Transcript
How To Make: Wooden Bead Earrings
Materials: 16” of 20 gauge copper wire cut into 2 even pieces, 4 wooden beads-size 5 mm, pair of earwires
Tools: Round Nose Pliers, Wire Cutters
Step 1: Take one part of the wire and bend it like in the photo in order to create three loops
Step 2: Insert one bead onto both wires
Step 3: Bend both wires as shown in the photo to create two big loops. Wire should wrap the green bead. Then cross wires as shown in the photos
Step 4: Create two small loops
Step 5: Insert wooden bead onto both wires, then if you need to even the wires and then, bend them as shown in the photos
Step 6: Repeat all steps to create second earring, then attach the earwires. Your earrings are ready to wear!