Compressed Air and Gas Filtration Products
Finite®
com
pres
sed
air
an
d g
as f
ilter
s
Coalescing (Oil Removal) Interceptor (Particulate Removal) Adsorber (Vapor Removal)
Compressed air system protection Natural gas systems Odor removalDryer protection Desiccant dryer afterfilter Food packagingPaint spray booths Prefilter for coalescer Powder paint systems Microelectronics prefiltration Systems with high particulate
concentration Particulate protection for
non-lubricated systems
Porting to: 16" FlangeFlows to: 37,000 SCFM (63,000 m3/hr)Design: ASME Code/CRN (Canadian Registration)
Available Options:High TemperatureHigh PressureAll Stainless Construction
Finite® Large Capacity
Finite Filter's large capacity ASME filter vessels have been
designed specifically for our coalescing elements and
incorporate large sump capacities and generous exit cavities for
maximum performance with low differential pressures.
All units are "U" stamped and conform to ASME Section VIII
standard code for pressure vessels. With flow capacities to
37,000 SCFM and optional materials of construction, most
compressor source filtration requirements can be met.
Specifications:
Typical Applications
ASMEVessels
com
pressed air
and gas filters
BA-Series Dual-Stage Compressed Air Filters
Bulletin 1300 - 905/USA
Finite®
Coalescer/Adsorber Combination Unit
Flows 75 SCFM (128 m3/hr)
Pressures to 500 PSIG (34 bar)
•
•
•
com
pressed air
and gas filters
Micro-SeriesAir/Gas Microfiltration Products
Bulletin 1300 - 450/USA
Finite®
Membrane Elements and Housing Assemblies For:
Semiconductor/Microelectronics
Medical/Pharmaceutical
Food and Beverage
•
•
•
com
pres
sed
air
an
d g
as f
ilter
s
inite® Filter’s
Micro-Series
filters are designed to
provide absolute rated
membrane filtration
for the semiconductor,
pharmaceutical, and food
and beverage markets.
Our pleated membrane
media offers absolute
removal ratings for
contaminants as small as
0.01 µm while providing
lower differential pressures
than competitive membrane
products.
Finite®s pleated PTFE
media has the lowest
pressure drop at rated flow
and the highest efficiency in
the filtration industry. These
important factors provide
substantial savings for our
customers.
All filter housings are
constructed of 316L
stainless steel and have
a Maximum pressure
rating of 150 PSIG/10 bar.
Connection sizes range from
1” NPT to 6” flange.
F
Finite’s Air and Gas Microfiltration Products - Micro-Series c
ompressed a
ir and g
as filters
com
pres
sed
air
an
d g
as f
ilter
s
Instrumentation
and steam filter
Instrumentation andGas Sampling Filters
Bulletin 1300 - 694/USA
Finite®
Instrumentation
and steam filter
Stainless steel, aluminum & plastic housingsClear bowls availableConnections from 1/8” to 2” NPTPressures to 5000 PSIG
••••
Instrumentation
and steam filter
hospitals
food industrypharmaceutical
Finite® Steam Filter
hospitals
Steam plays a very important role in a variety of industries including food and beverage, hospital, and pharmaceutical. In order to ensure effective
and continuous operation of many processes in these industries, it is often critical that high quality steam is used. A Finite Steam Filter can be used to produce high quality steam by removing both particulate and condensate prior to critical processes. Although each industry’s steam requirements may vary slightly, the solution is always the same…Finite® Steam Filters!
98% efficient at 0.1 micronRemoves rust and other particle contaminationRemoves Excessive condensate from steamDisposable filter elements
••••
304 Stainless Steel EPR Seals (2) Microfibre®
•••
Connection Size: 1” NPTMax. Pressure: 125 PSIGMax. Temp: 353°F Max. Flow Rate: 400 lbs./hr. at 125 PSIGOverall Height: 36 inchesMinimum 14” clearance for element removalWeight: 25 pounds
••••
••
•
Materials of construction
specifications
All steam filters are sold with a spanner
wrench and a preinstalled element.
features
Part numbersSteam Filter: SFN4-SE13-145Replacement Element: SE13-145 x 8Note: Steam Filter is sold with one spanner wrench and preinstalled element. Replacement elements are sold in Boxes of eight. Contact factory for other connection configurations.
Stainless Housing
Filtered Steam Out
Unfiltered Steam In
Automatic Condensate Drain
BenefitsEasy to installLower yearly maintenance costs than competitive filtersNo costly downtime associated with the cleaning and backflushing of filter elements- just replace element every 6 weeks
•••
Microfibre® Filter Cartridge
Bleeder Valve
Sanitary Type Closure Collar
Instrumentation
and steam filter
Bulletin 1300 - 250/USA
High P
ressure &
cn
g filters
High Pressure FiltersCompressed Air & Gas
Bulletin 1300 - 997/USA
Finite®
CNG and Alternative Fuel Filters
Pressures to 6000 PSIG
Ductile Iron, Stainless Steel & Aluminum Housings
•
•
•
High P
ressure &
cn
g filters
fRl’s &
Vacuum
exhaust filters
Air Preparation UnitsFilters, Regulators and Lubricators
Bulletin 1300 - 703-3/USA
Finite®
fRl’s &
Vacuum
exhaust filters
Bulletin 1300 - 775/USA
Finite®
fRl’s &
Vacuum
exhaust filters
Stainless Steel Air Preparation UnitsFilters, Regulators and Lubricators
fRl’s &
Vacuum
exhaust filters
fRl’s &
Vacuum
exhaust filters
Vacuum Pump Exhaust Filters
Bulletin 1300 - 310/USA
Eliminate 99.9% oil mist and smoke from vacuum pump Exhaust
Easily adapts to most vacuum pumps
Flows to 200 CFM
•
•
•
Finite®
Dryers
Compressed Air & Gas Desiccant DryersFor Point of Use and OEM Applications
Dryers
Bulletin 1300 - 850/USA
Finite®
Dryers
Compressed Air Hollow Fiber Membrane Dryers
Dryers
Bulletin 1300 - 800/USA
Finite®
Par-fit
conversion elem
ents
Par-fit
conversion elem
ents
Par-FitConversion Elements
TM
Par-fit
conversion elem
ents
Bulletin 1300 - 500-1/USA
Finite®
accessories
Air Line Filtration Accessories
Bulletin 1300 - 150/USA
Finite®
accessories
FLUID CONNECTORS
HYDRAULICS
INSTRUMENTATION
SEAL
> Rubber & thermoplastic hose> Industrial hose> Tube fittings & adapters> Tubing & plastic fittings> Brass fittings & valves> Hose couplings> Quick disconnects> Check valves> Expert systems> Custom couplings & fittings
> Medium/high pressure fittings & valves
> Instrumentation fittings> High-purity fittings,
diaphragm valves & regulators
> Instrumentation ball, plug, needle, check & manifold valves
> Diaphragm & bellows valves> PFA & PTFE fittings, valves,
pumps & regulators> Regulators & transducers> CGA gas cylinder
connections> Analytical solutions
> Elastomeric O-rings> Homogeneous & inserted
elastomeric shapes & diaphragms
> Metal & plastic retained composite seals
> Polymeric & plastic dynamic seals
> Rubber & plastic boots/bellows
> Extruded & precision-cut/ fabricated elastomeric seals
> Thermoplastic engineered seals
> EMI shielding/grounding devices
> Thermal management products
> Hydraulic cylinders> Accumulators> Rotary actuators> Hydraulic and lube oil filters> Hydraulic valves> Hydraulic motors & pumps> Hydrostatic steering> Power units> Electrohydraulic systems> Metering pumps> Integrated hydraulic circuits> Power take-offs
AEROSPACE
AUTOMATION
CLIMATE & INDUSTRIAL CONTROLS
> Flight control systems & components
> Thrust-reverse actuation> Electrohydraulic servovalves> Hydraulic systems &
components> Pumps> Fuel systems & components> Pneumatic controls &
components> Fluid metering, delivery &
atomization devices> Wheels & brakes> Fuel manifolds> Inert/oxygen generating
systems> Electromechanical actuation> Couplings & valve fittings> Hoses & rigid tubes
> Pneumatic valves> Linear motors> Air preparation units> Stepper & servo drives,
controls> Positioning tables> Electric & pneumatic actuators> Structural extrusions> Vacuum products> Pressure sensors> Pneumatic logic> Human-machine interface> Gantry robots> Multi-axis motion control
products
> Refrigeration & general-purpose solenoid valves
> Flow controls> Pressure regulators> Check, ball, shut-off
& service valves> Spun copper components> Value-added assemblies> Thermostatic & electronic
expansion valves> Accumulators, filter dryers
& receivers> Heater/air conditioning hose
& hose assemblies> Gerotors> Process control valves
> Hydraulic, lubrication & coolant filters
> Process, chemical, water & microfiltration filters
> Compressed air & gas purification filters
> Lube oil & fuel filters> Fuel-conditioning systems> Fuel filters/water separators> Condition monitoring> Aviation fuel filters> Analytical gas generators> Compressed air separation
systems> Nitrogen, hydrogen & zero air
generators> Engine air, fuel, oil filtration &
systems
FILTRATION
About Parker Hannifin Corporation
With annual sales exceeding $8 billion, Parker Hannifin is the world’s leading diversified manufacturer of motion and control technologies and systems, providing precision-engineered solutions for a wide variety of commercial, mobile, industrial and aerospace markets.
The company employs more than 50,000 people in 46 countries around the world. Parker has increased its annual dividends paid to shareholders for 49 consecutive years, among the top five longest-running dividend-increase records in the S&P 500 index.
For more information, visit the company’s web site at http://www.parker.com, or its investor information site at http://www.phstock.com.