HANSUN ENGINEERING CO., LTD.COMPANY PROFILE
1
General Information
▶ Holding Company - Han Kook Steel Wire Co., Ltd.
▶ Chairmen & CEO – Mr. LEE, JyeHoon
▶ Factory Size : 5,609 m2 ( about 1,700py )
▶ Established Date - 1993. 3. 15
▶ Employees – 73 people
▶ Product Line – Tube Fitting, Pipe Fitting, Forged Fitting
Instrument Valves (Ball, Check, Needle, Manifolds, Integral Block & Bleed,
Monoflange, Valves for CNG, and etcetera)
▶ Supporting Products – Tubing, Tube Clamp, Flanges, Pipes, Gasket, Gauges, and etc.
▶ Capital - 5 Million USD
▶ Home page - http://www.ehansun.co.kr, http://www.slok.co.kr
2
HistoryMar. 1993 Established in Busan Korea as a manufacturer of Instrument Fittings & Valve.
Jul. 2006 Certificate of Qualified Supplier for Shin-kori Nuclear Plant unit 1,2.
Aug. 2006 Supplied forged and tube fittings and valves to Hanaro Nuclear Project.
Dec. 2006 Designated as INNO-BIZ Enterprise.
Dec. 2006 Obtained Certificate of Qualified Supplier for ASME SEC.Ⅲ
Dec. 2009 Obtained Certificate of ASME
Feb. 2010 Obtained Certificate of API
Jun. 2012 M&A by HANKOOK STEEL WIRE Co., LTD. and established HANSUN ENGINEERING Co., LTD.
Jun. 2012 Obtained Type Approval Certificate of ABS and DNV
Jan. 2013 Obtained Quality Certificate of ISO9001/ISO14001/OHSAS18001 from DNV
Aug. 2013 Obtained Upgraded Type Approval Certificate of ABS
Sep. 2013 Obtained Upgraded Type Approval Certificate of DNV
Sep. 2013 Supplied Check Valve to MITSUI Group Engine Division
Jul. 2014 API Type Approval for 6D/6DSS (607/6FA) 3
Organization
CEO
Vice President
Management Planning Div. Sales Div. Technology Div.
Quality Management
Production Div.
management Planning Team Production Management Team
Assembly, Tools Management Team
Production Team
Sales #1 Sales #2 Design TeamR & D
4
Total : 6 Total : 11
Total : 9
Total : 42Total : 5
Total : 2
Total : 33
Total : 7
Total : 6
Total : 5
Factory View (Exterior & Interior)
5
Office Building; Community Center; Entrance; Meeting Room; Conference Room
Factory View (Machining)
6
Machining CuttingDrillingThreadingRimming
Factory View (Warehouse)
7
Raw MaterialForged BodyPartsFinished ProductsStock
Factory View (Laboratory)
8
Quality Management Laboratory
Business Area
9
SHIPBUILDINGOFFSHORE PLANT
REFINERYPETROCHEMICAL POWER PLANT SEMICONDUCTOR
PULP & PAPER, Natural Gas : CNG/NGV, AUTOMOTIVE, OIL & GAS
Products
- ASME B31.3, ASME B1.20.1- Maximize users’ advantage
- Single Ferrule- Double Ferrule
- JIS B2351- DIN2353
Compression Type Tube Fittings
Instrument Pipe/Forged Fitting
Instrument Valves
§ Integral Block & Bleed Valve§ Manifold & Gauge Valve§ Ball & Plug Valve § Check & Relief Valves§ Needle Valves§ Bleed & Purge Valves§ Filter
Supporting Products
Bite Type Tube Fittings
Main Feature of S-Lok
◆ Gaugeability*Strict supervision of 1/1000” tolerance of Nut, Ferrule, Body
- Datum Gauge
◆ Interchangeability* Standardized internationally*Interchangeable with most of products all over the world
◆ Corrosion Resistance* Special heat treatment process for Back Ferrule* Repetitive experiment*Acknowledged the excellence in oxidation prevention worldwide
◆ Consistency* Standardized process from raw material to final
processing* Produce consistent goods maintaining the best
quality
◆ CLEANLINESS
10
37° Flare Tube Fittings
- Joint Industry Council (JIC)- SAE J 514 § Tubing
§ Tube Clamp§ Flanges§ Pipes§ Gasket§ Gauges
Quality System CertificationsNo. Certificate Title Organization Item Issue Expire
1 ISO:9001 International Organization for Standardization DNV ISO : 9001 2013.01. 2015.12.
2 ISO:14001 International Organization for Standardization DNV ISO : 14001 2012.10. 2015.12.
3 OHSAS:18001 Occupational Health & Safety Management System DNV OHSAS : 18001 2012.10. 2015.12.
4 ABS American Bureau of Shipping ABS Manufacturing Assessment 2013.01. 2018.01
5 API Q1 American Petroleum Institute API Q1 2014.10. In Process
No. Industry Certificate Title Organization Item Issue Expire
1 General GOST-R GOST-R Certificate RUSSIA S-LOK, BITE, DIN, Valve 2012.08 2016.02
2 Petrochemical & Subsea API American Petroleum Institute API 6D, 6A/6DSS, 17D(Subsea)
607/6FA (Fire Protection) 2014.09. 2017.09
3
Marine
&
Offshore
DNV Det Norske Veritas DNV S-LOK, BITE, DIN 2014.02 2018.06
4 ABS American Bureau of Shipping ABS S-LOK, BITE, DIN 2013.08 2018.08
5 ABS American Bureau of Shipping ABS Valves 2015.01 In Process
6 KR Korean Register of shipping KR S-LOK, BITE, DIN 2014.01 2019.01
7 NK NIPPON KAIJI KYOKAI Class NK S-LOK, BITE, DIN 2014.07 2019.07
8 GL Germanischer Lloyd GL S-LOK, BITE, DIN 2014.11 In Process
9 CCS China Classification Society CCS S-LOK, BITE, DIN 2014.10 2019.10
10 LLOYD Lloyd register of shipping LLOYD S-LOK, BITE, DIN 2014.12 In Process
11 BV Bureau Veritas BV S-LOK, BITE, DIN 2014.11 In Process
12 Natural GasECE R110ISO 15500
NGV/CSA 3.1CNG/NGV Type Approval - E Mark & DOC KIWA
S-LOK Fittings, Filters, Manual Ball Valves 3 types, Check, Purge & Bleed Valve
2014.10 Renewed Annually
11
Product Type Approval Certificates
Quality System Certifications
ABSOHSAS:18001ISO:14001ISO:9001
12
Type Approval Certifications
13
DIN TYPEJIS TYPELOK TYPE
DIN TYPEJIS TYPELOK TYPE
VALVE FITTING
DNV
ABS
GHOST-R
DIN TYPEJIS TYPELOK TYPE
KR13
Type Approval Certifications
NK
6DSS
6D
API
14
Intermix & Interchangeability test results
SWAGELOK GYROLOK
15
Products - Fittings
16
S-LOK Tube Fittings
∙ Available in Size: 1/16 - 2 in. and 2mm-
50mm
∙ Compression type double ferrule fittings
∙ Roll threaded construction
∙ Available variety of configurations
∙ Excellent vibration resistance/ Leak-proof
sealing
∙ Gauge ability and retighten
∙ Stainless steel, Brass, Carbon steel, Alloy 400
Instrument Thread Pipe Fitting
∙ Size range from 1/8 to 2 inch piping.
∙ Stainless steel and Carbon steel
∙ NPT, ISO/BSP, and SAE threads
∙ According to ASME B31.1 & B31.3
∙ Rolled male threads
∙ Male threads are protected with cap
∙ Excellent threads constructed to ensure
leak-
proof & reliable systems
BITE Type Tube Fittings (JIS B2351)
∙ According to JIS B2351 standard
∙ Single cutting ring design
∙ Stainless steel and Carbon steel
∙ Metric tube O.D and pipe O.D
BITE Type Tube Fittings (DIN2353)
∙ According to DIN2353 standard
∙ Two cutting edge single ring design
∙ Stainless steel and Carbon steel
∙ Metric tube O.D
Hydraulic Pipe Fitting
∙ Socket welding & Screwed type
∙ Pressure class 2000, 3000, 6000, 9000
fittings
to ANSI and JIS standards
∙ Materials
∙ Carbon steel : A105, A234. JIS G4051 S20C –
S45C
∙ Stainless steel : ASTM A182 F304, F316
JIS G4303 S304, S316
17
SNV50Integral Bonnet Needle Valves
∙ Pressure rating up to 5000psi (344bar) @
100°F(38°C)
∙ Temperature rating: -65°F(-54°C) to 450°F(232°C)
∙ Stainless steel, Brass, and Alloy
∙ In-Line or Angle pattern
∙ Vee stem, Regulating stem, Soft seat
∙ Sizes: S-LOK 1/8 to 3/4 in.
Pipe Thread 1/8 to 1/2 in.
SNV60Integral Bonnet Bar Stock Needle Valves
∙ Pressure rating up to 6000psi (413bar) @
100°F(38°C)
∙ Temperature rating: -65°F(-54°C) to
450°F(232°C)
∙ Stainless steel, Alloy
∙ In-Line or Angle pattern
∙ Vee stem, Regulating stem, Soft seat
∙ Sizes : S-LOK 1/4 to 1/2 in.
Pipe Thread 1/4 to 3/4 in.
Products – Needle Valves
SUNV60Union Bonnet Needle Valves
∙ Pressure rating up to 6000psi (413bar) @
100°F(38°F)
∙ Temperature rating: up to 572°F(300°C) with
PTFE packing, up to 1200°F(649°C) with Grafoil
packing.
∙ Stainless steel, optional Alloy 20. and Alloy C276
∙ Non-rotating globe type stem tip.
∙ Sizes: S-LOK 1/8 to 1 in.
Pipe Thread 1/8 to 1 in
SW : ¼ to ½ in.
SNV100High Pressure Needle Valves
∙ Pressure rating up to 10000psi (689bar) @
100°F(38°C)
∙ Temperature rating : -65°F(-54°C) to 450°F(232°C)
∙ Stainless steel
∙ PTFE packing on stem for leak tight seal and long
life cycle
∙ Sizes : S-LOK 1/8 to 1 in.
Pipe Thread 1/4 to 3/4 in.
18
SBV10Bar Stock Ball Valves
·Pressure rating up to 1000psi (69bar) @
100℉(38℃)
·Temperature rating : -65℉(-54℃) to
400℉(205℃)
·Stainless steel, Brass
·Butterfly handle optional
·Sizes : S-LOK 1/4 to 1 in.
Pipe Thread 1/4 to 1 in.
SBV30One-Piece Instrumentation Ball Valves
·Pressure rating up to 3000psi (206bar) @
100℉(38℃)
·Temperature rating : 50℉(10℃) to
150℉(65℃)
·Stainless steel, Brass
·Sealing without system pressure
·Sizes : S-LOK 1/16 to 3/4 in.
Pipe Thread 1/8 to 1/2 in.
Products – Ball Valves
SBV60High Pressure Ball Valves·Pressure rating up to 10.000psi (689bar)@
100℉(38℃)
·Temperature rating :
-22℉(-30℃) to 265℉(130℃) with PVDF Seat
-65℉(-54℃) to 500℉(260℃) with PEEK Seat
·Stainless steel
·Panel mounting and locking device are available
·2-way, 3-way
·Sizes : S-LOK 1/4 to 1 in.
Pipe Thread 1/4 to 1 in.
·CNG/NGV available
SFBV60Forged High Pressure Ball Valves
·Pressure rating up to 6000psi
(413bar)@100℉(38℃)
·Temperature rating :
-65℉(-54℃) to 446℉(230℃)
·Stainless steel / ·Easy replacement ball seats
·2-WAY, 3-WAY
·Sizes : S-LOK 1/8 to 3/4 in.
Pipe Thread 1/4 to 1/2 in.
·CNG/NGV available
19
STBV60Trunnion Ball Valves
∙ Pressure rating up to 6.000psi
(689bar)@100°F(38°C)
∙ Temperature rating :
∙ 65°F(-54°C) to 500°F(260°C) with PEEK
Seat
∙ Stainless steel
∙ 2-way, 3-way
∙ Sizes : S-LOK 1/4 to 1/2 in.
Pipe Thread 1/8 to 1/2 in.
·CNG/NGV available
SDBV30Hydraulic Ball Valves for DIN Standard
∙ Pressure rating up to 7200psi (500bar)@
100°F(38°C)
∙ Temperature rating : -4°F(-20°C) to
210°F(100°C)
∙ Stainless steel
∙ Sizes : Pipe Thread 1/4 to 2 in.
Products – Ball Valves
SMDBV60Manifold Double Ball Valve
∙ Pressure rating up to 6,000psi (413bar)@70°F
(21°C)
∙ Temperature rating :
∙ -4°F(-20°C) to 212°F(100°C) with POM seat and
NBR
Seal standard
Stainless steel
Sizes : Pipe Thread 1/4
SPV30Plug Valves
∙ Pressure rating up to 3000psi (206bar)
@ 100°F(38°C)
∙ Temperature rating : -10°F(-23°C) to
400°F(204°C)
∙ Stainless steel, Brass
∙ Flow throttling
∙ Easy replacement plug and o-ring
∙ Sizes : S-LOK 1/8 to 1/2 in.
∙ Pipe Thread 1/8 to 1/2 in.
20
SCV30Poppet Check Valves
∙ Pressure rating up to 3000psi (206bar)@100°F(38°C)
∙ Temperature rating : -10°F(-23°C) to 375°F(191°C)
∙ Stainless steel, Brass
∙ Cracking pressure : 1/3psig(0.02barg) to 100psig
(6.89barg)
∙ Sizes : S-LOK 1/8 to 1 in.
Pipe Thread 1/8 to 1 in.
SCP30One piece Check Valves
∙ Pressure rating up to 3000psi
(206bar)@100°F(38°C)
∙ Temperature rating : -10°F(-23°C) to
375°F(191°C)
∙ Stainless steel, Brass
∙ Cracking pressure : 1/3psig(0.02barg) to
50psig (3.45barg)
∙ Sizes : Pipe Thread 1/4 to 1/2 in.
SCA30Adjustable Check Valves
∙ Pressure rating up to 3000psi
(206bar)@100°F(38°C)
∙ Temperature rating : -10°F(-23°C) to
375°F(191°C)
∙ Stainless steel, Brass
∙ Cracking pressure : 3psig(0.2barg) to 600psig
(41.3barg)
∙ Sizes : Pipe Thread 1/4 to 1/2 in.
SCH60High pressure Check Valves
∙ Pressure rating up to 6000psi
(413bar)@100°F(38°C)
∙ Temperature rating : -10°F (-23°C) to 375°F
(191°C)
∙ Stainless steel
∙ Cracking pressure : 1/3psig(0.02barg) to 25psig
(1.7barg)
∙ Sizes : S-LOK 1/8 to 1 in.
Pipe Thread 1/4 to 1 in.
·CNG/NGV available
Products – Check Valves
Products – Purge, Relief, Bleed Valves, Filters
21
SRV30/60Relief Valves
∙ Pressure rating up to 6000psi
(413bar)@100°F(38°C)
∙ Temperature rating : -10°F(-23°C) to
400°F(204°)
Stainless steel
∙ Cracking pressure :
∙ SRV30 : 10psig(0.69barg) to
250psig(17.25barg)
∙ SRV60 : 250psig(17.5barg) to
6000psig(413barg)
∙ Sizes : S-LOK 1/4 to 1/2 in.
Pipe Thread 1/4 to 1/2 in.
SPUVPurge Valves
∙ Pressure rating up to 4,000psi(275bar)@
100°F(38°C)
∙ Temperature rating : -65°F(-54°C) to
600°F( 315°C)
∙ Knurled cap is crimped to valve body to
prevent an accidental removal of the body
∙ Stainless Steel, Carbon Steel, Brass
∙ Stainless Steel
∙ Sizes : Pipe Thread 1/8 to 1/2 in.
SBLVBleed Valves
∙ Pressure rating up to 10000psi(689bar)@
100°F(38°C)
∙ Temperature rating :-65°F(-54°C) to
850°F(454°C)
∙ Stainless steel
∙ Sizes : Male pipe thread : 1/8 - 1/2 in.
·CNG/NGV available
SFI30/SFT60Filters
Pressure rating up to 3000psi(206bar),
6000psi(413bar)
Gas and liquid filtration
Micron filtering ranges :
0.5, 2, 7, 15, 60 and 90 microns
Replaceable sintered elements
Stainless steel, Brass
Sizes : S-LOK 1/8 to 1/2 in.
Pipe Thread 1/8 to 1/2 in.
·CNG/NGV available
22
SMV SeriesManifolds Valves
Pressure rating up to 6000psi (413bar) @
100°F(38°C)
Temperature rating : -65°F(-54°C) to
973°F(523°C) with Grafoil packing
Stainless steel
2V, 3V and 5V as standard
Remote or direct mounting
Non-rotating globe stem tip
SGV60, SGRV60 Gauge Root Valves
Pressure rating up to 6000psi (413bar) @
100°F(38°C)
Temperature rating : -65°F(-54°C) to
450°F(232°C)
Stainless steel
Non-rotating globe stem tip
Grafoil packing for high temperature available
Standard gauge valve, longer body gauge root
valve
and extended 4" long body
Multi-port designs and Block and Bleed style
Sizes : Pipe Thread 1/2 to 3/4 in.
SDB, SSB SeriesDouble Block & Bleed Valves
Class 150 to Class2500 to ASME B16.5
Temperature rating :
PEEK seat : -65°F(-54°C) to
400°F(205°C)
PCTFE seat : -22°F(-30°C) to 356°F
(180°C)
Stainless steel, Duplex, A105
Saving on space and weight
Easy installation and maintenance
Fire safety designed to API 607/6 FA
Flange Sizes: 1/2 to - 2 in.(DN15-
DN50)
Products – Manifolds, Gauge Root, DBB, Rising Plug Valve
SRPV30Rising Plug Valves
∙ Pressure rating up to 6000psi (413bar) @
100°F(38°C)
∙ Temperature rating : -20°F(-29°C) to
250°F(121°C)
∙ Stainless steel
∙ Replaceable soft seat
∙ Delrin, PEEK or PCTFE seats
∙ Non-rotating globe type stem tip
∙ Sizes : Pipe Thread 1/4 to 3/4 in.
23
Products – 3Way Test Cock Valve / Condensate Pot / Tubing / Mono Flange
STV50 Series3Way Test Cock Valve
Pressure Rating up to 5000psi (344bar)
@100°F(38°C)
Temperature rating :
PTFE packing : -65°F(-54°C) to 450°F(232°C)
PEEK packing : -65°F(-54°C) to 600°F(315°C)
Stainless steel and Brass
CDP Series Condensate Pot
High ~ Low Pressure Rating Options
Pipe 3” & 4”
Various types of shape A, B, C, C, E, F & End
Connectors
HanSun S-LOK ended Outlets
Available with a wide range of HanSun
Needle & Ball Valve
Stainless Steel 316 or Carbon Steel
Tubing
Standard for ASTM A269 or A213 or equivalentRecommended hardness : HRb80 or less (Stainless Steel 316)Full annealed Stainless steel high quality Seamless steel TubeWorking Pressure are based on allowable value of 20,000psi according to ASME B31.3Safety Factor = 3.75 : 1 considering ultimate tensile Strength 75,000psiTo determine working Pressure of ASME31.1 multiply the ASME31.3 rating by 0.94Size : 1/16-2 in, 3mm-38mm
SMNF SeriesMonoflanges
Class 150 to Class2500 to ASME B16.5Temperature rating :PTFE packing : -65°F(-54°C) to 400°F(204°C)Graphite packing : -65°F(-54°C) to 850°F(454°C)Stainless steelFlange Sizes : 1/2 - 2 in.(DN15-DN50)
FacilitiesNAME SIZE Q’T
Y
ProductionEquipment
CNC LATHEAuto CNC LATHEMCTThread Rolling MachineAuto Bend SawLaser Marking MachineRoll MarkingPress MarkingAuto Press MarkingDrilling Machine
6”, 8” & 10”6”800 kgf7 ton & 10 ton300 ~450
20W
211114511211
Testing & Inspection Equipment
SpectrometerUniversal Test MachineCharpy Impact TesterBrinell / Rockwel / Vickers Hardness TesterContour Measureing InstrumentSurface Roughness Measure TesterHigh & Low Pressure Bursting TesterHigh & Low Vibration with Impulse TesterProfile ProjectorElectron MicroscopeAir Driven Pump (Hydraulic Tester) & Vacuum PumpPolishing MachineMounting PressGranite Surface Plate
50 ton
4,000 bar & 1,500 bar1,500 bar & 700 bar
11131122112111
24
3. Material Cutting 4. Machining 5. Process Inspection 6. De-burring
→→ →
Gauge Inspection Dimension Inspection
25
1. Raw MaterialReception 2. Raw Material Inspection
→
Dimension Hardness Mechanical Strength
Chemical Composition
Manufacturing & Inspection Process
7. Heat Treatment / Coating / Cleaning 8. Incoming Inspection
→
Ferrule & SleeveHeat Treatment Coating Cleaning Visual Back Ferrule &
Sleeve Hardness
9. Assembly RoomStorage 10. Assembly 11. Inspection & Test 12. Packing
→→ →
Gas Leakage TestFor Valve
Assembly Inspection
26
Manufacturing & Inspection Process
Location & Networks
Head Office : Factory - Korea
27
Global Availability / Local Services
Exclusive Distributor
North America : S-LOK NA, Germany : S-LOK GmbH,
General Distributor
Asia : Australia, China, India, Indonesia, Malaysia, Taiwan, Thailand, Vietnam, Japan, Singapore
Europe : Italy, Denmark, Spain, Germany, Azerbaijan, Russia, Hungary
Middle East : Egypt, Iran, Iraq, Kuwait, Pakistan, Saudi Arabia, Turkey, UAE
Main Clients – Domestic & Overseas
Domestic
HYUNDAI Engineering & Construction
SAMSUNG C&T and SAMSUNG E&C
DAEWOO E&C
GS E&C
SK E&C
Doosan Heavy Industries
Daelim E&C
Korea Hydro and Nuclear Power
POSCO E&C
DSME (Daewoo Shipbuilding & Marine Engineering)
HYUNDAI Heavy Industry
Overseas Country
Mitsui Engineering & Shipbuilding Japan
Consilium Marine & Safety AB Sweden
Gates Engineering & Services Singapore
S-LOK GmbH Germany
National Iranian Oil Company Iran
S-LOK, NA, INC USA
SUI SOUTHERN GAS COMPANY PAKISTAN
COSCO SHIPYARD GROUP CO.,LTD
China
Mitsubishi Heavy Industries, Ltd. Japan
Tierre Group S.P.A. Italy
28
Supply Reference List
29
Market Customer Country Product Delivery Remark / EPC ( PJT )
Nuclear Plant
Doosan Heavy Ind. Co KOREA Tube Fittings 2006/Mar
Nuclear Power / Hanaro KOREA Forged & Instrument Valve, Tube & Forged Fittings 2006/Aug
Hyundai Construction KOREA Pipe, Fittings, Valves 2009 Shingori #1,2,3,4
Hyundai Construction KOREA Pipe, Fittings, Valves 2009 Shinwolsung #1,2
Hyundai Construction KOREA Pipe, Fittings, Valves 2009 Yungkwang
Hyundai Construction KOREA Pipe, Fittings, Valves 2009 Wooljin
Sung Il Sim KOREA Welded Pipe, Fittings 2010/Jan Singori #3,4
Hyundai Construction KOREA Fittings, Pipe 2010/Jan Singori #3,4
Doosan Heavy Ind. Co KOREA Welded Pipe, Fittings 2010/Jan Singori #3,4
SamSung KOREA Welded Pipe, Fittings 2010/Jan Sinwolsung #1,2
Steel MillKaneshiro Ironworks LT Japan Pipe Fittings 2002/Aug
POSCO China Pipe Fittings, Clamp & Flanges 2004/May
Semiconductor
Dae Sung Piping KOREA Pipe Fittings 2004/Dec
Hoking Valve Taiwan Tube Fittings 2009
Weijuen Taiwan Tube Fittings & Valves 2009
LG Innotek, Hynix KOREA Tube Fittings & Valves 2010/Jul
Plant
Doosan Heavy Ind. Co / Youngwol KOREA Tube Fittings & Pipe 2010/Apr
DaeWoo Construction / Lotte Const. / Pangyo KOREA Tube Fittings & Pipe 2010/Apr
Omart Israel Pipe Fittings/BW Fittings 2010/Oct
Corner Stone China Tube Fittings & Valves 2009 CNG Plant
SamYang Arca. KOREA Tube Fittings & Tube 2010/Aug Pajoo & Youngwool
HSPNF / STX & DOOSAN HEAVY INST. KOREA Tube Fittings 2014/July Samcheok green power #1/#2
Pressure Vessel Osaka High Pressure Japan Pipe Fittings 2003/Mar
Environmental Doosan Mecatec KOREA Pipe Fittings & Support materials 2003/Jun
30
Ship Building
Hyundai Heavy Ind. Co KOREA Pipe Fittings 2004/Jan
Dae Sung Piping China Pipe Fittings, Clamp & Flanges 2005/Sep
CVIT Vietnam BW, Tube, Fittings 2009
STX Heavy Industries China Tube Fittings & Valves 2009
SPP Heavy Industries Co. Ltd KOREA Tube Fittings & Valves 2010
STX Heavy Industries KOREA Tube Fittings & Valves 2010
Euroliege China Tube Fittings & Valves 2011/Jun
Minh Lap Vietnam Tube Fittings 2012/Mar Sigon Shipyard / Vard
DSME KOREA Tube Fittings & Valves 2013/May Test equipment
Mitsui Engineering & Shipbuilding Japan Valves ( Non Return Check Valves ) 2013~2014 Hyundai (Mipo,Samho ) Heavy ind.
HYTUBE Australia Tube Fittings 2012~2014 AUSTAL Shipyard
Consilium Marine & Safety AB Sweden Valves for Gas Sampling System 2013~2014
Pulp & PaperPT. Valve Automation Indonesia Tube Fittings, Clamp 2012/Jul
SICOM Engineering & Services Pte Ltd Singapore Tube Fittings 2012/Sep
Industrial
Cal Pipe USA Tube Fittings 2009
Yamato Japan Forged Fittings 2009
Eilaf Engineering Egypt Tube Fittings 2009~2014
Tierre Group Italy Tube Fittings & Valves 2012~2014
Vulcan Engineering USA Tube Fittings 2013~2014
Transhose Australia Tube Fittings, Pipe 2011/Apr
Rüeger S.A. Swiss Tube Fittings 2013~2014
Rüeger Beijing China Tube Fittings 2014~
Kor Fitting kft Hungary Tube Fittings, Valves 2012-2014 Slovak Transit
Market Customer Country Product Delivery Remark / EPC ( PJT )
Automotive Plant KIA Motors China Tube Fittings/Valves 2013/Apr Painting Line
Supply Reference List
31
Hydraulic System
Transaction Co., Ltd. Japan Hose Fittings 2003/Jun
Angst+Pfister AG Swiss Tube Fittings 2009
Fittings Specialisten Denmark Tube Fittings 2009
Source Hose & Industrial Canada Tube Fittings 2009~2014
Tower Crane Sea Jin Ind KOREA Tube Fittings & Pipe Fittings 2003/Aug
Clean Room BP Teck KOREA Pipe Fittings 2004/Feb
OffshoreJokwang Piping Iran Tube & Pipe Fittings, Clamp & Flanges 2005/May
Hyundai Heavy Ind Co (Gorgon project) KOREA Tube fitting (Bite) 2013/May
Heat Exchanger KHE KOREA Tube Fittings 2005/Nov
Oil & Gas
Mitsubishi Heavy Industry Japan Valves 2014
S.S.B.T.E Saudi Flanges, Tube Fittings & Valves 2009
SUI SOUTHERN GAS COMPANY Pakistan Tubing, Tube Fittings & Valves 2013~2014
CV.INTI PERSADA Indonesia Valves ( Manifold ) 2014 PGN
Saehan Sayal Co. Iran Tube Fittings & Valves 2009 NIOC
EPC Well Gathering System Iraq Tube Fittings/Cylinder/Flange/Flexible Hose 2013/July
Hebei Langfu Trading China Valves 2013~2014 Handan XingXing Heavy Machinery
PetrochemicalITE Netherland Instrument Valves 2009
NIOC Iran Tube Fittings & Valves 2009
Military Gates Engineering & Services Singapore Tube Fittings 2009~2014 ST Engineering (Singapore)
ConstructionCTCI Taiwan Alloy steel wrought fittings 2009 Central Utility Project 1 - Phase 6
GS Construction Korea Condensate Pot 2014
Water Treatment FS Specialist Sdn Malaysia Tube Fittings 2013/Aug Water Mist System (NTT Data Center )
Market Customer Country Product Delivery Remark / EPC ( PJT )
Supply Reference List
International
China DK Kim [email protected]
Middle East Freddy Park [email protected]
America, Europe David Kim [email protected]
Asia DA Kim [email protected]
Domestic
Busan Head Office International Sales [email protected]
Busan Head Office Internal Sales [email protected]
Seoul Sales Office Jae Min Kang [email protected]
27 Noksansandan361-Ro, Gangseo-Gu
(Songjeong-Dong), Busan, Korea
Tel : +82-51-899-6700, Fax : +82-51-899-6799
E-Mail : [email protected]
Website : www.ehansun.co.kr, www.slok.co.kr
32