How to Make Jewelry with Beads and Wire-A Beaded Ring for Your Index Finger
Summary: Tips for how to make jewelry with beads and wire to compose a delicate
ornament for your index finger, elegant and simple; all you need in the beaded ring are a
12mm gemstone bead and several glass beads.
Beads on your fingers, just as same as those
around the neck or dangle beside the ears,
all are certainly necessary for a fashion lady.
With a little assistance, you will own an
attractive beaded ring by learning how to
make jewelry with beads and wire basically.
It is a great chance for beginners to develop
basic handcraft skills and demonstrate
their individuality.
Materials needed in the beaded ring:
4mm Bicone Swarovski Crystal Bead
8/0 Glass Seed Bead
12mm gemstone bead
Tiger tail wire
Side Cutting Plier
How to make jewelry with beads and wire?
Step1: assemble the 12mm bead with 4mm Swarovski beads
1. Snip a 120cm long wire and string three of
the 4mm Swarovski Crystal beads to center
position; then pass both ends through the
12mm gemstone bead;
2. Add one 4mm Swarovski Crystal bead on
each wire firstly; and then cross through
another one;
3. Hold on either of the wire tips and thread
five 4mm Swarovski Crystal beads on, and
then feed it through the adjoining
Swarovski Crystal bead to make two tips be
exactly symmetrical;
4. Each wire string two 4mm Swarovski
Crystal beads and then cross through
another one.
During the above processes for beaded ring, make sure you have pull all wire tightly.
Step2: keep the central bead of beaded ring in place
Take up two wire tips and add on one 4mm
Swarovski Crystal Bead and three 8/0 seed
beads respectively;
Secondly, cross both tips through the
central 12mm bead;
Finally, add on three 8/0 seed beads and
one 4mm Swarovski Crystal Bead on each
wire and then cross two tips through the
opposite central Swarovski Crystal Bead.
Step3: make the final chain portion with seed beads and wire
Pick up both tips in the semi-finished beaded ring and start to make the connected loops
out of three 8/0 seed beads according to the instructions showcase. In the end, simple hide
the wire tips in the beads by weaving them randomly comply with fundamental beading
methods.
There you have finished this beaded ring right now! Have you figure out the knacks for how
to make jewelry with beads and wire? To be frank, there is, nothing special, except proper
color collocation, advisable adopt of beads Material and size, suitable ease of learning, etc.
well, all in all, good luck .
For more inspiring jewelry making tutorials, please keep an eye on our page at:
http://www.pandahall.com/learning-center