MATERIALIZING VISIONS
2505 Millennium Drive, Elgin, IL [email protected] www.bucorp.com 800.638.2520
© 2016, Bohler-Uddeholm Corporation
GLOBAL SERVICES
Specialty Alloys for Aerospace
HEAT TREAMENTBöhler-Uddeholm Thermo-Tech has provided thermal processing solutions to customers across North America since 1991. What distinguish us is the highest level of quality and service at competitive prices. We specialize in the heat treatment of Ni, Ni-Co alloys, Corrosion Resistant PH grades, Creep Resistant steel, Tool Steel and Powder Metallurgical metals.
Accreditations: ISO 9001, AS9100 Capabilities:• High Pressure Vacuum Hardening (15 Bar, 10 Bar, 6 Bar, 5 Bar, 2 Bar)• Sub-Zero treatment• Tempering (Vacuum, Atmosphere)• Stress Relieving (Vacuum, Atmosphere)• Annealing (Vacuum, Atmosphere)• Bright Annealing• Precipitation Hardening (Solution Annealing, Ageing)• Normalizing• Homogenizing• ThermoniteSM (Gaseous Ferritic Nitro-Carburizing and Nitriding)• Specialized Racking / Fixturing• Laboratory Sevices including Metallography and Microhardness• Thermox: Super heated steam Oxidation• Full traceablity and certification
PVD COATINGSeifeler Coatings Technology is a Bohler-Uddeholm company and is the leading provider of the Highest Quality PVD coatings in North America. With the demands put on the Aerospace OEM manufacturers of today, taking advantage of eifeler PVD coatings will go a long way in satisfying those demands. When an increase in production, extended tool life, less down time, and higher tool performance are components in the satisfaction of those demands then eifeler Coatings Technology is your solution provider.
www.eifeler.us
Böhler-Uddeholm markets its products and services in 100 countries on all continents, with wholly owned sales subsidiaries in over 50 markets. To find a sales office near you, please visit our corporate website at www.bohler-uddeholm.com
DFARS: DFARS 252.225.7014: Clause c1, DFARS 225.872Buy American: Austria is listed as a qualifying country in DFARS 225.872 because the United States and Austria signed a reciprocal defense procurement MOU. Austrian material may be used in Buy American applications where the total value of Austrian material is less than 50% of the value of the component.
This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed as a warranty of specific properties of the products described or a warranty for fitness for a particular purpose. Rev February 4, 2016.
Wing lateral panel
V723 250 Mar
Slat track
N700
N701 15-5 PH
17-4 PH
Faster, lighter, farther are terms that define the demands of the Aerospace industry. Bohler produces materials that aerospace engineers need to achieve these demands. We work every day to fulfill these requirements by producing the best quality alloys. Try our materials and learn why they provide the best value for your most critical parts.
FASTER – LIGHTER – FARTHER
N700
N701
17-4 PH
Wing flap track
15-5 PH
Cargo access door
N701
N709
15-5 PH
13-8 Mo
Cargo system
V720
N700
300 Mar
N709
17-4 PH
13-8 Mo
Wing box
N701 15-5 PH
Pylon & engine mount
N701
L718
15-5 PH
Alloy 718
Nose gear door
N701
N709
15-5 PH
13-8 Mo
Landing gear
V132
N701
300M
N709
15-5 PH
13-8 Mo
Door surrounds
N701
N709 13-8 Mo
15-5 PH
Engine
R250R350
L718L303V720T200T552
Alloy A286
Jethete
Waspaloy
Alloy 718
M50
M50 Nil
300 Mar
L625 Alloy 625
OUR MATERIALS
Premium Melted — Ni Based Alloys Standards, Customer Specifications & Approvals
MAIN SYSTEM APPROVALS*
AS9100, ISO9001
• GE AE S1000
• PWA 300
• Rolls Royce SABRE
• Snecma
• MTU
• ITP
• Agusta (acc. AQM-002)
• Airbus Germany (acc. QVA-V06-02-00)
• Airbus UK Ltd. (acc. AUK/SA/001-3)
• BAE Systems (operations) Ltd.
• BAE Systems Regional Aircraft (RALOA/00503/3)
• Böhler Schmiedetechnik
• Boeing (D1-4426)
• Bombardier Aerospace (Code 1013)
• Hawker Beechcraft Corp. (Code QCOO Rev. F)
• Korean Air
• Messier Dowty (SAFRAN Group)
• NHBB
• Westland Helicopters
• SKF Aeroengines France (SNFA)
• GKN Aerospace
• Goodrich Aerostructures
GRADE MARKET GRADE EAF-ESR
MELTING ROUTE STANDARDS
INDUSTRY SPECIFICATIONSVIM
ESRVIM VAR AMS
BÖHLER L718 Alloy 718 • 5662 5663
Snecma DMD 424-22* GE AE B50TF15 A/D/E; C50TF6 P&W PWA-S-5662 CI.2, PWA-S-5663 CI.2Goodrich AMS5662*Boeing D1 4426 (PC694, PC696)* MTU - MTS 1424-1*, MTS 1424-3*
BÖHLER L303 Waspaloy • 5704 5706 5707
Snecma DMD 426-23*
BÖHLER L625 Alloy 625 • 5666 Snecma DMD 436-22* Honeywell EMS 55425P cond B
BÖHLER LHX Alloy X • 5754 Snecma DMD 491-22* GE AE B50TF31-A
BÖHLER L090 Alloy 90 • • 5829 MTU MTS 1042-2*
BÖHLER T200 A286 • 5731, 5732 Snecma DMD 274-22*Turbomeca AMS 5732*Rolls Royce MSRR 6531, MSRR 6532
MAIN LABORATORY APPROVALS*
NADCAP
Chemical, Mechanical, Corrosion Testing, Metallo-graphy and Hardness, Heat Treatment
GE Aero Engines S400
Pratt & Whitney LCS/MCS MCL F17
Snecma Moteurs FAL n°310 acc. PRO 0430
Rolls Royce MSRR 9951
Airbus France MM 049
Boeing D1-4426
MAIN NDT APPROVALS*
NADCAP AMS-STD 2154
GE Aero Engines P3TF34
Pratt & Whitney SIM 14, SIS 45
Snecma Moteurs DMC 0022
Rolls Royce RRP58002
Airbus UK APB 6-5232
Boeing D1-4426
PH Grades Standards, Customer Specifications & Approvals
GRADE MARKET GRADE
MELTING ROUTE STANDARDSINDUSTRY
SPECIFICATIONSEAF EAF
ESREAF VAR
VIM VAR AMS
BÖHLER N700 17-4 PH • • 5622, 5643 Snecma DMB 229-20* P&W CPW-S-5643Airbus ZBF1109, ZBF301438, IPSWL1.4548.4-02Alenia P19X316
BÖHLER N701 15-5 PH • • 5659 Airbus/Eurocopter ASNA 3294, ASNA 3297; ASNA 6116; ABS 5750, ABS 5455, IPS01-04-003-01 Boeing D1 4426 (PC660)* Bombardier EMCM-001-1013 Goodrich AMS5659*Liebherr LAT1-9037
BÖHLER N709 13-8 Mo • 5629 Airbus ZBF1109, ZBF301438, ABS 5442C, ABS 5259, IPS01-04-004-01, IPSWL1.4534.4-01 Liebherr LAT1-9048
BÖHLER T670 W.Nr. 1.4594 • – –
Böhler-Uddeholm offers a wide range of special steels and nonferrous metal alloys.
Below is a survey of our common materials for the aircraft industry. We supply materials according to all current specifications and standards.
* Specific customer approval for a specific size or product range.
* Specific customer approval for a specific size or product range.
APPROVALS
*Approvals by Böhler Edelstahl GmbH & Co KG
OUR MATERIALSOUR MATERIALS
MATERIAL WIDTH INCHES / mm THICKNESS INCHES / mm
BAR rolled round squareflat
0.47-5.91" / 12-150 mm0.59-5.91" / 15-150 mm0.59-2.36" / 15 -60 mm 2.36-7.87" / 60 - 200 mm 3.94-11.81" / 100 - 300 mm
0.20-1.61" / 5 - 41 mm 0.20-3.39" / 5 - 86 mm 0.59-3.15" / 15 - 80 mm
ROLLED WIRErolleddrawn
dia. 0.20-0.53" / dia. 5.0 - 13.5 mm dia. 0.04-0.47" / dia. 1.0 - 12.0 mm
BAR forged round, square flat:
4.33 - 47.24" / 110 - 1200 mm 4.72" minimum / 120 mm minimum 62.99" maximum / 1600 mm maximum Ratio width/thickness maximum 10:1
3.94" minimum / 100 mm minimum 39.37" maximum / 1000 mm maximum
Surface Condition:• blasted/milled/peeled/turned • peeled and polished • belt ground • ground and polished
DIMENSIONS & EXECUTIONS
Aerospace Bearing and Gear Steels
High Performance Aerospace Steels Standards, Customer Specifications & Approvals
GRADE MARKET GRADE
MELTING ROUTE STANDARDSINDUSTRY
SPECIFICATIONSEAF EAF
ESREAF VAR
VIM VAR AMS
BÖHLER E105 9310 • • 6265 Agusta 199-20-005
BÖHLER N360 X30W. Nr. 1.4108
• 5898 FAG FL-LA2486.1SX
BÖHLER N695 440C • • • 5618 5630
Liebherr LAT 1-9123
BÖHLER R100 52100 • • 6444
BÖHLER R250 M50 • 6491 Snecma DMD 119-20* GE AE C50TF56* P&W PWA793*, CPW378*
BÖHLER R350 M50 Nil • 6278 GE AE B50TF211*
GRADE MARKET GRADE
MELTING ROUTE STANDARDSINDUSTRY
SPECIFICATIONSEAF EAF ESR
EAF VAR
VIM VAR
AMS
BÖHLER A750 W. Nr. 1.4546 • 5646 Airbus ZBF1109, ZBF301438
BÖHLER E108 W. Nr. 1.6722 • • Liebherr LAT 1.9043
BÖHLER N352 BÖHLER N352S1
W. Nr. 1.4044 • Airbus ZBF1109, IPSWL 1.4044.6-01
BÖHLER T552 Jethete M152 • • 5719 GE AE C50TF68 Rolls Royce MSRR 6502Snecma DMD 235-20*, DMD 237-20*, DMD 242-20*, Turbomeca AMS 5719*
High Performance Heat Treatable Steels Standards, Customer Specifications & Approvals
GRADE MARKET GRADE
MELTING ROUTE STANDARDSINDUSTRY
SPECIFICATIONSEAF EAF
ESREAF VAR
VIM VAR AMS
BÖHLER V118S1 W. Nr. 1.6745 • Bombardier EMCM-001-1013
BÖHLER V124SC 4340 • • 6414 Agusta 199-20-007 Bombardier EMCM-001-1013
BÖHLER V132 300M • 6257 6419
Liebherr LAT 1-9042
BÖHLER V141 • Bombardier EMCM-001-1013
BÖHLER V145 30CND8 • Airbus ZBF1109, ZBF301438
BÖHLER V354 15CDV6 • • Airbus ZBF1109, ZBF301438
BÖHLER V358 E40CDV12 • •BÖHLER V361 E32CDV13 • 6481 Eurocopter ASNA 6128*
Agusta AMS 6481*
* Specific customer approval for a specific size or product range.
Maraging Steels Standards, Customer Specifications & Approvals
GRADE MARKET GRADE
MELTING ROUTE STANDARDSINDUSTRY
SPECIFICATIONSEAF EAF
ESREAF VAR
VIM VAR AMS
BÖHLER V720 Maraging 300 • 6514
BÖHLER V723 Maraging 250 • Liebherr LAT 1-9018 Messier Dowty MAT102
* Specific customer approval for a specific size or product range.
* Specific customer approval for a specific size or product range.
* Specific customer approval for a specific size or product range.www.bucorp.com