ELECTRICAL ENGINEERING TECHNOLOGY PROGRAM
EET 105: ELECTRICAL SYSTEMS
Instructor: Albert Lozano
Introduction to the EET Laboratory
EXPECTATIONS FOR LAB COMPONENT
* What I want to accomplish for you:- Understand basic equipment in Electronics Lab- Be able to perform basic electrical measurements correctly- Build small electronic circuits- Analyze and measure variables in circuits- Write laboratory reports- Enjoy electronics
* What you need to do:- Participate actively in this part of the course- Ask questions- Complete all the assignments- Ask questions- Enjoy this course- Ask questions…
MATERIALS NEEDED FOR THIS COURSE:
•Notebook with binded pages: - Write down your tasks and results while being completed- Dated entries- Do not tear off pages- Instructor will check notebooks regularly- Will be the basis for your lab report
•Materials to carry out Laboratory Experiences:- Supplied by Penn State
Suggestion: Purchase basic partsOf use for the rest of your laboratory courses and years to comeTime SavingsBetter learning and experimentingWork on your own: home, holidays, etc…
Materials that you may consider purchasing(sorted in order of importance)
• Solderless Breadboard• Jumper wires• Cutting / Stripping tool• Tool box to carry equipment• Set of Resistors• Soldering iron•…
Where to purchase them?Online distributors. Example:
• Jameco (www.jameco.com)• Electronics Express http://www.elexp.com)• Other..
Solderless Breadboard: Allows building and modifying circuits
Electronic Express: http://www.elexp.com/bb_104.htm
Jameco: Electronic Design Prototyping Systems Solderless boards
http://www.jameco.com/webapp/wcs/stores/servlet/CategoryDisplay?langId=-1&storeId=10001&catalogId=10001&categoryId=652050&sort=n&pagenum=3
Breadboards / Solderless: (Electronics Express)
Best choices: H or I WITH WIRE KIT
Wire jumpers Kit: Interconnection on Board
Wire jumpers Kit: Interconnection on Board
Wire and Cable Assortments Jumper Cables
http://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?langId=-1&storeId=10001&catalogId=10001&pa=19289CH&productId=19289
http://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?langId=-1&storeId=10001&catalogId=10001&pa=20079CH&productId=20079
or
If purchasing from Electronics Express, buy the jumper cables togetherwith the solderless board
Cable Strippers: Cut cable and strip plastic cover
Electronic Express: http://www.elexp.com/tol_0220.htm or similar
Jameco: Test, Tools & Supplies Tools Hand Tools, Strippers
http://www.jameco.com/webapp/wcs/stores/servlet/CategoryDisplay?storeId=10001&catalogId=10001&langId=-1&categoryId=601050
Also add a small screwdriver
Tool box to carry board, tools, etc : Walmart, Kmart, etc…
Resistors Kit: Several resistances standard values Buy ¼ W or ½ W (1/8 W are too small)
Electronics Express: http://www.elexp.com/cmp_2501.htm
Jameco:http://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?langId=-1&storeId=10001&catalogId=10001&pa=103165CH&productId=103165
Soldering Iron: There is no need to solder in this course, nor in the majority of courses you will take. Only EET 420 may require soldering
Purchase for your own personal interest
Use a soldering Iron with temperature control and thin tips Do not waste your money on cheaper models. Not versatile enough
Accessories needed: Solder rolls and desoldering braids
Example: Jameco product # 229673CH
http://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?langId=-1&storeId=10001&catalogId=10001&productId=229673
Example Electronics Express: http://www.elexp.com/sdr_y379.htm
Once again, feel free to Ask any questions you may have…