ECONOMIC EFFICIENCY OF SEISMIC VULNEARBILITY AND RETROFIT MEASURES - A MULTICRITERIA ANALYSISIuliana ArmaşMaria Boştenaru
Overview
Analysis scales Review existing Methods Actors Ontology Indicators Analytical hierarchy Automated methods Structural – socio-economic analysis
interdependence Conclusions
Analysis scales
Element Building Neighbourhoo
d/city level
Existing methods
Urban scale At urban planning level there were Fingerhuth and Koch who clarified the
moderating role of the architect, among experts, passive public and active affected people.
At regional planning level it was Strassert (1995) developing a method of balancing we will later employ.
Building scale Inclusion of the factor cost into multicriteria decision analysis has been
done more recently by the team of Caterino et al (2007 and 2009), with a view to bracing of a reinforced concrete building, but employing passive damping.
For technical decision we built upon the book of Malczewski (1999) regarding spatial problems.
For the role of the architect Richter (course work) made a role model in the decision space between goals, resources, benefits and costs.
In renovation the model used in Weissenhof was described by Nägele (1992). Also Nägele (1992) employed balancing.
The ATC-40 considers a series of actors specifically for seismic retrofit. Both the latter employ matrixes (decision tables).
The role of the users were considered also by Ottokar Uhl in the model developed for the Hollabrunn in the 1970s, the glory time of participatism.
Urban scale - Actors
Geologist Civil engineer Economic-
inhabitant Social -
inhabitant
Building - Actors
Architect Civil
engineer Social -
inhabitant Economic -
investor
Actors in WHE Architect Civil engineer Socio-economic
aspects Proiect
management
Exemple of interwar building WHE WHE
Building ontology > IT
Indicators building
Indicators in WHE Taxonomy in progress
Urban ontology (COST TU0801 training school) Sisi
Analitical hierarchy urban
Indicatori - urban
Methods of indicator aggregation
pair-wise comparison and outranking techniques were used to weight the relative importance of alternatives in the groups of sub-criteria, based on expert knowledge.
Analytical hierarchy building
Interdependence structural – socio-economic
Otpt No: 73 Time= 9,3360, spallig reached. Elm: Cb51ba. Unc Conc Strain = -0.002173 - G.p.(b)Otpt No: 73 Time= 9,3360, spallig reached. Elm: Cb2051a. Unc Conc Strain = -0.002116 - G.p.(b)Otpt No: 73 Time= 9,3360, spallig reached. Elm: C2031a. Unc Conc Strain = -0.002198 - G.p.(b)Otpt No: 73 Time= 9,3360, yield reached. Elm: C11bb. Steel Strain = 0.002502 - G.p.(a)Otpt No: 73 Time= 9,3360, yield reached. Elm: C2011a. Steel Strain = 0.002633 - G.p.(b)Otpt No: 73 Time= 9,3360, fracture reached. Elm: C2011b. Steel Strain = 0.069858 - G.p.(a)Otpt No: 73 Time= 9,3360, fracture reached. Elm: C2011b. Steel Strain = 0.109096 - G.p.(b)Otpt No: 73 Time= 9,3360, crush reached. Elm: C2011b. Conf Conc Strain = -0.007241 - G.p.(a)Otpt No: 73 Time= 9,3360, crush reached. Elm: C2011b. Conf Conc Strain = -0.04781 - G.p.(b)Otpt No: 73 Time= 9,3360, yield reached. Elm: C5011b. Steel Strain = 0.005749 - G.p.(a)
Typical log-file output
Otpt No: Time= reached Elm: Mat 1 Mat 2 Strain = Gauss point
1 0.1500, crack_cover bmz3412. Unc Conc 0.000107 G.p.(b) 1 0.1500, crack_core bmz2511. Conf Conc 0.000101 G.p.(a) 1 0.1500, crack_cover bmz2511. Unc Conc 0.000113 G.p.(a) 1 0.1500, crack_core bmz2512. Conf Conc 0.000108 G.p.(b) 1 0.1500, crack_cover bmz2512. Unc Conc 0.000122 G.p.(b) 1 0.1500, crack_cover bmz4411. Unc Conc 0.000101 G.p.(a) 1 0.1500, crack_cover bmz4412. Unc Conc 0.000109 G.p.(b) 1 0.1500, crack_core bmz3511. Conf Conc 0.000104 G.p.(a) 1 0.1500, crack_cover bmz3511. Unc Conc 0.000116 G.p.(a) 1 0.1500, crack_core bmz3512. Conf Conc 0.000111 G.p.(b)
Log-file output imported in MS Excell
ID Otpt No: Time= reached Elm: Mat 1 Mat 2 Strain = Gauss point
1 1 0.1500, crack_cover bmz3412. Unc Conc 0.000107 G.p.(b)
2 1 0.1500, crack_core bmz2511. Conf Conc 0.000101 G.p.(a)
3 1 0.1500, crack_cover bmz2511. Unc Conc 0.000113 G.p.(a)
4 1 0.1500, crack_core bmz2512. Conf Conc 0.000108 G.p.(b)
5 1 0.1500, crack_cover bmz2512. Unc Conc 0.000122 G.p.(b)
6 1 0.1500, crack_cover bmz4411. Unc Conc 0.000101 G.p.(a)
7 1 0.1500, crack_cover bmz4412. Unc Conc 0.000109 G.p.(b)
8 1 0.1500, crack_core bmz3511. Conf Conc 0.000104 G.p.(a)
9 1 0.1500, crack_cover bmz3511. Unc Conc 0.000116 G.p.(a)
10 1 0.1500, crack_core bmz3512. Conf Conc 0.000111 G.p.(b)
Log-file imported in MS Access
Gesamtsumme von ID yield crush spall crack_core crack_cover element
15 4 1 2 4 4 bmx121
14 4 2 4 4 bmx122
14 4 2 4 4 bmx133
14 4 2 4 4 bmx141
14 4 2 4 4 bmx142
10 2 4 4 bmx152
10 2 4 4 bmx153
10 2 4 4 bmx154
8 4 4 bmx161
8 4 4 bmx162
MS Access query
Formulas – principle of addition
Reparation of a column damaged till yield/crush =
48,16 x + 1 x + 270 x + 10 x + 25 x + 1 x
(1)
Reparation of a column damaged till reinforcement
yield/concrete crush =
41,68 x + 1 x + 2 x + 270 x + 0,9 x + 2,4 x + 1 x + 0,75 x
(2)
Reparation of a column damaged till spall =
22,67 x + 0,33 x + 270 x + 10 x + 25 x + 0,33 x
(3)
Reparation of a beam damaged till spall =
23,91 x + 0,0572 x + 0,8 x + 0,009 x + 0,18 x
(4)
Reparation of a column with rifts = 36,48 x + 4,8 x + 0,015 x + 4,8
x
(5)
Reparation of a beam with rifts = 38 x + 6,75 x + 0,015 x + 6,75 x (6)
The formulas are based on the devices. The unknown depend on country and time as
follows:
- is he hour salary,
- is the price for bringing away concrete,
- is the price for 1kg steel,
- is the price for scaffolding 1m²,
- is the price for supporting the scaffolding 1m,
- is the preice for 1m³ concrete,
- is the price for a hole in the slab,
- is he price for 1m² plastering,
- is the approximative price for injection materials,
- is the price for brining away the old plastering (1m³).
Total reparation cost = reparation cost for yield/crush colum x nr. of yield crush/columns +Reparation cost for spall column x nr. of spall columns +Reparation cost for rifts colum x nr. of rifted colums +Reparation cost for yield/crush beam x nr. of yield/crush beams +Reparation cost for spall beam x nr. of spall beams +Reparation cost for rifts beam x nr. of rift beams
While the numbers can be counted with the procedure shown before
Total preventive retrofit costs =Costs for a measures device x nr. of elements
Alternatively a project management software can be employed.
Moment of the measure
Extent of the measure
Extent of the measureCosts
ReparationRebuilding
Retrofit
Comparison to agent based automated method Computer tools can aid local decision makers in
postearthquake disaster staff. Fiedrich (2004) proposed the integrative model EQ-RESQUE to support the prioritisation of intervention zones and the efficient allocation of help-and-rescue resources through action proposals. A distributed simulation system (high level architecture) connects its two interacting components:
simulation of the dynamic disaster environment and of the work of resources;
decision process modelling using software agents mathematically optimised with expert knowledge concerning the multiple tasks and the communication structures and decision competences within the disaster staff.
Conclusions
Positive aspects: Easy to follow and to understand
decision process, especially for the stakeholders
Drawbacks: Subjective approache to a high degree
Improvement proposals: New algorythm ?
Thank you
Iuliana ArmaşMaria Boştenaru
Bucharest