Download - Ece 334 lecture 15-mosfet-basics
![Page 1: Ece 334 lecture 15-mosfet-basics](https://reader033.vdocuments.site/reader033/viewer/2022061103/53f4d2558d7f728e318b4953/html5/thumbnails/1.jpg)
Chapter 5Field-Effect Transistors
![Page 2: Ece 334 lecture 15-mosfet-basics](https://reader033.vdocuments.site/reader033/viewer/2022061103/53f4d2558d7f728e318b4953/html5/thumbnails/2.jpg)
Chapter Goals• Describe operation of MOSFETs and JFETs.• Define MOSFET characteristics in operation regions of cutoff,
triode and saturation.• Discuss mathematical models for i-v characteristics of
MOSFETs and JFETs.• Introduce graphical representations for output and transfer
characteristic descriptions of electronic devices.• Define and contrast characteristics of enhancement-mode and
depletion-mode MOFETs.• Define symbols to represent MOSFETs in circuit schematics.• Investigate circuits that bias transistors into different
operating regions.• MOSFET and JFET DC circuit analysis• Explore MOSFET modeling in SPICE
![Page 3: Ece 334 lecture 15-mosfet-basics](https://reader033.vdocuments.site/reader033/viewer/2022061103/53f4d2558d7f728e318b4953/html5/thumbnails/3.jpg)
![Page 4: Ece 334 lecture 15-mosfet-basics](https://reader033.vdocuments.site/reader033/viewer/2022061103/53f4d2558d7f728e318b4953/html5/thumbnails/4.jpg)
Types of Field-Effect Transistors
• MOSFET (Metal-Oxide Semiconductor Field-Effect Transistor)– Primary component in high-density VLSI chips
such as memories and microprocessors• JFET (Junction Field-Effect Transistor)
– Finds application especially in analog and RF circuit design
![Page 5: Ece 334 lecture 15-mosfet-basics](https://reader033.vdocuments.site/reader033/viewer/2022061103/53f4d2558d7f728e318b4953/html5/thumbnails/5.jpg)
The MOS Transistor
PolysiliconAluminum
![Page 6: Ece 334 lecture 15-mosfet-basics](https://reader033.vdocuments.site/reader033/viewer/2022061103/53f4d2558d7f728e318b4953/html5/thumbnails/6.jpg)
The NMOS Transistor Cross Section
n areas have been doped with donor ions (arsenic) of concentration ND - electrons are the majority carriers
p areas have been doped with acceptor ions (boron) of concentration NA - holes are the majority carriers
Gate oxide
n+Source Drain
p substrate
Bulk (Body)
p+ stopper
Field-Oxide(SiO2)n+
Polysilicon Gate
L
W
![Page 7: Ece 334 lecture 15-mosfet-basics](https://reader033.vdocuments.site/reader033/viewer/2022061103/53f4d2558d7f728e318b4953/html5/thumbnails/7.jpg)
MOS Capacitor Structure• First electrode - Gate :
Consists of low-resistivity material such as highly-doped polycrystalline silicon, aluminum or tungsten
• Second electrode - Substrate or Body: n- or p-type semiconductor
• Dielectric - Silicon dioxide: stable high-quality electrical insulator between gate and substrate.
![Page 8: Ece 334 lecture 15-mosfet-basics](https://reader033.vdocuments.site/reader033/viewer/2022061103/53f4d2558d7f728e318b4953/html5/thumbnails/8.jpg)
Substrate Conditions for Different Biases
AccumulationVG << VTN
DepletionVG < VTN
InversionVG > VTN
![Page 9: Ece 334 lecture 15-mosfet-basics](https://reader033.vdocuments.site/reader033/viewer/2022061103/53f4d2558d7f728e318b4953/html5/thumbnails/9.jpg)
Low-frequency C-V Characteristics for MOS Capacitor on P-type Substrate
• MOS capacitance is non-linear function of voltage.
• Total capacitance in any region dictated by the separation between capacitor plates.
• Total capacitance modeled as series combination of fixed oxide capacitance and voltage-dependent depletion layer capacitance.
![Page 10: Ece 334 lecture 15-mosfet-basics](https://reader033.vdocuments.site/reader033/viewer/2022061103/53f4d2558d7f728e318b4953/html5/thumbnails/10.jpg)
NMOS Transistor: Structure• 4 device terminals: Gate(G),
Drain(D), Source(S) and Body(B).
• Source and drain regions form pn junctions with substrate.
• vSB, vDS and vGS always positive during normal operation.
• vSB must always reverse bias the pn junctions
![Page 11: Ece 334 lecture 15-mosfet-basics](https://reader033.vdocuments.site/reader033/viewer/2022061103/53f4d2558d7f728e318b4953/html5/thumbnails/11.jpg)
![Page 12: Ece 334 lecture 15-mosfet-basics](https://reader033.vdocuments.site/reader033/viewer/2022061103/53f4d2558d7f728e318b4953/html5/thumbnails/12.jpg)
![Page 13: Ece 334 lecture 15-mosfet-basics](https://reader033.vdocuments.site/reader033/viewer/2022061103/53f4d2558d7f728e318b4953/html5/thumbnails/13.jpg)
![Page 14: Ece 334 lecture 15-mosfet-basics](https://reader033.vdocuments.site/reader033/viewer/2022061103/53f4d2558d7f728e318b4953/html5/thumbnails/14.jpg)
The Threshold VoltageVT = VT0 + (|-2F + VSB| - |-2F|)
where VT0 is the threshold voltage at VSB = 0 and is mostly a function of the
manufacturing process– Difference in work-function between gate and substrate
material, oxide thickness, Fermi voltage, charge of impurities trapped at the surface, dosage of implanted ions, etc.
VSB is the source-bulk voltage
F = -Tln(NA/ni) is the Fermi potential (T = kT/q = 26mV at 300K is the thermal voltage; NA is the acceptor ion concentration; ni 1.5x1010 cm-3 at 300K is the intrinsic carrier concentration in pure silicon)
= (2qsiNA)/Cox is the body-effect coefficient (impact of changes in VSB) (si=1.053x10-10F/m is the permittivity of silicon; Cox = ox/tox is the gate oxide capacitance with ox=3.5x10-11F/m)
![Page 15: Ece 334 lecture 15-mosfet-basics](https://reader033.vdocuments.site/reader033/viewer/2022061103/53f4d2558d7f728e318b4953/html5/thumbnails/15.jpg)
The Body Effect
0.40.450.50.550.60.650.70.750.80.850.9
-2.5 -2 -1.5 -1 -0.5 0VBS (V)
VT (
V)
VSB is the substrate bias voltage (normally positive for n-channel devices with the body tied to ground)
A negative bias causes VT to increase from 0.45V to 0.85V
![Page 16: Ece 334 lecture 15-mosfet-basics](https://reader033.vdocuments.site/reader033/viewer/2022061103/53f4d2558d7f728e318b4953/html5/thumbnails/16.jpg)
NMOS Transistor: Triode Region Characteristics
![Page 17: Ece 334 lecture 15-mosfet-basics](https://reader033.vdocuments.site/reader033/viewer/2022061103/53f4d2558d7f728e318b4953/html5/thumbnails/17.jpg)
• It is to be noted that the VDS measured relative to the source increases from 0 to VDS as we travel along the channel from source to drain. This is because the voltage between the gate and points along the channel decreases from VGS at the source end to VGS-VDS.
• When VDS is increased to the value that reduces the voltage between the gate and channel at the drain end to Vt that is ,
• VGS-VDS=Vt or VDS= VGS-Vt or VDS(sat) ≥ VGS-Vt
Concept of Asymmetric Channel
![Page 18: Ece 334 lecture 15-mosfet-basics](https://reader033.vdocuments.site/reader033/viewer/2022061103/53f4d2558d7f728e318b4953/html5/thumbnails/18.jpg)
Transistor in Saturation Mode
SD
B
GVGS VDS > VGS - VT
ID
VGS - VT- +n+ n+
Pinch-off
Assuming VGS > VT
VDS
The current remains constant (saturates).
![Page 19: Ece 334 lecture 15-mosfet-basics](https://reader033.vdocuments.site/reader033/viewer/2022061103/53f4d2558d7f728e318b4953/html5/thumbnails/19.jpg)
NMOS Transistor: Saturation Region
TNGSDSTNGSD VvvVvL
WnKi
for
2
'2
vDSAT vGS VTN is called the saturation or pinch-off voltage
![Page 20: Ece 334 lecture 15-mosfet-basics](https://reader033.vdocuments.site/reader033/viewer/2022061103/53f4d2558d7f728e318b4953/html5/thumbnails/20.jpg)
Channel-Length Modulation
• As vDS increases above
vDSAT, the length of the depleted channel beyond pinch-off point, DL, increases and actual L decreases.
• iD increases slightly with vDS instead of being constant.
iD K
n
'
2
W
LvGS VTN
2 1v
DS
channel length modulation
parameter
![Page 21: Ece 334 lecture 15-mosfet-basics](https://reader033.vdocuments.site/reader033/viewer/2022061103/53f4d2558d7f728e318b4953/html5/thumbnails/21.jpg)
![Page 22: Ece 334 lecture 15-mosfet-basics](https://reader033.vdocuments.site/reader033/viewer/2022061103/53f4d2558d7f728e318b4953/html5/thumbnails/22.jpg)
![Page 23: Ece 334 lecture 15-mosfet-basics](https://reader033.vdocuments.site/reader033/viewer/2022061103/53f4d2558d7f728e318b4953/html5/thumbnails/23.jpg)
(pCox)
![Page 24: Ece 334 lecture 15-mosfet-basics](https://reader033.vdocuments.site/reader033/viewer/2022061103/53f4d2558d7f728e318b4953/html5/thumbnails/24.jpg)
![Page 25: Ece 334 lecture 15-mosfet-basics](https://reader033.vdocuments.site/reader033/viewer/2022061103/53f4d2558d7f728e318b4953/html5/thumbnails/25.jpg)
![Page 26: Ece 334 lecture 15-mosfet-basics](https://reader033.vdocuments.site/reader033/viewer/2022061103/53f4d2558d7f728e318b4953/html5/thumbnails/26.jpg)
Enhancement-Mode PMOS Transistors: Structure
• p-type source and drain regions in n-type substrate.
• vGS < 0 required to create p-type inversion layer in channel region
• For current flow, vGS < vTP
• To maintain reverse bias on source-substrate and drain-substrate junctions, vSB < 0 and vDB < 0
• Positive bulk-source potential causes VTP to become more negative
![Page 27: Ece 334 lecture 15-mosfet-basics](https://reader033.vdocuments.site/reader033/viewer/2022061103/53f4d2558d7f728e318b4953/html5/thumbnails/27.jpg)
![Page 28: Ece 334 lecture 15-mosfet-basics](https://reader033.vdocuments.site/reader033/viewer/2022061103/53f4d2558d7f728e318b4953/html5/thumbnails/28.jpg)
![Page 29: Ece 334 lecture 15-mosfet-basics](https://reader033.vdocuments.site/reader033/viewer/2022061103/53f4d2558d7f728e318b4953/html5/thumbnails/29.jpg)
![Page 30: Ece 334 lecture 15-mosfet-basics](https://reader033.vdocuments.site/reader033/viewer/2022061103/53f4d2558d7f728e318b4953/html5/thumbnails/30.jpg)
Depletion-Mode MOSFETS
• NMOS transistors with• Ion implantation process is used to form a built-in n-type channel
in the device to connect source and drain by a resistive channel• Non-zero drain current for vGS = 0; negative vGS required to turn
device off.
VTN 0
![Page 31: Ece 334 lecture 15-mosfet-basics](https://reader033.vdocuments.site/reader033/viewer/2022061103/53f4d2558d7f728e318b4953/html5/thumbnails/31.jpg)
![Page 32: Ece 334 lecture 15-mosfet-basics](https://reader033.vdocuments.site/reader033/viewer/2022061103/53f4d2558d7f728e318b4953/html5/thumbnails/32.jpg)
![Page 33: Ece 334 lecture 15-mosfet-basics](https://reader033.vdocuments.site/reader033/viewer/2022061103/53f4d2558d7f728e318b4953/html5/thumbnails/33.jpg)
Problem-solving Technique :MOSFET DC Analysis
• STep1: Requires knowing the bias condition of the transistor such as cutoff or saturation or nonsaturation.
• Step2: If the bias condition is not obvious, one must guess the bias condition before analyzing the circuit.
• Step3 How can we Guess? (i) Assume that the transistor is biased in
the saturation region, which implies that:
VGS>VTN, ID>0, and VDS≥VDS(sat)If all the above conditions are satisfied,
analyze the circuit using the saturation current voltage relations.
(ii) If VGS<VTN, then transistor is probably in cutoff mode.
(iii) If VDS<VDS(sat), the transistor is likely biased in nonsaturation region, analyze the circuit using nonsaturation current voltage relations.
![Page 34: Ece 334 lecture 15-mosfet-basics](https://reader033.vdocuments.site/reader033/viewer/2022061103/53f4d2558d7f728e318b4953/html5/thumbnails/34.jpg)
MOSFET Circuit Symbols
• (g) and (i) are the most commonly used symbols in VLSI logic design.
• MOS devices are symmetric.
• In NMOS, n+ region at higher voltage is the drain.
• In PMOS p+ region at lower voltage is the drain
![Page 35: Ece 334 lecture 15-mosfet-basics](https://reader033.vdocuments.site/reader033/viewer/2022061103/53f4d2558d7f728e318b4953/html5/thumbnails/35.jpg)
Summary of the MOSFET Current-Voltage relationship
Table 5.1