«ELECTRONICS & MECHANICS PLANT » JSC
SOLUTSOLUTIONS FOR IONS FOR BRANCHESBRANCHES
(c), «ZEiM» JSC, 2005
Key Branches Key Branches Our Our CompanCompanyy Works ForWorks For
Oil gas and petrochemical industry,
Power-Engineering Nuclear
Power-Engineering
«ELECTRONICS & MECHANICS PLANT » JSC
OIL, OIL, GAGASS AND PETROCHEMICAL AND PETROCHEMICAL BRANCHBRANCHESES
(c), «ZEiM» JSC, 2005
«ZEiM»«ZEiM» JSC JSC Product Applications iProduct Applications in technological n technological proceproceduresdures
МЭОМЭО• Valve drives• Heat supply enterprise objects (boilers) • temperature control in coke-chemical production
DrivesDrives• Gas and oil flow control• Pumpout of mine water from water collectors• Regulation of the reprocessed products flow
ACTP instrumentsACTP instruments• In oil processing and pumping• In oil pumping technological procedure• In technological procedures of fertilizers production, cracking of oil.
ControllersControllers
• Fluid or gaseous materials and products discharge control
Accounting instrumentsAccounting instruments• Commercial account of crude oil (at the input) and oil products(at the output)• Technological account (refining, losses)
Driven stop and control valvesDriven stop and control valves• Gas and oil flow control• Pumpout of mine water from water collectors• Regulation of the reprocessed products flow
(c), «ZEiM» JSC, 2005
«ZEiM»«ZEiM» JSC JSC Products forProducts for Oil, Oil, GaGass and and Petrochemical BranchPetrochemical Brancheses
1. Supplies of electric actuators and electrified pipe-line valves
2. Automated regulation of pipe lines flows based on Р-130 and CROSS controllers
3. Nodes and systems of account based on “Centrosonic“ flow meters
4. Energy-saving products supplies
(c), «ZEiM» JSC, 2005
Main ConsumersMain Consumers
«Omskiy NPZ» JSC, «SILIVINIT» JSC, Solikamsk Siberian Chemical Combine,
Seversk «Novokuybyshevskiy NPZ»
JSC, Novokuybyshevsk «Nizhnekamskiy
oil-processing Plant» JSC, Nizhnekamsk
«URALKALIY» JSC, Bereznyaki
«Buzulukneft» Oil&Gas Gaining Plant «Orenburgneft» JSC, Buzuluk
«ELECTRONICS & MECHANICS PLANT » JSC
SUPPLSUPPLIES OF IES OF ELECTRIC ELECTRIC ACTUATORSACTUATORS AND AND ELECTRIFIED PIPE-LINE ELECTRIFIED PIPE-LINE VALVESVALVES
(c), «ZEiM» JSC, 2005
Electric ActuatorsElectric Actuators for for Pipe-line Valves Pipe-line Valves
МЭОФ — single-turn flanged,
МЭП — forward-travel,
MЭM — multi-turn actuators
Versions: general purpose, explosion-proof, for NPS
Service life - more than 15 years
(c), «ZEiM» JSC, 2005
Electric ActuatorsElectric Actuators for for Pipe-line Valves Pipe-line Valves
Single-turn with rated torque from 1.6 to 4000 Nm - for ball cocks, and disk shutters;
Forward-travel - for linearly operated stop and control valves;
Multi-Turn – for slide gates.
(c), «ZEiM» JSC, 2005
МЭОФМЭОФ Single-turn Single-turn Flanged Flanged Electric Electric ActuatorsActuators for for Pipe-line Valves Pipe-line Valves
MЭОФ actuators are designed for half-rotary relocation of various valve control elements such as ball cocks, gates, butterfly-type valves, slide valves, shutoff devices, etc.Versions: general purpose, explosion-proof, for NPS
(c), «ZEiM» JSC, 2005
МЭОФМЭОФ Single-turn Single-turn Flanged Flanged Electric Electric ActuatorsActuators for for Pipe-line Valves Pipe-line Valves
Rated torque on the output shaft: from 1.6 to 4000 Nm.
Full travel of the output shaft: 0.25, 0.63 revolutions.
Rated time of the output shaft full travel: from 4 to 160 s.
Consumed power - from 43 to 900 W.
Weight - from 4 to 265 kg. Service life - more than 15
years
(c), «ZEiM» JSC, 2005
МЭПМЭП,, МЭПК МЭПК Forward-travel Electric Forward-travel Electric Actuators Actuators For Pipe-line ValvesFor Pipe-line Valves
МЭП, МЭПК actuators are designed for pipe-line control valves of onward operating principle (shut-off cocks, stop and control valves, etc.)
Versions: general purpose, explosion-proof, low-noise
(c), «ZEiM» JSC, 2005
Электроприводы для трубопроводной Электроприводы для трубопроводной арматуры прямоходные МЭПК, МЭПКМарматуры прямоходные МЭПК, МЭПКМ**МЭПМЭП,, МЭПК МЭПК Forward-travel Electric Forward-travel Electric Actuators Actuators For Pipe-line ValvesFor Pipe-line Valves**
On-rod effort in the final position: from 800 to 6300 N.
On-rod effort in the initial position: from 365 to 2450 N.
Rated time of the rod full travel: from 20 to 60 s.
Consumed power – 43, 110 W, max.
Weight - from 5,2 to 17 kg. Service life - more than 15 years
* —МЭПКМ is a low-noise actuator group
(c), «ZEiM» JSC, 2005
МЭПМЭП Forward-travel Electric Actuators Forward-travel Electric Actuators For For Pipe-line ValvesPipe-line Valves
Rated on-rod effort: from 18000 to 20000 N.
Rated time of the rod full travel: from 50 to 340 s.
Rated full travel of the rod : from 25 to 170 mm
Consumed power – 200 W, max. Weight - 30 kg, max. Service life - more than 15 years
(c), «ZEiM» JSC, 2005
МЭММЭМ Multi-Turn Electric Actuators Multi-Turn Electric Actuators For For Pipe-line ValvesPipe-line Valves
МЭМ electric actuators are designed for relocation of control and stop elements of self-braking shutoff-regulating valves in accordance with control signals generated by the automated control and adjusting devices.
Versions: general purpose, explosion-proof, for NPS
(c), «ZEiM» JSC, 2005
МЭММЭМ Multi-Turn Electric Actuators Multi-Turn Electric Actuators For For Pipe-line ValvesPipe-line Valves
МЭМ actuators of general purpose version are intended for functioning at the temperature from
-40 to +50 °С; МЭМ-16- IIВТ4 version actuators allow operation at the temperature from
-50 to +50 °С.
(c), «ZEiM» JSC, 2005
PartnerPartnershipship wwith ith Valve ManufacturValve Manufacturererss
Ball cocks: Giras (Himki), NPF «PRIS»(Nizhnekamsk), JSC MC «Splav»(V. Novgorod)Disk shutters, stop and control valves :Kotelinikovskiy JSC, «Armagus» valve plant (Goose-Crystal) , «CHZEM» plant (Chekhoff), JSC «Armatek», NPO «Promarmatura» (St Petersburg), and others.
(c), «ZEiM» JSC, 2005
ElectrifiedElectrified Stop and Control Valves for Stop and Control Valves for PipelinesPipelines
Ball Cocks
Disc Shutters
Valves
Drossel Slide Gates
Shut-off Valves
(c), «ZEiM» JSC, 2005
Stop and Control Valves With МЭО МЭОФ, МЭМ, МЭПК, МЭП Electric Actuators made by «ZEiM» JSC:
Ball Cocks + МЭОФ
Disc Shutters + МЭОФ
Valves + МЭП, МЭПК
Drossel Slide Gates + МЭО
Shut-off Valves + МЭОФ
ElectrifiedElectrified Stop and Control Valves for Stop and Control Valves for PipelinesPipelines
(c), «ZEiM» JSC, 2005
«ZEiM»«ZEiM» JSC PartnerJSC Partner in USA in USA —— Valvtechnologies Inc.Valvtechnologies Inc.
One of the Leaders in production stop and control pipe-line and preventive valves
Valvtechnologies Ball Cocks are applied as stop and control valves, owing to their special inner finishing.
«ELECTRONICS & MECHANICS PLANT » JSC
PIPELINEPIPELINE FLOW CONTROLFLOW CONTROL BASED ONBASED ON Р130 Р130 AND CROSSAND CROSS - - CONTROLLERSCONTROLLERS
(c), «ZEiM» JSC, 2005
PipelinePipeline Flow ControlFlow Control
Actuators Pipeline flow control automations
stop and control valves
Remote control
“more”
“less”
“input”
“Control signals”
(c), «ZEiM» JSC, 2005
Instruments Instruments of of Technological ProceTechnological Procedures dures ControlControl and Adjustmentand Adjustment
The given instruments in kit with other our products (actuators, drives, flow and heat meters, controllers ) allow to effectively control pipeline flows (including in oil pipelines).
(c), «ZEiM» JSC, 2005
Microprocessor ControllersMicroprocessor Controllers
The controllers are used for building modern efficient systems of automation.
Far-famed Р-130 controllers are produced.
In 2003 new CROSS controller was produced
Prepared to production are
CROSS controllers, "TRASSA" system of field instruments supporting international standards of open systems.
«ZEiM» is one of the leaders of russian controller market
(c), «ZEiM» JSC, 2005
Supplies of Equipment for Supplies of Equipment for Technological Technological Procedures Procedures AutomationAutomation
For 10 years «ZEiM» JSC has produced and installed more than 16000 of РЕМИКОНТ Р-130 controllers.
For modernization of the product straightedge and successful progress, CROSS controller of new generation has been developed.
(c), «ZEiM» JSC, 2005
Supplies of Equipment for Supplies of Equipment for Technological Technological Procedures Procedures AutomationAutomation
CROSS Controller CROSS Controller special featurspecial featureses::• Correspondence to international standards of open systems;• Modern element base and cutting-edge design;• High-efficiencyHigh-efficiency;• Developed systems forming qualities;• High reliability and vitality.
(c), «ZEiM» JSC, 2005
Software-Software-hardwarehardware Units ArchitectureUnits Architecture
CROSS CROSS and "TRASSA" and "TRASSA" controllercontrollerss (controller (controllers of general industrial s of general industrial purpose purpose ))
Specialized Specialized high-efficienthigh-efficient VME-controllers for systems of diagnostics VME-controllers for systems of diagnostics Microprocessor relay protectionMicroprocessor relay protectionss Processors Processors forfor interfacing the primary interfacing the primary microprocessor devicesmicroprocessor devices Data Data storage storage serverserverss Tool system of Tool system of software software programs development for ISaGRAF programs development for ISaGRAF
WorkbenchWorkbench controller controllerss OSOS server server SCADA- systemSCADA- system
Software-Software-hardwarehardware facilities are facilities are designdesigned in accordance with ed in accordance with international standards and open systems technologies.international standards and open systems technologies.
«ELECTRONICS & MECHANICS PLANT » JSC
NODES AND SYSTEMS OF NODES AND SYSTEMS OF ACCOUNT BASED ON ACCOUNT BASED ON ««CENTROSONICCENTROSONIC»» F FLOW LOW MMETERSETERS
(c), «ZEiM» JSC, 2005
Supplies of Equipment for Supplies of Equipment for Technological Technological Procedures Procedures AutomationAutomation
“Centrosonic“ oil and
oil-derivatives counter
High accuracy ultrasonic instrument for commercial or operative account of fluid discharge and volume, including oil and oil derivatives.
(c), «ZEiM» JSC, 2005
Structured schemeStructured scheme
(c), «ZEiM» JSC, 2005
““CentrosonicCentrosonic““ advantages advantages
Advantages: High measurement accuracy owing to usage of the patented
algorithm of signal processing; local and remote measurements in 4 pipelines simultaneously; all sensors are located in one case; 1 year long data storage; Measurement of the mass consumption and the product mass,
including accrued totals; measurement of density and temperature by acoustic densimeter; built-in self-diagnosing device provides for a quick calibration and
check-up without fluid run-trough and pipeline demounting.
(c), «ZEiM» JSC, 2005
UFM001 ExiaIIC Ultrasonic UFM001 ExiaIIC Ultrasonic Heat MeterHeat Meter
UFM001 ExiaIIC ultrasonic heat meters are designed for metering of discharge and volume of fluid media, (soil water, crude oil, fuel oil, petrol, diesel fuel, etc) at explosive objects.
The meter is used for commercial and technological account. The meters are state registered (№ 14315-00)
Certificates:
- № 7805 certificate of measurement facilities approval;
- State Energy Inspection №005-ВС certificate;
- State Energy Inspection №РС 04-2814 license;
- №21.ЧЦ.8.421.Т.241.4.99 hygiene conclusion.
(c), «ZEiM» JSC, 2005
UFM001 ExiaIIC Ultrasonic UFM001 ExiaIIC Ultrasonic Heat MeterHeat Meter
MAIN TECHNICAL FEATURES
Dn - pipe-line conventional dia, mm 50-1600 Metered fluid temperature, C +4…+100 Pressure, MPa 1,6
- for pipeless version 2.5 Interval between check-ups, year 2 Flow proportional output analog signals:
- frequency signal, Hz 0-1000
- current signal, mA 0 – 5, 0-20, 4-20
Inaccuracy of discharge measurement, % 1,7
«ELECTRONICS & MECHANICS PLANT » JSC
SUPPLIES SUPPLIES OF OF ENERGY-SAVINGENERGY-SAVING EQUIPMENT EQUIPMENT
(c), «ZEiM» JSC, 2005
Technological ProceduresTechnological Procedures
Preparation of homogeneous emulsions, creames, pastes;
Maintenance of the preset solution temperature in tanks. Pumping over of solutions and oil derivatives. Collection of spilt oil products.
(c), «ZEiM» JSC, 2005
Supplies of Equipment for Supplies of Equipment for Technological Technological Procedures Procedures AutomationAutomation
Transsonic «FISONIC» Device
«FISONIC» transsonic jet-injector device is a heat exchanger which utilizes vapour thermal power for heating and circulation of water without resorting to other energy consources.
(c), «ZEiM» JSC, 2005
Fuel OilFuel Oil Sunk-operatedSunk-operated Vapour Vapour--jet Pumpjet Pump
The pump is designed for simultaneous upheating and input into a pressurized pipeline of a highly viscous media, allowing direct contact with water vapour - a fuel oil, syntetic acids, molasses, etc.
Transforms the pumped media and water into a microdispersed emulsion. The pump is usable for depumping of the fuel oil sediment from the fuel oil tanks with further upburning of it in the boiler fireboxes.
(c), «ZEiM» JSC, 2005
VapourVapour--jet jet Fuel OilFuel Oil UpheaterUpheater
The upheater is designed for fast upheating of the fuel oil, bitumen, syntetic acids and other viscous products in rail-road and other tanks, etc.
Important feature
The upheater transforms the condensate and oil derivative into a microdispersed water-fuel emulsion.
(c), «ZEiM» JSC, 2005
Jet-Jet-pressurizing Through-vapouring Devicepressurizing Through-vapouring Device
The device is designed for fast vapouring through of the rail-road tanks after removing oil derivatives, syntetic acids, vegetable oils and other viscous products from them.
Important feature
The device pressurizes secondary low-potential vapour
«ELECTRONICS & MECHANICS PLANT » JSC
POWER POWER ENGENGINEERINGINEERING
(c), «ZEiM» JSC, 2005
««ZEiMZEiM» JSC » JSC Products in Technological Products in Technological Procedures of Power Procedures of Power EngEngineeringineering
МЭОМЭО•Т-upheating control of the rolling workshop prefabricated pieces•Dome furnace pressure regulation•Heat supply enterprise objects (boilers) •Slide gate drives•Smoke trap drives
Drives and driven stop and control valvesDrives and driven stop and control valves•Valves control in town preparation systems•Regulation of water discharge for filter regeneration •Water level control of low and high pressure heaters •Т and R - vapour regulation and in-turbine inlet•Merging the condensate with the overheated vapour
ControllersControllersAccount of heat resources, vapour and hot water production, air inspectionAutomation of combustion processes, welded seams thermoprocessing, chemical water treatment, etc.
Accounting instrumentsAccounting instrumentsCommercial account of heat energy and waterTechnological account of water
(c), «ZEiM» JSC, 2005
««ZEiMZEiM» JSC » JSC Products Products At At The Power Energy The Power Energy OObjectbjectss
OObject bject applicationapplication ProductsProducts OObject bject
1 Automations of the StationTechnological Procedures
Р-130, РП-4, МЭО, Instruments Nevinnomysskaya HPE, Nevinnomyssk
2 Chemical water purification treatment.
МЭО, МЭОФ with shutters Mosgorteploenergo,
Moscow
3 Regulation of gas inlet МЭОФ with stop-control valves Hydro Power Electrostation, Surgut
4 System of heat media control. Р-130 controllers, МЭОФ with ball cocks
TEC-1, Nizhnekamsk
5System of burner gas inlet МЭОФ with stop-control valves Kostromskaya PES
(c), «ZEiM» JSC, 2005
Diagram of TPADiagram of TPA based on based on «ZEiM»«ZEiM» JSC JSC ProductsProducts
(c), «ZEiM» JSC, 2005
Electrified Pipe-line ValvesElectrified Pipe-line Valves at at the the Operating Operating ObjectObject
Back
«ELECTRONICS & MECHANICS PLANT » JSC
INSTRUMENTSINSTRUMENTS FOR FOR MONITORING AND CONTROL MONITORING AND CONTROL OFOF TECHNOLOGICAL TECHNOLOGICAL PROCEDURESPROCEDURES
(c), «ZEiM» JSC, 2005
Supplies of Equipment for Supplies of Equipment for Technological Technological Procedures Procedures AutomationAutomation
For 10 years «ZEiM» JSC has produced and installed more than 16000 of РЕМИКОНТ Р-130 controllers.
For modernization of the product straightedge and successful progress, CROSS controller of new generation has been developed.
(c), «ZEiM» JSC, 2005
CROSS Controller CROSS Controller Special FeaturSpecial Features:es:
• Correspondence to international standards of open systems;• Modern element base and cutting-edge design;• High-efficiencyHigh-efficiency;• Developed systems forming qualities;• High reliability and vitality.
(c), «ZEiM» JSC, 2005
Software-Software-hardwarehardware Units ArchitectureUnits Architecture
CROSS CROSS and "TRASSA" and "TRASSA" controllercontrollerss (controller (controllers of general industrial s of general industrial purpose purpose ))
Specialized Specialized high-efficienthigh-efficient VME-controllers for systems of diagnostics VME-controllers for systems of diagnostics Microprocessor relay protectionMicroprocessor relay protectionss Processors Processors forfor interfacing the primary interfacing the primary microprocessor devicesmicroprocessor devices Data Data storage storage serverserverss Tool system of Tool system of software software programs development for ISaGRAF programs development for ISaGRAF
WorkbenchWorkbench controller controllerss OSOS server server SCADA- systemSCADA- system
Software-Software-hardwarehardware facilities are facilities are designdesigned in accordance with ed in accordance with international standards and open systems technologies.international standards and open systems technologies.
«ELECTRONICS & MECHANICS PLANT » JSC
ACCOUNTING ACCOUNTING INSTRUMENTSINSTRUMENTS ININ TECHNOLOGICAL TECHNOLOGICAL PROCEDURESPROCEDURES OFOF POWER POWER ENGENGINEERINGINEERING
(c), «ZEiM» JSC, 2005
Accounting InstrumentsAccounting Instruments InIn Technological Technological ProceduresProcedures Of Power Of Power EngEngineeringineering
• Commercial account to heat energy and water• Technological account of water
(c), «ZEiM» JSC, 2005
UFEC-005 UltrasonicUFEC-005 Ultrasonic heat counter heat counter
The heat counter is designed for metering of heat power, consumed heat quantity, discharge and volume of media, its temperature in the inlet and outlet pipeline of closed and opened heat supply systems.
The meters are state registered
Certificates:
- Certificates of measurement facilities approval;
- State Energy Inspection expert conclusions
(c), «ZEiM» JSC, 2005
UFM 001,UFM 001, UFM-005 UFM-005,, РУ2К РУ2К UltrasonicUltrasonic Flow Discharge CountersFlow Discharge Counters
Application: for flow discharge and volume metering of various fluids,
hot and potable water included for commercial account of water resources.
Certificates:
- Certificates of measurement facilities approval;
- Certificates of State Energy Inspection;
- Hygiene conclusion
«ELECTRONICS & MECHANICS PLANT » JSC
ENERGY-SAVING PRODUCTSENERGY-SAVING PRODUCTS ININ TECHNOLOGICAL PROCEDURESTECHNOLOGICAL PROCEDURES OF POWER OF POWER ENGENGINEERINGINEERING
(c), «ZEiM» JSC, 2005
Energy-saving ProductsEnergy-saving Products InIn Technological Technological ProceduresProcedures Of Power Of Power EngEngineeringineering
Heating up and inlet of raw water for chemical treatment and of chemically purified water to deairator.
Heating and water supply system of public buildings and industrial objects.
Preparation of hot water for technological needs, for washing, e.g. Maintenance of preset temperature of fluid in tanks Heating up of viscous products in r/r tanks for futher downpour Maintenance of preset temperature in oil derivatives store tanks Vapouring through and cleaning of tanks after removing viscous products
from them Over or de-pumping of water, oil products and other fluids from tanks,
ground hollows, traps.
(c), «ZEiM» JSC, 2005
Transsonic Transsonic ««FISONICFISONIC»» Device Device
«FISONIC» transsonic jet-injector device is a heat exchanger which utilizes vapour thermal power for heating and circulation of water without resorting to other energy consources.
(c), «ZEiM» JSC, 2005
Fuel OilFuel Oil Sunk-operatedSunk-operated Vapour Vapour--jet Pumpjet Pump
The pump is designed for simultaneous upheating and input into a pressurized pipeline of a highly viscous media, allowing direct contact with water vapour - a fuel oil, syntetic acids, molasses, etc.
Transforms the pumped media and water into a microdispersed emulsion. The pump is usable for depumping of the fuel oil sediment from the fuel oil tanks with further upburning of it in the boiler fireboxes.
(c), «ZEiM» JSC, 2005
VapourVapour--jet jet Fuel OilFuel Oil UpheaterUpheater
The upheater is designed for fast upheating of the fuel oil, bitumen, syntetic acids and other viscous products in rail-road and other tanks, etc.
Important feature
The upheater transforms the condensate and oil derivative into a microdispersed water-fuel emulsion.
(c), «ZEiM» JSC, 2005
Jet-Jet-pressurizing Through-vapouring Devicepressurizing Through-vapouring Device
The device is designed for fast vapouring through of the rail-road tanks after removing oil derivatives, syntetic acids, vegetable oils and other viscous products from them.
Important feature
The device pressurizes secondary low-potential vapour
«ELECTRONICS & MECHANICS PLANT » JSC
ATOMIC POWER ATOMIC POWER ENGINEERINGENGINEERING
(c), «ZEiM» JSC, 2005
«ZEiM»«ZEiM» JSC JSC Product Offers for Nuclear Product Offers for Nuclear Power EngineeringPower Engineering
valves control (ball cocks, gates, butterfly-type valves, slide valves, shutoff devices, etc.)
water treatment control
opening of hermozone gate
(c), «ZEiM» JSC, 2005
Applicability of Applicability of «ZEiM»«ZEiM» JSC JSC Products at Products at Nuclear Power StationsNuclear Power Stations
1 class of safety
МЭО, МЭОФ, МЭО, МЭОФ, МЭМ, АСТМЭМ, АСТPP instrumentsinstruments
The products The products supplies are supplies are feasible for:feasible for:
2 zone
4 zone3 zone5 zone
(c), «ZEiM» JSC, 2005
Actuator Versions fActuator Versions for Atomic Power or Atomic Power EngineeringEngineering
Electric Actuators And Drives
МЭО, МЭОФ 6,3, 16, 40, 100, 250, 630, 1600, 4000, 10000
МЭМ 100 / 160 – 25 – 01 АП, JSC
МЭМ 100 / 460 – 63 – 01 АП, JSC
Designing of ПЭОМ, ПЭОЗ Electric Actuators for stop valves
Instruments for Automated Controls of Technological Procedures
ПБР 3АА, ПБР 2МА, ФЦ 06 50
Back
(c), «ZEiM» JSC, 2005
QualityQuality Provision Provision
“ZEiM“ JSC System is TUV CERT № 07 100 823/0 certified (Germany) to correspond to ISO 9001:1994 international standard requirements
100% of to-sale products is GOST R certified
The increased requirements of equipment quality for ÑPS are met owing to programs and plans of quality in accordance with MAGATE requirements
(c), «ZEiM» JSC, 2005
Our Strong Points In Quality ProvisionOur Strong Points In Quality Provision
«ZEiM» JSC is licensed to design instruments for monitoring and control of technological procedures for NPS License № ВО-11-101-0157 valid from 10.11.1998 till 10.11.2003)
«ZEiM» JSC is licensed to design instruments for monitoring of technological procedures for NPS. License № ВО-12-101-0065 valid from 20.06.1998 till 20.06.2003
Realization of the declared activity is confirmed by conclusion letters № Т-К-37 (25.01.2002) (on equipment design for 1 and 2 units of Tyanivaniskaya NPS), № Т-И-52 (18.04.2002) (on equipment manufacture for 1 and 2 units of Tyanivaniskaya NPS)
(c), «ZEiM» JSC, 2005
AdvantagesAdvantages of the Developedof the Developed TPA -TPA - Technological Procedures Technological Procedures AutomationAutomationss
Integration into the unified TPA system and PA facilities of different producers in the open system standard
Unified programming technology for the controllers of various companies and the user adaptability of the software programs
Interfacing different SCADA-systems through the standard Windows multi-task environment (DDE, OS)
Systems reliability and vitality upgrade Possibility of the system improvement without changing
its basic components
(c), «ZEiM» JSC, 2005
Key Factors of SuccessKey Factors of Success
The Program for reformation of public services, the Law on power saving, a number of standard and legal documents of the federal and regional levels and new construction standards and regulations.
At the Russian market heat power becomes a product of certain price and its consumer wants to pay only for the actually consumed power, getting an opportunity to control this process on their own discretion. Present level of 50-60% subsidies for heat power consumers concerning the municipal objects by 2005 should decrease to 0% in accordance with the Regulations of the Public Services Reform.
Fuel and Power Complex of Russia is the key factor for helping the state economy out of the crisis. Therefore the power industry development in Russia will get a priority of development in comparison with other industries.
New russian market shows that a new consumer category is appearing capable of building their private houses. On the other hand, while the economy will be reaching a certain level, bearing in mind the traditional Russian problem concerned with apartments, the construction of standard apartments will be developing.
Under the present economical conditions in Russia, power saving becomes one of the strategic orientations of development. As a result, the following factors are available:
(c), «ZEiM» JSC, 2005
I. Yakovleff Ave., 1, 428020, Cheboksary, RUSSIA , Tel: (8352) 69-51-48, Fax: (8352) 20-15-49
Thanks a lot for your Thanks a lot for your attentionattention!!