. Value range: 0255
Note: A single record is made.
15.2 NON3GPP
Format:
NON3GPP=-------
Description: multiple columns
Column 1: whether to support the Non-3GPP attribute subscription. Value: YES,
NO
Column 2: restriction on Non-3GPP wireless access. Wireless Local Area Network
is not allowed. Value: YES, NO
Column 3: restriction on Non-3GPP wireless access. CDMA2000_1X access
network is not allowed. Value: YES, NO
Column 4: restriction on Non-3GPP wireless access. High-speed data packet is not
allowed. Value: YES, NO
Column 5: restriction on Non-3GPP wireless access. Super mobile broadband is not
allowed. Value: YES, NO
Column 6: restriction on Non-3GPP wireless access. Extended high-speed data
packet is not allowed. Value: YES, NO
Column 7: the capability of Non-3GPP Gate Way (GW) for supporting mobile IP.
Value:
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 60, total 68
pages
MIP6_INTEGRATED (1): support Mobile IPv6 integrated scenario bootstrapping functionality
PMIP6_SUPPORTED (2): instruct the Non-3GPP GW to use PMIPV6
IP4_HOA_SUPPORTED (4): instruct the Non-3GPP GW to authorize the UE to use IPV4-HOA
ASSIGN_LOCAL_IP (8): instruct the Non-3GPP GW to assign local IP addresses to subscribers
MIP4_SUPPORTED (16): instruct the Non-3GPP GW to use MIPv4
GTPv2_SUPPORTED (32): instruct the Non-3GPP GW to use GTPv2
Column 8: the timeout period of the next Diameter message in Non-3GPP
access mode. The unit is second. Value range: 14294967295
Note: A single record is made.
16 PS_PDP Service Subscription Data
16.1 PSSER
Format:
PSSER=------
Description: in multiple lines and columns
Column 1: PROFILE_ID, a decimal number of 3 digits
Column 2: PDP context ID. Value range: 150
Column 3: PS APNQOS template ID. Value range: 065534
Column 4: HLR_INDEX, a single value. Value range: 0255
Column 5: PDP other address. Value range: a string of 0 to 39 digits
Column 6: PDP other address indicator. Value:
STATIC: static address
DYNAMIC: dynamic address
Column 7: PDP IPV4 address. Value range: a string of 0 to 39 digits
17 EPS_PDN Service Subscription Data
17.1 EPSSER
Format:
EPSSER=
-
[]
HLR Subscriber Data in Huawei Standard Format INTERNAL
2014-12-11
Page 61, total 68
pages
Description: multiple columns
Column 1: PROFILE_ID, a decimal number of 3 digits
Column 2: PDN context ID. Value range: 150
Column 3: EPS APNQOS template ID. Val