Download - Dreve BioTec EN
BioTecSilicone ready to print.
Flexible, elastic andthermosensitive.
3D Print revolution
Creation of supportsKind of supports: Cone; Remove supports after postcuring
Biocompatibility tests according to:
DIN EN ISO 10993-5 Tests for in vitro cytotoxicity
(approx. 2 weeks)
DIN EN ISO 10993-10 Tests for irritation and skin sensitizations
(approx. 3 months)
Complete documentationincl. verifi cation and validation
according to medical devicedirective 93/42/EWG
(approx. 2 months)
Registration for Europe and US: approx. 9 months
BioTec as registered product available: approx. Q4/2019
Next steps
Facts For direct printing of fl exible earmolds without cast form
New material composition
Flexible silicone for DLP-3D printing
Elastic consistency
Thermosensitive characteristics
www.dreve.com
ProcessPrinter with UV LED with 385nm (e.g. Rapid Shape, Asiga)
build styles in progress
Cleaning in Isopropanol (97%) within a time of approx. 6 minutes (ultra sonic) and afterwards drying with compressed air
Post curing PCU LED N2
Sonolux Flash Evo
Mechanical propertiesHardness Tensile strength Elongation50–55 Shore A at 23 °C 45–50 Shore A at 37 °C (DIN ISO 7619-1)
2.5 MPa (DIN 53504)
100%(DIN 53504)