is a metallized holographic film of bi-oriented polypropylene (BOPP)
HM-DPPRO3-I EMISSION 05-SEP-07
USE 13-SEP-07 VERSION 00
PROPERTIES METHODUNIT VALUE
HOLOBOPP1P
HOLOBOPP1P
Thinckness
Yield
Microns Gauge
20 25 3080 100 120
36.844.255.2
0-2 0-2 0-2
120 120 120
0.250.25
0.25 0.250.25 0.25
155 155 155
253 253 253140 140 140
55 55 55
1.0 1.0 1.0
100 100 100
m²/kg
%
ºC, >200g, 60 psi, 0.5 sec
Adim.
New / mm²
%
g/ m² x day
cm³ / cm² x day
Light Transmission
Seal (nonmetallized side)
Elongation at brake
Water vapor permeability
Oxigen permeability
C.O.F.(nonmetallized side)a.Film./ Film. Kineticb.Film. / Metal Kinetic
Strength at brakeMDTD
MDTD
37.7ºC 90% Relative humidity
22.7ºC 0% Relative humidity
■ Excellent level of sliding by the side nonmetallized.
■ Good seal property.■ Good optical properties.
■ Good anti-static property.■ Excellent uniformity and
adhesion to the metal.
■ Excellent adhesion to the lamination.■ Excellent procesability.■ Good rigidity.■ Good barrier properties.■ Conforms FDA requirements.
HOLOMEX
HOLOMEX
D 1003
F88-85
D 1894
D 1894
D 882
D 882
D 882
D 882
F- 1249
D-3985
KEY FEATURES
TechnicalDATA
TYPICAL STRUCTUREMetallized surface holographic microembossing.
PP core.
One side seleable.
Hologramas de México S.A. de C.V. accept no responsibility for results obtained by the application of this information or safety or uitability of our products, either alone or in combination with other products.Users are advised to make their own test to determine het safety and suitability of each product or product combination for their own purposes.
s