Transcript
Page 1: Evaluation of Properties for PlasticsEvaluation of Properties Mechanical properties Evaluation technology of top class in Japan Rubber physical properties Film physical properties

http://www.mcanac.co.jpE-mail: [email protected]

MITSUI CHEMICAL ANALYSIS & CONSULTING SERVICE, INC.

Evaluation of Properties

Mechanicalproperties

Evaluationtechnologyof top class

in Japan

Rubberphysical

properties

Film physicalproperties

Durabilitytest

Thermophysicalproperties

Opticalproperties

Thermal propertiesMelting/crystallizing temperature, specific heat, thermogravimetryMass linear expansion coefficient, needle softening temperatureDeflection temperature under load, low-temperature brittle temperatureThermal conductivity

Optical propertiesTransmittance testGloss testColor testRefractive index/birefringence index

Electrical propertiesInsulation resistance (volume/surface), dielectric breakdown voltageElectrification voltage attenuation test, dielectric constantTracking resistance test, evaluation of solar batteriesElectrochemical evaluation by use of rotating electrodes

Mechanical propertiesStretch bending/compression testTear/puncture test Pealing test, impact testHardness test, abrasion test

Viscoelasticity and flowabilityDynamic viscoelasticity, elongational viscosityMelt viscosity test, MFR testMelt tension/elongation test, swell ratio

Physical properties (Other)Specific gravity, water absorption rate, surface roughness, dimensional measurementFogging test, specific surface area/pore distributionParticle size distribution, surface friction force (LFM) Surface potential (KFM), hydrophilicity/hydrophobicity test (CFM)

Rubber physical propertiesTensile/tearing testCompression/tensile permanent set testMooney viscosity test, bending fatigue testImpact resilience test, vulcanization test

Film physical propertiesTensile tear/pealing test, heat-seal strength testHot tack test Blocking property test, slip property testImpact test (Dart film impact)

Durability testWeatherability test, heat-aging testChemical resistance test, creep testGas permeability test, fatigue testCombustion test, Friction/abrasion test

Electricalproperties

ViscoelecticityFlowability

Physical properties(others)

Polymer

Evaluation of Properties for Plastics

Search No. 9041

Top Related