Foundations in Microbiology
Chapter
11
PowerPoint to accompany
Fifth Edition
Talaro
Copyright The McGraw-Hill Companies, Inc. Permission required for reproduction or display.
2
Physical and Chemical Control of Microbes
Chapter 11
Control of microbes
Physical and chemical methods to destroy or reduce microbes in a given
area
Physical – heat and radiation
Chemical – disinfectants and antiseptics
4
Relative resistance of microbes• Highest resistance
– Bacterial endospores
• Moderate resistance– Bacteria with resistant vegetative cells:
• Pseudomonas sp.• Mycobacterium tuberculosis• Staphylococcus aureus
– Protozoan cysts
– Some viruses (naked more resistant than enveloped)
• Least resistance– most bacterial vegetative cells– Fungal spores– Enveloped viruses– Yeast– Protozoan trophozoites
5
Terms
• Decontamination - The destruction, removal, or reduction in number of undesirable microbes
• Sepsis - The growth of microorganisms in the tissues
• Asepsis - Techniques that prevent the entry of microorganisms into sterile tissues
• Antiseptic - Chemicals applied to body surfaces to destroy or inhibit vegetative pathogens
6
Terms• Sterilization – a process that destroys all viable
microbes, including viruses & endospores (autoclave and radiation)
• Disinfection – a physical or chemical agent that destroys vegetative pathogens, not endospores, on inanimate objects (bleach, boiling water)
• Sanitization – any cleansing technique that mechanically removes microbes (soaps and detergents)
• Degermation – reduces the number of microbes from living tissue (surgical hand scrub)
Fig. 11.1
8
Microbial death
• Involves permanent loss of reproductive capability, even under optimum growth conditions
9
Factors that influence action of antimicrobial agents:
1. Number of microbes2. Nature of microbes in the population (young cells die
more quickly)
3. Temperature & pH of environment4. Concentration or dosage of agent5. Mode of action of the agent6. Presence of solvents, organic matter, or
inhibitors
10
Factors that influence the rate at which microbes are killed by antimicrobial agent
11
Cellular targets of control
1. Cell wall
2. Cell membrane
3. Cellular synthetic processes (DNA, RNA)
4. Proteins
12
Surfactants inserting into the lipid bilayer, alter permeability, cause leakage both in and out of the cell
13
a) The native state is maintained by bonds that create active sites to fit the substrate. Agents denature by breaking 2o and 3o bonds
c) Random bonding and incorrect folding
14
Practical concerns• Does the application require sterilization? Or is
disinfection adequate?• Is the item to be reused?• Can the item withstand heat, pressure, radiation, or
chemicals?• Is the method suitable?• Will the agent penetrate to the necessary extent?• Is the method cost- and labor-efficient & is it safe?
Selecting a workable method of microbial control
15
Methods of Physical Control
1. Heat
2. Cold temperatures
3. Desiccation
4. Radiation
5. Filtration
16
1. HeatMoist heat – use of hot water or steam• Mode of action – denaturation of proteins, destruction of
membranes & DNA• sterilization • autoclave 15 psi/121oC/10-40min (raise the temp of
steam by increasing the pressure)• intermittent sterilization – unpressurized steam at 100oC
30-60 min for 3 days• disinfection• Pasteurization <100oC for seconds; kills Salmonella,
Listeria & overall microbe count• Boiling at 100oC for 30 minutes to destroy non-spore-
forming pathogens
17
Sterilization using steam under pressure
The Autoclave
18
Dry heat using higher temperatures than moist heat, can also sterilize, less efficient that moist heat
• incineration – 600-1200oC combusts & dehydrates cells (limited to metals, ex. loop)
• dry ovens – 150-180oC- coagulate proteins, not suitable for plastics/paper
19
Dry heat- Incineration
Shield prevents splattering of microbial samples during flaming
20
2. Cold temperatures
• Microbistatic – slows the growth of microbes
• refrigeration 0-15oC & freezing <0oC
• Pathogens can survive several months
• used to preserve food, media and cultures
• -70oC to -135oC can preserve cultures of bacteria and viruses for long periods of time
21
3. Desiccation
• gradual removal of water from cells, leads to metabolic inhibition
• not effective microbial control – many cells retain ability to grow when water is reintroduced
• A valuable way to preserve foods
22
4. Radiation
Defined as energy emitted from atomic activities and dispersed at high velocity through matter or space
23
4. Radiation
Ionizing radiation – ejects orbital electron from an atom causing ions to form
– Deep penetrating power, breaks DNA
– gamma rays, X-rays, cathode rays
– used to sterilize medical supplies & food products
24
4. Radiation
Nonionizing radiation: Ultraviolet Rays – excites atoms by raising them to a higher energy state, leads to the formation of abnormal bonds
– Little penetrating power to sterilize air, water and solid surfaces
– UV light creates thymine pyrimidines dimers, which interfere with replication
25
Dislodges electron from molecules
Excites electron-abnormal bonds form
A solid barrier cannot be penetrated by nonionizing radiation
26
Formation of pyrimidine dimers by the action of UV radiation
Pyrimidine bases=Thymine and cystosine
Dimers prevent that segment from correctly replicating or transcribing
27
An Ultraviolet (UV) treatment system for disinfection of water
28
5. Filtration
• physical removal of microbes by passing a gas or liquid through filter
• used to sterilize heat sensitive liquids & air in hospital isolation units & industrial clean rooms
29
Filtration
Scanning electron micrograph of filter showing relative size of pores and bacteria trapped on surface (8um to 0.2um)
30
Chemical control
1. Halogens
2. Phenolics
3. Chlorhexidine
4. Alcohols
5. Hydrogen peroxide
6. Detergents & soaps
7. Heavy metals
8. Aldehydes
31
1. Halogens(used for disinfection for 200 yrs)
• Chlorine – Cl2, hypochlorites (chlorine bleach), chloramines– Denaturation of proteins by disrupting disulfide bonds– Can be sporicidal
• Iodine - I2, iodophors (Betadine)– Denature proteins– Can be sporicidal– Milder medical & dental degerming agents, disinfectants,
ointments– Less susceptible to inactivation by organic material
32
2. Phenolics
• Phenolics-one or more aromatic carbon rings with additional functional groups
• Disrupt cell membranes & precipitating proteins; bactericidal, fungicidal, virucidal, not sporicidal– Lysol – triclosan- antibacterial additive to soaps
33
All contain basic aromatic ring, but differ in the types of additional compounds
34
3. Chlorhexidine• Hibiclens, Hibitane
• A surfactant & protein denaturant with broad microbicidal properties
• Not sporicidal
• Used as skin degerming agents for preoperative scrubs, skin cleaning & burns
• Mildness, low toxicity and rapid action
35
4. Alcohols• Colorless hydrocarbons with one or more -OH
functional groups• Ethyl or isopropyl alcohol in solutions of 50-95%. At
50% or greater concentration dissolves cell membrane lipids– 70% proteins coagulate– 100% dehydrates
• Act as surfactants dissolving membrane lipids and coagulating proteins of vegetative bacterial cells, fungi, and enveloped viruses
• Skin degerming agent. Not sporicidal
36
5. Hydrogen peroxide (H2O2)
• A colorless, caustic liquid that decomposes in the presence of light into water and oxygen gas
• Weak (3%) to strong (25%)• Produce highly reactive hydroxyl-free radicals that
damage protein & DNA while also decomposing to O2 gas – toxic to anaerobes
• Strong solutions are sporicidal
37
6. Detergents & soaps
• Quaternary ammonia cpds act as surfactants that alter membrane permeability of some bacteria & fungi– Positively charged detergent
– Not sporicidal
• Soaps- mechanically remove soil and grease containing microbes– Alkaline cmpds made by combining the fatty acids in oils
with sodium or potassium salts
– Weak microbicides
38
Detergents are polar molecules with charged head and uncharged tail
A common quarternary ammonium detergent
39
Graph showing effects of hand scrubbing
40
7. Heavy metals-(relatively high atomic weight: mercury, silver, and gold)
• Solutions of silver & mercury kill vegetative cells in low concentrations by inactivating proteins
• Oligodynamic action-the property of having antimicrobial effects in exceedingly sm. amts
• Not sporicidal• Bind to functional groups of proteins and
inactivate them
41
A pour plate inoculated with saliva
Contains silver and mercury
42
8. Aldehydes
• Organic substances bearing a reducing functional group on terminal carbon
• Glutaraldehyde & formaldehyde kill by alkylating protein & DNA
• glutaraldehyde in 2% solution (Cidex) used as sterilant for heat sensitive instruments, high-level disinfectant
• formaldehyde - disinfectant, preservative, toxicity limits use
43
Gases & aerosols
• Ethylene oxide, propylene oxide, betapropiolactone & chlorine dioxide
• Strong alkylating agents, sporicidal• Sterilizing inanimates• Ethylene oxide is the gas used in chemiclaves• Reactions with functional groups of DNA and
proteins, therefore, blocks both DNA replication and enzymatic actions
44
Sterilization Using Gas
An automatic ethylene oxide (ETO) sterilizer. Machine equipped with gas canisters containing ETO and carbon dioxide, chamber to hold items, and ways to evacuate and introduce air
Table 11.7
Fig. 11.1