Download - e.d.teaching Schedule
HOLY MARY INSTITUTE OF TECHNOLOGY
(COLLEGE OF ENGINEERING)
Bogaram(v),Keesara(M),RR.Dist-501301
DEPARTMENT OF MECHANICAL ENGINEERING
TEACHING SCHEDULE
Faculty : V.Sandeepa Designation : Asst ProfessorClass : I B.Tech Subject : Engineering Graphics.
Unit No. Name of the Topic
No.of Periods required
Total Periods / Unit
No.of Periods-available
Action Plan for backlogs
I
INTRODUCTION TO ENGINEERING DRAWING :
1
21 120
3 Extra periods
per week from
4.00 PM to4.50 PM
Principles of Engineering Graphics and their Significance
1
Drawing Instruments and their Use
1
Conventions in Drawing – Lettering – BIS Conventions.
3
Curves used in Engineering Practice & their Constructions
3
Conic Sections including the Rectangular Hyperbola – General method only
3
Cycloid, Epicycloid and Hypocycloid
3
Involute. 3Scales: Different types of Scales, Plain scales comparative scales, scales of chords
3
II
DRAWING OF PROJECTIONS OR VIEWS ORTHOGRAPHIC PROJECTION IN FIRST ANGLEPROJECTION
2
11 99
3 Extra periods
per week from
4.00 PM to4.50 PM
Principles of Orthographic Projections
3
Conventions – First and Third Angle
3
Projections ofPoints and Lines inclined to both planes True lengths, traces.
3
III PROJECTIONS OF PLANES & SOLIDS:
2 11 88 2 Extra periods
per week from
4.00 PM to4.50 PM
Projections of regular Planes, 3auxiliary planes and Auxiliaryprojection inclined to both planes
3
Projections of Regular Solids inclined to both planes – Auxiliary Views.
3
IV
SECTIONS AND SECTIONAL VIEWS:-
2
23 77
Right Regular Solids 3Prism, Cylinder, Pyramid, Cone 3Auxiliary views. 3DEVELOPMENT AND INTERPENETRATION OF SOLIDS:
3
Development of Surfaces of Right
3
Regular Solids – Prisms, Cylinder, Pyramid Cone and their parts
3
Interpenetration of Right Regular Solids
3
V
INTERSECTION OF SOLIDS:- 3
12 54Intersection of Cylinder Vs Cylinder
3
Cylinder Vs Prism, 3Cylinder Vs Cone. 3
VI
ISOMETRIC PROJECTIONS 3
21 42
Principles of Isometric Projection
3
Isometric Scale – Isometric Views
3
Conventions – Isometric Views of Lines
3
Plane Figures, Simple and Compound Solids
3
Isometric Projection of objects having non- isometric lines
3
Isometric Projection of Spherical Parts.
3
VII
TRANSFORMATION OF ROJECTIONS
3
9 21Conversion of Isometric Views to Orthographic Views
3
Conventions. 3
VIII
PERSPECTIVE PROJECTIONS 3
12 Nil
Perspective View : Points, Lines, Plane Figures
3
Perspective View : Simple Solids,
3
Vanishing Point Methods (General Method only).
3
Signature of Faculty Signature of HOD Signature of Principal