FlowHand shower is limited to 1.9 gpm (7.5L/min)Faucet fill rate designed for 18gpm (68.1L/min)
••
StandardsCertified to meetCSA B-125.1, ASME A112.18.1,ICC 117.1Certified to ANSI/NSF 61/9ADA for lever handleIAPMO R&T UPC certified
•
Cartridge40mm high flow cartridge designNonmetallic/nonferrous and stainless-steelmaterial
••
DESCRIPTIONSolid brass spout chrome finish single leverhigh flow bathtub faucet with diverter buttonTwo (2) 3/4” 5’ braided stainless-steel supply linesPull out hand shower mixer with 5 settings and 5’braided hose in chrome finish
•
••
www.ellasbubbles.com
NOTE: This faucet is designed tobe installed thru:
G.W: 7.75 kg/ 17 lbs.
2-1/2” dia. hole for faucet1/3” dia. hole for mounting rods7/8” dia. hole for hand shower
•••
Ella 2 Piece Single Lever Fast Fill Faucet
Chrome or Brushed NickelAvailable Finishes
Replacing A Valve Cartridge
Step-by-step Instructions to replace a valve cartridge for Ella 2-piece faucets.
Step.3 Take outthe handle and
remove thebrass
escutcheon
Step.1 Removethe Hot/Coldscrew hole
cover.
Step.2 Use anAllen wrench to
remove thehandle Screw.
Step.4 Use awrench to
unscrew thepressure cap.
Step.5 Removethe cartridgeand replace it
with new piece.
*Follow the same steps in reverse to put the handle back on
Rubber Gasket
Steel Washer
2x Nuts
Supply Line Connection for hot
and cold (3/4" supply lines included)
Hand Mixer Connection
