1212
FA
LS
EW
OR
K S
OLU
TIO
NS
: PR
OP
PIN
G
CONDECK Stramit’s CONDECK HP composite decking is a 300mm wide, galvanised metal profile sheet used to support suspended concrete floors in steel or concrete construction or over-loaded masonry walls. It is a lightweight and efficient system that is easy to handle and cut on site. Its engineered ribs have excellent spanning capacities making it suitable as lost formwork. Engineers can also take advantage of its composite action to optimise slab design, thereby saving on concrete and reinforcement costs.
Available in stock lengths or cut to required measurements, and as a low-glare option.
Description Weight (kg) Code NumberStramit Condeck HP 0.75mm 3.04 CDEK075
Stramit Condeck HP 0.90mm 3.62 CDEK090
Stramit Condeck HP 1.00mm 4.00 CDEK100
Stramit Condeck HP Edgeforma - CDEKEF
BONDEKLysaght’s BONDEK is a 600mm wide, permanent metal sheet used in steel or concrete construction and with load-bearing masonry walls. It provides a highly efficient, versatile and robust formwork, ceiling and reinforcement system for concrete slabs. Its wide profile steel sheeting is accepted by the building and construction industry as offering efficiency and speed of construction.
Available in stock lengths or cut to required measurements, and as a low-glare option.
Description Weight (kg) Code NumberLysaght Bondek 0.75mm thick 6.20 BDEK075
Lysaght Bondek 1.00mm thick 8.14 BDEK100
ROYAL STEEL PROPROYALprops provide a quick, easy, reliable and versatile temporary support in many construction applications. In falsework they are used under slabs/ beams, as raking shores for walls, and as temporary supports while forming columns, stair flights and other structures. Each prop consists of the inner telescoping 48.3mm O.D. tube (with regularly spaced prop pin holes) that slides within the 60.3mm O.D. outer tube which is fitted with coarse adjustable thread, a vertical slot on either side, and a heavy duty tough nut and long handle. These steel props have a load-bearing capacity of up to 35 kN (please refer to chart below).
Design chart of axial compression working load limits of ROYALprop
Description Closed height (mm) Open height (mm) Weight (kg) Code NumberROYALprop MINI 660 1010 10.5 PROPMINI
ROYALprop No.0 1090 1870 14.0 PROP0
ROYALprop No.1 1620 2620 17.0 PROP1
ROYALprop No.2 1950 3200 21.5 PROP2
ROYALprop No.3 2540 4080 25.0 PROP3
ROYALprop No.4 3200 5010 30.0 PROP4
PERMANENT STEEL DECKING
PROPPING
13
FA
LS
EW
OR
K S
OLU
TIO
NS
: PR
OP
PIN
G
PROP TRIPOD
The ROYALprop tripod is a hinged three-legged brace that fits many types of props and is used to hold the prop in the vertical position while bearers, joists, plywood and/or a modular slab system is fitted and braced above. It may be removed once the prop is tied off and braced.
Description Weight (kg) Code Number
ROYALprop Tripod 12.50 PROPTP
PROP PIN
ROYALprop pins are high tensile, solid galvanised steel rods with a 16mm diameter. A ROYALprop pin is placed through telescopic inner prop holes to sit on top of the prop nut and carry the weight of the load above. Replacement prop pins, rings and chains are all available. There are four (4) types of prop pins:
Description Code Number
Prop Pin PROPP
Prop Pin & Chain PROPPC
Prop Pin Hook Lock PROPPH
Prop Pin Deformed PROPPD
SCAFFOLD COUPLERS
Scaffold couplers are fitted to scaffold tube to secure a prop. They brace inner to inner props, or inner to outer props, with either fixed or swivel fittings depending on the structural application which the scaffold tube and fittings require.
Standard Double (90 degree) Couplers (2”x2”) are used for coupling inner prop tube to standard scaffold tube for horizontal bracing.
Standard Swivel Couplers (2”x2”) are used for coupling inner prop tube (48.3mm O.D.) to standard scaffold tube for inclined bracing.
Double Reduction (90 degree) Couplers (3”x2” Fixed) are used for coupling outer prop (60.3mm O.D) to standard scaffolding tube (48.3mm O.D) for horizontal bracing.
Swivel Reduction Couplers (3“x2“) are used for coupling prop outer tube (60.3mm O.D) to standard scaffolding tube (48.3mm O.D.) for inclined bracing.
Description Weight (kg) Code Number
Scaffold Coupler 2x2 Fixed 0.99 SC22F
Scaffold Coupler 2x2 Swivel 1.08 SC22S
Scaffold Coupler 3x2 Fixed 1.46 SC32F
Scaffold Coupler 3x2 Swivel 1.52 SC32S
Ratchet Wrench 19mm – 23mm - WRENCH
ROYAL WALL BRACING PROP
The ROYALbracing prop is a lightweight, diagonal wall brace made of long-lasting galvanised steel. They provide quick and easy formwork solutions for bracing walls and columns and for installing lightweight, pre-fabricated sandwich plasterboard and plastic walling systems panels, such as AFS, Dincel, Rediwall, Ritek or similar. The diagonal brace maintains alignment of the forms, the vertical element plumb and braces for the pressure of wet concrete.
The ROYALbracing prop has a top turnbuckle for quick adjustment and has top and bottom plates with nail/screw fixing holes for quick assembly and dismantling.
Description SWL (kN) Weight (kg) Code Number
ROYALbracingprop 30x30x2mm 12 6.0 BRPROP30ROYAL Bracing Prop 40x40x3mm 18 13.0 BRPROP40
FA
LS
EW
OR
K S
OLU
TIO
NS
: PR
OP
PIN
G
14
CONDOR ALUMINIUM PROP
High capacity aluminium props, with a height of up to 6m and load-bearing capacity of up to 90kN, are lightweight and easy to use. They have a special profile section on the outer onto which the bracing trestle fits to secure and brace. The inner has a continuous specific thread which allows continual cleaning, preventing blockages of cement deposits.
Description Weight (kg) Code NumberCondor ALUCP 260 range 1800-2600mm 16.0 COND47001Condor ALUCP 350 range 2400-3500mm 19.0 COND47002Condor ALUCP 480 range 3400-4800mm 24.2 COND47003Condor ALUCP 600 range 4450-6000mm 29.9 COND47004
Table of capability
Height ALU CP 260 ALU CP 350 ALU CP 480 ALU CP 600
Ext. tube in lower position Ext. tube in lower position Ext. tube in lower position Ext. tube in lower position
mm kN kN kN kN1800 90.01900 90.02000 90.02100 82.42200 70.82300 64.72400 63.5 90.02450 62.9 90.02500 62.4 90.02600 60.8 90.02700 90.02800 81.82900 74.73000 68.23100 62.43200 55.93300 50.03400 44.1 79.43450 41.5 78.23500 39.0 75.83600 71.23700 67.13800 62.93900 59.04000 55.94100 52.44200 48.84300 45.94400 42.94450 41.5 57.14500 40.0 55.44600 37.1 53.14700 34.1 51.04800 31.0 48.54900 45.75000 43.05100 40.35200 37.75300 35.35400 33.35500 31.25600 29.15700 27.45800 25.35900 23.56000 21.8
Italian designed, owned and made, Condor represents European excellence in the manufacture of quality Formwork solutions.
15
FA
LS
EW
OR
K S
OLU
TIO
NS
: SLA
B S
HO
RIN
G S
YS
TEM
- RO
YA
LFR
AM
E5
0 S
ER
IES
ROYAL FRAME 50
ROYALframe50 is a lightweight, improved alternate formwork shoring frame. It has galvanised tube legs, each with a 51mm outside diameter and a safe work load (SWL) of 40kN. The ROYALframe50 series is manufactured and certified to Australian Standards using seamless steel tube for increased tensile strength, pressure ratings and durability. When steel tube is rolled and welded, the weakest point in the tube is the welded seam. A seamless steel tube eliminates this weakness, so that tensile strength is uniform around the circumference.
These frames are strong, light and easy to handle, making them quick to assemble and dismantle. The 1500mm – 2400mm high frames have three (3) horizontal bars, rather than the conventional two (2), making it safer and easier to achieve safe working platforms.
The frames are 1200mm wide, facilitating ease of transport. Frames may be stacked in bundles and laid flat side by side to fit within the 2400mm wide truck tray. The ROYALframe50 has an additional drop latch pin to assist with on-site frame spacing flexibility and is compatible with other manufacturers’ pin locations.
Description Width (mm) Height (mm) Weight (kg) Code Number
ROYALframe50 1200 600 10.0 RF5006
ROYALframe50 1200 900 13.5 RF5009
ROYALframe50 1200 1200 17.0 RF5012
ROYALframe50 1200 1500 21.0 RF5015
ROYALframe50 1200 1800 24.0 RF5018
ROYALframe50 1200 2100 27.0 RF5021
ROYALframe50 1200 2400 30.0 RF5024
ROYAL FRAME 50 SLIM
This special 900mm, slim width shoring frame has the same features and benefits as the standard 1200mm wide ROYALframe50. These unique frames are strong yet lighter to handle, making them faster and easier to work with, and further reducing labour costs in assembling and dismantling. These frames may be used as a standard shoring frame system with the additional advantage of being narrower, giving the flexibility for assembly around restricted areas such as between narrow rooms, or pre-cast or prefabricated plasterboard or plastic wall bracing, or within corridors and stair case landings. They are easy to handle and manoeuvre through and around corridors, stair cases, and pre-cast/prefabricated wall bracing.
This 900mm wide frame is the perfect solution for quickly and easily creating a bracing bay on the modular slab panel system (i.e. the 1800mm x 900mm wide aluminium ROYALdek system). These slim frames use the same components as the ROYALframe50 (including jacks, crowns and braces).
Description Width (mm) Height (mm) Weight (kg) Code Number
ROYALframe50 Slim 900 600 9.0 RF50069
ROYALframe50 Slim 900 900 11.5 RF50099
ROYALframe50 Slim 900 1200 14.0 RF50129
ROYALframe50 Slim 900 1500 18.5 RF50159
ROYALframe50 Slim 900 1800 21.0 RF50189
ROYALframe50 Slim 900 2100 24.0 RF50219
ROYALframe50 Slim 900 2400 27.0 RF50249
ROYALFRAME50 SLAB SHORING SYSTEM