Mini Drive-Lock Pilot Twist Drill
• Single Patient 1.2mm diameter - Sterile ..............................MDLSPD
• Single Patient 1.2mm diameter 13mm Long - Sterile ........MDLSPDL
Mini Drive-Lock Contra Angle Driver
• Contra Angle Driver .......................................................... MDLCAD
Mini Drive-Lock Ratchet Drivers
Use as an MDL® Hand Driver or with a Surgical Ratchet Wrench
• Mini Drive-Lock Ratchet Driver .......................................... MDLRD
• Mini Drive-Lock Ratchet Driver, Long................................ MDLRDL
Mini Drive-Lock Manual Wrench
• Connects to the Mini Drive-Lock Ratchet Driver................ MDLMW
Surgical Ratchet Wrench
• With standard 4 x 4mm connection, autoclavable .................... SRA
Tissue Punch
• Latch Tissue Punch ø3mm .................................................... RPCA3
Ref No.
Ref No.
MDLCAD
MDLSPD
MDLSPDL
MDLMW
SRA
MDLRDLMDLRD
RPCA3
Implant Insertion Instruments
Drills, Implant Insertion Instruments
Drive-Lock™ Technology
• Package-to-Site, Direct Delivery
• Contra-Angle or Ratchet Driver
• Ergonomic Design� � �
Predictable and efficient delivery and placement are achieved with Drive-Lock™ technology. MDL® Implants can be
removed from their sterile vial, transferred directly to the surgical site and threaded into place all in one fluid,
ergonomic motion.
Components and Ancillary Items
Torque-Lock®
Small Diameter Implants demand initial stability and adequate insertion torque to ensure lasting success. Torque-Lock® Ratchet Wrench eliminates any guesswork. It can accurately determine torque forces from 10 to 50 Ncm. Torque-Lock® utilizes a patented technology of rubies and sapphires as bearing surfaces that provide minimal friction on the return stroke. They also resist the accumulation of blood and saliva and guarantee precision.
Mini Drive-Lock Surgical Box
Accommodates all MDL® surgical instruments
for MDL® Implant delivery and placement.
Also accommodates MILO® Instrumentation.
• Laser etched Stainless Steel insert
• Mandibular denture model excellent for patient education
and marketing.
• Four implants, O-Rings and housing.
Ref No.
TL
Ref No.
MLSK
Ref No.
MDLMOD
Mini Drive-Lock Surgical Box
MDL® Patient Education Model
Torque-Lock ®
Small Diameter Implants demand initial stability and adequate insertion torque to ensure lasting success. Torque-Lock® Ratchet
Wrench eliminates any guesswork. It can accurately determine torque forces from 10 to 50 Ncm. Torque-Lock® utilizes a
patented technology of rubies and sapphires as bearing surfaces that provide minimal friction on the return stroke. They also
resist the accumulation of blood and saliva and guarantees extremely consistent precision.
Components and Ancillary Items
Accommodates all MDL® surgical instruments for MDL® Implant delivery and placement. Also accommodates MILO® Instrumentation.
• Laser etched Stainless Steel insert
Patient Education Model
Accommodates all MDL® surgical instruments
for MDL® Implant delivery and placement.
Also accommodates MILO® Instrumentation.
• Laser etched Stainless Steel insert
• Mandibular denture model excellent for patient education
and marketing.
• Four implants, O-Rings and housing.
Ref No.
TL
Ref No.
MLSK
Ref No.
MDLMOD
Mini Drive-Lock Surgical Box
MDL® Patient Education Model
Torque-Lock ®
Small Diameter Implants demand initial stability and adequate insertion torque to ensure lasting success. Torque-Lock® Ratchet
Wrench eliminates any guesswork. It can accurately determine torque forces from 10 to 50 Ncm. Torque-Lock® utilizes a
patented technology of rubies and sapphires as bearing surfaces that provide minimal friction on the return stroke. They also
resist the accumulation of blood and saliva and guarantees extremely consistent precision.
Components and Ancillary Items
Denture and Crown & Bridge models are excellent for patient education and marketing.
Implant Insertion Instruments
Drive-Lock® Technology• Package-to-Site, Direct Delivery• Contra-Angle or Ratchet Driver• Ergonomic Design
Mini Dental Implants
Please contact us with any enquiries or visit our website for more information
(03) 9893 2399 or [email protected] www.idhealth.net
Intra-Lock® , MDL®, MILO® and Ossean® are registered trademarks of Intra-Lock International, Inc.
Mini Drive-Lock Pilot Twist Drill
• Single Patient 1.2mm diameter - Sterile ..............................MDLSPD
• Single Patient 1.2mm diameter 13mm Long - Sterile ........MDLSPDL
Mini Drive-Lock Contra Angle Driver
• Contra Angle Driver .......................................................... MDLCAD
Mini Drive-Lock Ratchet Drivers
Use as an MDL® Hand Driver or with a Surgical Ratchet Wrench
• Mini Drive-Lock Ratchet Driver .......................................... MDLRD
• Mini Drive-Lock Ratchet Driver, Long................................ MDLRDL
Mini Drive-Lock Manual Wrench
• Connects to the Mini Drive-Lock Ratchet Driver................ MDLMW
Surgical Ratchet Wrench
• With standard 4 x 4mm connection, autoclavable .................... SRA
Tissue Punch
• Latch Tissue Punch ø3mm .................................................... RPCA3
Ref No.
Ref No.
MDLCAD
MDLSPD
MDLSPDL
MDLMW
SRA
MDLRDLMDLRD
RPCA3
Implant Insertion Instruments
Drills, Implant Insertion Instruments
Drive-Lock™ Technology
• Package-to-Site, Direct Delivery
• Contra-Angle or Ratchet Driver
• Ergonomic Design� � �
Predictable and efficient delivery and placement are achieved with Drive-Lock™ technology. MDL® Implants can be
removed from their sterile vial, transferred directly to the surgical site and threaded into place all in one fluid,
ergonomic motion.
Mini Drive-Lock™ Ratchet Driver ... MDLRD
Mini Drive-Lock Pilot Twist Drill
• Single Patient 1.2mm diameter - Sterile ..............................MDLSPD
• Single Patient 1.2mm diameter 13mm Long - Sterile ........MDLSPDL
Mini Drive-Lock Contra Angle Driver
• Contra Angle Driver .......................................................... MDLCAD
Mini Drive-Lock Ratchet Drivers
Use as an MDL® Hand Driver or with a Surgical Ratchet Wrench
• Mini Drive-Lock Ratchet Driver .......................................... MDLRD
• Mini Drive-Lock Ratchet Driver, Long................................ MDLRDL
Mini Drive-Lock Manual Wrench
• Connects to the Mini Drive-Lock Ratchet Driver................ MDLMW
Surgical Ratchet Wrench
• With standard 4 x 4mm connection, autoclavable .................... SRA
Tissue Punch
• Latch Tissue Punch ø3mm .................................................... RPCA3
Ref No.
Ref No.
MDLCAD
MDLSPD
MDLSPDL
MDLMW
SRA
MDLRDLMDLRD
RPCA3
Implant Insertion Instruments
Drills, Implant Insertion Instruments
Drive-Lock™ Technology
• Package-to-Site, Direct Delivery
• Contra-Angle or Ratchet Driver
• Ergonomic Design� � �
Predictable and efficient delivery and placement are achieved with Drive-Lock™ technology. MDL® Implants can be
removed from their sterile vial, transferred directly to the surgical site and threaded into place all in one fluid,
ergonomic motion.
Mini Drive-Lock™ Ratchet Driver, Long ... MDLRDL
Mini Drive-Lock Pilot Twist Drill
• Single Patient 1.2mm diameter - Sterile ..............................MDLSPD
• Single Patient 1.2mm diameter 13mm Long - Sterile ........MDLSPDL
Mini Drive-Lock Contra Angle Driver
• Contra Angle Driver .......................................................... MDLCAD
Mini Drive-Lock Ratchet Drivers
Use as an MDL® Hand Driver or with a Surgical Ratchet Wrench
• Mini Drive-Lock Ratchet Driver .......................................... MDLRD
• Mini Drive-Lock Ratchet Driver, Long................................ MDLRDL
Mini Drive-Lock Manual Wrench
• Connects to the Mini Drive-Lock Ratchet Driver................ MDLMW
Surgical Ratchet Wrench
• With standard 4 x 4mm connection, autoclavable .................... SRA
Tissue Punch
• Latch Tissue Punch ø3mm .................................................... RPCA3
Ref No.
Ref No.
MDLCAD
MDLSPD
MDLSPDL
MDLMW
SRA
MDLRDLMDLRD
RPCA3
Implant Insertion Instruments
Drills, Implant Insertion Instruments
Drive-Lock™ Technology
• Package-to-Site, Direct Delivery
• Contra-Angle or Ratchet Driver
• Ergonomic Design� � �
Predictable and efficient delivery and placement are achieved with Drive-Lock™ technology. MDL® Implants can be
removed from their sterile vial, transferred directly to the surgical site and threaded into place all in one fluid,
ergonomic motion.
Mini Drive-Lock™ Wrench connects to the Mini Drive-Lock
Ratchet Driver ... MDLMW
One-Piece Implant. Multiple Applications
Mini Drive-Lock (MDL®) is Intra-Lock’s one-piece small diameter dental implant. The system is ideal for long-term denture stabilization or fixed prosthetics. MDL® is a true ‘convertible’ implant with one-piece solid strength and two-piece versatility. Patented Cement-Over™ Abutments, simply fit over the O-Ball Assembly and convert the implant from removable to fixed treatment options.
The system’s unique Drive-Lock™ instruments reduce delivery and placement to one fluid motion. Once in place, Intra-Lock’s extremely hydrophilic, bio-active OSSEAN® Surface promotes rapid early healing and increased biomechanical fixation1.
2.0 + 2.5mm
One-Piece Strength. Two-Piece Versatility
The MILO® Implant System is engineered for the anatomical and physiological demands of long-term denture stabilization or the permanent rehabilitation of single or multiple incisors. The simplified surgical protocol is similar to that of a miniature implant, however, MILO®
has the added advantages of increased bone surface interface, improved load transfer capabilities and greater yield strength.
MILO® is a true convertible implant with one-piece solid strength and two-piece versatility. The Cement-Over Abutments™ provide the clinician with an extensive range of prosthetic options.
MDL2513MDL2513L MDL2013
Leng
th
Act
ive
Leng
th
Mini Drive-Lock (MDL®) is Intra-Lock’s
one-piece small diameter dental implant.
The system is ideal for long-term denture stabilization
or fixed prosthetics. MDL® is a true 'convertible'
implant with one-piece solid strength and two-piece
versatility. Patented* Cement-Over™ Abutments, simply fit
over the O-Ball Assembly and convert the implant from
removable to fixed or orthodontic treatment options. The
system’s unique Drive-Lock™ instruments reduce delivery and
placement to one fluid motion. Once in place, Intra-Lock’s
extremely hydrophilic, bio-active OSSEAN® Surface promotes
rapid early healing and increased biomechanical fixation1.
All implants are packaged with the Micro Metal Housing with O-Ring.
MDL® Mini Drive-Lock Implants, 2.0mm Diameter, OSSEAN® Surface
*Length 10mm 11.5mm 13mm 15mm 18mmRef No. MDL2010 MDL2011 MDL2013 MDL2015 MDL2018
MDL® Mini Drive-Lock Implants, 2.5mm Diameter, OSSEAN® Surface
*Length 10mm 11.5mm 13mm 15mm 18mmRef No. MDL2510 MDL2511 MDL2513 MDL2515 MDL2518
MDL® Mini Drive-Lock Implants, 2.5mm Diameter, Long Collar, OSSEAN® Surface
*Length 10mm 11.5mm 13mm 15mm 18mmRef No. MDL2510L MDL2511L MDL2513L MDL2515L MDL2518L
MDL® Mini Drive-Lock Implant, 2.0mm Provisional, Non-OSSEAN®
*Length 13mmRef No. MDL2013P
MDL® Mini Drive-Lock Implant, 2.5mm Provisional, Non-OSSEAN®
*Length 13mmRef No. MDL2513P
*The actual thread length is 2mm less than the catalog description, regardless of the height of the collar (2mm or 4mm).
Mini Drive-Lock Implants One Implant... Multiple Applications.
• “Long-Term”Applications
• OSSEAN ® SurfaceApplied to Collarand Body
• Cement -Over ™
Abutments
• DirectDelivery
OSSEAN® Surface is characterized by its fractal2 topography that extends beyond thenanoscale level. OSSEAN® has an extremely hydrophilic surface and is impregnatedwith Calcium Phosphate molecules that are incorporated into the surface structure atthe molecular level. Due to this molecular impregnation, binding forces make theCalcium Phosphate exceptionally stable while preserving its bioactive properties.
• “Long Term” Applications• OSSEAN® Surface Applied to
Collar and Body• Cement-Over™ Abutments• Direct Delivery
The MILO™ Implant System is engineered for the anatomical andphysiological demands of long-term denture stabilization or thepermanent rehabilitation of single or multiple incisors. The simplifiedsurgical protocol is similar to that of a miniature implant, however,MILO™ has the added advantages of increased bone surface interface,improved load transfer capabilities and greater yield strength.
MILO™ Implants* are available in five lengths (10, 11.5, 13, 15 and17 mm) and two thread profiles (Fine Pitch and Wide Pitch) thatare engineered to address the clinical quality and quantity of bone.
MILO™ is a true convertible implantwith one-piece solid strength andtwo-piece versatility. The Cement-OverAbutments™** provide the clinicianwith an unsurpassed range ofprosthetic options.
IMPLANT INSERTION INSTRUMENTS
MDLCAD
MDLMW
MDLRD
MILO Contra Angle Driver• Standard Contra Angle .................................................................... MDLCAD
MILO™ Ratchet Drivers
Use as a MILO™ Hand Driver or with a Surgical Ratchet Wrench• Surgical Ratchet Driver ...................................................................... MDLRD• Surgical Ratchet Driver, Long............................................................ MDLRDL
MILO™ Manual Wrench• Connects to the Ratchet Driver ........................................................ MDLMW
Tissue Punch• Latch Tissue Punch ø3mm .................................................................... RPCA3
Surgical Ratchet Wrench• With standard 4x4mm connection, autoclavable ...................................... SRA
Surgical Box• Accommodates all MILO surgical instruments for Implant delivery and placement.
Laser etched Stainless steel insert .......................................................... MLSK
DRILLS• Lancer 0-2mm - Sterile .............................................................................. LD• Pilot Drill ø1.5mm Sterile ........................................................................ D15• Twist Drill ø2.0mm Sterile ........................................................................ D20• Final Drill ø2.5mm - Sterile ...................................................................... D25
MDLRDL
LD
D15
D20
D25
A N D A N C I L L A R Y I T E M S
RPCA3
SRA
ONE-PIECE IMPLANT. MULTIPLE APPLICATIONS.
3
* Pat. #7,033,174** Pat. #7,217,130
MILO™ can be usedwith an O-Ring
and Metal Housingor an abutment
StandardAbutment
DentureStabilization
WideAbutment
AngledAbutment
Denture Stabilization
Standard Abutment
AngledAbutment
WideAbutment
MILO® can be used with an O-Ring and Metal Housing or an abutment
OSSEAN® Surface is characterized by its fractal2 topography that extends beyond the nanoscale level. OSSEAN® has an extremely hydrophilic surface and is impregnated with Calcium Phosphate molecules that are incorporated into the surface structure at the molecular level. Due to this molecular impregnation, binding forces make the Calcium Phosphate exceptionally stable while preserving its bioactive properties.
Cement-Over™ Abutment System
Cement-Over™ Abutments, available in Straight, 15˚ Angled, Wide and Plastic Castable configurations, provide the clinician with an extensive range of prosthetic options. Cement-Over™ Abutments can be prepared extra orally and simply fit over the O-Ball Assembly. Once cemented in place with resin cement, abutment and implant form one unit; resistant and as strong as a one-piece.
MDL2513MDL2513L MDL2013
Leng
th
Act
ive
Leng
th
Mini Drive-Lock (MDL®) is Intra-Lock’s
one-piece small diameter dental implant.
The system is ideal for long-term denture stabilization
or fixed prosthetics. MDL® is a true 'convertible'
implant with one-piece solid strength and two-piece
versatility. Patented* Cement-Over™ Abutments, simply fit
over the O-Ball Assembly and convert the implant from
removable to fixed or orthodontic treatment options. The
system’s unique Drive-Lock™ instruments reduce delivery and
placement to one fluid motion. Once in place, Intra-Lock’s
extremely hydrophilic, bio-active OSSEAN® Surface promotes
rapid early healing and increased biomechanical fixation1.
All implants are packaged with the Micro Metal Housing with O-Ring.
MDL® Mini Drive-Lock Implants, 2.0mm Diameter, OSSEAN® Surface
*Length 10mm 11.5mm 13mm 15mm 18mmRef No. MDL2010 MDL2011 MDL2013 MDL2015 MDL2018
MDL® Mini Drive-Lock Implants, 2.5mm Diameter, OSSEAN® Surface
*Length 10mm 11.5mm 13mm 15mm 18mmRef No. MDL2510 MDL2511 MDL2513 MDL2515 MDL2518
MDL® Mini Drive-Lock Implants, 2.5mm Diameter, Long Collar, OSSEAN® Surface
*Length 10mm 11.5mm 13mm 15mm 18mmRef No. MDL2510L MDL2511L MDL2513L MDL2515L MDL2518L
MDL® Mini Drive-Lock Implant, 2.0mm Provisional, Non-OSSEAN®
*Length 13mmRef No. MDL2013P
MDL® Mini Drive-Lock Implant, 2.5mm Provisional, Non-OSSEAN®
*Length 13mmRef No. MDL2513P
*The actual thread length is 2mm less than the catalog description, regardless of the height of the collar (2mm or 4mm).
Mini Drive-Lock Implants One Implant... Multiple Applications.
• “Long-Term”Applications
• OSSEAN ® SurfaceApplied to Collarand Body
• Cement -Over ™
Abutments
• DirectDelivery
OSSEAN® Surface is characterized by its fractal2 topography that extends beyond thenanoscale level. OSSEAN® has an extremely hydrophilic surface and is impregnatedwith Calcium Phosphate molecules that are incorporated into the surface structure atthe molecular level. Due to this molecular impregnation, binding forces make theCalcium Phosphate exceptionally stable while preserving its bioactive properties.
Universal ToolsMotorized Insertion
Mini Drive-Lock Pilot Twist Drill
• Single Patient 1.2mm diameter - Sterile ..............................MDLSPD
• Single Patient 1.2mm diameter 13mm Long - Sterile ........MDLSPDL
Mini Drive-Lock Contra Angle Driver
• Contra Angle Driver .......................................................... MDLCAD
Mini Drive-Lock Ratchet Drivers
Use as an MDL® Hand Driver or with a Surgical Ratchet Wrench
• Mini Drive-Lock Ratchet Driver .......................................... MDLRD
• Mini Drive-Lock Ratchet Driver, Long................................ MDLRDL
Mini Drive-Lock Manual Wrench
• Connects to the Mini Drive-Lock Ratchet Driver................ MDLMW
Surgical Ratchet Wrench
• With standard 4 x 4mm connection, autoclavable .................... SRA
Tissue Punch
• Latch Tissue Punch ø3mm .................................................... RPCA3
Ref No.
Ref No.
MDLCAD
MDLSPD
MDLSPDL
MDLMW
SRA
MDLRDLMDLRD
RPCA3
Implant Insertion Instruments
Drills, Implant Insertion Instruments
Drive-Lock™ Technology
• Package-to-Site, Direct Delivery
• Contra-Angle or Ratchet Driver
• Ergonomic Design� � �
Predictable and efficient delivery and placement are achieved with Drive-Lock™ technology. MDL® Implants can be
removed from their sterile vial, transferred directly to the surgical site and threaded into place all in one fluid,
ergonomic motion.
Mini Drive-Lock™ Contra Angle Driver ... MDLCAD
Mini Drive-Lock Pilot Twist Drill
• Single Patient 1.2mm diameter - Sterile ..............................MDLSPD
• Single Patient 1.2mm diameter 13mm Long - Sterile ........MDLSPDL
Mini Drive-Lock Contra Angle Driver
• Contra Angle Driver .......................................................... MDLCAD
Mini Drive-Lock Ratchet Drivers
Use as an MDL® Hand Driver or with a Surgical Ratchet Wrench
• Mini Drive-Lock Ratchet Driver .......................................... MDLRD
• Mini Drive-Lock Ratchet Driver, Long................................ MDLRDL
Mini Drive-Lock Manual Wrench
• Connects to the Mini Drive-Lock Ratchet Driver................ MDLMW
Surgical Ratchet Wrench
• With standard 4 x 4mm connection, autoclavable .................... SRA
Tissue Punch
• Latch Tissue Punch ø3mm .................................................... RPCA3
Ref No.
Ref No.
MDLCAD
MDLSPD
MDLSPDL
MDLMW
SRA
MDLRDLMDLRD
RPCA3
Implant Insertion Instruments
Drills, Implant Insertion Instruments
Drive-Lock™ Technology
• Package-to-Site, Direct Delivery
• Contra-Angle or Ratchet Driver
• Ergonomic Design� � �
Predictable and efficient delivery and placement are achieved with Drive-Lock™ technology. MDL® Implants can be
removed from their sterile vial, transferred directly to the surgical site and threaded into place all in one fluid,
ergonomic motion.
Tissue Punch Ø3mm ... RPCA3
Manual Insertion
Mini Drive-Lock Pilot Twist Drill
• Single Patient 1.2mm diameter - Sterile ..............................MDLSPD
• Single Patient 1.2mm diameter 13mm Long - Sterile ........MDLSPDL
Mini Drive-Lock Contra Angle Driver
• Contra Angle Driver .......................................................... MDLCAD
Mini Drive-Lock Ratchet Drivers
Use as an MDL® Hand Driver or with a Surgical Ratchet Wrench
• Mini Drive-Lock Ratchet Driver .......................................... MDLRD
• Mini Drive-Lock Ratchet Driver, Long................................ MDLRDL
Mini Drive-Lock Manual Wrench
• Connects to the Mini Drive-Lock Ratchet Driver................ MDLMW
Surgical Ratchet Wrench
• With standard 4 x 4mm connection, autoclavable .................... SRA
Tissue Punch
• Latch Tissue Punch ø3mm .................................................... RPCA3
Ref No.
Ref No.
MDLCAD
MDLSPD
MDLSPDL
MDLMW
SRA
MDLRDLMDLRD
RPCA3
Implant Insertion Instruments
Drills, Implant Insertion Instruments
Drive-Lock™ Technology
• Package-to-Site, Direct Delivery
• Contra-Angle or Ratchet Driver
• Ergonomic Design� � �
Predictable and efficient delivery and placement are achieved with Drive-Lock™ technology. MDL® Implants can be
removed from their sterile vial, transferred directly to the surgical site and threaded into place all in one fluid,
ergonomic motion.
Surgical Ratchet Wrench with standard 4x4mm connection, autoclavable ... SRA
MDL® DrillMini Drive-Lock Pilot Twist Drill
• Single Patient 1.2mm diameter - Sterile ..............................MDLSPD
• Single Patient 1.2mm diameter 13mm Long - Sterile ........MDLSPDL
Mini Drive-Lock Contra Angle Driver
• Contra Angle Driver .......................................................... MDLCAD
Mini Drive-Lock Ratchet Drivers
Use as an MDL® Hand Driver or with a Surgical Ratchet Wrench
• Mini Drive-Lock Ratchet Driver .......................................... MDLRD
• Mini Drive-Lock Ratchet Driver, Long................................ MDLRDL
Mini Drive-Lock Manual Wrench
• Connects to the Mini Drive-Lock Ratchet Driver................ MDLMW
Surgical Ratchet Wrench
• With standard 4 x 4mm connection, autoclavable .................... SRA
Tissue Punch
• Latch Tissue Punch ø3mm .................................................... RPCA3
Ref No.
Ref No.
MDLCAD
MDLSPD
MDLSPDL
MDLMW
SRA
MDLRDLMDLRD
RPCA3
Implant Insertion Instruments
Drills, Implant Insertion Instruments
Drive-Lock™ Technology
• Package-to-Site, Direct Delivery
• Contra-Angle or Ratchet Driver
• Ergonomic Design� � �
Predictable and efficient delivery and placement are achieved with Drive-Lock™ technology. MDL® Implants can be
removed from their sterile vial, transferred directly to the surgical site and threaded into place all in one fluid,
ergonomic motion.
Mini Drive-Lock Pilot Twist DrillSingle Patient 1.2mm diameter 13mm Long - Sterile ... MDLSPDL
MILO® Drills
The MILO™ Implant System is engineered for the anatomical andphysiological demands of long-term denture stabilization or thepermanent rehabilitation of single or multiple incisors. The simplifiedsurgical protocol is similar to that of a miniature implant, however,MILO™ has the added advantages of increased bone surface interface,improved load transfer capabilities and greater yield strength.
MILO™ Implants* are available in five lengths (10, 11.5, 13, 15 and17 mm) and two thread profiles (Fine Pitch and Wide Pitch) thatare engineered to address the clinical quality and quantity of bone.
MILO™ is a true convertible implantwith one-piece solid strength andtwo-piece versatility. The Cement-OverAbutments™** provide the clinicianwith an unsurpassed range ofprosthetic options.
IMPLANT INSERTION INSTRUMENTS
MDLCAD
MDLMW
MDLRD
MILO Contra Angle Driver• Standard Contra Angle .................................................................... MDLCAD
MILO™ Ratchet Drivers
Use as a MILO™ Hand Driver or with a Surgical Ratchet Wrench• Surgical Ratchet Driver ...................................................................... MDLRD• Surgical Ratchet Driver, Long............................................................ MDLRDL
MILO™ Manual Wrench• Connects to the Ratchet Driver ........................................................ MDLMW
Tissue Punch• Latch Tissue Punch ø3mm .................................................................... RPCA3
Surgical Ratchet Wrench• With standard 4x4mm connection, autoclavable ...................................... SRA
Surgical Box• Accommodates all MILO surgical instruments for Implant delivery and placement.
Laser etched Stainless steel insert .......................................................... MLSK
DRILLS• Lancer 0-2mm - Sterile .............................................................................. LD• Pilot Drill ø1.5mm Sterile ........................................................................ D15• Twist Drill ø2.0mm Sterile ........................................................................ D20• Final Drill ø2.5mm - Sterile ...................................................................... D25
MDLRDL
LD
D15
D20
D25
A N D A N C I L L A R Y I T E M S
RPCA3
SRA
ONE-PIECE IMPLANT. MULTIPLE APPLICATIONS.
3
* Pat. #7,033,174** Pat. #7,217,130
MILO™ can be usedwith an O-Ring
and Metal Housingor an abutment
StandardAbutment
DentureStabilization
WideAbutment
AngledAbutment
Lancer 0-2mm - Sterile ... LD
The MILO™ Implant System is engineered for the anatomical andphysiological demands of long-term denture stabilization or thepermanent rehabilitation of single or multiple incisors. The simplifiedsurgical protocol is similar to that of a miniature implant, however,MILO™ has the added advantages of increased bone surface interface,improved load transfer capabilities and greater yield strength.
MILO™ Implants* are available in five lengths (10, 11.5, 13, 15 and17 mm) and two thread profiles (Fine Pitch and Wide Pitch) thatare engineered to address the clinical quality and quantity of bone.
MILO™ is a true convertible implantwith one-piece solid strength andtwo-piece versatility. The Cement-OverAbutments™** provide the clinicianwith an unsurpassed range ofprosthetic options.
IMPLANT INSERTION INSTRUMENTS
MDLCAD
MDLMW
MDLRD
MILO Contra Angle Driver• Standard Contra Angle .................................................................... MDLCAD
MILO™ Ratchet Drivers
Use as a MILO™ Hand Driver or with a Surgical Ratchet Wrench• Surgical Ratchet Driver ...................................................................... MDLRD• Surgical Ratchet Driver, Long............................................................ MDLRDL
MILO™ Manual Wrench• Connects to the Ratchet Driver ........................................................ MDLMW
Tissue Punch• Latch Tissue Punch ø3mm .................................................................... RPCA3
Surgical Ratchet Wrench• With standard 4x4mm connection, autoclavable ...................................... SRA
Surgical Box• Accommodates all MILO surgical instruments for Implant delivery and placement.
Laser etched Stainless steel insert .......................................................... MLSK
DRILLS• Lancer 0-2mm - Sterile .............................................................................. LD• Pilot Drill ø1.5mm Sterile ........................................................................ D15• Twist Drill ø2.0mm Sterile ........................................................................ D20• Final Drill ø2.5mm - Sterile ...................................................................... D25
MDLRDL
LD
D15
D20
D25
A N D A N C I L L A R Y I T E M S
RPCA3
SRA
ONE-PIECE IMPLANT. MULTIPLE APPLICATIONS.
3
* Pat. #7,033,174** Pat. #7,217,130
MILO™ can be usedwith an O-Ring
and Metal Housingor an abutment
StandardAbutment
DentureStabilization
WideAbutment
AngledAbutment
The MILO™ Implant System is engineered for the anatomical andphysiological demands of long-term denture stabilization or thepermanent rehabilitation of single or multiple incisors. The simplifiedsurgical protocol is similar to that of a miniature implant, however,MILO™ has the added advantages of increased bone surface interface,improved load transfer capabilities and greater yield strength.
MILO™ Implants* are available in five lengths (10, 11.5, 13, 15 and17 mm) and two thread profiles (Fine Pitch and Wide Pitch) thatare engineered to address the clinical quality and quantity of bone.
MILO™ is a true convertible implantwith one-piece solid strength andtwo-piece versatility. The Cement-OverAbutments™** provide the clinicianwith an unsurpassed range ofprosthetic options.
IMPLANT INSERTION INSTRUMENTS
MDLCAD
MDLMW
MDLRD
MILO Contra Angle Driver• Standard Contra Angle .................................................................... MDLCAD
MILO™ Ratchet Drivers
Use as a MILO™ Hand Driver or with a Surgical Ratchet Wrench• Surgical Ratchet Driver ...................................................................... MDLRD• Surgical Ratchet Driver, Long............................................................ MDLRDL
MILO™ Manual Wrench• Connects to the Ratchet Driver ........................................................ MDLMW
Tissue Punch• Latch Tissue Punch ø3mm .................................................................... RPCA3
Surgical Ratchet Wrench• With standard 4x4mm connection, autoclavable ...................................... SRA
Surgical Box• Accommodates all MILO surgical instruments for Implant delivery and placement.
Laser etched Stainless steel insert .......................................................... MLSK
DRILLS• Lancer 0-2mm - Sterile .............................................................................. LD• Pilot Drill ø1.5mm Sterile ........................................................................ D15• Twist Drill ø2.0mm Sterile ........................................................................ D20• Final Drill ø2.5mm - Sterile ...................................................................... D25
MDLRDL
LD
D15
D20
D25
A N D A N C I L L A R Y I T E M S
RPCA3
SRA
ONE-PIECE IMPLANT. MULTIPLE APPLICATIONS.
3
* Pat. #7,033,174** Pat. #7,217,130
MILO™ can be usedwith an O-Ring
and Metal Housingor an abutment
StandardAbutment
DentureStabilization
WideAbutment
AngledAbutment
The MILO™ Implant System is engineered for the anatomical andphysiological demands of long-term denture stabilization or thepermanent rehabilitation of single or multiple incisors. The simplifiedsurgical protocol is similar to that of a miniature implant, however,MILO™ has the added advantages of increased bone surface interface,improved load transfer capabilities and greater yield strength.
MILO™ Implants* are available in five lengths (10, 11.5, 13, 15 and17 mm) and two thread profiles (Fine Pitch and Wide Pitch) thatare engineered to address the clinical quality and quantity of bone.
MILO™ is a true convertible implantwith one-piece solid strength andtwo-piece versatility. The Cement-OverAbutments™** provide the clinicianwith an unsurpassed range ofprosthetic options.
IMPLANT INSERTION INSTRUMENTS
MDLCAD
MDLMW
MDLRD
MILO Contra Angle Driver• Standard Contra Angle .................................................................... MDLCAD
MILO™ Ratchet Drivers
Use as a MILO™ Hand Driver or with a Surgical Ratchet Wrench• Surgical Ratchet Driver ...................................................................... MDLRD• Surgical Ratchet Driver, Long............................................................ MDLRDL
MILO™ Manual Wrench• Connects to the Ratchet Driver ........................................................ MDLMW
Tissue Punch• Latch Tissue Punch ø3mm .................................................................... RPCA3
Surgical Ratchet Wrench• With standard 4x4mm connection, autoclavable ...................................... SRA
Surgical Box• Accommodates all MILO surgical instruments for Implant delivery and placement.
Laser etched Stainless steel insert .......................................................... MLSK
DRILLS• Lancer 0-2mm - Sterile .............................................................................. LD• Pilot Drill ø1.5mm Sterile ........................................................................ D15• Twist Drill ø2.0mm Sterile ........................................................................ D20• Final Drill ø2.5mm - Sterile ...................................................................... D25
MDLRDL
LD
D15
D20
D25
A N D A N C I L L A R Y I T E M S
RPCA3
SRA
ONE-PIECE IMPLANT. MULTIPLE APPLICATIONS.
3
* Pat. #7,033,174** Pat. #7,217,130
MILO™ can be usedwith an O-Ring
and Metal Housingor an abutment
StandardAbutment
DentureStabilization
WideAbutment
AngledAbutment
Pilot Drill Ø1.5mm - Sterile ... D15
Twist Drill Ø2.0mm - Sterile ... D20
Final Drill Ø2.5mm - Sterile ... D25
MDL® AbutmentsCements over O-Ball Assembly for fixed bridges - Straight ... MDLSACements over O-Ball Assembly for fixed bridges - Angulated 15˚ ... MDLAA15Cements over O-Ball Assembly for fixed bridges - Wide ... WCAPlastic Castable Abutment for fixed bridges ... MDLPA
MDL® Impression CopingPick up Impression Coping ... MDLT
MDL® Laboratory AnalogReplicates the MDL® Implant and Abutment ... MDLA
Universal Components
Mini Drive-Lock™ Metal Housing with O-RingO-Ring encapsulated in MICRO Metal Housing ... MDLMMHO-Ring encapsulated in LARGE Metal Housing ... MDLMH
MILO®
3.0mm MILO® Wide Pitch ImplantsProsthetic Connection: 1.8mm O-Ball
Lengths: 10, 11.5, 13, 15 &17mmSurface treatment: Blasted + Progressively Acid Etched Titanium
10mm 11.5mm 13mm 15mm 17mm MLW3010 MLW3011 MLW3013 MLW3015 MLW3017
MDL2513MDL2513L MDL2013
Leng
th
Act
ive
Leng
th
Mini Drive-Lock (MDL®) is Intra-Lock’s
one-piece small diameter dental implant.
The system is ideal for long-term denture stabilization
or fixed prosthetics. MDL® is a true 'convertible'
implant with one-piece solid strength and two-piece
versatility. Patented* Cement-Over™ Abutments, simply fit
over the O-Ball Assembly and convert the implant from
removable to fixed or orthodontic treatment options. The
system’s unique Drive-Lock™ instruments reduce delivery and
placement to one fluid motion. Once in place, Intra-Lock’s
extremely hydrophilic, bio-active OSSEAN® Surface promotes
rapid early healing and increased biomechanical fixation1.
All implants are packaged with the Micro Metal Housing with O-Ring.
MDL® Mini Drive-Lock Implants, 2.0mm Diameter, OSSEAN® Surface
*Length 10mm 11.5mm 13mm 15mm 18mmRef No. MDL2010 MDL2011 MDL2013 MDL2015 MDL2018
MDL® Mini Drive-Lock Implants, 2.5mm Diameter, OSSEAN® Surface
*Length 10mm 11.5mm 13mm 15mm 18mmRef No. MDL2510 MDL2511 MDL2513 MDL2515 MDL2518
MDL® Mini Drive-Lock Implants, 2.5mm Diameter, Long Collar, OSSEAN® Surface
*Length 10mm 11.5mm 13mm 15mm 18mmRef No. MDL2510L MDL2511L MDL2513L MDL2515L MDL2518L
MDL® Mini Drive-Lock Implant, 2.0mm Provisional, Non-OSSEAN®
*Length 13mmRef No. MDL2013P
MDL® Mini Drive-Lock Implant, 2.5mm Provisional, Non-OSSEAN®
*Length 13mmRef No. MDL2513P
*The actual thread length is 2mm less than the catalog description, regardless of the height of the collar (2mm or 4mm).
Mini Drive-Lock Implants One Implant... Multiple Applications.
• “Long-Term”Applications
• OSSEAN ® SurfaceApplied to Collarand Body
• Cement -Over ™
Abutments
• DirectDelivery
OSSEAN® Surface is characterized by its fractal2 topography that extends beyond thenanoscale level. OSSEAN® has an extremely hydrophilic surface and is impregnatedwith Calcium Phosphate molecules that are incorporated into the surface structure atthe molecular level. Due to this molecular impregnation, binding forces make theCalcium Phosphate exceptionally stable while preserving its bioactive properties.
MDL®
MDL® Mini Drive-Lock Implants, 2.0mm Diameter, OSSEAN Surface 10mm 11.5mm 13mm 15mm 18mm MDL2010 MDL2011 MDL2013 MDL2015 MDL2018
MDL® Mini Drive-Lock Implants, 2.5mm Diameter, OSSEAN Surface 10mm 11.5mm 13mm 15mm 18mm MDL2510 MDL2511 MDL2513 MDL2515 MDL2518
MILO® Prosthetic Components
MILO® AbutmentsCements over O-Ball Assembly for fixed bridges - Straight ... MLSACements over O-Ball Assembly for fixed bridges - Angulated 15˚ ... MLAA15Cements over O-Ball Assembly for crowns - Wide ... WCA3Plastic Castable Abutment for fixed bridges ... MLPA
MILO® Impression CopingPick up Impression Coping ... MLT
MILO® Laboratory AnalogReplicates the MILO™ Implant Platform ... MLA
MDL® O-Ring ReplacementsFor MICRO Housing (Quantity of 10) ... MDLMORFor LARGE Housing (Quantity of 10) ... MDLOR
Healing AbutmentsPlastic Healing Cap for Press Fit on O-Ball Assembly ... MLHC
YOUR GUIDE TO MDL® AND MILO® IMPLANTS
Cement-Over™ Abutments• Cements over O-Ball Assembly for fixed bridges
Straight ...................................................................................... MDLSA
• Cements over O-Ball Assembly for fixed bridges
Angulated 15° ...................................................................... MDLAA15
• Cements over O-Ball Assembly for fixed bridges
Wide ............................................................................................ WCA
• Plastic Castable Abutment for fixed bridges .............................. MDLPA
• Orthodontic Abutment fits over O-Ball Assembly ..................... MDLOA
Healing Abutments
• Plastic Healing Cap for Press Fit on O-Ball Assembly.................. MLHC
Mini Drive-Lock Metal Housing with O-Ring
• O-Ring encapsulated in MICRO Metal Housing .................. MDLMMH
• O-Ring encapsulated in LARGE Metal Housing ...................... MDLMH
MDL® O-Ring Replacements
• For MICRO Housing (Quantity of 10).................................... MDLMOR
• For LARGE Housing (Quantity of 10)........................................ MDLOR
Mini Drive-Lock Impression Coping
• Pick up Impression Coping .......................................................... MDLT
Mini Drive-Lock Laboratory Analog
• Replicates the MDL® Implant and Abutment................................ MDLA
MDLA
MDLOR MDLMOR
MDLMMHMDLMH
MLHC
Ref No.
MDLSA MDLAA15 WCA
MDLPA
MDLT
MDLOA
Prosthetic Components
Cement-Over™ Abutments*, available in Straight, 150 Angled, Wide, Plastic
Castable, and Orthodontic configurations, provide the clinician with an
unsurpassed range of prosthetic options. Cement-Over™ Abutments* can be
prepared extra orally and simply fit over the O-Ball Assembly. Once cemented in
place with resin cement, abutment and implant form one unit; resistant and strong
as a one-piece. An Analog and Impression Coping complement the system.
Cement-Over™ Abutment System
Cement-Over™ Abutments• Cements over O-Ball Assembly for fixed bridges
Straight ...................................................................................... MDLSA
• Cements over O-Ball Assembly for fixed bridges
Angulated 15° ...................................................................... MDLAA15
• Cements over O-Ball Assembly for fixed bridges
Wide ............................................................................................ WCA
• Plastic Castable Abutment for fixed bridges .............................. MDLPA
• Orthodontic Abutment fits over O-Ball Assembly ..................... MDLOA
Healing Abutments
• Plastic Healing Cap for Press Fit on O-Ball Assembly.................. MLHC
Mini Drive-Lock Metal Housing with O-Ring
• O-Ring encapsulated in MICRO Metal Housing .................. MDLMMH
• O-Ring encapsulated in LARGE Metal Housing ...................... MDLMH
MDL® O-Ring Replacements
• For MICRO Housing (Quantity of 10).................................... MDLMOR
• For LARGE Housing (Quantity of 10)........................................ MDLOR
Mini Drive-Lock Impression Coping
• Pick up Impression Coping .......................................................... MDLT
Mini Drive-Lock Laboratory Analog
• Replicates the MDL® Implant and Abutment................................ MDLA
MDLA
MDLOR MDLMOR
MDLMMHMDLMH
MLHC
Ref No.
MDLSA MDLAA15 WCA
MDLPA
MDLT
MDLOA
Prosthetic Components
Cement-Over™ Abutments*, available in Straight, 150 Angled, Wide, Plastic
Castable, and Orthodontic configurations, provide the clinician with an
unsurpassed range of prosthetic options. Cement-Over™ Abutments* can be
prepared extra orally and simply fit over the O-Ball Assembly. Once cemented in
place with resin cement, abutment and implant form one unit; resistant and strong
as a one-piece. An Analog and Impression Coping complement the system.
Cement-Over™ Abutment System
Cement-Over™ Abutments• Cements over O-Ball Assembly for fixed bridges
Straight ...................................................................................... MDLSA
• Cements over O-Ball Assembly for fixed bridges
Angulated 15° ...................................................................... MDLAA15
• Cements over O-Ball Assembly for fixed bridges
Wide ............................................................................................ WCA
• Plastic Castable Abutment for fixed bridges .............................. MDLPA
• Orthodontic Abutment fits over O-Ball Assembly ..................... MDLOA
Healing Abutments
• Plastic Healing Cap for Press Fit on O-Ball Assembly.................. MLHC
Mini Drive-Lock Metal Housing with O-Ring
• O-Ring encapsulated in MICRO Metal Housing .................. MDLMMH
• O-Ring encapsulated in LARGE Metal Housing ...................... MDLMH
MDL® O-Ring Replacements
• For MICRO Housing (Quantity of 10).................................... MDLMOR
• For LARGE Housing (Quantity of 10)........................................ MDLOR
Mini Drive-Lock Impression Coping
• Pick up Impression Coping .......................................................... MDLT
Mini Drive-Lock Laboratory Analog
• Replicates the MDL® Implant and Abutment................................ MDLA
MDLA
MDLOR MDLMOR
MDLMMHMDLMH
MLHC
Ref No.
MDLSA MDLAA15 WCA
MDLPA
MDLT
MDLOA
Prosthetic Components
Cement-Over™ Abutments*, available in Straight, 150 Angled, Wide, Plastic
Castable, and Orthodontic configurations, provide the clinician with an
unsurpassed range of prosthetic options. Cement-Over™ Abutments* can be
prepared extra orally and simply fit over the O-Ball Assembly. Once cemented in
place with resin cement, abutment and implant form one unit; resistant and strong
as a one-piece. An Analog and Impression Coping complement the system.
Cement-Over™ Abutment System
Cement-Over™ Abutments• Cements over O-Ball Assembly for fixed bridges
Straight ...................................................................................... MDLSA
• Cements over O-Ball Assembly for fixed bridges
Angulated 15° ...................................................................... MDLAA15
• Cements over O-Ball Assembly for fixed bridges
Wide ............................................................................................ WCA
• Plastic Castable Abutment for fixed bridges .............................. MDLPA
• Orthodontic Abutment fits over O-Ball Assembly ..................... MDLOA
Healing Abutments
• Plastic Healing Cap for Press Fit on O-Ball Assembly.................. MLHC
Mini Drive-Lock Metal Housing with O-Ring
• O-Ring encapsulated in MICRO Metal Housing .................. MDLMMH
• O-Ring encapsulated in LARGE Metal Housing ...................... MDLMH
MDL® O-Ring Replacements
• For MICRO Housing (Quantity of 10).................................... MDLMOR
• For LARGE Housing (Quantity of 10)........................................ MDLOR
Mini Drive-Lock Impression Coping
• Pick up Impression Coping .......................................................... MDLT
Mini Drive-Lock Laboratory Analog
• Replicates the MDL® Implant and Abutment................................ MDLA
MDLA
MDLOR MDLMOR
MDLMMHMDLMH
MLHC
Ref No.
MDLSA MDLAA15 WCA
MDLPA
MDLT
MDLOA
Prosthetic Components
Cement-Over™ Abutments*, available in Straight, 150 Angled, Wide, Plastic
Castable, and Orthodontic configurations, provide the clinician with an
unsurpassed range of prosthetic options. Cement-Over™ Abutments* can be
prepared extra orally and simply fit over the O-Ball Assembly. Once cemented in
place with resin cement, abutment and implant form one unit; resistant and strong
as a one-piece. An Analog and Impression Coping complement the system.
Cement-Over™ Abutment System
Cement-Over™ Abutments• Cements over O-Ball Assembly for fixed bridges
Straight ...................................................................................... MDLSA
• Cements over O-Ball Assembly for fixed bridges
Angulated 15° ...................................................................... MDLAA15
• Cements over O-Ball Assembly for fixed bridges
Wide ............................................................................................ WCA
• Plastic Castable Abutment for fixed bridges .............................. MDLPA
• Orthodontic Abutment fits over O-Ball Assembly ..................... MDLOA
Healing Abutments
• Plastic Healing Cap for Press Fit on O-Ball Assembly.................. MLHC
Mini Drive-Lock Metal Housing with O-Ring
• O-Ring encapsulated in MICRO Metal Housing .................. MDLMMH
• O-Ring encapsulated in LARGE Metal Housing ...................... MDLMH
MDL® O-Ring Replacements
• For MICRO Housing (Quantity of 10).................................... MDLMOR
• For LARGE Housing (Quantity of 10)........................................ MDLOR
Mini Drive-Lock Impression Coping
• Pick up Impression Coping .......................................................... MDLT
Mini Drive-Lock Laboratory Analog
• Replicates the MDL® Implant and Abutment................................ MDLA
MDLA
MDLOR MDLMOR
MDLMMHMDLMH
MLHC
Ref No.
MDLSA MDLAA15 WCA
MDLPA
MDLT
MDLOA
Prosthetic Components
Cement-Over™ Abutments*, available in Straight, 150 Angled, Wide, Plastic
Castable, and Orthodontic configurations, provide the clinician with an
unsurpassed range of prosthetic options. Cement-Over™ Abutments* can be
prepared extra orally and simply fit over the O-Ball Assembly. Once cemented in
place with resin cement, abutment and implant form one unit; resistant and strong
as a one-piece. An Analog and Impression Coping complement the system.
Cement-Over™ Abutment System
Cement-Over™ Abutments• Cements over O-Ball Assembly for fixed bridges
Straight ...................................................................................... MDLSA
• Cements over O-Ball Assembly for fixed bridges
Angulated 15° ...................................................................... MDLAA15
• Cements over O-Ball Assembly for fixed bridges
Wide ............................................................................................ WCA
• Plastic Castable Abutment for fixed bridges .............................. MDLPA
• Orthodontic Abutment fits over O-Ball Assembly ..................... MDLOA
Healing Abutments
• Plastic Healing Cap for Press Fit on O-Ball Assembly.................. MLHC
Mini Drive-Lock Metal Housing with O-Ring
• O-Ring encapsulated in MICRO Metal Housing .................. MDLMMH
• O-Ring encapsulated in LARGE Metal Housing ...................... MDLMH
MDL® O-Ring Replacements
• For MICRO Housing (Quantity of 10).................................... MDLMOR
• For LARGE Housing (Quantity of 10)........................................ MDLOR
Mini Drive-Lock Impression Coping
• Pick up Impression Coping .......................................................... MDLT
Mini Drive-Lock Laboratory Analog
• Replicates the MDL® Implant and Abutment................................ MDLA
MDLA
MDLOR MDLMOR
MDLMMHMDLMH
MLHC
Ref No.
MDLSA MDLAA15 WCA
MDLPA
MDLT
MDLOA
Prosthetic Components
Cement-Over™ Abutments*, available in Straight, 150 Angled, Wide, Plastic
Castable, and Orthodontic configurations, provide the clinician with an
unsurpassed range of prosthetic options. Cement-Over™ Abutments* can be
prepared extra orally and simply fit over the O-Ball Assembly. Once cemented in
place with resin cement, abutment and implant form one unit; resistant and strong
as a one-piece. An Analog and Impression Coping complement the system.
Cement-Over™ Abutment System
Cement-Over™ Abutments• Cements over O-Ball Assembly for fixed bridges
Straight ...................................................................................... MDLSA
• Cements over O-Ball Assembly for fixed bridges
Angulated 15° ...................................................................... MDLAA15
• Cements over O-Ball Assembly for fixed bridges
Wide ............................................................................................ WCA
• Plastic Castable Abutment for fixed bridges .............................. MDLPA
• Orthodontic Abutment fits over O-Ball Assembly ..................... MDLOA
Healing Abutments
• Plastic Healing Cap for Press Fit on O-Ball Assembly.................. MLHC
Mini Drive-Lock Metal Housing with O-Ring
• O-Ring encapsulated in MICRO Metal Housing .................. MDLMMH
• O-Ring encapsulated in LARGE Metal Housing ...................... MDLMH
MDL® O-Ring Replacements
• For MICRO Housing (Quantity of 10).................................... MDLMOR
• For LARGE Housing (Quantity of 10)........................................ MDLOR
Mini Drive-Lock Impression Coping
• Pick up Impression Coping .......................................................... MDLT
Mini Drive-Lock Laboratory Analog
• Replicates the MDL® Implant and Abutment................................ MDLA
MDLA
MDLOR MDLMOR
MDLMMHMDLMH
MLHC
Ref No.
MDLSA MDLAA15 WCA
MDLPA
MDLT
MDLOA
Prosthetic Components
Cement-Over™ Abutments*, available in Straight, 150 Angled, Wide, Plastic
Castable, and Orthodontic configurations, provide the clinician with an
unsurpassed range of prosthetic options. Cement-Over™ Abutments* can be
prepared extra orally and simply fit over the O-Ball Assembly. Once cemented in
place with resin cement, abutment and implant form one unit; resistant and strong
as a one-piece. An Analog and Impression Coping complement the system.
Cement-Over™ Abutment System
The thread length is 2mm less than the catalogue length
description
MDL® Prosthetic Components