![Page 1: FLAT TRACK SLIDING BARN DOOR HARDWARE Face Mount ... Door hardware... · 4 Prep Door for Hangers & Floor Guide Drill Holes in door for hanger bolt by using a 19/32” bit. 19/32 [15.1]](https://reader036.vdocuments.site/reader036/viewer/2022062919/5ee4235aad6a402d666d7977/html5/thumbnails/1.jpg)
FLAT TRACK SLIDING BARN DOOR HARDWAREFace Mount Installation Instructions
![Page 2: FLAT TRACK SLIDING BARN DOOR HARDWARE Face Mount ... Door hardware... · 4 Prep Door for Hangers & Floor Guide Drill Holes in door for hanger bolt by using a 19/32” bit. 19/32 [15.1]](https://reader036.vdocuments.site/reader036/viewer/2022062919/5ee4235aad6a402d666d7977/html5/thumbnails/2.jpg)
19/32” 11/32” 19/64” 1-1/2”
5/16” Allen
Wrench
7/32” Allen
Wrench
3/32” Allen
Wrench
General Info
ToolsRequired
The wall or structure that your system will be mounted on must be designed to support a maximum door weight of 400 lbs.
Ensure that door panels are constructed with solid, structural material.
Do not install directly into drywall. Must be installed into wall blocking or header board.
Check with your contractor and/or your city of residence to confirm accordance with local building codes.
For best results, seek qualified building professionals for installation.
-
-
-
-
-
![Page 3: FLAT TRACK SLIDING BARN DOOR HARDWARE Face Mount ... Door hardware... · 4 Prep Door for Hangers & Floor Guide Drill Holes in door for hanger bolt by using a 19/32” bit. 19/32 [15.1]](https://reader036.vdocuments.site/reader036/viewer/2022062919/5ee4235aad6a402d666d7977/html5/thumbnails/3.jpg)
Hangers
Hanger Bolts
Stops
Anti-jumps Floor Guide
Track
Track Fasteners Post & SpacersDrywallAnti-crushes
What’s in the box
Splice Kit (Required for 10’, 13’ or 16’ Lengths)
Optional Soft Open/Close
BracketSplice kit screws
CatchSoft Open/Close
![Page 4: FLAT TRACK SLIDING BARN DOOR HARDWARE Face Mount ... Door hardware... · 4 Prep Door for Hangers & Floor Guide Drill Holes in door for hanger bolt by using a 19/32” bit. 19/32 [15.1]](https://reader036.vdocuments.site/reader036/viewer/2022062919/5ee4235aad6a402d666d7977/html5/thumbnails/4.jpg)
4
Mark for Track1 Use the track as a template to mark the center of the holes. Tracks with splice kits have a unique hole spacing between splice.
Do not install directly into Drywall. Must attach to a pre-installed header board or the wall must be braced internally.
Track height = door panel height + 2-1/4”
!
Install track splice (required for 10’, 13’, 16’ lengths)
Header board*
*Header board and anchor screws not included.
Center Lineof track
mounting holes
Internal bracing
![Page 5: FLAT TRACK SLIDING BARN DOOR HARDWARE Face Mount ... Door hardware... · 4 Prep Door for Hangers & Floor Guide Drill Holes in door for hanger bolt by using a 19/32” bit. 19/32 [15.1]](https://reader036.vdocuments.site/reader036/viewer/2022062919/5ee4235aad6a402d666d7977/html5/thumbnails/5.jpg)
5
Install Optional Soft Open/Close - Part 12Mount the soft open/close on the bottom of the track and ensure that it is oriented in the correct direction for operation.
!
Direction of door
Direction of door
![Page 6: FLAT TRACK SLIDING BARN DOOR HARDWARE Face Mount ... Door hardware... · 4 Prep Door for Hangers & Floor Guide Drill Holes in door for hanger bolt by using a 19/32” bit. 19/32 [15.1]](https://reader036.vdocuments.site/reader036/viewer/2022062919/5ee4235aad6a402d666d7977/html5/thumbnails/6.jpg)
6
Secure Track3
Use supplied anti-crush discs if installing to an internally braced wall. NEVER attach directly to drywall.!
Drill 19/64” [7.54mm] pilot holes in marked locations for track fasteners.
Attach track to wall using track brackets and fasteners as shown.
Use 5/16” Allen Wrench to install track screws
Use supplied spacers as necessary to ensure that the door has clearance from wall/moldings.
![Page 7: FLAT TRACK SLIDING BARN DOOR HARDWARE Face Mount ... Door hardware... · 4 Prep Door for Hangers & Floor Guide Drill Holes in door for hanger bolt by using a 19/32” bit. 19/32 [15.1]](https://reader036.vdocuments.site/reader036/viewer/2022062919/5ee4235aad6a402d666d7977/html5/thumbnails/7.jpg)
7
Prep Door for Hangers & Floor Guide4Drill Holes in door for hanger bolt by using a 19/32” bit.
19/32[15.1]
1 12 " 38.1
4 34 "
120.7
716 "
58 " 15.88
11.11
Route bottom, full length of door to receive floor mounted guide.
![Page 8: FLAT TRACK SLIDING BARN DOOR HARDWARE Face Mount ... Door hardware... · 4 Prep Door for Hangers & Floor Guide Drill Holes in door for hanger bolt by using a 19/32” bit. 19/32 [15.1]](https://reader036.vdocuments.site/reader036/viewer/2022062919/5ee4235aad6a402d666d7977/html5/thumbnails/8.jpg)
8
Install Anti-Jump5Install anti-jump flush to front of door.
Tip: You may need to counterbore the back of the door for thick door applications.
Front of door
Mount Hangers to Door6
Use 7/32” Allen Wrench to install
track screws
Back of door
![Page 9: FLAT TRACK SLIDING BARN DOOR HARDWARE Face Mount ... Door hardware... · 4 Prep Door for Hangers & Floor Guide Drill Holes in door for hanger bolt by using a 19/32” bit. 19/32 [15.1]](https://reader036.vdocuments.site/reader036/viewer/2022062919/5ee4235aad6a402d666d7977/html5/thumbnails/9.jpg)
9
Hang the Door7Prior to hanging door on track rotate anti-jump toward front face of door as shown to disengage.
![Page 10: FLAT TRACK SLIDING BARN DOOR HARDWARE Face Mount ... Door hardware... · 4 Prep Door for Hangers & Floor Guide Drill Holes in door for hanger bolt by using a 19/32” bit. 19/32 [15.1]](https://reader036.vdocuments.site/reader036/viewer/2022062919/5ee4235aad6a402d666d7977/html5/thumbnails/10.jpg)
10
Adjust the Stops8Tighten set screws. Start with bottom set screws then move to top set screws with sufficient force to drive set screws into bar after final adjustment. Ensure the stops allow for the door to extend the desired length over the door opening. Adjust stops accordingly.
![Page 11: FLAT TRACK SLIDING BARN DOOR HARDWARE Face Mount ... Door hardware... · 4 Prep Door for Hangers & Floor Guide Drill Holes in door for hanger bolt by using a 19/32” bit. 19/32 [15.1]](https://reader036.vdocuments.site/reader036/viewer/2022062919/5ee4235aad6a402d666d7977/html5/thumbnails/11.jpg)
11
Install Floor Guide9
Wall
Drill pilot holes for anchors using 11/32” drill bit. Mount floor guide with anchors and screws provided.
Tip: Install floor guide in a position where it won’t be exposed with door in the open or closed position.
![Page 12: FLAT TRACK SLIDING BARN DOOR HARDWARE Face Mount ... Door hardware... · 4 Prep Door for Hangers & Floor Guide Drill Holes in door for hanger bolt by using a 19/32” bit. 19/32 [15.1]](https://reader036.vdocuments.site/reader036/viewer/2022062919/5ee4235aad6a402d666d7977/html5/thumbnails/12.jpg)
Install Optional Soft Open/Close - Part 2101. Move door to desired stop location. 2. Place soft catch under soft open/close as shown. 3. Mark location of soft catch.4. Remove door from track5. Install soft catch at marked location6. Hang door on track
REV 18A 10-04-18IN4-BARNFACEMNT
Copyright © 2018, EMTEK Products, Inc. an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of EMTEK Products, Inc. is prohibited.
WARNING: This product can expose you to chemicals including lead, which is known to the state of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.!