Download - Electric Turn table MY5630 MY5630ET
Specifications
MY5630ETElectric Turn table
MY5630Manual turn table
Shield boxes suitable for developing antennas and evaluating communication characteristics
such as wireless devices.
Features
Option
*MICRONIX Corporation reserves the right to make a change in design, specification and other information without prior notice.
(*1)Include connecting cables and connectors inside shield box.
AGENCY
CL1709E
*Please feel free to contact us for details.
Antenna fixing base : Optional antenna set can be attached. (Photo: MY 5630-01)
[Ex.] Rotation mechanism : Measurement in horizontal / vertical direction (Photo : MY 5630-02)
Electric turn table : Rotate the DUT and measure the antenna pattern.
· Attach around the turntable and prevent interference of cables during rotation.
· Since DUT can be placed once on wooden base between door and turntable, the burden of installation is reduced.The surface of wooden base is 5mm lower than the surface of turntable.
· Correspond to high gain, wide bandwidth and high power output.
· Mounted on a fixed base, receive in horizontal / vertical plane using rotating mechanism and then measure.
· Combined with SG and high-frequency amplifier, enable to evaluate radiation immunity.
· It is possible to evaluate receiving characteristics of base station and 4K broadcasting equipment.
· Small antenna suitable for broadband measurement with sharp directivity.
· Mounted on a fixed base, and receive and measure in horizontal / vertical plane using rotating mechanism.
· Antenna evaluation such as mobile phone, wireless LAN terminal, base station.
· Same as shield sheet equipped on the front of main body.
· Set on the maintenance door side.
· For drawing IF and coaxial, optical fiber and special cable.
Maintenance door : Work efficiency improves when changing the antenna.
Doubleridge horn antenna set
Shield sheet (Maintenance door side) Wooden base
Log periodic antenna set
2987-2, KOBIKI-CHO, HACHIOJI-SHI, TOKYO 193-0934 JAPAN
URL : http://www.micronix-jp.comTEL:+81-42-637-3667 FAX:+81-42-637-0227
E-mail : [email protected]
MICRONIX CORPORATION